A target specificity switch in IS911 transposition: the role of the OrfA protein

The role played by insertion sequence IS911 proteins, OrfA and OrfAB, in the choice of a target for insertion was studied. IS911 transposition occurs in several steps: synapsis of the two transposon ends (IRR and IRL); formation of a figure-of-eight intermediate where both ends are joined by a single-strand bridge; resolution into a circular form carrying an IRR-IRL junction; and insertion into a DNA target. In vivo, with OrfAB alone, an IS911-based transposon integrated with high probability next to an IS911 end located on the target plasmid. OrfA greatly reduced the proportion of these events. This was confirmed in vitro using a transposon with a preformed IRR-IRL junction to examine the final insertion step. Addition of OrfA resulted in a large increase in insertion frequency and greatly increased the proportion of non-targeted insertions. The intermolecular reaction leading to targeted insertion may resemble the intramolecular reaction involving figure-of-eight molecules, which leads to the formation of circles. OrfA could, therefore, be considered as a molecular switch modulating the site-specific recombination activity of OrfAB and facilitating dispersion of the insertion sequence (IS) to 'non-homologous' target sites.     

Efficient transposition of IS911 circles in vitro.

An in vitro system has been developed which supports efficient integration of transposon circles derived from the bacterial insertion sequence IS911. Using relatively pure preparations of IS911-encoded proteins it has been demonstrated that integration into a suitable target required both the transposase, OrfAB, a fusion protein produced by translational frameshifting between two consecutive open reading frames, orfA and orfB, and OrfA, a protein synthesized independently from the upstream orfA. Intermolecular reaction products were identified in which one or both transposon ends were used. The reaction also generated various intramolecular transposition products including adjacent deletions and inversions. The circle junction, composed of abutted left and right IS ends, retained efficient integration activity when carried on a linear donor molecule, demonstrating that supercoiling in the donor molecule is not necessary for the reaction. Both two-ended integration and a lower level of single-ended insertions were observed under these conditions. The frequency of these events depended on the spacing between the transposon ends. Two-ended insertion was most efficient with a natural spacing of 3 bp. These results demonstrate that transposon circles can act as intermediates in IS911 transposition and provide evidence for collaboration between the two major IS911-encoded proteins, OrfA and OrfAB.     

IS911-mediated intramolecular transposition is naturally temperature sensitive

It is shown here that the bacterial insertion sequence IS 911 exhibits a temperature-sensitive transposition phenotype. Previous results have demonstrated that elevated levels of the IS 911 transposase OrfAB generate significant quantities of a figure-eight form, created by cleavage and circularization of one of the transposon strands, and of an excised circular form, in which both transposon strands have been circularized. We show here that the level of both types of molecule observed in vivo was greatly reduced at 42°C compared with 37°C. On the other hand, reducing the temperature to 30°C resulted in a significant increase in production. Transposition activity at this temperature was sufficiently high to permit detection in vivo of an excised circular form of a defective single IS 911 chromosomal copy when OrfAB is supplied in trans . A similar temperature–activity profile is observed for a cell-free reaction that uses partially purified OrfAB and generates the figure-eight form uniquely. Moreover, two point mutants of OrfAB were obtained, which render the reactions partially temperature resistant both in vivo and in vitro . These results suggest that some property of transposase itself is sensitive to elevated temperatures.     

