Use of Hantzsch reaction for quantitation of milnacipran as a magic treatment for fibromyalgia syndrome in human plasma and urine

A new fluorimetric procedure is described for analysis of milnacipran in its bulk, tablet dosage forms, as well as in biological human samples such as plasma and urine. The suggested method relies on the construction of a derivative with strong fluorescence called dihydropyridine derivative. This derivative resulted from the interaction of the primary amino group in the studied drug and acetylacetone/formaldehyde in McIlvaine buffer (pH 5). The fluorescent dihydropyridine derivative was measured at 470 nm. Influences of experimental variables namely pH, reagent concentration and temperature were examined and optimized. The calibration curve showed linearity over the range of 0.15–1.25 μg ml^?1 of milnacipran with an R² value of 0.9998. The detection limit was 0.02 μg ml^?1 and the determination limit was 0.07 μg ml^?1. The developed procedure was successfully used in the assay of the studied drug in Avermilan® tablets with excellent selectivity. In addition, the reaction was applied to estimate the drug in spiked human plasma and urine with mean percentage recoveries of 100.04 ± 1.61 and 99.78 ± 0.81% for urine and plasma, respectively.     

Validated spectrofluorimetric method for determination of two phosphodiesterase inhibitors tadalafil and vardenafil in pharmaceutical preparations and spiked human plasma

A valid, sensitive and rapid spectrofluorimetric method has been developed and validated for determination of both tadalafil (TAD) and vardenafil (VAR) either in their pure form, in their tablet dosage forms or spiked in human plasma. This method is based on measurement of the native fluorescence of both drugs in acetonitrile at λ_em 330 and 470 nm after excitation at 280 and 275 nm for tadalafil and vardenafil, respectively. Linear relationships were obtained over the concentration range 4–40 and 10–250 ng/mL with a minimum detection of 1 and 3 ng/mL for tadalafil and vardenafil, respectively. Various experimental parameters affecting the fluorescence intensity were carefully studied and optimized. The developed method was applied successfully for the determination of tadalafil and vardenafil in bulk drugs and tablet dosage forms. Moreover, the high sensitivity of the proposed method permitted their determination in spiked human plasma. The developed method was validated in terms of specificity, linearity, lower limit of quantification (LOQ), lower limit of detection (LOD), precision and accuracy. The mean recoveries of the analytes in pharmaceutical preparations were in agreement with those obtained from the comparison methods, as revealed by statistical analysis of the obtained results using Student's t‐test and the variance ratio F‐test. Copyright © 2015 John Wiley & Sons, Ltd.     

New spectrofluorimetric analysis of dapagliflozin after derivatization with NBD‐Cl in human plasma using factorial design experiments

A new validated spectrofluorimetric method was proposed for dapagliflozin (DGF) analysis in bulk, plexin its commercially available tablets and in spiked human plasma. The proposed spectrofluorimetric method depended on the formation of a fluorescent complex soluble in organic liquids by a substitution reaction between 4‐chloro‐7‐nitrobenzo‐2‐oxa‐1,3‐diazole (NBD‐Cl) reagent and DGF in aqueous buffered solution at pH 7. The fluorescence intensity was measured at 522 nm after excitation at 453 nm. The high selectivity of the proposed method allowed analysis of DGF in dosage form and human plasma samples with average recovery values of 99.84 ± 1.38% and 98.71 ± 1.80%, respectively, without any interference from matrix components. The calibration range was 50–1000 ng ml^?1. The limit of detection (LOD) and limit of quantitation (LOQ) were 14.24 ng ml^?1 and 43.14 ng ml^?1, respectively. The estimated relative standard deviation values were lower than 2.0%, this showed the excellent precision at both levels. Factorial design was used to get the optimum method conditions for the analysis of the resulting DGF fluorescence complex in different matrices. The proposed method could be used in routine analysis of DGF in quality control laboratories. Also, it could be used to assay DGF in human plasma and be applied for pharmacokinetic investigation of DGF.     

