A new fluorescent chemosensor for Hg2+ in aqueous solution

We prepared an aminothiourea‐derived Schiff base (DA) as a fluorescent chemosensor for Hg²⁺ ions. Addition of 1 equiv of Hg²⁺ ions to the aqueous solution of DA gave rise to an obvious fluorescence enhancement and the subsequent addition of more Hg²⁺ induced gradual fluorescence quenching. Other competing ions, including Pb²⁺, Cd²⁺, Cr³⁺, Zn²⁺, Fe²⁺, Co³⁺, Ni²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺, did not induce any distinct fluorescence changes, indicating that DA can selectively detect Hg²⁺ ions in aqueous solution. Copyright © 2012 John Wiley & Sons, Ltd.     

A fluorescent chemosensor based on naphthol for detection of Zn2+

A simple naphthol‐based fluorescent receptor 1 was prepared and evaluated for its fluorescence response to heavy metal ions. Receptor 1 exhibits an ‘off‐on‐type’ mode with high selectivity in the presence of Zn²⁺ ion. The selectivity of 1 for Zn²⁺ is the consequence of combined effects of chelation‐enhanced fluorescence (CHEF), C = N isomerization and π–π stacking interaction between the two naphthalene rings. Copyright © 2015 John Wiley & Sons, Ltd.     

A novel colorimetric fluorescence sensor for Fe3+ based on quinoline Schiff base

A novel fluorescent sensor bearing a quinoline and an anisidine moiety has been developed for highly selective detection of Fe³⁺, which shows photo‐induced electron transfer (PET) behavior induced by Fe³⁺. Binding of Fe³⁺ to the sensor induced the electron of C = N group transfer from quinoline to iron, the result exhibits fluorescent enhancement. With the features of easy synthesis, simple structural skeleton and excellent sensing ability, the newly synthesized chemosensor also applied as a highly selective fluorescent probe in complex samples containing various competitive metal ions. The probe could fulfill various needs in biological and environmental fields.     

A new Schiff base as a turn‐off fluorescent sensor for Cu2+ and its photophysical properties

A new Schiff base receptor 1 was synthesized and its photophysical properties were investigated by absorption, emission and excitation techniques. Furthermore, its chromogenic and fluorogenic sensing abilities towards various metal ions were examined. Receptor 1 selectively detects Cu²⁺ ion through fluorescence quenching and detection was not inhibited in the presence of other metal ions. From fluorescence titration, the limit of detection of receptor 1 as a fluorescent ‘turn‐off’ sensor for the analysis of Cu²⁺ was estimated to be 0.35 μM.     

Synthesis and photophysical investigation of Schiff base as a Mg2+ and Zn2+ fluorescent chemosensor and its application

In view of the fluorescent switching properties and anti-fatigue properties of diarylethene, a diarylethene fluorescent chemosensor for the immediate detection of zinc ion (Zn²⁺) and magnesium ion (Mg²⁺) in acetonitrile was synthesized in this article. The structure of 1o was determined by performing spectroscopy and elemental analysis. The presence of Zn²⁺ or Mg²⁺ made the chemosensor 1o show an obvious “turn-on” fluorescent signal (bright yellow-green for Mg²⁺ and bright cyan for Zn²⁺). The fluorescent change caused by the 1:1 binding of 1o and Zn²⁺ or Mg²⁺ might be due to hindering the excited-state intramolecular proton transfer (ESIPT) process, which were bolstered by Benesi–Hildebrand analysis, Job's plot curves, proton nuclear magnetic resonance (¹H-NMR) titration and mass spectrometry. The limits of detection were acquired from the standard curve plots for Mg²⁺ at 44.6 nM and for Zn²⁺ at 14 nM. Based on the fluorescent behaviors, a logic gate was constructed with the emission intensity at 528/518 nm as output signal, the ultraviolet-visible (UV-vis) lights, Mg²⁺/Zn²⁺ and EDTA as input signals. Exogenous Zn²⁺ and Mg²⁺ fluorescent bioimaging were performed on Hela cells with 1o , indicating its potential application in biodiagnostic analysis. In particular, 1o was manufactured into test paper, and Zn²⁺ or Mg²⁺ can be conveniently, efficiently and qualitatively identified by the fluorescent color variation of the test strips.     

