Effects of Leaf Wetness Duration and Inoculum Level on Resistance of Wheat Genotypes to Pyrenophora tritici-repentis

Percent leaf necrosis and lesion length on wheat genotypes increased markedly with increasing duration of leaf wetness (up to 24h or 48 h) following inoculation with Pyrenophora tritici-repentis. A long wetting duration favoured less disease development on resistant (Fink's'), and moderately resistant (Bon/YR/3/F3570//KAL/BB) genotypes than on susceptible Glenlea. No significant difference in per cent necrosis was detected among the upper three leaf positions within a genotype. A long wetness duration had a varying effect on the resistance of wheat genotypes, depending upon the inoculum level. Increasing the inoculum level along with the leaf wetness period increased the per cent leaf necrosis on all three wheat genotypes tested. However, the ranking of the genotype for resistance did not alter even after prolonged duration of leaf wetness (up to 96 h) and/or high inoculum level (12000 conidia/ml water). Various post-inoculation wet-periods in combination with high conidia concentrations in inoculum should be used in identifying highly resistant germplasm in breeding populations at the seedling stage of the wheats.     

Factors affecting incidence and severity of leaf spot disease on lettuce caused by Septoria birgitae

In the 1990s during wet seasons a new disease causing brown leaf spots on lettuce (Lactuca sativa) was found for the first time in many lettuce‐growing areas of Austria and Germany. The causal agent, a new pathogenic species called Septoria birgitae, may be responsible for total crop loss. To study how temperature, inoculum density and leaf wetness period influence disease incidence and severity of leaf spot on lettuce caused by S. birgitae, we carried out in vivo experiments in growth chambers and in the field. Additionally, we evaluated the relevance of infected plant debris acting as a primary inoculum source in soil for subsequent crops. S. birgitae produces spores over a wide temperature range between 5°C and 30°C, and can infect plants at temperatures between 10°C and 30°C, with an optimum between 20°C and 30°C. Spores of S. birgitae at a density of at least 10³ conidia mL^–1 are essential for disease outbreak on lettuce. Because leaf wetness is crucial for releasing conidia from pycnidia, we studied the impact of leaf wetness duration on disease development under various temperature conditions. For relevant leaf spot disease development on lettuce in vivo, a leaf wetness duration of at least 24 h and temperatures higher than 10°C were necessary. Leaf spot disease development in the field required several leaf wetness periods longer than 20 h at approximately 15°C at the beginning of crop cultivation. Incorporating S. birgitae infected plant debris in soil as a primary inoculum was not relevant for leaf spot disease outbreak in the next year. However, in cases of continuous cropping of lettuce on the same field and in the same season, Septoria‐infected lettuce debris may become more relevant.     

Leaf surface wetness in sorghum and resistance to shoot fly, Atherigona soccata: role of soil and plant water potentials

In experiments with potted plants, the relationships between soil matric potential, plant water potential and production of water droplets (leaf surface wetness) on the folded central whorl leaf of seedlings of sorghum genotypes that are either resistant or susceptible to shoot fly (Atherigona soccata) damage were investigated. Differences in soil matric potentials in the pots affected the plant water status, which in turn had profound effects on the production of water droplets on the central whorl leaf of the sorghum genotype susceptible to shoot fly. There was no consistent variation in the relationship between plant water potential and soil matric potential of resistant and susceptible sorghum genotypes. However, there was very little or practically no water droplets on the central whorl leaf of the resistant genotypes, indicating that the production of water droplets is not solely the result of internal water status of the plant. It is suggested that leaf surface wetness is genetically controlled and that an understanding of the mechanism by which water is transferred to the leaf surface will enhance breeding for resistance to shoot fly.     

Effects of Ozone Exposure on Resistance of Wheat Genotypes to Pyrenophora tritici-repentis

Three spring wheat genotypes, susceptible, moderately resistant or resistant to Pyrenophora tritici-repentis (tan spot fungus) were exposed to charcoal-filtered air and to approx. 80, 160, 240 (g m^?3 ozone for five consecutive days (7 h per day). Visible leaf injury on seedling plants (three-leaf stage) was only observed after fumigation with 160 or 240 (g m^?3 O₃. Amount of injury was four-fold and 10-fold on the susceptible genotype when compared to resistant or moderately resistant genotype at the two highest concentration of ozone, respectively. Genotypic differences to O₃ tolerance were detected at the seedling growth stage (three-leaf stage) and flowering stage but not at the stem elongation stage. A significant increase in tan spot lesion area was observed only on O₃ predisposed second top most leaves of the susceptible genotype at all the three levels of ozone. Predisposition did not enhance tan spot development in resistant and moderately resistant genotypes. In a test with 12 wheat genotypes, a highly significant positive correlation (r = 0· 986, p < 0· 0001) was observed between ozone sensitivity (percent leaf area damaged due to 240 (g m^?3 ozone exposure) and tan spot development (mm² lesion area) following inoculation with P. tritici-repentis. It indicates that wheat genotypes resistant to the tan spot fungus might be tolerant to ozone damage.     

