Adaptation of the Millon, Sudan Black B, and Periodic Acid-Schiff Technics for Block Staining of Insect Tissues

Spermatophores and reproductive systems of the beetle, Lytta nuttalli Say, fixed in Bouin's aqueous picroformol or buffered 10% neutral formol were stained in toto by the Millon, Sudan black B and periodic acid-Schiff reactions as follows. Millon: after excess fixative is removed in 70% ethanol, specimens are brought to water, stained in Millon's reagent at 60 C for 1 hr, rinsed in 2% aqueous nitric acid at 40-50 C, dehydrated rapidly, cleared, embedded and sectioned as usual. Sudan black B: specimens are taken to absolute ethanol, stained in a saturated solution of Sudan black B in absolute ethanol at room temperature for 24-48 hr, rinsed and cleared in xylene, embedded and sectioned. PAS: specimens are brought to water, oxidized in 0.5 aqueous HIO₄ at 37 C for 30 min, washed in 2 changes of water, stained in Schiif reagent at room temperature for 1 hr, rinsed in 3 changes of 0.5% aqueous potassium metabisulfite, washed in running water for 10-15 min, dehydrated, cleared, embedded and sectioned. All 3 methods produced their characteristic staining in specimens up to 3 mm thick     

The Histochemical Detection of Thallium

Thallium can be histochemically localized in formalin-fixed, paraffin-processed tissues by treating sections, after passing them to water through xylene and graded alcohols, in a 0.5% aqueous Bi(NO₃)₃ solution acidified with 1 drop of concentrated HNO₃ per 100 ml. Sections are then washed and placed for 5 min in 2% aqueous KI, again washed, routinely dehydrated, cleared and covered. If desired, they may be lightly counterstained prior to dehydration. The tissue sites of T1 will be demonstrated by the fine wine-red crystals of (T1I)₂-BiI₃ resulting from the reaction, and will appear black with the usual microscopic illumination.     

A Protargol Method for Staining Nerve Fibers in Frozen or Celloidin Sections

Extensive experimentation with protargol staining of neurons in celloidin and frozen sections of organs has resulted in the following technic: Fix tissue in 10% aqueous formalin. Cut celloidin sections IS to 25 μ, frozen sections 25 to 40 μ. Place sections for 24 hours in 50% alcohol to which 1% by volume of NH₄OH has been added. Transfer the sections directly into a 1% aqueous solution of protargol, containing 0.2 to 0.3 g. of electrolytic copper foil which has been coated with a 0.5% solution of celloidin, and allow to stand for 6 to 8 hours at 37° C. Caution: In this and the succeeding step the sections must not be allowed to come in contact with the copper. From aqueous protargol, place the sections for 24 to 48 hours at 37° C. directly into a pyridinated solution of alcoholic protargol (1.0% aqueous solution protargol, 50 ml.; 95% alcohol, 50 ml.; pyridine, 0.5 to 2.0 ml.), containing 0.2 to 0.3 g. of coated copper. Rinse briefly in 50% alcohol and reduce 10 min. in an alkaline hydroquinone reducer (H₃BO₃, 1.4 g.; Na₂SO₃, anhydrous, 2.0 g.; hydroquinone, 0.3 g.; distilled water, 85 cc; acetone, 15 ml.). Wash thoroly in water and tone for 10 min. in 0.2% aqueous gold chloride, acidified with acetic acid. Wash in distilled water and reduce for 1 to 3 min. in 2% aqueous oxalic acid. Quickly rinse in distilled water and treat the sections 3 to 5 min. with 5% aqueous Na₂S₂O₃+5H₂O. Wash in water and stain overnight in Einarson's gallocyanin. Wash thoroly in water and place in 5% aqueous phosphotungstic acid for 30 min. From phosphotungstic acid transfer directly to a dilution (stock solution, 20 ml.; distilled water, 30 ml.) of the following stock staining solution: anilin blue, 0.01 g.; fast green FCF, 0.5 g.; orange G, 2.0 g.; distilled water, 92.0 ml.; glacial acetic acid, 8 ml.) and stain for 1 hour. Differentiate with 70% and 95% alcohol; pass the sections thru butyl alcohol and cedar oil; mount.     

