Cloning and expression of the Clostridium thermohydrosulfuricum alpha-amylase-pullulanase gene in Escherichia coli

An alpha-amylase-pullulanase gene from Clostridium thermohydrosulfuricum DSM 3783 was cloned in Escherichia coli on a 7.0 kb EcoRI fragment using a lambda vector. The gene produced, from an indigenous promoter, active thermostable alpha-amylase-pullulanase, seemingly mostly a soluble intracellular enzyme in E. coli. Gel filtration separated the active enzyme produced into three peaks, each having both alpha-amylase and pullulanase activities. Immunoblotting after SDS-PAGE revealed more than ten alpha-amylase-pullulanase specific polypeptides; the biggest of these had an Mr of about 165,000, whereas the smallest enzymically active polypeptide had an Mr of about 100,000. Despite the marked degeneration of its constituent polypeptides, the apparent temperature optimum of the enzyme (80-85 degrees C) was only some 5 degrees C lower and the heat stability the same as that of the extracellular alpha-amylase-pullulanase produced by the native host. Oligonucleotide probes prepared according to the NH2-terminal amino acid sequences of the enzyme and its satellite polypeptide (a polypeptide associated with the extracellular enzyme of the native host) hybridized to different regions of the 7.0 kb DNA insert.     

Expression, assembly, and processing of an active plant ferredoxin-NADP+ oxidoreductase and its precursor protein in Escherichia coli

The flavoprotein ferredoxin-NADP+ reductase (FNR) catalyzes the final step of the photosynthetic electron transport chain, i.e. the reduction of NADP+ by ferredoxin. A cloned FNR cDNA from a pea library (Newman, B., and Gray, J. (1988) Plant Mol. Biol. 10, 511-520) was used to construct plasmids which express the apoenzyme in Escherichia coli. Two recombinant vectors were prepared, one containing the sequence corresponding to the mature enzyme and another including, in addition, the sequence of the transit peptide that directs FNR to the chloroplast. These proteins were expressed as fusion products to the NH2-terminal portion of beta-galactosidase. In both cases, a 35-kDa immunoreactive polypeptide was the major product, suggesting that the proteins were processed in vivo. NH2-terminal sequence determination of the purified recombinant proteins indicate cleavage at positions -1/-2 with respect to the normal processing site in chloroplasts. The processed enzymes showed enzymatic activities and spectral properties that were similar or identical to those of native plant FNR. When a La protease-deficient E. coli strain was used as a host, the expressed FNR precursor was found to be poorly processed, associated to bacterial pellets, and showed no detectable FNR activity. The overall results indicate that acquisition of the native enzyme conformation and assembly of the prosthetic group takes place in the bacterial host, generating an enzyme that is, as far as studied, indistinguishable from plant FNR.     

Hydroperoxidase II of Escherichia coli exhibits enhanced resistance to proteolytic cleavage compared to other catalases

Catalase (hydroperoxidase) HPII of Escherichia coli is the largest catalase so far characterized, existing as a homotetramer of 84 kDa subunits. Each subunit has a core structure that closely resembles small subunit catalases, supplemented with an extended N-terminal sequence and compact flavodoxin-like C-terminal domain. Treatment of HPII with trypsin, chymotrypsin, or proteinase K, under conditions of limited digestion, resulted in cleavage of 72-74 residues from the N-terminus of each subunit that created a homotetramer of 76 kDa subunits with 80% of wild-type activity. Longer treatment with proteinase K removed the C-terminal domain, producing a transient 59 kDa subunit which was subsequently cleaved into two fragments, 26 and 32 kDa. The tetrameric structure was retained despite this fragmentation, with four intermediates being observed between the 336 kDa native form and the 236 kDa fully truncated form corresponding to tetramers with a decreasing complement of C-termini (4, 3, 2, and 1). The truncated tetramers retained 80% of wild-type activity. The T(m) for loss of activity during heating was decreased from 85 to 77 degrees C by removal of the N-terminal sequence and to 59 degrees C by removal of the C-terminal domain, revealing the importance of the C-terminal domain in enzyme stability. The sites of cleavage were determined by N- and C-terminal sequencing, and two were located on the surface of the tetramer with a third being exposed by removal of the C-terminal domain.     

