RNA dependence of the bacteriophage phi 29 DNA packaging ATPase.

The activity of the DNA packaging adenosine triphosphatase (ATPase) of the Bacillus subtilis bacteriophage phi 29 is dependent upon prohead RNA. The 174 nucleotide viral-encoded RNA is positioned on the head-tail connector at the portal vertex of the phi 29 precursor shell (prohead). Here, the RNA interacts with the ATP-binding gene 16 product (gp16) to constitute the DNA-packaging ATPase and initiate DNA packaging in vitro. Both the prohead connector (gene 10 product, gp10) and gp16 may utilize an RNA recognition motif characteristic of a number of RNA-associated proteins, and the binding of gp16 by proheads shields the prohead RNA from RNase A. The ATPase activity of gp16 is stimulated fourfold by RNA and tenfold by proheads with RNA. RNA is needed continuously for the gp16/RNA ATPase activity and is essential for the gp16/prohead ATPase activity. The prohead, with its connector, RNA and associated gp16 in an assembly-regulated configuration, hydrolyzes ATP and drives phi 29 DNA translocation.     

Phylogenetic analysis and secondary structure of the Bacillus subtilis bacteriophage RNA required for DNA packaging

An unusual RNA molecule encoded by the Bacillus subtilis bacteriophage phi 29 is a structural component of the viral prohead and is required for the ATP-dependent packaging of DNA. Here we report a model of secondary structure for this prohead RNA developed from a phylogenetic analysis of the primary sequences of prohead RNAs of related phages. Twenty-nine phages related to phi 29 were found to produce prohead RNAs. These RNAs were analyzed by their ability to replace phi 29 RNA in in vitro phage assembly, by Northern blot hybridization with a probe complementary to phi 29 RNA, and by partial and complete sequence analyses. These analyses revealed four quite different sequences ranging in length from 161 to 174 residues. The secondary structure deduced from these sequences, in agreement with earlier observations, indicated that prohead RNA is organized into two domains. The larger 5'-domain (Domain I) is composed of 113-117 residues and contains four helices. Three of these helices appear to be organized into a central stem that is interrupted by two unpaired loops and the fourth helix and loop. The smaller 3'-domain (Domain II) is composed of 40-44 residues and consists of two helices. Domains I and II are separated by 8-13 unpaired residues. Nuclease cleavage occurs readily in this single-stranded joining region, and this cleavage allows the subsequent separation of the two RNA domains. The separated Domain I is fully active in DNA packaging in vitro. The functional significance and biological role of Domain II are unknown. The phylogenetic secondary structure model provides a basis for further analysis of the role of this RNA in bacteriophage morphogenesis.     

Cleaving the prohead RNA of bacteriophage phi 29 alters the in vitro packaging of restriction fragments of DNA-gp3

In vitro packaging of restriction fragments of the bacteriophage phi 29 DNA-gp3 (DNA-gene product 3 complex) in the defined system was dependent on prohead RNA. Truncated prohead RNAs were obtained by in situ RNase A digestion, isolated and sequenced. Proheads having the intact 174 base RNA were compared to proheads having RNAs of 120, 95, 71, 69 or 54 bases for the capacity to package the DNA-gp3 left and right ends and internal (non-end) fragments generated by the restriction enzymes EcoRI, HpaI and BstNI. Proheads with the 174 or 120 base RNAs packaged both left and right ends; internal fragments were packaged more efficiently by proheads with the 120 base RNA. Proheads with the 95 base RNA packaged DNA-gp3 left ends and internal fragments efficiently, but lost the capacity to package right ends. Only internal fragments were packaged by proheads with the 71 base RNA, and proheads having 69 or 54 base RNAs were inactive. RNA-free proheads were effectively reconstituted with purified 174 and 120 base RNAs to produce particles similar in biological activity to the proheads from which the RNAs were isolated. The 95 base RNA was the smallest RNA of the group that could reconstitute the prohead and direct fragment packaging, although packaging was inefficient. Alteration of the specificity of DNA fragment packaging with truncated prohead RNAs has delineated RNA domains that function in DNA-gp3 recognition and prohead binding.     