A tricorn‐rhodamine fluorescent chemosensor for detection of Co2+ ions

A novel chemosensor TrisRh based on tris(2‐aminoethyl)amine and rhodamine 6G is designed and synthesized as a fluorescence turn‐on probe for Co²⁺ ions that is paramagnetic with a property of quenching fluorescence. Rhodamine spirolactam forms are nonfluorescent, whereas, ring‐opening of corresponding spirocyclic induced by Co²⁺ results in strong fluorescence emission. Upon the addition of Co²⁺ ions, TrisRh can display significant enhancements in absorbance and fluorescence intensity as well as evident colorific transformation, which can be perceived by the naked eye. The association stoichiometry of TrisRh to Co²⁺ ions was inferred to be 1:1 through Job's plot and electrospray ionization mass spectrometry analysis. The binding model was speculated from Fourier transform infrared spectra and ¹H–nuclear magnetic resonance technologies. Significantly, the limit of detection was determined to be as low as 1.22 nmol. Furthermore, TrisRh can exhibit robust anti‐jamming ability against other interference metal ions.     

Fluorescent salicylaldehyde hydrazone as selective chemosensor for Zn2+ in aqueous ethanol: a ratiometric approach

4‐N,N‐diethylaminosalicylaldehyde hydrazone Schiff base ( 1 ) and its analogues ( 2 - 6 ) were synthesized and characterized by NMR, MS and elemental analysis. Compound 1 exhibited ratiometric fluorescent response to Zn²⁺ over other metal ions in aqueous ethanol solution with neutral buffer. The complexation ratio, site and constant and the effect of pH value and water fraction on its fluorescent response to Zn²⁺ were investigated. Copyright © 2009 John Wiley & Sons, Ltd.     

A colorimetric and fluorescent chemosensor for selective detection of Cu2+ based on a new diarylethene with a benzophenone hydrazone unit

A new photochromic diarylethene based on benzophenone hydrazone has been synthesized. Its photochromic and fluorescent properties changed upon alternating irradiation with UV /Vis light and adding Cu²⁺/EDTA in methanol, which showed that the diarylethene could be served as a colorimetric and fluorescent chemosensor for selective detection of Cu²⁺ based on internal charge transfer processes. The colorimetric and turn‐off fluorescent selective detection of Cu²⁺ was attributed to the 2:1 complex of the diarylethene and Cu²⁺. The binding constant (Ka ) was 1.53 × 10⁴ L mol^?1 and the limit of detection of the diarylethene for Cu²⁺ was calculated to be 1.45 × 10^?6 mol L^?1. In addition, the metal‐responsive photochromic behavior of diarylethene was applied successfully to the construction of a molecular logic circuit.     

A novel 1,8-naphthalimide-based fluorescent chemosensor for the detection of HSA in living cells

Human serum albumin (HSA) is an essential protein for maintaining human health. Accurate detection and quantification of HSA are of great significance for disease diagnosis and biochemical research. Here, a new HSA fluorescent probe BNPE based on the 1,8-naphthalimide fluorophore was designed and synthesized. The probe could recognize HSA through a twisted intramolecular charge transfer mechanism, effectively avoid the interference of most substances, and realize HSA fluorescence imaging in living cells.     

A comparative study of two thienopyrimidine Schiff base probes for sequential monitoring of Ga3+ and Pd2+

Two Schiff base probes ( S1 and S2 ) were prepared and synthesized by incorporating thienopyrimidine into salicylaldehyde or 3-ethoxysalicylaldehyde individually, with the aim of detecting Ga³⁺ and Pd²⁺ sequentially. Upon chelation with Ga³⁺, S1 and S2 exhibited fluorescence enhancement in DMSO/H₂O buffer. Both S1 –Ga³⁺ and S2 –Ga³⁺ were quenched by Pd²⁺. The limit of detection for S1 in response to Ga³⁺ and Pd²⁺ was 2.86 × 10⁻⁷ and 4.4 × 10⁻⁹ M, respectively. For S2 , the limit of detection for Ga³⁺ and Pd²⁺ was 4.15 × 10⁻⁸ and 3.0 × 10⁻⁹ M, respectively. Furthermore, the complexation ratios of both S1 and S2 with Ga³⁺ and Pd²⁺ were determined to be 1:2 through Job's plots, ESI-MS analysis, and theoretical calculations. Two molecular logic gates were constructed, leveraging the response behaviors of S1 and S2 . Moreover, the potential utility of S1 and S2 for monitoring Ga³⁺ and Pd²⁺ in domestic water was verified.     

A ratiometric fluorescent chemosensor for the detection of cysteine in aqueous solution at neutral pH

A ratiometric fluorescent chemosensor 2‐(2′‐hydroxy‐3′‐formyl‐5′‐methoxyphenyl)benzothiazole ( 1 ) was developed for the detection of cysteine (Cys). In aqueous solution at neutral pH, 1 exhibited a ratiometric fluorescent response to Cys with a remarkable red‐to‐green shift in the emission wavelength. This fluorescence change was attributed to the cyclization reaction between the formyl group in 1 and the amino and sulfhydryl group in Cys in a stoichiometry of 1: 1 according to the proposed mechanism. At neutral pH, 1 displayed a significant fluorescence ratio signal enhancement with the addition of Cys. Furthermore, 1 showed good selectivity toward Cys. The detection limit and linear range were 5.6 and 0–100 μmol/L, respectively, which demonstrated that 1 could recognize relatively low concentrations of Cys and is a good candidate for applications in detecting Cys.     

