Assessment of cell-substrate adhesion by a centrifugal method

Summary A centrifugal method has been evaluated for measuring the strength of Vero Green Monkey kidney cell adhesion to growth surfaces. The centrifugal force necessary to remove cells gave a quantitative measure of cell adhesion and hence the quality of the growth surface. After being subjected to high gravity forces, both the remaining attached cells and the detached cells were viable, indicating the detachment process did not simply rupture the cell. Electron microscope examination of growth surfaces after cell detachment suggested that remnants related to filopodia remained.     

UNDERSTANDING INTERCELLULAR INTERACTIONS AND CELL ADHESION: LESSONS FROM STUDIES ON PROTEIN—METAL INTERACTIONS

To understand cell—cell interactions and the interactions of cells to non-biological materials, studies on binding forces between cellular proteins and between proteins and non-biological material such as metal surfaces are essential. The adsorption of proteins to solid—water interfaces is a multifactorial and a multistep process. First steps are determined by long-range interactions where surface properties such as hydrophobicity, distribution of charged groups, ion concentrations and pH play important roles. In later steps structural rearrangements in the protein molecule and dehydration effects become more important making the adsorption process often irreversible. In the following we demonstrate that protein A and tubulin have a specific type of interaction to metal surfaces probably as an intermediate step in the adsorption process. The proteins were attached to the tip of a microfabricated cantilever in such a way that only one molecule interacts with the surface. By recording force—distance curves with an atomic force microscope the adhesion forces of single molecules binding to gold, titanium and indium—tinoxid surfaces were measured.     

Adhesion of cells to polystyrene surfaces

The surface treatment of polystyrene, which is required to make polystyrene suitable for cell adhesion and spreading, was investigated. Examination of surfaces treated with sulfuric acid or various oxidizing agents using (a) x-ray photoelectron and attenuated total reflection spectroscopy and (b) measurement of surface carboxyl-, hydroxyl-, and sulfur-containing groups by various radiochemical methods showed that sulfuric acid produces an insignificant number of sulfonic acid groups on polystyrene. This technique together with various oxidation techniques that render surfaces suitable for cell culture generated high surface densities of hydroxyl groups. The importance of surface hydroxyl groups for the adhesion of baby hamster kidney cells or leukocytes was demonstrated by the inhibition of adhesion when these groups were blocked: blocking of carboxyl groups did not inhibit adhesion and may raise the adhesion of a surface. These results applied to cell adhesion in the presence and absence of serum. The relative unimportance of fibronectin for the adhesion and spreading of baby hamster kidney cells to hydroxyl-rich surfaces was concluded when cells spread on such surfaces after protein synthesis was inhibited with cycloheximide, fibronectin was removed by trypsinization, and trypsin activity was stopped with leupeptin.     

Mechanics of cellular adhesion to artificial artery templates

We are using polymer templates to grow artificial artery grafts in vivo for the replacement of diseased blood vessels. We have previously shown that adhesion of macrophages to the template starts the graft formation. We present a study of the mechanics of macrophage adhesion to these templates on a single cell and single bond level with optical tweezers. For whole cells, in vitro cell adhesion densities decreased significantly from polymer templates polyethylene to silicone to Tygon (167, 135, and 65 cells/mm(2)). These cell densities were correlated with the graft formation success rate (50%, 25%, and 0%). Single-bond rupture forces at a loading rate of 450 pN/s were quantified by adhesion of trapped 2-microm spheres to macrophages. Rupture force distributions were dominated by nonspecific adhesion (forces <40 pN). On polystyrene, preadsorption of fibronectin or presence of serum proteins in the cell medium significantly enhanced adhesion strength from a mean rupture force of 20 pN to 28 pN or 33 pN, respectively. The enhancement of adhesion by fibronectin and serum is additive (mean rupture force of 43 pN). The fraction of specific binding forces in the presence of serum was similar for polystyrene and polymethyl-methacrylate, but specific binding forces were not observed for silica. Again, we found correlation to in vivo experiments, where the density of adherent cells is higher on polystyrene than on silica templates, and can be further enhanced by fibronectin adsorption. These findings show that in vitro adhesion testing can be used for template optimization and to substitute for in-vivo experiments.     