Effects of inoculum concentration, leaf age and wetness period on the development of dark leaf and pod spot (Alternaria brassicae) on oilseed rape (Brassica napus)

Experiments were done under controlled environment and glasshouse conditions to study the effects of inoculum concentration, leaf age and wetness period on the development of dark leaf and pod spot (Alternaria brussicae) on oilseed rape (Brassica napus). On leaves of potted oilseed rape plants (cv. Bienvenu) inoculated with A. brassicae conidial suspensions, the severity (number of lesions cm^-2) of dark leaf spot increased as inoculum concentration increased from 80 to 660 spores ml^-1and as leaf age increased from 4 to 14 days. On pods on detached racemes of spring oilseed rape (cv. Starlight), the incidence of dark pod spot (% of pods diseased) increased as inoculum concentration increased from 80 to 10⁴spores ml^-1. Increasing inoculum concentration above 10⁴spores ml^-1did not increase the incidence but did increase the severity of dark pod spot. A minimum wetness period of 4 h was needed for infection of oilseed rape leaves (cv. Envol) by A. brussicue at 18°C and disease severity increased with increasing wetness period up to 12 h. The length of dry interruptions after 3–8 h of initial wetness affected the severity of dark leaf spot. A second wetness period increased the severity of dark leaf spot if the dry interruption was ≤ 6 h and if the first wetness period was ≤ 8 h. The incubation period of A. brassicae decreased from 3.5 to 2.5 days as inoculum concentration increased from 80 to 660 spores ml^-on leaves (cv. Bienvenu) at 17–25°C and from 3.8 to 1.0 day as inoculum concentration increased from 80 to ≥2 ≥ 10³spores ml^-1on pods (cv. Starlight) at 18°C.     

Germination of Erysiphe gratninis f.sp. hordei conidia on barley leaves

Germination of Erysiphe graminis f.sp. hordei conidia on leaves of several barley cultivars was studied in the laboratory. On both detached leaves and intact plants, within 48 h of inoculation a higher proportion of conidia had germinated on the basal and middle portions of the adaxial leaf surface than on the corresponding portions of the abaxial surface. Such differences between surfaces were not observed near the leaf tip. Similar results were obtained with all the cultivars and growth stages tested, and with five isolates of E. graminis, and are consistent with the observation that there is usually less powdery mildew on the abaxial than the adaxial surface of barley leaves. With most of the barley genotype/mildew isolate combinations tested, within 48 h of inoculation higher proportions of conidia germinated on seedlings and juvenile plants than on older plants. Inherited characteristics which affect spore germination on the leaf surface may be important factors in the development of adult-plant resistance of barley to powdery mildew, particularly in certain genotypes.     

Septoria Leaf Spot of Stevia rebaudiana in Canada and Methods for Screening for Resistance

The herb Stevia rebaudiana is a potential source of low-calorie sweeteners. In 1995, a severe leaf spot and blight was observed in stevia production fields and research plots in the provinces of Ontario and British Columbia, Canada. The disease was characterized by angular, shiny, olive-grey lesions that rapidly coalesced and were often surrounded by a chlorotic halo. Leaves quickly became necrotic and often dropped off the plant. The disease progressed upwards in the foliage during the growing season. A Septoria sp. was isolated from diseased leaves. Ten isolates (five from each of the two provinces) of the Septoria sp. were compared with respect to conidial size. Across isolates, conidia lengths and widths overlapped (grand means for length and width were 71.4 μm and 1.4 μm, respectively). Conidiogenesis was holoblastic. Morphological characteristics and disease symptoms were similar to those of Septoria steviae, previously reported only from Japan. It was concluded that the Canadian isolates belonged to S. steviae. Isolates from Canada did not differ significantly from one another with respect to effects of temperature on colony growth or germination of conidia. Optimum temperatures for these parameters were between 20 and 25°C. In field trials, the pathogen was shown to successfully over-winter in diseased leaf tissue. In order to develop procedures for identification of resistant germplasm and greenhouse screening of candidate fungicides, effects of leaf wetness period, inoculum concentration, and plant age on disease development were determined. Thirty-six hours of leaf wetness were required for consistent development of leaf spots. Inoculum concentrations of 5 × 10⁵ conidia/ml or more were required to produce high disease severities; 6-week-old plants were more susceptible than older plants. In the growth chamber, greenhouse, and field trials, germplasm selections with high levels of resistance to S. steviae were identified. This is the first report of resistance to this disease in S. rebaudiana.     

