Cultivation of the green alga, Codium fragile (Suringar) Hariot, by artificial seed production in Korea

Codium fragile (Suringar) Hariot is an edible green alga farmed in Korea using seed stock produced from regeneration of isolated utricles and medullary filaments. Experiments were conducted to reveal the optimal conditions for nursery culture and out-growing of C. fragile. Sampling and measurement of underwater irradiance were carried out at farms cultivating C. fragile at Wando, on the southwestern coast of Korea, from October 2004 to August 2005. Growth of erect thalli and underwater irradiance were measured over a range of depths for three culture stages. During the nursery cultivation stage (Stage I), growth rate was greatest at 0.5 m depth (0.055 ± 0.032 mm day⁻¹), where the average midday irradiance over 60 days was 924 ± 32 μmol photons m⁻² s⁻¹. During the pre-main cultivation stage (Stage II), the greatest growth rate occurred at a depth of 2 m (0.113 ± 0.003 mm day⁻¹) with an average irradiance of 248 ± 116 μmol photons m⁻² s⁻¹. For the main cultivation stage (Stage III) of the alga, thalli achieved the greatest increase in biomass at 1 m depth (7.2 ± 1.0 kg fresh wt m⁻¹). These results suggest that optimal growth at each cultivation stages of C. fragile could be controlled by depth of cultivation rope.     

Assessment of optimal depth and photon irradiance for cultivation of the brown alga, <Emphasis Type="Italic">Sargassum fulvellum</Emphasis> (Turner) C. Agardh

This study was aimed at determining the optimal depth and photon irradiance for growth of Sargassum fulvellum. Sampling and measurement of underwater irradiance were carried out at farms cultivating S. fulvellum at Wando, southwestern coast of Korea, from May 2004 to April 2005. Growth of thalli, underwater irradiance and photosynthetic quantum yield were measured over a range of depths for three culture stages. During their nursery cultivation stage (Stage I), length increase was greatest at 1.5 m depth (2.5 ± 0.2 cm), where the average midday irradiance over 28 days was 488 ± 58 μmol photons m⁻² s⁻¹. During the pre-main cultivation stage (Stage II), the greatest length increase occurred at 1 m depth (10.9 ± 0.1 cm) with an average irradiance of 845 ± 169 μmol photons m⁻² s⁻¹. For the main cultivation stage (Stage III) of the alga, thalli showed maximal length growth in March and early April at depths of 1–2 m and 3 m. These results suggest that growth at each cultivation stage of S. fulvellum could be controlled by depth of cultivation rope. Presented at the 6th Meeting of the Asian Pacific Society of Applied Phycology, Manila, Philippines.     

Integrated seaweed cultivation on an abalone farm in South Africa

Land-based abalone aquaculture in South Africa, based on the local species Haliotis midae, started in the early 1990s and has grown rapidly in the last decade, with 13 commercial farms now producing over 850 t per annum. Over 6,000 t per annum of kelp Ecklonia maxima are now harvested for this purpose, and some kelp beds are reaching maximum sustainable limits. Research into seaweed aquaculture as feed (Ulva and some Gracilaria) for abalone started in the late 1990s on the southeast coast (where there are no kelp beds) using abalone waste water. A growing body of evidence suggests that a mixed diet of kelp plus other seaweeds can give growth rates at least as good as compound feed, and can improve abalone quality and reduce parasite loads. A pilot scale Ulva lactuca and abalone integrated recirculation unit using 25% recirculation was designed and built on the south west coast of South Africa using one 12,000-L abalone tank containing 13,200 15 ± 2.5 g abalone, connected to two 3,000-L seaweed tanks containing an initial starting biomass of 10 kg of seaweed, replicated 3 times. In an 18-month period, there were no significant differences in abalone health or growth rates, sediment build up and composition, mobile macro fauna densities and species between the recirculation or the flow-through units. Transfer of oxygen generated by the seaweeds to the abalone tanks was poor, resulting in the recirculated abalone tanks having lower (33%) dissolved oxygen concentrations than a comparable flow-through abalone unit. Seaweed nutrient content and specific growth rates in the units were comparable to seaweeds cultivated in fertilized effluent (SGR = 3.2 ± 3.4%.day⁻¹; Yield = 0.2 ± 0.19 kg.m².day⁻¹). Indications were that at this low recirculation ratio the seaweeds in the units were nutrient limited and that there were no negative effects to the abalone being cultivated in such a recirculation unit at this recirculation ratio.     

