Improved photoluminescence stability and defect passivation in SbBr3 post-treated CsPbBr3 quantum dots under ambient conditions

Inorganic cesium lead halide perovskites have evoked wide popularity because of their excellent optoelectronic properties, high photoluminescence (PL) quantum yield (PLQY), and narrowband emission. Here, cesium lead bromide (CsPbBr₃) quantum dots (QDs) were synthesized via the ligand-assisted re-precipitation method. Post-synthesis treatment of CsPbBr₃ QDs using antimony tribromide improved the PL stability and optoelectronic properties of the QDs. In addition, the PLQY of the post-treated sample was enhanced to 91% via post-treatment, and the luminescence observed was maintained for 8 days. The post-synthesis treatment ensured defect passivation and improved the stability of CsPbBr₃ perovskite QDs. High-resolution transmission electron microscopy revealed the presence of more ordered, uniform-sized CsPbBr₃ QDs after post-synthesis treatment, and the uniformity of the sample improved as the day passed. The formation of a mixed crystal phase was observed from X-ray diffraction in both as-synthesized, as well as post-treated QDs samples with the possibility of a polycrystalline nature in the post-treated CsPbBr₃ QDs as per the selected area electron diffraction pattern. The X-ray photoelectron spectroscopy spectra confirmed the presence of antimony and the possibility of defect passivation in the post-treated samples. These QDs can act as potential candidates in various optoelectronic applications such as photodetectors and light-emitting diodes due to their high PLQY and longer lifetime.     

Ultra-stable perovskite quantum dot composites encapsulated with mesoporous SiO2 and PbBr(OH) for white light-emitting diodes

Lead halide perovskite quantum dots (QDs) with high fluorescence efficiency and high color purity have a broad application prospect in the field of backlight display, but poor stability has been a key factor limiting their commercialization. Herein, we successfully synthesized CsPbBr₃ QDs-KIT-6 (CsPbBr₃-K6) composite by using KIT-6 molecular sieve as the limited template with a simple high temperature solid-phase method. Further, the semi-protected CsPbBr₃ QDs in KIT-6 frame will spontaneously hydrolyze when encountering water, and finally the double-encapsulated CsPbBr₃ QDs-KIT-6@PbBr(OH) (CsPbBr₃-K6@PbBr(OH)) composite are obtained. CsPbBr₃-K6@PbBr(OH) composite shows excellent green emission properties, including a photoluminescence quantum yield (PLQY) (~73%) and a narrow emission linewidth of 25 nm. It is interesting that, the composite has excellent stability, including water stability without attenuation of fluorescence intensity after soaking in water for 60 days, thermal stability of 120°C heating–cooling cycle, and excellent optical stability without attenuation under continuous ultraviolet irradiation.     

Quantum dots – a versatile tool in plant science?

An optically stable, novel class of fluorophores (quantum dots) for in situ hybridisation analysis was tested to investigate their signal stability and intensity in plant chromosome analyses. Detection of hybridisation sites in situ was based on fluorescence from streptavidin-linked inorganic crystals of cadmium selenide. Comparison of quantum dots (QDs) with conventional detection systems (Alexa 488) in immunolabeling experiments demonstrated greater sensitivity than the conventional system. In contrast, detection of QDs in in situ hybridisation of several plant chromosomes, using several high-copy sequences, was less sensitve than Alexa 488. Thus, semiconductor nanocrystal fluorophores are more suitable for immunostaining but not for in situ hybridisation of plant chromosomes.     

