PCR cloning of a protein-coding part of the thioredoxin gene fromStreptomyces aureofaciens

Summary The method of two-stage half-specific amplification was described and successfully used in the isolation of the protein-coding part of the thioredoxin gene from Streptomyces aureofaciens BMK. The efficiency of a new PCR modification for the specific amplification of the target DNA fragments (genes) with unknown sequences is compared with the used half-specific PCR. The determined target sequence demonstrates the highest homology with the thioredoxin genes from Corynebacterium nephridii C-1 and Anabaena 7119.     

Relative quantification of chrysanthemum yellows (16Sr I) phytoplasma in its plant and insect host using real-time polymerase chain reaction

A real-time polymerase chain reaction (PCR) method for the quantification of chrysanthemum yellows (CY) phytoplasma DNA in its plant (Chrysanthemum carinatum) and insect (Macrosteles quadripunctulatus) host is described. The quantity of CY DNA was measured in each run relative to the amount of host DNA in the sample. Primers and a TaqMan probe for the specific PCR amplification of phytoplasma DNA were designed on a cloned CY-specific ribosomal fragment. Primers and TaqMan probes were also designed on sequences of the internal transcribed spacer region of the insect’s ITS1 rDNA and of the plant’s 18S rDNA for amplification from C. carinatum and M. quadripunculatus, respectively. Absolute quantification of CY DNA was achieved by comparison with a dilution series of the plasmid containing a CY 16S rDNA target sequence. Absolute quantification of plant and insect DNAs was achieved by comparison with a dilution series of the corresponding DNAs. Quantification of CY DNA in relation to host DNA was finally expressed as genome units (GU) of phytoplasma DNA per nanogram of host (plant or insect) DNA. Relative quantification avoided influences due to different yields during the DNA extraction procedure. The quantity of CY DNA was about 10,000–20,000 GU/ng of plant DNA and about 30,000–50,000 GU/ng of insect DNA. The method described could be used to phytoplasma multiplication and movement in different plant and insect hosts.     

An improved strategy for rapid direct sequencing of both strands of long DNA molecules cloned in a plasmid.

A strategy for kilo-base sequencing of a target DNA cloned in plasmid pWR34 is described. A long target DNA is progressively shortened from one end, by digestion with BAL31 nuclease or exonuclease III and nuclease S1, followed by cleaving off the shortened vector DNA. The family of the shortened target DNA molecule is next cloned in between the StuI site on one end, and a cohesive-ended restriction site on the other end, within the polylinker region of pWR34. DNA fragments cloned into this plasmid are sequenced directly by using a synthetic oligonucleotide primer, which binds to one side of the polylinker region using the dideoxynucleotide chain-termination method. The plasmid DNA, easily obtained by adoption of a rapid mini-preparation, is usually pure enough for direct DNA sequencing. Thus, both strands of any DNA several thousand base pairs in length can be completely sequenced (using two different primers) with ease within a short time, without the need for constructing a physical map.     

Biolistic mediated site-specific integration in rice

Cre-lox mediated site-specific integration in tobacco or Arabidopsis used polyethylene glycol or Agrobacterium, respectively, to deliver the integrating DNA. The polyethylene glycol method is inconvenient since it requires the use of protoplasts. The Agrobacterium method is inefficient as the single-stranded T-DNA is not a substrate for Cre-lox recombination. In this study, we tested the biolistic method for the site-specific insertion of DNA into the rice genome. Two target callus lines, each harboring a single genomic lox target, were generated by Agrobacterium-mediated transformation. The target callus lines were subjected to a second round of transformation by particle bombardment with a construct designed to excise the plasmid backbone from the integrating DNA, followed by the recombination of the integrating DNA into the genomic lox target. Site-specific integration was obtained from both target callus lines. Three integrant plants were regenerated from one target line and were found to have a precise copy of the integrating DNA at the target site, although only one plant has the integrating DNA as the sole copy in the genome. Site-specific integration through the biolistic delivery of DNA can be considered for other plants that are transformable via particle bombardment.     

