Conserved amino acid motifs from the novel Piv/MooV family of transposases and site-specific recombinases are required for catalysis of DNA inversion by Piv

Piv, a site-specific invertase from Moraxella lacunata, exhibits amino acid homology with the transposases of the IS110/IS492 family of insertion elements. The functions of conserved amino acid motifs that define this novel family of both transposases and site-specific recombinases (Piv/MooV family) were examined by mutagenesis of fully conserved amino acids within each motif in Piv. All Piv mutants altered in conserved residues were defective for in vivo inversion of the M. lacunata invertible DNA segment, but competent for in vivo binding to Piv DNA recognition sequences. Although the primary amino acid sequences of the Piv/MooV recombinases do not contain a conserved DDE motif, which defines the retroviral integrase/transposase (IN/Tnps) family, the predicted secondary structural elements of Piv align well with those of the IN/Tnps for which crystal structures have been determined. Molecular modelling of Piv based on these alignments predicts that E59, conserved as either E or D in the Piv/MooV family, forms a catalytic pocket with the conserved D9 and D101 residues. Analysis of Piv E59G confirms a role for E59 in catalysis of inversion. These results suggest that Piv and the related IS110/IS492 transposases mediate DNA recombination by a common mechanism involving a catalytic DED or DDD motif.     

Active site sharing and subterminal hairpin recognition in a new class of DNA transposases

Many bacteria harbor simple transposable elements termed insertion sequences (IS). In Helicobacter pylori, the chimeric IS605 family elements are particularly interesting due to their proximity to genes encoding gastric epithelial invasion factors. Protein sequences of IS605 transposases do not bear the hallmarks of other well-characterized transposases. We have solved the crystal structure of full-length transposase (TnpA) of a representative member, ISHp608. Structurally, TnpA does not resemble any characterized transposase; rather, it is related to rolling circle replication (RCR) proteins. Consistent with RCR, Mg2+ and a conserved tyrosine, Tyr127, are essential for DNA nicking and the formation of a covalent intermediate between TnpA and DNA. TnpA is dimeric, contains two shared active sites, and binds two DNA stem loops representing the conserved inverted repeats near each end of ISHp608. The cocrystal structure with stem-loop DNA illustrates how this family of transposases specifically recognizes and pairs ends, necessary steps during transposition.     

Relationships between transposable elements based upon the integrase-transposase domains: Is there a common ancestor?

The integrase domain of RNA-mediated elements (class I) and the transposase domain of DNA-mediated transposable elements (class II) were compared. A number of elements contain the DDE signature, which plays an important role in their integration. The possible relationships between mariner-Tc1 and IS elements, retrotransposons, and retroviruses were analyzed from an alignment of this region. The mariner-Tc1 superfamily, and LTR retrotransposons and retroviruses were found to be monophyletic groups. However, the IS elements of bacteria were found in several groups. These results were used to propose an evolutionary history that suggests a common ancestor for some integrases and transposases. Received: 3 July 1995 / Accepted: 9 October 1995     

Identification of IS 1206, a Corynebacterium glutamicum IS3-related insertion sequence and phylogenetic analysis

Integration of plasmid pCGL320 into a Corynebacterium glutamicum ATCC21086 derivative led to tandem amplification of the inserted plasmid (Labarre et a/., 1993). One amplification event was associated with integration of an insertion sequence that we have named IS 1206. Hybridizing sequences were only found in C. glutamicum strains and at various copy numbers. IS1206 is 1290bp long, carries 32 bp imperfect inverted repeats and generates a 3bp duplication of the target DNA upon insertion. IS1206 presents the features characteristic of the IS3 family and part of the DNA sequence centering on the putative transposase region (orfB) is similar to those of IS3 and some other related elements. Phylogenetic analysis of orfB deduced protein sequences from IS 1206 and IS3-related elements contradicts the phylogeny of the species, suggesting that evolution of these elements might be complex. Horizontal transfer could be invoked but other alternatives like ancestral polymorphism or/and different rates of evolution could also be involved.     

