The use of cyclic voltammetry to detect biofilms formed by Pseudomonas fluorescens on platinum electrodes

The development of an electrochemical detector to monitor the in situ formation of biofilms is described. The detector consisted of an electrochemical cell containing three electrodes, whose response to the application of a potential profile to the working electrode was sensitive to the amount of biofilm present on the surface. The electrochemical technique used was repetitive cyclic voltammetry. Differences between the response of the uncolonised electrode and after Pseudomonas fluorescens biofilms of different ages were grown on its surface were determined. The results show that cyclic voltammetry applied to platinum electrodes can be used to detect young biofilms. The development of the shape of the voltammogram as the potential is cycled may constitute a means of providing information on the coverage of the surface. Observation of the platinum electrodes before and after the electrochemical measurements showed that even after 30 min of recycling, most of the cells were still adhered to the surface, although some may have lost viability.     

Effect of different concentrations of ortho-phthalaldehyde on biofilms formed by Pseudomonas fluorescens under different flow conditions

The effectiveness of different concentrations of ortho-phthalaldehyde (OPA) in controlling biofilms of Pseudomonas fluorescens formed on stainless steel slides, using flow cell reactors under laminar and turbulent flow, was investigated by determining the variation in mass and respiratory activity. The physical stability of the biofilm with and without exposure to OPA was studied in a rotating device as variation in the mass of the biofilm on the surface after exposure to different rotation velocities. The activity of OPA against bacterial suspended cultures was evaluated in the presence and absence of bovine serum albumin (BSA) in order to evaluate the interference of proteins on the activity of the biocide. The results showed that biofilms formed under different flow conditions had different properties and reacted differently after biocide application. Biofilms formed under laminar flow were more easily inactivated than those formed under turbulent conditions. However, OPA did not promote the detachment of biofilms from the surface. The exposure of biofilms to different shear stress conditions after OPA treatment enhanced removal from the surface, indicating that OPA may weaken the biofilm matrix. The biocide was more effective on suspended cells than on cells grown in biofilms. This fact may be explained by the reaction of the biocide with proteins of the polymeric matrix of the biofilm as suggested by the significant reduction of biocide action on suspended cells in the presence of BSA.     

Characterization of biofilm-like structures formed by Pseudomonas aeruginosa in a synthetic mucus medium

ABSTRACT: BACKGROUND: The accumulation of thick stagnant mucus provides a suitable environment for the growth of Pseudomonas aeruginosa and Staphylococcus aureus within the lung alveoli of cystic fibrosis (CF) patients. These infections cause significant lung damage, leading to respiratory failure and death. In an artificial mucin containing medium ASM+, P. aeruginosa forms structures that resemble typical biofilms but are not attached to any surface. We refer to these structures as biofilm like structures (BLS). Using ASM+ in a static microtiter plate culture system, we examined the roles of mucin, extracellular DNA, environmental oxygen (EO2), and quorum sensing (QS) in the development of biofilm-like structures (BLS) by P. aeruginosa; and the effect of EO2 and P. aeruginosa on S. aureus BLS. RESULTS: Under 20% EO2, P. aeruginosa strain PAO1 produced BLS that resemble typical biofilms but are confined to the ASM+ and not attached to the surface. Levels of mucin and extracellular DNA within the ASM+ were optimized to produce robust well developed BLS. At 10% EO2, PAO1 produced thicker, more developed BLS, while under 0% EO2, BLS production was diminished. In contrast, the S. aureus strain AH133 produced well-developed BLS only under 20% EO2. In PAO1, loss of the QS system genes rhlI and rhlR affected the formation of BLS in ASM+ in terms of both structure and architecture. Whether co-inoculated into ASM+ with AH133, or added to established AH133 BLS, PAO1 eliminated AH133 within 48--56 h. CONCLUSIONS: The thick, viscous ASM+, which contains mucin and extracellular DNA levels similar to those found in the CF lung, supports the formation of biofilm-like structures similar to the aggregates described within CF airways. Alterations in environmental conditions or in the QS genes of P. aeruginosa, as occurs naturally during the progression of CF lung infection, affect the architecture and quantitative structural features of these BLS. Thus, ASM+ provides an in vitro medium in which the effect of changing levels of substances produced by the host and the bacteria can be analyzed to determine the effect on such structures and on the susceptibility of the bacteria within the BLS to various treatments.     

