Crystal structure of rabbit phosphoglucose isomerase complexed with its substrate D-fructose 6-phosphate.

Phosphoglucose isomerase (PGI, EC 5.3.1.9) catalyzes the interconversion of D-glucose 6-phosphate (G6P) and D-fructose 6-phosphate (F6P) and plays important roles in glycolysis and gluconeogenesis. Biochemical characterization of the enzyme has led to a proposed multistep catalytic mechanism. First, the enzyme catalyzes ring opening to yield the open chain form of the substrate. Then isomerization proceeds via proton transfer between C2 and C1 of a cis-enediol(ate) intermediate to yield the open chain form of the product. Catalysis proceeds in both the G6P to F6P and F6P to G6P directions, so both G6P and F6P are substrates. X-ray crystal structure analysis of rabbit and bacterial PGI has previously identified the location of the enzyme active site, and a recent crystal structure of rabbit PGI identified Glu357 as a candidate functional group for transferring the proton. However, it was not clear which active site amino acid residues catalyze the ring opening step. In this paper, we report the X-ray crystal structure of rabbit PGI complexed with the cyclic form of its substrate, D-fructose 6-phosphate, at 2.1 A resolution. The location of the substrate relative to the side chains of His388 suggest that His388 promotes ring opening by protonating the ring oxygen. Glu216 helps to position His388, and a water molecule that is held in position by Lys518 and Thr214 accepts a proton from the hydroxyl group at C2. Comparison to a structure of rabbit PGI with 5PAA bound indicates that ring opening is followed by loss of the protonated water molecule and conformational changes in the substrate and the protein so that a helix containing amino acids 513-520 moves in toward the substrate to form additional hydrogen bonds with the substrate.     

Evidence supporting a cis-enediol-based mechanism for Pyrococcus furiosus phosphoglucose isomerase

The enzymatic aldose ketose isomerisation of glucose and fructose sugars involves the transfer of a hydrogen between their C1 and C2 carbon atoms and, in principle, can proceed through either a direct hydride shift or via a cis-enediol intermediate. Pyrococcus furiosus phosphoglucose isomerase (PfPGI), an archaeal metalloenzyme, which catalyses the interconversion of glucose 6-phosphate and fructose 6-phosphate, has been suggested to operate via a hydride shift mechanism. In contrast, the structurally distinct PGIs of eukaryotic or bacterial origin are thought to catalyse isomerisation via a cis-enediol intermediate. We have shown by NMR that hydrogen exchange between substrate and solvent occurs during the reaction catalysed by PfPGI eliminating the possibility of a hydride-shift-based mechanism. In addition, kinetic measurements on this enzyme have shown that 5-phospho-d-arabinonohydroxamate, a stable analogue of the putative cis-enediol intermediate, is the most potent inhibitor of the enzyme yet discovered. Furthermore, determination and analysis of crystal structures of PfPGI with bound zinc and the substrate F6P, and with a number of competitive inhibitors, and EPR analysis of the coordination of the metal ion within PfPGI, have suggested that a cis-enediol intermediate-based mechanism is used by PfPGI with Glu97 acting as the catalytic base responsible for isomerisation.     

Crystal structure of rabbit phosphoglucose isomerase complexed with 5-phospho-D-arabinonate identifies the role of Glu357 in catalysis

Phosphoglucose isomerase (PGI; E.C. 5.3.1.9) catalyzes the second step in glycolysis, the interconversion of D-glucose-6-phosphate and D-fructose-6-phosphate. We determined the X-ray crystal structure of rabbit PGI complexed with a competitive inhibitor of isomerase activity, 5-phospho-D-arabinonate (5PAA), at 1.9 A resolution. 5PAA is a better mimic of the proposed cis-enediol(ate) intermediate than 6-phospho-D-gluconate, which was used in a previously reported crystal structure of rabbit PGI. The orientation of 5PAA bound in the enzyme active site predicts that active site residue Glu357 is the residue that transfers a proton between C2 and C1 of the proposed cis-enediol(ate) intermediate. Amino acid residues Arg272 and Lys210 are predicted to be involved in stabilizing the negative charge of the intermediate.     