Patterned Immobilization of Antibodies within Roll-to-Roll Hot Embossed Polymeric Microfluidic Channels

This paper describes a method for the patterned immobilization of capture antibodies into a microfluidic platform fabricated by roll-to-roll (R2R) hot embossing on poly (methyl methacrylate) (PMMA). Covalent attachment of antibodies was achieved by two sequential inkjet printing steps. First, a polyethyleneimine (PEI) layer was deposited onto oxygen plasma activated PMMA foil and further cross-linked with glutaraldehyde (GA) to provide an amine-reactive aldehyde surface (PEI-GA). This step was followed by a second deposition of antibody by overprinting on the PEI-GA patterned PMMA foil. The PEI polymer ink was first formulated to ensure stable drop formation in inkjet printing and the printed films were characterized using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). Anti-CRP antibody was patterned on PMMA foil by the developed method and bonded permanently with R2R hot embossed PMMA microchannels by solvent bonding lamination. The functionality of the immobilized antibody inside the microfluidic channel was evaluated by fluorescence-based sandwich immunoassay for detection of C-reactive protein (CRP). The antibody-antigen assay exhibited a good level of linearity over the range of 10 ng/ml to 500 ng/ml (R² = 0.991) with a calculated detection limit of 5.2 ng/ml. The developed patterning method is straightforward, rapid and provides a versatile approach for creating multiple protein patterns in a single microfluidic channel for multiplexed immunoassays.     

Photoluminescence properties of hybrid SiO2‐coated CdTe/CdSe quantum dots

Hybrid SiO₂‐coated CdTe/CdSe quantum dots (QDs) were prepared using CdTe/CdSe QDs prepared by hydrothermal synthesis. A CdSe interlayer made CdTe/CdSe cores with unique type II heterostructures. The hybrid SiO₂‐coated CdTe/CdSe QDs revealed excellent photoluminescence (PL) properties compared with hybrid SiO₂‐coated CdTe QDs. Because of the existence of spatial separations of carriers in the type II CdTe/CdSe core/shell QDs, the hybrid QDs had a relatively extended PL lifetime and high stability in phosphate‐buffered saline buffer solutions. This is ascribed to the unique components and stable surface state of hybrid SiO₂‐coated CdTe/CdSe QDs. During the stabilization test in phosphate‐buffered saline buffer solutions, both static and dynamic quenching occurred. The quenching mechanism of the hybrid QDs was not suited with the Stern–Volmer equation. However, the relative stable surface of CdTe/CdSe QDs resulted in lower degradation and relative high PL quantum yields compared with hybrid SiO₂‐coated CdTe QDs. As a result, hybrid SiO₂‐coated CdTe/CdSe QDs can be used in bioapplications. Copyright © 2013 John Wiley & Sons, Ltd.     

Application of inkjet printing technique for biological material delivery and antimicrobial assays

A modified commercial inkjet printer was developed to deliver biological samples. The active Escherichia coli cells were directly printed at precisely targeted positions on agar-coated substrates via this technique to generate complex bacterial colony patterns. Viable cell arrays with a high density of 400 dots/cm² were obtained without the addition of any surfactants or other chemicals. Moreover, an applicable example of multiple-layer inkjet printing technique was adapted to deposit bacteria and antibiotics for antimicrobial potential assays. After fluorescent E. coli cells were printed, gradient concentrations of water-soluble antibiotics were ejected onto them to determine its minimum inhibitory concentration (MIC) to test the antimicrobial activities. This approach simplifies the experimental manipulation by replacing laborious manual loading processes with automatically controlled printing procedures, which makes it a versatile tool for high-throughput applications.     