Green micelle and complex inclusion enhance synchronous spectrofluorimetric quantification of a novel analgesic combination: Tramadol and celecoxib in tablet dosage form and spiked human plasma

This work offers for the first time an optimized, highly sensitive, simple, and accurate synchronized spectrofluorimetric technique for the simultaneous measurement of tramadol and celecoxib in powder form, their combined multimodal tablet, and finally spiked human plasma samples. Tramadol and celecoxib were recently released as a new drug combination to alleviate intense, sudden pain when other pain medications had failed. The technique entailed taking measurements of the fluorescence amplitudes of the synchronized spectra at Δλ = 100 nm. Excitation was made at 220 nm and 264 nm, whereas the emission points were 282 nm and 368 nm for tramadol and celecoxib, respectively. This technique offers linearity of 40–400 ng/ml and 100–2000 ng/ml for tramadol and celecoxib, respectively. Complex formation between the cited medications with the surfactant sodium dodecyl sulphate enhanced the fluorescence intensity and other control parameters. Tramadol and celecoxib were both determined in spiked human plasma using the current technique with marked percentage recoveries of 98.63 ± 6.30% and 99.32 ± 6.67%, respectively. Last, the research was extended to check the greenness profile of the finally optimized method and the results revealed excellent eco-friendliness. Three greenness assessment tools were used including Eco-scale, the Green Analytical Procedure Index tool, and the AGREE calculator. Sustainable development, economic feasibility, and environmental soundness were all considered throughout the development of the present technique. The approach was validated in accordance with the requirements provided by the International Council for Harmonization.     

Development of sensitive spectrofluorimetric and spectrophotometric methods for the determination of duloxetine in capsule and spiked human plasma

A new, sensitive and selective spectrofluorimetric method has been developed for the determination of duloxetine (DLX) in capsule and spiked human plasma. DLX, as a secondary amine compound, reacts with 7‐chloro‐4‐nitrobenzofurazon (NBD‐Cl), a highly sensitive fluorogenic and chromogenic reagent used in many investigations. The method is based on the reaction between the drug and NBD‐Cl in borate buffer at pH 8.5 to yield a highly fluorescent derivative that is measured at 523 nm after excitation at 478 nm. The fluorescence intensity was directly proportional to the concentration over the range 50–250 ng/mL. The reaction product was also measured spectrophotometrically. The relation between the absorbance at 478 nm and the concentration is rectilinear over the range 1.0–12.0 µg/mL. The methods were successfully applied for the determination of this drug in pharmaceutical dosage form. The spectrofluorimetric method was also successfully applied to the determination of duloxetine in spiked human plasma. The suggested procedures could be used for the determination of DLX in pure form, capsules and human plasma being sensitive, simple and selective. Copyright © 2014 John Wiley & Sons, Ltd.     

Spectrofluorimetric determination of eptifibatide in human plasma and dosage form

A spectrofluorimetric method for the determination of eptifibatide is presented based on its native fluorescence. The type of solvent and the wavelength of maximum excitation and emission were carefully selected to optimize the experimental conditions. Under the specified experimental conditions, the linearities obtained between the emission intensity and the corresponding concentrations of eptifibatide were in the range 0.1–2.5 μg/ml for the calibration curve constructed for direct determination of eptifibatide in dosage form and 0.05–2.2 μg/ml for the calibration curve constructed in spiked human plasma with a good correlation coefficient (r > 0.99). The lower limit of quantification for the calibration curve constructed in human plasma was 0.05 μg/ml. Recovery results for eptifibatide in spiked plasma samples and in dosage form, represented as mean ± % RSD, were 95.17 ± 1.94 and 100.29 ± 1.33 respectively. The suggested procedures were validated according to the International Conference on Harmonization (ICH) guidelines for the direct determination of eptifibatide in its pure form and dosage form and United States Food and Drug Administration (US FDA) Guidance for Industry, Bioanalytical Method Validation for the assay of eptifibatide in human plasma.     

