Comparative investigations of growth and solvent formation in ‘Clostridium saccharoperbutylacetonicum’ DSM 2152 and Clostridium acetobutylicum DSM 792

The butanol and acetone-producing strain DSM 2152, invalidly described as ‘Clostridium saccharoperbutylacetonicum’ is compared with the type strain C. acetobutylicum, DSM 792, with respect to solvent and acid formation at varying pH values and growth rates. Batch cultures, product-limited chemostat and pH-auxostat cultures were used for characterization. Under all conditions strain DSM 2152 produced much lower amounts of butyric and acetic acids than the type strain. The pH optimum for solvent formation was higher, ie 5.5 instead of 4.5. Solvent formation occurred at higher dilution rates, but below 0.1 h⁻¹ a lower solvent concentration was obtained, indicating that acid production was too low to provide a sufficient amount for acetone formation. The results are discussed in the light of recent publications on the taxonomy of butanol-acetone producing clostridia using 16S rRNA sequence analysis and other nucleic acid data. The presently suggested ‘phylogenetic’ classification of the collective species, C. acetobutylicum, is also reflected in the fermentation characteristics. Received 21 December 1998/ Accepted in revised form 22 January 1999     

Immobilization of Clostridium acetobutylicum DSM 792 as macroporous aggregates through cryogelation for butanol production

In this study, a new cell immobilization technique is presented. Cells of Clostridium acetobutylicum DSM 792 form a macroporous aggregate through cryogelation with concomitant crosslinking together with activated polyethyleneimine (PEI) and poly(vinyl alcohol) (PVA). The cell based cryogel presents a highly porous, elastic structure with walls consisting of densely packed crosslinked cells. The immobilization process maintained the viability of cells as new bacterial cells were observed when gel-plugs were incubated in liquid medium, glucose was consumed and solvent production was observed. Solvent production was improved 2.7-fold in immobilized cells in comparison to free cells. It was possible to reuse the gel-plugs 3–5 times in partial or completely fresh medium, reaching a maximum butanol concentration in the broth of 18.2 g/l and yield of 0.41 (g/g) in one of the cycles. The use of cells based cryogels can be a good alternative for improvement of acetone-butanol-ethanol (ABE) process as cells are immobilized in a macroporous structure with low limitations for mass transfer with potential for high yield production.     

Secretory production of biologically active rat interleukin-2 by Clostridium acetobutylicum DSM792 as a tool for anti-tumor treatment

A bacterium, isolated from contaminated soils around a chemical factory and named strain DSP3 was capable of biodegrading both chlorpyrifos and 3,5,6-trichloro-2-pyridinol. Based on the results of phenotypic features, phylogenetic similarity of 16S rRNA gene sequences, DNA G+C content, and DNA homology between strain DSP3 and reference strains, strain DSP3 was identified as Alcaligenes faecalis. Chlorpyrifos was utilized as the sole source of carbon and phosphorus by strain DSP3. We examined the role of strain DSP3 in the degradation of chlorpyrifos and 3,5,6-trichloro-2-pyridinol under different culture conditions. Parathion and diazinon could also be degraded by strain DSP3 when provided as the sole sources of carbon and phosphorus. An addition of strain DSP3 (10(8)cells g(-1)) to soil with chlorpyrifos (100 mg kg(-1)) resulted in a higher degradation rate than the one obtained from non-inoculated soils. Different degradation rates of chlorpyrifos in six types of treated soils suggested that soils used for cabbage growing in combination with inoculation of strain DSP3 showed enhanced microbial degradation of chlorpyrifos.     

Isolation of a single-stranded plasmid from Clostridium acetobutylicum NCIB 6444

The cryptic plasmid pDM6 was isolated from late exponential-phase cells of Clostridium acetobutylicum NCIB 6444 by either alkaline lysis or electroporation. The application of high voltage during electroporation resulted in higher DNA yield than did the alkaline lysis procedure. However, electroporation-induced plasmid release generated high amounts of single-stranded DNA compared with the alkaline lysis procedure, which generated both double-stranded DNA (monomer and dimer forms) and single-stranded DNA.     

Isolation of a single-stranded plasmid from Clostridium acetobutylicum NCIB 6444.

The cryptic plasmid pDM6 was isolated from late exponential-phase cells of Clostridium acetobutylicum NCIB 6444 by either alkaline lysis or electroporation. The application of high voltage during electroporation resulted in higher DNA yield than did the alkaline lysis procedure. However, electroporation-induced plasmid release generated high amounts of single-stranded DNA compared with the alkaline lysis procedure, which generated both double-stranded DNA (monomer and dimer forms) and single-stranded DNA.     

Metronidazole activation and isolation of Clostridium acetobutylicum electron transport genes

An Escherichia coli F19 recA, nitrate reductase-deficient mutant was constructed by transposon mutagenesis and shown to be resistant to metronidazole. This mutant was a most suitable host for the isolation of Clostridium acetobutylicum genes on recombinant plasmids, which activated metronidazole and rendered the E. coli F19 strain sensitive to metronidazole. Twenty-five E. coli F19 clones containing different recombinant plasmids were isolated and classified into five groups on the basis of their sensitivity to metronidazole. The clones were tested for nitrate reductase, pyruvate-ferredoxin oxidoreductase, and hydrogenase activities. DNA hybridization and restriction endonuclease mapping revealed that four of the C. acetobutylicum insert DNA fragments on recombinant plasmids were linked in an 11.1-kb chromosomal fragment. DNA sequencing and amino acid homology studies indicated that this DNA fragment contained a flavodoxin gene which encoded a protein of 160 amino acids that activated metronidazole and made the E. coli F19 mutant very sensitive to metronidazole. The flavodoxin and hydrogenase genes which are involved in electron transfer systems were linked on the 11.1-kb DNA fragment from C. acetobutylicum.     

