Production and properties of a biosurfactant synthesized byArthrobacter protophormiae — an antarctic strain

This study reports the production of biosurfactant by a psychrophilic strain ofArthrobacter protophormiae during growth on an immiscible carbon source, w-hexadecane. The biosurfactant reduces the surface tension of the medium from 68.0 mN/m to 30.60 mN/m and exhibits good emulsification activity. The strain could grow and produce biosurfactant in the presence of high NaCl concentrations (10.0 to 100.0 g/1). Although the biosurfactant was isolated by growing the organism under psychrophilic conditions (10‡C) it exhibited stable activity over a wide range of temperature (30‡C to 100‡C). It retained its surface-active properties at p^H2 to 12. The biosurfactant was effective in recovering up to 90% of residual oil from an oil saturated sandpack column, indicating its potential value in enhanced oil recovery.     

Effects of biosurfactants produced by Candida antarctica on the biodegradation of petroleum compounds

The effects of biosurfactants on the biodegradation of petroleum compounds were investigated. Candida antarctica T-34 could produce extracellular biosurfactant mannosylerythritol lipids (MELs) when it was cultured in vegetable oil. In addition, in our previous study, it was found that this strain could also produce a new type of biosurfactant while it grew on n-undecane (C₁₁H₂₄), and the biosurfactant was named as BS-UC. In flask culture of Candida antarctica, the addition of BS-UC could improve the biodegradation rate of some n-alkanes (e.g. 90.2% for n-decane, 90.2% for n-undecane, 89.0% for dodecane), a mixture of n-alkanes (82.3%) and kerosene (72.5%). By comparing the effects of the biosurfactants BS-UC and MEL and chemical surfactants on the biodegradation of crude oil, it was found that biosurfactants could be used to enhance the degradation of petroleum compounds instead of chemical surfactants. In a laboratory scale immobilized bioreactor, the addition of biosurfactant improved not only the emulsification of kerosene in simulated wastewater but also its biodegradation rate. The highest degradation rate of kerosene by addition of MEL and BS-UC reached 87 and 90% at 15 h, respectively. The results showed that the biosurfactant BS-UC was highly promising for work on biodegradation of hydrophobic contaminants.     

Biosurfactant production by Mucor circinelloides: Environmental applications and surface‐active properties

Biosurfactants are structurally a diverse group of surface‐active molecules widely used for various purposes in industry. In this study, among 120 fungal isolates, M‐06 was selected as a superior biosurfactant producer, based on different standard methods, and was identified as Mucor circinelloides on the basis of its nucleotide sequence of the internal transcribed spacer (ITS) gene. M. circinelloides reduced the surface tension to 26 mN/m and its EI₂₄ index was determined to be 66.6%. The produced biosurfactant exhibited a high degree of stability at a high temperature (121°C), salinity (40 g/L), and acidic pH (2–8). The fermentation broth's ability to recover oil from contaminated sand was 2 and 1.8 times higher than those of water and Tween 80, respectively. The ability of biosurfactant to emulsify crude oil in the sea and fresh water was 64.9 and 48% respectively. This strain could remove 87.6% of crude oil in the Minimal Salt Medium (MSM) crude oil as the sole carbon source. The results from a primary chemical characterization of crude biosurfactant suggest that it is of a glycolipid nature. The strain and its biosurfactant could be used as a potent candidate in bioremediation of oil‐contaminated water, soil, and for oil recovery processes.     

Biosurfactant Production by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> from Renewable Resources

This study deals with production and characterization of biosurfactant from renewable resources by Pseudomonas aeruginosa. Biosurfactant production was carried out in 3L fermentor using waste motor lubricant oil and peanut oil cake. Maximum biomass (11.6 mg/ml) and biosurfactant production (8.6 mg/ml) occurred with peanut oil cake at 120 and 132 h respectively. Characterization of the biosurfactant revealed that, it is a lipopeptide with chemical composition of protein (50.2%) and lipid (49.8%). The biosurfactant (1 mg/ml) was able to emulsify waste motor lubricant oil, crude oil, peanut oil, kerosene, diesel, xylene, naphthalene and anthracene, comparatively the emulsification activity was higher than the activity found with Triton X-100 (1 mg/ml). Results obtained in the present study showed the possibility of biosurfactant production using renewable, relatively inexpensive and easily available resources. Emulsification activity found with the biosurfactant against different hydrocarbons showed its possible application in bioremediation of environments polluted with various hydrocarbons.     