The crystal structure of rabbit phosphoglucose isomerase complexed with D-sorbitol-6-phosphate, an analog of the open chain form of D-glucose-6-phosphate

Phosphoglucose isomerase (PGI) catalyzes the isomerization of D-glucose-6-phosphate (G6P) and D-fructose-6-phosphate (F6P) in glycolysis and gluconeogenesis. Analysis of previously reported X-ray crystal structures of PGI without ligand, with the cyclic form of F6P, or with inhibitors that mimic the cis-enediol intermediate led to proposed mechanisms for the ring opening and isomerization steps in the multistep catalytic mechanism. To help complete our model of the overall mechanism, information is needed about the state of PGI between the ring opening and isomerization steps, in other words, a structure of the enzyme complexed with the open form of a substrate or an analog. Here, we report the crystal structure of rabbit PGI complexed with D-sorbitol-6-phosphate (S6P), an analog of the open chain form of G6P, at 2.0 A resolution. As was seen in the PGI/F6P structure, a helix containing amino acid residues 512-520 is found in the "out" position, which provides sufficient space in the active site for a substrate in its cyclic form and which is probably the location of that helix just after ring opening (or just before ring closure). However, the S6P ligand is in an extended conformation, as was seen previously with ligands that mimic the cis-enediol intermediate. The extended conformation enables the ligand to interact with Glu357, which transfers a proton during the isomerization step. The PGI/S6P structure represents the conformation of the enzyme and substrate between the ring opening (or ring closing) step and the isomerization step and helps to complete the model for PGI's catalytic mechanism.     

At the periphery of the amidohydrolase superfamily: Bh0493 from Bacillus halodurans catalyzes the isomerization of D-galacturonate to D-tagaturonate

The amidohydrolase superfamily is a functionally diverse set of enzymes that catalyzes predominantly hydrolysis reactions involving sugars, nucleic acids, amino acids, and organophosphate esters. One of the most divergent members of this superfamily, uronate isomerase from Escherichia coli, catalyzes the isomerization of d-glucuronate to d-fructuronate and d-galacturonate to d-tagaturonate and is the only uronate isomerase in this organism. A gene encoding a putative uronate isomerase in Bacillus halodurans (Bh0705) was identified based on sequence similarity to uronate isomerases from other organisms. Kinetic evidence indicates that Bh0705 is relatively specific for the isomerization of d-glucuronate to d-fructuronate, confirming this functional assignment. Despite a low sequence identity to all other characterized uronate isomerases, phylogenetic and network-based analysis suggests that a second gene in this organism, Bh0493, is also a uronate isomerase, although it is an outlier in the group, with <20% sequence identity to any other characterized uronate isomerase from another species. The elucidation of the X-ray structure at a resolution of 2.0 A confirms that Bh0493 is a member of the amidohydrolase superfamily with conserved residues common to other members of the uronate isomerase family. Functional characterization of this protein shows that unlike Bh0705, Bh0493 can utilize both d-glucuronate and d-galacturonate as substrates. In B. halodurans, Bh0705 is found in an operon for the metabolism of d-glucuronate, whereas Bh0493 is in an operon for the metabolism of d-galacturonate. These results provide the first identification of a uronate isomerase that operates in a pathway distinct from that for d-glucuronate. While most organisms that contain this pathway have only one gene for a uronate isomerase, sequence analysis and operon context show that five other organisms also appear to have two genes and one organism appears to have three genes for this activity.     

N-Acetyl-D-glucosamine-6-phosphate deacetylase: substrate activation via a single divalent metal ion