Use of Acadian marine plant extract powder from Ascophyllum nodosum in tissue culture of Kappaphycus varieties

Three varieties of Kappaphycus alvarezii (Kapilaran, KAP), Tambalang purple (PUR), Adik-adik (AA), and one variety of Kappaphycus striatum var. sacol (green sacol (GS) were used to determine the efficiency of Acadian marine plant extract powder (AMPEP) as a culture medium at different concentrations, for the regeneration of young plants of Kappaphycus varieties, using tissue culture techniques for the production of seed stock for nursery and outplanting purposes for the commercial cultivation of carrageenophytes. A shorter duration for shoot formation was observed when the explant was treated with AMPEP + Plant Growth Regulator (PGR = PAA + zeatin at 1 mg L⁻¹) compared to AMPEP when used singly. However, four explants responded differently to the number of days required for shoot formation. The KAP variety took 46 days to form shoots at 3–4 mg L⁻¹ AMPEP + PGR; while PUR required 21 days at 3–5 mg L⁻¹ AMPEP and 3–4 mg L⁻¹ AMPEP + PGR. AA required 17 days at 3–5 mg L⁻¹ AMPEP and AMPEP + PGR; and GS 25 days at 1 mg L⁻¹ AMPEP + PGR. It was observed that among the four explants used, PUR and AA initiated shoot formation with the use of AMPEP only at higher concentrations (3–5 mg L⁻¹) after a shorter period. Only PUR responded positively to ESS/2 for shoot initiation. The use of AMPEP alone and/or in combination with PGR as a culture medium in the propagation of microplantlets using tissue culture technique is highly encouraging.     

Cultivation of a brown alga, <Emphasis Type="Italic">Undariopsis peterseniana</Emphasis> (Kjellman) Miyabe and Okamura,as a warm-temperature species by artificial seed production in Korea

Undariopsis peterseniana is an endangered annual brown alga in Udo, Jeju Island, Korea. There is current interest in the commercial-scale aquaculture of this species for warm-water species development in Korea. Growth and maturation were investigated from January to December 2007 in their natural habitat. Zoospores were transplanted into an intensive seaweed culture ground in Wando, southern coast of Korea, for the mass cultivation of this species. Indoor and outdoor cultivation were conducted from June 2007 to May 2008. Mean production obtained from the zoospore seeding was 31.1 ± 1.5 kg wet wt. m⁻¹ of culture rope during the cultivation period in situ. Transplanted F₁ thalli in Wando had a length 1.7 times longer than their parents in Udo, and their maximal growth period changed from June (at 19.9°C in Udo of natural habitat) to April (at 14.0°C in Wando of culture ground). The relationship between optimal water depth for culture and underwater irradiance during the U. peterseniana cultivation was defined as: y = - 0.78 ×+ 7.67( r² = 0.92 ) y = - 0.78 \times + 7.67\left( {{r^2} = 0.92} \right) . This study indicates that U. peterseniana could be successfully transferred to the northern coast beyond the original habitat in Jeju Island.     

The viability to a wall shear stress and propagation of <Emphasis Type="Italic">Bifidobacterium longum</Emphasis> in the intensive membrane bioreactor

Bifidobacterium longum grew at 65 L pilot scale of the membrane bioreactor (MBR), externally fitted with ceramic membrane (0.7 m²). Cell mass at the MBR reached 22.18 g L⁻¹ as dry cell weight in 12 h, which is 8.44 times higher than cell mass attained at the vial culture. The growth rate in the vial culture was μ = 0.385 h⁻ and at the batch culture was μ = 1.13 h⁻ in the exponential period and μ = 0.31 h⁻¹ in the stationary period. In the fed-batch mode was μ = 1.102 h⁻¹ for 6 h with inoculation and declined to μ = 0.456 h⁻¹ with feeding of feed medium. The growth rate at the MBR was μ = 0.134 h⁻¹. The number of viable cells was 6.01 × 10¹² cfu L⁻¹ at the batch culture, but increased to 1.15 × 10¹⁴ cfu L⁻¹ at the MBR culture. The specific growth rate of viable cell number (colony-forming units per liter, per hour) improved by 6.01 times from the batch to the MBR culture. The wall shear stress mainly generated by the pump, and the membrane incorporated into the MBR was controlled during the cultivation at the MBR. The viability of B. longum declined to under 10% in the first 2 weeks of the 4-week stability test (40°C) as B. longum was exposed to over wall shear stress 713 Pa, but the viability improved to 30–40% in wall shear stress of 260 Pa or STR culture. The loss in the cell viability can be saved by managing with wall shear stress during the cultivation at the MBR.     