Identification and characterization of IS 1138, a transposable element from Mycoplasma pulmonis that belongs to the IS3 family

Insertion sequence (IS) elements are mobile genetic elements found in prokaryotes. We have identified a repetitive element from Mycoplasma pulmonis, a murine pathogen, that is similar to eubacterial IS elements. By subcloning a single strain of M. pulmonis, we isolated a variant clone in which the IS element had undergone an apparent transposition event. The nucleotide sequences of the element, designated IS 1138, and the target site into which it inserted were determined. IS1138 consists of 1288bp with 18bp perfect terminal inverted repeats. Sequence analysis of the target site before and after insertion of IS1138 identified a 3bp duplication of target DNA flanking the element. The predicted amino acids encoded by the major open reading frame of IS 1138 share significant similarity with the transposases of the IS3 family. Southern hybridization analysis indicates that repetitive sequences similar to IS 1138 are present in most, if not all, strains of M. pulmonis, but Is1138–like sequences were not detected in other mycoplasmal species.     

IS231A insertion specificity: consensus sequence and DNA bending at the target site

In its natural host, Bacillus thuringiensis, the insertion sequence IS231A is preferentially inserted into the terminal inverted repeats of the transposon Tn4430. Using a novel transposition assay, we demonstrate that the Tn4430 ends behave as insertion hot spots for IS231A in Escherichia coli. Sequence analysis reveals that IS231A insertion sites match the 5′-GGG(N)₅CCC-3′consensus. However, this consensus is not the only determinant of IS231A insertion specificity. Although both Tn4430 ends have identical sequences, one is strongly preferred to the other and the orientation of insertion into this end is not random. We demonstrate that this preference is determined by the flanking regions of the site. These regions display a conserved periodic organization of their sequence which, by conferring anisotropic flexibility, would induce the DNA to bend in a roughly ‘S’ -shaped structure centred on the target consensus. DNA conformation analysis by polyacrylamide gel electrophoresis indeed shows that the preferred target site of IS231A is flanked by DNA segments curved in opposite directions. We present a model in which DNA bendability and curvature would contribute to the positioning of IS231A transposase on the target DNA.     

Presence of a characteristic D-D-E motif in IS1 transposase

Transposases encoded by various transposable DNA elements and retroviral integrases belong to a family of proteins with three conserved acidic amino acids, D, D, and E, constituting the D-D-E motif that represents the active center of the proteins. IS1, one of the smallest transposable elements in bacteria, encodes a transposase which has been thought not to belong to the family of proteins with the D-D-E motif. In this study, we found several IS1 family elements that were widely distributed not only in eubacteria but also in archaebacteria. The alignment of the transposase amino acid sequences from these IS1 family elements showed that out of 14 acidic amino acids present in IS1 transposase, three (D, D, and E) were conserved in corresponding positions in the transposases encoded by all the elements. Comparison of the IS1 transposase with other proteins with the D-D-E motif revealed that the polypeptide segments surrounding each of the three acidic amino acids were similar. Furthermore, the deduced secondary structures of the transposases encoded by IS1 family elements were similar to one another and to those of proteins with the D-D-E motif. These results strongly suggest that IS1 transposase has the D-D-E motif and thus belongs to the family of proteins with the D-D-E motif. In fact, mutant IS1 transposases with an amino acid substitution for each of the three acidic amino acids possibly constituting the D-D-E motif were not able to promote transposition of IS1, supporting this hypothesis. The D-D-E motif identified in IS1 transposase differs from those in the other proteins in that the polypeptide segment between the second D and third E in IS1 transposase is the shortest, 24 amino acids in length. Because of this difference, the presence of the D-D-E motif in IS1 transposase has not been discovered for some time.     

Putative Transposases Conserved in Exiguobacterium Isolates from Ancient Siberian Permafrost and from Contemporary Surface Habitats

