Head-Head Interactions of Resting Myosin Crossbridges in Intact Frog Skeletal Muscles,Revealed by Synchrotron X-Ray Fiber Diffraction

The intensities of the myosin-based layer lines in the x-ray diffraction patterns from live resting frog skeletal muscles with full thick-thin filament overlap from which partial lattice sampling effects had been removed were analyzed to elucidate the configurations of myosin crossbridges around the thick filament backbone to nanometer resolution. The repeat of myosin binding protein C (C-protein) molecules on the thick filaments was determined to be 45.33 nm, slightly longer than that of myosin crossbridges. With the inclusion of structural information for C-proteins and a pre-powerstroke head shape, modeling in terms of a mixed population of regular and perturbed regions of myosin crown repeats along the filament revealed that the myosin filament had azimuthal perturbations of crossbridges in addition to axial perturbations in the perturbed region, producing pseudo-six-fold rotational symmetry in the structure projected down the filament axis. Myosin crossbridges had a different organization about the filament axis in each of the regular and perturbed regions. In the regular region that lacks C-proteins, there were inter-molecular interactions between the myosin heads in axially adjacent crown levels. In the perturbed region that contains C-proteins, in addition to inter-molecular interactions between the myosin heads in the closest adjacent crown levels, there were also intra-molecular interactions between the paired heads on the same crown level. Common features of the interactions in both regions were interactions between a portion of the 50-kDa-domain and part of the converter domain of the myosin heads, similar to those found in the phosphorylation-regulated invertebrate myosin. These interactions are primarily electrostatic and the converter domain is responsible for the head-head interactions. Thus multiple head-head interactions of myosin crossbridges also characterize the switched-off state and have an important role in the regulation or other functions of myosin in thin filament-regulated muscles as well as in the thick filament-regulated muscles.     

3D structure of relaxed fish muscle myosin filaments by single particle analysis

To understand the structural changes involved in the force-producing myosin cross-bridge cycle in vertebrate muscle it is necessary to know the arrangement and conformation of the myosin heads at the start of the cycle (i.e. the relaxed state). Myosin filaments isolated from goldfish muscle under relaxing conditions and viewed in negative stain by electron microscopy (EM) were divided into segments and subjected to three-dimensional (3D) single particle analysis without imposing helical symmetry. This allowed the known systematic departure from helicity characteristic of vertebrate striated muscle myosin filaments to be preserved and visualised. The resulting 3D reconstruction reveals details to about 55 A resolution of the myosin head density distribution in the three non-equivalent head 'crowns' in the 429 A myosin filament repeat. The analysis maintained the well-documented axial perturbations of the myosin head crowns and revealed substantial azimuthal perturbations between crowns with relatively little radial perturbation. Azimuthal rotations between crowns were approximately 60 degrees , 60 degrees and 0 degrees , rather than the regular 40 degrees characteristic of an unperturbed helix. The new density map correlates quite well with the head conformations analysed in other EM studies and in the relaxed fish muscle myosin filament structure modelled from X-ray fibre diffraction data. The reconstruction provides information on the polarity of the myosin head array in the A-band, important in understanding the geometry of the myosin head interaction with actin during the cross-bridge cycle, and supports a number of conclusions previously inferred by other methods. The observed azimuthal head perturbations are consistent with the X-ray modelling results from intact muscle, indicating that the observed perturbations are an intrinsic property of the myosin filaments and are not induced by the proximity of actin filaments in the muscle A-band lattice. Comparison of the axial density profile derived in this study with the axial density profile of the X-ray model of the fish myosin filaments which was restricted to contributions from the myosin heads allows the identification of a non-myosin density peak associated with the azimuthally perturbed head crown which can be interpreted as a possible location for C-protein or X-protein (MyBP-C or -X). This position for C-protein is also consistent with the C-zone interference function deduced from previous analysis of the meridional X-ray pattern from frog muscle. It appears that, along with other functions, C-(X-) protein may have the role of slewing the heads of one crown so that they do not clash with the neighbouring actin filaments, but are readily available to interact with actin when the muscle is activated.     

Axial disposition of myosin heads in isometrically contracting muscles

Meridional x-ray diffraction diagrams, recorded with high angular resolution, from muscles contracting at the plateau of isometric tension show that the myosin diffraction orders are clusters of peaks. These clusters are due to pronounced interference effects between the myosin diffracting units on either side of the M-line. A theoretical analysis based on the polarity of the myosin (and actin) filaments shows that it is possible to extract phase information from which the axial disposition of the myosin heads can be determined. The results show that each head in a crown pair has a distinct structural disposition. It appears that only one of the heads in the pair stereospecifically interacts with the thin filament at any one time.     

