The relationship of dental crowding to tooth size, dental arch width, and arch depth

This study was undertaken to answer the question, "Are there any differences in the mesiodistal tooth diameters, dental arch width and dental arch depth between the crowded and noncrowded dentitions?" The materials submitted for study consisted of the Orthoscan intraoral occlusograms of 89 subjects with well-aligned dentition and those of 74 subjects with gross dental crowding. The tooth size and arch dimensions were measured from these intraoral occlusograms. The data were subjected to statistical treatment for comparison of noncrowded and crowded groups. The findings in this study lead to the following conclusions: The mesiodistal tooth diameters of the crowded group were significantly larger than those of the noncrowded group. The dental arch widths of the crowded group were significantly smaller than those of the noncrowded group. No substantial or significant difference in dental arch depth between the crowded and noncrowded subjects could be noted. From these findings it seems that tooth size and dental arch width are determining factors in the formation of dental crowding. Clinically, these results suggest that in the treatment of dental crowding, extraction of teeth and/or expansion of dental arches should be considered depending on what is the main causative factor.     

Heritability of dental arch dimensions in humans.

The purposes of this study were to estimate the heritabilities of several human dental arch dimensions and compare the hereditary differences among kinships and among variables. The sample consisted of 102 Japanese families, each including both parents and one of their offspring, and on average all subjects had relatively well-aligned permanent dentitions. The heritabilities of all variables were estimated from the regression of offspring on parent and on midparent. Results showed that genetics played a role regarding dental arch dimensions, and arch perimeter (sum of tooth width) was a more definite genetic-related factor than other arch dimensions, such as width, length, or size. There were few significant hereditary differences between sons and daughters, and between upper and lower arches for each variable. Sex chromosomal involvement was not confirmed, but maternal effects were found to be more evident in daughters than in sons, for both arches. Comparisons among the heritabilities of overall and of anterior arch dimensions indicated that size of the anterior part of the dental arch might be less resistant to environmental factors, especially in case of the lower arch.     

The dentition of the Indian Knoll skeletal population: odontometrics and cusp number.

Data on the permanent dentition of 153 individuals from the well known Indian Knoll skeletal population are presented. Mesiodistal and buccolingual measurements were taken with a Helios dial caliper. Cusp number of maxillary and mandibular molars are recorded. The Indian Knoll dentition is larger than many modern groups but smaller than Australoid or Mesolithic groups. With the exception of maxillary 12, males have larger teeth than females in both dimensions. The lower canine is the most dimorphic tooth. Through rank order correlation, an association was shown between the sexual dimorphism of the mesiodistal and buccolingual dimensions. Compared to modern groups, the Indian Knoll population displays a moderate degree of sexual dimorphism in tooth size. In general, the coefficients of variation were greater for the more distal teeth within morphological classes. Amounts of size variability did not differ significantly between the sexes; moreover, rank order correlations indicated that patterns of variability in both dimensions were similar for males and females. The predominant cusp number pattern for upper molars is 4-3-3 and for lowers 5-5(4)-5. No sex differences were shown for cusp occurrence or bilateral asymmetry in cusp number.     

Physical growth of Aymara children in a herding community of the Bolivian Altiplano.

In a small agropastoral Aymara community called Wariscata in the Andean Altiplano of Bolivia, anthropometric measurements were made in 1988. In comparison with those of published data for the other rural and urban Andean populations (Aymara, Quechua and Mestizo at high and low altitudes), the Aymara children of Wariscata were taller and heavier than other rural high altitude native children, but similar in height to urban high altitude children. This is possibly due to secular change of growth accompanied with nutritional improvement that has taken place in recent years. Chest width and depth had similar values to those in other Aymara children. But, Aymara children in Wariscata of both sexes had smaller chest dimensions (depth and width) than those of Quechua children. However, these ethnic differences in chest dimensions were not reflected in the adult Aymara and Quechua, suggesting different process of chest growth in Aymara and Quechua populations.     