Genetic analysis of forest tree populations: isolation of DNA from spruce and fir apices

A method is described for the isolation of DNA from spruce and fir, starting with 3 to 5 apices (5 mg material). Apices are prepared manually from dormant buds harvested in summer and autumn, which are homogenized in 30 l buffer containing 1% SDS. The DNA is extracted with phenol and precipitated with ethanol. Agarose gel electrophoresis and Southern hybridization show that its molecular length is ca. 30–40 kb and that it is readily digested with various restriction enzymes. The method is very fast, it does not need CsCl centrifugation and is therefore suited for the analysis of large numbers of individual trees. Moreover, the buds can be collected all over the year. The yield of the method is up to 30 g of high molecular weight DNA, enough to do several digests and hybridizations.     

Deletion loop mutagenesis: a novel method for the construction of point mutations using deletion mutants

Deletion loop mutagenesis is a new, general method for site-directed mutagenesis that allows point mutations to the introduced within a sequence of DNA defined by a previously isolated deletion mutant. Wild type and deletion mutant DNA are cloned into a bacterial plasmid and each is cleaved with a different single cut restriction enzyme. Heteroduplexes are formed between the two DNAs to produce circular molecules containing a nick in each strand and a single-stranded deletion loop. The deletion loops are mutagenised using sodium bisulphite and the DNA transfected directly into a uracil repair deficient strain of Escherichia coli. Up to half of the resultant clones contain DNA produced by replication of the wild-type length strand and bear mutations exclusively within the target area. An example is given in which a deletion mutant lacking 21 nucleotides from the region coding for SV40 large-T was used. Eight of the possible nine target cytosine residues were mutagenised. The method described is specific, efficient and simple.     

A new approach to retrieve full lengths of functional genes from soil by PCR-DGGE and metagenome walking

Metagenomes are a vast genetic resource, and various approaches have been developed to explore them. Here, we present a new approach to retrieve full lengths of functional genes from soil DNA using PCR-denaturing gradient gel electrophoresis (DGGE) followed by metagenome walking. Partial fragments of benzoate 1,2-dioxygenase alpha subunit gene (benA) were detected from a 3-chlorobenzoate (3CB)-dosed soil by PCR-DGGE, and one DGGE band induced by 3CB was used as a target fragment for metagenome walking. The walking retrieved the flanking regions of the target fragment from the soil DNA, resulting in recovery of the full length of benA and also downstream gene (benB). The same strategy retrieved another gene, tfdC, and a complete tfdC and two downstream genes were obtained from the same soil. PCR-DGGE allows screening for target genes based on their potential for degrading contaminants in the environment. This feature provides an advantage over other existing metagenomic approaches.     

A novel real-time quantitative PCR method using attached universal template probe

A novel real-time quantitative polymerase chain reaction (PCR) method using an attached universal template (UT) probe is described. The UT is an approximately 20 base attachment to the 5′ end of a PCR primer, and it can hybridize with a complementary TaqMan probe. One of the advantages of this method is that different target DNA sequences can be detected employing the same UT probe, which substantially reduces the cost of real-time PCR set-up. In addition, this method could be used for simultaneous detection using a 6-carboxy-fluorescein-labeled UT probe for the target gene and a 5-hexachloro-fluorescein-labeled UT probe for the reference gene in a multiplex reaction. Moreover, the requirement of target DNA length for UT–PCR analysis is relatively flexible, and it could be as short as 56 bp in this report, suggesting the possibility of detecting target DNA from partially degraded samples. The UT–PCR system with degenerate primers could also be designed to screen homologous genes. Taken together, our results suggest that the UT–PCR technique is efficient, reliable, inexpensive and less labor-intensive for quantitative PCR analysis.     

"Run-off" synthesis and application of defined single-stranded DNA hybridization probes.

A simple and efficient method for synthesizing radioactively labeled single-stranded DNA hybridization probes with Thermus aquaticus (Taq) DNA polymerase is described. This is done in a "run-off" polymerization with repeated cycles of denaturation, annealing, and extension. It leads to high yields of a single-stranded DNA of defined length (up to 5000 nt), which is labeled to a high specific activity (1.3 x 10(8) cpm/micrograms DNA). These hybridization probes are equally sensitive as nick-translated DNA probes, but strand specific. This was tested by slot blot hybridization with in vitro-transcribed target RNAs and by Northern blotting. The use of single-stranded DNA hybridization probes combines the benefits of DNA stability and single-strand RNA probes.     