Innate non-specific cell substratum adhesion

Adhesion of motile cells to solid surfaces is necessary to transmit forces required for propulsion. Unlike mammalian cells, Dictyostelium cells do not make integrin mediated focal adhesions. Nevertheless, they can move rapidly on both hydrophobic and hydrophilic surfaces. We have found that adhesion to such surfaces can be inhibited by addition of sugars or amino acids to the buffer. Treating whole cells with αlpha-mannosidase to cleave surface oligosaccharides also reduces adhesion. The results indicate that adhesion of these cells is mediated by van der Waals attraction of their surface glycoproteins to the underlying substratum. Since glycoproteins are prevalent components of the surface of most cells, innate adhesion may be a common cellular property that has been overlooked.     

Affinity capture of proteins from solution and their dissociation by contact printing

Biological experiments at the solid/liquid interface, in general, require surfaces with a thin layer of purified molecules, which often represent precious material. Here, we have devised a method to extract proteins with high selectivity from crude biological sample solutions and place them on a surface in a functional, arbitrary pattern. This method, called affinity-contact printing (alphaCP), uses a structured elastomer derivatized with ligands against the target molecules. After the target molecules have been captured, they are printed from the elastomer onto a variety of surfaces. The ligand remains on the stamp for reuse. In contrast with conventional affinity chromatography, here dissociation and release of captured molecules to the substrate are achieved mechanically. We demonstrate this technique by extracting the cell adhesion molecule neuron-glia cell adhesion molecule (NgCAM) from tissue homogenates and cell culture lysates and patterning affinity-purified NgCAM on polystyrene to stimulate the attachment of neuronal cells and guide axon outgrowth.     

Rapid and Serial Quantification of Adhesion Forces of Yeast and Mammalian Cells

Cell adhesion to surfaces represents the basis for niche colonization and survival. Here we establish serial quantification of adhesion forces of different cell types using a single probe. The pace of single-cell force-spectroscopy was accelerated to up to 200 yeast and 20 mammalian cells per probe when replacing the conventional cell trapping cantilever chemistry of atomic force microscopy by underpressure immobilization with fluidic force microscopy (FluidFM). In consequence, statistically relevant data could be recorded in a rapid manner, the spectrum of examinable cells was enlarged, and the cell physiology preserved until approached for force spectroscopy. Adhesion forces of Candida albicans increased from below 4 up to 16 nN at 37°C on hydrophobic surfaces, whereas a Δhgc1-mutant showed forces consistently below 4 nN. Monitoring adhesion of mammalian cells revealed mean adhesion forces of 600 nN of HeLa cells on fibronectin and were one order of magnitude higher than those observed for HEK cells.     

Membrane tether formation from blebbing cells

Membrane tension has been proposed to be important in regulating cell functions such as endocytosis and cell motility. The apparent membrane tension has been calculated from tether forces measured with laser tweezers. Both membrane-cytoskeleton adhesion and membrane tension contribute to the tether force. Separation of the plasma membrane from the cytoskeleton occurs in membrane blebs, which could remove the membrane-cytoskeleton adhesion term. In renal epithelial cells, tether forces are significantly lower on blebs than on membranes that are supported by cytoskeleton. Furthermore, the tether forces are equal on apical and basolateral blebs. In contrast, tether forces from membranes supported by the cytoskeleton are greater in apical than in basolateral regions, which is consistent with the greater apparent cytoskeletal density in the apical region. We suggest that the tether force on blebs primarily contains only the membrane tension term and that the membrane tension may be uniform over the cell surface. Additional support for this hypothesis comes from observations of melanoma cells that spontaneously bleb. In melanoma cells, tether forces on blebs are proportional to the radius of the bleb, and as large blebs form, there are spikes in the tether force in other cell regions. We suggest that an internal osmotic pressure inflates the blebs, and the pressure calculated from the Law of Laplace is similar to independent measurements of intracellular pressures. When the membrane tension term is subtracted from the apparent membrane tension over the cytoskeleton, the membrane-cytoskeleton adhesion term can be estimated. In both cell systems, membrane-cytoskeleton adhesion was the major factor in generating the tether force.     