NagA is a member of the amidohydrolase superfamily and catalyzes the deacetylation of N-acetyl-d-glucosamine-6-phosphate. The catalytic mechanism of this enzyme was addressed by the characterization of the catalytic properties of metal-substituted derivatives of NagA from Escherichia coli with a variety of substrate analogues. The reaction mechanism is of interest since NagA from bacterial sources is found with either one or two divalent metal ions in the active site. This observation indicates that there has been a divergence in the evolution of NagA and suggests that there are fundamental differences in the mechanistic details for substrate activation and hydrolysis. NagA from E. coli was inactivated by the removal of the zinc bound to the active site and the apoenzyme reactivated upon incubation with 1 equiv of Zn2+, Cd2+, Co2+, Mn2+, Ni2+, or Fe2+. In the proposed catalytic mechanism the reaction is initiated by the polarization of the carbonyl group of the substrate via a direct interaction with the divalent metal ion and His-143. The invariant aspartate (Asp-273) found at the end of beta-strand 8 in all members of the amidohydrolase superfamily abstracts a proton from the metal-bound water molecule (or hydroxide) to promote the hydrolytic attack on the carbonyl group of the substrate. A tetrahedral intermediate is formed and then collapses with cleavage of the C-N bond after proton transfer to the leaving group amine by Asp-273. The lack of a solvent isotope effect by D2O and the absence of any changes to the kinetic constants with increases in solvent viscosity indicate that net product formation is not limited to any significant extent by proton-transfer steps or the release of products. N-Trifluoroacetyl-d-glucosamine-6-phosphate is hydrolyzed by NagA 26-fold faster than the corresponding N-acetyl derivative. This result is consistent with the formation or collapse of the tetrahedral intermediate as the rate limiting step in the catalytic mechanism of NagA.     

Reaction of triosephosphate isomerase with L-glyceraldehyde 3-phosphate and triose 1,2-enediol 3-phosphate

Triosephosphate isomerase catalyzes the isomerization and/or racemization reactions of L-glyceraldehyde 3-phosphate (LGAP), the enantiomer of the physiological substrate. The reaction is inhibited by the active site directed reagent glycidol phosphate. The amount of protonation product formation catalyzed by a fixed enzyme concentration is nearly independent of increasing steady-state concentrations of triose 1,2-enediol 3-phosphate caused by buffer catalysis of LGAP deprotonation. Therefore, enzymatic protonation of the enediol or enediolate, which could account for the observed enzymatic catalysis of LGAP isomerization and/or racemization, is at best a minor reaction. Instead LGAP reacts directly at the enzyme active site. Triosephosphate isomerase catalysis of the protonation of triose 1,2-enediol 3-phosphate was expected because of the strong evidence supporting an enediol reaction intermediate for the overall reaction catalyzed by isomerase. The most reasonable explanation for the failure to observe enzymatic protonation is that in solution the enediol undergoes beta elimination of phosphate (t 1/2 is estimated to be 10(-6) s) faster than it can diffuse to and form a complex with isomerase.     

Catalytic mechanism of xylose (glucose) isomerase from Clostridium thermosulfurogenes. Characterization of the structural gene and function of active site histidine

The gene coding for thermophilic xylose (glucose) isomerase of Clostridium thermosulfurogenes was isolated and its complete nucleotide sequence was determined. The structural gene (xylA) for xylose isomerase encodes a polypeptide of 439 amino acids with an estimated molecular weight of 50,474. The deduced amino acid sequence of thermophilic C. thermosulfurogenes xylose isomerase displayed higher homology with those of thermolabile xylose isomerases from Bacillus subtilis (70%) and Escherichia coli (50%) than with those of thermostable xylose isomerases from Ampullariella (22%), Arthrobacter (23%), and Streptomyces violaceoniger (24%). Several discrete regions were highly conserved throughout the amino acid sequences of all these enzymes. To identify the histidine residue of the active site and to elucidate its function during enzymatic xylose or glucose isomerization, histidine residues at four different positions in the C. thermosulfurogenes enzyme were individually modified by site-directed mutagenesis. Substitution of His101 by phenylalanine completely abolished enzyme activity whereas substitution of other histidine residues by phenylalanine had no effect on enzyme activity. When His101 was changed to glutamine, glutamic acid, asparagine, or aspartic acid, approximately 10-16% of wild-type enzyme activity was retained by the mutant enzymes. The Gln101 mutant enzyme was resistant to diethylpyrocarbonate inhibition which completely inactivated the wild-type enzyme, indicating that His101 is the only essential histidine residue involved directly in enzyme catalysis. The constant Vmax values of the Gln101, Glu101, Asn101, and Asp101 mutant enzymes over the pH range of 5.0-8.5 indicate that protonation of His101 is responsible for the reduced Vmax values of the wild-type enzyme at pH below 6.5. Deuterium isotope effects by D-[2-2H]glucose on the rate of glucose isomerization indicated that hydrogen transfer and not substrate ring opening is the rate-determining step for both the wild-type and Gln101 mutant enzymes. These results suggest that the enzymatic sugar isomerization does not involve a histidine-catalyzed proton transfer mechanism. Rather, essential histidine functions to stabilize the transition state by hydrogen bonding to the C5 hydroxyl group of the substrate and this enables a metal-catalyzed hydride shift from C2 to C1.     