Analysis of the junctions between human immunodeficiency virus type 1 proviral DNA and human DNA.

Integrated retroviral DNA is flanked by short direct repeats of the target DNA. The length of these repeats is specific for the provirus that is integrated (H.E. Varmus, in J.A. Shapiro, ed., Mobile Genetic Elements, 1983). For the human immunodeficiency virus type I (HIV-1), the length of the direct repeats in the target DNA was shown to be 5 bp in one case (Muesing et al., Nature [London] 313:450-458, 1985) and 7 bp in another (Starcich et al., Science 227:538-540, 1985). One possible explanation for this discrepancy is that the direct repeats flanking HIV-1 proviruses are variable. To investigate this, we analyzed the junctions between HIV-1 proviral DNA and human DNA from nine individual clones. In each clone the provirus was flanked by a 5-bp direct repeat of human DNA. Analysis of the proviral clone previously described as being flanked by a 7-bp direct repeat of target DNA (Starcich et al., op. cit.) revealed that this clone was flanked by a 5-bp repeat instead. Therefore, we conclude that HIV-1 proviruses are flanked by 5-bp direct repeats of human DNA. The sequences of the 5-bp duplications from the different proviral clones do not have any apparent similarity to each other or to HIV-1 DNA.     

Regional mutagenesis using Dissociation in maize

We describe genetic screens, molecular methods and web resources newly available to utilize Dissociation (Ds) as an insertional mutagen in maize. Over 1700 Ds elements have been distributed throughout the maize genome to serve as donor elements for local or regional mutagenesis. Two genetic screens are described to identify Ds insertions in genes-of-interest (goi). In scheme I, Ds is used to generate insertion alleles when a recessive reference allele is available. A Ds insertion will enable the cloning of the target gene and can be used to create an allelic series. In scheme II, Ds insertions in a goi are identified using a PCR-based screen to identify the rare insertion alleles among a population of testcross progeny. We detail an inverse PCR protocol to rapidly amplify sequences flanking Ds insertion alleles and describe a high-throughput 96-well plate-based DNA extraction method for the recovery of high-quality genomic DNA from seedling tissues. We also describe several web-based tools for browsing, searching and accessing the genetic materials described. The development of these Ds insertion lines promises to greatly accelerate functional genomics studies in maize.     

Selection and identification of a new adhesion protein of Cryptosporidium parvum from a cDNA library by ribosome display

In this study, we described a novel display method to identify surface adhesion proteins of Cryptosporidium parvum. A cDNA library of the sporozoite and oocyst stages of C. parvum was expressed on ribosome and selectively and specifically screened with intestinal epithelial cells (IECs) from newborn Cryptosporidium-free Holstein calves. Proteins were then enriched using a multi-step panning procedure. A new surface adherence protein of C. parvum was selected, named Cp20. Sequence analyses showed that Cp20 has a N-terminal signal peptide and four transmembrane regions. Indirect immunofluorescence assay (IFA) using an antibody specific for rCp20 demonstrated that the antibody specifically bound to the surface of sporozoites and oocysts. The recombinant plasmid pVAX1-Cp20 was constructed to examine the potential of the Cp20 gene as a target for specific preventive and therapeutic measures for cryptosporidiosis. The in vivo efficacies of the DNA vaccine was tested in BALB/c mice. The results indicated that the DNA vaccine elicited significant antibody responses and specific cellular responses when compared to control mice that received vector only or PBS. The DNA vaccine induced strong protective immune response against C. parvum and lower level of the oocysts shedding after challenge infection. This study suggested that Cp20 could serve as an effective target for specific preventive and therapeutic measures for cryptosporidiosis.     

