Histone deacetylase complexes: functional entities or molecular reservoirs

Using the dextran-binding domain (DBD) of a type of glucosyltransferase (GTF) from Streptococcus sobrinus, we have developed a novel method for purifying recombinant proteins. DBD-tagged green and red fluorescent proteins as well as the parent GTF and DBD moiety were adsorbed well to commercially available cross-linked dextran (such as Sephadex beads and Sephacryl beads), and eluted efficiently with water-soluble dextran. The purity of the eluted proteins after this one-step affinity purification was 90% or better. The results suggest that DBD can be used as a powerful carrier for purification of various recombinant proteins.     

Efficient removal of albumin from human serum by monosize dye-affinity beads

Cibacron Blue F3GA was covalently attached onto monosize poly(glycidyl methacrylate) [poly(GMA)] beads for removal of human serum albumin (HSA) from human serum. Monosize poly(GMA) beads, 1.6 microm in diameter, were produced by dispersion polymerization. Cibacron Blue F3GA loading was 1.73 mol/g. HSA adsorption experiments were performed by stirred-batch adsorption. The non-specific adsorption of HSA was low (0.8 mg/g polymer). Dye attachment onto the monosize beads significantly increased the HSA adsorption (189.8 mg/g). The maximum HSA adsorption was observed at pH 5.0. With an increase of the aqueous phase concentration of sodium chloride, the adsorption capacity decreased drastically. The equilibrium adsorption of HSA significantly decreased with increasing temperature. The elution studies were performed by adding 0.1 M Tris/HCl buffer containing 0.5 M NaSCN to the HSA solutions in which adsorption equilibria had been reached. The elution results demonstrated that the adsorption of HSA to the adsorbent was reversible. The depletion efficiencies for HSA were above 87% for all studied concentrations. To test the efficiency of HSA removal from human serum, proteins in the serum and eluted portion were analyzed by two-dimensional gel electrophoresis. Eluted proteins include mainly albumin, and a small number of nonalbumin proteins such as apo-lipoprotein A1, sero-transferrin, haptoglobulin and alpha1-antitrypsin were bound by the dye-affinity beads. IgA was not identified in eluted fraction.     

Single-step purification of recombinant Thermus aquaticus DNA polymerase using DNA-aptamer immobilized novel affinity magnetic beads

A DNA aptamer specific for Thermus aquaticus DNA polymerase (Taq-polymerase) was immobilized on magnetic beads, which were prepared in the presented study. The effect of various parameters including pH, temperaturem and aptamer concentration on the immobilization of 5'-thiol labeled DNA-aptamer onto glutaric dialdhyde activated magnetic beads was evaluated. The binding conditions of Taq-polymerase on the aptamer immobilized magnetic beads were studied using commercial Taq-polymerase to characterize the surface complexation reaction. Efficiency of affinity magnetic beads in the purification of recombinant Taq-polymerase from crude extracts was also evaluated. For this case, the enzyme "recombinant Taq-DNA polymerase" was cloned and expressed using an Amersham E. coli GST-Gene Fusion Expression system. Crude extracts were in contact with affinity magnetic beads for 30 min and were collected by magnetic field application. The purity of the eluted Tag-polymerase from the affinity beads, as determined by HPLC, was 93% with a recovery of 89% in a one-step purification protocol. Apparently, the system was found highly effective as one step for the low-cost purification of Taq-polymerase in bacterial crude extract.     

Purification of human and avian influenza viruses using cellulose sulfate ester (Cellufine Sulfate) in the process of vaccine production

Affinity chromatography using sulfated, spherical cellulose beads (Cellufine Sulfate) was assessed for purification of influenza A and influenza B viruses. Recovery rates of viruses eluted from the beads were high for all tested virus strains. This method was also useful for removing chicken egg-derived impurities from allantoic fluids containing influenza viruses; the hemagglutination activity per amount of protein in the eluted sample was significantly higher than that in the applied sample. These results suggest that use of Cellufine Sulfate is a practical method for primary purification of influenza viruses in the process of influenza vaccine production.     