Variation in dental occlusion and arches among melanesians of bougainville island,papua New Guinea. I. Methods,age changes,sex differences and population comparisons

Population studies of malocclusion lack comparability because of the subjective criteria employed in the definition of malocclusion. Alternatively, individual characteristics of occlusion can be quantified and compared within and between populations. Measurements were taken from the dental cases of 319 male an 359 female Melanesians from Bougainville, Papua New Guinea. The cross-sectional age changes from 12 to 68 years of age included an increase in intermolar arch width, a decrease in arch length and intercanine arch width, and increased crowding and malalignment. Neither age nor sex accounted for a large proportion of the differences among individuals. When compared to industrialized groups, the Bougainville population had a slight reduction in variance for most characteristics. Only the sagittal molar relationship was markedly less variable on Bougainville. The results emphasize that a quantitative evaluation of individual occlusal variables may reveal differences within and between populations not detected when simple malocclusion frequencies are reported.     

Oro-maxillofacial development in patients with GH deficiency and in normal short children

Detailed oro-maxillofacial studies using dental cast, pantomogram and cephalogram were performed in 43 patients with GH deficiency aged 7-17 years and compared statistically to the results from 62 short children with normal GH secretion. The dental age was retarded as compared to the chronological age in patients with GH deficiency by a mean of 2.0 +/- 1.3 years. This value did not differ statistically from that observed in normal short children (1.7 +/- 0.8 years). However the bone age was significantly retarded in patients with GH deficiency (3.2 +/- 1.7 yrs vs 1.5 +/- 1.1 yrs, p less than 0.001). There was no difference between tooth size or cephalogram analysis results in the children in the two groups. The coronal arch length, basal arch width and basal arch length were shorter in patients with GH deficiency. These data indicate underdevelopment of the maxilla in patients with GH deficiency.     

Palatal dimensions in 45,X-females

Seventy-two females with 45,X-chromosome complement were examined for palatal dimensions, and the results of the measurements were compared to those of first-degree normal female relatives of the study subjects and population control females. Hard stone casts were prepared for measuring widths and lengths of the maxillary alveolar arch and palatal height between or at the level of the permanent canines, first and second premolars, and first molars with a palatometer and sharp-pointed vernier calipers (0.5 mm). According to the analyses of covariance (history of orthodontic treatment and loss of permanent teeth as cofactors and age as covariate), the differences in palatal dimensions between the groups were statistically significant or highly significant for all dimensions except for palatal height in the posterior segments. The group of the 45,X-females had the highest mean value for palatal height at the level of the canines and systematically the lowest mean values for palatal width in all segments, while no clear difference could be found in the length of the alveolar arch between the 45,X-females and the relatives, the population control group showing the lowest value in the posterior segments. The findings of this study indicate that the narrowed palate rather than the high palate is a frequent but not definite feature in 45,X-females. This may reflect the effect of sex-chromosomes on width but not other dimensions of the palate, resulting in deficiency of transversal growth of the palate possibly through decreased growth of the palatal shelves or through disturbances in the growth of the nasal septum, sutural growth, or--to which the exostosis on the palatal alveolar plates would refer--disturbances in apposition-resorption growth changes of the maxilla.     

Metrical dental analysis on golden monkey (Rhinopithecus roxellana)

Dental variation in the Chinese golden monkey (Rhinopithecus roxellana) is here evaluated by univariate, bivariate, and multivariate analyses. Allometric analyses indicate that canines and P3s are positively, but other dimensions negatively scaled to mandible and maxilla, and to body size. With the exception of the mesiodistal dimensions of I₁ and M₃, and the buccolingual dimension of P₄, mandibular dental variables show similar scaling relative to body size. Analysis of residuals shows that males have significantly larger canine, P³ and buccolingual dimensions of the postcanine teeth (M² and M³) than females. A significant difference in shape between the sexes is found in the buccolingual dimension of the upper teeth, but not in the mandible. Unlike the situation in some other species, female golden monkeys do not exhibit relatively larger postcanine teeth than males. In fact, the reverse is true, expecially for M²s and M³s. The fact that most of the dental variables show low negative allometry to body size might be related a cold environment that has led to the development of larger body size with reduced energy loss. When the raw data are examined by Discriminant Function Analysis the sexes are clearly distinguishable.     

