Optimization Studies on Design and Evaluation of Orodispersible Pediatric Formulation of Indomethacin

In the present study, the aim was to optimize an orodispersible formulation of indomethacin using a combined approach of subliming agent and superdisintegrant. The tablets were made by non-aqueous wet granulation technique with superdisintegrant incorporated both intragranularly and extragranularly. A 2³ factorial design was used to investigate the effects amount of subliming agents namely camphor and ammonium bicarbonate and taste masking and soothening hydrophilic agent mannitol as independent variables and disintegration time and crushing strength as dependent responses. The volatilization time of eight hours at 50°C was optimized by conducting solid-state kinetic studies of optimized formulations. Optimized orodispersible tablets were evaluated for wetting time, water absorption ratio, porosity and in vitro and in vivo disintegration tests. Results show that higher levels of camphor and mannitol and a lower level of ammonium bicarbonate is desirable for orodispersion. Scanning electron microscopy (SEM) revealed the porous surface morphology and kinetic digital images substantiated the orodispersible property. Differential Scanning Calorimetry (DSC) studies exhibited physiochemical compatibility between indomethacin and various excipients used in the tablet formulation. Stability studies carried out as per ICH Q₁ A guidelines suggested the stable formulations for the tested time period of 6 months. The systematic approach of using subliming and disintegrating agents helped in achieving a stable, optimized orodispersible formulation, which could be industrially viable.     

Development and Evaluation of Artemether Taste Masked Rapid Disintegrating Tablets with Improved Dissolution Using Solid Dispersion Technique

The purpose of this research was to mask the intensely bitter taste of artemether (ARM) and to formulate a rapid-disintegrating tablet (RDT) of the taste-masked drug. Taste masking was done by solid dispersion with mono amino glycyrrhyzinate pentahydrate (GLY) by solvent evaporation method. To characterize and formulate taste masked rapid disintegrating tablets (RDTs) of ARM, the 1:1M solid dispersion was selected based on bitterness score. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X-ray powder diffraction (XRPD) were performed to identify the physicochemical interaction between drug and carrier, hence its effect on dissolution. RDTs were evaluated for weight variation, disintegration time, hardness and friability. In vitro drug release studies were performed for RDTs at pH 1.2 and 6.8. Bitterness score was evaluated using mini-column method and compared with gustatory sensation test. FTIR spectroscopy and DSC showed no interaction while XRPD showed amorphization of ARM in GLY solid dispersion. RDTs prepared using solid dispersion, (RDT3), showed faster disintegration (within 28 s) and complete bitter taste masking of ARM. In addition, RDT3 exhibited better dissolution profile at both pH 1.2 and 6.8, than RDTs prepared from pure ARM (RDT5). Taste evaluation of RDTs in human volunteers rated tasteless with a score of 0 to RDT3 and 3 to RDT5. Mini-column revealed that RDT5 showed increase in number of persons who sensed bitterness with increased amount of ARM release while RDT3 sensed no bitterness. Thus, results conclusively demonstrated successful masking of taste and rapid disintegration of the formulated tablets in the oral cavity with improved dissolution.     

Optimization of Budesonide Compression-Coated Tablets for Colonic Delivery

The purpose of this study was to formulate budesonide (BUD) compression-coated tablets for colonic specific delivery. Pectin and guar gum were used as enzyme-dependent polymers. For comparison purposes, both pH- and time-dependent polymers were also tried. In vitro release studies were carried out at different pH (1.2, 6.8, and 7.4). Therapeutic efficacy of the prepared tablets compared to commercially available capsules and enema were evaluated in trinitrobenzenesulfonic acid-induced rabbit colitis model. In pH-dependent polymers, Eudragit (EUD) S100/EUD L100 (1:1) released 45.58% in the target area (colon). For time-dependent polymers, decreasing cellulose acetate butyrate (CAB) ratio increased the release in both pH 6.8 and 7.4 till it reached 40.58% and 93.65%, respectively, for 25% CAB. In enzyme-dependent polymers, increasing pectin ratio to 75% retarded the release (4.59% in pH 6.8 and 54.45% in pH 7.4) which was significantly enhanced to 99.31% using pectinolytic enzyme. Formula F14 coated with 75% pectin significantly reduced the inflammatory cells in the connective tissue core of the colon of the treated group and significantly decreased myeloperoxidase activity (3.90 U/g tissue weight). This study proved that BUD compression-coated with 75% pectin may be beneficial in the treatment of inflammatory bowel disease.     