Production of a biosurfactant exhibiting excellent emulsification and surface active properties bySerratia marcescens

A biosurfactant exhibiting excellent emulsification activity and surface properties was isolated during growth ofSerratia marcescens on 2% (w/v) sucrose. Reduction in surface tension values and increase in the yield of biosurfactant during the late log phase of growth indicates that the biosurfactant is a secondary microbial metabolite. The biosurfactant formed stable emulsions with a wide variety of hydrocarbons. The isolated surface-active compound has a potential application in enhanced oil recovery and is stable over a wide range of temperatures (10-120‡C) and pH (2-12). This is the first report of effective and stable emulsion formation by a strain ofSerratia marcescens.     

Biosurfactant production by free and alginate entrapped cells of <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis>

Production of biosurfactant by free and alginate-entrapped cells of Pseudomonas fluorescens Migula 1895-DSMZ was investigated using olive oil as the sole carbon and energy source. Biosurfactant synthesis was followed by measuring surface tension and emulsifying index E24 over 5 days at ambient temperature and at neutral pH. Diffusional limitations in alginate beads affected the kinetics of biosurfactant production when compared to that obtained with free cells culture. Nevertheless, the emulsion stability was improved and fewer by-products interfered with the biosurfactant activity. A decrease in pH down to 5 in the case of immobilized cells was observed during the first 3 days, after which it returned to its initial value. The minimum values of surface tension were 30 and 35 dynes cm⁻¹ achieved after 40 and 72 h with free and immobilized cells, respectively, while the corresponding maximum E24 values were 67 and 62%, respectively. After separation by acetone precipitation, the biosurfactant showed a rhamnolipid-type in nature, and had a good foaming and emulsifying activities. The critical micellar concentration was found to be 290 mg l⁻¹. The biosurfactant also showed good stability during exposure to high temperatures (up to 120 °C for 15 min), to high salinity (10% NaCl) and to a wide range of pH (4–9).     

A halotolerant and thermotolerant <Emphasis Type="Italic">Bacillus</Emphasis> sp. degrades hydrocarbons and produces tensio-active emulsifying agent

A Bacillus sp. strain DHT, isolated from oil-contaminated soil, grew and produced biosurfactant when cultured in variety of substrate at salinities of up to 100 g l⁻¹ and temperatures up to 45°C. It was capable of utilizing crude oil, fuels, various pure alkanes and PAHs as a sole carbon and energy source across a wide range of temperature and salinity. Over the range evaluated, the degradation of hydrocarbon and biosurfactant production was not influenced by salinity (0–10% wv⁻¹) and temperature (30–45°C). The biosurfactant produced by the organism emulsified a range of hydrocarbons with hexadecane as the best substrate and toluene as the poorest. From 16S rDNA analysis, strain DHT was related to Bacillus licheniformis.     

Anti-adhesion activity of two biosurfactants produced by <Emphasis Type="Italic">Bacillus</Emphasis> spp. prevents biofilm formation of human bacterial pathogens