Impact of an extracellular polymeric substance (EPS) precoating on the initial adhesion of Burkholderia cepacia and Pseudomonas aeruginosa

Extracellular polymeric substances (EPS) significantly influence bacterial adhesion to solid surfaces, but it is difficult to elucidate the role of EPS on bacterial adhesion due to their complexity and variability. In the present study, the effect of EPS on the initial adhesion of B. cepaciaepacia PC184 and P. aeruginosa PAO1 on glass slides with and without an EPS precoating was investigated under three ionic strength conditions. The surface roughness of EPS coated slides was evaluated by atomic force microscopy (AFM), and its effect on initial bacterial adhesion was found to be trivial. X-ray photoelectron spectroscopy (XPS) studies were performed to determine the elemental surface compositions of bacterial cells and substrata. The results showed that an EPS precoating hindered bacterial adhesion on solid surfaces, which was largely attributed to the presence of proteins in the EPS. This observation can be attributed to the increased steric repulsion at high ionic strength conditions. A steric model for polymer brushes that considers the combined influence of steric effects and DLVO interaction forces is shown to adequately describe bacterial adhesion behaviors.     

Sulphonated polystyrene as an optimal substratum for the adhesion and spreading of mesenchymal cells in monovalent and divalent saline solutions.

Cell adhesion and spreading were studied on sulphonated polystyrene dishes in serum-free saline (Mn, Na, Cl, buffer) i.e., without an intervening protein layer. Spreading as a function of surface charge density, SCD, peaked around 2-10 negative charges per square nanometer, corresponding to a monomolecular layer of sulphonate ions. At optimal SCD, macrophages, BHK-C13 and whole mouse embryo secondary cells all showed considerable spreading, even in monovalent saline-more so than on a conventional tissue-culture surface. But outside this narrow range of SCD, or on protein-coated surfaces, the divalent cation was indispensable. The biphasic effect of sulphonation on cell adhesion is consistent with the theory that a substratum need not be biochemically specific, provided it is physiochemically polar, rigid and dense. According to this theory, polystyrene of sub-optimal SCD would not be sufficiently polar, while supra-optimal sulphonation would produce a hydrogel surface, lacking in local rigidity and density, due to osmotic swelling. The principle of polymer exclusion, by a surface hydrogel layer, is also consistent with observations on the inhibitory effects of adsorbed proteins-viz., albumin, collagen, serum and cellular exudate, respectively-contrasted with the ready attachment of cells to a bare, optimally charged substratum, in this minimal in vitro system.     

Do β-lactam antibiotics permeabilize the outer membrane of gram-negative bacteria? An electrochemical investigation

Abstract The extent of short-term adhesion of various suspension-cultured plant cell species to polymer substrates exhibiting a wide range of surface tensions was examined. Adhesion of cells with a relatively low surface tension, suspended in distilled water, to the polymers fluorinated ethylenepropylene (FEP), polystyrene (PS), polyethylene terephthalate (PET), and sulphonated polystyrene (SPS) increased with decreasing substrate surface tension following the sequence SPS < PET < PS < FEP. These results are in agreement with the predictions of a thermodynamic model of particle adhesion which considers the role of the substrate, suspending-liquid, and cellular surface tensions. In contrast, little adhesion of relatively high surface tension cells to any of the polymer substrates was observed. Electrostatic repulsive forces between these cells and the polymer surface prevent adhesion because the magnitude of the attractive van der Waals force is small. A correlation was observed between the general adhesiveness of the various cultured plant cell species, especially to the low surface tension substrates, and the cellular surface tension determined by measuring the water contact angle on smooth layers of the cells. The cellular surface tensions ranged from approximately 42 mJ/m² for Digitalis purpurea cells to approximately 70mJ/m² for Papaver somniferum cells. Adhesion of cells to the polymer substrates increased with decreasing cellular surface tension under otherwise identical conditions. These results are also consistent with thermodynamic model predictions.     