Creating Transient Cell Membrane Pores Using a Standard Inkjet Printer

Bioprinting has a wide range of applications and significance, including tissue engineering, direct cell application therapies, and biosensor microfabrication.^1-10 Recently, thermal inkjet printing has also been used for gene transfection.^8,9 The thermal inkjet printing process was shown to temporarily disrupt the cell membranes without affecting cell viability. The transient pores in the membrane can be used to introduce molecules, which would otherwise be too large to pass through the membrane, into the cell cytoplasm.^8,9,11The application being demonstrated here is the use of thermal inkjet printing for the incorporation of fluorescently labeled g-actin monomers into cells. The advantage of using thermal ink-jet printing to inject molecules into cells is that the technique is relatively benign to cells.^{8, 12} Cell viability after printing has been shown to be similar to standard cell plating methods^1,8. In addition, inkjet printing can process thousands of cells in minutes, which is much faster than manual microinjection. The pores created by printing have been shown to close within about two hours. However, there is a limit to the size of the pore created (~10 nm) with this printing technique, which limits the technique to injecting cells with small proteins and/or particles. ^8,9,11A standard HP DeskJet 500 printer was modified to allow for cell printing.^{3, 5, 8} The cover of the printer was removed and the paper feed mechanism was bypassed using a mechanical lever. A stage was created to allow for placement of microscope slides and coverslips directly under the print head. Ink cartridges were opened, the ink was removed and they were cleaned prior to use with cells. The printing pattern was created using standard drawing software, which then controlled the printer through a simple print command. 3T3 fibroblasts were grown to confluence, trypsinized, and then resuspended into phosphate buffered saline with soluble fluorescently labeled g-actin monomers. The cell suspension was pipetted into the ink cartridge and lines of cells were printed onto glass microscope cover slips. The live cells were imaged using fluorescence microscopy and actin was found throughout the cytoplasm. Incorporation of fluorescent actin into the cell allows for imaging of short-time cytoskeletal dynamics and is useful for a wide range of applications.^13-15     

CdTe1‐xSex/Cd0.5Zn0.5S core/shell quantum dots: core composition and property

Alloy CdTe_1‐xSe_x quantum dots (QDs) have been fabricated by an organic route using Cd, Te and Se precursors in a mixture of trioctylamine and octadecylphosphonic acid at 280 °C. The variation of photoluminescence (PL) peak wavelength of the CdTe_1‐xSe_x QDs compared with CdTe QDs confirmed the formation of an alloy structure. The Se component drastically affected the stability of CdTe_1‐xSe_x QDs. A Cd_0.5Zn_0.5S shell coating on CdTe_1‐xSe_x cores was carried out using oleic acid as a capping agent. CdTe_1‐xSe_x/Cd_0.5Zn_0.5S core/shell QDs revealed dark red PL while a yellow PL peak was observed for the CdTe_1‐xSe_x cores. The PL efficiency of the core/shell QDs was drastically increased (less than 1% for the cores and up to 65% for the core/shell QDs). The stability of QDs in various buffer solutions was investigated. Core/shell QDs can be used for biological applications because of their high stability, tunable PL and high PL efficiency. Copyright © 2013 John Wiley & Sons, Ltd.     

Colorimetry as Quality Control Tool for Individual Inkjet-Printed Pediatric Formulations

Printing technologies were recently introduced to the pharmaceutical field for manufacturing of drug delivery systems. Printing allows on demand manufacturing of flexible pharmaceutical doses in a personalized manner, which is critical for a successful and safe treatment of patient populations with specific needs, such as children and the elderly, and patients facing multimorbidity. Printing of pharmaceuticals as technique generates new demands on the quality control procedures. For example, rapid quality control is needed as the printing can be done on demand and at the point of care. This study evaluated the potential use of a handheld colorimetry device for quality control of printed doses of vitamin Bs on edible rice and sugar substrates. The structural features of the substrates with and without ink were also compared. A multicomponent ink formulation with vitamin B₁, B₂, B₃, and B₆ was developed. Doses (4 cm²) were prepared by applying 1–10 layers of yellow ink onto the white substrates using thermal inkjet technology. The colorimetric method was seen to be viable in detecting doses up to the 5th and 6th printed layers until color saturation of the yellow color parameter (b*) was observed on the substrates. Liquid chromatography mass spectrometry was used as a reference method for the colorimetry measurements plotted against the number of printed layers. It was concluded that colorimetry could be used as a quality control tool for detection of different doses. However, optimization of the color addition needs to be done to avoid color saturation within the planned dose interval.     

