1-(t-Butyldimethylsilyloxy) benzotriazole (TBDMS-OBt): A new and novel reagent for the synthesis of peptides

Synthesis and use of 1-(t-butyldimethylsilyloxy)benzotriazole (TBDMS-OBt) in the coupling of Fmoc-amino acid chlorides to amino free amino acid esters in homogeneous solution phase is described. The coupling required no addition of base and was fast and racemization free. Work up and isolation of products were easy. Yield, purity and ¹H NMR analysis of peptides, synthesised by this method, were satisfactory.     

1-(t-Butyldimethylsilyloxy) benzotriazole (TBDMS-OBt): A new and novel reagent for the synthesis of peptides

Summary Synthesis and use of 1-(t-butyldimethylsilyloxy)benzotriazole (TBDMS-OBt) in the coupling of Fmoc-amino acid chlorides to amino free amino acid esters in homogeneous solution phase is described. The coupling required no addition of base and was fast and racemization free. Work up and isolation of products were easy. Yield, purity and¹H NMR analysis of peptides, synthesised by this method, were satisfactory.     

Unexpected racemization of proline or hydroxy-proline phenacyl ester during coupling reactions with Boc-amino acids.

When L-proline or O-benzyl-trans-4-hydroxy-L-proline phenacyl ester was coupled with Boc-amino acids in dimethylformamide using water-soluble carbodiimide (WSCI) in the presence of anhydrous 1-hydroxybenzotriazole (HOBt) as coupling reagents, extensive racemization was observed at the C alpha of the proline or hydroxy-proline residue. The extent of racemization was measured by HPLC after the coupling with Boc-L-Leu-OH in the presence or absence of HOBt. The extent of racemization increased when HOBt was added to the reaction mixture, but greatly decreased when it was not, indicating that HOBt was needed for inducing racemization. Almost no racemization was observed when the coupling reaction was carried out by the mixed anhydride procedure in tetrahydrofuran or by the carbodiimide method in dichloromethane without using HOBt. In the case of coupling reactions with ordinary L-amino acid phenacyl esters, no racemization was observed. Examination of some model systems yielded sufficient evidence to prove that HOBt is an efficient catalyst for racemizing proline or hydroxy-proline phenacyl ester not only in the stage of cyclic intermediate formation but also in the opening of the ring structure. Thus, the racemization reaction was found to be closely related to the formation of the cyclic carbinol-amine derivative.     

Simultaneous use of 1-hydroxybenzotriazole and copper(II) chloride as additives for racemization-free and efficient peptide synthesis by the carbodiimide method.

In the carbodiimide mediated coupling of Z-Gly-L-Val-OH with H-L-Val-OMe in DMF, the simultaneous use of HOBt and copper(II) chloride as additives was found to give the desired peptide in a high yield without racemization. In the presence of HOBt, reducing the amount of copper(II) chloride produced a higher yield. Besides improving the coupling efficiency as compared with the case using copper(II) chloride alone as an additive, the present procedure offered another advantage for racemization suppression. Thus, even for the couplings where a low level of racemization was observed in the presence of copper(II) chloride, the simultaneous addition of HOBt and copper(II) chloride resulted in the elimination of racemization. The effectiveness of this new procedure using the two carbodiimide additives in the synthesis of biologically active peptides was assessed by the preparation of a protected Leu-enkephalin. In the 4 + 1 segment condensation using HOBt and copper(II) chloride simultaneously as additives, no racemization was detected and the yield was high enough. The elimination of racemization and improvement of coupling efficiency produced by the present procedure can be attributable to a reduced tendency for the activated forms of the carboxyl component to form a 5(4H)-oxazolone by the action of HOBt, and to the prevention of racemization by copper(II) chloride of the small amount of the oxazolone formed which is not eliminated by the action of HOBt alone.     

BOP reagent for the coupling of pGlu and Boc-His(Tos) in solid phase peptide synthesis

The model peptide TRH was successfully synthesized using benzotriazol-1-yl-oxy-tris(dimethylamino)phosphonium hexafluorophosphate (BOP reagent). The coupling reactions were carried out in N,N-dimethylformamide or N-methylpyrrolidone. These solvents allowed the incorporation of the N-terminal pyroglutamic acid residue into the peptide chain, without using the derivative bearing the N-benzyloxycarbonyl group, which acts as a solubility promoter. A comparative racemization study showed that Boc-His(Tos) can be coupled by means of BOP reagent with less racemization than with DCC when the amount of diisopropylethylamine (DIEA) is kept minimal (same ratio of equivalents as for Boc-His(Tos), i.e. 3 equiv.). However, with the use of a larger amount of DIEA in the coupling mixture (9 equiv.), approximately 3% of epimer was found in the crude product. Our study showed that even under low DIEA conditions, the rate of coupling of the residues with BOP remained comparable to that observed with DCC.     