Gram-positive bacteria of the genus Exiguobacterium have been repeatedly isolated from Siberian permafrost ranging in age from 20,000 to 2 to 3 million years and have been sporadically recovered from markedly diverse habitats, including microbial mats in Lake Fryxell (Antarctic), surface water, and food-processing environments. However, there is currently no information on genomic diversity of this microorganism or on the physiological strategies that have allowed its survival under prolonged freezing in the permafrost. Analysis of the genome sequence of the most ancient available Exiguobacterium isolate (Exiguobacterium sp. strain 255-15, from 2 to 3 million-year-old Siberian permafrost) revealed numerous putative transposase sequences, primarily of the IS200/IS605, IS30, and IS3 families, with four transposase families identified. Several of the transposase genes appeared to be part of insertion sequences. Southern blots with different transposase probes yielded high-resolution genomic fingerprints which differentiated the different permafrost isolates from each other and from the Exiguobacterium spp. type strains which have been derived from diverse surface habitats. Each of the Exiguobacterium sp. strain 255-15 transposases that were used as probes had highly conserved homologs in the genome of other Exiguobacterium strains, both from permafrost and from modern sites. These findings suggest that, prior to their entrapment in permafrost, Exiguobacterium isolates had acquired transposases and that conserved transposases are present in Exiguobacterium spp., which now can be isolated from various modern surface habitats.     

Cloning and Sequence Analysis of a Novel Insertion Element from Plasmids Harbored by the Carbofuran-Degrading Bacterium,Sphingomonassp. CFO6

Sphingomonassp. CFO6 (a member of the alpha group ofProteobacteria) was isolated from a Washington soil by enrichment on the insecticide carbofuran as a sole source of carbon and energy. This strain has been shown to harbor five plasmids, at least some of which are required for catabolism of carbofuran. Rearrangements, deletions, and loss of individual plasmids resulting in the loss of the carbofuran-degrading phenotype were observed following treatment with heat or introduction of Tn5.Several putative insertion sequence elements of different sizes were cloned from these plasmids by trapping in pUCD800, a positive selection vector for isolation of transposable elements. Three of the most common putative IS elements (designated IS1412,IS1487,and IS1488) in the clone library were of different sizes and cross-hybridize with each other. An element hybridizing with IS1412,IS1487,and IS1488was mobilized during growth of CFO6 at 42°C and inserted into one of CFO6's plasmids (pCFO4), corresponding to a deletion in the plasmid and a loss of catabolic function. IS1412was completely sequenced and its sequence analyzed. IS1412is 1656 bp in length and possesses terminal partially matched inverted repeats of unequal length (17 and 18 bp). In addition, IS1412contains an open reading frame which encodes a putative transposase with significant homology to the putative transposases of IS1380fromAcetobacter pasteurianus,HRS1 fromBradyrhizobium japonicum,and IS1247fromXanthobacter autotrophicus.These related IS elements form part of a family of common IS elements distributed among members of the alpha group of theProteobacteria.     

Characterization of IS1474, an insertion sequence of the IS21 family isolated from Pseudomonas alcaligenes NCIB 9867

A new insertion sequence (IS) designated IS1474 was isolated from Pseudomonas alcaligenes NCIB 9867 (P25X). IS1474 is a 2632 bp element which showed a characteristic IS structure with 12 bp inverted repeats (IRs) flanking a 2608 bp central region. IS1474 contained four open reading frames (ORF1–ORF4), two in each orientation. Similarities were detected between ORF1 and ORF2 and the putative transposases of the IS21 family. Sequences upstream from IS1474 were found to display up to 89% homology with IS53 from Pseudomonas syringae suggesting that IS1474 had inserted into another related IS element designated IS1475. An open reading frame, ORF5, located at the junction of IS1474 and IS1475, showed similarities with the IstB protein of IS21 and could possibly be the transposase subunit of IS1475. Transposition assays showed that IS1474 transposed at a relatively low frequency leading to cointegration with target plasmids. Hybridization studies showed that IS1474 is present in at least 13 copies in the chromosome of P25X and one copy on its endogenous plasmid.     

Insertion specificity and trans -activation of IS801

The transposable element IS801, isolated from plasmid pMMC7105 of Pseudomonas syringae pv. phaseolicola, transposes in Escherichia coli to plasmid targets, expressing a relatively relaxed target specificity. The target sequences are tetramers with homology with the left terminus (GAAC) of the transposing unit, the alternative targets being GAAC, GGAC, CAAG, and CGAC. In the areas flanking IS801 in 13 different locations, no similarities other than the target tetramer were observed. The transposase is physically and functionally separable from the transposing unit since transposition of constructs carrying marker genes occurs with the transposase expressed in trans. The IS801 transposase shows amino acid sequence homology to the transposases of the E. coli elements IS91 and IS1294. These tranposases contain conserved amino acid motifs found in the replicases of certain plasmids that replicate as rolling circles. Received: 18 March 1998 / Accepted: 15 August 1998     