Oxidation of benzyl alcohol by whole cells of Pichia pastoris and by alcohol oxidase in aqueous and nonaqueous reaction media

The low substrate specificity of alcohol oxidase from Pichia pastoris makes this enzyme system of potential biotechnological interest. Whole cells of Pichia pastoris are able to oxidize benzyl alcohol to benzaldehyde in aqueous reaction media. The low water solubility of the reactant and product of this bioconversion, combined with the ability of both to strongly inhibit the reaction, favor the use of nonaqueous reaction fluids. Purified alcohol oxidase was shown to function in a number of 2-phase reaction systems of varied aqueous to organic phase ratios (0.01-0.05 v/v). The apparent V(max) and K(m) were 5.26 g/Lh and 7.41 g/L respectively, for the oxidation of benzyl alcohol to benzaldehyde in hexane containing 3% aqueous phase. The volume of the aqueous phase had a strong effect on the reaction, with an aqueous: organic ratio of 3-5% found to be optimum. The enzyme could be firmly immobilized on DEAE-Biogel (Biorad) to enhance stability and biocatalyst recovery.     

Degradation of aqueous 4-chloroaniline by ozonolysis and combined gamma-rays-ozone processing

The decomposition of 4-chloroaniline (4-ClA), used as a model for water pollutants, was studied by ozonolysis as well as by gamma-rays in the presence of ozone under comparable conditions. The degradation process was followed by absorption spectroscopy and by HPLC-method as well. Depending on the ozone concentration (mg O3/min) introduced into the aqueous solution the substrate is decomposed to a mixture of carboxylic acids, which can be entirely degradated by prolonged treatment. The combined processing of 4-ClA by gamma-irradiation in the presence of ozone proved to lead even to more efficient degradation of the substrate. Some primary reaction steps are briefly discussed.     

Adaptation of Mallory's Trichrome Stain to Embryonic and Fetal Material

Based upon results of an investigation of the role of phosphotungstic acid in connective tissue staining, the Mallory trichrome stain was adapted to sequential application of all three dyes, thus making it usable on embryonic and fetal material. Ten to twelve day postconception mouse fetuses were formalin fixed and paraffin embedded. Staining was as follows: (1) 1% aqueous acid fuchsin for 5 min followed by not more than 30 sec in running tap water; (2) 2% aqueous phosphomolybdic acid (PMA) for 10 min followed by a 2 min running tap water wash; (3) staining in 0.5% aniline blue in 8% acetic acid for 10 min, followed consecutively by 30 sec in running tap water, 2% aqueous PMA for 2 min, and 30 sec in running tap water; (4) 2% orange G in 8% acetic acid for 5 min, and rinsing for 30 sec in running tap water. Dehydration in ethanol, t-butanol, acetone, or by blotting followed by 1:3 terpineol-xylene, clearing in xylene and mounting, completed the procedure. The 30 sec tap water rinses can optionally be replaced by 1-2 min in 8% acetic acid. Sections can be made redder by increasing acid fuchsin staining time, or increasing time in the first PMA; red can be decreased by decreasing staining time, increasing time of the 2 min tap water wash, or decreasing time in the first PMA. Blue or orange staining can be increased or decreased by varying staining times in these solutions. Sharper differentiation may be obtained by increasing the time in PMA.     

Enzymatic Synthesis of N-formyl-L-aspartyl-L-phenylalanine Methyl Ester (Aspartame Precursor) Utilizing an Extractive Reaction in Aqueous/Organic Biphasic Medium

N-Formyl-L-aspartyl-L-phenylalanine methyl ester (N-formyl aspartame, F-AspPheOMe) was synthesized enzymatically utilizing an extractive reaction in an aqueous/organic biphasic system. The N-formyl aspartame yield in a pure aqueous monophasic system was, in general, ca. 3% , however, it was over 80 % in a water/1-butanol biphasic system using a simultaneously extractive operation of an enzymatic reaction in an aqueous phase and a product separation from an aqueous to an organic phases.     

