Microbial medium chainlength poly[(R)-3-hydroxyalkanoate] shows liquid crystal behaviour

Medium chainlength (mcl) polyhydroxyalkanoates (PHAs) are a class of polymers receiving attention because of their potential as renewable, biodegradable and high tech properties. Unlike most short chain PHAs, mcl-PHAs are low crystallinity and elastomeric in character. In this paper we wish to point out that in their broad properties mcl-PHAs might be classified as thermotropic liquid crystals with dynamic conformational disorder and long range orientational order. As the characterization of mcl-PHAs progresses, their similarities to liquid crystalline elastomers are noteworthy. Wunderlich coined the acronym CONDIS from the words "conformational disorder" to categorize this type of liquid crystal. Thermal analysis reveals a T(g) of -40 to -45°C with several T(m) peaks. The chemistry of the elastomer from (13)C NMR confirms the poly(3-hydroxynonanoate), PHN, composition of the starting material along with two other samples containing double bonds: PHNU-18 and PHNU-31 where the numeral stands for the percent of double bonds.     

Synthesis and characterization of poly(3-hydroxyalkanoates) from Brassica carinata oil with high content of erucic acid and from very long chain fatty acids

Pseudomonas aeruginosa produced medium chain length poly(3-hydroxyalkanoates) (mcl-PHAs) when grown on substrates containing very long chain fatty acids (VLCFA, C>20). Looking for low cost carbon sources, we tested Brassica carinata oil (erucic acid content 35-48%) as an intact triglyceride containing VLCFA. Oleic (C18:1), erucic (C22:1), and nervonic (C24:1) acids were also employed for mcl-PHA production as model substrates. The polymers obtained were analyzed by GC of methanolyzed samples, GPC, 1H and 13C NMR, ESI MS of partially pyrolyzed samples, and DSC. The repeating units of such polymers were saturated and unsaturated, with a higher content of the latter in the case of the PHA obtained from B. carinata oil. Statistical analysis of the ion intensity in the ESI mass spectra showed that the PHAs from pure fatty acids are random copolymers, while the PHA from B. carinata oil is either a pure polymer or a mixture of polymers. Weight-average molecular weight varied from ca. 56,000 g/mol for the PHA from B. carinata oil and oleic acid, to about 120,000 g/mol for those from erucic and nervonic acids. The PHAs from erucic and nervonic acids were partially crystalline, with rubbery characteristics and a melting point (Tm) of 50°C, while the PHAs from oleic acid and from B. carinata oil afforded totally amorphous materials, with glass transition temperatures (Tg) of -52°C and -47°C, respectively.     

微生物合成中链聚羟基烷酸酯研究进展

某些微生物细胞在特定营养限制的条件下会产生聚羟基烷酸酯作为碳源储备。和短链聚羟基烷酸酯(PHB)一样 ,中链聚羟基烷酸酯由于具有更优良的性能、更高的附加值和更广泛的用途而受到人们的关注 ;此外 ,中链聚羟基烷酸酯还可以被人工合成为具有功能性侧链的半合成高聚物 ,并因此能够具有更好的弹性和更理想的结晶性能等优点 ,从而成为近年来对环境友好的生物可降解材料的研究重点。在能够合成中链聚羟基烷酸酯的微生物中 ,食油假单胞菌是最典型 ,也是研究得最多的一种。本文对由食油假单胞菌合成中链聚羟基烷酸酯的特点、代谢机制、发挥过程等内容进行了综述 ,并提出了这一研究领域未来可能的研究方向     

Conformational Disorder Enhances Solubility and Photovoltaic Performance of a Thiophene–Quinoxaline Copolymer