In this work, two biosurfactant-producing strains, Bacillus subtilis and Bacillus licheniformis, have been characterized. Both strains were able to grow at high salinity conditions and produce biosurfactants up to 10% NaCl. Both extracted-enriched biosurfactants showed good surface tension reduction of water, from 72 to 26–30 mN/m, low critical micelle concentration, and high resistance to pH and salinity. The potential of the two lipopeptide biosurfactants at inhibiting biofilm adhesion of pathogenic bacteria was demonstrated by using the MBEC device. The two biosurfactants showed interesting specific anti-adhesion activity being able to inhibit selectively biofilm formation of two pathogenic strains. In particular, Escherichia coli CFT073 and Staphylococcus aureus ATCC 29213 biofilm formation was decreased of 97% and 90%, respectively. The V9T14 biosurfactant active on the Gram-negative strain was ineffective against the Gram-positive and the opposite for the V19T21. This activity was observed either by coating the polystyrene surface or by adding the biosurfactant to the inoculum. Two fractions from each purified biosurfactant, obtained by flash chromatography, fractions (I) and (II), showed that fraction (II), belonging to fengycin-like family, was responsible for the anti-adhesion activity against biofilm of both strains.     

Experimental design for the production of tensio-active agent by <Emphasis Type="Italic">Candida lipolytica</Emphasis>

The strategy of optimization using sequential factorial design was employed to enhance the tensio-active emulsifying agent produced by Candida lipolytica using soybean oil refinery residue as substrate. A full factorial design was used to evaluate the impact of three fermentation factors—amounts of refinery residue, glutamic acid and yeast extract. This allowed exclusion of the yeast extract. Full factorials designs were then sequentially used to optimize the levels of the residue and glutamic acid. The surface tension value was finally reduced to 25.29 mN/m. The maximum emulsifier activity using different substrates was within 40 h of cultivation. The surface tension of the cell-free broth containing the biosurfactant remained very stable during exposure to a wide range of pH (2–12), temperatures (0–120°C) and salinity (2–10% NaCl). The combination of an industrial waste and a cheap substrate therefore seems to be very promising for the low-cost production of potent biosurfactant.     

Production and characterization of lipopeptide biosurfactant by a sponge-associated marine actinomycetes <Emphasis Type="Italic">Nocardiopsis alba</Emphasis> MSA10

A sponge-associated marine actinomycetes Nocardiopsis alba MSA10 was screened and evaluated for the production of biosurfactant. Biosurfactant production was confirmed by conventional screening methods including hemolytic activity, drop collapsing test, oil displacement method, lipase production and emulsification index. The active compound was extracted with three solvents including ethyl acetate, diethyl ether and dichloromethane. The diethyl ether extract was fractionated by TLC and semi-preparative HPLC to isolate the pure compound. In TLC, a single discrete spot was obtained with the R _f 0.60 and it was extrapolated as valine. Based on the chemical characterization, the active compound was partially confirmed as lipopeptide. The optimum production was attained at pH 7, temperature 30°C, and 1% salinity with glucose and peptone supplementation as carbon and nitrogen sources, respectively. Considering the biosurfactant production potential of N. alba, the strain could be developed for large-scale production of lipopeptide biosurfactant.     

Isolation and characterization of a biosurfactant‐producing Fusarium sp. BS‐8 from oil contaminated soil

This study reports characterization of a biosurfactant‐producing fungal isolate from oil contaminated soil of Missa Keswal oil field, Pakistan. It was identified as Fusarium sp. BS‐8 on the basis of macroscopic and microscopic morphology, and 18S rDNA gene sequence homology. The biosurfactant‐producing capability of the fungal isolates was screened using oil displacement activity, emulsification index assay, and surface tension (SFT) measurement. The optimization of operational parameters and culture conditions resulted in maximum biosurfactant production using 9% (v/v) inoculum at 30°C, pH 7.0, using sucrose and yeast extract, as carbon and nitrogen sources, respectively. A C:N ratio of 0.9:0.1 (w/w) was found to be optimum for growth and biosurfactant production. At optimal conditions, it attained lowest SFT (i.e., 32 mN m^?1) with a critical micelle concentration of ≥ 1.2 mg mL^?1. During 5 L shake flask fermentation experiments, the biosurfactant productivity was 1.21 g L^?1 pure biosurfactant having significant emulsifying index (E₂₄, 70%) and oil‐displacing activity (16 mm). Thin layer chromatography and Fourier transform infrared spectrometric analyses indicated a lipopeptide type of the biosurfactant. The Fusarium sp. BS‐8 has substantial potential of biosurfactant production, yet it needs to be fully characterized with possibility of relatively new class of biosurfactants. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1065–1075, 2014     