Experimental Cyanine Red: A New Stain for Nucleic Acids and Acid Mucopolysaccharides

A new cationic dye, experimental cyanine red (du Pont), with an absorption maximum of 536 mμ and a pH of 2.9 in 0.5% aqueous solution, is shown to be suitable for staining nucleic acids and tissue materials presumed to contain acid mucopolysaccharides. Mammalian tissues fixed in 10% neutral buffered formalin or Bouin's fluid are dehydrated, embedded in paraffin, sectioned, mounted, deparaffinized, passed through ethanols to water, and stained for 3-30 min in 0.5% experimental cyanine red in water. Differentiation and dehydration in 3 changes (about 1 min each) of n-butanol is followed by clearing in xylene and mounting in resin.     

Basic Dye Counterstaining of Sections Impregnated by the Golgi-Cox Method

Celloidin blocks of Golgi-Cox impregnated material are cut at 50 μ, the sections collected in 70% alcohol, transferred to a 3:1 mixture of absolute alcohol and chloroform for 2 min, and then stored in xylene or toluene for at least 3 min, or up to 2 wk until processed further. Mounting is done on glass slides which have been coated with fresh egg albumen diluted in 0.2% ammonia water (or a 0.5% solution of dry powdered egg albumen) and then dried at 60°C overnight. For attachment to these coated slides, sections are first soaked for 2-3 min in a freshly prepared mixture of methyl benzoate, 50 ml; benzyl alcohol, 200 ml; chloroform, 150 ml; and then transferred quickly to the slides by means of a brush. After 2-3 min the chloroform evaporates and the celloidin softens. The slides are then immersed in toluene which hardens the celloidin and anchors the sections to the slides. Alcohols of descending concentrations to 40% are followed by alkalinizations, first in: absolute alcohol, 40 ml; strong ammonia water 60 ml, for 2 min, then in: absolute alcohol, 70 ml; strong ammonia water, 30 ml, for 1 hr. Excess alkali is then removed by 70% and 40% alcohol, 2 min each, and a 10 min wash in running tap water. Bleaching in 1% Na₂S₂O₃, for 10 min and washing again in tap water for 10 min completes the process preliminary to staining. The preparations are then stained for 90 min in an aqueous solution of either 0.5% cresylecht violet, neutral red, or Darrow red, buffered at pH 3.6. Dehydration and differentiation in ascending grades of alcohol, clearing with toluene or xylene, and applying a cover glass with a mounting medium having a refractive index of about 1.61 completes the process.     

Direct Staining of Reticular Fibers with Gold Chloride

Reticular fibers are selectively stained in paraffin sections of formalin-fixed or Bouin's-fixed tissue as follows: 1% aqueous solution of gold chloride for 20 min, followed by a 10 min immersion in an aqueous solution containing 5% Na₂CO₃ and 0.5% KOH. The sections then are placed in a 5% aqueous solution of KI for 2 min. Counterstaining with a 0.25% aqueous solution of methylene blue chloride is optional. The reticular fibers stain dark pink; the collagen bundles are a light pink to straw color without the counterstain, or a light blue color when the methylene blue is used.     

Aqueous Diaminsilver Hydroxide as a Precursor of Pure Silver Nanoparticles for SERS Probing of Living Erythrocytes

A new effective and simple preparation method of pure metallic hydrosols consisting of silver nanoparticles is proposed using aqueous diaminsilver hydroxide as a precursor freed of special reducing agents, surfactants, or anionic pollutants. The process is driven by NH₃ ligand loss and silver complex dissociation followed by silver ion reduction with hydroxyl ions or ammonia itself present in the solution. Self-reduction of aqueous diaminsilver hydroxide occurs for 20–60 min at 90–100 °C in water and results in a wide range of silver nanoparticles, with their sizes dependent on silver complex concentration and reaction time. The pure silver hydrosol is found to attach to a cell membrane without its damage thus allowing measurements of SERS spectra of submembrane hemoglobin inside living erythrocytes.     