Structural changes accompanying phosphorylation of tarantula muscle myosin filaments

Electron microscopy has been used to study the structural changes that occur in the myosin filaments of tarantula striated muscle when they are phosphorylated. Myosin filaments in muscle homogenates maintained in relaxing conditions (ATP, EGTA) are found to have nonphosphorylated regulatory light chains as shown by urea/glycerol gel electrophoresis and [32P]phosphate autoradiography. Negative staining reveals an ordered, helical arrangement of crossbridges in these filaments, in which the heads from axially neighboring myosin molecules appear to interact with each other. When the free Ca2+ concentration in a homogenate is raised to 10(-4) M, or when a Ca2+-insensitive myosin light chain kinase is added at low Ca2+ (10(-8) M), the regulatory light chains of myosin become rapidly phosphorylated. Phosphorylation is accompanied by potentiation of the actin activation of the myosin Mg-ATPase activity and by loss of order of the helical crossbridge arrangement characteristic of the relaxed filament. We suggest that in the relaxed state, when the regulatory light chains are not phosphorylated, the myosin heads are held down on the filament backbone by head-head interactions or by interactions of the heads with the filament backbone. Phosphorylation of the light chains may alter these interactions so that the crossbridges become more loosely associated with the filament backbone giving rise to the observed changes and facilitating crossbridge interaction with actin.     

A model to account for the elastic element in muscle crossbridges in terms of a bending myosin rod

We advance a structural model to account for the rapid elastic element seen in mechanical transient experiments on vertebrate skeletal muscle (A.F. Huxley & Simmons 1971 Nature, Lond. 233, 533-538). In contrast to other crossbridge models, ours does not envisage a myosin rod made up of two rigid portions connected by a hinge, but rather a gradually bending rod portion connecting the heads to the thick filament shaft. We propose that, in relaxed muscle, the subfragment 2 (S2) portion of the myosin rod is bound to the thick filament shaft by ionic interactions analogous to those between the light meromyosin (LMM) portions of the rod that constitute the body of the shaft. These interactions probably involve the alternating zones of positive and negative charge seen in myosin rod amino acid sequences. As the crossbridge cycle that generates tension begins, we propose that part of S2 detaches from the thick filament shaft and bends to enable the myosin head to attach to actin. When tension develops in the crossbridge, the S2 is straightened and more of it becomes detached from the shaft so that the junction between S2 and the myosin heads moves 3-4 nm axially. As tension declines at the end of the crossbridge stroke, we propose that S2 rebinds to the thick filament shaft and that this provides the restoring force to return the junction of the heads and S2 to its original axial position. Thus this movement would have the characteristics of an elastic element; detailed calculations indicate that it would have properties similar to those observed experimentally. Furthermore, this model can account for the radial attractive force seen in rigor and in contracting muscle, the decrease in stiffness when interfilament spacing is increased in skinned muscle, and the increased rate of proteolysis observed at the S2-LMM junction in contracting muscle.     

Structure and nucleotide-dependent changes of thick filaments in relaxed and rigor plaice fin muscle

The myosin crossbridge array, positions of non-crossbridge densities on the backbone, and the A-band "end filaments" have been compared in chemically skinned, unfixed, uncryoprotected relaxed, and rigor plaice fin muscles using the freeze-fracture, deep-etch, rotary-shadowing technique. The images provide a direct demonstration of the helical packing of the myosin heads in situ in relaxed muscle and show rearrangements of the myosin heads, and possibly of other myosin filament proteins, when the heads lose ATP on going into rigor. In the H-zone these changes are consistent with crossbridge changes previously shown by others using freeze-substitution. In addition, new evidence is presented of protein rearrangements in the M-region (bare zone), associated with the transition from the relaxed to the rigor state, including a 27-nm increase in the apparent width of the M-region. This is interpreted as being mostly due to loss or rearrangement of a nonmyosin (M9) protein component at the M-region edge. The structure and titin periodicity of the end-filaments are described, as are suggestions of titin structure on the myosin filament backbone.     