IS<Emphasis Type="Italic">Rm31</Emphasis>, a new insertion sequence of the IS<Emphasis Type="Italic">66</Emphasis> family in<Emphasis Type="Italic"> Sinorhizobium meliloti</Emphasis>

Sinorhizobium meliloti natural populations show a high level of genetic polymorphism possibly due to the presence of mobile genetic elements such as insertion sequences (IS), transposons, and bacterial mobile introns. The analysis of the DNA sequence polymorphism of the nod region of S. meliloti pSymA megaplasmid in an Italian isolate led to the discovery of a new insertion sequence, ISRm31. ISRm31 is 2,803 bp long and has 22-bp-long terminal inverted repeat sequences, 8-bp direct repeat sequences generated by transposition, and three ORFs (A, B, C) coding for proteins of 124, 115, and 541 amino acids, respectively. ORF A and ORF C are significantly similar to members of the transposase family. Amino acid and nucleotide sequences indicate that ISRm31 is a member of the IS66 family. ISRm31 sequences were found in 30.5% of the Italian strains analyzed, and were also present in several collection strains of the Rhizobiaceae family, including S. meliloti strain 1021. Alignment of targets sites in the genome of strains carrying ISRm31 suggested that ISRm31 inserts randomly into S. meliloti genomes. Moreover, analysis of ISRm31 insertion sites revealed DNA sequences not present in the recently sequenced S. meliloti strain 1021 genome. In fact, ISRm31 was in some cases linked to DNA fragments homologous to sequences found in other rhizobia species.     

The three-dimensional structure of a Tn5 transposase-related protein determined to 2.9-A resolution

Transposon Tn5 employs a unique means of self-regulation by expressing a truncated version of the transposase enzyme that acts as an inhibitor. The inhibitor protein differs from the full-length transposase only by the absence of the first 55 N-terminal amino acid residues. It contains the catalytic active site of transposase and a C-terminal domain involved in protein-protein interactions. The three-dimensional structure of Tn5 inhibitor determined to 2.9-A resolution is reported here. A portion of the protein fold of the catalytic core domain is similar to the folds of human immunodeficiency virus-1 integrase, avian sarcoma virus integrase, and bacteriophage Mu transposase. The Tn5 inhibitor contains an insertion that extends the beta-sheet of the catalytic core from 5 to 9 strands. All three of the conserved residues that make up the "DDE" motif of the active site are visible in the structure. An arginine residue that is strictly conserved among the IS4 family of bacterial transposases is present at the center of the active site, suggesting a catalytic motif of "DDRE." A novel C-terminal domain forms a dimer interface across a crystallographic 2-fold axis. Although this dimer represents the structure of the inhibited complex, it provides insight into the structure of the synaptic complex.     

Diversity in the serine recombinases

Most site-specific recombinases fall into one of two families, based on evolutionary and mechanistic relatedness. These are the tyrosine recombinases or lambda integrase family and the serine recombinases or resolvase/invertase family. The tyrosine recombinases are structurally diverse and functionally versatile and include integrases, resolvases, invertases and transposases. Recent studies have revealed that the serine recombinase family is equally versatile and members have a variety of structural forms. The archetypal resolvase/invertases are highly regulated, only affect resolution or inversion and they have an N-terminal catalytic domain and a C-terminal DNA binding domain. Phage-encoded serine recombinases (e.g. phiC31 integrase) cause integration and excision with strictly controlled directionality, and have an N-terminal catalytic domain but much longer C-terminal domains compared with the resolvase/invertases. This high molecular weight group also contains transposases (e.g. TnpX from Tn4451). Other transposases, which belong to a third structurally different group, are similar in size to the resolvase/invertases but have the DNA binding domain N-terminal to the catalytic domain (e.g. IS607 transposase). These three structural groups represented by the resolvase/invertases, the large serine recombinases and relatives of IS607 transposase correlate with three major groupings seen in a phylogeny of the catalytic domains. These observations indicate that the serine recombinases are modular and that fusion of the catalytic domain to unrelated sequences has generated structural and functional diversity.     