Some factors influencing spore germination and penetration of Alternaria longipes

The ranges over which the germination of conidia of Alternaria longipes was > 50% were 10–35 °C on agar and 15–30 °C on tobacco leaf disks. Germination was optimal at 22.5 °C; so was germ-tube growth, reaching c. 300 and 102 μm on agar and leaf disks respectively after 12 h. On average, 27% more conidia germinated and germ-tubes were 62% longer on disks from leaves washed for 5 min under running water than on disks from unwashed leaves. At controlled saturation deficits germination after 8 h at 1.1 and 2.3 mb was 42.3 and 9.3% respectively and the rate of germ-tube growth was < 0.8 μm/h, compared with 94.4% and 8.3 μm/h in standing water. These results, together with some field data, suggests that germination in the field is largely restricted to periods when free moisture is present on leaves. In Malawi, leaf temperatures and the duration of dew at night were adequate to allow germination and penetration in the absence of rain. Pollen, when applied with the inoculum, had little effect on the number of germinated conidia, but caused a c. tenfold increase in the number of successful penetrations.     

Resistance in sorghum to the shoot fly, Atherigona soccata: epicuticular wax and wetness of the central whorl leaf of young seedlings

Sorghum genotypes known to be resistant or susceptible to shoot fly, Atherigona soccata Rondani were examined by scanning electron microscopy for differences in epicuticular wax structure and wetness of the central leaf whorl. Two major types of wax structures were observed: shoot fly resistant and moderately resistant genotypes were characterised by a smooth amorphous wax layer and sparse wax crystals while susceptible genotypes possessed a dense meshwork of crystalline epicuticular wax. The density of wax crystals decreased from the third leaf to the seventh leaf stage and was related to both seedling age and leaf position. Water droplets on susceptible genotypes with dense wax crystals showed spreading at the edges indicating a tendency to wet easily. In resistant genotypes with less dense wax crystals the droplets remained intact and did not spread.     

Arachidonic acid-induced hypersensitive cell death as an assay of downy mildew resistance in pearl millet

Arachidonic acid (AA) induces hypersensitive response (HR) on coleoptile/root regions of two-day-old pearl millet seedlings. The response is comparable to the HR induced by the downy mildew pathogen, Sclerospora graminicola. A time gap in the appearance of cell necrosis among genotypes of pearl millet was related to the degree of resistance to downy mildew. Based on the time required for the development of necrotic spots induced by AA, the pearl millet genotypes were categorised as highly resistant/resistant (HR in 3–6 h), susceptible (HR in 7–12 h) and highly susceptible (HR in 13 h and above). The percentage disease incidence in each genotype was compared with the time required for the development of AA-induced HR. The appearance of hypersensitive cell necrosis was rapid in genotypes having high resistance to downy mildew and was slow in genotypes with high susceptibility. This simple method of screening various pearl millet genotypes in the absence of the pathogen aids in identifying the downy mildew resistant/susceptible host cultivars without the risk of introducing the virulent race of the pathogen.     

Temperature and Leaf Wetness Effects on Infection of Sugarcane by Puccinia melanocephala

Brown rust epidemics in sugarcane, caused by Puccinia melanocephala, vary in severity between seasons. To improve the understanding of disease epidemiology, the effects of leaf wetness, temperature and their interaction on infection of sugarcane by the pathogen were studied under controlled conditions. Disease severity was low at 15 and 31°C regardless of leaf wetness duration. No infection occurred with a 4‐h leaf wetness period. Increasing leaf wetness duration from 7 to 13 h lowered the temperature required for disease onset from 21 to 17°C. More infection occurred with 13 compared to 10 h of leaf wetness at 17°C, and severity decreased for all leaf wetness periods at 29 compared to 27°C. Postinfection suboptimal low and high temperatures increased the time required for lesion development and high temperatures decreased maximum disease severity. The observed effects of leaf wetness and temperature on infection by P. melanocephala could help explain the initiation, rate of increase and decline of brown rust epidemics in the field.     