Growth and carrageenan quality of <Emphasis Type="Italic">Kappaphycus striatum</Emphasis> var. <Emphasis Type="Italic">sacol</Emphasis> grown at different stocking densities,duration of culture and depth

Kappaphycus striatum var. sacol was grown in two separate studies: (1) at two stocking densities, and (2) at four different depths, each for three different durations of culture (30, 45 and 60 days) in order to determine the growth rate of the seaweed and evaluate the carrageenan content and its molecular weight. The results demonstrated that stocking density, duration of culture and depth significantly (P < 0.01) affected the growth rate, carrageenan content and molecular weight of K. striatum var. sacol. Decreasing growth rate was observed at both stocking densities and at four depths as duration of culture increased. A lower stocking density (500 g m⁻¹line⁻¹) showed a higher growth rate for the shortest durations, i.e. 30 days, as compared to those grown at a higher density. Likewise, decreasing growth rate was observed as depth increased, except at 50 cm after 60 days of culture. A 45-day culture period produced the highest molecular weight at both stocking densities (500 g m⁻¹line⁻¹ = 1,079.5 ± 31.8 kDa, 1,000 g m⁻¹line⁻¹ = 1,167 ± 270.6 kDa). ‘Sacol’ grown for 30 days at 50 cm (1,178 kDa) to 100 cm (1,200 kDa) depth showed the highest values of molecular weight of carrageenan extracted. The results suggested that K. striatum var. sacol is best grown at a stocking density of 500 g m⁻¹line⁻¹, at a depth of 50–100 cm, and for a duration of 30 days in order to provide the highest growth rate, carrageenan content and molecular weight.     

Effect of eight benthic diatoms as feed on the growth of red abalone (Haliotis rufescens) postlarvae

The growth rate of abalone post larvae of Haliotis rufescens fed ad libitum with a benthic monoalgal diatom culture maintained as monocultures on a semi-commercial scale, was evaluated and correlated with the biochemical composition of the diatoms. The cell size (7.0 × 4.0 μm to 21.0 × 7.5 μm), protein percentage (7.42% to 13.66%), and ash content (49.03% to 59.61%) were different among diatom strains; lipid percentage, nitrogen free extract, and energy content (Kcal g⁻¹) were similar among diatom strains. The values of essential and non-essential amino and fatty acids composition differed among diatom strains. Differences in the abalone shell length and orthogonal analyses revealed postlarval growth was dependent on the quality of the food source. Postlarvae abalone displaying the longest shell lengths were fed Nitzschia thermalis var. minor and Amphiprora paludosa var. hyalina (1,712.0 ± 61 μm and 1,709 ± 67 μm, respectively), followed by Navicula incerta (1,413.3 ± 43 μm). The fatty acid content of benthic diatoms and abalone growth rate were not correlated.     

Palm oil mill effluent (POME) cultured marine microalgae as supplementary diet for rotifer culture

Malaysia is the world’s leading producer of palm oil products that contribute US$ 7.5 billion in export revenues. Like any other agro-based industries, it generates waste that could be utilized as a source of organic nutrients for microalgae culture. Present investigation delves upon Isochrysis sp. culture in POME modified medium and its utilization as a supplement to Nanochloropsis sp. in rotifer cultures. The culture conditions were optimized using a 1 L photobioreactor (Temp: 23°C, illumination: 180 ∼ 200 μmol photons m⁻²s⁻¹, n = 6) and scaled up to 10 L outdoor system (Temp: 26–29°C, illumination: 50 ∼ 180 μmol photons m⁻²s⁻¹, n = 3). Algal growth rate in photobioreactor (μ = 0.0363 h⁻¹) was 55% higher compared to outdoor culture (μ = 0.0163 h⁻¹), but biomass production was 1.3 times higher in outdoor culture (Outdoor = 91.7 mg m⁻²d⁻¹; Photobioreactor = 69 mg m⁻²d⁻¹). Outdoor culture produced 18% higher lipid; while total fatty acids (FA) was not significantly affected by the change in culture systems as both cultures yield almost similar concentrations of fatty acids per gram of sample (photobioreactor = 119.17 mg g⁻¹; outdoor culture = 104.50 mg g⁻¹); however, outdoor cultured Isochrysis sp. had 26% more polyunsaturated fatty acids (PUFAs). Rotifers cultured in Isochrysis sp./ Nanochloropsis sp. (1:1, v/v) mixture gave similar growth rate as 100% Nanochoropsis sp. culture (μ = 0.40 d⁻¹), but had 45% higher counts of rotifers with eggs (t = 7, maximum). The Isochrysis sp. culture successfully lowered the nitrate (46%) and orthophosphate (83%) during outdoor culture.     