Characterization of a Protease from a Psychrotroph, Pseudomonas fluorescens 114

A psychrotrophic bacterium isolated from river sediment was identified as Pseudomonas fluorescens 114. It grew at 0°C and optimally at 20°C. The bacterium produced a protease with a molecular weight of 47,000, which was stable in the pH range of 5 to 9 and worked optimally between pH 6.5 and 10. Activity was optimal at 35°C and was lost immediately at 50°C and after 5 min at 45°C. At 0, 10, and 20°C, 24, 38, and 57% of optimal activity were observed, respectively.     

Characterization of biofilm formed by multidrug resistant Pseudomonas aeruginosa DC-17 isolated from dental caries

The present work reports with the screening of biofilm-producing bacteria from the dental caries. The dental pathogens showed resistance against various antibiotics and biofilm forming ability at various levels. Among the bacterial strain, Pseudomonas aeruginosa DC-17 showed enhanced biofilm production. Extracellular polymeric substance (EPS) was synthesized by the selected bacterial isolate considerably and contributed as the major component of biofilm. EPS composed of eDNA, proteins and lipids. The total protein content of the EPS was found to be 1.928 mg/mL and was the major component than carbohydrate and DNA. Carbohydrate content was 162.3 mg/L and DNA content of EPS was 4.95 μg/mL. These macromolecules interacted in the matrix to develop dynamic and specific interactions to signalling biofilm to differentiating various environments. Also, the isolated bacteria showed resistant against various commercially available antibiotics. The isolates showed more resistance against penicillin (98%) and were sensitive against amoxicillin. Among the factors, temperature, pH and sugar concentration influenced biofilm formation. Biofilm forming ability of the selected bacterial stain was tested at various pH values and alkaline pH was favoured for biofilm production. Biofilm production was found to be maximum at 40 °C and 8% sucrose enhanced biofilm formation. Biofilm formed by P. aeruginosa DC-17 was resistant against various tested antimicrobials and chemicals.     

Integration and decontamination of Bacillus cereus in Pseudomonas fluorescens biofilms

Aims:  The hypothesis that surrogate planktonic pathogens ( Bacillus cereus and polystyrene microspheres) could be integrated in biofilms and protected from decontamination was tested.
Methods and Results:  Pseudomonas fluorescens biofilms were grown on polyvinyl chloride coupons in annular reactors under low nutrient conditions. After biofilm growth, B. cereus spores and polystyrene microspheres (an abiotic control) were introduced separately. Shear stress at the biofilm surface was varied between 0·15 and 1·5 N m⁻². The amount of surrogate pathogens introduced ranged from approximately 10⁵ CFU ml⁻¹ to 10¹⁰ spheres ml⁻¹. The quantity of surrogate pathogens integrated in the biofilm was proportional to the amount introduced. In 14 of the 16 cases, 0·4–3·0% of the spores or spheres introduced were measured in the biofilms. The other two cases had 10% and 21% of the spores detected. Data suggested that the spores germinated in the system. The amount of surrogate pathogens detected in the biofilms was higher in the mid-shear range. Chlorine treatment reduced the quantity of both surrogate pathogens and biofilm organisms. In one experiment, the biofilms and B. cereus recovered when the chlorine treatment was terminated.
Conclusions:  Planktonic surrogate pathogens can be integrated in biofilms and protected from chlorination decontamination.
Significance and Impact of the Study:  This knowledge assists in understanding the impact of biofilms on harbouring potential pathogens in drinking-water systems and protecting the pathogens from decontamination.     

Degradation of diarylethane structures by Pseudomonas fluorescens biovar I

Pseudomonas fluorescens biovar I was isolated from a pulp mill effluent based on its ability to grow on synthetic media containing 1,2-diarylethane structures as the sole carbon and energy source. Analysis of samples taken from cultures of this strain in benzoin or 4,4-dimethoxybenzoin (anisoin), showed that cleavage between the two aliphatic carbons takes place prior to ring fission. Intermonomeric cleavage was also obtained with crude extracts. Substrates of this reaction were only those 1,2-diarylethane compounds that supported growth of the bacterium. The purification and partial characterization of an enzyme that catalyzes the NADH-dependent reduction of the carbonyl group of benzoin and anisoin is also reported.     

