共查询到20条相似文献,搜索用时 31 毫秒
1.
A homogeneous cellulose-binding module(CBM)of cellobiohydrolase I(CBHI)from Trichoderma pseudokoningii S-38 was obtained by the limited proteolysis with papain and a series of chromatographs filtration.Analysis of FT-IR spectra demonstrated that the structural changes result from a weakening and splitting of the hydrogen bond network in cellulose by the action of CBMCBHI at 40℃for 24 h.The results of molecular dynamic simulations are consistent with the experimental conclusions, and provide a nanoscopic view of the mechanism that strong and medium H-bonds decreased dramatically when CBM was bound to the cellulose surface.The function of CBMCBHI is not only limited to locating intact CBHI in close proximity with cellulose fibrils,but also is involved in the structural disruption at the fibre surface.The present studies provided considerable evidence for the model of the intramolecular synergy between the catalytic domain and their CBMs. 相似文献
2.
Hiroto Nishijima Kouichi Nozaki Masahiro Mizuno Tsutomu Arai 《Bioscience, biotechnology, and biochemistry》2013,77(5):738-746
The xylanase (Xyn10B) that strongly adsorbs on microcrystalline cellulose was isolated from Driselase. The Xyn10B contains a Carbohydrate-binding module family 1 (CBM1) (IrpCBMXyn10B) at N-terminus. The canonical essential aromatic residues required for cellulose binding were conserved in IrpCBMXyn10B; however, its adsorption ability was markedly higher than that typically observed for the CBM1 of an endoglucanase from Trametes hirsuta (ThCBMEG1). An analysis of the CBM-GFP fusion proteins revealed that the binding capacity to cellulose (7.8 μmol/g) and distribution coefficient (2.0 L/μmol) of IrpCBMXyn10B-GFP were twofold higher than those of ThCBMEG1-GFP (3.4 μmol/g and 1.2 L/μmol, respectively), used as a reference structure. Besides the canonical aromatic residues (W24-Y50-Y51) of typical CBM1-containing proteins, IrpCBMXyn10B had an additional aromatic residue (Y52). The mutation of Y52 to Ser (IrpCBMY52S-GFP) reduced these adsorption parameters to 4.4 μmol/g and 1.5 L/μmol, which were similar to those of ThCBMEG1-GFP. These results indicate that Y52 plays a crucial role in strong cellulose binding. 相似文献
3.
Abstrfsact The β-1,3(4)-glucanase A (GluA)-encoding gene named gluA was cloned from the genomic library of a marine bacterium Pseudomonas sp. PE2 by expression in Escherichia coli, and the complete DNA sequence was determined. The recombinant enzyme from Pseudomonas sp. PE2 was examined to determine the essential enzymes for degrading Pythium porphyrae cell walls, comparatively using other two recombinant enzymes, chitinase A and β-1,3-glucanase B from the same bacterial strain. GluA most degraded the cell walls among these three enzymes, suggesting that GluA seems to be most important to P. porphyrae cell-wall-degrading activity. The deduced GluA is a modular enzyme composed of an N-terminal signal peptide, the tandem-duplicated carbohydrate-binding module family 6 (CBMGluA-1 and CBMGluA-2), and a glycoside hydrolase family 16 catalytic domain. Deletion analysis clearly indicated that GluA lacking CBMGluA-1 and CBMGluA-2 does not bind to Avicel and xylan. These results suggest that the tandem-repeated CBM of GluA may play a key role in the binding of Avicel and xylan as well as β-1,3- and β-1,3;1,4-glucans and is very important to bind to insoluble polysaccharides. 相似文献
4.