Myosin crossbridge orientation in demembranated muscle fibres studied by birefringence and X-ray diffraction measurements

Muscle contraction is generally thought to involve changes in the orientation of myosin crossbridges during their ATP-driven cyclical interaction with actin. We have investigated crossbridge orientation in equilibrium states of the crossbridge cycle in demembranated fibres of frog and rabbit muscle, using a novel combination of techniques: birefringence and X-ray diffraction. Muscle birefringence is sensitive to both crossbridge orientation and the transverse spacing of the contractile filament lattice. The latter was determined from the equatorial X-ray diffraction pattern, allowing accurate characterization of the orientation component of birefringence changes. We found that this component decreased when relaxed muscle fibres were put into rigor at rest length, and when either the ionic strength or temperature of relaxed fibres was lowered. In each case the birefringence decrease was accompanied by an increase in the intensity of the (1,1) equatorial X-ray reflection relative to that of the (1,0) reflection. When fibres that had been stretched largely to eliminate overlap between actin- and myosin-containing filaments were put into rigor, there was no change in the orientation component of the birefringence. When isolated myosin subfragment-1 was bound to these rigor fibres, the orientation component of the birefringence increased. The birefringence changes at rest length are likely to be due to changes in the orientation of myosin crossbridges, and in particular of the globular head region of the myosin molecules. In relaxed fibres from rabbit muscle, at 100 mM ionic strength, 15 degrees C, the long axis of the heads appears to be relatively well aligned with the filament axis. When fibres are put into rigor, or the temperature or ionic strength is lowered, the degree of alignment decreases and there is a transfer of crossbridge mass towards the actin-containing filaments.     

Probing Muscle Myosin Motor Action: X-Ray (M3 and M6) Interference Measurements Report Motor Domain Not Lever Arm Movement

The key question in understanding how force and movement are produced in muscle concerns the nature of the cyclic interaction of myosin molecules with actin filaments. The lever arm of the globular head of each myosin molecule is thought in some way to swing axially on the actin-attached motor domain, thus propelling the actin filament past the myosin filament. Recent X-ray diffraction studies of vertebrate muscle, especially those involving the analysis of interference effects between myosin head arrays in the two halves of the thick filaments, have been claimed to prove that the lever arm moves at the same time as the sliding of actin and myosin filaments in response to muscle length or force steps. It was suggested that the sliding of myosin and actin filaments, the level of force produced and the lever arm angle are all directly coupled and that other models of lever arm movement will not fit the X-ray data. Here, we show that, in addition to interference across the A-band, which must be occurring, the observed meridional M3 and M6 X-ray intensity changes can all be explained very well by the changing diffraction effects during filament sliding caused by heads stereospecifically attached to actin moving axially relative to a population of detached or non-stereospecifically attached heads that remain fixed in position relative to the myosin filament backbone. Crucially, and contrary to previous interpretations, the X-ray interference results provide little direct information about the position of the myosin head lever arm; they are, in fact, reporting relative motor domain movements. The implications of the new interpretation are briefly assessed.     

Three-Dimensional Structure of the M-region (Bare Zone) of Vertebrate Striated Muscle Myosin Filaments by Single-Particle Analysis

The rods of anti-parallel myosin molecules overlap at the centre of bipolar myosin filaments to produce an M-region (bare zone) that is free of myosin heads. Beyond the M-region edges, myosin molecules aggregate in a parallel fashion to yield the bridge regions of the myosin filaments. Adjacent myosin filaments in striated muscle A-bands are cross-linked by the M-band. Vertebrate striated muscle myosin filaments have a 3-fold rotational symmetry around their long axes. In addition, at the centre of the M-region, there are three 2-fold axes perpendicular to the filament long axis, giving the whole filament dihedral 32-point group symmetry. Here we describe the three-dimensional structure obtained by a single-particle analysis of the M-region of myosin filaments from goldfish skeletal muscle under relaxing conditions and as viewed in negative stain. This is the first single-particle reconstruction of isolated M-regions. The resulting three-dimensional reconstruction reveals details to about 55 Å resolution of the density distribution in the five main nonmyosin densities in the M-band (M6′, M4′, M1, M4 and M6) and in the myosin head crowns (P1, P2 and P3) at the M-region edges. The outermost crowns in the reconstruction were identified specifically by their close similarity to the corresponding crown levels in our previously published bridge region reconstructions. The packing of myosin molecules into the M-region structure is discussed, and some unidentified densities are highlighted.     