Cloning and expression of peptide-N4-(N-acetyl-beta-D-glucosaminyl)asparagine amidase F in Escherichia coli

The peptide-N4-(N-acetyl-beta-D-glucosaminyl) asparagine amidase F (PNGase F) gene from Flavobacterium meningosepticum was cloned into a high copy number Escherichia coli plasmid. Levels of PNGase F activity produced in cultures of the recombinant strain were up to 100-fold higher than those obtained in cultures of F. meningosepticum. The complete PNGase F gene sequence was determined. Comparison of the predicted amino acid sequence of pre-PNGase F to the N-terminal sequence of the native mature enzyme indicates that the protein is synthesized with a 40-amino acid signal sequence that is removed during secretion in F. meningosepticum. The recombinant PNGase F produced in E. coli is a mixture of products comprised predominantly of two proteins with molecular masses of 36.3 and 36.6 kDa. These proteins have a higher apparent molecular mass than the 34.7-kDa native enzyme. N-terminal amino acid sequencing demonstrated that these higher molecular mass products result from cleavage of the pre-PNGase F in E. coli upstream of the native N terminus. The PNGase F gene was engineered to encode a preenzyme that was processed in E. coli to give an N terminus identical to that of the native enzyme. Purified preparations of this form of recombinant PNGase F were shown to be suitable for glycoprotein analyses since they possess no detectable endo-beta-N-acetylglucosaminidase F, exoglycosidase, or protease activity.     

Type I procollagen N-proteinase from whole chick embryos. Cleavage of a homotrimer of pro-alpha 1(I) chains and the requirement for procollagen with a triple-helical conformation

Procollagen N-proteinase, the enzyme which cleaves the NH2-terminal propeptides from type I procollagen, was purified over 15,000-fold from extracts of chick embryos by chromatography on columns of DEAE-cellulose, concanavalin A-agarose, heparin-agarose, pN-collagen-agarose, and a filtration gel. The purified enzyme had an apparent molecular weight of 320,000 as estimated by gel filtration and a pH optimum for activity of 7.4 to 9.0. The enzyme was inhibited by metal chelators and the thiol reagent dithiothreitol. Addition of calcium was required for maximal activity under the standard assay conditions, and the presence of calcium decreased thermal inactivation at 37 degrees C. The purified enzyme cleaved a homotrimer of pro-alpha 1(I) chains, an observation which indicated that the presence of pro-alpha 2(I) chain is not essential for the enzymic cleavage of NH2-terminal propeptides. Previous observations suggesting that the enzyme requires a substrate with a native conformation were explored further by reacting the enzyme with type I procollagen at different temperatures. Type I procollagen from chick embryo fibroblasts became resistant to cleavage at about 43 degrees C. Type I procollagen from human skin fibroblasts, which was previously shown to have a slightly lower thermal stability than chick embryo type I procollagen, became resistant to cleavage at temperatures that were about 2 degrees C lower. The results suggested that the enzyme is a sensitive probe for the three-dimensional structure of the NH2-terminal region of the procollagen molecule and that it requires the protein substrate to be triple helical.     

Cloning and over-expression in Escherichia coli of the gene encoding NADPH group III alcohol dehydrogenase from Thermococcus hydrothermalis. Characterization and comparison of the native and the recombinant enzymes.