Dharanidaran Jayachandran Peter Smith Mohammad Irfan Junhong Sun John M. Yarborough Yannick J. Bomble Eric Lam Shishir P. S. Chundawat 《Biotechnology and bioengineering》2023,120(8):2253-2268
Carbohydrate binding modules (CBMs) are noncatalytic domains that assist tethered catalytic domains in substrate targeting. CBMs have therefore been used to visualize distinct polysaccharides present in the cell wall of plant cells and tissues. However, most previous studies provide a qualitative analysis of CBM-polysaccharide interactions, with limited characterization of engineered tandem CBM designs for recognizing polysaccharides like cellulose and limited application of CBM-based probes to visualize cellulose fibrils synthesis in model plant protoplasts with regenerating cell walls. Here, we examine the dynamic interactions of engineered type-A CBMs from families 3a and 64 with crystalline cellulose-I and phosphoric acid swollen cellulose. We generated tandem CBM designs to determine various characteristic properties including binding reversibility toward cellulose-I using equilibrium binding assays. To compute the adsorption (nkon) and desorption (koff) rate constants of single versus tandem CBM designs toward nanocrystalline cellulose, we employed dynamic kinetic binding assays using quartz crystal microbalance with dissipation. Our results indicate that tandem CBM3a exhibited the highest adsorption rate to cellulose and displayed reversible binding to both crystalline/amorphous cellulose, unlike other CBM designs, making tandem CBM3a better suited for live plant cell wall biosynthesis imaging applications. We used several engineered CBMs to visualize Arabidopsis thaliana protoplasts with regenerated cell walls using confocal laser scanning microscopy and wide-field fluorescence microscopy. Lastly, we also demonstrated how CBMs as probe reagents can enable in situ visualization of cellulose fibrils during cell wall regeneration in Arabidopsis protoplasts. 相似文献
5.
Ruizhi Han Jianghua Li Hyun-Dong Shin Rachel R. Chen Guocheng Du Long Liu Jian Chen 《Applied and environmental microbiology》2013,79(10):3234-3240
In this study, we achieved the efficient synthesis of 2-O-d-glucopyranosyl-l-ascorbic acid (AA-2G) from soluble starch by fusing a carbohydrate-binding module (CBM) from Alkalimonas amylolytica α-amylase (CBMAmy) to cyclodextrin glycosyltransferase (CGTase) from Paenibacillus macerans. One fusion enzyme, CGT-CBMAmy, was constructed by fusing the CBMAmy to the C-terminal region of CGTase, and the other fusion enzyme, CGTΔE-CBMAmy, was obtained by replacing the E domain of CGTase with CBMAmy. The two fusion enzymes were then used to synthesize AA-2G from soluble starch as a cheap and easily soluble glycosyl donor. Under the optimal conditions, the AA-2G yields produced using CGTΔE-CBMAmy and CGT-CBMAmy were 2.01 g/liter and 3.03 g/liter, respectively, which were 3.94- and 5.94-fold of the yield from the wild-type CGTase (0.51 g/liter). The reaction kinetics of the two fusion enzymes were analyzed and modeled to confirm the enhanced specificity toward soluble starch. It was also found that, compared to the wild-type CGTase, the two fusion enzymes had relatively high hydrolysis and disproportionation activities, factors that favor AA-2G synthesis. Finally, it was speculated that the enhancement of soluble starch specificity may be related to the changes of substrate binding ability and the substrate binding sites between the CBM and the starch granule. 相似文献
6.
Cellobiohydrolase I (CBHI) is the major cellulase of Trichoderma reesei. The enzyme contains a discrete cellulose-binding domain (CBD), which increases its binding and activity on crystalline cellulose. We studied cellulase-cellulose interactions using site-directed mutagenesis on the basis of the three-dimensional structure of the CBD of CBHI. Three mutant proteins which have earlier been produced in Saccharomyces cerevisiae were expressed in the native host organism. The data presented here support the hypothesis that a conserved tyrosine (Y492) located on the flat and more hydrophilic surface of the CBD is essential for the functionality. The data also suggest that the more hydrophobic surface is not directly involved in the CBD function. The pH dependence of the adsorption revealed that electrostatic repulsion between the bound proteins may also control the adsorption. The binding of CBHI to cellulose was significantly affected by high ionic strength suggesting that the interaction with cellulose includes a hydrophobic effect. High ionic strength increased the activity of the isolated core and of mutant proteins on crystalline cellulose, indicating that once productively bound, the enzymes are capable of solubilizing cellulose even with a mutagenized or with no CBD. © 1995 Wiley-Liss, Inc. 相似文献
7.
Cellobiohydrolase genes cbhI and cbhII were isolated from Trichoderma viride AS3.3711 and T. viride CICC 13038, respectively, using RT-PCR technique. The cbhI gene from T. viride AS3.3711 contains 1,542 nucleotides and encodes a 514-amino acid protein with a molecular weight of approximately 53.96 kDa.