Kinetic models for phycocyanin production by high cell density mixotrophic culture of the microalga Spirulina platensis

Phycocyanin production by high cell density cultivation of Spirulina platensis in batch and fed-batch modes in 3.7-L bioreactors with a programmed stepwise increase in light intensity program was investigated. The results showed that the cell density in fed-batch culture (10.2 g L⁻¹) was 4.29-fold that in batch culture (2.38 g L⁻¹), and the total phycocyanin production in the fed-batch culture (0.795 g L⁻¹) was 3.05-fold that in the batch culture (0.261 g L⁻¹). An unstructured kinetic model to describe the microalga culture system including cell growth, phycocyanin formation, as well as glucose consumption was proposed. The data fitted the models well (r ² > 0.99). Furthermore, based on the kinetic models, the potential effects of light limitation and photoinhibition on cell growth and phycocyanin formation can be examined in depth. The models demonstrated that the optimal light intensity for mixotrophic growth of Spirulina platensis in batch or fed-batch cultures using a 3.7-L bioreactor was 80160 μE m⁻² s⁻¹, and the stepwise increase in light intensity can be replaced by a constant light intensity mode. Received 28 July 1998/ Accepted in revised form 8 October 1998     

Optimization of culture conditions for tissue culture production of young plantlets of carrageenophyte <Emphasis Type="Italic">Kappaphycus</Emphasis>

To improve the production of Kappaphycus plantlets in tissue culture, optimum media concentrations of an Ascophyllum nodosum extract (Acadian Marine Plant Extract Powder, AMPEP), plant growth regulators (PGR), pH–temperature combinations, and explant density were determined. Kappaphycus alvarezii var. tambalang purple (PUR), kapilaran brown (KAP), vanguard brown (VAN), adik-adik (AA), tungawan green (TGR), and K. striatum var. sacol green (GS) were used as explants. Based on the shortest period for shoot emergence and the economical use of AMPEP, the optimum enriched media was 3.0 mg L⁻¹ AMPEP and 0.1 mg L⁻¹ AMPEP + PGR 1 mg L⁻¹ each phenylacetic acid (PAA) and zeatin for PUR, 1.0 mg L⁻¹ AMPEP + PGR for KAP and GS, 0.1 mg L⁻¹ AMPEP + PGR for VAN, and 3.0 mg L⁻¹ AMPEP and 0.001 mg L⁻¹ AMPEP + PGR for AA and TGR. Results showed that the addition of PGR to low concentrations of AMPEP hastened shoot formation. pH–temperature combinations for the most rapid shoot formation were determined for the brown (KAP) and purple (PUR) color morphotypes of K. alvarezii var. tambalang and the green morphotype of K. striatum var. sacol (GS) cultured in 1.0 mg L⁻¹ AMPEP + PGR. The brown morphotype produced the most number of shoots at pH 7.7 at 20°C after as little as 20 days. Purple K. alvarezii showed an increased shoot formation at pH 6.7 at 25°C and the green K. striatum morphotype at pH 8.7 at 25°C. The optimum number of explants added to the culture media was also determined for tungawan green (TGR), brown (KAP), and tambalang purple (PUR) varieties of K. alvarezii in 1.0 mg L⁻¹ AMPEP + PGR. The number of explants and the volume of the culture media combination were also tested. The highest average number of shoots formed occurred in two explants:1 mL culture media (2:1) for KAP and PUR (35.00% and 16.67%, respectively) and 1 explant: 2 mL culture media for the TGR (100.00%) with a range of 0.5–3.0 mm shoot length after 40 days in culture. The earliest shoot formation was observed after 21 days for the brown and 9 days for both the green and purple color morphotypes of Kappaphycus, in all densities investigated. This indicated that within the range tested, the density of explants did not have a significant effect on the rate of shoot formation but did influence the average number generated from the culture. The rate of production of new and improved Kappaphycus explants for a commercial nursery stock was improved through the use of AMPEP with optimized culture media pH, temperature, and density conditions.     