The side‐chain architecture of alternating copolymers based on thiophene and quinoxaline (TQ) is found to strongly influence the solubility and photovoltaic performance. In particular, TQ polymers with different linear or branched alkyloxy‐phenyl side chains on the quinoxaline unit are compared. Attaching the linear alkyloxy side‐chain segment at the meta‐ instead of the para‐position of the phenyl ring reduces the planarity of the backbone as well as the ability to order. However, the delocalisation across the backbone is not affected, which permits the design of high‐performance TQ polymers that do not aggregate in solution. The use of branched meta‐(2‐ethylhexyl)oxy‐phenyl side‐chains results in a TQ polymer with an intermediate degree of order. The reduced tendency for aggregation of TQ polymers with linear meta‐alkyloxy‐phenyl persists in the solid state. As a result, it is possible to avoid the decrease in charge‐transfer state energy that is observed for bulk‐heterojunction blends of more ordered TQ polymers and fullerenes. The associated gain in open‐circuit voltage of disordered TQ:fullerene solar cells, accompanied by a higher short‐circuit current density, leads to a higher power conversion efficiency overall. Thus, in contrast to other donor polymers, for TQ polymers there is no need to compromise between solubility and photovoltaic performance.     

Bacterial synthesis of polyhydroxyalkanoates containing aromatic and aliphatic monomers by Pseudomonas putida CA-3

Pseudomonas putida CA-3 has the ability to accumulate to high levels unique polyhydroxyalkanoate (PHA) heteropolymers composed of aromatic and aliphatic monomers. The majority of monomers are aromatic making up 98% of the polymer. (R)-3-hydroxyphenylvalerate and (R)-3-hydroxyphenylhexanoate are the most abundant monomers found in polymers accumulated from phenylalkanoic acids with an uneven and even number of carbons on the acyl side chain respectively. PHAs accumulated from phenylvaleric and phenylhexanoic acid were partially crystalline while all other PHAs were amorphous. Significant differences in the yield and PHA content of the cells occurred when different phenylalkanoic acids were supplied as growth substrates. Increasing the initial concentration of the growth substrate increased both the PHA content of the cells and the overall yield (g PHA/g carbon supplied) of PHA accumulated by P. putida CA-3 cells. The highest PHA content (% cell dry wt.) from an aromatic carbon source was 59% when 15mM phenylvaleric acid was supplied as the sole source of carbon and energy. This corresponded to a maximum PHA yield of 0.42 g PHA/g carbon supplied. In and attempt to increase the level of PHA accumulated from related growth substrates acrylic acid was added to the growth medium. However, the addition of various concentrations of acrylic acid to the growth medium had either no effect or decreased the PHA content of the cell accumulated from phenylalkanoic acids by P. putida CA-3.     

Polyhydroxyalkanoates: Properties and chemical modification approaches for their functionalization

Polyhydroxyalkanoates (PHAs) have become an attractive biomaterial in research in the past few years due to their extensive potential industrial applications. Being long chain hydroxyl fatty acid molecules, the PHAs are hydrophobic in nature, and have less functional groups. These features limit their applications in various areas. To enhance their usage, these polymers may need to be modified including surface and chemical modifications. Such modifications may alter their mechanical properties, surface structure, amphiphilic character and rate of degradation to fulfil the requirements for their future applications. Chemical modifications allow incorporation of functional groups to PHAs that could not be introduced through biotechnological methods. These chemically reformed PHAs, with enhanced properties, could be used for broad range of applications. This review aims to introduce different chemical modification approaches including some recent methods that had not been explored or discussed so far for PHAs as possible technologies for widening the range of product and application potentials. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:29–41, 2018     

The biodegradation of poly-3-hydroxyalkanoates,PHAs, with long alkyl substitutents byPseudomonas maculicola