Application of 2-halopyridinium salts as ultraviolet derivatization reagents and solid-phase extraction for determination of captopril in human plasma by high-performance liquid chromatography

A high-performance liquid chromatographic method was developed for the determination of captopril in human plasma. 1-Benzyl-2-chloropyridinium bromide (BCPB) was used as a precolumn derivatizing reagent. The mercapto group of captopril was arylated by the reagent to generate a stable UV-sensitive product. The derivative was solid-phase extracted (SPE), separated on a C₁₈ column using reversed-phase ion-paring chromatography and monitored by a spectrophotometric detector at 314 nm. The method enabled sensitive determination of captopril and its disulphides in human plasma in patients after oral administration. Disulphides of captopril with captopril itself and with endogenous thiol compounds are reduced with triphenylphosphine to form captopril, followed by derivatization with the same reagent. The quantification limit was 10 ng/ml. Calibration curves were prepared for human plasma samples spiked with captopril and captopril disulphide. The calibration curves were linear in the range of 10 to 500 ng/ml for captopril and 10 to 1000 ng/ml for captopril disulphide.     

Microenvironment improvement protocol for the sensitive spectrofluorimetric determination of an hepatitis C virus antiviral (Simeprevir): application to human plasma

Simeprevir (SPV) is a powerful antihepatitis C virus agent that was newly introduced into the pharmaceutical market. We here established and validated an easy, simple, and sensitive spectrofluorimetric method for its estimation at λ_em 427 nm (λ_ex 337 nm). The suggested procedure was based on two times enhancement in the original emission of SPV through modifying its microenvironment in buffered aqueous solution by adding Triton X‐100. The relationship between the concentration of SPV and the observed fluorescence intensity was linear in the range 0.06–1.0 μg ml^?1 with a correlation coefficient of 0.9997. The limits of detection and quantitation were 21 and 64 ng ml^?1, respectively. The present method was effectively applied to quantify SPV content in pharmaceutical tablets and human plasma spiked with the drug with no interference from tablet excipients or plasma components.     

Spectrofluorimetric determination of oseltamivir phosphate through derivatization with o‐phthalaldehyde. Application to pharmaceutical preparations with a preliminary study on spiked plasma samples

A simple and sensitive spectrofluorimetric method has been developed and validated for the determination of oseltamivir phosphate (OST) in pharmaceutical preparations. The method is based on the reaction between oseltamivir phosphate and o‐phthalaldehyde in presence of 2‐mercapto‐ethanol in borate buffer, pH 10.8, to give a highly fluorescent product measured at 450 nm after excitation at 336 nm. The different experimental parameters affecting the development and stability of the reaction product were studied and optimized. The fluorescence intensity–concentration plot is rectilinear over the range 0.05–1.0 µg/mL, with a lower detection limit of 5 ng/mL and limit of quantitation of 16 ng/mL. The developed method was successfully applied to the analysis of the drug in its commercial capsules and suspension, mean recoveries of OST were 99.97 ± 1.67% and 100.17 ± 1.18%, respectively (n = 3). Statistical comparison of the results obtained by the proposed and comparison method revealed no significant difference in the performance of the two methods regarding accuracy and precision. The proposed method was further extended to in vitro determination of the studied drug in spiked human plasma as a preliminary investigation; the mean recovery (n = 3) was 98.68 ± 5.8%. A reaction pathway was postulated. Copyright © 2012 John Wiley & Sons, Ltd.     

Isoquinoline-based intrinsic fluorescence assessment of erythropoiesis-stimulating agent,Roxadustat (FG-4592), in tablets: applications to content uniformity and human plasma evaluation

In the present study, a first validated and green spectrofluorimetric approach for its assessment and evaluation in different matrices was investigated. After using an excitation wavelength of 345 nm, Roxadustat (ROX) demonstrates a highly native fluorescence at an emission of 410 nm. The influences of experimental factors such as pH, diluting solvents, and different organized media were tested, and the most appropriate solvent choice was ethanol. It was confirmed that there was a linear relationship between the concentration of ROX and the relative fluorescence intensity in the range 60.0–1000.0 ng ml^−1, with the limit of detection and limit of quantitation, respectively, being 17.0 and 53.0 ng ml⁻¹. The mean recoveries % [±standard deviation (SD), n = 5] for pharmaceutical preparations were 100.11% ± 2.24%, whereas for plasma samples, they were 100.08 ± 1.08% (±SD, n = 5). The results obtained after the application of four greenness criteria, Analytical Eco-Scale metric, NEMI, GAPI, and AGREE metric, confirmed its eco-friendliness. In addition, the whiteness meter (RGB12) confirmed its level of sustainability. The International Council for Harmonisation (ICH) criteria were used to verify the developed method through the study in both spiked plasma samples and content uniformity evaluation. An appropriate standard for various applications in industry and quality control laboratories was developed.     