The cbhII gene from T. viride CICC 13038 was 1,413 bp in length encoding 471 amino acid residues with a molecular weight of approximately 49.55 kDa. The
CBHI protein showed high homology with enzymes belonging to glycoside hydrolase family 7 and CBHII is a member of Glycoside
hydrolase family 6. CBHI and CBHII play a role in the conversion of cellulose to glucose by cutting the disaccharide cellobiose
from the non-reducing end of the cellulose polymer chain. The two cellobiohydrolase (CBHI, CBHII) genes were successfully
expressed in Saccharomyces cerevisiae H158. Maximal activities of transformants Sc-cbhI and Sc-cbhII were 0.03 and 0.089 units ml−1 under galactose induction, respectively. The optimal temperatures of the recombinant enzymes (CBHI, CBHII) were 60 and 70°C,
respectively. The optimal pHs of recombinant enzymes CBHI and CBHII were at pH 5.8 and 5.0, respectively. 相似文献
8.
Takeshi Kawakubo Shuichi Karita Yuko Araki Shota Watanabe Masafumi Oyadomari Rie Takada Fumio Tanaka Kentaro Abe Takahito Watanabe Yoichi Honda Takashi Watanabe 《Biotechnology and bioengineering》2010,105(3):499-508
In enzymatic saccharification of lignocellulosics, the access of the enzymes to exposed cellulose surfaces is a key initial step in triggering hydrolysis. However, knowledge of the structure–hydrolyzability relationship of the pretreated biomass is still limited. Here we used fluorescent‐labeled recombinant carbohydrate‐binding modules (CBMs) from Clostridium josui as specific markers for crystalline cellulose (CjCBM3) and non‐crystalline cellulose (CjCBM28) to analyze the complex surfaces of wood tissues pretreated with NaOH, NaOH–Na2S (kraft pulping), hydrothermolysis, ball‐milling, and organosolvolysis. Japanese cedar wood, one of the most recalcitrant softwood species was selected for the analysis. The binding analysis clarified the linear dependency of the exposure of crystalline and non‐crystalline cellulose surfaces for enzymatic saccharification yield by the organosolv and kraft delignification processes. Ball‐milling for 5–30 min increased saccharification yield up to 77%, but adsorption by the CjCBM–cyan fluorescent proteins (CFPs) was below 5%. Adsorption of CjCBM–CFPs on the hydrothermolysis pulp were less than half of those for organosolvolysis pulp, in coincidence with low saccharification yields. For all the pretreated wood, crystallinity index was not directly correlated with the overall saccharification yield. Fluorescent microscopy revealed that CjCBM3–CFP and CjCBM28–CFP were site‐specifically adsorbed on external fibrous structures and ruptured or distorted fiber surfaces. The assay system with CBM–CFPs is a powerful measure to estimate the initiation sites of hydrolysis and saccharification yields from chemically delignified wood pulps. Biotechnol. Bioeng. 2010; 105: 499–508. © 2009 Wiley Periodicals, Inc. 相似文献
9.
纤维二糖水解酶I(CBHI)是生物降解纤维素的一种重要的外切酶,它作用于纤维素分子末端,水解β-1,4-糖苷键。纤维二糖水解酶由3个部分组成:具有催化活性的催化结构域,作用为锚定纤维素的纤维素结合域以及连接这两个结构域的一段短肽。已知催化结构域属于糖基水解酶家族7(GH7),纤维素结合域属于糖类结合模块家族1(CBMl)。为进一步探索CBHI编码基因之间的进化关系,本研究依据CBHI的结构域在GenBank数据库中搜索并鉴定CBHI编码基因并据此构建系统发育树。序列的平均长度为1776bp,平均GC含量为57.64%,平均转换颠换比为0.71,平均遗传距离为0.424。得出结论CBHI编码基因只存在于真菌中,是一个相对活跃的基因,它的进化与物种的进化有着密切的关系。 相似文献
10.
N- or C-terminal fusions of red-fluorescent protein (RFP) with various fungal cellulose-binding domains (CBDs) belonging to carbohydrate binding module (CBM) family 1 were expressed in a Pichia pastoris expression system, and the resulting fusion proteins were used to examine the feasibility of large-scale affinity purification of CBD-tagged proteins on cellulose columns. We found that RFP fused with CBD from Trichoderma reesei CBHI (CBD(Tr)(CBHI)) was expressed at up to 1.2g/l in the culture filtrate, which could be directly injected into the cellulose column. The fusion protein was tightly adsorbed on the cellulose column in the presence of a sufficient amount of ammonium sulfate and was efficiently eluted with pure water. Bovine serum albumin (BSA) was not captured under these conditions, whereas both BSA and the fusion protein were adsorbed on a phenyl column, indicating that the cellulose column can be used for the purification of not only hydrophilic proteins but also for hydrophobic proteins. Recovery of various fusion proteins exceeded 80%. Our results indicate that protein purification by expression of a target protein as a fusion with a fungal family 1 CBD tag in a yeast expression system, followed by affinity purification on a cellulose column, is simple, effective and easily scalable. 相似文献
11.