Utilizing a quantitative clear zone technique, the activity of an extracellular depolymerase system fromPseudomonas maculicola was investigated. Polymer degradation was influenced by the amount and availability of secondary carbon sources, with a simultaneous utilization of both sources. The initial carbon source in the liquid preculture also affected the eventual colony growth and polymer degradation. The enzyme solution was determined to readily degrade poly-3-hydroxyalkanoates (PHAs) with relatively long alkyl substituents at the 3 position: poly-3-hydroxyoctanoate (PHO), poly-3-hydroxynonanoate (PHN), and their copolymers (P[HO-co-HN]) and poly-3-hydroxyundecanoate (PHU). However, the system was unable to degrade either PHAs with shorter alkyl groups, including poly-3-hydroxybutyrate (PHB) and the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P[HB-co-HV]) or PHAs with unusual substituents such as poly(3-hydroxy-5-phenylvaleric acid) (PHPV). It is proposed that degradation of these more bulky side chain polymers was prevented by the inability of the bacteria to assimilate their monomeric components, which inhibited the successful utilization of secondary carbon sources and thus inhibited colony growth.     

Bacterial polyhydroxyalkanoates

Polyhydroxyalkanoates (PHAs) are polyesters of hydroxyalkanoates (HAs) synthesized by numerous bacteria as intracellular carbon and energy storage compounds and accumulated as granules in the cytoplasm of cells. More than 80 HAs have been detected as constituents of PHAs, which allows these thermoplastic materials to have various mechanical properties resembling hard crystalline polymer or elastic rubber depending on the incorporated monomer units. Even though PHAs have been recognized as good candidates for biodegradable plastics, their high price compared with conventional plastics has limited their use in a wide range of applications. A number of bacteria including Alcaligenes eutrophus, Alcaligenes latus, Azotobacter vinelandii, methylotrophs, pseudomonads, and recombinant Escherichia coli have been employed for the production of PHAs, and the productivity of greater than 2 g PHA/L/h has been achieved. Recent advances in understanding metabolism, molecular biology, and genetics of the PHA-synthesizing bacteria and cloning of more than 20 different PHA biosynthesis genes allowed construction of various recombinant strains that were able to synthesize polyesters having different monomer units and/or to accumulate much more polymers. Also, genetically engineered plants harboring the bacterial PHA biosynthesis genes are being developed for the economical production of PHAs. Improvements in fermentation/separation technology and the development of bacterial strains or plants that more efficiently synthesize PHAs will bring the costs down to make PHAs competitive with the conventional plastics. (c) 1996 John Wiley & Sons, Inc.     

Thermoluminescence characteristics of calcite with a Gaussian process regression model of machine learning

Thermoluminescence (TL) is defined as a luminescence phenomenon that can be detected when an insulator or semiconductor is thermally stimulated. Defective crystals store radiation until they are stimulated. Thermoluminescence is a method of monitoring the absorbed dose of dosimeters. The irradiation crystal is heated to 500°C to display the absorbed dose as a luminescent light. The TL dosimetric properties of calcite obtained from nature were investigated in this study. Machine learning was also examined using Gaussian process regression (GPR) for stimulated TL characteristics. According to the experimental output, the TL glow curve had two main peaks located at 90°C and 240°C with good dosimetric properties. In the four regression models of GPR, the data for the heating rate of 3°C s⁻¹ have the lowest residual.     

Preparation of a novel artificial bacterial polyester modified with pendant hydroxyl groups

The Poly(hydroxyalkanoate) (PHA) chemical modifications represent an alternative route to introduce functional groups, which cannot be introduced by bioconversion. PHAs containing unsaturated chains were readily converted into polyesters containing a terminal hydroxyl group on the side chains. With the use of the borane-tetrahydrofuran complex, the pendant side chain alkenes were quantitatively transformed into hydroxyl functions. The conversion proceeded to completion without a significant decrease in molecular weight. The introduction of hydroxyl groups in the products was confirmed from Fourier transform infrared and 1H NMR analysis. The presence of repeating units containing pendant hydroxyl groups in the proportion 25 mol % caused an increase in hydrophilicity of these new PHAs because they were soluble in polar solvents such as ethanol. Besides, these reactive PHAs can be used to bind bio-active molecules or to prepare novel graft copolymers with desired properties.     