Interaction of NaCl and Cd stress on compartmentation pattern of cations,antioxidant enzymes and proteins in leaves of two wheat genotypes differing in salt tolerance

Physiological mechanisms of salinity–Cd interactions were investigated in inter- and intracellular leaf compartments of salt-tolerant wheat × Lophopyrum elongatum (Host) A. Löve (syn. Agropyron elongatum) amphiploid and its salt-sensitive wheat parent (Triticum aestivum L. cv Chinese Spring). In comparison with the intracellular fluid, only very low Na⁺ concentrations (up to about 4 mM) were found in the intercellular leaf compartment of wheat after a 75 mM supply of NaCl. NaCl salinity led to a higher Cd concentration in leaves of the salt-sensitive genotype. Cd in the intercellular leaf compartment was not detectable. Higher K⁺ concentrations in the intercellular leaf compartment of the salt-sensitive genotype suggest a higher plasma membrane permeability caused by NaCl + Cd stress. Ascorbate peroxidase (APX) activity was increased in leaves of the salt-sensitive genotype under the combined NaCl and Cd stress. The highest non-specific peroxidase activities were detected under the combined stresses. It is suggested that NaCl and Cd stress in combination enhance the production of oxygen radicals and H₂O₂, especially in leaves of the salt-sensitive genotype. As a consequence, disturbed membrane function may cause elevated Cd concentrations in the intracellular leaf compartment under salinity. Cd did not change protein concentration and pattern in leaves. The protein content in inter-and intracellular leaf compartments of both genotypes was increased under salinity. A different protein pattern was obtained in inter- and intracellular leaf compartments. Thus, several physiological interactions between NaCl stress and Cd were found in the two wheat genotypes.     

Use of a Mini-Dome Bioassay and Grafting to Study Resistance of Chickpea to Ascochyta Blight

A mini‐dome bioassay was developed to study pathogenicity of Ascochyta rabiei and relative resistance of chickpea (Cicer arietanium). It was determined that the best condition for assaying pathogenicity of A. rabiei was to use 2 × 10⁵ spores/ml as inoculum and to maintain a leaf wetness period of 24 h under mini‐domes at a temperature between 16 and 22°C. This mini‐dome pathogenicity assay was used to determine relative resistance of six chickpea cultivars (cvs) to isolates of two pathotypes of A. rabiei. Grafting was employed to detect any translocated factors produced in the chickpea plant that mediate disease response, which could help elucidate possible resistance mechanisms to Ascochyta blight. The six chickpea cv. were grafted in all possible scion–rootstock combinations, and then inoculated with isolates of two pathotypes of A. rabiei using the mini‐dome technique. Results showed that self‐grafted‐resistant plants remained resistant and self‐grafted‐susceptible plants stayed susceptible, indicating the grafting procedure did not alter host response to infection by A. rabiei. Susceptible scions always exhibited high and similar levels of disease severity regardless of rootstock genotypes, and resistant scions always showed low and similar levels of disease severity when they were grafted onto any of the six rootstock genotypes. Orthogonal contrasts showed that scion genotypes determined disease phenotype, and that rootstock genotypes had no contribution to disease phenotype of the scions. The pathogenicity assay did not detect any translocated disease‐mediating agents responsible for susceptibility or resistance in chickpea. Disease phenotypes of Ascochyta blight of chickpea were conditioned locally by scion genotypes.     

Morphophysiological and biochemical attributes influence intra-genotypic preference of shoot fly [Atherigona soccata (Rondani)] among sorghum genotypes