A NADP-dependent group III alcohol dehydrogenase (ADH) was purified from the hyperthermophilic strictly anaerobic archaeon Thermococcus hydrothermalis, which grows at an optimum temperature of 85 degrees C and an optimum pH of 6. The gene encoding this enzyme was cloned, sequenced, and over-expressed in Escherichia coli. The recombinant enzyme was purified, characterized and compared with the native form of the enzyme. The enzyme structure is pH-dependent, being a 197-kDa tetramer (subunit of 45 kDa) at pH 10.5, the pH optimum for alcohol oxidation, and a 80.5-kDa dimer at pH 7.5, the pH optimum for aldehyde reduction. The kinetic parameters of the enzyme show that the affinity of the enzyme is greater for the aldehyde substrate and NADPH cofactor, suggesting that the dimeric form of the enzyme is probably the active form in vivo. The ADH of T. hydrothermalis oxidizes a series of primary aliphatic and aromatic alcohols preferentially from C2 to C8 but is also active towards methanol and glycerol and stereospecific for monoterpenes. T. hydrothermalis ADH is the first Thermococcale ADH to be cloned and overproduced in a mesophilic heterologous expression system, and the recombinant and the native forms have identical main characteristics.     

Unique precursor structure of an extracellular protease, aqualysin I, with NH2- and COOH-terminal pro-sequences and its processing in Escherichia coli

Aqualysin I is a subtilisin-type serine protease which is secreted into the culture medium by Thermus aquaticus YT-1, an extremely thermophilic Gram-negative bacterium. The nucleotide sequence of the entire gene for aqualysin I was determined, and the deduced amino acid sequence suggests that aqualysin I is produced as a large precursor, consisting of at least three portions, an NH2-terminal pre-pro-sequence (127 amino acid residues), the protease (281 residues), and a COOH-terminal pro-sequence (105 residues). When the cloned gene was expressed in Escherichia coli cells, aqualysin I was not secreted. However, a precursor of aqualysin I lacking the NH2-terminal pre-pro-sequence (38-kDa protein) accumulated in the membrane fraction. On treatment of the membrane fraction at 65 degrees C, enzymatically active aqualysin I (28-kDa protein) was produced in the soluble fraction. When the active site Ser residue was replaced with Ala, cells expressing the mutant gene accumulated a 48-kDa protein in the outer membrane fraction. The 48-kDa protein lacked the NH2-terminal 14 amino acid residues of the precursor, and heat treatment did not cause any subsequent processing of this precursor. These results indicate that the NH2-terminal signal sequence is cleaved off by a signal peptidase of E. coli, and that the NH2- and COOH-terminal pro-sequences are removed through the proteolytic activity of aqualysin I itself, in that order. These findings indicate a unique four-domain structure for the aqualysin I precursor; the signal sequence, the NH2-terminal pro-sequence, mature aqualysin I, and the COOH-terminal pro-sequence, from the NH2 to the COOH terminus.     

Subunit identity of the dimeric 17 beta-hydroxysteroid dehydrogenase from human placenta.

Human placental 17 beta-hydroxysteroid dehydrogenase has been purified with a new rapid procedure based on fast protein liquid chromatography, yielding quantitatively a homogeneous preparation with high specific activity catalyzing the oxidation of 7.2 mumol of estradiol/min/mg of enzyme protein at 23 degrees C, pH 9.2. This preparation was shown to have a subunit mass of 34.5 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis while having a molecular mass of 68 kDa by both Superose-12 gel-filtration and native pore gradient gel electrophoresis. When 17 beta-hydroxysteroid dehydrogenase was expressed in HeLa cells or overproduced in insect cells using the baculovirus expression system, both from its cDNA encoding a protein of 34 kDa, the enzyme had the same migration in native and sodium dodecyl sulfate-gel electrophoresis as the purified one from human placenta and eluted from the Superose-12 column at the same elution volume. Moreover, all the above forms of this enzyme have similar specific activity. These results clearly demonstrate the identity of the three enzyme forms. The enzyme produced from the cDNA is expressed as a dimer, and its two subunits are identical. 17 beta-Hydroxysteroid dehydrogenase subunit identity is thus proved. The NH2-terminal analysis revealed a unique sequence of Ala-Arg-Thr-Val-Val-Leu-Ile for the purified enzyme from placenta, further confirming the above conclusion.     