Isolation and characterization of hydrocarbon-degrading and biosurfactant-producing yeast strains obtained from a polluted lagoon water

Microbial surfactants are environmentally friendly products with amazing properties and spectrum of applications. It is therefore, not surprising that research has increased in recent time with the objectives of sourcing for novel surface-active compounds with dual functions in oil and pharmaceutical industries. Evaluation of hydrocarbon degrading potentials and emulsifying activities indicated that biosurfactants were produced by two newly isolated and promising yeast strains, Saccharomyces cerevisiae and Candida albicans, obtained from a polluted lagoon water. Both strains were able to grow effectively on crude oil and diesel as sole sources of carbon and energy. Growth curves on diesel were obtained to establish the relation between cell growth and biosurfactant production. The growth peak was on the 8th day while the specific growth rate ranged insignificantly (P < 0.05) between 0.46 and 0.48 day⁻¹. Interestingly, biosurfactant was detected on the 2nd day when growth was almost inexistent, with maximal production obtained at stationary/death phase of growth. The partially-purified biosurfactants exhibited antimicrobial activities by completely inhibiting the growth of clinical strains of Escherichia coli and Staphylococcus aureus at all concentrations tested. Although C. albicans appeared to be a better diesel-utilizer and biosurfactant-producer (E₂₄ = 64.2%), the potency of its surfactant was smaller than that of S. cerevisiae. These strains represent a new class of biosurfactant producers that have potential for use in a variety of biotechnological and industrial processes particularly in the pharmaceutical industry.     

Evaluation Antimicrobial and Antiadhesive Properties of the Biosurfactant Lunasan Produced by <Emphasis Type="Italic">Candida sphaerica</Emphasis> UCP 0995

Different groups of biosurfactants exhibit diverse properties and display a variety of physiological functions in producer microorganisms; these include enhancing the solubility of hydrophobic/water-insoluble compound, heave metal binding, bacterial pathogenesis, cell adhesion and aggregation, quorum sensing and biofilm formation. Candida sphaerica was grown in a low cost medium, consisting of distilled water supplemented with 9% refinery residue of soybean oil and 9% corn steep liquor, for 144 h at 28°C and 150 rpm. The cell-free supernatant obtained at the end of the experiments was submitted to extraction, and afterward the biosurfactant was isolated using methanol with a yield of 9 g l⁻¹. The critical micelle concentration of the biosurfactant was found to be 0.25 mg ml⁻¹ with a surface tension of 25 mN m⁻¹. Several concentrations of the biosurfactant (0.625–10 mg ml⁻¹) were used to evaluate its antimicrobial and antiadhesive activities against a variety of microorganisms. The biosurfactant showed antimicrobial activity against Streptococcus oralis (68%), Candida albicans (57%), and Staphylococcus epidermidis(57.6%) for the highest concentration tested. Furthermore, the biosurfactant at a concentration of 10 mg ml⁻¹ inhibited the adhesion between 80 and 92% of Pseudomonas aeruginosa, Streptococcus agalactiae, Streptococcus sanguis12. Inhibition of adhesion with percentages near 100% occurred for the higher concentrations of biosurfactant used. Results gathered in this study point to a potential use of the biosurfactant in biomedical applications.     

Isolation and characterization of a biosurfactant producing strain, <Emphasis Type="Italic">Brevibacilis brevis</Emphasis> HOB1