Poly(glycidylmethacrylate) brushes generated on poly(VBC) beads by SI-ATRP technique: Hydrazine and amino groups functionalized for invertase adsorption and purification

Crosslinked-poly(vinylbenzylchloride), poly(VBC), beads were prepared by suspension polymerization and poly(glycidylmethacrylate) was grafted by surface-initiated-atom radical polymerization (SI-ATRP) technique. Epoxy groups of the grafted poly(GMA) were reacted with hydrazine and ammonia to create an affinity binding sites. The hydrazine and amine functionalized poly(VBC-g-GMA) beads were used as an affinity support for adsorption of invertase from solution and yeast crude extract. The influence of pH, equilibrium time, ionic strength and initial invertase concentration on the adsorption capacities of both hydrazine and amine functionalized beads has been investigated. Maximum invertase adsorptions onto hydrazine and amine functionalized beads, were 86.7 and 30.4 mg/g at pH 4.0 and 5.5, respectively. The experimental equilibrium data fitted well to the Temkin isotherm model. Finally, the hydrazine functionalized poly(VBC-g-GMA) beads were used for the purification of invertase from crude yeast extract in a batch system and the purity of the eluted invertase from the hydrazine functionalized beads was determined as 92% by HPLC from single step purification protocol.     

Structure of dried cellular alginate matrix containing fillers provides extra protection for microorganisms against UVC radiation

Soil microorganisms in general and biocontrol agents in particular are very sensitive to UV light. The packaging of biocontrol microorganisms into cellular solids has been developed as a means of reducing loss caused by exposure to environmental UV radiation. The bacterial and fungal biocontrol agents Pantoea agglomerans and Trichoderma harzianum were immobilized in freeze-dried alginate beads containing fillers and subjected to 254 nm UV radiation (UVC). Immobilization of cells in freeze-dried alginate-glycerol beads resulted in greater survival after UV irradiation than for a free cell suspension. Adding chitin, bentonite or kaolin as fillers to the alginate-glycerol formulation significantly increased bacterial survival. Immobilization in alginate-glycerol-kaolin beads resulted in the highest levels of survival. The transmissive properties of the dried hydrocolloid cellular solid had a major influence on the amount of protection by the cell carrier. Dried alginate matrix (control) transmitted an average of 7.2% of the radiation. Filler incorporation into the matrix significantly reduced UV transmission: Alginate with kaolin, bentonite and chitin transmitted an average of 0.15, 0.38 and 3.4% of the radiation, respectively. In addition, the filler inclusion had a considerable effect on the bead's average wall thickness, resulting in a approximately 1.5- to threefold increase relative to beads based solely on alginate. These results suggest that the degree of protection of entrapped microorganisms against UVC radiation is determined by the UV-transmission properties of the dried matrix and the cellular solid's structure. It is concluded that for maximum protection against UV-radiation-induced cell loss, biocontrol microorganisms should be immobilized in alginate-glycerol beads containing kaolin.     

Monosize poly(glycidyl methacrylate) beads for dye-affinity purification of lysozyme

Cibacron Blue F3GA was covalently attached onto monosize poly(glycidyl methacrylate) [poly(GMA)] beads for purification of lysozyme from chicken egg white. Monosize poly(GMA) beads, 1.6 microm in diameter, were produced by a dispersion polymerization technique. The content of epoxy groups on the surface of the poly(GMA) sample determined by the HCl-pyridine method (3.8 mmol/g). Cibacron Blue F3GA loading was 1.73 mmol/g. The monosize beads were characterized by elemental analysis, FTIR and SEM. Adsorption studies were performed under different conditions in a batch system (i.e., medium pH, protein concentration, temperature and ionic strength). Maximum lysozyme adsorption amount of poly(GMA) and poly(GMA)-Cibacron Blue F3GA beads were 1.6 and 591.7 mg/g, respectively. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium adsorption capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the adsorption process. It was observed that after 10 adsorption-elution cycle, poly(GMA)-Cibacron Blue F3GA beads can be used without significant loss in lysozyme adsorption capacity. Purification of lysozyme from egg-white was also investigated. Purification of lysozyme was monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. The purity of the eluted lysozyme was analyzed by SDS-PAGE and found to be 88% with recovery about 79%. The specific activity of the eluted lysozyme was high as 43,600 U/mg.     