Applicability of fluorescamine as a fluorogenic reagent for highly sensitive fluorimetric analysis of the tyrosine kinase inhibitor (avapritinib) in pharmaceuticals and biological samples

Avapritinib (AVP) was the first precision drug to be approved by the US Food and Drug Administration (FDA) in 2020 for patients suffering from metastatic gastrointestinal stromal tumors (GISTs) and progressive systemic mastocytosis. The analysis of AVP in pharmaceutical tablets and human plasma was then carried out using a fast, efficient, sensitive, and simple fluorimetric method using a fluorescamine reagent. The procedure is based on the interaction between fluorescamine as a fluorogenic reagent and the primary aliphatic amine moiety in AVP using borate buffer solution at pH 8.8. The produced fluorescence was measured at 465 nm (Excitation at 395 nm). The calibration graph's linearity range was discovered to be 45.00–500.0 ng mL⁻¹. Utilizing the International Council for Harmonization (ICH) and US-FDA recommendations, the research technique was validated and bioanalytically validated. The proposed approach was effectively employed for determining the stated pharmaceuticals in plasma with a high percentage of recovery ranging from 96.87 to 98.09 and pharmaceutical formulations with a percentage of recovery equal to 102.11% ± 1.05%. In addition, the study was extended to a pharmacokinetic study of AVP with 20 human volunteers as a step for AVP management in therapeutic cancer centers.     

Utility of Von Pechman synthesis of coumarin reaction for development of spectrofluorimetric method for quantitation of salmeterol xinafoate in pharmaceutical preparations and human plasma

Simple, precise and selective spectrofluorimetric technique was evolved for quantitation of selective β₂ agonist drug namely salmeterol xinafoate (SAL). Utilizing its phenolic nature, a method was described based on the reaction of the studied drug with ethyl acetoacetate (EAA) to yield extremely fluorescent coumarin product which can be detected at 480 nm (λ_ex = 420 nm). The procedure obeys Beer's law with a correlation coefficient of r = 0.9999 in the concentration range between 500 and 5000 ng ml^?1 with and 177 ng ml^?1 for limit of detection (LOD) and limit of quantification (LOQ), respectively. Diverse reaction variables influencing the firmness and formation of the coumarin product were accurately examined and modified to ensure greatest sensitivity of the procedure. The proposed technique was performed and examined according to the US Food and Drug Administration (FDA) guidelines for bio‐analytical methods and was efficiently applied for quantitation of SAL in both pharmaceutical preparations (% recovery = 100.06 ± 1.07) and spiked human plasma (% recovery = 96.64–97.14 ± 1.01–1.52).     

Enhanced spectrofluorimetric determination of esomeprazole and pantoprazole in dosage forms and spiked human plasma using organized media

A simple, sensitive and rapid spectrofluorimetric method was developed for the determination of esomeprazole (EMZ) and pantoprazole (PRZ) in their pharmaceutical formulations and human plasma. The proposed method is based on the fluorescence spectral behavior of EMZ in methanol in the presence of 0.1 m NaOH containing 0.5% methyl cellulose (MC) at 306/345 nm. The fluorescence intensity of EMZ was enhanced about 1.3‐fold and good linearity in the range 0.4–4.0 µg/mL with a lower detection limit of 0.04 µg/mL and lower quantification limit of 0.14 µg/mL. For PRZ, its methanolic solution exhibited marked native fluorescence at 290/325 nm after enhancement (about 2.1‐ or 1.4‐fold) using either 0.025% sodium dodecyl sulfate (SDS) or 0.05% MC in the presence of 0.2 m borate buffer of pH 9.5. The fluorescence–concentration plots of PRZ were rectilinear over the ranges 0.2–2.0 and 0.3–3.0 µg/mL with lower detection limits of 0.02 and 0.03 µg/mL and lower quantification limits of 0.07 and 0.09 µg/mL using sodium dodecyl sulfate and MC, respectively. The method was successfully applied to the analysis of EMZ and PRZ in their commercial dosage forms and the results were in good agreement with those obtained with the comparison method. Furthermore, in a preliminary investigation, the proposed method was extended to the in vitro determination of the two drugs in spiked human plasma and the results were satisfactory. Copyright © 2014 John Wiley & Sons, Ltd.     