Continuous cultures of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> mt-2 overcome catabolic function loss under real case operating conditions

The long-term performance and stability of Pseudomonas putida mt-2 cultures, a toluene-sensitive strain harboring the genes responsible for toluene biodegradation in the archetypal plasmid pWW0, was investigated in a chemostat bioreactor functioning under real case operating conditions. The process was operated at a dilution rate of 0.1 h⁻¹ under toluene loading rates of 259 ± 23 and 801 ± 78 g m⁻³ h⁻¹ (inlet toluene concentrations of 3.5 and 10.9 g m⁻³, respectively). Despite the deleterious effects of toluene and its degradation intermediates, the phenotype of this sensitive P. putida culture rapidly recovered from a 95% Tol⁻ population at day 4 to approx. 100% Tol⁺ cells from day 13 onward, sustaining elimination capacities of 232 ± 10 g m⁻³ h⁻¹ at 3.5 g Tol m⁻³ and 377 ± 13 g m⁻³ h⁻¹ at 10.9 g Tol m⁻³, which were comparable to those achieved by highly tolerant strains such as P. putida DOT T1E and P. putida F1 under identical experimental conditions. Only one type of Tol⁻ variant, harboring a TOL-like plasmid with a 38.5 kb deletion (containing the upper and meta operons for toluene biodegradation), was identified.     

Production of ginsenoside and polysaccharide by two-stage cultivation of Panax quinquefolium L. cells

Based on the results of carbon source consumption in cell suspension culture of Panax quinquefolium L., 30 g L⁻¹ sucrose was fed into a 5-L stirred tank bioreactor on day 16 of culture to enhance cell density and metabolite production. Using a fed-batch cultivation strategy, polysaccharide production was enhanced to 1.608 g L⁻¹, which was 1.96-fold greater than with batch cultivation. The maximum saponin yield (7.828 mg L⁻¹) was obtained on day 24 and was about 36% higher than the yields obtained using batch cultivation. In a two-stage culture process, a combined treatment with sucrose, lactoalbumin hydrolysate, and methyl jasmonate caused a significant increase in total saponin yield (31.52 mg L⁻¹) in cell cultures after 27 d. This value represents an increase of 4.03-fold compared with the total saponin yield in fed-batch cultivation. The two-stage culture mode provided the best method for the in vitro production of secondary metabolites from P. quinquefolium.     

Artificial Seed Production and Cultivation of the Edible Brown Alga, Sargassum Fulvellum (Turner) C. Agardh: Developing a new Species for Seaweed Cultivation in Korea

Sargassum fulvellum is a brown alga recently introduced to the seaweed cultivation industry in Korea. There is current interest in the commercial scale of aquaculture of this species. For the artificial seeding and cultivation of this alga, growth and maturation were investigated from September 2002 to August 2003. Indoor culture experiments for maturation induction were also conducted at temperatures of 5, 10, 15, 20 and 25 ^∘C and irradiances of 20, 50, 80 and 100 μmol photons m⁻² s⁻¹ under 16:8 h (L:D) photoperiod. Within a given culture test range, higher temperature and irradiance levels favoured the maturation of receptacles in S. fulvellum. Using temperature and irradiance control for thalli, artificial seed production of this species could be done one month earlier than thalli matured in nature. Under natural condition, receptacle formation of the plants began in February, and the eggs were released from March to April. For mature thalli of 200 g wet wt., artificial seeding was complete enough for attachment on seed strings of 100 m. Mean production obtained from the artificial seeding technique in situ was 3.0 kg wet wt m⁻¹ of culture rope during the cultivation period.     