Markus Alahuhta 《Journal of molecular biology》2010,402(2):374-13720
The crystal structure of the carbohydrate-binding module (CBM) 4 Ig fused domain from the cellulosomal cellulase cellobiohydrolase A (CbhA) of Clostridium thermocellum was solved in complex with cellobiose at 2.11 Å resolution. This is the first cellulosomal CBM4 crystal structure reported to date. It is similar to the previously solved noncellulosomal soluble oligosaccharide-binding CBM4 structures. However, this new structure possesses a significant feature—a binding site peptide loop with a tryptophan (Trp118) residing midway in the loop. Based on sequence alignment, this structural feature might be common to all cellulosomal clostridial CBM4 modules. Our results indicate that C. thermocellum CbhA CBM4 also has an extended binding pocket that can optimally bind to cellodextrins containing five or more sugar units. Molecular dynamics simulations and experimental binding studies with the Trp118Ala mutant suggest that Trp118 contributes to the binding and, possibly, the orientation of the module to soluble cellodextrins. Furthermore, the binding cleft aromatic residues Trp68 and Tyr110 play a crucial role in binding to bacterial microcrystalline cellulose (BMCC), amorphous cellulose, and soluble oligodextrins. Binding to BMCC is in disagreement with the structural features of the binding pocket, which does not support binding to the flat surface of crystalline cellulose, suggesting that CBM4 binds the amorphous part or the cellulose “whiskers” of BMCC. We propose that clostridial CBM4s have possibly evolved to bind the free-chain ends of crystalline cellulose in addition to their ability to bind soluble cellodextrins. 相似文献
12.
Szijártó N Siika-Aho M Tenkanen M Alapuranen M Vehmaanperä J Réczey K Viikari L 《Journal of biotechnology》2008,136(3-4):140-147
Three thermostable neutral cellulases from Melanocarpus albomyces, a 20-kDa endoglucanase (Cel45A), a 50-kDa endoglucanase (Cel7A), and a 50-kDa cellobiohydrolase (Cel7B) heterologously produced in a recombinant Trichoderma reesei were purified and studied in hydrolysis (50 degrees C, pH 6.0) of crystalline and amorphous cellulose. To improve their efficiency, M. albomyces cellulases naturally harboring no cellulose-binding module (CBM) were genetically modified to carry the CBM of T. reesei CBHI/Cel7A, and were studied under similar experimental conditions. Hydrolysis performance and product profiles were used to evaluate hydrolytic features of the investigated enzymes. Each cellulase proved to be active against the tested substrates; the cellobiohydrolase Cel7B had greater activity than the endoglucanases Cel45A and Cel7A against crystalline cellulose, whereas in the case of amorphous substrate the order was reversed. Evidence of synergism was observed when mixtures of the novel enzymes were applied in a constant total protein dosage. Presence of the CBM improved the hydrolytic potential of each enzyme in all experimental configurations; it had a greater effect on the endoglucanases Cel45A and Cel7A than the cellobiohydrolase Cel7B, especially against crystalline substrate. The novel cellobiohydrolase performed comparably to the major cellobiohydrolase of T. reesei (CBHI/Cel7A) under the applied experimental conditions. 相似文献
13.
A cellulose-binding protein of 105 kDa (CBP105) from Cellulomonas flavigena was purified and its gene was cloned. CBP105 is a processive endoglucanase with maximum activity on carboxymethyl cellulose
(CMC) at pH 7.5 and 60°C. Limited proteolysis suggested that CBP105 is composed of one catalytic domain (CD) and two carbohydrate-binding
modules (CBM). The nucleotide sequence of the cbp105 gene (AY729806) indicates that CBP105 is a modular enzyme with a family 9 glycoside hydrolase CD linked to a family 3 CBM,
two fibronectin III-like domains and a family 2 CBM. This structural organization may be responsible for CBP105 processive
CMC degradation. 相似文献
14.