Water‐soluble polymeric chemosensor for selective detection of Hg2+ in aqueous solution using rhodamine‐based modified poly(acrylamide–acrylic acid)

We report the fabrication of a novel easily available turn‐on fluorescent water‐soluble polymeric chemosensor for Hg²⁺ ions that was simply prepared by micellar free radical polymerization of a water‐insoluble organic rhodamine‐based Hg²⁺‐recognizing monomer (GR6GH), with hydrophilic monomers acrylamide (AM) and acrylic acid (AA). The chemical structure of the polymeric sensor was characterized by FT‐IR and ¹H NMR spectroscopy. The apparent viscosity average molecular weight M_η of poly(acrylamide–acrylic acid) [poly(AM–NaAA)] and the water‐soluble polymeric chemosensor poly(AM–NaAA–GR6GH) were 1.76 × 10⁶ and 6.84 × 10⁴ g/mol, respectively. Because of its amphiphilic property, the water‐soluble polymeric chemosensor can be used as a chemosensor in aqueous media. Upon addition of Hg²⁺ ions to an aqueous solution of poly(AM–NaAA–GR6GH), fluorescence enhancements were observed instantly. Moreover, other metal ions did not induce obvious changes to the fluorescence spectra. This approach may provide an easily measurable and inherently sensitive method for Hg²⁺ ion detection in environmental and biological applications. Copyright © 2015 John Wiley & Sons, Ltd.     

A novel fluorescent probe based on rhodamine hydrazone derivatives bearing a thiophene group for Al3+

In the present work, a novel 5‐methyl‐thiophene‐carbaldehyde‐functionalized rhodamine 6G Schiff base (RA) was designed and easily prepared as an Al³⁺ fluorescent and colorimetric probe, which could selectively and sensitively detect Al³⁺ by showing enhanced fluorescence emission. Meanwhile distinct color variation from colorless to pink also provided ‘naked eye’ detection of Al³⁺, due to the ring spirolactam opening of the rhodamine derivative. Other metal ions (including K⁺, Mg²⁺, Na⁺, Ba²⁺, Mn²⁺, Cd²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Zn²⁺, Hg²⁺, Co²⁺, Li⁺, Sr²⁺ and Cu²⁺) could only induce limited interference. The detection limit of the fluorescent probe was estimated to be 4.17 × 10^?6 M, the binding constant of the RA–Al³⁺ complex was 1.4 × 10⁶ M^?1. Moreover, this fluorescent probe RA possessed high reversibility. As aluminum is a ubiquitous metal in nature and plays vital roles in many biological processes, this chemosensor could be explored for biological study applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Colorimetric detection of in situ metal acetates and fluorides by a bipyridyl‐linked Schiff base

Here, we present a new bipyridyl moiety linked Schiff base (bipy‐1) that is well characterized using spectroscopic techniques. Colorimetric and UV‐vis titrations were used to study the photophysical properties of bipy‐1 in the presence of various tetrabutyl ammonium salt of anions and metal salts containing different counter cations. bipy‐1 showed selective recognition of dimethyl sulphoxide solution of tetrabutyl ammonium salt of F^? ion accompanied with a UV‐vis band at 529 nm and interesting binding of aqueous Co, Ni, and Cu acetates/fluorides, as confirmed by distinct color changes from fluorescent green to pink or orange and a strong band around 480–510 nm in the UV‐vis spectrum. However, in the presence of Co, Ni, and Cu countercations, any form of metal acetate/fluorides was found to be able to respond to similar color changes from fluorescent green to pink or orange, showing a band around 480–510 nm. This type of output clearly indicates that the in situ formation of Co, Ni, and Cu acetates/fluorides also coordinates with bipyridyl nitrogen atoms. Copyright © 2014 John Wiley & Sons, Ltd.     

A novel copper(II) complex with a pendant Schiff base: An unprecedented monodentate bonding mode of the potentially tridentate ligand

The 1:1 condensation of 1-benzoylacetone and 1,2-diaminopropane yields 6-amino-3-methyl-1-phenyl-4-azahept-2-en-1-one (HL). When copper(II) perchlorate is added to the methanolic solution of HL, followed by triethylamine in 1:2:1 molar ratio, an unusual copper(II) complex, [Cu(L)(HL)]ClO₄, is separated out where the deprotonated ligand, L, is coordinated in the usual chelating tridentate manner but HL is coordinated to Cu(II) only through the amine N, i.e. it acts as a pendant ligand. The complex is characterized by X-ray crystal structure analysis.     