Butyrate kinase from Clostridium acetobutylicum

Crude extracts of Clostridium acetobutylicum contain a butyrate kinase of high specific activity (5.2 mumol/min/mg of protein). The enzyme has been purified 77-fold in a six-step procedure to a specific activity of 402 mumol/min/mg of protein. The purified butyrate kinase showed a single band with a molecular weight of 85,000 on nondenaturing polyacrylamide gradient gel electrophoresis. Separation by sodium dodecyl sulfate-polyacrylamide gel electrophoresis indicated that the enzyme is a dimer of two apparently identical subunits with molecular weights of 39,000. The pH optimum for the reaction in the butyryl phosphate-forming direction is 7.5, and the pI of the kinase is 5.6. The amino acid composition of the enzyme is also reported. It contains no tryptophan and is low in sulfur-containing amino acids. The kinase has a broad substrate specificity and exhibits its highest relative activities with butyrate and valerate. Butyrate kinase is rapidly inactivated at 50 degrees C in the absence of a fatty acid substrate. Although a reducing agent was required for maximum activity, treatment with several sulfhydryl-modifying agents failed to inhibit the enzyme.     

Modified plasmid isolation method for Clostridium perfringens and Clostridium absonum

A rapid plasmid isolation procedure for Clostridium perfringens and C. absonum is described. The ratio of culture volume to lysis buffer volume was found to be crucial for efficient plasmid isolation. The method can be scaled up, without difficulty, for large-scale plasmid preparation.     

Complete genome sequence of Clostridium acetobutylicum DSM 1731, a solvent-producing strain with multireplicon genome architecture

Clostridium acetobutylicum is an important microorganism for solvent production. We report the complete genome sequence of C. acetobutylicum DSM 1731, a genome with multireplicon architecture. Comparison with the sequenced type strain C. acetobutylicum ATCC 824, the genome of strain DSM1731 harbors a 1.7-kb insertion and a novel 11.1-kb plasmid, which might have been acquired during evolution.     

Modified plasmid isolation method for Clostridium perfringens and Clostridium absonum.

A rapid plasmid isolation procedure for Clostridium perfringens and C. absonum is described. The ratio of culture volume to lysis buffer volume was found to be crucial for efficient plasmid isolation. The method can be scaled up, without difficulty, for large-scale plasmid preparation.     

Photoreactivating capacity in Clostridium butyricum and Clostridium acetobutylicum

No difference in survival was observed when u.v.-irradiated clostridial cells were subsequently incubated in the dark or exposed to photoreactivating light. This suggests that photoreactivation does not occur in Clostridium butyricum and in Clostridium acetohutylicum.     

Conjugal transfer of plasmid pAMβ1 from Streptococcus lactis and Bacillus subtilis to Clostridium acetobutylicum

Abstract A filter mating procedure has been used to transfer the plasmid pAMβ;1 from Streptococcus lactis to Clostridium acetobutylicum at high efficiency. Once established in this latter host the plasmid can be transferred, with lower efficiency to other strains of C. acetobutylicum or back to S. lactis . A procedure has also been developed for the co-cultivation of Bacillus subtilis and C. acetobutylicum and the transfer of pAMβ;1 between these organisms has been demonstrated.     

Cloning, Expression, and Purification of Glutamine Synthetase from Clostridium acetobutylicum

A glutamine synthetase (GS) gene, glnA, from the gram-positive obligate anaerobe Clostridium acetobutylicum was cloned on recombinant plasmid pHZ200 and enabled Escherichia coli glnA deletion mutants to utilize (NH₄)₂SO₄ as a sole source of nitrogen. The cloned C. acetobutylicum gene was expressed from a regulatory region contained within the cloned DNA fragment. glnA expression was subject to nitrogen regulation in E. coli. This cloned glnA DNA did not enable an E. coli glnA ntrB ntrC deletion mutant to utilize arginine or low levels of glutamine as sole nitrogen sources, and failed to activate histidase activity in this strain which contained the Klebsiella aerogenes hut operon. The GS produced by pHZ200 was purified and had an apparent subunit molecular weight of approximately 59,000. There was no DNA or protein homology between the cloned C. acetobutylicum glnA gene and GS and the corresponding gene and GS from E. coli. The C. acetobutylicum GS was inhibited by Mg²⁺ in the γ-glutamyl transferase assay, but there was no evidence that the GS was adenylylated.     

Mutagenesis of Clostridium acetobutylicum

Mutagenesis of the obligate anaerobe Clostridium acetobutylicum was best accomplished using agents (e.g. ethyl methane sulphonate or N -methyl- N '-nitro- N -nitrosoguanidine) which are believed to act by a direct mutagenic mechanism. Other agents (e.g. u.v. radiation) whose effectiveness relies on misrepair of damaged DNA via an error-prone pathway, were poor mutagens of this organism. Procedures are described which readily yielded a variety of auxotrophic and other useful mutant strains of Cl. acetobutylicum and related saccharolytic clostridia.     

Mutagenesis of Clostridium acetobutylicum

Mutagenesis of the obligate anaerobe Clostridium acetobutylicum was best accomplished using agents (e.g. ethyl methane sulphonate or N-methyl-N'-nitro-N-nitrosoguanidine) which are believed to act by a direct mutagenic mechanism. Other agents (e.g. u.v. radiation) whose effectiveness relies on misrepair of damaged DNA via an error-prone pathway, were poor mutagens of this organism. Procedures are described which readily yielded a variety of auxotrophic and other useful mutant strains of Cl. acetobutylicum and related saccharolytic clostridia.