3D Printable Ceramic–Polymer Electrolytes for Flexible High‐Performance Li‐Ion Batteries with Enhanced Thermal Stability

This study establishes an approach to 3D print Li‐ion battery electrolytes with controlled porosity using a dry phase inversion method. This ink formulation utilizes poly(vinyldene fluoride) in a mixture of N‐methyl‐2‐pyrrolidone (good solvent) and glycerol (weak nonsolvent) to generate porosity during a simple drying step. When a nanosized Al₂O₃ filler is included in the ink, uniform sub‐micrometer pore formation is attained. In other words, no additional processing steps such as coagulation baths, stretching, or etching are required for full functionality of the electrolyte, which makes it a viable candidate to enable completely additively manufactured Li‐ion batteries. Compared to commercial polyolefin separators, these electrolytes demonstrate comparable high rate electrochemical performance (e.g., 5 C), but possess better wetting characteristics and enhanced thermal stability. Additionally, this dry phase inversion method can be extended to printable composite electrodes, yielding enhanced flexibility and electrochemical performance over electrodes prepared with only good solvent. Finally, sequentially printing this electrolyte ink over a composite electrode via a direct write extrusion technique has been demonstrated while maintaining expected functionality in both layers. These ink formulations are an enabling step toward completely printed batteries and can allow direct integration of a flexible power source in restricted device areas or on nonplanar surfaces.     

Bright solid‐state luminescence of green‐red tunable CdTe@BaCO3 composite: Synthesis and properties

Realizing efficient solid‐state luminescence is of great important to expand quantum dots (QDs) application fields. This work reports the preparation of CdTe@BaCO₃ composite by a one‐pot precipitation method. Both steady‐state PL and PL decay characteristics in either solid‐state or colloid solution show no obvious difference, mainly benefited from the effective protection of BaCO₃ on QDs from the external environment. By utilizing green and red CdTe QDs as dual‐color emission centers, precise emitting‐color control from green (0.312, 0.667) to red (0.691, 0.292) could be achieved in CdTe@BaCO₃ composite by adjusting volume ratio of CdTe solution precursor. Our results demonstrate that this composite material shows bright solid‐state luminescence and facile adjustment of the emitting color in QDs‐based composite is feasible, which could offer new path to design color‐tunable luminescent materials for future optoelectronic applications.     

Comprehensive study of interaction between biocompatible PEG‐InP/ZnS QDs and bovine serum albumin

Polyethylene glycol (PEG) surface modified biocompatible InP/ZnS quantum dots (QDs) act as a potential alternative for conventional carcinogenic cadmium‐based quantum dots for in vivo and in vitro studies. Comprehensively, we studied the interaction between a model protein bovine serum albumin (BSA) and PEGylated toxic free InP/ZnS QDs using various spectroscopic tools such as absorption, fluorescence quenching, time resolved and synchronous fluorescence spectroscopic measurements. These studies principally show that tryptophan (Trp) residues of BSA have preferable binding affinity towards PEG‐InP/ZnS QDs surface and a blue shift in Trp fluorescence emission is a signature of conformational changes in its hydrophobic microenvironment. Photoluminescence (PL) intensity of Trp is quenched by ground state complex formation (static quenching) at room temperature. However, InP/ZnS@BSA conjugates become unstable with increasing temperature and PL intensity of Trp is quenched via dynamic quenching by PEG‐InP/ZnS QDs. Experimentally determined thermodynamic parameters for these conjugates have shown spontaneity, entropy driven and exothermic nature of bio‐conjugation. The calculated binding affinity (n ? 1, Hill coefficient) suggest that the affinity of InP/ZnS QDs for a BSA protein is not dependent on whether or not other BSA proteins are already bound to the QD surface. Energy transfer efficiency (E), Trp residue to InP/ZnS QDs distances and energy transfer rate (k_T) were all obtained from FÖrster resonance energy.     