Arrangement of myosin heads on Limulus thick filaments

The two myosin heads with a single surface subunit on thick filaments from chelicerate arthropod muscle may originate from the same, or from axially sequential molecules, as suggested by three-dimensional reconstructions. The resolution attained in the reconstructions, however, does not permit one to distinguish unequivocally between these two possible arrangements. We examined the effect of 0.6 M KCl on relaxed thick filaments separated from Limulus muscle and filaments in which nearest myosin heads were cross-linked by the bifunctional agent, 3,3'-dithio-bis[3'(2')-O-[6-propionylamino)hexanoyl]adenosine 5'-triphosphate (bis22ATP), in the presence of vanadate (Vi). In high salt, surface myosin dissolved from both native, relaxed filaments and those exposed to 1-2 mM dithiothreitol after cross-linking, but was retained on filaments with cross-linked heads. Since bis22ATP must form intermolecular bonds between myosin heads within each subunit to prevent myosin solubilization in high salt, we conclude that each of these heads originates from a different myosin molecule, as was previously predicted by the reconstructions.     

Fluorescent probes of the orientation of myosin regulatory light chains in relaxed, rigor, and contracting muscle.

The orientation of the light-chain region of myosin heads in relaxed, rigor, and isometrically contracting fibers from rabbit psoas muscle was studied by fluorescence polarization. Cysteine 108 of chicken gizzard myosin regulatory light chain (cgRLC) was covalently modified with iodoacetamidotetramethylrhodamine (iodo-ATR). Native RLC of single glycerinated muscle fibers was exchanged for labeled cgRLC in a low [Mg2+] rigor solution at 30 degrees C. Troponin and troponin C removed in this procedure were replaced. RLC exchange had little effect on active force production. X-ray diffraction showed normal structure in rigor after RLC exchange, but loss of axial and helical order in relaxation. In isolated myofibrils labeled cgRLC was confined to the regions of the sarcomere containing myosin heads. The ATR dipoles showed a preference for orientations perpendicular to the fiber axis, combined with limited nanosecond rotational motion, in all conditions studied. The perpendicular orientation preference was more marked in rigor than in either relaxation or active contraction. Stretching relaxed fibers to sarcomere length 4 microns to eliminate overlap between actin- and myosin-containing filaments had little effect on the orientation preference. There was no change in orientation preference when fibers were put into rigor at sarcomere length 4.0 microns. Qualitatively similar results were obtained with ATR-labeled rabbit skeletal RLC.     

ATP binding and crossbridge structure in muscle

Thick filaments extracted from insect flight muscle were used in examining whether the dependence of actin-myosin crossbridge structure on nucleotide, generally presumed to underlie the power-stroke, is exhibited by myosin alone. The strongly periodic crossbridge arrangement seen in the presence of ATP (corresponding to relaxed muscle) is reversibly lost in conditions that induce rigor in intact muscle fibres. These observations suggest that the power-stroke may involve changes in the steric relation of the myosin head to the thick as well as to the thin filament.     

Different Head Environments in Tarantula Thick Filaments Support a?Cooperative Activation Process

Myosin filaments from many muscles are activated by phosphorylation of their regulatory light chains (RLCs). Structural analysis of relaxed tarantula thick filaments shows that the RLCs of the interacting free and blocked myosin heads are in different environments. This and other data suggested a phosphorylation mechanism in which Ser-35 of the free head is exposed and constitutively phosphorylated by protein kinase C, whereas the blocked head is hidden and unphosphorylated; on activation, myosin light chain kinase phosphorylates the monophosphorylated free head followed by the unphosphorylated blocked head, both at Ser-45. Our goal was to test this model of phosphorylation. Mass spectrometry of quickly frozen, intact muscles showed that only Ser-35 was phosphorylated in the relaxed state. The location of this constitutively phosphorylated Ser-35 was analyzed by immunofluorescence, using antibodies specific for unphosphorylated or phosphorylated Ser-35. In the relaxed state, myofibrils were labeled by anti-pSer-35 but not by anti-Ser-35, whereas in rigor, labeling was similar with both. This suggests that only pSer-35 is exposed in the relaxed state, while in rigor, Ser-35 is also exposed. In the interacting-head motif of relaxed filaments, only the free head RLCs are exposed, suggesting that the constitutive pSer-35 is on the free heads, consistent with the proposed mechanism.     

