Survey of Chemical Compounds Tested In Vitro against Rumen Protozoa for Possible Control of Bloat

Over 170 chemical agents were screened for antiprotozoal action in bovine ruminal fluid. Compounds were tested at 0.1 and 0.05% concentrations. Tested compounds included inorganic compounds, antibiotics, biocides, neuromuscular agents, arsenicals, plant and animal hormones, antimalarials, surface-active agents, anthelmintics, and many others. The most active compounds were cupric sulfate, nickel sulfate, nitrofurazone, hydrogen peroxide, dodecyl sodium sulfate, pelargonic acid, iodoacetic acid, 1-diethylaminoethylamino-4-methylthiaxanthrone, sodium arsanilate, sodium arsenate, bismuth glycolyl arsanilate, 1-β-hydroxyethyl-2-methyl-5-nitroimidazole, and p-nitroaniline. Copper ion was not particularly effective against entodinia; nickel ion had no effect on holotrichs. Hydrogen peroxide and iodoacetic acid were effective at a concentration of 0.005%. Anionic surface-active agents were very effective, especially long-chain sulfates and phosphates. These antiprotozoal agents warrant further in vivo studies for possible use in treating or curing bloat in ruminants.     

Transduction of penicillinase production in Staphylococcus epidermidis and nature of the genetic determinant.

Four strains of Staphylococcus epidermidis from clinical sources were capable of serving as donors for the transduction of either penicillinase production, ethidium bromide resistance, or tetracycline resistance. Three typing phages served as transducing phages and, depending upon the combination of transducing phage, donor strain, and recipient strain, the rates of transduction ranged between 10(-5) and 10(-9). In one strain, cotransduction of penicillinase production and ethidium bromide resistance was observed. Although ultraviolet irradiation kinetics indicated that both the tetracycline resistance and the penicillin resistance determinants were located on plasmids, only resistance to tetracycline could be eliminated by growth in the presence of curing agents or at elevated temperature. However, evidence was obtained by agarose gel electrophoretic studies that both the tetracycline resistance and the penicillin resistance determinants are located on separate plasmids in this organism.     

Chemical and electron microscopic studies of factors associated with the release of penicillinase from Staphylococcus aureus

The effect of various factors such as sodium chloride, sodium citrate, pH, buffers, and enzymatic and physical disruption of cells on the release of penicillinase by Staphylococcus aureus ATCC 14458 was investigated. Penicillinase was measured at selected time intervals from supernates of cultures grown in Antibiotic Medium 3 broth containing various concentrations of salts or buffers or from supernates of cultures treated with lysostaphin and subsequently disrupted by French press treatment.Incubation of cells with media containing either sodium chloride (5, 10, and 15%), sodium citrate (5 and 10%), or organic buffers (Tris-HC1, 2.5, 5.0, and 7.5%; BES, 10 and 20%) resulted in a significant stimulation of the release of penicillinase when compared to control cells. It was also observed that pH 7.0–7.5 was optimal for penicillinase activity and release. From studies of enzymatic and mechanical disruption of cells, it was observed that an increase in ionic strength of the suspending medium to certain optimal levels appeared to stimulate the conversion of penicillinase to an extracellular form.Electron microscopic studies revealed that a large number of mesosomal vesicles seemed to be present in cells incubated for 4 hours in media containing various concentrations of sodium chloride. It is proposed that either appearance of vesicles or convolution of cell membrane, which may be caused by further synthesis of new membrane, is involved in stimulation of the synthesis and release of membrane-bound penicillinase.     