Photoluminescence of Alq3‐ and Tb‐activated aluminium–tris(8‐hydroxyquinoline) complex for blue chip‐excited OLEDs

The tris(8‐hydroxyquinoline)–aluminium complex is the most important and widely studied as electron transporting and green light emitting material. Alq₃ and Tb_xAl_(1‐x)q₃ have been synthesized (where x = 0.1, 0.3, 0.5, 0.7 and 0.9) and blended films of Alq₃ and Tb_xAl_(1‐x)q₃ with PMMA and PS at different percentage weight (wt%) concentrations (e.g., 0.1, 1, 5, 10, 25 and 50 wt%) have been prepared. The synthesized materials and their blended thin films have been characterized by a photoluminescence (PL) technique; the synthesis and PL characterization are reported in this paper. The synthesized metal complex shows bright emission of green light with blue light excitation (440 nm) and the prepared Tb_xAl_(1‐x)q₃ phosphor may be applicable in blue chip‐excited OLEDs for the newly developed wallpaper lighting technology. Copyright © 2012 John Wiley & Sons, Ltd.     

A sensitive fluorescent nanosensor for chloramphenicol based on molecularly imprinted polymer‐capped CdTe quantum dots

A novel fluorescent nanosensor using molecularly imprinted silica nanospheres embedded CdTe quantum dots (CdTe@SiO₂@MIP) was developed for detection and quantification of chloramphenicol (CAP). The imprinted sensor was prepared by synthesis of molecularly imprinting polymer (MIP) on the hydrophilic CdTe quantum dots via reverse microemulsion method using small amounts of solvents. The resulting CdTe@SiO₂@MIP nanoparticles were characterized by fluorescence, UV–vis absorption and FT‐IR spectroscopy and transmission electron microscopy. They preserved 48% of fluorescence quantum yield of the parent quantum dots. CAP remarkably quenched the fluorescence of prepared CdTe@SiO₂@MIP, probably via electron transfer mechanism. Under the optimal conditions, the relative fluorescence intensity of CdTe@SiO₂@MIP decreased with increasing CAP by a Stern–Volmer type equation in the concentration range of 40–500 µg L^–1. The corresponding detection limit was 5.0 µg L^–1. The intra‐day and inter‐day values for the precision of the proposed method were all <4%. The developed sensor had a good selectivity and was applied to determine CAP in spiked human and bovine serum and milk samples with satisfactory results. Copyright © 2015 John Wiley & Sons, Ltd.     

Instant formation of molecularly imprinted poly(ethylene-co-vinyl alcohol)/quantum dot composite nanoparticles and their use in one-pot urinalysis

The high stability of quantum dots (QDots) with photoluminescence has led to their increased use as imaging approaches in biological systems to replace conventional fluorescence labels. The antibodies are generally coated on the surface of QDots to the targeting site, and molecular imprinting polymers are designed to mimic the antibodies. Hence, quantum dots can be incorporated into molecularly imprinted polymers, which provide shape and selectivity, and then respond to template rebinding by emitting quenched photoluminescence. In this study, poly(ethylene-co-ethylene alcohol) creatinine-, albumin- and lysozyme-imprinted polymers nanoparticles are synthesized via phase inversion of poly(ethylene-co-ethylene alcohol) with various ethylene mole ratios when target molecules and hydrophobic quantum dots are mixed within the polymer solution. Finally, those particles were prepared for the detection of creatinine, human serum albumin and lysozyme in real sample (urine) and compared with commercial ARCHITECT ci 8200 system.     