The role of tandem IS dimers in IS911 transposition

Using a combined in vivo and in vitro approach, we demonstrated that the transposition products generated by IS911 from a dimeric donor plasmid are different from those generated from a plasmid monomer. When carried by a monomeric plasmid donor, free IS911 transposon circles are generated by intra-IS recombination in which one IS end undergoes attack by the other. These represent transposition intermediates that undergo integration using the abutted left (IRL) and right (IRR) ends of the element, the active IRR-IRL junction, to generate simple insertions. In contrast, the two IS911 copies carried by a dimeric donor plasmid not only underwent intra-IS recombination to generate transposon circles but additionally participated in inter-IS recombination. This also creates an active IRR-IRL junction by generating a head-to-tail IS tandem dimer ([IS]2) in which one of the original plasmid backbone copies is eliminated in the formation of the junction. Both transposon circles and IS tandem dimers are generated from an intermediate in which two transposon ends are retained by a single strand joint to generate a figure 8 molecule. Inter-IS figure 8 molecules generated in vitro could be resolved into the [IS]2 form following introduction into a host strain by transformation. Resolution did not require IS911 transposase. The [IS]2 structure was stable in the absence of transposase but was highly unstable in its presence both in vivo and in vitro. Previous studies had demonstrated that the IRR-IRL junction promotes efficient intermolecular integration and intramolecular deletions both in vivo and in vitro. Integration of the [IS]2 derivative would result in a product that resembles a co-integrate structure. It is also shown here that the IRR-IRL junction of the [IS]2 form and derivative structures can specifically target one of the other ends in an intramolecular transposition reaction to generate transposon circles in vitro. These results not only demonstrate that IS911 (and presumably other members of the IS3 family) is capable of generating a range of transposition products, it also provides a mechanistic framework which explains the formation and activity of such structures previously observed for several other unrelated IS elements. This behaviour is probably characteristic of a large number of IS elements.     

Transposase-induced excision and circularization of the bacterial insertion sequence IS911.

We have investigated the role of three IS911-specified proteins in transposition in vivo: the products of the upstream (OrfA) and downstream (OrfB) open reading frames, and a transframe protein (OrfAB) produced by -1 translational frameshifting between orfA and orfB. The production of OrfAB alone is shown to lead both to excision and to circularization of the element and to be sufficient for intermolecular transposition into a plasmid target. Simultaneous and independent production of OrfA is shown to stimulate OrfAB-mediated intermolecular transposition while greatly reducing the appearance of transposon circles. We have not been able to detect a role for OrfB. Although under certain conditions, the vector plasmid undergoes precise resealing after IS911 excision, the data suggest that this is not normally the case and that the donor plasmid is not generally conserved. The use of IS911 derivatives carrying mutations in the terminal 2 bp suggested that circle formation represents a site-specific intramolecular transposition event. We present a model which explains both intra- and intermolecular transposition events in terms of a single reaction mechanism of the 'cut and paste' type.     

The terminal inverted repeats of IS911: requirements for synaptic complex assembly and activity

The bacterial insertion sequence IS911 transposes via a covalently closed circular intermediate. Circle formation involves transposase-mediated pairing of both insertion sequence ends. While full-length transposase, OrfAB, binds poorly in vitro to IS911 DNA fragments carrying a copy of the IS911 end, truncated protein derivatives carrying the first 135 (OrfAB[1-135]) or 149 (OrfAB[1-149]) amino acid residues bind efficiently. They generate a paired-end complex containing two such fragments which resembles that expected for the first synaptic complex. Shorter protein derivatives lacking a region involved in multimerisation do not form these complexes but modify the binding of OrfAB[1-135] and OrfAB[1-149]. DNaseI footprinting demonstrated that OrfAB[1-149] protects a sub-terminal (internal) region of the inverted repeats which includes two blocks of sequence (beta and gamma) conserved between the left (IRL) and right (IRR) ends. DNA binding assays in vitro and measurement of recombination activity in vivo of sequential deletion derivatives of the two inverted repeats suggested a model in which the N-terminal region of OrfAB binds the conserved boxes beta and gamma in a sequence-specific manner and anchors the two insertion sequence ends into a paired-end complex. The external region of the inverted repeat is proposed to contact the C-terminal transposase domain carrying the catalytic site.     

Linearization and transposition of circular molecules of insertion sequence IS3.