Relation Between Iron Uptake, pH of Growth Medium, and Penicillinase Formation in Staphylococcus aureus

The uptake of iron and the formation of penicillinase was examined in cultures of wild-type Staphylococcus aureus. Uptake of iron was about twice as great at pH 4.7 as at pH 7.4 At pH 4.7, increase in iron uptake in the range of 1.0 to 4.0 μg per mg of bacterial protein was associated with a progressive increase in the rate of penicillinase formation, but a direct correlation between cellular iron content and rate of enzyme formation was not demonstrated. Addition of iron to deferrated medium enhanced penicillinase formation at pH 6.5 to 7.4 two- to fourfold in cultures induced with benzylpenicillin and in uninduced cultures. To demonstrate an effect on the uninduced cells, it was necessary to increase iron uptake by preliminary incubation of cells with iron in buffer. Calcium and certain other ions depressed iron uptake at acidic and at neutral pH, and, presumably as a result of this action, depressed the formation of penicillinase. Iron did not enhance penicillinase formation at pH 4.7 by two penicillinase constitutive mutants nor by wild-type cells undergoing induction at pH 6.5 by cephalosporin C or methicillin. After removal of cephalosporin C or methicillin during an early phase of induction, residual synthesis of enzyme was increased by prior uptake of iron. The results are considered compatible with the concept that uptake of iron, especially at acidic pH, interferes with the formation or function of penicillinase repressor.     

Lytic agents, cell permeability, and monolayer penetrability

Cell lysis induced by lytic agents is the terminal phase of a series of events leading to membrane disorganization and breadkdown with the release of cellular macromolecules. Permeability changes following exposure to lytic systems may range from selective effects on ion fluxes to gross membrane damage and cell leakage. Lysis can be conceived as an interfacial phenomenon, and the action of surface-active agents on erythrocytes has provided a model in which to investigate relationships between hemolysis and chemical structure, ionic charge, surface tension lowering, and ability to penetrate monolayers of membrane lipid components. Evidence suggests that lysis follows the attainment of surface pressures exceeding a "critical collapse" level and could involve membrane cholesterol or phospholipid. Similarities of chemical composition of membranes from various cell types could account for lytic responses observed on interaction with surface-active agents. Cell membranes usually contain about 20–30 % lipid and 50–75 % protein. One or two major phospholipids are present in all cell membranes, but sterols are not detectable in bacterial membranes other than those of the Mycoplasma group. The rigid cell wall in bacteria has an important bearing on their response to treatment with lytic agents. Removal of the wall renders the protoplast membrane sensitive to rapid lysis with surfactants. Isolated membranes of erythrocytes and bacteria are rapidly dissociated by surface-active agents. Products of dissociation of bacterial membranes have uniform behavior in the ultracentrifuge (sedimentation coefficients 2–3S). Dissociation of membrane proteins from lipids and the isolation and characterization of these proteins will provide a basis for investigating the specificity of interaction of lytic agents with biomembranes.     

Stimulatory effect of selected surface-active agents on the growth of pathogenic human fungi

Summary The growth ofCryptococcus neoformans andCandida albicans in Sabouraud's dextrose broth with added surface-active agents was measured by nephelometric methods. The surface-active agents was measured by nephelometric methods. The surface-active agents utilized were Polyethylene glycol 400 monolaurate, Pluronic L 64, and Mulsor 224. These three compounds definitely stimulated the growth of the above organisms as indicated in the accompanying tables. The nephelometric runs were corroborated with plate counts taken at suitable intervals.This project was supported by Research Grant E-1045(R) of the National Institute of Health, United States Public Health Service.     

Phenotypic Suppression of Methicillin Resistance in Staphylococcus aureus by Mutant Noninducible Penicillinase Plasmids

Methicillin (intrinsic) resistance of Staphylococcus aureus was suppressed almost completely by regulatory gene (penI₁) mutations of penicillinase plasmids that made penicillinase production strictly noninducible. Methicillin resistance was restored by secondary regulatory gene mutations that altered the noninducible phenotype or by complementation with a compatible plasmid that did not bear the noninducible mutation. No evidence was obtained for genetic linkage between a penicillinase plasmid and the gene for methicillin resistance. We suggest, therefore, that the mutant noninducible repressor acted in trans by binding to a site on the methicillin resistance determinant. This hypothesis would imply an appreciable degree of homology between penicillinase plasmids and methicillin resistance genes.     