Effects of arbuscular mycorrhizal fungi on seedling growth and development of two wetland plants, Bidens frondosa L., and Eclipta prostrata (L.) L., grown under three levels of water availability

To identify the importance of arbuscular mycorrhizal fungi (AMF) colonizing wetland seedlings following flooding, we assessed the effects of AMF on seedling establishment of two pioneer species, Bidens frondosa and Eclipta prostrata grown under three levels of water availability and ask: (1) Do inoculated seedlings differ in growth and development from non-inoculated plants? (2) Are the effects of inoculation and degree of colonization dependent on water availability? (3) Do plant responses to inoculation differ between two closely related species? Inoculation had no detectable effects on shoot height, or plant biomass but did affect biomass partitioning and root morphology in a species-specific manner. Shoot/root ratios were significantly lower in non-inoculated E. prostrata plants compared with inoculated plants (0.381 ± 0.066 vs. 0.683 ± 0.132). Root length and surface area were greater in non-inoculated E. prostrata (259.55 ± 33.78 cm vs. 194.64 ± 27.45 cm and 54.91 ± 7.628 cm² vs. 46.26 ± 6.8 cm², respectively). Inoculation had no detectable effect on B. frondosa root length, volume, or surface area. AMF associations formed at all levels of water availability. Hyphal, arbuscular, and vesicular colonization levels were greater in dry compared with intermediate and flooded treatments. Measures of mycorrhizal responsiveness were significantly depressed in E. prostrata compared with B. frondosa for total fresh weight (−0.3 ± 0.18 g vs. 0.06 ± 0.06 g), root length (−0.78 ± 0.28 cm vs.−0.11 ± 0.07 cm), root volume (−0.49 ± 0.22 cm³ vs. 0.06 ± 0.07 cm³), and surface area (−0.59 ± 0.23 cm² vs.−0.03 ± 0.08 cm²). Given the disparity in species response to AMF inoculation, events that alter AMF prevalence in wetlands could significantly alter plant community structure by directly affecting seedling growth and development.     

High-level succinic acid production and yield by lactose-induced expression of phosphoenolpyruvate carboxylase in ptsG mutant Escherichia coli

Escherichia coli strains with foreign genes under the isopropyl-β-d-thiogalactopyranoside-inducible promoters such as lac, tac, and trc were engineered and considered as the promising succinic acid-producing bacteria in many reports. The promoters mentioned above could also be induced by lactose, which had not been attempted for succinic acid production before. Here, the efficient utilization of lactose as inducer was demonstrated in cultures of the ptsG, ldhA, and pflB mutant strain DC1515 with ppc overexpression. A fermentative process for succinic acid production at high level by this strain was developed. In flask anaerobic culture, 14.86 g l⁻¹ succinic acid was produced from 15 g l⁻¹ glucose with a yield of 1.51 mol mol⁻¹ glucose. In two-stage culture carried out in a 3-l bioreactor, the overall yield and concentration of succinic acid reached to 1.67 mol mol⁻¹ glucose and 99.7 g l⁻¹, respectively, with a productivity of 1.7 g l⁻¹ h⁻¹ in the anaerobic stage. The efficient utilization of lactose as inducer made recombinant E. coli a more capable strain for succinic acid production at large scale.     

Photoautotrophic Production of Lipids by Some <Emphasis Type="Italic">Chlorella</Emphasis> Strains

The microalgae Chlorella protothecoides UTEX 25, Chlorella sp. TISTR 8991, and Chlorella sp. TISTR 8990 were compared for use in the production of biomass and lipids under photoautotrophic conditions. Chlorella sp. TISTR 8990 was shown to be potentially suitable for lipid production at 30°C in a culture medium that contained only inorganic salts. For Chlorella sp. TISTR 8990 in optimal conditions in a stirred tank photobioreactor, the lipid productivity was 2.3 mg L⁻¹ h⁻¹ and after 14 days the biomass contained more than 30% lipids by dry weight. To attain this, the nitrogen was provided as KNO₃ at an initial concentration of 2.05 g L⁻¹ and chelated ferric iron was added at a concentration of 1.2 × 10⁻⁵ mol L⁻¹ on the ninth day. Under the same conditions in culture tubes (36 mm outer diameter), the biomass productivity was 2.8-fold greater than in the photobioreactor (0.125 m in diameter), but the lipid productivity was only 1.2-fold higher. Thus, the average low-light level in the photobioreactor actually increased the biomass specific lipid production compared to the culture tubes. A light-limited growth model closely agreed with the experimental profiles of biomass production, nitrogen consumption, and lipid production in the photobioreactor.     