Purification and cloning of a thermostable xylose (glucose) isomerase with an acidic pH optimum from Thermoanaerobacterium strain JW/SL-YS 489.

An unusual xylose isomerase produced by Thermoanaerobacterium strain JW/SL-YS 489 was purified 28-fold to gel electrophoretic homogeneity, and the biochemical properties were determined. Its pH optimum distinguishes this enzyme from all other previously described xylose isomerases. The purified enzyme had maximal activity at pH 6.4 (60 degrees C) or pH 6.8 (80 degrees C) in a 30-min assay, an isoelectric point at 4.7, and an estimated native molecular mass of 200 kDa, with four identical subunits of 50 kDa. Like other xylose isomerases, this enzyme required Mn2+, Co2+, or Mg2+ for thermal stability (stable for 1 h at 82 degrees C in the absence of substrate) and isomerase activity, and it preferred xylose as a substrate. The gene encoding the xylose isomerase was cloned and expressed in Escherichia coli, and the complete nucleotide sequence was determined. Analysis of the sequence revealed an open reading frame of 1,317 bp that encoded a protein of 439 amino acid residues with a calculated molecular mass of 50 kDa. The biochemical properties of the cloned enzyme were the same as those of the native enzyme. Comparison of the deduced amino acid sequence with sequences of other xylose isomerases in the database showed that the enzyme had 98% homology with a xylose isomerase from a closely related bacterium, Thermoanaerobacterium saccharolyticum B6A-RI. In fact, only seven amino acid differences were detected between the two sequences, and the biochemical properties of the two enzymes, except for the pH optimum, are quite similar. Both enzymes had a temperature optimum at 80 degrees C, very similar isoelectric points (pH 4.7 for strain JW/SL-YS 489 and pH 4.8 for T. saccharolyticum B6A-RI), and slightly different thermostabilities (stable for 1 h at 80 and 85 degrees C, respectively). The obvious difference was the pH optimum (6.4 to 6.8 and 7.0 to 7.5, respectively). The fact that the pH optimum of the enzyme from strain JW/SL-YS 489 was the property that differed significantly from the T. saccharolyticum B6A-RI xylose isomerase suggested that one or more of the observed amino acid changes was responsible for this observed difference.     

Substrate requirements of hepatitis C virus serine proteinase for intermolecular polypeptide cleavage in Escherichia coli.

Using as substrates a series of chimeric proteins containing various fragments of the hepatitis C virus precursor polyprotein between Escherichia coli maltose binding protein and dihydrofolate reductase, we analyzed the substrate requirements of hepatitis C viral serine proteinase (Cpro-2) for intermolecular polypeptide cleavage in E. coli. Cpro-2-dependent substrate cleavage was observed in E. coli cells simultaneously transformed with expression plasmids for the Cpro-2 molecule and substrate protein. The cleavage sites were estimated by determining the amino (N)-terminal amino acid sequences of dihydrofolate reductase-fused processed products purified partially by affinity chromatography from the lysates, indicating that cleavage occurred at sites identical to those observed in eukaryotic cells. Mutation analysis using the chimeric substrate indicated that the presence of cysteine and small uncharged residues at positions P1 and P1', respectively, of the putative cleavage site is necessary for cleavage and that acidic residues in the region upstream of the cleavage site are required for efficient cleavage.     