Conformational changes to 1,4-β-D-glucan cellobiohydrolase I (CBHI) in response to its binding with p-nitrophenyl β-D-cellobioside (PNPC) were analyzed by second-derivative fluorescence spectrometry at the saturation binding point. Irreversible
changes to the configuration of PNPC during the course of the binding process were characterized by UV spectral analysis.
Isothermal titration calorimetry (ITC) was used to determine the stoichiometry of binding (i.e. the number of molar binding
sites) of PNPC to CBHI. Two points on the surface of the CBHI molecule interact with PNPC, and irreversible changes to the
configuration of PNPC occur during its conversion to p-nitrophenyl (PNP). The ITC studies demonstrated that the binding of PNPC to CBHI is an irreversible process, in which heat
is released, but where there is no reversible equilibrium between PNPC-CBHI and CBHI and PNPC. On the other hand, PNP and
cellobiose need to be released from the PNPC-CBHI complex to facilitate the repeated binding of new PNPC molecules to the
renewable CBHI molecules. Therefore, we speculate that the energy, which powers the configurational change of PNPC as it is
converted to PNP, is generated from cyclic changes in the conformation of CBHI during the binding/de-sorption process. These
new insights may provide a basis for a better understanding of the binding mechanism in enzyme-substrate interactions. 相似文献
15.
Alina Iulia Chiriac Edith Marleny Cadena Teresa Vidal Antonio L. Torres Pilar Diaz F. I. Javier Pastor 《Applied microbiology and biotechnology》2010,86(4):1125-1134
Cel9B from Paenibacillus barcinonensis is a modular endoglucanase with a novel molecular architecture among family 9 enzymes that comprises a catalytic domain (GH9),
a family 3c cellulose-binding domain (CBM3c), a fibronectin III-like domain repeat (Fn31,2), and a C-terminal family 3b cellulose-binding domain (CBM3b). A series of truncated derivatives of endoglucanase Cel9B have
been constructed and characterized. Deletion of CBM3c produced a notable reduction in hydrolytic activity, while it did not
affect the cellulose-binding properties as CBM3c did not show the ability to bind to cellulose. On the contrary, CBM3b exhibited
binding to cellulose. The truncated forms devoid of CBM3b lost cellulose-binding ability and showed a reduced activity on
crystalline cellulose, although activity on amorphous celluloses was not affected. Endoglucanase Cel9B produced only a small
ratio of insoluble products from filter paper, while most of the reducing ends produced by the enzyme were released as soluble
sugars (91%), indicating that it is a processive enzyme. Processivity of Cel9B resides in traits contained in the tandem of
domains GH9–CBM3c, although the slightly reduced processivity of truncated form GH9–CBM3c suggests a minor contribution of
domains Fn31,2 or CBM3b, not contained in it, on processivity of endoglucanase Cel9B. 相似文献
16.
Conformational changes to 1,4-β-D-glucan cellobiohydrolase I (CBHI) in response to its binding with p-nitrophenyl β-D-cellobioside (PNPC) were analyzed by second-derivative fluorescence spectrometry at the saturation binding point. Irreversible changes to the configuration of PNPC during the course of the binding process were characterized by UV spectral analysis. Isothermal titration calorimetry (ITC) was used to determine the stoichiometry of binding (i.e. the number of molar binding sites) of PNPC to CBHI. Two points on the surface of the CBHI molecule interact with PNPC, and irreversible changes to the configuration of PNPC occur during its conversion to p-nitrophenyl (PNP). The ITC studies demon-strated that the binding of PNPC to CBHI is an irreversible process, in which heat is released, but where there is no reversible equilibrium between PNPC-CBHI and CBHI and PNPC. On the other hand, PNP and cellobiose need to be released from the PNPC-CBHI complex to facilitate the repeated binding of new PNPC molecules to the renewable CBHI molecules. Therefore, we speculate that the energy, which powers the configurational change of PNPC as it is converted to PNP, is generated from cyclic changes in the conformation of CBHI during the binding/de-sorption process. These new insights may provide a basis for a better understanding of the binding mechanism in enzyme-substrate interactions. 相似文献
17.