(1H-benzotriazol-1-yloxy)-N,N-dimethylmethaniminium hexachloroantimonate (BOMI), a novel coupling reagent for solution and solid-phase peptide synthesis.

A HOBt-based immonium-type compound,(1H-benzotriazol-1-yloxy)-N,N-dimethyl methaniminium hexachloroantimonate (BOMI), was synthesized and successfully applied to the synthesis of various oligopeptides with good yields. The estimation of racemization and the influence of several reaction parameters such as solvents, bases and temperature were studied by HPLC using a model reaction. It was found that the reactivity of BOMI was much higher than that of HOBt-based phosphonium- and uronium-type coupling reagents. Moreover, its racemization was lower than that of other HOBt-derived coupling reagents. The effectiveness of BOMI was also demonstrated by the synthesis of Leu-enkephalin both in solution and in the solid-phase.     

Effect of copper(II) chloride on suppression of racemization in peptide synthesis by the carbodiimide method.

Copper(II) chloride was found to be an extremely efficient racemization-suppressing additive in the DCC method as compared with the hitherto known ones, by employing the model coupling Z-Gly-L-Val-OH + H-L-Val-OMe in DMF. Although some other copper salts also had a profound effect, copper(II) chloride was the best from the viewpoint of both racemization suppression and coupling efficiency. The effectiveness of copper(II) chloride was further confirmed by employing the EDC-mediated couplings of Z-Gly-containing dipeptides with amino acid esters or dipeptide esters, and those of Z-L-Ala (or L-Val)-L-Val-OH with amino acid esters or dipeptide esters. In almost all the cases studied, no detectable amount (less than 0.1%) of epimer was observed by the HPLC analysis in the presence of copper(II) chloride. This was also the case even with an extremely stringent coupling system Z-L-Pro-L-Val-OH + H-L-Pro-OMe. With reference to the mechanism of racemization suppression, it was found that copper(II) chloride has a strong ability to suppress the racemization of the 5(4H)-oxazolone, which may be formed from an activated carboxyl component during the coupling.     

Characteristic chain-end racemization behavior during photolysis of poly(L-lactic acid)

Photolysis of poly(L-lactic acid) (PLLA) has many unclear points, such as the degradation mechanism, kinetics, products, and racemization mechanism. To clarify these features of PLLA photolysis, we examined the relationship between photolysis and racemization. The hexad stereosequential analysis of photodegraded PLLA was investigated to specify the racemized positions within a chain in comparison with hydrolysis and thermal degradation. Results from (13)C NMR spectra of UV-irradiated PLLA samples indicated that the samples have racemized d-lactate units at chain ends. From the comparison of racemization behavior among photolysis, hydrolysis, and thermal degradation, it was confirmed that the preferential racemization behavior of each of these three degradation processes is characteristic and distinct, being identified as chain-end racemization, poor racemization, or internal-unit racemization, respectively. The characteristic chain-end racemization behavior of photolysis was first confirmed in this study.     

Fast and efficient peptide bond formation using bis-[alpha,alpha-bis(trifluoromethyl)-benzyloxy]diphenylsulfur. Part I.

This study towards the development of sulfurane-based coupling agents shows that bis-[alpha,alpha-bis(trifluoromethyl)-benzyloxy]diphenylsulfur (BTBDS) can facilitate rapid amide bond formation between Nalpha-urethane-protected l-amino acids and l-phenylalanine ethyl ester in the absence of an external base. The corresponding dipeptide esters were obtained in excellent yields and with no detectable racemization, as judged by analysis of the formed dipeptides by chiral-phase HPLC. In addition, BTBDS-mediated condensation of benzoyl-l-phenylalanine with l-phenylalanine ethyl ester was also investigated. The results indicate that sulfuranes can be useful for application in racemization-sensitive systems, such as segment condensation.     

Evaluation of acid‐labile S‐protecting groups to prevent Cys racemization in Fmoc solid‐phase peptide synthesis