Domain structure of the large subunit of Escherichia coli carbamoyl phosphate synthetase. Location of the binding site for the allosteric inhibitor UMP in the COOH-terminal domain

The large subunit of Escherichia coli carbamoyl phosphate synthetase (a polypeptide of 117.7 kDa that consists of two homologous halves) is responsible for carbamoyl phosphate synthesis from NH3 and for the binding of the allosteric activators ornithine and IMP and of the inhibitor UMP. Elastase, trypsin, and chymotrypsin inactivate the enzyme and cleave the large subunit at a site approximately 15 kDa from the COOH terminus (demonstrated by NH2-terminal sequencing). UMP, IMP, and ornithine prevent this cleavage and the inactivation. Upon irradiation with ultraviolet light in the presence of [14C]UMP, the large subunit is labeled selectively and specifically. The labeling is inhibited by ornithine and IMP. Cleavage of the 15-kDa COOH-terminal region by prior treatment of the enzyme with trypsin prevents the labeling on subsequent irradiation with [14C]UMP. The [14C]UMP-labeled large subunit is resistant to proteolytic cleavage, but if it is treated with SDS the resistance is lost, indicating that UMP is cross-linked to its binding site and that the protection is due to conformational factors. In the presence of SDS, the labeled large subunit is cleaved by trypsin or by V8 staphylococcal protease at a site located 15 or 25 kDa, respectively, from the COOH terminus (shown by NH2-terminal sequencing), and only the 15- or 25-kDa fragments are labeled. Similarly, upon cleavage of the aspartyl-prolyl bonds of the [14C]UMP-labeled enzyme with 70% formic acid, labeling was found only in the 18.5-kDa fragment that contains the COOH terminus of the subunit. Thus, UMP binds to the COOH-terminal domain.(ABSTRACT TRUNCATED AT 250 WORDS)     

Purification and partial characterization of 7,8-dihydro-6-hydroxymethylpterin-pyrophosphokinase and 7,8-dihydropteroate synthase from Escherichia coli MC4100.

The enzymes 7,8-dihydroxymethylpterin-pyrophosphokinase (HPPK) and 7,8-dihydropteroate synthase (DHPS), which act sequentially in the folate pathway, were purified to homogeneity from crude extracts of Escherichia coli MC4100. The enzymes represent less than 0.01% of the total soluble protein. HPPK was purified greater than 10,000-fold; the native enzyme appears to be a monomer with a molecular mass of 25 kDa and a pI of 5.2. DHPS was purified greater than 7,000-fold; the native enzyme has an apparent molecular mass of 52 to 54 kDa and is composed of two identical 30-kDa subunits. The amino-terminal sequences for both enzymes have been determined.     

Cloning and sequencing of a serine proteinase gene from a thermophilic Bacillus species and its expression in Escherichia coli.

The gene for a serine proteinase from a thermophilic Bacillus species was identified by PCR amplification, and the complete gene was cloned after identification and isolation of suitably sized restriction fragments from Southern blots by using the PCR product as a probe. Two additional, distinct PCR products, which were shown to have been derived from other serine proteinase genes present in the thermophilic Bacillus species, were also obtained. Sequence analysis showed an open reading frame of 1,206 bp, coding for a polypeptide of 401 amino acids. The polypeptide was determined to be an extracellular serine proteinase with a signal sequence and prosequence. The mature proteinase possessed homology to the subtilisin-like serine proteinases from a number of Bacillus species and had 61% homology to thermitase, a serine proteinase from Thermoactinomyces vulgaris. The gene was expressed in Escherichia coli in the expression vector pJLA602 and as a fusion with the alpha-peptide of the lacZ gene in the cloning vector pGEM5. A recombinant proteinase from the lacZ fusion plasmid was used to determine some characteristics of the enzyme, which showed a pH optimum of 8.5, a temperature optimum of 75 degrees C, and thermostabilities ranging from a half-life of 12.2 min at 90 degrees C to a half-life of 40.3 h at 75 degrees C. The enzyme was bound to a bacitracin column, and this method provided a simple, one-step method for producing the proteinase, purified to near homogeneity.     