Xylose isomerase in substrate and inhibitor michaelis states: atomic resolution studies of a metal-mediated hydride shift

Xylose isomerase (E.C. 5.3.1.5) catalyzes the interconversion of aldose and ketose sugars and has an absolute requirement for two divalent cations at its active site to drive the hydride transfer rates of sugar isomerization. Evidence suggests some degree of metal movement at the second metal site, although how this movement may affect catalysis is unknown. The 0.95 A resolution structure of the xylitol-inhibited enzyme presented here suggests three alternative positions for the second metal ion, only one of which appears positioned in a catalytically competent manner. To complete the reaction, an active site hydroxyl species appears appropriately positioned for hydrogen transfer, as evidenced by precise bonding distances. Conversely, the 0.98 A resolution structure of the enzyme with glucose bound in the alpha-pyranose state only shows one of the metal ion conformations at the second metal ion binding site, suggesting that the linear form of the sugar is required to promote the second and third metal ion conformations. The two structures suggest a strong degree of conformational flexibility at the active site, which seems required for catalysis and may explain the poor rate of turnover for this enzyme. Further, the pyranose structure implies that His53 may act as the initial acid responsible for ring opening of the sugar to the aldose form, an observation that has been difficult to establish in previous studies. The glucose ring also appears to display significant segmented disorder in a manner suggestive of ring opening, perhaps lending insight into means of enzyme destabilization of the ground state to promote catalysis. On the basis of these results, we propose a modified version of the bridged bimetallic mechanism for hydride transfer in the case of Streptomyces olivochromogenes xylose isomerase.     

Recruitment of a double bond isomerase to serve as a reductive dehalogenase during biodegradation of pentachlorophenol

Tetrachlorohydroquinone dehalogenase catalyzes the replacement of chlorine atoms on tetrachlorohydroquinone and trichlorohydroquinone with hydrogen atoms during the biodegradation of pentachlorophenol by Sphingomonas chlorophenolica. The sequence of the active site region of tetrachlorohydroquinone dehalogenase is very similar to those of the corresponding regions of maleylacetoacetate isomerases, enzymes that catalyze the glutathione-dependent isomerization of a cis double bond in maleylacetoacetate to the trans configuration during the catabolism of phenylalanine and tyrosine. Furthermore, tetrachlorohydroquinone dehalogenase catalyzes the isomerization of maleylacetone (an analogue of maleylacetoacetate) at a rate nearly comparable to that of a bona fide bacterial maleylacetoacetate isomerase. Since maleylacetoacetate isomerase is involved in a common and presumably ancient pathway for catabolism of tyrosine, while tetrachlorohydroquinone dehalogenase catalyzes a more specialized reaction, it is likely that tetrachlorohydroquinone dehalogenase arose from a maleylacetoacetate isomerase. The substrates and overall transformations involved in the dehalogenation and isomerization reactions are strikingly different. This enzyme provides a remarkable example of Nature's ability to recruit an enzyme with a useful structural scaffold and elaborate upon its basic catalytic capabilities to generate a catalyst for a newly needed reaction.     

Structure of the triosephosphate isomerase-phosphoglycolohydroxamate complex: an analogue of the intermediate on the reaction pathway