Kinetically controlled synthesis of ampicillin and cephalexin in highly condensed systems in the absence of a liquid aqueous phase

Advantages of performing penicillin G amidase catalysed synthesis of ampicillin and cephalexin by enzymatic acyl transfer to the β-lactam antibiotic nuclei in a highly condensed system using mainly undissolved substrates, with no apparent aqueous liquid phase, were demonstrated. It was shown that synthesis can be performed in the absence of a liquid phase formed by water or an organic co-solvent. This highly condensed system is formed by a liquid phase given by one of the reactant, the phenylglycine methyl ester (PGM), that remains liquid in these operative conditions and the partially dissolved β-lactam nucleus. Operating in such highly condensed system, the water that causes the hydrolysis of PGM is limited to the water hydrating the support on which the enzyme is covalently immobilised. In this way the reaction system is maintained at a controlled degree of hydration.

In the present work the reaction system was modulated by eliminating the solvent (aqueous or aqueous/organic), reducing the amount of water to the minimum for the biocatalytic activity and using PGM as solvent and reagent at the same time. The synthesis was conducted with equimolar amounts of PGM and the β-lactam nucleus, with a reduced hydrolysis of the activated acyl donor. We have also studied a simple and efficient method for the workup of the reaction where the unreacted reagents can be recovered after selective filtration and precipitation.     

Haematoxylin-Phloxine-Alcian Blue-Orange G Differential Staining of Prekeratin, Keratin and Mucin

This is a modification of Kreyberg's stain with Alcian blue 8GS used to stain acid much while phloxine B and orange G stain keratin and prekeratin. Procedure: Dewax formalin-fixed paraffin sections in xylene and hydrate through alcohol. Stain in Mayer's haemalum, 10 min; blue in tap water; wash in distilled water; stain in 1% phloxine, 3 min; wash in running water, 1 min; wash in distilled water; stain in 0.5% aqueous Alcian blue in 0.5 acetic acid, 5 min; wash in distilled water; stain in 0.5% orange G dissolved in 2.0% phosphotungstic acid, 13 min; dehydrate quickly in 2 changes of 95% alcohol and 2 changes of absolute alcohol; clear in several changes of xylene; mount in a synthetic resin. Acid mucopolysaccharides are stained turquois blue; prekeratin and keratin are orange to red orange.     

A Safranin-Fast Green Stain for the Differentiation of the Nuclei of Rumen Protozoa

Mounted, deparaffinized sections of rumen ciliates were hydrolyzed in 1 N HCl for 5 min at 60 C and washed in several changes of distilled water. They were then stained in a mixture of equal volumes of 0.1% aqueous solutions of safranin O and fast green FCF. The sections were washed in 3 changes of distilled water for 2 min each, blotted, dehydrated in 2 changes of absolute alcohol of 1 min each, and mounted from xylene. Several fixatives were employed but only Zenker's gave consistent results. The micronuclei showed a densely stained basophilic “core” surrounded by a peripheral zone of acidophilia, whereas the macronuclei were completely basophilic. Similar results were obtained when RNA was extracted with cold perchloric acid. In conjunction with deoxyribonuclease treatment, the Feulgen reaction indicated that the DNA of the micronucleus is concentrated in the basophilic core while the macronucleus shows a uniform distribution of its chromatin. The safranin-fast green procedure has been used for the structural characterization of rumen protozoa and in studies concerning changes in their nuclear morphology.     

Differential Staining Of Tissue In The Block With Picric Acid And The Feulgen Reaction

The authors have found a modification of the Feulgen reaction to be a satisfactory stain for tissue in the block.

Pieces of fresh mammalian tissue not thicker than 5 mm. are fixed for approximately 48 hours at 25° C. in a mixture of equal parts of 5% aqueous sulfosalicylic acid and saturated aqueous picric acid. They are washed for 30 minutes in three ten-minute changes of distilled water and placed in Feulgen's staining solution diluted to one-half strength with distilled water. The staining solution is allowed to act for 24 hours (2 to 3 mm. thick blocks) up to 48 hours for 5 mm. thickness. After staining, the specimens are transferred to a mixture of sodium bisulfite, 0.5 g. and N hydrochloric acid, 5 ml. in' 100 ml. of distilled water. Two changes of IS to 30 min. each in the acid sulfite are given and these are followed by dehydration through 50%, 70% and 95% alcohol. One to two hours are allowed for each change except the last 95%, in which the stained tissue is allowed to remain overnight. The dehydration is completed in two changes of absolute alcohol with subsequent clearing in xylene and embedding in paraffin. Sections may be cut 10 μ or other thickness desired, mounted on slides, paraffin removed, and covered in the usual manner. Nuclei stain reddish violet against a lemon yellow background when the stain is typical. Orange G, 200 mg. per 100 ml. may be added to the fixing fluid if a more polychromatic effect is desired.     