Affinity apheresis for treatment of bacteremia caused by Staphylococcus aureus and/or methicillin-resistant S. aureus (MRSA)

Staphylococcus aureus (SA) bacteremia is associated with high mortality, and often results in metastatic infections. The methicillin-resistant SA (MRSA) is an urgent health care issue, as nosocomial infections with these bacteria represent limited treatment alternatives. Samples of whole blood containing challenge inoculums of SA and MRSA strains were passed through columns packed with surface-heparinized polyethylene beads. The bound bacteria were eluted and quantitatively determined by culturing and by real-time PCR. Significant amounts of both SA and MRSA adhered to the heparinized beads (more than 65% of inoculated bacteria). After rinsing with buffer at high ionic strength, viable bacteria or bacterial DNA were eluted from the columns, indicating that the binding was specific. The conclusions that can be made from these experiments are that, as earlier reported in the literature, the high affinity of SA to heparin is retained in whole blood, and MRSA in whole blood binds to heparin with similar or higher affinity than SA. It should be possible to lower the amount of SA and/or MRSA from the blood of infected patients to levels that could be taken care of by the immune system. In previous studies, we have shown that passing blood from septic patients over beads coated with end-point-attached, biologically active heparin is a useful technique for regulating the levels of heparin-binding cytokine. These findings in combination with the present findings indicate the possibility of creating an apheresis technology for treatment of sepsis caused by SA and/or MRSA.     

Co-immobilized Nitrosomonas europaea and Nitrobacter agilis cells: validation of a dynamic model for simultaneous substrate conversion and growth in kappa-carrageenan gel beads

A dynamic model for two microbial species immobilized in a gel matrix is presented and validated with experiments. The model characterizes the nitrification of ammonia with Nitrosomonas europaea and Nitrobacter agilis co-immobilized in K-carrageenan gel beads. The model consists of kinetic equations for the microorganisms and mass transfer equations for the substrates and products inside and outside the gel beads. The model predicts reactor bulk concentrations together with the substrate consumption rate, product formation, and biomass growth inside the gel beads as a function of time. A 50-day experiment with immobilized cells in a 3.3-dm(3) air-lift loop reactor was carried out to validate the model. The parameter values for the model were obtained from literature and separate experiments. The experimentally determined reactor bulk concentrations and the biomass distribution of the two microorganisms in the gel beads were well predicted by the model. A sensitivity analysis of the model for the given initial values indicated the most relevant parameters to be the maximum specific growth rate of the microorganisms, the diffusion coefficient of oxygen, and the radius of the beads. The dynamic model provides a useful tool for further study and possible control of the nitrification process. (c) 1994 John Wiley & Sons, Inc.     

Kappa-carrageenan/gelatin gel beads for the co-immobilization of aerobic and anaerobic microbial communities degrading 2,4,6-trichlorophenol under air-limited conditions

Alginate and kappa-carrageenan gels were tested as bead materials for the co-immobilization of anaerobic and aerobic microorganisms for the mineralization of 2,4,6-trichlorophenol under air-limited conditions. Chemical, mechanical and thermal culture constraints were pre-defined and the gel resistances were established. Alginate was quickly eliminated because of its chemical instability in the culture media. In anaerobic conditions, the microorganisms transformed the substrates into CH4 and CO2. The kappa-carrageenan gel did not enable these gases to diffuse. They remained as bubbles in the core of the beads and made the beads float. Gelatin was added to kappa-carrageenan in order to change the carrier properties. No biogas bubbles appeared in the bead core during the cultures in anaerobic conditions and the beads reacted well to the culture conditions in the reactor. The co-immobilization of the anaerobic and aerobic microbial communities was successfully performed with the kappa-carrageenan/gelatin gel (2% (w/w) of each polymer). The biological activities, measured by the impedancemetry technique, were preserved in the beads.     