Synonymous codon usage in forty staphylococcal phages identifies the factors controlling codon usage variation and the phages suitable for phage therapy

The immergence and dissemination of multidrug-resistant strains of Staphylococcus aureus in recent years have expedited the research on the discovery of novel anti-staphylococcal agents promptly. Bacteriophages have long been showing tremendous potentialities in curing the infections caused by various pathogenic bacteria including S. aureus. Thus far, only a few virulent bacteriophages, which do not carry any toxin-encoding gene but are capable of eradicating staphylococcal infections, were reported. Based on the codon usage analysis of sixteen S. aureus phages, previously three phages were suggested to be useful as the anti-staphylococcal agents. To search for additional S. aureus phages suitable for phage therapy, relative synonymous codon usage bias has been investigated in the protein-coding genes of forty new staphylococcal phages. All phages appeared to carry A and T ending codons. Several factors such as mutational pressure, translational selection and gene length seemed to be responsible for the codon usage variation in the phages. Codon usage indeed varied phage to phage. Of the phages, phages G1, Twort, 66 and Sap-2 may be extremely lytic in nature as majority of their genes possess high translational efficiency, indicating that these phages may be employed in curing staphylococcal infections.     

A frameshift mutation that elongates the penicillinase protein of Bacillus licheniformis

A penicillinase mutant penP102, isolated after ICR (acridine mustard) mutagenesis of Bacillus licheniformis strain 749/C, retains about 50% of the wild-type penicillinase specific activity. The penicillinase produced by this mutant differs from the wild-type protein in its sensitivity to pH and its electrophoretic behaviour. The penP102 mutation appears to have several other phenotypic effects, including an increase in the efficiency of release of the extracellular form of the enzyme.The penP102 penicillinase has been purified and its amino acid sequence compared to that of the wild-type enzyme. The mutation has resulted in the replacement of the last three amino acids of the wild-type enzyme and the addition of 17 residues at the carboxy-terminus. Comparison of the wild-type and mutant amino acid sequences shows that the mutational event is a single nucleotide deletion from the codon for asparagine²⁶⁵. Consideration of the possible nucleotide sequence for the region beyond the carboxy-terminus of the wild-type protein shows that there are no possible termination codons until four and six triplets beyond the codon for the carboxy-terminal lysine, indicating that the carboxy-terminus of the wild-type extracellular penicillinase is generated by proteolytic cleavage of a larger precursor protein.     

Effect of Surface-Active Pseudomonas spp. on Leaf Wettability

Different strains of Pseudomonas putida and P. fluorescens isolated from the rhizosphere and phyllosphere were tested for surface activity in droplet cultures on polystyrene. Droplets of 6 of the 12 wild types tested spread over the surface during incubation, and these strains were considered surface active; strains not showing this reaction were considered non-surface active. Similar reactions were observed on pieces of wheat leaves. Supernatants from centrifuged broth cultures behaved like droplets of suspensions in broth; exposure to 100°C destroyed the activity. Average contact angles of the supernatants of surface-active and non-surface-active strains on polystyrene were 24° and 72°, respectively. The minimal surface tension of supernatants of the surface-active strains was about 46 mN/m, whereas that of the non-surface-active strains was 64 mN/m (estimations from Zisman plots). After 6 days of incubation, wheat flag leaves sprayed with a dilute suspension of a surface-active strain of P. putida (WCS 358RR) showed a significant increase in leaf wettability, which was determined by contact angle measurements. Increasing the initial concentration of bacteria and the amount of nutrients in the inoculum sprayed on leaves reduced the contact angles from 138° on leaves treated with antibiotics (control) to 43° on leaves treated with surface-active bacteria. A closely related strain with no surface activity on polystyrene did not affect leaf wettability, although it was present in densities similar to those of the surface-active strain. Nutrients alone could occasionally also increase leaf wettability, apparently by stimulating naturally occurring surface-active bacteria. When estimating densities of Pseudomonas spp. underneath droplets with low contact angles, it appeared that populations on leaves treated with a surface-active strain could vary from about 10⁴ to 10⁶ CFU cm⁻², suggesting that the surface effect may be prolonged after a decline of the population. The possible ecological implications are discussed.     