Biosynthetic polyesters consisting of 2-hydroxyalkanoic acids: current challenges and unresolved questions

2-Hydroxyalkanoates (2HAs) have become the new monomeric constituents of bacterial polyhydroxyalkanoates (PHAs). PHAs containing 2HA monomers, lactate (LA), glycolate (GL), and 2-hydroxybutyrate (2HB) can be synthesized by engineered microbes in which the broad substrate specificities of PHA synthase and propionyl-CoA transferase are critical factors for the incorporation of the monomers into the polymer chain. LA-based polymers, such as P[LA-co-3-hydroxybutyrate (3HB)], have the properties of pliability and stretchiness which are distinctly different from those of the rigid poly(lactic acid) (PLA) and P(3HB) homopolymers. This versatile platform is also applicable to the biosynthesis of GL- and 2HB-based polymers. In the case of the synthesis of 2HB-based polymers, the enantiospecificity of PHA synthase enabled the production of isotactic (R)-2HB-based polymers, including P[(R)-2HB], from racemic precursors of 2HB. P(2HB) is a pliable material, in contrast to PLA. Furthermore, to obtain a new 2HA-polymerizing PHA synthase, the class I PHA synthase from Ralstonia eutropha was engineered so as to achieve the first incorporation of LA units. The analysis of the polymer synthesized using this new LA-polymerizing PHA synthase unexpectedly focused a spotlight on the studies on block copolymer biosynthesis.     

Extracellular degradation of medium chain length poly(beta-hydroxyalkanoates) by Comamonas sp.

The PHA-degrading isolate, strain P37C, was enriched from residential compost for its ability to hydrolyze the medium chain length PHA, poly(beta-hydroxyoctanoate) (PHO). It was subsequently found to grow on a wide range of PHAs, including both short chain length and medium chain length PHAs. The isolate was identified as belonging to the genus Comamonas. Strain P37C formed clear zones on poly(beta-hydroxybutyrate) (PHB), (PHO) and poly(beta-hydroxyphenylvalerate) (PHPV) overlay plates. PHA clear zone tubes were prepared using seven different kinds of PHAs, ranging from PHB with four-carbon repeating units, to poly(beta-hydroxyoctanoate-co-beta-hydroxyundecanoate) (PHOU) with 8- and 11-carbon repeating units. There was a direct correlation between PHA side chain length and rate of hydrolysis of the PHAs. A series of PHOUs containing varying percentages of unsaturated bonds were used to make a series of epoxidized PHOUs (PHOEs) with varying percentages of epoxy functions. Results of clear zone tube assays showed that these functionalized PHAs were all biodegradable by strain P37C, and there was no apparent correlation between rate of biodegradation and the proportion of functional groups in the PHAs. Biodegradability of these PHAs was verified using respirometry and enzyme assays. Cell-free supernatants containing activity toward PHAs were prepared, and strain P37C was shown to synthesize at least two distinct PHA depolymerases for the hydrolysis of SCL and MCL PHAs.     

Conformational characteristics of polyglutamic acid esters: Persistence of orientational correlation along the side chain flanking the α-helical backbone

The side chain conformations of α-helical poly(L -glutamic acid) esters $ \rlap{--}[NHCH(CH_2 CH_2 COOR)CO\rlap{--}]_x $, carrying a homologous series of ester residues such as R = ? (CH₂)_n? with n = 1–3, have been studied in the lyotropic liquid crystalline state (chloroform 20 v/v%) by the deuterium nmr method. In order to study the surface chirality of the molecule, the phenyl groups situated at the terminal of the side chain have been deuterated. From the observed deuterium quadrupolar splittings, the average inclination θ_p of the para-axis of the phenyl group with respect to the α-helical backbone was elucidated. A distinct odd–even oscillation in the quantity such as 〈 cos² θ_p〉 was observed with the number of methylene units n. A rotational isomeric state analysis has indicated that the observed orientational correlation arises from the interdependence of the neighboring bond rotation along the side chain. Preference of the “extended” conformations is also enhanced by the mutual conformational exclusion of neighboring side chains.     