A twin study of dental dimension. II. Independent genetic determinants

To demonstrate the presence of independent genetic determinants of multiple correlated tooth dimensions from twin data, a multivariate analysis was performed on the covariance matrices of monozygotic and dizygotic within-pair differences for mesiodistal and buccolingual dimensions of 28 teeth of the secondary dentition. The results provided strong evidences that the correlation among tooth dimensions is primarily genetic in origin, probably attributable to the pleiotropic action of either independent genes or groups of genes. Among the genetic factors that were identified, one appeared to affect the maxillary teeth in general while a second influenced primarily the anterior mandibular teeth. There was a striking tendency for homologous measurements on the right and left sides to be associated with the same genetic factor. In contrast, genetic determination of the maxillary and mandibular dentition seemed to be independent of each other, and a wider range of genetic factors were found to influence the mandibular than the maxillary teeth, suggesting that a differential degree of evolutionary stability may have been achieved in the teeth of the two jaws.     

Tooth dimensions of Southern Chinese.

Teeth in casts of a random sample from the Hong Kong Oral Health Survey of 12-year-old children (n=459; 295 boys and 164 girls) were measured in the mesiodistal, buccolingual, and clinical crown height dimensions. Sexual dimorphism was evident in all tooth types in nearly all tooth dimensions, with the exception of the mesiodistal dimension of mandibular central incisors. The Chinese male tooth dimensions were larger than in females in nearly all characters. The measurements were compared with other human groups. Results showed that the Southern Chinese had larger tooth dimensions than the Japanese and than the White Americans. Hence it is important to have data concerning a relevant human group for purposes of clinical diagnosis and planning of treatment. These data may also be useful in forensic dentistry.     

Odontometric variations of permanent crown in Punjabi and U.S. twins

The study reports odontometric variations within and between Punjabi and U.S. twins. The data are based on 23 MZ and 35 DZ Punjabi twin pairs and 32 MZ and 43 DZ U.S. pairs. None of the t' tests indicates differences between MZ and DZ mean dental dimensions in either sample. Mean tooth dimensions of Punjabi twins are in general greater than those of U.S. twins with significant differences for about 25% of the traits. Coefficient of variation is highest in lateral incisors and canines and lowest in first molars in both samples. The two samples differ more in their variances than in their means. The results indicate that buccolingual dimensions of mandibular traits are under relatively greater selection pressure.     

Morphological changes in the central sulcus of children with isolated growth hormone deficiency versus idiopathic short stature

In this study, the morphological changes in the central sulcus between children with isolated growth hormone deficiency (IGHD) and those with idiopathic short stature (ISS) were analyzed. Thirty children with IGHD (peak growth hormone < 5 µg/L) and 30 children with ISS (peak growth hormone > 10.0 µg/L) were included. Morphological measurements of the central sulcus were obtained from T1‐weighted MRIs using BrainVISA, including the average sulcal width, maximum depth, average depth, top length, bottom length, and depth position‐based profiles (DPPs). The bilateral average width of the central sulci was significantly wider, while the left maximum depth and right average depth of the central sulcus were significantly smaller, in children with IGHD than in children with ISS. There were no significant differences in the right maximum depth, left average depth, or bilateral top length and bottom length of the central sulcus between groups. The DPPs of the middle part of both central sulci (corresponding to the hand motor activation area) and the inferior part of the right central sulcus (corresponding to the oral movement area) near the Sylvian fissure were significantly smaller in children with IGHD than in controls before false discovery rate (FDR) correction. However, all the above significant DPP sites disappeared after FDR correction. There were significant morphological changes in the three‐dimensional structure of the central sulcus in children with IGHD, which were the outcome of other more essential cortical or subcortical changes, resulting in their relatively slower development in motor, cognitive, and linguistic functional performance.     