Characterization of Thermobifida fusca Cutinase-Carbohydrate-Binding Module Fusion Proteins and Their Potential Application in Bioscouring 总被引:2,自引:0,他引:2
Yao Zhang Sheng Chen Meng Xu Artur Cavoco-Paulo Jing Wu Jian Chen 《Applied and environmental microbiology》2010,76(20):6870-6876
Cutinase from Thermobifida fusca is thermally stable and has potential application in the bioscouring of cotton in the textile industry. In the present study, the carbohydrate-binding modules (CBMs) from T. fusca cellulase Cel6A (CBMCel6A) and Cellulomonas fimi cellulase CenA (CBMCenA) were fused, separately, to the carboxyl terminus of T. fusca cutinase. Both fusion enzymes, cutinase-CBMCel6A and cutinase-CBMCenA, were expressed in Escherichia coli and purified to homogeneity. Enzyme characterization showed that both displayed similar catalytic properties and pH stabilities in response to T. fusca cutinase. In addition, both fusion proteins displayed an activity half-life of 53 h at their optimal temperature of 50°C. Compared to T. fusca cutinase, in the absence of pectinase, the binding activity on cotton fiber was enhanced by 2% for cutinase-CBMCel6A and by 28% for cutinase-CBMCenA, whereas in the presence of pectinase, the binding activity was enhanced by 40% for the former and 45% for the latter. Notably, a dramatic increase of up to 3-fold was observed in the amount of released fatty acids from cotton fiber by both cutinase-CBM fusion proteins when acting in concert with pectinase. This is the first report of improving the scouring efficiency of cutinase by fusing it with CBM. The improvement in activity and the strong synergistic effect between the fusion proteins and pectinase suggest that they may have better applications in textile bioscouring than the native cutinase.Cotton fiber has a multilayered structure, with its outermost surface being the cuticle that is cross-linked to the primary cell wall of cotton fiber by esterified pectin substances. The major component of the cuticle is cutin, an insoluble polyester composed mainly of saturated C16 and C18 hydroxy and epoxy fatty acids (14, 16, 27, 38). During the process of scouring in the textile industry, the cuticle layer has to be removed in order to improve the wettability of cotton fiber, which then facilitates uniform dyeing and finishing. Traditionally, this process is performed by hot hydrolysis in alkaline medium, which not only consumes large quantities of water and energy but also causes severe pollution and fiber damage (20, 21, 33). Therefore, environment-friendly scouring methods based on biocatalysts have been actively sought (2, 30, 36).Cutinase is a multifunctional esterase capable of degrading the cutin component of the cuticle. Earlier reports showed that the fungal cutinase from Fusarium solani pisi has potential use for cotton cuticle degradation and exhibits a good synergistic effect with pectinase, an enzyme utilized to degrade pectin, in the scouring of cotton fiber (1, 7, 8, 14). Moreover, site-directed mutagenesis has been performed to replace the specific amino acid residues near the active site of cutinase (3) to improve its hydrolytic activity toward polyesters. More recently, a cutinase from the thermophilic bacterium Thermobifida fusca has been identified and overexpressed in Escherichia coli in our laboratory (10). The good thermal stability and alkali resistance of this recombinant T. fusca cutinase make it potentially more amenable to textile bioscouring (10).To further improve the applicability and/or catalytic efficiency of T. fusca cutinase, the present study attempts to engineer a novel cutin-degrading enzyme, based on analysis of the surface structure of cotton fiber. It has been observed that, in addition to cutin, pectin, proteins and other components, there is also a large amount of cellulose on the surface layer of cotton fiber (23). Thus, it is tempting to hypothesize that if the enzyme can be engineered to specifically bind to cellulose through a “gain of function” modification, its concentration on the surface of cotton fiber could increase significantly. Subsequently, its catalytic efficiency for cutin breakdown could be improved due to a proximity effect. In order to design such an enzyme, a fusion protein strategy in which a cellulose-binding protein/module will be attached to cutinase is considered.It is well known that cellulase is capable of binding specifically to cellulose (25, 31). This enzyme has two separate modules: a catalytic module and a carbohydrate-binding module (CBM) (11). The two modules are discrete structural and functional units usually connected by a flexible linker (5, 17, 28). CBM has high specific capacities for cellulose binding. Previously, it has been reported that CBM is able to be fused to a chosen target protein by genetic manipulation (36), resulting in enhanced binding of this fusion protein to cellulose (6, 29). For example, fusion proteins were constructed by fusing CBM to β-glucose nucleotide enzyme (GUS) (13) or β-glycosidase (BglA) (19), which facilitates biochemical analysis of scouring efficiency for cotton fabrics.In the present study, the CBM from T. fusca cellulase Cel6A (CBMCel6A) and the CBM from Cellulomonas fimi cellulase CenA (CBMCenA) were fused, separately, to the carboxyl terminus of T. fusca cutinase. The resulting fusion enzymes were compared to the native cutinase in terms of their biochemical properties, as well as the catalytic efficiency in cutin breakdown on cotton fiber. This is the first report of improving the scouring efficiency of cutinase by fusing it with CBM. 相似文献
18.