Reaction engineering studies for the production of 2-hydroxyisobutyric acid with recombinant Cupriavidus necator H 16

Recombinant Cupriavidus necator H 16 with a novel metabolic pathway using a cobalamin-dependent mutase was exploited to produce 2-hydroxyisobutyric acid (2-HIBA) from renewable resources through microbial fermentation. 2-HIBA production capacities of different strains of C. necator H 16 deficient in the PHB synthase gene and genetically engineered to enable the production of 2-HIBA from the intracellular PHB precursor (R)-3-hydroxybutyryl-CoA were evaluated in 48 parallel milliliter-scale stirred tank bioreactors (V = 11 mL). The effects of media composition, limitations, pH, and feed rate were studied with respect to the overall process performances of the different recombinant strains. 2-HIBA production was at a maximum at nitrogen limiting conditions and if the pH was controlled between 6.8 and 7.2 under fed-batch operating conditions (intermittent fructose addition). The final concentration of 2-HIBA was 7.4 g L⁻¹ on a milliliter scale. Best reaction conditions identified on the milliliter scale were transferred to a laboratory-scale fed-batch process in a stirred tank bioreactor (V = 2 L). Two different process modes for the production of 2-HIBA, a single-phase and a dual-phase fermentation procedure, were evaluated and compared on a liter scale. The final concentration of 2-HIBA was 6.4 g L⁻¹ on a liter scale after 2 days of cultivation.     

Production of hexanoic acid from d-galactitol by a newly isolated Clostridium sp. BS-1

In a study screening anaerobic microbes utilizing d-galactitol as a fermentable carbon source, four bacterial strains were isolated from an enrichment culture producing H₂, ethanol, butanol, acetic acid, butyric acid, and hexanoic acid. Among these isolates, strain BS-1 produced hexanoic acid as a major metabolic product of anaerobic fermentation with d-galactitol. Strain BS-1 belonged to the genus Clostridium based on phylogenetic analysis using 16S rRNA gene sequences, and the most closely related strain was Clostridium sporosphaeroides DSM 1294^T, with 94.4% 16S rRNA gene similarity. In batch cultures, Clostridium sp. BS-1 produced 550 ± 31 mL L⁻¹ of H₂, 0.36 ± 0.01 g L⁻¹ of acetic acid, 0.44 ± 0.01 g L⁻¹ of butyric acid, and 0.98 ± 0.03 g L⁻¹ of hexanoic acid in a 4-day cultivation. The production of hexanoic acid increased to 1.22 and 1.73 g L⁻¹ with the addition of 1.5 g L⁻¹ of sodium acetate and 100 mM 2-(N-morpholino)ethanesulfonic acid (MES), respectively. Especially when 1.5 g L⁻¹ of sodium acetate and 100 mM MES were added simultaneously, the production of hexanoic acid increased up to 2.99 g L⁻¹. Without adding sodium acetate, 2.75 g L⁻¹ of hexanoic acid production from d-galactitol was achieved using a coculture of Clostridium sp. BS-1 and one of the isolates, Clostridium sp. BS-7, in the presence of 100 mM MES. In addition, volatile fatty acid (VFA) production by Clostridium sp. BS-1 from d-galactitol and d-glucose was enhanced when a more reduced culture redox potential (CRP) was applied via addition of Na₂S·9H₂O.     

Growing Ulva (Chlorophyta) in integrated systems as a commercial crop for abalone feed in South Africa: a SWOT analysis

Over 1,000t fresh weight of Ulva was cultivated on South African abalone farms in 2007, primarily for feed, but in one case to allow partial re-circulation by nutrient removal. The potential of this new commercial crop is analysed. Material is collected from natural free-floating populations and at least four species are commonly grown, with different ecophysiological characteristics. A brown epiphyte, Myrionema strangulans, causes a disease of the Ulva, which is currently managed by farmers by re-stocking. The main potential threat is that some farmers are wary of integrated systems, fearing they may promote disease in abalone, although Ulva has been grown in abalone effluent and fed back to the abalone on one farm for 6 years without adverse effects. Opportunities exist for the expansion of Ulva cultivation via further spread of the abalone industry, the inclusion of seaweed raceways in proposed fish-farming activities, or the potential for the inclusion of high quality cultivated Ulva as a constituent in aquafeed. A conservative estimate of production over a full year from these raceway systems was 26.1 g dw m⁻² day⁻¹ (2006) and 19.7 g dw m⁻² day⁻¹ (2007), similar to maximum figures for total annual microalgal biomass production in outdoor systems.