Identification of peptide inhibitors of penicillinase using a phage display library

There is a constant need to identify novel inhibitors to combat β-lactamase-mediated antibiotic resistance. In this study, we identify three penicillinase-binding peptides, P1 (DHIHRSYRGEFD), P2 (NIYTTPWGSNWS), and P3 (SHSLPASADLRR), using a phage display library. Surface plasmon resonance (SPR) is utilized for quantitative determination and comparison of the binding specificity of selected peptides to penicillinase. An SPR biosensor functionalized with P3-GGGC (SHSLPASADLRRGGGC) is developed for detection of penicillinase with excellent sensitivity (15.8 RU nM⁻¹) and binding affinity (K_D = 0.56 nM). To determine if peptides can be good inhibitors for penicillinase, these peptides are mixed with penicillinase and their inhibition efficiency is determined by measuring the hydrolysis of substrate penicillin G using UV–vis spectrophotometry. Peptide P2 (NIYTTPWGSNWS) is found to be a promising penicillinase inhibitor with a K_i of 9.22 μM and a K_i′ of 33.12 μM, suggesting that the inhibition mechanism is a mixed pattern. This peptide inhibitor (P2) can be used as a lead compound to identify more potent small molecule inhibitors for penicillinase. This study offers a potential approach to both detection of β-lactamases and development of novel inhibitors of β-lactamases.     

Characterization of mutations in the penicillinase operon of Staphylococcus aureus

Summary Mutant penicillinase plasmids, in which penicillinase synthesis is not inducible by penicillin or a penicillin analogue, were examined by biochemical and genetic analyses. In five of the six mutants tested, penicillinase synthesis could be induced by growth in the presence of 5-methyltryptophan. It is known that the tryptophan analogue 5-methyltryptophan is readily incorporated into protein by S. aureus and that staphylococcal penicillinase lacks tryptophan. 5-methyltryptophan seems to induce penicillinase synthesis in wild-type plasmids by becoming incorporated into the repressor and thereby inactivating the operator binding function of the penicillinase repressor. Therefore, induction of penicillinase synthesis in the mutant plasmids by 5-methyltryptophan strongly suggests that the noninducible phenotype of these five plasmids is due to a mutation that inactivates the effector binding site of the penicillinase repressor (i.e., the five mutant plasmids carry an i^s genotype for the penicillinase repressor). This conclusion was supported by heterodiploid analysis. The mutant plasmid that did not respond to 5-methyltryptophan either produces an exceedingly low basal level of penicillinase or does not produce active enzyme. This plasmid seems to carry a mutation in the penicillinase structural gene or in the promoter for the structural gene. Thus, a genetic characterization of many mutations in the penicillinase operon can be accomplished easily and rapidly by biochemical analysis.Journal Paper No. J-7994 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Project No. 2029     

The polycistronic nature of the penicillinase structural and regulatory genes in Bacillus licheniformis

A frameshift mutation that affects the carboxy-terminal sequence of penicillinase has been shown to map at the end of the penicillinase structural gene, penP, which is near the linked regulatory gene, penI. The mutation appears to be polar on penI, suggesting that the penP and penI genes are in one operon, which is read in the direction P→I.     

Effects of ethidium bromide on growth and on loss of the penicillinase plasmid of Staphylococcus aureus