Mingyu Wang Yanan Ma Ling Li Bianfang Wang Xin Wei Mengge Zhang Juan Wang Qingyu Cui Zhiqiang Li Hai Xu 《Biochemical and biophysical research communications》2019,508(3):818-824
Cellulases are glycosylated enzymes that have wide applications in fields like biofuels. It has been widely accepted that glycosylation of cellulases impact their performance. Trichoderma reesei is the most important cellulase-producer and cellobiohydrolase I (CBHI) is the most important cellulase from T. reesei. Therefore, the glycosylation of T. reesei CBHI has been a focus of research. However, investigations have been focused on N-glycosylation of three of the four potential glycosylation sites, as well as O-glycosylation on the linker region, while a full picture of glycosylation of T. reesei CBHI is still needed. In this work, with extensive mass spectrometric investigations on CBHI from two T. reesei strains grown under three conditions, several new discoveries were made: 1) N45 and N64 are N-glycosylated with high mannose type glycans; 2) the catalytic domain of CBHI is extensively O-glycosylated with hexoses and N-acetylhexosamines; 3) experimental evidence on the mannosylation of carbohydrate binding domain (other than the linker adjacent region) was found. With structural analysis, we found several glycosylation sites (such as T383, S8, and S46) are located at the openings of the substrate-binding tunnel, and potentially involve in the binding of cellulose. These investigations provide a full and comprehensive picture on the glycosylation of CBHI from T. reesei, which benefits the engineering of CBHI by raising potential sites for modification. 相似文献
19.
Structural basis for cellulose binding by the type A carbohydrate‐binding module 64 of Spirochaeta thermophila
下载免费PDF全文
![点击此处可从《Proteins》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Spirochaeta thermophila secretes seven glycoside hydrolases for plant biomass degradation that carry a carbohydrate‐binding module 64 (CBM64) appended at the C‐terminus. CBM64 adsorbs to various β1‐4‐linked pyranose substrates and shows high affinity for cellulose. We present the first crystal structure of a CBM64 at 1.2 Å resolution, which reveals a jelly‐roll‐like fold corresponding to a surface‐binding type A CBM. Modeling of its interaction with cellulose indicates that CBM64 achieves association with the hydrophobic face of β‐linked pyranose chains via a unique coplanar arrangement of four exposed tryptophan side chains. Proteins 2016; 84:855–858. © 2016 Wiley Periodicals, Inc. 相似文献
20.
Clostridium thermocellum cellodextrin phosphorylase (CtCDP), a single-module protein without an apparent carbohydrate-binding module, has reported activities on soluble cellodextrin
with a degree of polymerization (DP) from two to five. In this study, CtCDP was first discovered to have weak activities on weakly water-soluble celloheptaose and insoluble regenerated amorphous
cellulose (RAC). To enhance its activity on solid cellulosic materials, four cellulose binding modules, e.g., CBM3 (type A)
from C. thermocellum CbhA, CBM4-2 (type B) from Rhodothermus marinus Xyn10A, CBM6 (type B) from Cellvibrio mixtus Cel5B, and CBM9-2 (type C) from Thermotoga maritima Xyn10A, were fused to the C terminus of CtCDP. Fusion of any selected CBM with CtCDP did not influence its kinetic parameters on cellobiose but affected the binding and catalytic properties on celloheptaose
and RAC differently. Among them, addition of CBM9 to CtCDP resulted in a 2.7-fold increase of catalytic efficiency for degrading celloheptaose. CtCDP-CBM9 exhibited enhanced specific activities over 20% on the short-chain RAC (DP = 14) and more than 50% on the long-chain
RAC (DP = 164). The chimeric protein CtCDP-CBM9 would be the first step to construct a cellulose phosphorylase for in vitro hydrogen production from cellulose by
synthetic pathway biotransformation (SyPaB). 相似文献