Characterization of hydantoinase from Pseudomonas fluorescens strain DSM 84

The hydantoinase (EC 3.5.2.2) from Pseudomonas fluorescens strain DSM 84 was purified either by hydrophobic interaction chromatography on phenyl-Sepharose or by salting out chromatography on Sepharose 4B, gel filtration on Sephacryl S-400, and preparative electrophoresis. Molecular weight values of 230,000 and 60,000 for the native enzyme and each of the four subunits were estimated for the hydantoin hydrolysing activity. The hydantoinase was stable at temperatures up to 40 degrees C but showed an optimal activity at 55 degrees C. The enzyme was markedly inhibited by copper, para-hydroxymercuribenzoate, 8-hydroxyquinoline, and 2,2'-dipyridyl but not by zinc, and poorly by EDTA and o-phenanthroline. The hydantoin-hydrolyzing activity could be reactivated by ferrous ions. Dihydrouracil was the most readily hydrolyzed substrate. The dihydropyrimidinase produced by strain DSM 84 could also hydrolyze 5-substituted hydantions such as isopropylhydantoin (valine derivative) continuously for 10 days in a membrane reactor at a conversion rate of 30%. The only identified end product was N-carbamyl-D-valine.     

Sodium dodecyl sulfate allows the persistence and recovery of biofilms of Pseudomonas fluorescens formed under different hydrodynamic conditions

The effect of the anionic surfactant sodium dodecyl sulfate (SDS) on Pseudomonas fluorescens biofilms was investigated using flow cell reactors with stainless steel substrata, under turbulent (Re = 5200) and laminar (Re = 2000) flow. Steady-state biofilms were exposed to SDS in single doses (0.5, 1, 3 and 7 mM) and biofilm respiratory activity and mass measured at 0, 3, 7 and 12 h after the SDS application. The effect of SDS on biofilm mechanical stability was assessed using a rotating bioreactor. Whilst high concentrations (7 mM) of SDS promoted significant biofilm inactivation, it did not significantly reduce biofouling. Turbulent and laminar flow-generated biofilms had comparable susceptibility to SDS application. Following SDS exposure, biofilms rapidly recovered over the following 12 h, achieving higher respiratory activity values than before treatment. This phenomenon of post-treatment recovery was more pronounced for turbulent flow-generated biofilms, with an increase in SDS concentration. The mechanical stability of the biofilms increased with surfactant application, except for SDS concentrations near the critical micellar concentration, as measured by biofilm removal due to an increase in external shear stress forces. The data suggest that although SDS exerts antimicrobial action against P. fluorescens biofilms, even if only partial and reversible, it had only limited antifouling efficacy, increasing biofilm mechanical stability at low concentrations and allowing significant and rapid recovery of turbulent flow-generated biofilms.     

The structure of Pseudomonas fluorescens biofilms in contact with flowing systems

Using a specially designed flow system Pseudomonas fluorescens has been grown on the inside of glass tubes under carefully controlled conditions. Results show that films developed from water flowing at 0–5 m.s^‐1 are less compact and thicker than with a water velocity of 2–5 m.s^‐1. In the latter all the cells are aligned in the direction of flow whereas in the former the individual cells directly attached to the surface, are randomly distributed with groups of cells lying parallel to the tube axis.     

Survival ofalginate-ecapsulated Pseudomonas fluorescens cells in soil

Alginate-encapsulated and unencapsulated cells of Pseudomonas fluorescens Rsf were introduced into soil microcosms with and without wheat plants to evaluate bacterial survival and colonization of the rhizoplane and rhizosphere. Encapsualtion of cells in alginate amended with skim milk or with skim milk plus bentonite clay significantly enchanced long-term survival of the cells. There was a negligible effect on long-term bacterial survival when cells were encapsulated in alginate amended with TY medium or soil extract, as compared to water. Drying of beads resulted in a significant reduction in bacterial viability. After addition to soil, cells in dried beads increased in numbers and exhibited stable population densities, whereas cells added in moist beads showed stable dynamics at a higher level. Cells encapsulated in dried beads or fresh beads survived better than unencapsulated cells added to soil. Both cells in moist and dried alginate beads also survide a dry/wet cycle in soil, whereas unencapsulated cells were sensitive to these moisture fluctuations. Shortly after inoculation and 63 days after this, cells from moist beads colonized wheat roots at significantly higher levels than unencapsulated cells, whereas cells in dried beads did so at levels similat to unencapsulated cells. Cells in beads initially placed at different distance from developing root mat were able to move towards and colonize the rhizosphere, at levels of roughly 10⁴ to 10⁶ colony-forming units fo P. fluorescens R2f per gram of dry soil. Correspondence to: J. T. Trevors or J. D. van Elsas     