DNA packaging motor assembly intermediate of bacteriophage phi29

Unraveling the structure and assembly of the DNA packaging ATPases of the tailed double-stranded DNA bacteriophages is integral to understanding the mechanism of DNA translocation. Here, the bacteriophage phi29 packaging ATPase gene product 16 (gp16) was overexpressed in soluble form in Bacillus subtilis (pSAC), purified to near homogeneity, and assembled to the phi29 precursor capsid (prohead) to produce a packaging motor intermediate that was fully active in in vitro DNA packaging. The formation of higher oligomers of the gp16 from monomers was concentration dependent and was characterized by analytical ultracentrifugation, gel filtration, and electron microscopy. The binding of multiple copies of gp16 to the prohead was dependent on the presence of an oligomer of 174- or 120-base prohead RNA (pRNA) fixed to the head-tail connector at the unique portal vertex of the prohead. The use of mutant pRNAs demonstrated that gp16 bound specifically to the A-helix of pRNA, and ribonuclease footprinting of gp16 on pRNA showed that gp16 protected the CC residues of the CCA bulge (residues 18-20) of the A-helix. The binding of gp16 to the prohead/pRNA to constitute the complete and active packaging motor was confirmed by cryo-electron microscopy three-dimensional reconstruction of the prohead/pRNA/gp16 complex. The complex was capable of supercoiling DNA-gp3 as observed previously for gp16 alone; therefore, the binding of gp16 to the prohead, rather than first to DNA-gp3, represents an alternative packaging motor assembly pathway.     

Role of RNA in bacteriophage phi 29 DNA packaging

A novel bacteriophage phi 29 RNA of 174 nucleotides is essential for the in vitro packaging of the DNA-terminal protein complex into proheads. The RNA, bound to the prohead portal vertex (connector), participates in assembly and function of the DNA translocating ATPase and in recognition of the DNA left-end during the course of the packaging reaction. The RNA is present in related phages and varies widely in primary sequence, but its secondary structure, as deduced by phylogenetic analysis, is both highly conserved and unique among small RNAs.     

Purification and functional characterization of p16, the ATPase of the bacteriophage Φ29 packaging machinery

Bacteriophage Φ29 codes for a protein (p16) that is required for viral DNA packaging both in vivo and in vitro. Co-expression of p16 with the chaperonins GroEL and GroES has allowed its purification in a soluble form. Purified p16 shows a weak ATPase activity that is stimulated by either DNA or RNA, irrespective of the presence of any other viral component. The stimulation of ATPase activity of p16, although induced under packaging conditions, is not dependent of the actual DNA packaging and in this respect the Φ29 enzyme is similar to other viral terminases. Protein p16 competes with DNA and RNA in the interaction with the viral prohead, which occurs through the N-terminal region of the connector protein (p10). In fact, p16 interacts in a nucleotide-dependent fashion with the viral Φ29-encoded RNA (pRNA) involved in DNA packaging, and this binding can be competed with DNA. Our results are consistent with a model for DNA translocation in which p16, bound and organized around the connector, acts as a power stroke to pump the DNA into the prohead, using the hydrolysis of ATP as an energy source.     