Different Head Environments in Tarantula Thick Filaments Support a Cooperative Activation Process

Myosin filaments from many muscles are activated by phosphorylation of their regulatory light chains (RLCs). Structural analysis of relaxed tarantula thick filaments shows that the RLCs of the interacting free and blocked myosin heads are in different environments. This and other data suggested a phosphorylation mechanism in which Ser-35 of the free head is exposed and constitutively phosphorylated by protein kinase C, whereas the blocked head is hidden and unphosphorylated; on activation, myosin light chain kinase phosphorylates the monophosphorylated free head followed by the unphosphorylated blocked head, both at Ser-45. Our goal was to test this model of phosphorylation. Mass spectrometry of quickly frozen, intact muscles showed that only Ser-35 was phosphorylated in the relaxed state. The location of this constitutively phosphorylated Ser-35 was analyzed by immunofluorescence, using antibodies specific for unphosphorylated or phosphorylated Ser-35. In the relaxed state, myofibrils were labeled by anti-pSer-35 but not by anti-Ser-35, whereas in rigor, labeling was similar with both. This suggests that only pSer-35 is exposed in the relaxed state, while in rigor, Ser-35 is also exposed. In the interacting-head motif of relaxed filaments, only the free head RLCs are exposed, suggesting that the constitutive pSer-35 is on the free heads, consistent with the proposed mechanism.     

Equilibrium muscle crossbridge behavior: The interaction of myosin crossbridges with actin

The interaction of myosin crossbridges with actin under equilibrium conditions is reviewed. Similarities and differences between the weakly- and strongly-binding interactions of myosin crossbridges with actin filaments are discussed. A precise, narrow definition of weakly- binding crossbridges is given. It is postulated that the fundamental interaction of crossbridges with actin is that the crossbridge heads are mobile after attachment in the first case but not in the second. It is argued that because the weakly-binding crossbridge heads are mobile after attachment, the heads appear to function independently of each other. The lack of head mobility in attached strongly-binding crossbridges makes the strongly-binding crossbridge heads appear to act cooperatively. This model of the strongly-binding crossbridge gives an explanation for two important and otherwise unexplained observations. It explains why the rate constant of force decay after a small stretch is a sigmoidal function of nucleotide analogue concentration, and why, in the presence of analogues or in rigor, the rate constant of force decay after a small stretch is often significantly slower than the rate constant for myosin subfragment-1 detachment from actin in solution. The model of the weakly-binding crossbridge accurately describes the behavior of the myosin·ATP crossbridge.     

Myosin head configuration in relaxed insect flight muscle: x-ray modeled resting cross-bridges in a pre-powerstroke state are poised for actin binding

Low-angle x-ray diffraction patterns from relaxed insect flight muscle recorded on the BioCAT beamline at the Argonne APS have been modeled to 6.5 nm resolution (R-factor 9.7%, 65 reflections) using the known myosin head atomic coordinates, a hinge between the motor (catalytic) domain and the light chain-binding (neck) region (lever arm), together with a simulated annealing procedure. The best head conformation angles around the hinge gave a head shape that was close to that typical of relaxed M*ADP*Pi heads, a head shape never before demonstrated in intact muscle. The best packing constrained the eight heads per crown within a compact crown shelf projecting at approximately 90 degrees to the filament axis. The two heads of each myosin molecule assume nonequivalent positions, one head projecting outward while the other curves round the thick filament surface to nose against the proximal neck of the projecting head of the neighboring molecule. The projecting heads immediately suggest a possible cross-bridge cycle. The relaxed projecting head, oriented almost as needed for actin attachment, will attach, then release Pi followed by ADP, as the lever arm with a purely axial change in tilt drives approximately 10 nm of actin filament sliding on the way to the nucleotide-free limit of its working stroke. The overall arrangement appears well designed to support precision cycling for the myogenic oscillatory mode of contraction with its enhanced stretch-activation response used in flight by insects equipped with asynchronous fibrillar flight muscles.     

Electron microscopy and image analysis of myosin filaments from scallop striated muscle

Thick filaments have been isolated from the striated adductor muscle of the scallop and examined by electron microscopy after negative staining. Many filaments appear intact, and reveal a centrally located bare-zone and a well-defined helical surface array of myosin crossbridges characterized by a 145 A axial period and prominent helical tracks of pitch 480 A. Heavy-metal shadowing shows that these helices are right-handed. A small perturbation of alternate crossbridge levels produces an axial period of 290 A, which is most prominent in a region on either side of the bare-zone. Image analysis reveals that the crossbridge array has 7-fold rotational symmetry, one of the possibilities suggested by earlier X-ray diffraction studies of native filaments in scallop muscle. A low-resolution three-dimensional reconstruction shows elongated surface projections ("crossbridges") that probably represent unresolved pairs of myosin heads. They run almost parallel to the filament surface, but are slewed slightly from the axis so that they lie along the right-handed helical tracks of pitch 480 A. The connection to the filament backbone probably occurs at the end of the crossbridges nearer the bare-zone; thus, their sense of tilt appears to be opposite to that of rigor attachment to actin. The 290 A period arises from a different distribution of crossbridge density at alternate levels; in addition, there are weak connections between the top of one crossbridge and the bottom of the next, 145 A away. The prominence of the 290 A period near the bare-zone suggests that anti-parallel molecular interactions are mainly responsible for this perturbation.     