Characterization and distribution of two insertion sequences,IS1191 and iso-IS981, in Streptococcus thermophilus: does intergeneric transfer of insertion sequences occur in lactic acid bacteria co-cultures?

A chromosomal repeated sequence from Streptococcus thermophilus was identified as a new insertion sequence (IS), IS1191. This is the first IS element characterized in this species. This 1313 bp element has 28 bp imperfect terminal inverted repeats and is flanked by short direct repeats of 8bp. The single large open reading frame of IS1191 encodes a 391-amino-acid protein which displays homologies with transposases encoded by IS1201 from Lactobacillus helveticus (44.5% amino-acid sequence identity) and by the other ISs of the IS256 family. One of the copies of IS 1191 is inserted into a truncated iso-IS981 element. The nucleotide sequences of two truncated iso-IS981 s from S. thermophilus and the sequence of IS981 element from Lactococcus lactis share more than 99% identity. The distribution of these insertion sequences in L. lactis and S. thermophilus strains suggests that intergeneric transfers occur during co-cultures used in the manufacture of cheese.     

A New Insertion Variant, IS231I, Isolated from a Mosquito-Specific Strain of Bacillus thuringiensis

A new insertion variant belonging to the family IS231, designated IS231I, was isolated from a mosquito larvicidal strain of the Bacillus thuringiensis serovar sotto (H4ab). IS231I was 1653 bp long and delimited by two 20 bp inverted repeats with one mismatch, flanked by two perfect 11 bp direct repeats. The element contained a single open reading frame (ORF) encoding 478 amino acids and five conserved domains: N1, N2, N3, C1, and C2. The 5′ noncoding region upstream of the ORF, presumed to form a stable stem-and-loop structure, was highly conserved in IS231I. The secondary structure conformation had a deduced free energy (ΔG = 25°C) of −17.2 kcal/mol. Comparison of the IS231I amino acid sequence with those of the 10 existing IS variants revealed that the new variant shares 89% identity with IS231A and IS231B, 65–66% with IS231M and IS231N, and 38% with IS231W.     

ISDra2 transposition in Deinococcus radiodurans is downregulated by TnpB

Transposable elements belonging to the recently identified IS200/IS605 family radically differ from classical insertion sequences in their transposition mechanism by strictly requiring single‐stranded DNA substrates. This IS family includes elements encoding only the transposase (TnpA), and others, like ISDra2 from Deinococcus radiodurans, which contain a second gene, tnpB, dispensable for transposition and of unknown function to date. Here, we show that TnpB has an inhibitory effect on the excision and insertion steps of ISDra2 transposition. This inhibitory action of TnpB was maintained when ISDra2 transposition was induced by γ‐irradiation of the host cells and required the integrity of its putative zinc finger motif. We also demonstrate the negative role of TnpB when ISDra2 transposition was monitored in a heterologous Escherichia coli host, indicating that TnpB‐mediated inhibition does not involve Deinococcus‐specific factors. TnpB therefore appears to play a regulatory role in ISDra2 transposition.     

IS231 and otherBacillus thuringiensis transposable elements: A review

Bacillus thuringiensis is an entomopathogenic bacterium whose toxicity is due to the presence in the sporangia of -endotoxin crystals active against agricultural pests and vectors of human and animal diseases. Most of the genes coding for these toxin proteins are plasmid-borne and are generally structurally associated with insertion sequences (IS231, IS232, IS240, ISBT1 and ISBT2) and transposons (Tn4430 and Tn5401). Several of these mobile elements have been shown to be active and are believed to participate in the crystal gene mobility, thereby contributing to the variation of bacterial toxicity. Structural analysis of the iso-IS231 elements indicates that they are related to IS1151 fromClostridium perfringens and distantly related to IS4 and IS186 fromEscherichia coli. Like the other IS4 family members, they contain a conserved transposase-integrase motif found in other IS families and retroviruses. Moreover, functional data gathered from IS231 A inEscherichia coli indicate a non-replicative mode of transposition, with a marked preference for specific targets. Similar results were also obtained inBacillus subtilis andB. thuringiensis, and a working model for DNA-protein interactions at the target site is proposed.