IS3 transposase has been shown to promote production of characteristic circular and linear IS3 molecules from the IS3-carrying plasmid; IS3 circles have the entire IS3 sequence with terminal inverted repeats, IRL and IRR, which are separated by a three base-pair sequence originally flanking either end in the parental plasmid, whereas linear IS3 molecules have three nucleotide overhangs at their 5' ends. Here, we showed that a plasmid carrying an IS3 derivative, which is flanked by different sequences at both ends, generated IS3 circles and linear IS3 molecules owing to the action of transposase. Cloning and sequencing analyses of the linear molecules showed that each had the same 5'-protruding three nucleotide overhanging sequences at both ends, suggesting that the linear molecules were not generated from the parental plasmid by the two double-strand breaks at both end regions of IS3. The plasmid carrying IS3 with a two base-pair mutation in the terminal dinucleotide, which would be required for transposase to cleave the 3' end of IS3, could still generate linear molecules as well as circles. Plasmids bearing an IS3 circle were cleaved by transposase and gave linear molecules with the same 5'-protruding three nucleotide overhanging sequences. These show that the linear molecules are generated from IS3 circles via a double-strand break at the three base-pair intervening sequence. Plasmids carrying an IS3 circle with the two base-pair end mutation still were cleaved by transposase, though with reduced efficiencies, suggesting that IS3 transposase has the ability to cleave not only the 3' end of IS3, but a site three nucleotides from the 5' end of IS3. IS3 circles also were shown to transpose to the target plasmids. The end mutation almost completely inhibited this transposition, showing that the terminal dinucleotides are important for the transfer of the 3' end of IS3 to the target as well as for the end cleavage.     

Requirement of IS911 replication before integration defines a new bacterial transposition pathway

Movement of transposable elements is often accompanied by replication to ensure their proliferation. Replication is associated with both major classes of transposition mechanisms: cut-and-paste and cointegrate formation (paste-and-copy). Cut-and-paste transposition is often activated by replication of the transposon, while in cointegrate formation replication completes integration. We describe a novel transposition mechanism used by insertion sequence IS911, which we call copy-and-paste. IS911 transposes using a circular intermediate (circle), which then integrates into a target. We demonstrate that this is derived from a branched intermediate (figure-eight) in which both ends are joined by a single-strand bridge after a first-strand transfer. In vivo labelling experiments show that the process of circle formation is replicative. The results indicate that the replication pathway not only produces circles from figure-eight but also regenerates the transposon donor plasmid. To confirm the replicative mechanism, we have also used the Escherichia coli terminators (terC) which, when bound by the Tus protein, inhibit replication forks in a polarised manner. Finally, we demonstrate that the primase DnaG is essential, implicating a host-specific replication pathway.     

Control of IS911 target selection: how OrfA may ensure IS dispersion

IS911 transposition involves a closed circular insertion sequence intermediate (IS-circle) and two IS-encoded proteins: the transposase OrfAB and OrfA which regulates IS911 insertion. OrfAB alone promotes insertion preferentially next to DNA sequences resembling IS911 ends while the addition of OrfA strongly stimulates insertion principally into DNA targets devoid of the IS911 end sequences. OrfAB shares its N-terminal region with OrfA. This includes a helix-turn-helix (HTH) motif and the first three of four heptads of a leucine zipper (LZ). OrfAB binds specifically to IS911 ends via its HTH whereas OrfA does not. We show here: that OrfA binds DNA non-specifically and that this requires the HTH; that OrfA LZ is required for its multimerization; and that both motifs are essential for OrfA activity. We propose that these OrfA properties are required to assemble a nucleoprotein complex committed to random IS911 insertion. This control of IS911 insertion activity by OrfA in this way would assure its dispersion.     

Assembly of a strong promoter following IS911 circularization and the role of circles in transposition.

When supplied with high levels of the IS911-encoded transposase, IS911-based transposons can excise as circles in which the right and left terminal inverted repeats are abutted. Formation of the circle junction is shown here to create a promoter, p(junc), which is significantly stronger than the indigenous promoter, pIRL, and is also capable of driving expression of the IS911 transposition proteins. High transposase expression from the circular transposon may promote use of the circle as an integration substrate. The results demonstrate that IS911 circles are highly efficient substrates for insertion into a target molecule in vivo. Insertion leads to the disassembly of p(junc) and thus to a lower level of synthesis of the transposition proteins. The observation that normal levels of IS911 transposition proteins supplied by wild-type copies of IS911 are also capable of generating transposon circles, albeit at a low level, reinforces the idea that the transposon circles might form part of the natural transposition cycle of IS911. These observations form the elements of a feedback control mechanism and have been incorporated into a model describing one possible pathway of IS911 transposition.     