Spectrofluorimetric method for the determination of sulpiride in pharmaceutical preparations and human plasma through derivatization with 2‐cyanoacetamide

A sensitive and accurate spectrofluorimetric method has been developed for the determination of sulpiride in pharmaceutical preparations and human plasma. The developed method is based on the derivatization reaction of 2‐cyanoacetamide with sulpiride in 30% ammonical solution. The fluorescent derivatized reaction product exhibited maximum fluorescence intensity at 379 nm after excitation at 330 nm. The optimum conditions for derivatization reactions were studied and the fluorescence intensity versus concentration plot was found to be linear over the concentration range 0.2–20.0 µg/mL with a correlation coefficient of 0.9985. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.82 and 2.73 ng/mL, respectively. The proposed method was validated according to ICH guidelines. The effects of common excipients and co‐administered drugs were also studied. The accuracy of the method was checked using the standard addition method and percent recoveries were found to be in the range of 99.00–101.25% for pharmaceutical preparations and 97.00–97.80% for spiked human plasma. The method was successfully applied to commercial formulations and the results obtained for the proposed method were compared with a high‐performance liquid chromatography reference method and statistically evaluated using the Student's t‐test for accuracy and the variance ratio F‐test for precision. A reaction pathway was also proposed. Copyright © 2012 John Wiley & Sons, Ltd.     

Development and validation of a spectrofluorimetric method for the quantification of ceftriaxone in pharmaceutical formulations and plasma

We describe the development and validation of a new, simple, sensitive and cost‐effective method for the determination of ceftriaxone in commercial formulations and spiked human plasma. The method proposes the conversion of ceftriaxone into a fluorescent product by reacting with ortho‐phthalaldehyde (OPA) in the presence of sulfite at room temperature. The reaction medium is buffered to pH 10 using borate buffer. The derivatized reaction product is highly fluorescent and exhibits maximum fluorescence intensity at λ_em = 386 nm after excitation at λ_ex = 324 nm. The experimental parameters affecting progress of the derivatization reaction were carefully studied and optimized. Under optimum experimental conditions, the method has an excellent correlation coefficient of 0.9984 with a broad linear range of 0.4?20 µg/mL. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 1.30 × 10^?3 and 3.90 × 10^?3 µg/mL, respectively. The interference effects of common excipients on the quantification of drug were investigated and no interference effect was observed. The proposed method has been successfully applied to the determination of ceftriaxone in pharmaceutical formulations and spiked human plasma samples. The method has been validated statistically through percent recovery studies using standard addition and by comparison with a reference HPLC method. The developed method exhibits excellent inter‐ and intraday precision. Copyright © 2013 John Wiley & Sons, Ltd.     

First derivative synchronous spectrofluorimetric method for the simultaneous determination of propofol and cisatracurium besylate in biological fluids

Propofol and cisatracurium besylate have been simultaneously determined using a highly sensitive first derivative synchronous spectrofluorometric method. The method is based on measuring first derivative synchronous spectrofluorimetric amplitude at Δλ = 40 nm with a scanning rate of 600 nm/min. The different experimental parameters affecting the fluorescence intensity of the two drugs were carefully studied and optimized. The amplitude–concentration plots were rectilinear over the range 40.0–400.0 ng/mL and 20.0–280.0 ng/mL for propofol and cisatracurium, respectively with lower detection limits of 4.0 and 2.35 ng/mL and quantification limits of 12.1 and 7.1 ng/mL for propofol and cisatracurium, respectively. The proposed method was successfully applied for the determination of the two compounds in synthetic mixtures and in commercial ampoules. The high sensitivity attained using the proposed method allowed the simultaneous determination of both drugs in spiked plasma samples. The mean % recoveries in spiked human plasma (n = 3) were 96.53 ± 0.90 and 96.20 ± 1.64 for each of propofol and cisatracurium, respectively. The method was validated in compliance with International Council of Harmonization (ICH) Guidelines.     