Ethidium bromide (EB) was more efficient than ethyl violet or rifampin as a curing agent for the penicillinase plasmids of Staphylococcus aureus strains. The effects of EB on growth and on the loss of the penicillinase plasmid of PS 81 were studied in detail. The growth rates of PS 81 and an EB-cured derivative were identical in broth, but the cured derivative had a shorter lag in the presence of added 6 x 10(-6)m EB. The shortened lag was due to prior exposure to EB as the cured derivative and an EB-treated but uncured strain of PS 81 gave identical growth lag and growth rates in the presence of EB. The curing of PS 81 by EB occurs in three phases. After a 4 to 5 hr lag, there is a 100-fold increase in the number of penicillinase-negative cells, and the proportion of cured cells continues to rise until 10 to 12 hr. Thereafter, the population becomes refractory to further curing, and the proportion of penicillinase-negative cells remains constant at about 20% of the total. Penicillinase-positive survivors of EB treatment showed increased EB resistance and were cured at lower rates upon subsequent EB treatment. Isolated colonies of the parental strain PS 81 were heterogeneous in their EB sensitivity. Thus, EB does not competitively favor spontaneously cured penicillinase-negative cells but appears to act in a manner analogous to acridine orange on the plasmids of enteric bacteria.     

Characteristics of Penicillinase Secretion by Growing Cells and Protoplasts of Bacillus licheniformis

Cultures of the inducible penicillinase-producing strain 749 of Bacillus licheniformis, induced with small amounts of benzylpenicillin, synthesized penicillinase at a high rate for a short period, after which the rate of synthesis slowly declined. During the period of active synthesis, the rate of secretion, as a fraction of the level of cell-bound penicillinase (which is originally high), gradually decreased to a constant level. Chloramphenicol, at a concentration (40 mug/ml) which completely inhibited synthesis of penicillinase, partially inhibited secretion if added during the period of active synthesis. During the phase of reduced synthesis, chloramphenicol was without effect on secretion. Penicillinase secretion, by actively growing cultures of the constitutive penicillinase-producing mutant 749/C, was inhibited by 75% immediately after addition of chloramphenicol. The secretion of part of the penicillinase released during active growth is probably dependent on synthesis of penicillinase, but part of the secreted penicillinase can be released in the absence of synthesis. Protoplasts were obtained from which periplasmic penicillinase has been removed, and these protoplasts were capable of substantial growth and penicillinase synthesis without lysis. At pH 7.5, there was no net incorporation of penicillinase into the cell membrane; the enzyme released was almost entirely of the exo form and was roughly equivalent to the amount of new enzyme formed. At pH 6.0, there was some incorporation of penicillinase into the plasma membrane, and approximately half of the extracellular penicillinase was in the exo form; the remainder perhaps represented membrane fragments. In the presence of chloramphenicol, a small amount of penicillinase was released at pH 7.5 as the exo form; at pH 6.0, practically none was released. We suggest that, with the removal from protoplasts of the periplasmic penicillinase-containing particles, a restriction on secretion has been lifted.     

Role of the pre-pro-region of neutral protease in secretion in Bacillus subtilis

A thermostable neutral protease (NprT) from Bacillus stearothermophilus CU21 is translated as a precursor containing pre-pro-structure. Deletion and insertion mutations were introduced in the pro-region and the effects of the mutations on production of active NprT were studied. The pro-region was important for the production of active NprT and was effective only when it was combined with the signal sequence (pre-region) of NprT. To examine the role of the pre-region, a penicillinase gene from Bacillus licheniformis (penP) was fused with various nprT secretion vectors. It was also found that the pre-region of NprT can potentially function as a signal sequence but is more functional for the production of NprT when it was combined with a normal pro-region. We discuss how the processing between the pro-structure and the mature portion of the protease might be done autoproteolytically.     

Murein and the Outer Penetration Barrier of Escherichia coli K-12, Proteus mirabilis, and Pseudomonas aeruginosa

A penetration barrier operating outside the periplasmic enzyme penicillinase was studied in an ampicillin-resistant mutant of Escherichia coli K-12. Growth in the presence of lysozyme and sublethal concentrations of ampicillin partially opened the barrier. This could be recorded as an increased penetration of penicillin G, sodium cholate, and rifampin to their respective targets. Brief treatments with tris(hydroxymethyl)aminomethane-ethylenediaminetetraacetic acid and sodium cholate effectively impaired the barrier against penicillin and also caused leakage of penicillinase. Wild-type E. coli K-12, Proteus mirabilis, and Pseudomonas aeruginosa also showed an increased sensitivity to cholate after treatment with penicillins. Electron micrographs showed that lysis by cholate was due to a distortion of the cytoplasmic membrane causing a leakage of protein and RNA from the cells to the medium. Physiological data indicated that the increased sensitivity to cholate induced by growth in the presence of ampicillin or lysozyme was due to effects upon the murein. This was supported by measurement of the incorporation of ³H-diaminopimelic acid. These results indicate that the murein sacculus either is a part of the penetration barrier or is responsible for holding the structure of the outer membrane together.     