Planar and Three-Dimensional Printing of Conductive Inks

Printed electronics rely on low-cost, large-area fabrication routes to create flexible or multidimensional electronic, optoelectronic, and biomedical devices^1-3. In this paper, we focus on one- (1D), two- (2D), and three-dimensional (3D) printing of conductive metallic inks in the form of flexible, stretchable, and spanning microelectrodes.Direct-write assembly^4,5 is a 1-to-3D printing technique that enables the fabrication of features ranging from simple lines to complex structures by the deposition of concentrated inks through fine nozzles (~0.1 - 250 μm). This printing method consists of a computer-controlled 3-axis translation stage, an ink reservoir and nozzle, and 10x telescopic lens for visualization. Unlike inkjet printing, a droplet-based process, direct-write assembly involves the extrusion of ink filaments either in- or out-of-plane. The printed filaments typically conform to the nozzle size. Hence, microscale features (< 1 μm) can be patterned and assembled into larger arrays and multidimensional architectures.In this paper, we first synthesize a highly concentrated silver nanoparticle ink for planar and 3D printing via direct-write assembly. Next, a standard protocol for printing microelectrodes in multidimensional motifs is demonstrated. Finally, applications of printed microelectrodes for electrically small antennas, solar cells, and light-emitting diodes are highlighted.     

Spontaneous emission of semiconductor quantum dots in inverse opal SiO2 photonic crystals at different temperatures

The photoluminescence (PL) characteristics of CdSe quantum dots (QDs) infiltrated into inverse opal SiO₂ photonic crystals (PCs) are systemically studied. The special porous structure of inverse opal PCs enhanced the thermal exchange rate between the CdSe QDs and their surrounding environment. Finally, inverse opal SiO₂ PCs suppressed the nonlinear PL enhancement of CdSe QDs in PCs excited by a continuum laser and effectively modulated the PL characteristics of CdSe QDs in PCs at high temperatures in comparison with that of CdSe QDs out of PCs. The final results are of benefit in further understanding the role of inverse opal PCs on the PL characteristics of QDs. Copyright © 2015 John Wiley & Sons, Ltd.     

Paper mill sludge-based carbon quantum dots as a specifically ratiometric fluorescent probe for the sensitive and selective detection of coptisine

Coptisine (COP), one of the bioactive components in Rhizoma Coptidis, has many pharmacological effects. Meanwhile, the determination of COP is essential in pharmacological and clinical applications. Herein, we prepared carbon quantum dots (CQDs) by one-step oil-thermal method using paper mill sludge (PMS) as precursor, and developed a ratiometric fluorescence method for the determination of COP. The structural and optical properties of PMS-CQDs were evaluated through high-resolution transmission electron microscopy (HRTEM), Fourier-transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), ultraviolet-visible (UV-vis), fluorescence, zeta potential and fluorescence lifetime experiments. Fluorescence intensity ratio at 550 nm and 425 nm (I₅₅₀/I₄₂₅) was recorded as an index for quantitative detection of COP. The detection concentration of COP ranges from 0.1 to 50 μM in good linear correlation (R² = 0.9974) with a limit of detection of 0.028 μM (3σ/k). The quenching mechanism was deduced to be inner filter effect and static quenching. The ratiometric fluorescent probe showed impressive selectivity and sensitivity towards COP, and was successfully applied to the detection of COP in human urine with expected recoveries (95.22–111.00%) and relative standard deviations (0.46–2.95%), indicating that our developed method has a great application prospect in actual sample detection.     

Turning waste into wealth: nitrogen-doped carbon quantum dots derived from fruits wastes for sensing

Hydrothermal treatment of m-phenylenediamine and grape seed powder has been adopted to synthesize nitrogen-doped carbon quantum dots (N-CQDs). The prepared N-CQDs possessed outstanding optical properties and high quantum yield. Based on the combined effect of static quenching effect and inner filter effect of permanganate (MnO₄⁻) to N-CQDs and the redox reaction that occurred between MnO₄⁻ and l -ascorbic acid (l -AA), an ‘off–on’ fluorescence strategy with N-CQDs has been proposed for the detection of MnO₄⁻ and l -AA. The proposed fluorescent probe was fast, sensitive and selective to MnO₄⁻ and l -AA under mild conditions. In addition, the satisfactory results of the proposed strategy for the detection of MnO₄⁻ and l -AA in real samples indicated its practicability.