A Three-Helix Junction Is the Interface between Two Functional Domains of Prohead RNA in ?29 DNA Packaging

The double-stranded-DNA bacteriophages employ powerful molecular motors to translocate genomic DNA into preformed capsids during the packaging step in phage assembly. Bacillus subtilis bacteriophage ϕ29 has an oligomeric prohead RNA (pRNA) that is an essential component of its packaging motor. The crystal structure of the pRNA-prohead binding domain suggested that a three-helix junction constitutes both a flexible region and part of a rigid RNA superhelix. Here we define the functional role of the three-helix junction in motor assembly and DNA packaging. Deletion mutagenesis showed that a U-rich region comprising two sides of the junction plays a role in the stable assembly of pRNA to the prohead. The retention of at least two bulged residues in this region was essential for pRNA binding and thereby subsequent DNA packaging. Additional deletions resulted in the loss of the ability of pRNA to multimerize in solution, consistent with the hypothesis that this region provides the flexibility required for pRNA oligomerization and prohead binding. The third side of the junction is part of a large RNA superhelix that spans the motor. The insertion of bases into this feature resulted in a loss of DNA packaging and an impairment of initiation complex assembly. Additionally, cryo-electron microscopy (cryoEM) analysis of third-side insertion mutants showed an increased flexibility of the helix that binds the ATPase, suggesting that the rigidity of the RNA superhelix is necessary for efficient motor assembly and function. These results highlight the critical role of the three-way junction in bridging the prohead binding and ATPase assembly functions of pRNA.     

Role of the amino-terminal domain of bacteriophage phi 29 connector in DNA binding and packaging.

The connector of bacteriophage phi 29 is required for prohead assembly, binds DNA, and drives DNA packaging into viral proheads. Limited proteolysis of the connector protein with endoproteinase Glu-C from Staphylococcus aureus V8 and chymotrypsin showed that a domain of the NH2-terminal region is involved in DNA binding and in the subsequent packaging into preformed proheads, but not in prohead assembly. Mutants in specific amino acids of the NH2-terminal domain, obtained by directed mutagenesis techniques, showed that the Ala1-Arg2-Lys3-Arg4 region of the connector is absolutely necessary for DNA packaging into the proheads as well as for efficient DNA binding.     

Topology of the components of the DNA packaging machinery in the phage phi29 prohead

Chromosome condensation inside dsDNA viral particles is a complex process requiring the coordinated action of several viral components. The similarity of the process in different viral systems has led to the suggestion that there is a common underlying mechanism for DNA packaging, in which the portal vertex or connector plays a key role. We have studied the topology of the packaging machinery using a number of antibodies directed against different domains of the connector. The charged amino-terminal, the carboxyl-terminal, and the RNA binding domain are accessible areas in the connector assembled into the prohead, while the domains corresponding to the 12 large appendages of the connector are buried inside the prohead. Furthermore, while the antibodies against the carboxyl and amino-terminal do not affect the packaging reaction, incubation of proheads with antibodies against the RNA binding domain abolishes the packaging activity. The comparison of the three-dimensional reconstructions of bacteriophage phi29 proheads with proheads devoid of their specific pRNA by RNase treatment shows that this treatment removes structural elements of the distal vertex of the portal structure, suggesting that the pRNA required for packaging is located at the open gate of the channel in the narrow side of the connector.     

Defining molecular and domain boundaries in the bacteriophage phi29 DNA packaging motor

Cryo-electron microscopy (cryo-EM) studies of the bacteriophage phi29 DNA packaging motor have delineated the relative positions and molecular boundaries of the 12-fold symmetric head-tail connector, the 5-fold symmetric prohead RNA (pRNA), the ATPase that provides the energy for packaging, and the procapsid. Reconstructions, assuming 5-fold symmetry, were determined for proheads with 174-base, 120-base, and 71-base pRNA; proheads lacking pRNA; proheads with ATPase bound; and proheads in which the packaging motor was missing the connector. These structures are consistent with pRNA and ATPase forming a pentameric motor component around the unique vertex of proheads. They suggest an assembly pathway for the packaging motor and a mechanism for DNA translocation into empty proheads.     