Limited proteolysis of branching enzyme from Escherichia coli

Branching enzyme is involved in determining the structure of starch and glycogen. It catalyzes the formation of branch points by cleavage and transfer of alpha-1,4-glucan chains to alpha-1,6 branch points. Branching enzyme belongs to the amylolytic family of enzymes containing four conserved regions in a central (alpha/beta)8-barrel. Limited proteolysis of the branching enzyme from Escherichia coli (84 kDa) by proteinase K produced a truncated protein of 70-kDa, which still retained 40-60% of branching activity, depending on the type of assay used. Amino acid sequencing showed that the 70-kDa protein lacked 111 or 113 residues at the amino terminal, whereas the carboxy terminal was still intact. We purified this truncated enzyme to homogeneity and analyzed its properties. The enzyme had a three- to fourfold lower catalytic efficiency than the native enzyme, whereas the substrate specificity was unaltered. Furthermore, a branching enzyme with 112 residues deleted at the amino terminal was constructed by recombinant technology and found to have properties identical to those of the proteolyzed enzyme.     

Cloning of the Bacillus subtilis glutamine phosphoribosylpyrophosphate amidotransferase gene in Escherichia coli. Nucleotide sequence determination and properties of the plasmid-encoded enzyme

The Bacillus subtilis gene encoding glutamine phosphoribosylpyrophosphate amidotransferase (amidophosphoribosyltransferase) was cloned in pBR322. This gene is designated purF by analogy with the corresponding gene in Escherichia coli. B. subtilis purF was expressed in E. coli from a plasmid promoter. The plasmid-encoded enzyme was functional in vivo and complemented an E. coli purF mutant strain. The nucleotide sequence of a 1651-base pair B. subtilis DNA fragment was determined, thus localizing the 1428-base pair structural gene. A primary translation product of 476 amino acid residues was deduced from the DNA sequence. Comparison with the previously determined NH2-terminal amino acid sequence indicates that 11 residues are proteolytically removed from the NH2 terminus, leaving a protein chain of 465 residues having an NH2-terminal active site cysteine residue. Plasmid-encoded B. subtilis amidophosphoribosyltransferase was purified from E. coli cells and compared to the enzymes from B. subtilis and E. coli. The plasmid-encoded enzyme was similar in properties to amidophosphoribosyltransferase obtained from B. subtilis. Enzyme specific activity, immunological reactivity, in vitro lability to O2, Fe-S content, and NH2-terminal processing were virtually identical with amidophosphoribosyltransferase purified from B. subtilis. Thus E. coli correctly processed the NH2 terminus and assembled [4Fe-4S] centers in B. subtilis amidophosphoribosyltransferase although it does not perform these maturation steps on its own enzyme. Amino acid sequence comparison indicates that the B. subtilis and E. coli enzymes are homologous. Catalytic and regulatory domains were tentatively identified based on comparison with E. coli amidophosphoribosyltransferase and other phosphoribosyltransferase (Argos, P., Hanei, M., Wilson, J., and Kelley, W. (1983) J. Biol. Chem. 258, 6450-6457).     

Methionyl-tRNA synthetase from Bacillus stearothermophilus: structural and functional identities with the Escherichia coli enzyme.

The metS gene encoding homodimeric methionyl-tRNA synthetase from Bacillus stearothermophilus has been cloned and a 2880 base pair sequence solved. Comparison of the deduced enzyme protomer sequence (Mr 74,355) with that of the E. coli methionyl-tRNA synthetase protomer (Mr 76,124) revealed a relatively low level (32%) of identities, although both enzymes have very similar biochemical properties (Kalogerakos, T., Dessen, P., Fayat, G. and Blanquet, S. (1980) Biochemistry 19, 3712-3723). However, all the sequence patterns whose functional significance have been probed in the case of the E. coli enzyme are found in the thermostable enzyme sequence. In particular, a stretch of 16 amino acids corresponding to the CAU anticodon binding site in the E. coli synthetase structure is highly conserved in the metS sequence. The metS product could be expressed in E. coli and purified. It showed structure-function relationships identical to those of the enzyme extracted from B. stearothermophilus cells. In particular, the patterns of mild proteolysis were the same. Subtilisin converted the native dimer into a fully active monomeric species (62 kDa), while trypsin digestion yielded an inactive form because of an additional cleavage of the 62 kDa polypeptide into two subfragments capable however of remaining firmly associated. The subtilisin cleavage site was mapped on the enzyme polypeptide, and a gene encoding the active monomer was constructed and expressed in E. coli. Finally, trypsin attack was demonstrated to cleave a peptidic bond within the KMSKS sequence common to E. coli and B. stearothermophilus methionyl-tRNA synthetases. This sequence has been shown, in the case of the E. coli enzyme, to have an essential role for the catalysis of methionyl-adenylate formation.     