Phosphonium and uronium salt‐based reagents enable efficient and effective coupling reactions and are indispensable in peptide chemistry, especially in machine‐assisted SPPS. However, after the activating and coupling steps with these reagents in the presence of tertiary amines, Fmoc derivatives of Cys are known to be considerably racemized during their incorporation. To avoid this side reaction, a coupling method mediated by phosphonium/uronium reagents with a weaker base, such as 2,4,6‐trimethylpyridine, than the ordinarily used DIEA or that by carbodiimide has been recommended. However, these methods are appreciably inferior to the standard protocol applied for SPPS, that is, a 1 min preactivation procedure of coupling with phosphonium or uronium reagents/DIEA in DMF, in terms of coupling efficiency, and also the former method cannot reduce racemization of Cys(Trt) to an acceptable level (<1.0%) even when the preactivation procedure is omitted. Here, the 4,4′‐dimethoxydiphenylmethyl and 4‐methoxybenzyloxymethyl groups were demonstrated to be acid‐labile S‐protecting groups that can suppress racemization of Cys to an acceptable level (<1.0%) when the respective Fmoc derivatives are incorporated via the standard SPPS protocol of phosphonium or uronium reagents with the aid of DIEA in DMF. Furthermore, these protecting groups significantly reduced the rate of racemization compared to the Trt group even in the case of microwave‐assisted SPPS performed at a high temperature. © 2013 The Authors. European Peptide Society published by John Wiley & Sons, Ltd.     

Racemization in the Coupling Reaction,Pro-Val+Pro,with the Activated Ester Methods

The degree of racemization in the several activated ester methods of the peptide synthesis was measured in using the critical racemization test, Pro-Val+Pro, with help of gas chromatography. The results were compared with that in the coupling reaction, Leu-Phe+Val, in which no racemization had been reported in the corresponding reaction conditions by F. Weygand et al., when the activated dipeptide esters had been prepared from Z-Leu+Phe-activated esters. The significantly higher racemization was observed in the methods of N-hydroxypiperidine ester and thiophenyl ester, even when the activated dipeptide esters were prepared from Z-Pro+Val-activated esters. On the other hand, almost no racemization was observed in the N-hydroxysuccinimide ester and p-nitrophenyl ester methods. A great extent of the racemization was detected when the activated dipeptide esters were prepared directly from Z-Pro-Val-OH.     

Enantioselective synthesis of (2R, 3S)- and (2S, 3R)-4,4,4-trifluoro-N-Fmoc-O-tert-butyl-threonine and their racemization-free incorporation into oligopeptides via solid-phase synthesis

An efficient method for the enantioselective synthesis of (2R, 3S)- and (2S, 3R)-4,4,4-trifluoro-N-Fmoc-O-tert-butyl-threonine on multigram scales was developed. Absolute configurations of the two stereoisomers were ascertained by X-ray crystallography. Racemization-free coupling conditions for the incorporation of tfT into oligopeptides were then explored. For solution-phase synthesis, tfT racemization was not an issue under conventional coupling conditions. For solid-phase synthesis, the following conditions were identified to achieve racemization-free synthesis: if tfT (3.0 equiv) was not the first amino acid to be linked to the resin (1.0 equiv), the condition is 2.7 equiv DIC/3.0 equiv HOBt as the coupling reagent at 0 degrees C for 20 h; if tfT (3.0 equiv) was the first amino acid to be linked to the resin (1.0 equiv), then 1.0 equiv of CuCl(2) needs to be added to the coupling reagent.     

Studies on sensitivity to racemization of activated residues in couplings of N-benzyloxycarbonyldipeptides.

A series of 24 peptides Z-Gly-Xaa(R)-OH where Xaa = 15 different residues and R = H, NH2, tBu, Bzl, Trt, Mtr, and StBu were coupled with valine benzyl ester in dimethylformamide or dichloromethane at +5 degrees. The accompanying racemization was determined by analysis of the epimeric products by normal phase high-performance liquid chromatography (HPLC) for Xaa(R) = Met, Cys(StBu) and Lys(Z) and by reversed-phase HPLC after removal of benzyl-based protecting groups for Xaa(R) = Ser(tBu), Thr(tBu) and Arg(Mtr). The coupling methods examined included mixed anhydride (MxAn) at -5 degrees, and N,N'-dicyclohexylcarbodiimide (DCC), benzotriazol-1-yl-tris(dimethylamino)phosphonium hexafluorophosphate (BOP) and O-benzotriazol-1-yl-N,N,N',N'-tetramethyluroniumhexafluorophosp hate (HBTU) in the presence of 1-hydroxybenzotriazole (HOBt). Very few couplings gave stereochemically pure products. The order of sensitivity to racemization of residues depended on the method of coupling and the solvent. It varied most when comparing MxAn to HOBt-assisted reactions; it varied moderately when comparing HOBt-assisted reactions. There was less variation in comparing BOP and HBTU reactions that are initiated by the same mechanism. Leu, Nle, Phe, Asn, Lys(Z) and Asp(OBzl) are identified as the residues least sensitive to racemization. DCC-HOBt generally led to less epimerization than the other methods.     

Limiting racemization and aspartimide formation in microwave-enhanced Fmoc solid phase peptide synthesis.