A comparison of thermodynamic approaches to predict the adhesion of dairy microorganisms to solid substrata.

Four different thermodynamic approaches were compared on their usefulness to predict correctly the adhesion of two fouling microogranisms from dairy processing to various solid substrata. The surface free energies of the interacting surfaces were derived from measured contact angles according to: 1. The equation of state; 2. The geometric-mean equation using dispersion and polar components neglecting spreading pressures; 3. The geometric-mean equation using dispersion and polar components while accounting for spreading pressures; and 4. The Lifshitz-van der Waals/Acid-Base approach. All approaches yielded similar surface free energies for the low energy surfaces. Application of approach 1 with different liquids did not give consistent values for the high surface free energy substrata. The dispersion or Lifshiftz-van der Waals components were nearly equal for approaches 2, 3, and 4; however, the polar or acid-base components differed greatly according to the approach followed. Approaches 1 and 2 correctly predicted that adhesion should occur, although the trend with respect to the various solid substrata was opposite the one experimentally observed, as was also the trend predicted by approach 4. Only approach 3 correctly predicted the observed bacterial adhesion with respect to the various solid substrata. In approach 3 and 4, adhesion was frequently found, despite a positive free energy of adhesion. This was attributed to either possible local attractive electrostatic interactions, inadequate weighing of surface free energy components in the calculation of free energies of adhesion, or to additional forces arising from structured interfacial water.     

Studies on cell adhesion in tissue culture : XV. Some effects of cycloheximide on cell detachment

Attempts were made to identify positively charged groups at the surfaces of Ehrlich ascites tumour (EAT) cells, and particles of polystyrene polymer which had adsorbed proteins after incubation in serum-containing culture medium. The cells and particles were treated with 2,4,6-trinitrobenzene sulphonic acid (TNBS) or 2,3-dimethylmaleic anhydride (DMA), which react with amino and other cationic groups. The increases in cell and particle anodic electrophoretic mobility were consistent with approx. 5% of the total surface charge of each, being due to positively charged groups. The effects of DMA or TNBS treatment of the cells and/or polystyrene surfaces, on the rates of cell adhesion to these surfaces were then determined. The significantly slower rates of adhesion after some modes of treatment suggest that positively charged groups at the surfaces of EAT cells play a part in their initial contact with and adhesion to, protein-coated plastic surfaces. However, quantitatively the role of cationic groups is a minor one in this part of the adhesion process.     

Effect of Cetylpyridinium Chloride on Microbial Adhesion to Hexadecane and Polystyrene

Microbial adhesion at the oil-water interface is a subject of both basic interest (e.g., as a technique for the measurement of hydrophobicity) and applied interest (e.g., for use in two-phase oil-water mouthwashes for the desorption of oral microorganisms). In general, surfactants inhibit microbial adhesion to oils and other hydrophobic surfaces. In the present study, we demonstrated that the cationic surfactant cetylpyridinium chloride (CPC) significantly enhanced microbial adhesion to hexadecane and various oils, as well as to the solid hydrophobic surface polystyrene. CPC increased adhesion to hexadecane of Escherichia coli, Candida albicans and Acinetobacter calcoaceticus MR-481 and of expectorated oral bacteria from near 0% to over 90%. The CPC concentration required for optimal enhancement of adhesion was a function of the initial cell density. This phenomenon was inhibited by high salt concentrations and, in the case of E. coli, by a low pH. CPC-pretreated cells were able to bind to hexadecane, but CPC-pretreated hexadecane was unable to bind untreated cells. Another cationic, surface-active antimicrobial agent, chlorhexidine gluconate, was similarly able to promote microbial adhesion to hexadecane. The results suggest that (i) CPC enhances microbial adhesion to hexadecane by binding via electrostatic interactions at the cell surface, thus diminishing surface charge and increasing cell surface hydrophobicity, and (ii) this phenomenon may have applications in oral formulations and in the use of hydrocarbon droplets as a support for cell immobilization.     