Polyhydroxyalkanoates: Current applications in the medical field

Polyhydroxyalkanoates (PHAs) are a class of biopolyesters that are synthesized intracellularly by microorganisms, mainly by different genera of eubacteria. These biopolymers have diverse physical and chemical properties that also classify them as biodegradable in nature and make them compatible to living systems. In the last two decades or so, PHAs have emerged as potential useful materials in the medical field for different applications owing to their unique properties. The lower acidity and bioactivity of PHAs confer them with minimal risk compared to other biopolymers such as poly-lactic acid (PLA) and poly-glycolic acid (PGA). Therefore, the versatility of PHAs in terms of their non-toxic degradation products, biocompatibility, desired surface modifications, wide range of physical and chemical properties, cellular growth support, and attachment without carcinogenic effects have enabled their use as in vivo implants such as sutures, adhesion barriers, and valves to guide tissue repair and in regeneration devices such as cardiovascular patches, articular cartilage repair scaffolds, bone graft substitutes, and nerve guides. Here, we briefly describe some of the most recent innovative research involving the use of PHAs in medical applications. Microbial production of PHAs also provides the opportunity to develop PHAs with more unique monomer compositions economically through metabolic engineering approaches. At present, it is generally established that the PHA monomer composition and surface modifications influence cell responses.PHA synthesis by bacteria does not require the use of a catalyst (used in the synthesis of other polymers), which further promotes the biocompatibility of PHA-derived polymers.     

PHA applications: addressing the price performance issue: I. Tissue engineering.

This paper describes the development of medical applications for polyhydroxyalkanoates (PHAs), a class of natural polymers with a wide range of thermoplastic properties. Methods are described for preparing PHAs with high purity, modifying these materials to change their surface and degradation properties, and methods for fabricating them into different forms, including tissue engineering scaffolds. Preliminary reports characterizing their in vivo behavior are given, as well as methods for using the natural polymers in tissue engineering applications.     

Poly‐3‐hydroxyalkanoate synthases from Pseudomonas putida U: substrate specificity and ultrastructural studies

The substrate specificity of the two polymerases (PhaC1 and PhaC2) involved in the biosynthesis of medium‐chain‐length poly‐hydroxyalkanoates (mcl PHAs) in Pseudomonas putida U has been studied in vivo. For these kind of experiments, two recombinant strains derived from a genetically engineered mutant in which the whole pha locus had been deleted (P. putida U Δpha) were employed. These bacteria, which expresses only phaC1 (P. putida U Δpha pMC‐phaC1) or only phaC2 (P. putida U Δpha pMC‐phaC2), accumulated different PHAs in function of the precursor supplemented to the culture broth. Thus, the P. putida U Δpha pMC‐phaC1 strain was able to synthesize several aliphatic and aromatic PHAs when hexanoic, heptanoic, octanoic decanoic, 5‐phenylvaleric, 6‐phenylhexanoic, 7‐phenylheptanoic, 8‐phenyloctanoic or 9‐phenylnonanoic acid were used as precursors; the highest accumulation of polymers was observed when the precursor used were decanoic acid (aliphatic PHAs) or 6‐phenylhexanoic acid (aromatic PHAs). However, although it synthesizes similar aliphatic PHAs (the highest accumulation was observed when hexanoic acid was the precursor) the other recombinant strain (P. putida U Δpha pMC‐phaC2) only accumulated aromatic PHAs when the monomer to be polymerized was 3‐hydroxy‐5‐phenylvaleryl‐CoA. The possible influence of the putative three‐dimensional structures on the different catalytic behaviour of PhaC1 and PhaC2 is discussed.     