X-ray interference studies of crossbridge action in muscle contraction: evidence from quick releases

We have used a high-resolution small angle X-ray scattering system, together with a high-performance CCD camera, on the BioCAT beamline at the APS synchrotron radiation facility at the Argonne National Laboratory, to study X-ray interference effects in the meridional reflections generated by the arrays of myosin crossbridges in contracting muscle. These give information about axial movements of the myosin heads during contraction with sub-nanometer resolution. Using whole intact muscle preparations (frog sartorius) we have been able to record the detailed behavior of M3 (the first order meridional reflection from the myosin crossbridges, at 14.56 nm) at each of a number of quick releases of increasing magnitude, on the same specimen, and at the same time make similar measurements on higher order myosin meridional reflections, particularly M6. The latter provides information about the dispersion of lever arm angles of the actin-attached myosin heads. The observations show that in isometric contraction the lever arm angles are dispersed through +/- 20-25 degrees on either side of a mean orientation that is about 60 degrees away from their orientation at the end of the working stroke: and that they move towards that orientation in synchronized fashion, with constant dispersion, during quick releases. The relationship between the shift in the interference fringes (which measures the shift of the myosin heads scattering mass towards the center of the sarcomere, and the changes in the total intensity of the reflections, which measures the changes in the axial profile of the heads, is consistent with the tilting lever arm mechanism of muscle contraction. Significant fixed contributions to the meridional reflections come from unattached myosin heads and from backbone components of the myosin filaments, and the interaction of these with the contributions from actin-attached myosin heads determines the behavior of these reflections.     

Myosin molecule packing within the vertebrate skeletal muscle thick filaments. A complete bipolar model

Computer modelling related to the real dimensions of both the whole filament and the myosin molecule subfragments has revealed two alternative modes for myosin molecule packing which lead to the head disposition similar to that observed by EM on the surface of the cross-bridge zone of the relaxed vertebrate skeletal muscle thick filaments. One of the modes has been known for three decades and is usually incorporated into the so-called three-stranded model. The new mode differs from the former one in two aspects: (1) myosin heads are grouped into asymmetrical cross-bridge crowns instead of symmetrical ones; (2) not the whole myosin tail, but only a 43-nm C-terminus of each of them is straightened and near-parallel to the filament axis, the rest of the tail is twisted. Concurrent exploration of these alternative modes has revealed their influence on the filament features. The parameter values for the filament models as well as for the building units depicting the myosin molecule subfragments are verified by experimental data found in the literature. On the basis of the new mode for myosin molecule packing a complete bipolar structure of the thick filament is created.     

The myosin filament superlattice in the flight muscles of flies: A-band lattice optimisation for stretch-activation?

Low-angle X-ray diffraction patterns from relaxed fruitfly (Drosophila) flight muscle recorded on the BioCat beamline at the Argonne Advanced Photon Source (APS) show many features similar to such patterns from the "classic" insect flight muscle in Lethocerus, the giant water bug, but there is a characteristically different pattern of sampling of the myosin filament layer-lines, which indicates the presence of a superlattice of myosin filaments in the Drosophila A-band. We show from analysis of the structure factor for this lattice that the sampling pattern is exactly as expected if adjacent four-stranded myosin filaments, of repeat 116 nm, are axially shifted in the hexagonal A-band lattice by one-third of the 14.5 nm axial spacing between crowns of myosin heads. In addition, electron micrographs of Drosophila and other flies (e.g. the house fly (Musca) and the flesh fly (Sarcophaga)) combined with image processing confirm that the same A-band superlattice occurs in all of these flies; it may be a general property of the Diptera. The different A-band organisation in flies compared with Lethocerus, which operates at a much lower wing beat frequency (approximately 30 Hz) and requires a warm-up period, may be a way of optimising the myosin and actin filament geometry needed both for stretch activation at the higher wing beat frequencies (50 Hz to 1000 Hz) of flies and their need for a rapid escape response.