Synthesis and characterization of di- and tri-organotin(IV) complexes with Schiff base ligand pyruvic acid 3-hydroxy-2-naphthoyl hydrazone

A series of organotin(IV) complexes with Schiff base ligand pyruvic acid 3-hydroxy-2-naphthoyl hydrazone [R₂SnLY]₂, L = 3-HO-C₁₀H₆-2-CONHNC(CH₃)COOH, R = n-C₄H₉, Y = CH₃OH (1), R = n-C₄H₉, Y = N (2), R = PhCH₂ (3), R = Ph, Y = CH₃OH (4), R = Me, (5) and [R₃SnLY], L = 3-HO-C₁₀H₆-2-CONHNC(CH₃)COOH, R = n-C₄H₉, Y = H₂O, (6), R = Ph (7), R = Me (8) have been synthesized. These complexes have been characterized by elemental analysis, IR, ¹H and ¹¹⁹Sn NMR spectra. The crystal and molecular structure of complexes 1, 2 and 6 have been determined by X-ray single crystal diffraction. Results showed that complex 1 has a dimeric structure and the central tin atom is rendered seven-coordinate in a distorted pentagonal-bipyramid configuration. The complex 2 has a monoclinic structure and the central tin atom is rendered six-coordinate in octahedrally configuration with a planar of SnO₃N unit and two apical aryl C atoms. And the whole structure consists of molecular units connected by weak intermolecular Sn?N and O-H?N interactions. In the complex 6, the central tin atom is five-coordinate in distorted trigonal-bipyramidal geometry.     

A highly selective fluorescent chemosensor for Cu2+: synthesis and properties of a rhodamine B‐containing diarylethene

A diarylethene bearing a triazole‐linked rhodamine B unit was synthesized. Its fluorescent emission was significantly enhanced in the presence of protons or Cu²⁺ due to transformation from the pirocyclic form to open‐ring form. The fluorescence was quenched sequentially upon irradiation with 297 nm light based on the intramolecular fluorescence resonance energy transfer mechanism. In an acetonitrile: water binary solvent (1: 1 v /v), the compound showed significant fluorescent enhancement for Cu²⁺ compared with a wide range of tested metal ions with a fast response and a limit of detection of 2.86 × 10^?8 mol L^?1. Using Cu²⁺ and UV light as the chemical inputs, and fluorescence intensity at 597 nm as the output, a logic gate was developed at the molecular level. Moreover, the compound can be used with a high accuracy to detect Cu²⁺ in a natural water sample.     

Colorimetric detection of oxalate in aqueous solution by a pyrogallol red‐based Cu2+ complex

The pyrogallol red (PR)‐based Cu²⁺ complex was proven to be an effective and selective colorimetric chemosensing ensemble for recognition of oxalate over other anions in a perfect aqueous solution. The addition of oxalate to the PR–Cu²⁺ complex resulted in a colour change from purple to orange colour due to the regeneration of PR by the chelation of oxalate with Cu²⁺, while other anions did not induce any significant colour change. Moreover, it was revealed that no obvious interference was observed during the titrations with oxalate into each other anion. Therefore, the PR–Cu²⁺ complex can be used as a simple and practical colorimetric chemosensor for detecting oxalate.     

Synthesis,ADME, docking studies and in vivo anti-hyperglycaemic potential estimation of novel Schiff base derivatives from octadec-9-enoic acid

A new series of octadec-9-enoic acid schiff base entities (S1-S30) were designed and synthesized targeting peroxisome proliferator activated receptor-gamma for agonist action. Molinspiration software (online) was used to estimate drug like molecular properties of the metabolites. Docking disquisition on co-crystallized protein of PPAR-γ (PDB ID 1FM9) was carried out which showed S21, S10 and S7 as best situated in the vital sites of receptor having docking scores −9.19, −8.68 and −8.64 respectively. Free binding energy measured using model of Maestro 9.0 and was in range of from −40.01 and −80.54 kcal/mol, significant when compared with pioglitazone (−51.58 Kcal/mol). Seven best docked derivatives were assessed for in-vivo oral glucose tolerance on normal rats and anti-hyperglycaemic activity by streptozotocin induced diabetes model. S21 unveiled to be the best measured analogue among all the synthesized entities. Encouraging outcomes motivates fatty acids for further development of more effective and safer compounds.