Formulation and Optimization of Orodispersible Tablets of Diazepam

Diazepam is one of the most prescribed benzodiazepines. The purpose of the present research was to optimize the formulation of orodispersible tablets of diazepam. Orodispersible tablets of diazepam were prepared using different types of superdisintegrants (Ac-Di-Sol, sodium starch glycolate, and crospovidone (CP)) and different types of subliming agents (camphor and ammonium bicarbonate (AB)) at different concentrations and two methods of tablets preparations (wet granulation and direct compression methods). The formulations were evaluated for flow properties, wetting time, hardness, friability, content uniformity, in vivo disintegration time (DT), release profiles, and buccal absorption tests. All formulations showed satisfactory mechanical strength except formula F5 which contains camphor and formula F9 which is prepared by direct compression method. The results revealed that the tablets containing CP as a superdisintegrant have good dissolution profile with shortest DT. The optimized formula F7 is prepared using 10% CP as a superdisintegrant and 20% AB as a subliming agent by wet granulation method which shows the shortest DT and good dissolution profile with acceptable stability. This study helps in revealing the effect of formulation processing variables on tablet properties. It can be concluded that the orodispersible tablets of diazepam with better biopharmaceutical properties than conventional tablets could be obtained using formula F7.     

The Influence of the API Properties on the ODTs Manufacturing from Co-processed Excipient Systems

Directly compressible co-processed excipient systems facilitate orodispersible tablets (ODTs) manufacturing. Despite several excipient systems available, it is reported that the incorporation of high drug dose into the tablet mass may negatively affect both disintegration and mechanical properties. Therefore the influence of drug properties on the quality of orodispersible tablets was investigated. Fast dissolving tablet matrix was made of a co-processed excipient system F-Melt. Two grades of F-Melt that differed in composition, particle shape, and specific surface area were used to form tablet matrix. Ibuprofen, diclofenac sodium, and diltiazem hydrochloride were chosen as model drugs of different physicochemical properties such as solubility, particle size, and shape. Ninety formulations containing 12.5, 25, or 50 wt% of the model drug and F-Melt type C or M were prepared by direct compression. The quality of tablets was examined on the base of disintegration time, wetting time, mechanical resistance and texture analysis. The results showed that F-Melt grade, drug solubility, and its dose had an influence on the quality of tablets. From ninety formulations prepared, only four batches containing F-Melt type C and 12.5 wt% of ibuprofen, diclofenac sodium, or diltiazem hydrochloride could be classified as ODTs. Their disintegration time ranged from 41 to 144 s. In the case of F-Melt type M, tablets disintegrating within 101 s of friability below 1% could be prepared only if 12.5 wt% of diclofenac sodium was incorporated into the tablet mass.Key words: diclofenac sodium, diltiazem hydrochloride, direct compression, F-Melt, ibuprofen, ODTs     

Valsartan Orodispersible Tablets: Formulation, <Emphasis Type="Italic">In vitro</Emphasis>/<Emphasis Type="Italic">In vivo</Emphasis> Characterization