Evaluation of Disinfection Techniques for, and Their Effects on, Rectal Thermocouple Catheters

The antibacterial activities of an iodophor (Wescodyne G), a quaternary ammonium compound (Roccal), and an iodine tincture as agents for the cold disinfection of rectal catheters contaminated in vitro were determined. Following thorough cleaning with an alcoholic solution of soft soap, each of the three disinfectants tested showed satisfactory results (100% kill) in 5 min against the enteric test bacteria (Escherichia coli and Salmonella typhosa) as well as a test species of the genus Pseudomonas, among the bacteria most resistant to surface-active agents.

An aqueous solution of Wescodyne G containing 75 ppm available iodine was used both as a wiping solution and for subsequent disinfection of rectal catheters contaminated in vivo. Total bacterial destruction was found to follow a 60-min soak preceded by the wiping procedure.

Rectal catheters subjected to prolonged immersion in each of the test disinfectants were found to be essentially unaffected, retaining their initial calibrations within a permissible tolerance. Neither Roccal nor Wescodyne G solutions were found to measurably attack bare thermocouples. Alcoholic iodine 0.5% did, however, exert a deteriorating effect on bare thermocouples in a short time, as measured by change in resistance characteristics.

The results of this study have led to the recommendation that Wescodyne G containing 75 ppm available iodine be used in standing operating procedures for the initial cleaning and subsequent disinfection of rectal thermocouple catheters.

     

Construction of new excretion vectors: two and three tandemly located promoters are active for extracellular protein production from Escherichia coli

Summary In order to develop a more useful system for extracellular protein production from Escherichia coli, we have constructed the new excretion vectors pEAP82-1, pEAP82-2, and pEAP82-3. These vectors have, respectively, a single, double, and triple penicillinase promoter upstream of a penicillinase structural gene; E. coli HB101 carrying pEAP82-2 or pEAP82-3 produced respectively, about twice or three times as much penicillinase protein than that produced by E. coli carrying pEAP82-1, and 70% to 80% of the protein was excreted into the culture medium. The E. coli carrying pEAP82-3 was cultivated at various temperatures and it was observed that the optimum for extracellular penicillinase production was 30°–37°C. Using this multi-promoter excretion system, the amount of extracellular production of human growth hormone was increased by several fold as observed with penicillinase excretion.     

Immunoelectron microscopic double labeling of alkaline phosphatase and penicillinase with colloidal gold in frozen thin sections of Bacillus licheniformis 749/C.

The subcellular distribution of alkaline phosphatase and penicillinase was determined by double labeling frozen thin sections of Bacillus licheniformis 749/C with colloidal gold-immunoglobulin G (IgG). Antipenicillinase and anti-alkaline phosphatase antibodies were used to prepare complexes with 5- and 15-nm colloidal gold particles, respectively. The character of the labeling of membrane-bound alkaline phosphatase and penicillinase was different: the immunolabels for alkaline phosphatase (15-nm particles) were bound to a few sites at the inner surface of the plasma membrane, and the gold particles formed clusters of various sizes at the binding sites; the immunolabels for penicillinase (5-nm particles), on the other hand, were bound to the plasma membrane in a dispersed and random fashion. In the cytoplasm, immunolabels for both proteins were distributed randomly, and the character of their binding was similar. The labeling was specific: pretreating the frozen thin sections with different concentrations of anti-alkaline phosphatase or penicillinase blocked the binding of the immunolabel prepared with the same antibody. Binding could be fully blocked by pretreatment with 800 micrograms of either antibody per ml.