Polysaccharides serve as scaffold of biofilms formed by mucoid Pseudomonas aeruginosa

Chronic lung infection by mucoid Pseudomonas aeruginosa is one of the major pathologic features in patients with cystic fibrosis. Mucoid P.?aeruginosa is notorious for its biofilm forming capability and resistance to immune attacks. In this study, the roles of extracellular polymeric substances from biofilms formed by mucoid P.?aeruginosa were investigated. Alginate is not an essential structure component for mucoid P.?aeruginosa biofilms. Genetic studies revealed that Pel and Psl polysaccharides serve as essential scaffold and mediate macrocolony formation in mucoid P.?aeruginosa biofilms. The Psl polysaccharide is more important than Pel polysaccharide in mucoid P.?aeruginosa biofilm structure maintenance and phagocytosis resistance. The polysaccharides were further found to protect mucoid P.?aeruginosa strain from host immune clearance in a mouse model of acute lung infection.     

Biodegradation of didecyldimethylammonium chloride by Pseudomonas fluorescens TN4 isolated from activated sludge

Bacteria that degrade didecyldimethylammonium chloride (DDAC) were isolated from activated sludge from a municipal sewage treatment plant by enrichment culture with DDAC as a sole carbon source. One of the isolates, Pseudomonas fluorescens TN4, degraded DDAC to produce decyldimethylamine and subsequently, dimethylamine, as the intermediates. The TN4 strain also assimilated the other quaternary ammonium compounds (QACs), alkyltrimethyl- and alkylbenzyldimethyl-ammonium salts, but not alkylpyridinium salts. TN4 was highly resistant to these QACs and degraded them by an N-dealkylation process. These data mean that there are some QAC-resistant and QAC-degrading bacteria such as TN4 in the environment.     

The impact of culture medium on the development and physiology of biofilms of Pseudomonas fluorescens formed on polyurethane paint

Microbial biofilms cause the deterioration of polymeric coatings such as polyurethanes (PUs). In many cases, microbes have been shown to use the PU as a nutrient source. The interaction between biofilms and nutritive substrata is complex, since both the medium and the substratum can provide nutrients that affect biofilm formation and biodeterioration. Historically, studies of PU biodeterioration have monitored the planktonic cells in the medium surrounding the material, not the biofilm. This study monitored planktonic and biofilm cell counts, and biofilm morphology, in long-term growth experiments conducted with Pseudomonas fluorescens under different nutrient conditions. Nutrients affected planktonic and biofilm cell numbers differently, and neither was representative of the system as a whole. Microscopic examination of the biofilm revealed the presence of intracellular storage granules in biofilms grown in M9 but not yeast extract salts medium. These granules are indicative of nutrient limitation and/or entry into stationary phase, which may impact the biodegradative capability of the biofilm.     

Survival of parental and genetically modified derivatives of a soil isolated Pseudomonas fluorescens under nutrient-limiting conditions

Wild type, a rifampicin-resistant mutant and three genetically modified derivatives of the soil isolate Pseudomonas fluorescens R2f were starved in pure cultures for periods of up to 70 d. Cells were starved after harvesting at a point early in the stationary phase of the growth curve and all five strains demonstrated the ability to survive nutrient deprivation and resuscitate rapidly when growth nutrients became available. No difference in total counts and metabolic activity was detected between the strains. Plate counts were similar for all strains up to day 35. Wild type and the rifampicin-resistant mutant strain showed greater recovery than the genetically modified strains on day 70. During the starvation period there was a significant decrease in cell lengths of all five strains, however, there was no significant difference between the strains. The shape of the starved cells varied with the growth phase at which they had been harvested. Cells taken from early stationary phase and starved produced predominantly rod-shaped cells whereas those taken from early log phase and starved produced small round cells. In experiments when the rifampicin-resistant mutant and the genetically modified strain Art-3 were starved at early log phase the cells were significantly smaller than respective cultures not exposed to the nutrient limiting conditions, and there was no significant difference in the response of the two strains. None of the cultures produced ultramicrobacteria, and none of the cultures entered a non-culturable state. Starvation at different cell densities did not affect the recoverability of the cells. The results of this study demonstrate that responses to starvation conditions by the genetically modified and parental strains are similar.     