Inheritance of chloroplast and mitochondrial DNA in Picea and composition of hybrids from introgression zones

Summary The cloning of white spruce (Picea glauca) mitochondrial DNA homologous to the cytochrome oxidase II and ATPase genes of maize is described. These probes were used to define restriction fragment length polymorphisms which distinguish the white, Engelmann (P. engelmannii) and Sitka spruce (P. sitchensis) populations that occur in British Columbia. Analysis of progeny from crosses between the species revealed that mitochondrial DNA was maternally inherited in all cases (32 progeny from five independent crosses). The inheritance of chloroplast DNA was determined using a probe described previously; in this case, all progeny exhibited paternal inheritance (27 progeny from four crosses). Mitochondrial and chloroplast probes were used to test trees from zones of introgression between coastal (Sitka) and interior spruces (white and Engelmann). In most cases mitochondria and chloroplasts within individuals were contributed by different species. The data shows that there is a significant Sitka spruce component in trees east of the coastal watershed in British Columbia.     

Incorporation of measurement of DNA integrity into qPCR assays

Optimal accuracy of quantitative PCR (qPCR) requires correction for integrity of the target sequence. Here we combine the mathematics of the Poisson distribution and exponential amplification to show that the frequency of lesions per base (which prevent PCR amplification) can be derived from the slope of the regression line between cycle threshold (Ct) and amplicon length. We found that the amplifiable fraction (AF) of a target can be determined from this frequency and the target length. Experimental results from this method correlated with both the magnitude of a damaging agent and with other measures of DNA damage. Applying the method to a reference sequence, we determined the values for lesions/base in control samples, as well as in the AFs of the target sequence in qPCR samples collected from leukemic patients. The AFs used to calculate the final qPCR result were generally >0.5, but were <0.2 in a few samples, indicating significant degradation. We conclude that DNA damage is not always predictable; quantifying the DNA integrity of a sample and determining the AF of a specific qPCR target will improve the accuracy of qPCR and aid in the interpretation of negative results.     

Characterization of species-specific repeated DNA sequences from B. nigra

Summary The construction and characterization of two genome-specific recombinant DNA clones from B. nigra are described. Southern analysis showed that the two clones belong to a dispersed repeat family. They differ from each other in their length, distribution and sequence, though the average GC content is nearly the same (45%). These B genome-specific repeats have been used to analyse the phylogenetic relationships between cultivated and wild species of the family Brassicaceae.     

A simple and rapid nucleotide sequencing strategy and its application in analyzing a rice histone 3 gene

An improved rapid method for sequencing a target DNA is described. A new plasmid, pAA-PZ1, which contains the origin of replication from phage M13 and a portion of the Tn9 transposon was constructed. A long fragment of target DNA cloned into this vector is progressively shortened in vivo from one end by transposon-mediated deletions. The plasmids carrying different lengths of target DNA are then made into single-stranded DNA in the same host upon infection with an M13 phage and their sequence is determined using the dideoxynucleotide chain-termination method. This method bypasses the in vitro enzymatic manipulations for progressive deletions and requires no subcloning. Using this strategy, we sequenced 1.3 kb of rice DNA containing a histone 3 gene within three weeks.     

Estimating nucleotide diversity from random amplified polymorphic DNA and amplified fragment length polymorphism data

A way to estimate the index of nucleotide diversity (pi) from band match frequencies in random amplified polymorphic DNA and amplified fragment length polymorphism data is described. pi is shown to be a simple function of the proportion of mismatched bands between two individuals drawn at random from a population (phi) and the number of discriminating sites in the amplification system. The method is computationally and conceptually simple and avoids some of the assumptions inherent in other approaches: the relationship is independent of the base composition of the target DNA and avoids the bias inherent in estimations of allelic frequencies in dominant systems. Only two individuals from a population are needed to estimate pi. This economy of material suggests utility of this approach in conservation genetics or other fields where obtaining large samples is impractical or undesirable.     

A rapid DNA extraction method for sugarcane and its relatives

A simple DNA extraction method based on CTAB precipitation was used to obtain DNA from members of the genusSaccharum and related species. DNA yields and purities were similar for allSaccharum species sampled. The method described here resulted in high quality total DNA suitable for polymerase chain reaction (PCR)-based techniques as well as restriction endonuclease digestion, Southern hybridization, and DNA cycle-sequencing.