Role of the CCA bulge of prohead RNA of bacteriophage ø29 in DNA packaging

The oligomeric ring of prohead RNA (pRNA) is an essential component of the ATP-driven DNA packaging motor of bacteriophage ?29. The A-helix of pRNA binds the DNA translocating ATPase gp16 (gene product 16) and the CCA bulge in this helix is essential for DNA packaging in vitro. Mutation of the bulge by base substitution or deletion showed that the size of the bulge, rather than its sequence, is primary in DNA packaging activity. Proheads reconstituted with CCA bulge mutant pRNAs bound the packaging ATPase gp16 and the packaging substrate DNA-gp3, although DNA translocation was not detected with several mutants. Prohead/bulge-mutant pRNA complexes with low packaging activity had a higher rate of ATP hydrolysis per base pair of DNA packaged than proheads with wild-type pRNA. Cryoelectron microscopy three-dimensional reconstruction of proheads reconstituted with a CCA deletion pRNA showed that the protruding pRNA spokes of the motor occupy a different position relative to the head when compared to particles with wild-type pRNA. Therefore, the CCA bulge seems to dictate the orientation of the pRNA spokes. The conformational changes observed for this mutant pRNA may affect gp16 conformation and/or subsequent ATPase-DNA interaction and, consequently, explain the decreased packaging activity observed for CCA mutants.     

Implication of the prohead RNA in phage phi29 DNA packaging

RNA is an important component of many biological processes, including DNA encapsidation of bacteriophage phi29 of Bacillus subtilis. Interestingly, the prohead RNA is involved in this encapsidation, and was found in monomer, dimer, pentamer and hexamer conformations. This article presents and debates current knowledge about the prohead RNA structures, mechanisms, and roles in DNA encapsidation. A new dimer structure is presented, and its specific role in DNA encapsidation is discussed.     

Prohead and DNA-gp3-dependent ATPase activity of the DNA packaging protein gp16 of bacteriophage phi 29

The ATPase activity of the DNA packaging protein gp16 (gene product 16) of bacteriophage phi 29 was studied in the completely defined in-vitro assembly system. ATP was hydrolyzed to ADP and Pi in the packaging reaction that included purified proheads, DNA-gp3 and gp16. Approximately one molecule of ATP was used in the packaging of 2 base-pairs of phi 29 DNA, or 9 X 10(3) ATP molecules per virion. The hydrolysis of ATP by gp16 was both prohead and DNA-gp3 dependent. gp16 contained both the "A-type" and the "B-type" ATP-binding consensus sequences (Walker et al., 1982) and the predicted secondary structure for ATP binding. The A-type sequence of gp16 was "basic-hydrophobic region-G-X2-G-X-G-K-S-X7-hydrophobic", and similar sequences were found in the phage DNA packaging proteins gpA of lambda, gp19 of T7 and gp17 of T4. Having both the ATP-binding and potential magnesium-binding domains, all of these proteins probably function as ATPases and may have common prohead-binding capabilities. The phi 29 protein gp3, covalently bound to the DNA, may be analogous in function to proteins gpNul of lambda and gpl of phi 21 that bind the DNA.     

Mutant prohead RNAs in the in vitro packaging of bacteriophage phi 29 DNA-gp3.

The 174-base prohead RNA encoded by bacteriophage phi 29 of Bacillus subtilis, essential for packaging of the DNA-gp3 (DNA-gene product 3) complex, was expressed efficiently from the cloned gene. Computer programs for RNA structure analysis were used to fold hypothetical RNA mutants and thus to target mutagenesis of the RNA for studies of structure and function. Five mutants of the RNA were then produced by oligonucleotide-directed mutagenesis that were altered in the primary sequence at selected sites; two of these mutants were predicted to be altered in secondary structure from a model established previously by a phylogenetic analysis. The binding of the 32P end-labeled mutant RNAs to RNA-free proheads was comparable with that of the wild-type RNA. However, the capability of the mutant RNAs to reconstitute RNA-free proheads for DNA-gp3 packaging in the defined in vitro system and for assembly of phage in RNA-free extracts was variable, depending upon the alteration. Changes of highly conserved bases that retained the predicted secondary structure of the RNA model were tolerated to a much greater extent than changes predicted to alter the RNA secondary structure.     