Microwave energy represents an efficient manner to accelerate both the deprotection and coupling reactions in 9-fluorenylmethyloxycarbonyl (Fmoc) solid phase peptide synthesis (SPPS). Typical SPPS side reactions including racemization and aspartimide formation can occur with microwave energy but can easily be controlled by routine use of optimized methods. Cysteine, histidine, and aspartic acid were susceptible to racemization during microwave SPPS of a model 20mer peptide containing all 20 natural amino acids. Lowering the microwave coupling temperature from 80 degrees C to 50 degrees C limited racemization of histidine and cysteine. Additionally, coupling of both histidine and cysteine can be performed conventionally while the rest of the peptide is synthesized using microwave without any deleterious effect, as racemization during the coupling reaction was limited to the activated ester state of the amino acids up to 80 degrees C. Use of the hindered amine, collidine, in the coupling reaction also minimized formation of D-cysteine. Aspartimide formation and subsequent racemization of aspartic acid was reduced by the addition of HOBt to the deprotection solution and/or use of piperazine in place of piperidine.     

Synthesis and application of Fmoc-His(3-Bum)-OH.

This paper presents a reevaluation of the synthesis and properties of Fmoc-His(3-Bum)-OH regarding its application in SPPS with minimal racemization of histidine residues during coupling and esterification reactions. By-product formation during the deprotection of the test peptides could be significantly reduced by scavenging the concomitantly formed HCHO, e.g. with methoxyamine.     

Semisynthesis of linear gramicidins using diphenyl phosphorazidate (DPPA)

Sequential HPLC analysis has been used to optimize a synthetic scheme for the preparation of semisynthetic position 1 analogues of the channel-forming pentadecapeptide, gramicidin A. Diphenyl phosphorazidate (DPPA) was more efficient than dicyclohexylcarbodiimide (DCC) for the coupling of N-formyl amino acids to des(formyl-valyl) gramicidin A. The DPPA coupling proceeds rapidly, and with high yield, at 0 degree. The absence of significant (less than 0.1%) racemization is demonstrated by the lack of electrophysiologically active formyl-L-valine gramicidin A in preparations of formyl-D-valine gramicidin A. This scheme has proved useful for the preparation of microgram to gram amounts of position-1-substituted gramicidin analogues suitable for crystallography and electrophysiology. Details of the techniques for the preparation of these highly purified analogues are discussed.     

Cu(OBt)2 and Cu(OAt)2, copper(II)-based racemization suppressors ready for use in fully automated solid-phase peptide synthesis.

The complexes Cu(OBt)2 and Cu(OAt)2, which are derived from copper(II) and HOBt and HOAt, respectively, are shown to be more effective in suppressing racemization during solid-phase peptide synthesis (SPPS) than are those compounds currently being used for this purpose. These compounds can readily be used in conjunction with the commonly applied coupling reagents in fully automated systems for solid-phase peptide chemistry.     

In situ generation of Fmoc-amino acid chlorides using bis-(trichloromethyl) carbonate and its utilization for difficult couplings in solid-phase peptide synthesis.

This paper reports procedures for the straightforward in situ generation of Fmoc-amino acid chlorides using bis-(trichloromethyl)carbonate (BTC) and their utilization for difficult couplings during solid-phase peptide synthesis. The BTC-mediated coupling of all Fmoc-protected proteinogenic amino acids to a large variety of N-alkylated amino acid-peptidyl-resin was studied. The majority of the couplings proceeded with quantitative conversion and without racemization. The utilization of BTC-mediated coupling for facile solid-phase synthesis of backbone cyclic peptides is presented.     

Racemization studies in peptide synthesis through the separation of protected epimeric peptides by reversed-phase high performance liquid chromatography.

Separation of protected epimeric peptides, Z-Gly-Xaa-Xbb-OMe (where Xaa and Xbb = chiral amino acid residues), by reversed-phase HPLC was utilized for studying racemization in peptide synthesis. Thus, the following factors which might affect the extent of racemization during the coupling by the carbodiimide method were investigated: the combination of amino acid residues to be coupled, coexisting tertiary amine salts, and the relative configuration of the amino acid residues. The following points were revealed: the combination of bulky residues at the coupling site results in extensive racemization in a polar solvent such as DMF, the amine hydrochlorides cause less racemization than the p-toluene-sulfonates in DMF, and the influence of relative configuration differs depending on the solvent and the individuality of the amino components. Furthermore, the racemization-suppressing effect of some additives in the carbodiimide method was reevaluated by employing the same procedure.     

Assessment of new 6-Cl-HOBt based coupling reagents for peptide synthesis. Part 2: Racemization studies

Summary Novel Cl-HOBt based coupling reagents have been evaluated for racemization extent in solid-phase peptide synthesis. The results show that all the coupling protocols based on the use of the novel reagents enable incorporation of the racemization prone residue serine with less than 2% racemization. Moreover, serine racemization obtained is less than 0.5% with protocols where a pre-activation step is avoided.