Biosurfactant-producing bacteria were isolated from the production water of an oil field. Isolates were screened for biosurfactant production using surface tension test. The highest reduction of surface tension was achieved with a bacterial strain which was identified by 16S rRNA gene sequencing as Brevibacilis brevis HOB1. It has been investigated using different carbon and nitrogen sources. It showed that the strain was able to grow and reduce the surface tension of the broth to 29 mN/m on commercial sugar and maltose, and to 32 mN/m on glucose after 72 h of growth. The maximum amount of biosurfactant was obtained when nitrate ions were supplied as nitrogen source. Biosurfactant produced by Brevibacilis brevis HOB1 was confirmed as a lipopeptide class of biosurfactant using TLC test and mass spectra. Lipopeptide isoforms were isolated from cell-free supernatants by acid-precipitation followed by one step of chromatographic separation on solid-phase ODS C18 column. The separation was confirmed by HPLC and ESI Q-TOF MS spectroscopy. Comparing the mass data obtained and the mass numbers reported for the lipopeptide complexes from other strains, it can be concluded that the major lipopeptide product of Brevibacilis brevis HOB1 is the surfactin isoform. This lipopeptide showed strong antibacterial and antifungal activity. It is a candidate for the biocontrol of pathogens in agriculture and other industries.     

Co-Utilization of Canola Oil and Glucose on the Production of a Surfactant by <Emphasis Type="Italic">Candida lipolytica</Emphasis>

Candida lipolytica synthesized a surfactant in a cultivation medium supplemented with canola oil and glucose as carbon sources. Measurements of biosurfactant production and surface tension indicated that the biosurfactant was produced at 48 h of fermentation. The surface-active species is constituted by the protein–lipid–polysaccharide complex in nature. The cell-free broth was particularly influenced by the addition of salt, the pH and temperature depending on the emulsified substrate (hexadecane or a vegetable oil). After comparison between ethyl acetate and mixtures of chloroform and methanol as solvent systems for surfactant recovery, it was found that ethyl acetate was able to extract crude surfactant material with high product recovery (8.0 g/L). The isolated biosurfactant decreased the surface tension to values of 30 mN/m at the critical micelle concentration. Emulsification properties of the biosurfactant produced were compared to those of commercial emulsifiers and other microbial surfactants.     

Isolation of thermotolerant,halotolerant, facultative biosurfactant-producing bacteria

Several facultative bacterial strains tolerant to high temperature and salinity were isolated from the oil reservoir brines of an Iranian oil field (Masjed-I Soleyman). Some of these isolates were able to grow up to 60°C and at high concentration of NaCl (15% w/v). One of the isolates grew at 40°C, while it was able to grow at 15% w/v NaCl. Tolerances to NaCl levels decreased as the growth temperatures were increased. Surfactant production ability was detected in some of these isolates. The use of biosurfactant is considered as an effective mechanism in microbial-enhanced oil recovery processes detected in some of these isolates. The surfactant producers were able to grow at high temperatures and salinities to about 55°C and 10% w/v, respectively. These isolates exhibited morphological and physiological characteristics of the Bacillus genus. The partial sequencing of the 16S ribosomal deoxyribonucleic acid gene of the selected isolates was assigned them to Bacillus subtilis group. The biosurfactant produced by these isolates caused a substantial decrease in the surface tension of the culture media to 26.7 mN/m. By the use of thin-layer chromatography technique, the presence of the three compounds was detected in the tested biosurfactant. Infrared spectroscopy and ¹H nuclear magnetic resonance analysis were used, and the partial structural characterization of the biosurfactant mixture of the three compounds was found to be lipopeptidic in nature. The possibility of use of the selected bacterial strains reported, in the present study, in different sectors of the petroleum industry has been addressed.     

Biosurfactant Production by Azotobacter chroococcum Isolated from the Marine Environment

Preliminary characterization of a biosurfactant-producing Azotobacter chroococcum isolated from marine environment showed maximum biomass and biosurfactant production at 120 and 132 h, respectively, at pH 8.0, 38°C, and 30‰ salinity utilizing a 2% carbon substrate. It grew and produced biosurfactant on crude oil, waste motor lubricant oil, and peanut oil cake. Peanut oil cake gave the highest biosurfactant production (4.6 mg/mL) under fermentation conditions. The biosurfactant product emulsified waste motor lubricant oil, crude oil, diesel, kerosene, naphthalene, anthracene, and xylene. Preliminary characterization of the biosurfactant using biochemical, Fourier transform infrared spectroscopy, and mass spectral analysis indicated that the biosurfactant was a lipopeptide with percentage lipid and protein proportion of 31.3:68.7.     