Hyoid and pharyngeal arch function during ventilation and feeding in elasmobranchs: Conservation and modification in function

The hypothesis that the mandibular and hyoid arches evolved from anterior pharyngeal arches to increase ventilation performance and subsequently became adapted for feeding is widely accepted. As jaws evolved, the morphology of the hyoid arch changed notably from that of a pharyngeal arch. Furthermore, hyoid arch morphology varies considerably among elasmobranch taxa and has been shown to be related to feeding style. The goal of this study is to determine whether the function (direction of movement or change in cavity cross‐section) of the hyoid arch is altered from that of the pharyngeal arch, and whether function is altered between ventilation, the basal behavior, and feeding, the derived behavior. Similar effects and associations of the pharyngeal arches by orientation to feeding or ventilation are also investigated. The kinematics of the hyoid and second pharyngeal arch during ventilation and feeding are quantified using sonomicrometry and hyomandibular angle measured in five shark and one skate species representing widely divergent hyomandibular morphologies. Hyoid and pharyngeal cavity width follows the same pattern of movement during ventilation; therefore the hyoid arch retains the ancestral function of the pharyngeal arches. The orientation of the hyomandibular cartilage appears to influence the pattern of arch movement during ventilation: anterior directed elements decrease in cavity width; laterally directed elements increase in cavity width; while posterior directed elements increase in cavity width or do not change; while cavity depth increases in all species. Hyoid and pharyngeal cavity width movement differs among the species during feeding and also appears to be related to hyoid arch orientation as well as feeding style. There appears to be a division between those species with hyomandibular angles less than 110° from those that are greater between feeding mode and hyoid cavity width movement. Primarily suction feeding species decrease hyoid cavity width whereas primarily bite feeding species increase hyoid cavity width during feeding while all species increase hyoid cavity depth.     

Tooth components of mandibular deciduous molars of Homo sapiens sapiens and Homo sapiens neanderthalensis: a radiographic study.

Tooth components of deciduous molars were measured from standardized radiographs of Homo sapiens sapiens and Homo sapiens neanderthalensis. Enamel height and width were greater in deciduous teeth of Homo sapiens sapiens than in Homo sapiens neanderthalensis and the differences were statistically significant (p less than 0.01). Dentin height showed no significant differences between the two groups, but enamel to floor of pulp chamber and pulp height and width dimensions were significantly greater in Homo sapiens neanderthalensis. Discriminant analysis carried out between groups, using deciduous tooth components, showed an accuracy of 98-100% for identification of Homo sapiens sapiens and 83-92% for identification of Homo sapiens neanderthalensis. The results obtained in this study on dental dimensions support the hypothesis of a distinct evolutionary line for Neanderthals.     

Congenital defects of the upper lateral incisors: Multivariate analysis of measurements of the other teeth,the superior arch,head and face

The survey of a French male population allowed us to ascertain 75 propositi with one or two missing ULI, 59 propositi with one or two reduced ULI and 99 controls on whom measurements (mesiodistal and buccolingual diameters) of all teeth of the superior arch are available. Principal Component Analysis gave a first estimated principal component highly correlated with each of the dental measurements or arch measurements. This size factor was eliminated by observing the plane of the second and third principal components. Strikingly different clusters of MD diameters or BL diameters were observed for the controls, the propositi missing one or two of the ULI and the propositi with reduced ULI. For the controls, the arch length is correlated with the MD molar diameters and the MD incisor diameter, the arch width being isolated from the other measurements. For the propositi with missing ULI, among the dental measurements the MD and BL diameters cluster, the arch length is isolated as are the arch widths. For the propositi with reduced ULI, the arch length is closer to the dental measurements while the widths, especially the first one, are isolated. The best discriminant measurements are the diameters of the first premolars and the canine, the first arch width and the arch length. Among controls, the arch is narrowed and shorter for the propositi with absence and wider for the propositi with reduction. Teeth measurements are always smaller in propositi.     

A study of the taxonomic significance of the dental arch.