IS911 transpososome assembly as analysed by tethered particle motion

Initiation of transposition requires formation of a synaptic complex between both transposon ends and the transposase (Tpase), the enzyme which catalyses DNA cleavage and strand transfer and which ensures transposon mobility. We have used a single-molecule approach, tethered particle motion (TPM), to observe binding of a Tpase derivative, OrfAB[149], amputated for its C-terminal catalytic domain, to DNA molecules carrying one or two IS911 ends. Binding of OrfAB[149] to a single IS911 end provoked a small shortening of the DNA. This is consistent with a DNA bend introduced by protein binding to a single end. This was confirmed using a classic gel retardation assay with circularly permuted DNA substrates. When two ends were present on the tethered DNA in their natural, inverted, configuration, Tpase not only provoked the short reduction in length but also generated species with greatly reduce effective length consistent with DNA looping between the ends. Once formed, this 'looped' species was very stable. Kinetic analysis in real-time suggested that passage from the bound unlooped to the looped state could involve another species of intermediate length in which both transposon ends are bound. DNA carrying directly repeated ends also gave rise to the looped species but the level of the intermediate species was significantly enhanced. Its accumulation could reflect a less favourable synapse formation from this configuration than for the inverted ends. This is compatible with a model in which Tpase binds separately to and bends each end (the intermediate species) and protein-protein interactions then lead to synapsis (the looped species).     

Truncated forms of IS911 transposase downregulate transposition

IS911 naturally produces transposase (OrfAB) derivatives truncated at the C-terminal end (OrfAB-CTF) and devoid of the catalytic domain. A majority species, OrfAB*, was produced at higher levels at 42 degrees C than at 30 degrees C suggesting that it is at least partly responsible for the innate reduction in IS911 transposition activity at higher temperatures. An engineered equivalent of similar length, OrfAB[1-149], inhibited transposition activity in vivo or in vitro when produced along with full-length transposase. We isolated several point mutants showing higher activity than the wild-type IS911 at 42 degrees C. These fall into two regions of the transposase. One, located in the N-terminal segment of OrfAB, lies between or within two regions involved in protein multimerization. The other is located within the C-terminal catalytic domain. The N-terminal mutations resulted in reduced levels of OrfAB* while the C-terminal mutation alone appeared not to affect OrfAB* levels. Combination of N- and C-terminal mutations greatly reduced OrfAB* levels and transposition was concomitantly high even at 42 degrees C. The mechanism by which truncated transposase species are generated and how they intervene to reduce transposition activity is discussed. While transposition activity of these multiply mutated derivatives in vivo was resistant to temperature, the purified OrfAB derivatives retained an inherent temperature-sensitive phenotype in vitro. This clearly demonstrates that temperature sensitivity of IS911 transposition is a complex phenomenon with several mechanistic components. These results have important implications for the several other transposons and insertion sequences whose transposition has also been shown to be temperature-sensitive.     

Bias between the left and right inverted repeats during IS911 targeted insertion

IS911 is a bacterial insertion sequence composed of two consecutive overlapping open reading frames (ORFs [orfA and orfB]) encoding the transposase (OrfAB) as well as a regulatory protein (OrfA). These ORFs are bordered by terminal left and right inverted repeats (IRL and IRR, respectively) with several differences in nucleotide sequence. IS911 transposition is asymmetric: each end is cleaved on one strand to generate a free 3′-OH, which is then used as the nucleophile in attacking the opposite insertion sequence (IS) end to generate a free IS circle. This will be inserted into a new target site. We show here that the ends exhibit functional differences which, in vivo, may favor the use of one compared to the other during transposition. Electromobility shift assays showed that a truncated form of the transposase [OrfAB(1-149)] exhibits higher affinity for IRR than for IRL. While there was no detectable difference in IR activities during the early steps of transposition, IRR was more efficient during the final insertion steps. We show here that the differential activities between the two IRs correlate with the different affinities of OrfAB(1-149) for the IRs during assembly of the nucleoprotein complexes leading to transposition. We conclude that the two inverted repeats are not equivalent during IS911 transposition and that this asymmetry may intervene to determine the ordered assembly of the different protein-DNA complexes involved in the reaction.     