Valsartan orodispersible tablets have been developed at 40-mg dose, with the intention of facilitating administration to patients experiencing problems with swallowing and hopefully, improving its poor oral bioavailability. Work started with selecting drug compatible excipients depending on differential scanning calorimetric analysis. A 3³ full factorial design was adopted for the optimization of the tablets prepared by freeze-drying technique. The effects of the filler type, the binder type, and the binder concentration were studied. The different tablet formulas were characterized for their physical properties, weight variation, disintegration time, surface properties, wetting properties, and in vitro dissolution. Amongst the prepared 27 tablet formulas, formula number 6 (consisting of 4:6 valsartan:mannitol and 2% pectin) was selected to be tested in vivo. Oral bioavailability of two 40 mg valsartan orodispersible tablets was compared to the conventional commercial tablets after administration of a single dose to four healthy volunteers. Valsartan was monitored in plasma by high-performance liquid chromatography. The apparent rate of absorption of valsartan from the prepared tablets (C _max = 2.879 μg/ml, t _max = 1.08 h) was significantly higher than that of the conventional tablets (C _max = 1.471 μg/ml, t _max = 2.17 h), P ≤ 0.05. The relative bioavailability calculated as the ratio of mean total area under the plasma concentration–time curve for the orodispersible tablets relative to the conventional ones was 135%. The results of the in vivo study revealed that valsartan orodispersible tablets would be advantageous with regards to improved patient compliance, rapid onset of action, and increase in bioavailability.     

Meloxicam Taste-Masked Oral Disintegrating Tablet with Dissolution Enhanced by Ion Exchange Resins and Cyclodextrin

The purpose of this study was to develop taste-masked oral disintegrating tablets (ODTs) using the combination of ion exchange resin and cyclodextrin, to mask the bitter taste and enhance drug dissolution. Meloxicam (MX) was selected as a model drug with poor water solubility and a bitter taste. Formulations containing various forms of MX (free drug, MX-loaded resin or resinate, complexes of MX and 2-hydroxypropyl-β-cyclodextrin (HPβCD) or MX/HPβCD complexes, and a mixture of resinate and MX/HPβCD complexes) were made and tablets were prepared by direct compression. The ODTs were evaluated for weight variation, thickness, diameter, hardness, friability, disintegration time, wetting time, MX content, MX release, degree of bitter taste, and stability. The results showed that thickness, diameter, weight, and friability did not differ significantly for all of these formulations. The tablet hardness was approximately 3 kg/in.², and the friability was less than 1%. Tablets formulated with resinate and the mixture of resinate and MX/HPβCD complexes disintegrated rapidly within 60 s, which is the acceptable limit for ODTs. These results corresponded to the in vivo disintegration and wetting times. However, only tablets containing the mixture of resinate and MX/HPβCD complexes provided complete MX dissolution and successfully masked the bitter taste of MX. In addition, this tablet was stable at least 6 months. The results from this study suggest that the appropriate combination of ion exchange resin and cyclodextrin could be used in ODTs to mask the bitter taste of drug and enhance the dissolution of drugs that are weakly soluble in water.     

A celluloytic complex from <Emphasis Type="Italic">Clostridium cellulovorans</Emphasis> consisting of mannanase B and endoglucanase E has synergistic effects on galactomannan degradation

In our previous study using a fluorescently labeled cohesin biomarker, we detected and identified a putative cellulosomal mannanase belonging to the glycosyl hydrolase family 26 from Clostridium cellulovorans in xylan-containing cultures. In this study, a mannanase gene, manB from C. cellulovorans, was expressed in Escherichia coli. The optimal pH of a purified enzyme was around pH 7.0 and the optimal temperature was 40°C. The purified mannanase B (ManB) showed high hydrolytic activity toward galactomannan. An assembly of ManB with mini-CbpA, which contains a carbohydrate-binding module that provides proximity to insoluble substrates, increased the activity toward galactomannan [locust bean gum (LBG) and guar gum] 1.7- and 2.0-fold over those without mini-CbpA. We tested the synergistic effects on galactomannan (LBG and guar gum) degradation using cellulosomal mannanase ManB with cellulosomal endoglucanase E, which was predicted to have mannanase activity in C. cellulovorans as a cellulolytic complex. When assembled with the mini-CbpA, the mixture of endoglucanase E (EngE) and ManB at a molar ratio of 1:2 showed the highest synergistic effect (2.4-fold) on LBG. The mixture at a ratio of 1:3 showed the highest synergistic effect (2.8-fold) on guar gum. These synergistic actions indicated that ManB assembled with mini-CbpA hydrolyzed insoluble galactomannan, which in turn promoted soluble galactomannan degradation by EngE.     