Shoot fly [Atherigona soccata (Rondani)] is a destructive pest of sorghum at the seedling stage and causes huge losses to grain yield and green fodder. The host-plant resistance mechanism is the best approach to reduce the attack of insects in plants. The damage parameters, morphophysiological traits, and biochemical metabolites had been investigated in the leaves and stem of contrasting sorghum genotypes, viz., resistant (IS18551, ICSV705, ICSV700), moderately resistant (PSC-4), and susceptible (SWARNA and SL-44) at 15 and 21 days after emergence (DAE) against shoot fly infestation. The resistant genotypes recorded lowest shoot fly oviposition and incidence (0.3–0.7 eggs plant⁻¹ and 10–15%) than the susceptible genotypes (2.4–3.0 eggs plant⁻¹ and 70–80%), respectively. The susceptible genotype SWARNA recorded 50% and 80% higher deadheart formation than the resistant genotype IS18551 at 15 and 21 DAE, respectively. Resistant genotypes exhibited higher trichome density at adaxial and abaxial part of leaf (118–145 and 106–131) with pink colored leaf sheath (scale 1.50–3.25), glossy leaves (scale1.00–1.25), and lower leaf surface wetness (scale1.25–2.00) compared with susceptible genotype with 49.3–73.3 and 25.3–64.0, scale 2.50–4.00, scale 2.75–3.50, and scale 3.25–4.25 for the respective parameters. Another defense response of sorghum toward the insect attack was modulation of plant metabolism. The infested genotypes responded to insect attack by upregulation of total soluble sugar, total phenol, prussic acid, and chlorophyll content by 1.2–2.1-fold, 1.5–2.0-fold, 1.2–1.3-fold, and 1.2–3.9-fold with more induction in susceptible genotypes at 21 DAE. On the whole, the present study indicates that morphophysiological and biochemical attributes contribute toward the resistance mechanism in sorghum against shoot fly infestation.

     

Phenylalanine ammonia-lyase activity in alfalfa suspension cultures treated with conidia and elicitors of Verticillium albo-atrum

Alfalfa (Medicago sativa L.) cell suspension cultures of Verticillium albo-atrum resistant and susceptible genotypes were established from leaf callus tissues. Treatment of cultures with conidia and heat-released elicitors of V. albo-atrum induced a large increase in the activity of phenylalanine ammonia-lyase, only in the cells of the resistant genotypes with a maximum after 12 h. In co-cultivation with the fungal conidia and resistant cell lines, the production of spores were inhibited. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effects of light, temperature, gibberellin (GA3) and their interaction on coleoptile and leaf elongation of tall, semi-dwarf and dwarf wheat

Near-isogenic wheat lines differing in height-reducing (Rht) alleles, in each of two cultivars, were used to investigate the effects of light intensity and of their interaction with temperature and GA₃ application, on the elongation of the coleoptile and the first seedling leaf. Darkness caused a conspicuous increase in the lengths of the coleoptile and of the sheath and lamina of the first leaf, in GA₃ treated and untreated seedlings of all genotypes grown at 11 and 25°C. The genotype effects and the effects of light intensity and GA₃ application on leaf length were ascribed entirely to their effects on the rate of leaf elongation since the duration of leaf elongation was not affected by these factors. Temperature elevation from 11 to 25°C caused a 55% shortening of the duration of leaf elongation and a concomitant increase in elongation rate, which diminished with increased genotypic dwarfness. Accordingly, temperature elevation resulted in a significant reduction in leaf-length of the light-grown dwarf genotypes and the dark-grown dwarf and semi-dwarf genotypes. It is suggested that this temperature × light × genotype interaction effect is due to environmental dependent upper limits of elongation rate set by the Rht alleles.Abbreviations PAR Photosynthetic Active Radiation     

Vertical patterns and duration of surface wetness in an old-growth tropical montane forest, Indonesia

In tropical montane forests, the wetness of leaf surfaces is an important parameter which may influence gas exchange, growth and vitality of leaves, and forest productivity. Thirty surface wetness sensors were operated during May–August 2004 in a vertical profile inside an old-growth lower montane rain forest of Central Sulawesi, Indonesia, with the objective to analyse spatial and temporal patterns of surface wetness and to relate wetness duration to the microclimate inside the stand. The canopy was wet during 25–30% of time in this study period. In a dry period, however, surface wetness lasted for only 5% of the time, whereas the canopy was wet during 45–55% of the time in a rainy period. In the lower shade canopy, surface wetness continuously existed for periods of up to 22 h and more, although rainfall occurred only during afternoon thunderstorms of limited duration. The long duration of surface wetness has implications for forest interception models, which assume a complete drying of the canopy between subsequent rainfall events. In periods with rainfall, leaf wetness typically occurred in the afternoon, evening and first half of the night because intercepted water persisted on the leaves until about midnight. In dry periods, in contrast, surface wetness was mainly caused by dewfall in the second half of the night, and it occurred mainly in the uppermost canopy where radiative heat losses resulted in a substantial under-cooling of the leaves. Ecophysiological and hydrological importance is suggested by the long duration of surface wetting in this stand with possible implications for gas exchange, leaf growth, leaf colonization by epiphylls and the forest water balance.     