Characterization and autoprocessing of precursor and mature forms of human immunodeficiency virus type 1 (HIV 1) protease purified from Escherichia coli

A recombinant plasmid encompassing the human immunodeficiency virus type 1 (HIV 1) protease coding sequence and flanking regions (Ala-13 to Gly-185 of the pol open reading frame) has been expressed in two distinct strains of Escherichia coli, AR58 and AR68. In the first strain, AR58, the primary translation product, a 25 kilodalton (kDa) precursor protein, is short-lived and rapidly processes itself to the 11 kDa mature protease in vivo. In the second strain, AR68, the 25 kDa species is only partially processed, and it, a 13 kDa intermediate, and the mature 11 kDa enzyme accumulate at a ratio of 3:4.5:2.5, respectively. The 11 kDa mature protease from AR58 and the 25 kDa precursor from AR68 have been purified to homogeneity. The yield of 11 kDa enzyme from AR58 is approximately 0.02 mg/g wet weight of E. coli cell pellet. The protease has both the expected NH2- and COOH-terminal sequences. The yield of 25 kDa enzyme from AR68 is approximately 0.1 mg/g wet weight of E. coli cell pellet. In vitro, the 25 kDa precursor enzyme rapidly (t1/2 approximately equal to 9 min) processes itself into a species with a mass of approximately 13 kDa and a species with a mass of approximately 11 kDa. Both of these latter species can be separated by RP-HPLC, have the NH2-terminal sequence expected for the mature protease, and are active. The 11 kDa enzyme from AR58 comigrates with the 11 kDa enzyme from AR68 on RP-HPLC and SDS polyacrylamide gel electrophoresis. On extended incubation at 4 degrees C at either neutral or acidic pH all species of the protein exhibit further autodegradation at defined sequences. The availability of the mature, 11 kDa enzyme and the 25 kDa precursor will allow biochemical and physical studies on this critical viral enzyme.     

Isolation and characterization of a heat-stable pullulanase from the hyperthermophilic archaeon Pyrococcus woesei after cloning and expression of its gene in Escherichia coli.

The gene encoding an extremely heat-stable pullulanase from the hyperthermophilic archaeon Pyrococcus woesei was cloned and expressed in Escherichia coli. Purification of the enzyme to homogeneity was achieved after heat treatment of the recombinant E. coli cells, affinity chromatography on a maltotriose-coupled Sepharose 6B column, and anion-exchange chromatography on Mono Q. The pullulanase, which was purified 90-fold with a final yield of 15%, is composed of a single polypeptide chain with a molecular mass of 90 kDa. The enzyme is optimally active at 100 degrees C and pH 6.0 and shows 40% activity at 120 degrees C. Enzyme activation up to 370% is achieved in the presence of calcium ions and reducing agents such as beta-mercaptoethanol and dithiothreitol, whereas N-bromosuccinimide and alpha-cyclodextrin are inhibitory. The high rigidity of the heat-stable enzyme is demonstrated by fluorescence spectroscopic studies in the presence of denaturing agents such as sodium dodecyl sulfate. At temperatures above 80 degrees C, the enzyme seems to switch from the compact to the unfolded form, which is accompanied by an apparent shift in the molecular mass from 45 to 90 kDa.