On the relative importance of specific and non-specific approaches to oral microbial adhesion.

In this paper, it is suggested that specificity and non-specificity in (oral) microbial adhesion are different expressions for the same phenomena. It is argued that the same basic, physicochemical forces are responsible for so-called 'non-specific' and 'specific' binding and that from a physico-chemical point of view the distinction between the two is an artificial one. Non-specific interactions arise from Van der Waals and electrostatic forces and hydrogen bonding, and originate from the entire cell. A specific bond consists of a combination of the same type of Van der Waals and electrostatic forces and hydrogen bonding, now originating from highly localized chemical groups, which together form a stereochemical combination. The absence or presence of specific receptor sites on microbial cell surfaces must therefore be reflected in the overall, non-specific surface properties of cells as well. This point is illustrated by showing that glucan-binding lectins on mutans streptococcal strains may determine the pH dependence of the zeta potentials of these cells. When studying microbial adhesion, a non-specific approach may be better suited to explain adhesion to inert substrata, whereas a specific approach may be preferred in case of adhesion to adsorbed protein films. Adhesion is, however, not as important in plaque formation in the human oral cavity as is retention, because low shear force periods, during which adhesion presumably occurs, are followed by high shear force periods, during which adhering cells must withstand these detachment forces. Evidence is provided that such detachment will be through cohesive failure in the pellicle mass, the properties of which are conditioned by the overall, non-specific substratum properties. Therefore, in vivo plaque formation may be more readily explained by a non-specific approach.     

Attachment of the Yeast Rhodosporidium toruloides Is Mediated by Adhesives Localized at Sites of Bud Cell Development

The basidiomycetous yeast Rhodosporidium toruloides (anamorph, Rhodotorula glutinis) is a common phylloplane epiphyte with biocontrol potential. To understand how R. toruloides adheres to plant surfaces, we obtained nonadherent fungal mutants after chemical mutagenesis with methane-sulfonic acid ethyl ester. Sixteen attachment-minus (Att⁻) mutants were identified by three methods: (i) screening capsule-minus colonies for loss of adhesive ability; (ii) enrichment for mutants unable to attach to polystyrene; and (iii) selection for reduced fluorescence of fluorescein isothiocyanate-concanavalin A (Con A)-stained cells by fluorescence-activated cell sorting. None of the 16 mutants attached to polystyrene or barley leaves. The lectin Con A eliminated adhesion in all of the wild-type isolates tested. Hapten competition assays indicated that Con A bound to mannose residues on the cell surface. Adhesion of wild-type R. toruloides was transient; nonadhesive cells subsequently became adhesive, with bud development. All Att⁻ mutants and nonattaching wild-type cells lacked polar regions that stained intensely with fluorescein isothiocyanate-Con A and India ink. Lectin, enzyme, and chemical treatments showed that the polar regions consisted of alkali-soluble materials, including mannose residues. Tunicamycin treatment reduced wild-type adhesion, indicating that the mannose residues could be associated with glycoproteins. We concluded that compounds, including mannose residues, that are localized at sites of bud development mediate adhesion of R. toruloides to both polystyrene and barley leaf surfaces.     