The glycolytic enzyme triosephosphate isomerase (TIM) catalyzes the interconversion of the three-carbon sugars dihydroxyacetone phosphate (DHAP) and D-glyceraldehyde 3-phosphate (GAP) at a rate limited by the diffusion of substrate to the enzyme. We have solved the three-dimensional structure of TIM complexed with a reactive intermediate analogue, phosphoglycolohydroxamate (PGH), at 1.9-A resolution and have refined the structure to an R-factor of 18%. Analysis of the refined structure reveals the geometry of the active-site residues and the interactions they make with the inhibitor and, by analogy, the substrates. The structure is consistent with an acid-base mechanism in which the carboxylate of Glu-165 abstracts a proton from carbon while His-95 donates a proton to oxygen to form an enediol (or enediolate) intermediate. The conformation of the bound substrate stereoelectronically favors proton transfer from substrate carbon to the syn orbital of Glu-165. The crystal structure suggests that His-95 is neutral rather than cationic in the ground state and therefore would have to function as an imidazole acid instead of the usual imidazolium. Lys-12 is oriented so as to polarize the substrate oxygens by hydrogen bonding and/or electrostatic interaction, providing stabilization for the charged transition state. Asn-10 may play a similar role.     

The crystal structure of delta(3)-delta(2)-enoyl-CoA isomerase

The active-site geometry of the first crystal structure of a Delta(3)-Delta(2)-enoyl-coenzyme A (CoA) isomerase (the peroxisomal enzyme from the yeast Saccharomyces cerevisiae) shows that only one catalytic base, Glu158, is involved in shuttling the proton from the C2 carbon atom of the substrate, Delta(3)-enoyl-CoA, to the C4 atom of the product, Delta(2)-enoyl-CoA. Site-directed mutagenesis has been performed to confirm that this glutamate residue is essential for catalysis. This Delta(3)-Delta(2)-enoyl-CoA isomerase is a hexameric enzyme, consisting of six identical subunits. It belongs to the hydratase/isomerase superfamily of enzymes which catalyze a wide range of CoA-dependent reactions. The members of the hydratase/ isomerase superfamily have only a low level of sequence identity. Comparison of the crystal structure of the Delta(3)-Delta(2)-enoyl-CoA isomerase with the other structures of this superfamily shows only one region of large structural variability, which is in the second turn of the spiral fold and which is involved in defining the shape of the binding pocket.     

cis-beta-acetylacrylate is a substrate for maleylacetoacetate cis-trans isomerase. Mechanistic implications

Maleylacetoacetate cis-trans isomerase together with coenzyme glutathione catalyzes cis-trans isomerization of cis-beta-acetylacrylate strongly suggesting that the isomerase directly catalyzes isomerization of the diketo forms in addition to the ketoenol forms of maleylacetone and maleylacetoacetate. The isomerase exhibits wider substrate acceptance than previously thought.     

Metabolism of Styrene Oxide and 2-Phenylethanol in the Styrene-Degrading Xanthobacter Strain 124X

Styrene oxide and 2-phenylethanol metabolism in the styrene-degrading Xanthobacter sp. strain 124X was shown to proceed via phenylacetaldehyde and phenylacetic acid. In cell extracts 2-phenylethanol was oxidized by a phenazine methosulfate-dependent enzyme, probably a pyrroloquinoline quinone enzyme. Xanthobacter sp. strain 124X also contains a novel enzymatic activity designated as styrene oxide isomerase. Styrene oxide isomerase catalyzes the isomerization of styrene oxide to phenylacetaldehyde. The enzyme was partially purified and shown to have a very high substrate specificity. Of the epoxides tested, styrene oxide was the only substrate transformed. The initial step in styrene metabolism in Xanthobacter sp. strain 124X is oxygen dependent and probably involves oxidation of the aromatic nucleus.     

Proton diffusion in the active site of triosephosphate isomerase

The current model for hydrogen flow in the aldose-ketose isomerases is probably incorrect. Enzymes of this class are characterized by both hydrogen transfer and proton exchange in the interconversion of substrate and product. The transfer is believed to be due to the action of a unique basic residue in the active site. Exchange is presumed to occur by dissociation of the abstracted proton and reassociation from the medium prior to its transfer to the intermediate enediol on the way to product. Dissociation of a necessary proton from the intermediate state imposes limits on the overall catalytic rate depending on the pKa of the protonated base and the pH of the medium. A case in point is triose-P isomerase (TIM), where kcat is approximately 10(4) s-1. T-Labeled substrate is found to lose approximately 95% of its T to the medium when totally converted to product. Although the active site base is believed to be a glutamate of pKa = 3.9, the pH dependence of maximum velocity is known to be flat up to pH 10. The loss of hydrogen required to form product as indicated by isotope exchange must be restored completely at this high pH, requiring a base of very high pKa, or there must be some other explanation for the loss of isotope. The present study demonstrates the existence of a single proton on human and rabbit TIM and three protons on yeast TIM that rapidly exchange with the abstracted proton at the E.enediol state internal exchange. Exchange with the medium external exchange occurs from the enzyme after substrate or product has dissociated.(ABSTRACT TRUNCATED AT 250 WORDS)     