In vitro packaging of DNA of the Bacillus subtilis bacteriophage SPP1

In vitro packaging of bacteriophage SPP1 DNA into procapsids is described and the requirements of this process were determined. Combination of proheads with an extract supplying terminase, DNA and phage tails yielded up to 10(7 )viable phages per milliliter of in vitro reaction under optimized conditions. The presence of neutral polymers and polyamines had a concentration and type dependent effect in the packaging reaction. The terminase donor extract lost rapidly activity at 30 degrees C in contrast to the stability of the prohead donor extract. Maturation to infective virions was observed using both procapsids assembled in SPP1 infected cells and procapsid-like structures assembled in Escherichia coli that overexpressed the SPP1 prohead gene clusters. Neither a majority of aberrant capsid-related structures present in the latter material nor procapsids lacking the portal protein inhibited DNA packaging. Addition of purified portal protein reduced DNA packaging activity in vitro only at concentrations 20-fold higher than those found in the SPP1 infected cell. The SPP1 DNA packaged in vitro originated exclusively from the terminase donor extract. This packaging selectivity was not observed in vivo during mixed infections. The data are compatible with a model for processive headful DNA packaging in which terminase and DNA co-produced in the same cell are tightly associated and can effectively discriminate the portal vertex of DNA packaging-proficient proheads from aberrant structures, from portal-less procapsids, and from isolated portal protein.     

Initiation events in in-vitro packaging of bacteriophage phi 29 DNA-gp3

Initiation events in the packaging of bacteriophage phi 29 DNA-gp3 (DNA-gene product 3 complex) were studied in a completely defined in-vitro system that included purified proheads, DNA-gp3 and the DNA packaging protein gp16. In the sequential interactions, gp16 first bound to, and was modified by, the prohead. The prohead-gp16 complex then bound to DNA-gp3, resulting in a second modification of gp16 that permitted binding of ATP. DNA-gp3 aggregates were produced, and the hydrolysis of ATP accompanied DNA-gp3 packaging. Binding and hydrolysis of ATP by gp16 was both prohead- and DNA-gp3-dependent. Interruption of packaging by DNase I addition revealed filled heads but few particles containing partial lengths of DNA, suggesting that following a rate-limiting initiation, the translocation of DNA-gp3 into the prohead was much faster in the defined in-vitro system than in extracts.     

DNA packaging of bacteriophage T4 proheads in vitro. Evidence that prohead expansion is not coupled to DNA packaging

We developed a system for DNA packaging of isolated bacteriophage T4 proheads in vitro and studied the role of prohead expansion in DNA packaging. Biologically active proheads have been purified from a number of packaging-deficient mutant extracts. The cleaved mature prohead is the active structural precursor for the DNA packaging reaction. Packaging of proheads requires ATP, Mg2+ and spermidine, and is stimulated by polyethylene glycol and dextran. Predominantly expanded proheads (ELPs) are produced at 37 degrees C and predominantly unexpanded proheads (ESPs) are produced at 20 degrees C. Both the expanded and unexpanded proheads are active in DNA packaging in vitro. This is based on the observations that (1) both ESPs and ELPs purified by chromatography on DEAE-Sephacel showed DNA packaging activity; (2) apparently homogeneous ELPs prepared by treatment with sodium dodecyl sulfate (which dissociates ESPs) retained significant biological activity; (3) specific precipitation of ELPs with anti-hoc immunoglobulin G resulted in loss of DNA packaging activity; and (4) ESPs upon expansion in vitro to ELPs retained packaging activity. Therefore, contrary to the models that couple DNA packaging to head expansion, in T4 the expansion and packaging appear to be independent, since the already expanded DNA-free proheads can be packaged in vitro. We therefore propose that the unexpanded to expanded prohead transition has evolved to stabilize the capsid and to reorganize the prohead shell functionally from a core-interacting to a DNA-interacting inner surface.     