Ethanol production from starch by a coimmobilized mixed culture system of Aspergillus awamori and Zymomonas mobilis

The production of ethanol from starch by a coimmobilized mixed culture system of aerobic and anaerobic microorganisms in Ca-alginate gel beads was investigated. The mold Aspergillus awamori was used as an aerobic amylolytic microorganism and an anaerobic bacterium, Zymomonas mobilis, as an ethanol producer. By controlling the mixing ratio of the microorganisms in the inoculum size, a desirable coimmobilized mixed culture system, in which the aerobic mycelia grew on and near the oxygen-rich surface of the gel beads while the anaerobic bacterial cells mainly grew in the oxygen-deficient central part of the gel beads, was naturally established under the aerobic culture conditions, and ethanol could be directly produced from starch by the system. The ethanol productivity by the system in flask culture was particularly affected by the shear stress (dependent on the shaking speed) which controlled the mycelial growth on the surface of the gel beads. Under optimum culture conditions in the flask culture, the glucose produced was instantly consumed, and was not observed in the culture broth; the final concentration of ethanol produced from 100 g/L starch was 25 g/L and the yield coefficient for ethanol, Y(pls), was 0.38. The ethanol productivity by the coimmobilized mixed culture system was compared with those by other various culture systems and the advantages of the system were clarified.     

Preparation and characterization of mixed-mode magnetic adsorbent with p-amino-benzamidine ligand: Operated in a magnetically stabilized fluidized bed reactor for purification of trypsin from bovine pancreas

The magnetic beads were synthesized using glycidylmethacrylate (GMA) and methylmethacrylate (MMA) monomers. A multimodal ligand (i.e., p-amino-benzamidine) was covalently immobilized onto magnetic beads after glutaraldehyde activation, and consequently used for purification of the trypsin from bovine pancreas. The p-amino-benzamidine ligand immobilized magnetic beads were characterized by FTIR, VSM, SEM, and analytical methods. Trypsin adsorption experiments were investigated under different experimental conditions (i.e., medium pH, initial trypsin concentration, temperature, and ionic strength) in a batch system. Maximum trypsin adsorption capacity was found to be 75.9 ± 2.6 mg/g beads. Adsorbed trypsin was eluted by using (0.1 M acetate buffer, pH 3.0) with a 97% recovery. The purification factor of trypsin from crude pancreas extract was 8.7 folds. The purity of the eluted trypsin from p-amino-benzamidine functionalized magnetic beads was determined as 86% by HPLC. The method developed in this report was successfully applied for purification of the trypsin from crude pancreas extract in a magnetically stabilized fluidized bed reactor.     

Ethanol production from starch by a coimmobilized mixed culture system of Aspergillus awamori and Saccharomyces cerevisiae