Selective Staining of Protein and Starch in Wheat Flour and its Products

The main constituents of wheat flour and many wheat flour products are wheat protein (gluten) and starch granules. The specific staining of the protein present was effected by 10 min in 0.1% aqueous ponceau 2R (C.I. No. 16150) acidified with 3—4 drops of 1 N H₂SO₄ per 50 ml of staining solution, followed by rinsing in 2 changes of distilled water, dehydrating, clearing and mounting in a resinous medium in the normal way. Staining of starch was as follows: sections or flour smears were brought to water, treated for 10 min in a protein-blocking reagent (Taninol ADR—Imperial Chemical Industries—used in 1% aqueous solution) rinsed, then stained for 3 mins in 0.5% aqueous chlorazol violet R (C.I. No. 32445) or for 10 min in either 0.5% aqueous chlorazol violet N (C.I. No. 22570), or chlorazol black E (C.I. No. 30235). Staining was followed by thorough rinsing, normal dehydration and clearing and mounting in a medium of R.I. about 1.49 to enhance visibility of unstained starch grains. The methods are applicable to flour smears, cryostat and wax sections.     

The synthesis of amino acids and sugars on an inorganic template from constituents of the prebiotic atmosphere

Inelastic Electron Tunnelling Spectroscopy (IETS) has been used to identify the reaction products present on an alumina surface when it is exposed to likely components of the earth's prebiotic atmosphere. The alumina barrier of Al-AlO _x -Pb tunnelling junctions have been exposed to water; aqueous ammonia; wet carbon monoxide gas and to aqueous formaldehyde vapour under normal atmospheric conditions at room temperature. The water spectrum shows strong coincidence with that of a genuine sample of formic acid. It is proposed that atmospheric CO₂ is involved in this surface catalyzed reaction. The aqueous ammonia spectrum is assigned as an amino acid species produced from ammonia, water and atmospheric carbon dioxide. This spectrum compares very closely with the tunnelling spectrum of a genuine sample of glycine. The wet carbon monoxide spectrum and the aqueous formaldehyde spectrum have been produced by an infusion doping process. These spectra of CO and aqueous formaldehyde are assigned as a sugar like polymer or a sugar formed on the alumina surface. A tunnelling spectrum of D(–) fructose has been produced to aid this assignment. The role of an inorganic template such as alumina in the original prebiotic synthesis of amino acids and sugars is considered.     

Interfacial versus homogeneous enzymatic cleavage of mandelonitrile by hydroxynitrile lyase in a biphasic system

The question of an interfacial versus a homogeneous reaction is carefully addressed for the enzymatic biphasic cleavage of mandelonitrile to benzaldehyde by Prunus amygdalus hydroxynitrile lyase (pa-Hnl) (Hickel et al. [1999] Biotechnol Bioeng 36:425-436). Experimental evidence, including 1) the reaction ceases when the interface is populated by previously adsorbed denatured pa-Hnl, 2) the reaction continues even after washout of the bulk enzyme from the aqueous phase, 3) highly nonpolar organic solvents initially promote fast reaction kinetics that relatively quickly decay to zero product production, and 4) the reaction rate is nonlinear in the bulk enzyme concentration, provide robust grounds for an interfacial reaction. We also model enzymatic mandelonitrile cleavage assuming a homogeneous aqueous-phase reaction. The homogeneous reaction scheme does not simultaneously account for the experimental observations of a linear dependence of the reaction rate on organic/water interfacial area, no dependence on the aqueous-phase volume, and a nonlinear dependence on pa-Hnl aqueous concentration. Further, simple calculations demonstrate that the homogeneous reaction rate is at least three orders of magnitude slower than those observed by Hickel et al. (1999). We again conclude that enzyme adsorbed at the organic solvent/water interface primarily catalyzes the biphasic mandelonitrile cleavage reaction.     