Prepenetration Stages of Guignardia psidii in Guava: Effects of Temperature, Wetness Duration and Fruit Age

This study examined the effects of temperature and wetness duration in vitro and in vivo as well as the effects of fruit age on germination and appressoria formation by conidia of Guignardia psidii , the causal agent of black spot disease in guava fruit. The temperatures tested for in vitro and in vivo experiments were 10, 15, 20, 25, 30, 35 and 40°C. The wetness periods studied were 6, 12, 24, 36 and 48 h in vitro and 6, 12 and 24 h in vivo . Fruit 10, 35, 60, 85 and 110-days old were inoculated and maintained at 25°C, with a wetness period of 24 h. Temperature and wetness duration affected the variables evaluated in vitro and in vivo . All variables reached their maximum values at between 25 and 30°C with a wetness duration of 24 h in vivo and 48 h in vitro . These conditions resulted in 31.3% conidia germination, 33.6% appressoria formation and 32.5% appressoria melanization in vitro , and 50.4% conidia germination and 9.5% appressoria formation in vivo . Fruit age also influenced these factors. As fruit age increased, conidia germination and appressoria formation gradually increased. Conidia germination and appressoria formation were 10.8% and 2.3%, respectively, in 10-day-old fruits. In 110-day-old fruits, conidia germination and appressoria formation were 42.5% and 23.2% respectively.     

Powdery mildew of tobacco (Erysiphe cichoracearum DC)

A Hirst volumetric spore trap, at a height of 30 cm., was used to assess the diurnal distribution of Erysiphe conidia in the air in tobacco crops infected with E. cichoracearum in Rhodesia. Air temperature and humidity, and the length of time leaves were wet each day, were also recorded at the same height, amongst the plants. In four seasons, most conidia were caught between 13.00 and 15.00 hr. There were close positive correlations in 1962 between numbers of conidia per m.3 of air per hour and saturation deficit and air temperature during the same hours (10.00–18.00 hr.) Correlations of total Erysiphe conidia per day with temperature and humidity were very variable; temperature had no apparent effect during three seasons, but in one (1961)there was a highly significant positive correlation between numbers of conidia and the daily duration of temperatures > 25d? C. More conidia were also caught when the air was dry for long periods that season, though temperature probably had the greater effect. In 1962, more conidia were caught per day the longer the air was humid (s.D. 0–1 mb.) In 1961, the amount of rain per day had no apparent effect on numbers of conidia, but in 1962 more were caught the greater the daily rainfall. However, rain, which nearly always fell in the afternoon, also removed most conidia from the air that afternoon. Neither windspeed nor duration of leaf wetness appeared to affect spore dispersion.     

Media and culturing protocol using a full 25 factorial design for the production of submerged aggregates by the potential bio-herbicide Plectosporium alismatis against weed species of Alismataceae

The potential bio-herbicide Plectosporium alismatis produces drying and UV tolerant micro-sclerotia-like structures named aggregates, effective against the weed Alisma plantago-aquatica. In this study, we evaluated (i) optimal liquid culture conditions that supported the high dry weight, conidia and aggregate yields and (ii) stress-tolerance and effectiveness of aggregates. Using a full factorial 2⁵ design, we studied the impact of agitation (A), glucose concentration (B), Tween 80 concentration (C), malt extract concentration (D), and inoculum density (E), on P. alismatis growth yields. The inoculum density (E), the agitation rate (A), and 3-factor interactions involving E and/or A had significant effects on aggregate yields (average 213 aggregates mL^?1; main effect of E: +112.87; main effect of A: ?74.81), but no significant effect on conidial yields and dry weight. The agitation was maintained at 100?rpm and increasing numbers of conidia were inoculated into the culture media. Maximal aggregate yields (3.6?×?10³ aggregates mL^?1) were obtained with an initial conidial density of 4?×?10⁶ conidia mL^?1. While freshly-harvested, dried and/or UV exposed aggregates germinated at high rates (respectively: 100%; 99%; 76%; 85%), sporogenesis significantly decreased after stress exposure. In bioassays using leaf discs of A. plantago-aquatica, chlorosis and/or necrosis was observed after 8 days incubation, regardless of whether aggregates had been exposed to desiccation and/or UV-radiations prior to application on leaf discs. These data provide a cultural protocol for the production of high numbers of UV and drying resistant aggregates effective against weed species of Alismatacae.