The development of a coimmobilized mixed culture sys tem of aerobic and facultative anaerobic microorganisms in Ca-alginate gel beads and the production of useful metabolites by the system were investigated. A coimmobilized mixed culture system of Aspergillus awamori (obligate aerobe) and Saccharomyces cerevisiae (facultative anaerobe) in Ca-alginate gel beads was used as a model system, and ethanol production from starch by the system was used as a model production. Mold Asp. awamori is an amylolytic microorganism while yeast S. cerevisiae is an ethanol producer. The two microorganisms grew competitively in the oxygen-rich surface area of the gel beads because they had similar oxygen demands in aerobic culture conditions. Neither microorganism exhibited "habitat segregation" in the gel beads and leaked yeast cells grew aerobically without ethanol production in the broth. Ethanol productivity was low under these conditions.A more desirable coimmobilized mixed culture system of Asp. awamori and S. cerevisiae was established by adding Vantocil IB (a biocidal compound) to the production medium. The antimicrobial activity of Vantocil IB was more effective with S. cerevisiae than with Asp. awamori, so that a dense mycelial layer of Asp. awamori formed in the surface of the gel beads While S. cerevisiae grew densely in the more inner areas of the gel beads. Also, yeast cell leakace was repressed and ethanol productivity was improved. The system with Vantocil IB produced ethanol of 4.5 and 12.3 g/L from 16 and 40 g/L starch, respectively. A continuous culture using this system with Vantocil IB was also carried out, and a stable steady state could be maintained for six days without leakage of yeast cells and contamination. The selection of a factor suitable for producing "habitat segregation" enabled the development of a coimmobilized mixed culture system of an aerobe and a facultative anaerobe. In this study, total habitat segregation was used to denote a tendency to exhibit denser growth in different parts of one gel bead.     

Preparation of alginate-quaternary ammonium complex beads and evaluation of their antimicrobial activity

Alginate-quaternary ammonium complex beads with antimicrobial activity were prepared by the reaction of sodium alginate (SA) with 3-(trimethoxysilyl)propyl-octadecyldimethylammonium chloride (TSA) in acid solution, followed by crosslinking with CaCl(2). FTIR spectroscopy analysis showed that the resulting complex was formed mainly through covalent bonds between the hydroxyl groups of SA and the methoxysilyl groups of TSA. The complex beads exhibited a maximum swelling of 20% in water at 37 degrees C and were not hydrolyzed in water during experiments lasting for 30 days. The in vitro antimicrobial activity of the complex beads was evaluated against four species of bacteria and fungi. The test microorganisms were completely eliminated within 20 min when treated with 5% (v/v) complex beads, which showed a wide spectrum of excellent antimicrobial activity. The antimicrobial activity of the complex beads was retained after 10 cycles of washing and drying. The present results indicate that these SA-TSA complex beads are a new type of insoluble cationic polymer that can kill or remove microorganisms in water by mere contact without releasing the reactive agent.     

Optimization of the nutrient medium composition for directed biosynthesis of Bacillus mesentericus lectins

The medium has been optimized in order to increase the lectin-producing activity of Bacillus mesentericus. When a producer grew on the optimized medium, a 4-8-fold increase of the hemagglutination test titres and a 5.6-fold increase (as compared with the initial medium) of the specific lectin activity of the culture liquid was attained.     

Proteomic analysis of Gal/GalNAc lectin-associated proteins in Entamoeba histolytica

Contact-dependent killing and phagocytosis of target cells by Entamoeba histolytica trophozoites is mediated by the galactose (Gal) and N-acetyl-d-galactosamine (GalNAc)-inhibitable lectin. Previous work has suggested that this lectin functions as part of a signal transduction complex. To identify proteins that might be part of this complex, amebic trophozoites were bound to GalNAc-BSA-labeled magnetic beads and lysed. Bound proteins were eluted from the beads and analyzed by tandem mass spectrometry. Along with the Gal/GalNAc lectin subunits, several cytoskeletal proteins, potential signaling proteins, and a novel transmembrane protein, consistently purified with the GalNAc-BSA beads.     