A metabolic bypass of the triosephosphate isomerase reaction

Triosephosphate isomerase (TIM) catalyzes the interconversion of d-glyceraldehyde 3-phosphate and dihydroxyacetone phosphate, an essential step in glycolytic and gluconeogenic metabolism. To uncover promiscuous isomerases embedded within the Escherichia coli genome, we searched for genes capable of restoring growth of a TIM-deficient bacterium under gluconeogenic conditions. Rather than discovering an isomerase, we selected yghZ, a gene encoding a member of the aldo-keto reductase superfamily. Here we show that YghZ catalyzes the stereospecific, NADPH-dependent reduction of l-glyceraldehyde 3-phosphate, the enantiomer of the TIM substrate. This transformation provides an alternate pathway to the formation of dihydroxyacetone phosphate.     

Substrate specificity of a galactose 6-phosphate isomerase from Lactococcus lactis that produces d-allose from d-psicose

We purified recombinant galactose 6-phosphate isomerase (LacAB) from Lactococcus lactis using HiTrap Q HP and Phenyl-Sepharose columns. The purified LacAB had a final specific activity of 1.79units/mg to produce d-allose. The molecular mass of native galactose 6-phosphate isomerase was estimated at 135.5kDa using Sephacryl S-300 gel filtration, and the enzyme exists as a hetero-octamer of LacA and LacB subunits. The activity of galactose 6-phosphate isomerase was maximal at pH 7.0 and 30 degrees C, and enzyme activity was independent of metal ions. When 100g/L of d-psicose was used as the substrate, 25g/L of d-allose and 13g/L of d-altrose were simultaneously produced at pH 7.0 and 30 degrees C after 12h of incubation. The enzyme had broad specificity for various aldoses and ketoses. The interconversion of sugars with the same configuration except at the C2 position was driven by using a large amount of enzyme in extended reactions. The interconversion occurred via two isomerization reactions, i.e., the interconversion of d-allose<-->d-psicose<-->d-altrose, and d-allose to d-psicose reaction was faster than d-altrose to d-psicose reaction.     

Structural evidence for a hydride transfer mechanism of catalysis in phosphoglucose isomerase from Pyrococcus furiosus

In the Euryarchaeota species Pyrococcus furiosus and Thermococcus litoralis, phosphoglucose isomerase (PGI) activity is catalyzed by an enzyme unrelated to the well known family of PGI enzymes found in prokaryotes, eukaryotes, and some archaea. We have determined the crystal structure of PGI from Pyrococcus furiosus in native form and in complex with two active site ligands, 5-phosphoarabinonate and gluconate 6-phosphate. In these structures, the metal ion, which in vivo is presumed to be Fe2+, is located in the core of the cupin fold and is immediately adjacent to the C1-C2 region of the ligands, suggesting that Fe2+ is involved in catalysis rather than serving a structural role. The active site contains a glutamate residue that contacts the substrate, but, because it is also coordinated to the metal ion, it is highly unlikely to mediate proton transfer in a cis-enediol mechanism. Consequently, we propose a hydride shift mechanism of catalysis. In this mechanism, Fe2+ is responsible for proton transfer between O1 and O2, and the hydride shift between C1 and C2 is favored by a markedly hydrophobic environment in the active site. The absence of any obvious enzymatic machinery for catalyzing ring opening of the sugar substrates suggests that pyrococcal PGI has a preference for straight chain substrates and that metabolism in extreme thermophiles may use sugars in both ring and straight chain forms.     