Staining Procedures for Ultrathin Sections of Tissues Embedded in Polyester Resin

Tissues were fixed for 30 min In cold (0-2° C) 1% OsO₄ (Palade) buffered at pH 7.7, to which 0.1% MgCl₂ was added. Dehydration was in a graded ethanol series (containing 0.5% MgCl₂) at 0-2° C, and terminated with 2 changes of absolute ethanol. Tissues were then transferred by a graded series to anhydrous acetone. Infiltration of the tissue with Vestopal-W (a polyester resin), is gradual with the aid of graded solutions of Vestopal-W in acetone. The infiltrated tissue is encapsulated and initial polymerization is done under ultraviolet light at room temperature for 8-16 hr. This is followed by final hardening at 60° C for 36-48 hr. Sections (0.2-1 μ) were cut, dried on slides, placed in acetone for 1 min and then treated by either of the following staining procedures: (1) Thionin-azure-fuchsin staining: Flood the preparation with 0.2% aqueous thionin and heat to 60-80° C for 3 min; if the preparation begins to dry, add stain. Rinse in distilled water. Flood the slide with 0.2% azure B in phosphate buffer at pH 9. Heat to 60-80° C for 3 min; do not permit the preparation to dry. Rinse in distilled water. Dip the slide in MacCallum's variant of Goodpasture's carbol-fuchsin stain for 1-2 sec. Rinse in distilled water. Check the preparation microscopically for intensity of the fuchsin stain. Repeat dips as may be needed to obtain the desired intensity. Rinse in distilled water. Dehydrate quickly in 95% and absolute alcohol; clear in 2 changes of xylene and cover in Permount or similar synthetic resin. (2) Thionin-azure counterstain for the periodic acid-Schiff reaction: Oxidize the tissue in 0.5% periodic acid for 15 min and transfer to Schiff's leucofuchsin solution for 30 min. Counterstain with 0.5% aqueous thionin for 3 min; wash in distilled water; stain in 0.2% azure B in phosphate buffer at pH 5.5; wash in distilled water; dehydrate; clear and cover as in the first method. For temporary preparations let dry after absolute alcohol and apply a drop of immersion oil directly on the section.     

Staining Paraffin Sections with Protargol 6. Impregnation and Differentiation of Nerve Fibers in Adrenal Glands of Mammals

A series of experiments with protargol staining of nerve fibers in mammalian adrenal glands has yielded the following procedure: Fix-1-2 days in a mixture of formamide (Eastman Kodak Company) 10 cc, chloral hydrate 5 g., and 50% ethyl alcohol 90 cc. Wash, dehydrate and embed in paraffin. Cut sections about 15 and mount on slides. Remove the paraffin and run down to distilled water. Mordant 1-2 days in a 1% aqueous solution of thallous (or lead) nitrate at 56-60°C. Wash thru several changes of distilled water and impregnate in 1% aqueous protargol (Winthrop Chemical Company) at 37-40°C. for 1 to 2 days. Rinse quickly in distilled water and differentiate 7-15 seconds in a 0.1% aqueous solution of oxalic acid. Rinse thru several changes of distilled water for a total time of 0.5 to 1.0 rain. Reduce 3-5 rain, in Bodian's reducer: hydroquinone 1 g., sodium sulfite 5 g., distilled water 100 cc. Wash in running water 3-5 min. and tone 5-10 min. in a 0.2% gold chloride solution. Wash 0.5 min. or more and reduce in a 2% oxalic acid solution to which has been added strong formalin, 1 cc. per 100. (Caution. This last reduction is critical and over-reduction can spoil an otherwise good stain; 15-30 seconds usually suffices, and the sections should show only the beginning of darkening to a purplish or gray color.) Wash, fix in hypo, wash, dehydrate and cover.