Utility of green chemistry for sustainable fluorescence derivatization approach for spectrofluorimetric quantification of Darolutamide as antineoplastic drug in pharmaceutical formulation and spiked human plasma

Darolutamide is an oral nonsteroidal androgen receptor antagonist used to delay the process of prostate cancer to metastatic disease and to increase the quality of life for people with advanced prostate cancer. Here, a second spectrofluorimetric method was advanced for quantifying Darolutamide in pharmaceutical formulation and spiked human plasma. This method depends on the fluorescence derivatization of Darolutamide with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) at 75°C in a (pH 9) of borate buffer to produce a fluorescent derivative that can be detected at 520 nm after excitation at 460 nm. The method has been validated using ICH criteria, and it demonstrated linearity in the range 5–200 ng ml⁻¹_. The limit of detection (LOD) and limit of quantitation (LOQ) were 1.15 and 3.84 nm, respectively. The proposed method was applied precisely and accurately for quantifying Darolutamide within the pharmaceutical formulation and spiking human plasma without any interferences. Moreover, the method's sustainability was evaluated and compared with the published method using two greenness assessment tools termed analytical eco-scale and Analytical GREEnness (AGREE). These findings suggest that the method is more sustainable than the published method.     

A novel spectrofluorimetric method for determination of lomefloxacin adopting on zinc(II) chelation strategy: Application in human plasma

A new sensitive and instantaneous spectrofluorimetric method for efficient determination of lomefloxacin (LMX) in its pure, dosage form and human plasma was designed. The developed method depends on formation of a metal-chelation compound of LMX as a ligand with zinc(II) in a buffer of acetate (pH 5.5). The following parameters; type of metal, concentration of metal, pH, type of buffer and diluting solvent were optimized. After carefully investigation; 0.2 mM zinc, 2.0 ml acetate buffer (pH 5.5) and water as diluting solvent were set as optimum reaction conditions. Under these conditions, a large increase in the intensity of the fluorescence of LMX was attained at 450 after excitation at 284 nm. The limits of detection and quantification were 5.8 and 1.9 ng ml⁻¹, respectively, with linearity range of 10.0 to 500.0 ng ml⁻¹. The binding mode of LMX and zinc(II) ion (Zn²⁺) was found to be 2:1, respectively, and confirmed by Job's plot method. Furthermore, it extended to the analysis of LMX in the spiked plasma of humans with percentage recovery (98.70 ± 0.97 to 100.30 ± 1.69%, n = 3).     

Determination of amlodipine using terbium‐sensitized luminescence in the presence of europium(III) as a co‐luminescence reagent

A sensitive time‐resolved luminescence method for the determination of amlodipine (AM) in methanol and in aqueous solution is described. The method is based on the luminescence sensitization of terbium (Tb³⁺) by formation of a ternary complex with AM in the presence of tri‐n‐octylphosphine oxide (TOPO) as co‐ligand, dodecylbenzenesulfate as surfactant and europium ion as a co‐luminescence reagent. The signal for Tb–AM–TOPO is monitored at λ_ex = 242 nm and λ_em = 550 nm. Optimum conditions for the formation of the complex in aqueous system were 0.015 m Tris (hydroxylmethyl) amino methane buffer, pH 9.0, TOPO (1.0 × 10^–4 m ), Eu³⁺ (2.0 × 10^–7 m ), dodecylbenzenesulfate (0.14%) and 6.0 × 10^–5 m of Tb³⁺, which allows the determination of 10–50 ppb of AM with a limit of detection of 1.2 ppb. The relative standard deviations of the method range between 0.1 and 0.2% indicated excellent reproducibility of the method. The proposed method was successfully applied for the assay of AM in pharmaceutical formulations and in plasma samples. Average recoveries of 98.5 ± 0.2% and 95.2 ± 0.2% were obtained for AM in tablet and plasma samples respectively. Copyright © 2013 John Wiley & Sons, Ltd.