Two abundant intramolecular transposition products, resulting from reactions initiated at a single end, suggest that IS2 transposes by an unconventional pathway

The Escherichia coli insertion sequence, IS 2 , is a member of the IS 3 family of bacterial transposable elements. Its transposase is a fusion protein, OrfAB, made by a programmed −1 translational frameshift near to the end of orfA and just after the start of orfB . We have characterized two major products of IS 2 intramolecular transposition, which accumulate in cells that express the IS 2 OrfAB fusion protein at elevated levels. The more abundant product is a minicircle composed of the complete IS 2 with just a single basepair (occasionally 2 bp) separating the two IS ends. In all cases, this basepair is derived from the vector sequence immediately adjacent to the left IS 2 end (IRL). The second product is a figure-eight molecule that contains all the IS 2 and vector sequences present in the parental plasmid. One DNA strand contains the parental sequences unrearranged. The other contains a single-stranded version of the minicircle junction — the precise 3' end of IRR has been cleaved and joined to a target just outside the 5' end of IRL; the remaining vector sequences have a free 5' end, derived from cleavage at the 3' end of IRR, and a free 3' end, released upon cleavage of the target site adjacent to IRL. We propose that figure-eight molecules are the precursor to IS 2 minicircles and that the formation of these two products is the initial step in IS 2 intermolecular transposition. This proposed transposition pathway provides a means for a transposase that can cleave only one strand at each IS end to produce simple insertions and avoid forming co-integrates.     

In vitro transposition of ISY100, a bacterial insertion sequence belonging to the Tc1/mariner family

The Synechocystis sp. PCC6803 insertion sequence ISY100 (ISTcSa) belongs to the Tc1/mariner/IS630 family of transposable elements. ISY100 transposase was purified and shown to promote transposition in vitro. Transposase binds specifically to ISY100 terminal inverted repeat sequences via an N-terminal DNA-binding domain containing two helix-turn-helix motifs. Transposase is the only protein required for excision and integration of ISY100. Transposase made double-strand breaks on a supercoiled DNA molecule containing a mini-ISY100 transposon, cleaving exactly at the transposon 3' ends and two nucleotides inside the 5' ends. Cleavage of short linear substrates containing a single transposon end was less precise. Transposase also catalysed strand transfer, covalently joining the transposon 3' end to the target DNA. When a donor plasmid carrying a mini-ISY100 was incubated with a target plasmid and transposase, the most common products were insertions of one transposon end into the target DNA, but insertions of both ends at a single target site could be recovered after transformation into Escherichia coli. Insertions were almost exclusively into TA dinucleotides, and the target TA was duplicated on insertion. Our results demonstrate that there are no fundamental differences between the transposition mechanisms of IS630 family elements in bacteria and Tc1/mariner elements in higher eukaryotes.     

Tn7 transposition in vitro proceeds through an excised transposon intermediate generated by staggered breaks in DNA.

We have developed a cell-free system in which the bacterial transposon Tn7 inserts at high frequency into its preferred target site in the Escherichia coli chromosome, attTn7; Tn7 transposition in vitro requires ATP and Tn7-encoded proteins. Tn7 transposes via a cut and paste mechanism in which the element is excised from the donor DNA by staggered double-strand breaks and then inserted into attTn7 by the joining of 3' transposon ends to 5' target ends. Neither recombination intermediates nor products are observed in the absence of any protein component or DNA substrate. Thus, we suggest that Tn7 transposition occurs in a nucleoprotein complex containing several proteins and the substrate DNAs and that recognition of attTn7 within this complex provokes strand cleavages at the Tn7 ends.     

IS911 transposition is regulated by protein-protein interactions via a leucine zipper motif