Triosephosphate isomerase: removal of a putatively electrophilic histidine residue results in a subtle change in catalytic mechanism

An important active-site residue in the glycolytic enzyme triosephosphate isomerase is His-95, which appears to act as an electrophilic component in catalyzing the enolization of the substrates. With the techniques of site-directed mutagenesis, His-95 has been replaced by Gln in the isomerase from Saccharomyces cerevisiae. The mutant isomerase has been expressed in Escherichia coli strain DF502 and purified to homogeneity. The specific catalytic activity of the mutant enzyme is less than that of wild type by a factor of nearly 400. The mutant enzyme can be resolved from the wild-type isomerase on nondenaturing isoelectric focusing gels, and an isomerase activity stain shows that the observed catalytic activity indeed derives from the mutant protein. The inhibition constants for arsenate and for glycerol phosphate with the mutant enzyme are similar to those with the wild-type isomerase, but the substrate analogues 2-phosphoglycolate and phosphoglycolohydroxamate bind 8- and 35-fold, respectively, more weakly to the mutant isomerase. The mutant enzyme shows the same stereospecificity of proton transfer as the wild type. Tritium exchange experiments similar to those used to define the free energy profile for the wild-type yeast isomerase, together with a new method of analysis involving 14C and 3H doubly labeled substrates, have been used to investigate the energetics of the mutant enzyme catalyzed reaction. When the enzymatic reaction is conducted in tritiated solvent, the mutant isomerase does not catalyze any appreciable exchange between protons of the remaining substrate and those of the solvent either in the forward reaction direction (using dihydroxyacetone phosphate as substrate) or in the reverse direction (using glyceraldehyde phosphate as substrate). However, the specific radioactivity of the product glyceraldehyde phosphate formed in the forward reaction is 31% that of the solvent, while that of the product dihydroxyacetone phosphate formed in the reverse reaction is 24% that of the solvent. The deuterium kinetic isotope effects observed with the mutant isomerase using [1(R)-2H]dihydroxyacetone phosphate and [2-2H]glyceraldehyde 3-phosphate are 2.15 +/- 0.04 and 2.4 +/- 0.1, respectively. These results lead to the conclusion that substitution of Gln for His-95 so impairs the ability of the enzyme to stabilize the reaction intermediate that there is a change in the pathways of proton transfer mediated by the mutant enzyme. The data allow us more closely to define the role of His-95 in the reaction catalyzed by the wild-type enzyme, while forcing us to be alert to subtle changes in mechanistic pathways when mutant enzymes are generated.     

Structure of diethyl phosphate bound to the binuclear metal center of phosphotriesterase

The bacterial phosphotriesterase (PTE) from Pseudomonas diminuta catalyzes the hydrolysis of organophosphate esters at rates close to the diffusion limit. X-ray diffraction studies have shown that a binuclear metal center is positioned in the active site of PTE and that this complex is responsible for the activation of the nucleophilic water from solvent. In this paper, the three-dimensional structure of PTE was determined in the presence of the hydrolysis product, diethyl phosphate (DEP), and a product analogue, cacodylate. In the structure of the PTE-diethyl phosphate complex, the DEP product is found symmetrically bridging the two divalent cations. The DEP displaces the hydroxide from solvent that normally bridges the two divalent cations in structures determined in the presence or absence of substrate analogues. One of the phosphoryl oxygen atoms in the PTE-DEP complex is 2.0 A from the alpha-metal ion, while the other oxygen is 2.2 A from the beta-metal ion. The two metal ions are separated by a distance of 4.0 A. A similar structure is observed in the presence of cacodylate. Analogous complexes have previously been observed for the product complexes of isoaspartyl dipeptidase, d-aminoacylase, and dihydroorotase from the amidohydrolase superfamily of enzymes. The experimentally determined structure of the PTE-diethyl phosphate product complex is inconsistent with a recent proposal based upon quantum mechanical/molecular mechanical simulations which postulated the formation of an asymmetrical product complex bound exclusively to the beta-metal ion with a metal-metal separation of 5.3 A. This structure is also inconsistent with a chemical mechanism for substrate hydrolysis that utilizes the bridging hydroxide as a base to abstract a proton from a water molecule loosely associated with the alpha-metal ion. Density functional theory (DFT) calculations support a reaction mechanism that utilizes the bridging hydroxide as the direct nucleophile in the hydrolysis of organophosphate esters by PTE.