Role of Sophorolipid Biosurfactant in Degradation of Diesel Oil by Candida tropicalis

The yeast Candida tropicalis, isolated from petroleum-contaminated soil in India, was found to be the potent producer of biosurfactant in mineral salt media containing diesel oil as the carbon source and found to be an efficient degrader of diesel oil (98%) over a period of 10 days. The crude biosurfactant decreased the surface tension of cell-free broth, 78 to 30 mN/m, with a large oil displacement area and highly positive drop collapse test. The crude biosurfactant was purified using silica gel column chromatography followed by dialysis. With the use of Fourier transform infrared (FT-IR) spectroscopy, in combination with gas chromatography–mass spectrometry (GC-MS) analysis, chemical structures of the purified biosurfactant was identified as sophorolipid species. Involvement of biosurfactant in physiological mechanism of diesel adsorption on yeast cell surface was characterized based on zeta potential. When diesel oil was emulsified with biosurfactant, the surface charge of the diesel was modified, resulting in more adsorption of diesel on yeast cell surface. Biosurfactant production by yeast species was monitored using scanning electron microscopy (SEM) analysis and found that yeast species could form thick mat of mucilaginous biosurfactant that could interconnect the individual cells. Uptake of diesel oil by C. tropicalis was elucidated through transmission electron microscopy (TEM) analysis. Interestingly, it was observed that internalization of diesel oil droplet was taking place, suggesting a mechanism similar in appearance to active pinocytosis.     

Physiological aspects of hydrocarbon emulsification, metal resistance and DNA profile of biodegrading bacteria isolated from oil polluted sites

The production of biosurfactants was evaluated for seven bacterial strains isolated from different oil contaminated sites by the Emulsification Index using diesel oil as the hydrocarbon source. Minimum Inhibitory Concentrations of Mg²⁺, Cr³⁺ and Cu²⁺ were determined to identify the less sensitive bacteria in order to select the best strains for bioremediation. Plasmid extraction was also performed in order to search for gene sequences involved with biosurfactant synthesis. All strains were able to emulsify diesel oil. Rhodococcus ruber AC239 presented the best index (58%), followed by other Rhodococcus strains. Pseudomonas aeruginosa, R. ruber AC239, AC87 and R. erytropolis AC272 presented smallest sensitivities to heavy metals used, being suitable for use in sites contaminated with high concentrations of them. No plasmid DNA was detected showing that biosurfactant coding genes should be in the chromosomal DNA.     

Production and structural characterization of surfactin (C14/Leu7) produced by Bacillus subtilis isolate LSFM-05 grown on raw glycerol from the biodiesel industry

The production of biosurfactant by Bacillus subtilis LSFM-05 was carried out using raw glycerol, obtained from a vegetable oil biodiesel plant in Brazil, as the sole carbon source. Production of the biosurfactant was carried out in a 15-L bench-top fermentor and the surfactant was obtained from the foam produced. The crude surfactant was purified by silica gel column chromatography with a yield of 230 mg of the purified biosurfactant per liter of foam. TLC, IR spectroscopy, ¹H and ¹³C NMR and Fourier transform ion cyclotron resonance mass spectrometry with electrospray ionization (ESI-FTMS) were used to characterize the purified surfactant. The isolated surfactant was identified as a surfactin lipopeptide. MS/MS data identified the amino acid sequence as GluOMe-Leu-Leu-Asp-Val-Leu-Leu and showed that the fatty acid moiety contained 14 carbons in iso, anteiso or normal configurations. The critical micelle concentration of the C₁₄/Leu₇ surfactin was 70 μM, with emulsification efficiency after 24 h (E₂₄) of 67.6% against crude oil. Raw glycerol represents an abundant and renewable carbon source and provides an opportunity for reducing the cost of biosurfactant production and may add value to biodiesel production by creating new commercial applications for this by-product.