Pattern differentiation in co-culture biofilms formed by Staphylococcus aureus and Pseudomonas aeruginosa

Biofilm infections may not simply be the result of colonization by one bacterium, but rather the consequence of pathogenic contributions from several bacteria. Interspecies interactions of different organisms in mixed-species biofilms remain largely unexplained, but knowledge of these is very important for understanding of biofilm physiology and the treatment of biofilm-related infectious diseases. Here, we have investigated interactions of two of the major bacterial species of cystic fibrosis lung microbial communities -Pseudomonas aeruginosa and Staphylococcus aureus- when grown in co-culture biofilms. By growing co-culture biofilms of S. aureus with P. aeruginosa mutants in a flow-chamber system and observing them using confocal laser scanning microscopy, we show that wild-type P. aeruginosa PAO1 facilitates S. aureus microcolony formation. In contrast, P. aeruginosa mucA and rpoN mutants do not facilitate S. aureus microcolony formation and tend to outcompete S. aureus in co-culture biofilms. Further investigations reveal that extracellular DNA (eDNA) plays an important role in S. aureus microcolony formation and that P. aeruginosa type IV pili are required for this process, probably through their ability to bind to eDNA. Furthermore, P. aeruginosa is able to protect S. aureus against Dictyostelium discoideum phagocytosis in co-culture biofilms.     

Studies on the behaviour of Pseudomonas fluorescens biofilms after Ortho-phthalaldehyde treatment

A relatively novel biocide, ortho-phthalaldehyde (OPA), was tested to control biofilms formed by Pseudomonas fluorescens on stainless steel surfaces. The toxic action of OPA was assessed in terms of inactivation and removal of the biofilm by means of, respectively, the determination of the respiratory activity and the variation in the dry weight of the biofilms. For comparison, the activity of OPA against suspended bacteria was also evaluated. The results showed that higher concentrations of OPA and longer exposure times are needed to inactivate P. fluorescens biofilms than planktonic populations, thus denoting that sessile bacteria have a reduced susceptibility to OPA. This appears to be associated with the reaction with the proteins of the matrix, as demonstrated by the reduction of the antimicrobial action of OPA in the presence of a protein (bovine serum albumin). The application of OPA appeared to cause little effect in the removal of biofilms from the metal slides since the mass of biofilm that remained on the surfaces, after biocide treatment, was within the same range as those observed in the control tests. These results suggest that, with OPA application, biofilms can be inactivated but stay attached to the surfaces, decreasing thereby the success of the chemical treatment.     

Revised structures of the pyoverdins from Pseudomonas putida CFBP 2461 and from Pseudomonas fluorescens CFBP 2392

Several suggestions for structures of the siderophores (pyoverdins) from Pseudomonas spp. can be found in the literature which are based on a FAB mass spectrometric analysis only. Availability of two original strains of two Pseudomonas spp. allowed to re-investigate the structure of their pyoverdins. In both cases the amino acid sequence had to be corrected. In addition, d- and l-amino acids could be identified and located in the peptide chain. The knowledge of the correct structures is important in view of an ongoing study to establish relationships between the nature of the peptide chains of pyoverdins and their recognition by outer membrane proteins.     

Characterization of a Heat-Stable Protease of Pseudomonas fluorescens P26

A heat-stable, extracellular proteolytic enzyme was isolated from Pseudomonas fluorescens P26. Brain heart infusion broth (Fisher Scientific Co.), pH 7.5, and incubation at 21 C provided the optimal conditions for bacterial growth for enzyme production. The organism had a D value of 2.6 min at 62.8 C (145 F). The enzyme, however, was quite heat-stable, requiring 15 hr at 62.8 C, 8 hr at 71.4 C, and 9 min at 121 C for complete inactivation. Milk, whey, and casein each had a protective effect on the enzyme against heat inactivation. Purification was accomplished by growth of organisms in broth, centrifugation, sterilization by filtration, ammonium sulfate precipitation (55% saturation), dialysis (against six changes of water), and protein separation by passage through a Sephadex G-100 column. Ultracentrifugation revealed a single band with a sedimentation coefficient of 1.51 which suggested a molecular weight of approximately 23,000. As little as 0.2 unit of the purified enzyme caused detectable flavor defects during 30 days of storage at 4 C, and the Hull test for liberation of tyrosine compared favorably in sensitivity with the sensory method in milk.