Efficient intermolecular transposition of bacterial insertion sequence IS911 involves the activities of two element-encoded proteins: the transposase, OrfAB, and a regulatory factor, OrfA. OrfA shares the majority of its amino acid sequence with the N-terminal part of OrfAB. This includes a putative helix-turn-helix and three of four heptads of a leucine zipper motif. OrfA strongly stimulates OrfAB-mediated intermolecular transposition both in vivo and in vitro. The present results support the notion that this is accomplished by direct interaction between these two proteins via the leucine zipper. We used both a genetic approach, based on gene fusions with phage lambda repressor, and a physical approach, involving co-immunoprecipitation, to show that OrfA not only undergoes oligomerisation but is capable of engaging with OrfAB to form heteromultimers, and that the leucine zipper is necessary for both types of interaction. Furthermore, mutation of the leucine zipper in OrfA inactivated its regulatory function. Previous observations demonstrated that the integrity of the leucine zipper motif was also important for OrfAB binding to the IS911 terminal inverted repeats. Here, we show, in gel shift experiments, using a derivative of OrfAB deleted for the C-terminal catalytic domain, OrfAB[1-149], that the protein is capable of pairing two inverted repeats to generate a species resembling a "synaptic complex". Preincubation of OrfAB[1-149] with OrfA dramatically reduced formation of this complex and favored formation of an alternative complex devoid of OrfA. Together these results suggest that OrfA exerts its regulatory effect by interacting transiently with OrfAB via the leucine zipper and modifying OrfAB binding to the inverted repeats.     

Transposase-dependent formation of circular IS256 derivatives in Staphylococcus epidermidis and Staphylococcus aureus

IS256 is a highly active insertion sequence (IS) element of multiresistant staphylococci and enterococci. Here we show that, in a Staphylococcus epidermidis clinical isolate, as well as in recombinant Staphylococcus aureus and Escherichia coli carrying a single IS256 insertion on a plasmid, IS256 excises as an extrachromosomal circular DNA molecule. First, circles were identified that contained a complete copy of IS256. In this case, the sequence connecting the left and right ends of IS256 was derived from flanking DNA sequences of the parental genetic locus. Second, circle junctions were detected in which one end of IS256 was truncated. Nucleotide sequencing of circle junctions revealed that (i) either end of IS256 can attack the opposite terminus and (ii) the circle junctions vary significantly in size. Upon deletion of the IS256 open reading frame at the 3' end and site-directed mutageneses of the putative DDE motif, circular IS256 molecules were no longer detectable, which implicates the IS256-encoded transposase protein with the circularization of the element.     

In vitro reconstitution of a single-stranded transposition mechanism of IS608

Bacterial insertion sequences (IS) play an important role in restructuring their host genomes. IS608, from Helicobacter pylori, belongs to a newly recognized and widespread IS group with a unique transposition mechanism. We have reconstituted the entire set of transposition cleavage and strand transfer reactions in vitro and find that, unlike any other known transposition system, they strictly require single-strand DNA. TnpA, the shortest identified transposase, uses a nucleophilic tyrosine for these reactions. It recognizes and cleaves only the IS608 "top strand." The results support a transposition model involving excision of a single-strand circle with abutted left (LE) and right (RE) IS ends. Insertion occurs site specifically 3' to conserved and essential TTAC tetranucleotide and appears to be driven by LE. This single-strand transposition mode has important implications not only for dispersion of IS608 but also for the other members of this very large IS family.     

ATP hydrolysis and the displaced strand are two factors that determine the polarity of RecA-promoted DNA strand exchange.

When the recA protein (RecA) of Escherichia coli promotes strand exchange between single-stranded DNA (ssDNA) circles and linear double-stranded DNAs (dsDNA) with complementary 5' or 3' ends a polarity is observed. This property of RecA depends on ATP hydrolysis and the ssDNA that is displaced in the reaction since no polarity is observed in the presence of the non-hydrolyzable ATP analog, ATP gamma S, or in the presence of single-strand specific exonucleases. Based on these results a model is presented in which both the 5' and 3' complementary ends of the linear dsDNA initiate pairing with the ssDNA circle but only one end remains stably paired. According to this model, the association/dissociation of RecA in the 5' to 3' direction on the displaced strand determines the polarity of strand exchange by favoring or blocking its reinvasion into the newly formed dsDNA. Reinvasion is favored when the displaced strand is coated with RecA whereas it is blocked when it lacks RecA, remains covered by single-stranded DNA binding protein or is removed by a single-strand specific exonuclease. The requirement for ATP hydrolysis is explained if the binding of RecA to the displaced strand occurs via the dissociation and/or transfer of RecA, two functions that depend on ATP hydrolysis. The energy for strand exchange derives from the higher binding constant of RecA for the newly formed dsDNA as compared with that for ssDNA and not from ATP hydrolysis.