Systems Metabolic Engineering Strategies for Non‐Natural Microbial Polyester Production

Plastics, used everyday, are mostly synthetic polymers derived from fossil resources, and their accumulation is becoming a serious concern worldwide. Polyhydroxyalkanoates (PHAs) are naturally produced polyesters synthesized and intracellularly accumulated by many different microorganisms. PHAs are good alternatives to petroleum‐based plastics because they possess a wide range of material properties depending on monomer types and molecular weights. In addition, PHAs are biodegradable and can be produced from renewable biomass. Thus, producing PHAs through the development of high‐performance engineered microorganisms and efficient bioprocesses gained much interest. In addition, non‐natural polyesters comprising 2‐hydroxycarboxylic acids as monomers have been produced by fermentation of metabolically engineered bacteria. For example, poly(lactic acid) and poly(lactic acid‐co‐glycolic acid), which have been chemically synthesized using the corresponding monomers either fermentatively or chemically produced, can be produced by metabolically engineered bacteria by one‐step fermentation. Recently, PHAs containing aromatic monomers could be produced by fermentation of metabolically engineered bacteria. Here, metabolic engineering strategies applied in developing microbial strains capable of producing non‐natural polyesters in a stepwise manner are reviewed. It is hoped that the detailed strategies described will be helpful for designing metabolic engineering strategies for developing diverse microbial strains capable of producing various polymers that can replace petroleum‐derived polymers.     

Synthesis and characterization of polyamides containing unnatural amino acids

We describe the synthesis of several polyamides that retain the secondary structure of proteins and contain derivatizable side chains. The derivatizable side chain allows for further reaction of the polymer chain (e.g., chain cross-linking or addition of pendant groups). Polymers of α-amino acids containing a terminal unsaturated bond on the side chain have been synthesized. Poly-L -pentenyl glycine, poly-L -propargyl glycine, and poly-L -allyl glycine were synthesized chemically via Leuchs' anhydrides and enzymatically using subtilisin Carlsberg. Poly-L -propargyl glycine and poly-D ,L -allyl glycine folded into the β-sheet configuration whereas poly-L -pentenyl glycine assumed a helical conformation. The secondary structure of poly-L -allyl glycine and poly-D ,L -pentenylglycine could not be determined conclusively. Comparison of properties between the polymers obtained chemically and enzymatically is provided. © 1995 John Wiley & Sons, Inc.     

Baicalein protects mice against radiation-induced DNA damages and genotoxicity

Baicalein is the major flavonoid extracted from the root of Scutellaria baicaleins. This flavonoid is used extensively in Chinese herbal medicine. In the present study baicalein is evaluated for its radioprotective properties. Human blood cells when exposed to the γ-radiation ex vivo in presence of baicalein underwent the reduced DNA damage compared to the control. Baicalein administration prior to the whole-body γ-radiation (4 Gy) exposure of mice resulted in protecting the damage to the DNA as measured in their blood cells by alkaline comet assay. Mice when exposed to the radiation (whole body; 1.7 Gy) resulted in damage to the bone marrow as measured by micronucleated reticulocyte (MNRET) formation. Baicalein pre-treatment reduces the radiation induced damage to the bone marrow cells, as there was decrease in the percentage MNRET formation. These findings indicate radio-protecting ability of baicalein.     

Bacillus subtilis as potential producer for polyhydroxyalkanoates

Polyhydroxyalkanoates (PHAs) are biodegradable polymers produced by microbes to overcome environmental stress. Commercial production of PHAs is limited by the high cost of production compared to conventional plastics. Another hindrance is the brittle nature and low strength of polyhydroxybutyrate (PHB), the most widely studied PHA. The needs are to produce PHAs, which have better elastomeric properties suitable for biomedical applications, preferably from inexpensive renewable sources to reduce cost. Certain unique properties of Bacillus subtilis such as lack of the toxic lipo-polysaccharides, expression of self-lysing genes on completion of PHA biosynthetic process – for easy and timely recovery, usage of biowastes as feed enable it to compete as potential candidate for commercial production of PHA.