Sixteen dimensions were measured from the maxillary and mandibular dental arches of different ethnic groups of man, apes and monkeys. Multivariate analysis showed that discrimination was possible among the ethnic groups of man on the one hand and between the ape and monkey samples on the other. Nevertheless, the actual degree of discrimination between the primate samples depended upon whether the maxillary or mandibular arch dimensions were analysed. Furthermore, subsequent inclusion of the dental arch dimensions of fossil hominoid samples into the analysis confirmed the taxonomic significance of the dental arch, although its importance must await the acquisition of the more non-human primate data.     

Metric and morphological variability in the dentition of Colobine monkeys

A morphological study was performed using 97 Colobus polykomos and 41 Nasalis larvatus. The premolars and molars of these two taxa of leaf-eating monkeys were similar in that they possessed deeply grooved and highly pointed cusps. Of 7 dental traits investigated, 4 were significantly different between the 2 forms. Indeed, with 2 of these, the position of the lingual cusp on PM₄ and the number of cusps on PM³ displayed highly contrasting structures.Metric analysis was conducted using 47 C. polykomos and 37 N. larvatus specimens. Mesiodistal and buccolingual measurements were taken on the upper canine and all postcanine teeth. Sexual dimorphism was detected in most maxillary dental measurements and all mandibular estimates of both species. In all cases, males exceeded females in tooth diameter. Testing between species by sex revealed that C. polykomos was significantly larger in several canine and premolar dimensions while N. larvatus had significantly larger molar dimensions. An additional 73 measurements were selected to represent occluding dental structures and a morphological integration analysis was conducted. Results of this analysis indicated that C. polykomos possessed a C¹-PM₃ complex which was more highly intercorrelated whereas the broad lophed N. larvatus molars constituted a more highly correlated functional unit.It was suggested that the above differences between these two groups of leaf-eating monkeys probably resulted from inbreeding, isolation and drift.     

Sexual dimorphism in crown units of mandibular deciduous and permanent molars in Australian Aborigines.

Sexual differences in the crown units of mandibular molars were investigated in Australian Aborigines. The first and second deciduous molars (dm1 and dm2), and first to third permanent molars (M1, M2 and M3) were measured on dental casts using a sliding caliper. Measurements of tooth crowns included overall mesiodistal and buccolingual diameters, as well as the mesiodistal and buccolingual diameters of the trigonid and talonid. Percentage dimorphism values were greater in the talonid dimensions than the trigonid, indicating that sex differences tend to be larger in the later-developing crown units. Sex differences in mesiodistal diameters increased from dm1 to M2 but decreased for M3, the tooth that showed the least dimorphism of all the molars. This result seems to be due to the marked variability in size of the M3 between individuals.     

The assessment of fluctuating odontometric asymmetry from incomplete hominid fossil data

Problems of small sample size and incompleteness of fossil data in the evaluation of metric asymmetry may be overcome by the application of cluster sampling techniques together with factorial analyses of variance. Degrees of fluctuating odontometric asymmetry are reported in Australopithecus, Homo erectus and Homo neanderthalensis. In all three populations mesiodistal dimensions were shown to be more asymmetric than buccolingual dimensions, with maxillary teeth exhibiting significantly greater degrees of asymmetry than mandibular teeth. Neanderthal teeth were significantly more metrically asymmetric than those of either Australopithecus or H. erectus, with population differences in asymmetry centered in the maxillary teeth.     

Comparative study of mesiodistal crown diameters and arch dimensions between indigenous British and Pakistani immigrant populations

Over the last two decades, the United Kingdom has seen an increase in the number of immigrants from the Indian subcontinent, mainly Pakistan. The amount of information that is available regarding parameters such as mesiodistal crown diameters and dental arch dimensions is, however, somewhat limited for this population. An investigation was carried out to compare corresponding mesiodistal crown diameters and arch dimensions between samples of the indigenous British population in Leeds (England) and the Pakistani immigrant population living in Rochdale (England). Measurements were taken from dental casts. The results showed that there were no significant differences between the two ethnic groups in corresponding mesiodistal crown diameters or arch dimensions. Data are provided for the Pakistani immigrant population in Britain.