Amplification of fluorescence with packed beads to enhance the sensitivity of miniaturized detection in microfluidic chip

This paper reports the pre-concentration of C-reactive protein (CRP) antigen with packed beads in a microfluidic chamber to enhance the sensitivity of the miniaturized fluorescence detection system for portable point-of-care testing devices. Although integrated optical systems in microfluidic chips have been demonstrated by many groups to replace bulky optical systems, the problem of low sensitivity is a hurdle for on-site clinical applications. Hence we integrated the pre-concentration module with miniaturized detection in microfluidic chips (MDMC) to improve analytical sensitivity. Cheap silicon-based photodiodes with optical filter were packaged in PDMS microfluidic chips and beads were packed by a frit structure for pre-concentration. The beads were coated with CRP antibodies to capture antigens and the concentrated antigens were eluted by an acid buffer. The pre-concentration amplified the fluorescence intensity by about 20-fold and the fluorescence signal was linearly proportional to the concentration of antigens. Then the CRP antigen was analyzed by competitive immunoassay with an MDMC. The experimental result demonstrated that the analytical sensitivity was enhanced up to 1.4 nM owing to the higher signal-to-noise ratio. The amplification of fluorescence by pre-concentration of bead-based immunoassay is expected to be one of the methods for portable fluorescence detection system.     

Role of integrin beta1-like protein in proliferation and differentiation of cultured stem cells from midgut of Heliothis virescens

Cultured midgut cells from Heliothis virescens larvae were incubated with anti-human integrin beta1 made in rabbit and then passed over a column of magnetic beads bound to anti-rabbit IgG (MACS, Miltenyi Bergisch Gladbach, Germany). Cells bound to integrin beta1 antibody also bound to the anti-rabbit IgG on the magnetic beads (MACS) and were retained in the column while it remained in the magnetic field. Non-bound cells were eluted at this time. They did not stain with anti-integrin antibody just after elution. Removing the column from the magnetic field allowed cells bound to the beads-integrin beta1 antibody to be eluted. All of these cells stained with human anti-integrin beta1 upon elution. Each cell fraction was cultured in medium for 3 days. During this time, the populations of cells tended to return to heterogeneous staining patterns characteristic of control populations. However, cells that did not stain immediately with anti-integrin beta1 antibody exhibited double the rate of multiplication and 8 times more differentiation than the integrin-antibody positive cells that eluted later, as well as the non-treated control cells. In a second experiment, midgut cells were incubated for 4 days with various titers of human anti-integrin beta1 to block surface integrin beta1-like reactive sites. Stem cells blocked with anti-integrin beta1 antibody during incubation exhibited double the rate of differentiation than non-treated control cells and those showing anti-integrin beta1-positive stain upon elution.     

Evaluation of modified chitosan as matrix for hydrophobic interaction chromatography

Chitosan beads were modified with glutaraldehyde and modified chitosan was investigated as matrix for hydrophobic interaction chromatography. The influence of temperature, type of salt and its ionic strength on the adsorption of -galactosidase was studied. -Galactosidase was found to bind in presence of high concentration of ammonium sulphate (3 M, w/v) and 90% of the bound enzyme was eluted with decreasing salt concentration in presence of 10% ethylene glycol. Attempt was made to purify -galactosidase from modified chitosan, -galactosidase showed 1.7-fold purification with 43.96% recovery of enzyme activity. The SDS–PAGE analysis of enzyme showed considerable purification and its molecular weight was found to be 63–64 kDa. Unlike other chromatographic matrices, the prepared chitosan beads were used five times. The results showed that purification and recovery of the enzyme did not change even when column size was increased.     

Rapid and simple detection of food poisoning bacteria by bead assay with a microfluidic chip-based system

A rapid bead assay for detecting pathogenic bacteria with a simple microfluidic chip-based system was developed. Five oligonucleotide probes corresponding to the 16S rRNA of the targeted bacteria were coupled covalently to fluorescent beads. Four species of bacteria (Escherichia coli, Salmonella enterica subsp. enterica serovar Enteritidis, Yersinia enterocolitica, and Bacillus cereus) were used as representative food-borne pathogenic bacteria. The RNAs extracted from pure cultures of these microorganisms were fluorescently labeled and hybridized to the oligonucleotide probes-immobilized fluorescent beads (Bead assay). The duplexes of RNAs and the probes-immobilized beads were analyzed with the commercially available microfluidic chip-based system. This bead assay provided results within 3 h following RNA extraction from bacterial cells.