The measurement of Bacillus mycoides spore adhesion using atomic force microscopy,simple counting methods,and a spinning disk technique

An atomic force microscope has been used to study the adhesion of Bacillus mycoides spores to a hydrophilic glass surface and a hydrophobic-coated glass surface. AFM images of spores attached to the hydrophobic-coated mica surface allowed the measurement of spore dimensions in an aqueous environment without desiccation. The spore exosporium was observed to be flexible and to promote the adhesion of the spore by increasing the area of spore contact with the surface. Results from counting procedures using light microscopy matched the density of spores observed on the hydrophobic-coated glass surface with AFM. However, no spores were observed on the hydrophilic glass surface with AFM, a consequence of the weaker adhesion of the spores at this surface. AFM was also used to quantify directly the interactions of B. mycoides spores at the two surfaces in an aqueous environment. The measurements used "spore probes" constructed by immobilizing a single spore at the apex of a tipless AFM cantilever. The data showed that stretching and sequential bond breaking occurred as the spores were retracted from the hydrophilic glass surface. The greatest spore adhesion was measured at the hydrophobic-coated glass surface. An attractive force on the spores was measured as the spores approached the hydrophobic-coated surface. At the hydrophilic glass surface, only repulsive forces were measured during the approach of the spores. The AFM force measurements were in qualitative agreement with the results of a hydrodynamic shear adhesion assay that used a spinning disk technique. Quantitatively, AFM measurements of adhesive force were up to 4 x 10(3) times larger than the estimates made using the spinning disk data. This is a consequence of the different types of forces applied to the spore in the different adhesion assays. AFM has provided some unique insights into the interactions of spores with surfaces. No other instrument can make such direct measurements for single microbiological cells.     

Growth and morphology of anchorage-dependent animal cells in a liquid/liquid interface system

In general, anchorage-dependent animal cells cultivated on a solid culture substrate, such as polystyrene, are collected by trypsin treatment. This treatment may have detrimental effects such as the proteolysis of the cell membrane proteins. To avoid these effects, cell cultivation using a liquid/liquid interface system has been investigated. In this cultivation method, the cells grow at the interface between a culture medium and a hydrophobic liquid. In this study, various fluorocarbons (FC-40, FC-70, KPF-91, KPF-102, and KPF-142) were used as substrates for the interface, and the cultivation of fibroblast cells (L-929; the mouse-derived cell line) at the interfaces was investigated. Early in the cultivation period, the growth of L-929 cells depended on the substrate type. Although cell cultivation at the interfaces was possible, it was slower than that at the polystyrene surface. Cell spreading at the interfaces was relatively small, which indicates that cell adhesion at the interfaces may be weak. In particular, the cells at the MEM/FC-70 interface anchored with one another and formed multicellular hemispherical aggregations shaped like spheroids. The difference in the adhesions to the interfaces appears to be dependent on the contaminants contained in the fluorocarbons because the physical properties of the fluorocarbon did not affect the cell growth and adhesion. Moreover, subcultivation from the interfaces to the same interface was possible without trypsin treatment. In this case, the delay of the growth at the interfaces did not occur because the cells were not affected by trypsin treatment.     

Wettability of polymers by mucin aqueous solutions

The wettability of poly(methyl methacrylate) and polyethylene by water and aqueous mucin solutions have been studied by sessile drop and under-water captive air bubble contact angles, respectively. From the sessile drop and octane under-water contact angles the polymer-water interfaces have been characterized in terms of works of adhesion and acid-base (polar) interactions. A large water-air contact angle hysteresis observed with poly(methyl methacrylate) surfaces has been attributed to side-chain beta relaxations of polymer ester methyl groups. The wettabilities of the polymers by mucin aqueous solutions have been studied as a function of protein concentration and related to the surface tensions. A positive slope of adhesion tension vs surface tension line, characteristic of polar surfaces, was found with poly(methyl methacrylate). By contrast, a change in the slope, explained as a change in mucin relative adsorption densities at solid/liquid and solid/vapour interfaces, was observed with polyethylene. This adhesion tension behavior appeared to be in agreement with previous data we have published concerning the quantity and state of mucin which are adsorbed to polymers characterized by different surface properties.