Viral DNA packaging studied by fluorescence correlation spectroscopy

The DNA packaging machinery of bacteriophage T4 was studied in vitro using fluorescence correlation spectroscopy. The ATP-dependent translocation kinetics of labeled DNA from the bulk solution, to the phage interior, was measured by monitoring the accompanied decrease in DNA diffusibility. It was found that multiple short DNA fragments (100 basepairs) can be sequentially packaged by an individual phage prohead. Fluorescence resonance energy transfer between green fluorescent protein donors within the phage interior and acceptor-labeled DNA was used to confirm DNA packaging. Without ATP, no packaging was observed, and there was no evidence of substrate association with the prohead.     

The three-dimensional structure of a DNA translocating machine at 10 A resolution.

BACKGROUND: Head-tail connectors are viral substructures that are very important in the viral morphogenetic cycle, having roles in the formation of the precursor capsid (prohead), DNA packaging, tail binding to the mature head and in the infection process. Structural information on the connector would, therefore, help us to understand how this structure is related to a multiplicity of functions. RESULTS: Recombinant bacteriophage phi29 connectors have been crystallized in two-dimensional aggregates. An average projection image and a three-dimensional map have been obtained at 8 A and 10 A resolution, respectively, from untilted and tilted images of vitrified specimens of the two-dimensional crystals. The average projection image reveals a central mass surrounding a channel with 12 appendages protruding from the central mass. The three-dimensional map reveals a wide domain surrounded by 12 appendages that interact with the prohead vertex, and a narrow domain that interacts with the bacteriophage tail. At the junction of the two domains, 12 smaller appendages are visualized. A channel runs along the axis of the connector structure and is sufficiently wide to allow a double-stranded DNA molecule to pass through. CONCLUSIONS: The propeller-like structure of the phi29 connector strengthens the notion of the connector rotating during DNA packaging. The groove formed by the two lanes of large and small appendages may act as a rail to prevent the liberation of the connector from the prohead vertex during rotation.     

A functional domain of bacteriophage lambda terminase for prohead binding

Terminase is a multifunctional protein complex involved in DNA packaging during bacteriophage lambda assembly. Terminase is made of gpNul and gpA, the products of the phage lambda Nu1 and A genes. Early during DNA packaging terminase binds to lambda DNA to form a complex called complex I. Terminase is required for the binding of proheads by complex I to form a DNA: terminase: prohead complex known as complex II. Terminase remains associated with the DNA during encapsidation. The other known role for terminase in packaging is the production of staggered nicks in the DNA thereby generating the cohesive ends. Lambdoid phage 21 has cohesive ends identical to those of lambda. The head genes of lambda and 21 show partial sequence homology and are analogous in structure, function and position. The terminases of lambda and 21 are not interchangeable. At least two actions of terminase are involved in this specificity: (1) DNA binding; (2) prohead binding. The 1 and 2 genes at the left end of the 21 chromosome were identified as coding for the 21 terminase. gp1 and gp2 are analogous to gpNu1 and gpA, respectively. We have isolated a phage, lambda-21 hybrid 33, which is the product of a crossover between lambda and 21 within the terminase genes. Lambda-21 hybrid 33 DNA and terminase have phage 21 packaging specificity, as determined by complementation and helper packaging studies. The terminase of lambda-21 hybrid 33 requires lambda proheads for packaging. We have determined the position at which the crossover between lambda DNA and 21 DNA occurred to produce the hybrid phage. Lambda-21 hybrid 33 carries the phage 21 1 gene and a hybrid phage 2/A gene. Sequencing of lambda-21 hybrid 33 DNA shows that it encodes a protein that is homologous at the carboxy terminus with the 38 amino acids of the carboxy terminus of lambda gpA; the remainder of the protein is homologous to gp2. The results of these studies define a specificity domain for prohead binding at the carboxy terminus of gpA.