Fast-disintegrating sublingual tablets: Effect of epinephrine load on tablet characteristics

The aim of this study was to evaluate the effect of increasing epinephrine load on the characteristics of fast-disintegrating sublingual tablets for the potential emergency treatment of anaphylaxis. Four tablet formulations, A, B, C, and D, containing 0%, 6%, 12%, and 24% of epinephrine bitartrate, respectively, and microcrystalline cellulose:low-substituted hydroxypropyl cellulose (9∶1), were prepared by direct compression, at a range of compression forces. Tablet weight variation, content uniformity, hardness, disintegration time, wetting time, and friability were measured for each formulation at each compression force. All 4 tablet formulations at each compression force were within the United States Pharmacopeia (USP) limits for weight variation and content uniformity. A linear increase in compression force resulted in an exponential increase in hardness for all formulations, a linear increase in disintegration and wetting times of A, and an exponential increase in disintegration and wetting times of B, C, and D. At a mean±SD hardness of ≥2.3±0.2 kg, all tablet formulations passed the USP friability test. At a mean±SD hardness of ≤3.1±0.2 kg, all tablet formulations resulted in disintegration and wetting times of <10 seconds and <30 seconds, respectively. Tablets with drug loads from 0% to 24% epinephrine can be formulated with hardness, disintegration times, and wetting times suitable for sublingual administration.     

Rheological Characterization and Drug Release Studies of Gum Exudates of Terminalia catappa Linn

The present study was undertaken to evaluate the gum exudates of Terminalia catappa Linn. (TC gum) as a release retarding excipient in oral controlled drug delivery system. The rheological properties of TC gum were studied and different formulation techniques were used to evaluate the comparative drug release characteristics. The viscosity was found to be dependent on concentration and pH. Temperature up to 60°C did not show significant effect on viscosity. The rheological kinetics evaluated by power law, revealed the shear thinning behavior of the TC gum dispersion in water. Matrix tablets of TC gum were prepared with the model drug dextromethorphan hydrobromide (DH) by direct compression, wet granulation and solid dispersion techniques. The dissolution profiles of the matrix tablets were compared with the pure drug containing capsules using the USP Basket apparatus with 500 ml phosphate buffer of pH 6.8 as a dissolution medium. The drug release from the compressed tablets containing TC gum was comparatively sustained than pure drug containing capsules. Even though all the formulation techniques showed reduction of dissolution rate, aqueous wet granulation showed the maximum sustained release of more than 8 h. The release kinetics estimated by the power law revealed that the drug release mechanism involved in the dextromethorphan matrix is anomalous transport as indicated by the release exponent n values. Thus the study confirmed that the TC gum might be used in the controlled drug delivery system as a release-retarding polymer.     

Taste masking of ondansetron hydrochloride by polymer carrier system and formulation of rapid-disintegrating tablets

The purpose of this research was to mask the intensely bitter taste of ondansetron HCl and to formulate a rapiddisintegrating tablet (RDT) of the taste-maske drug. Taste masking was done by complexing ondansetron HCl with aminoalkyl methacrylate copolymer (Eudragit EPO) in different ratios by the precipitation method. Drug-polymer complexes (DPCs) were tested for drug content, in vitro taste in simulated salivary fluid (SSF) of pH 6.2, and molecular property. Complex that did not release drug in SSF was considered taste-masked and selected for formulation RDTs. The complex with drug-polymer ratio of 8∶2 did not show drug release in SSF; therefore, it was selected. The properties of tablets such as tensile strength, wetting time, water absorption ratio, in vitro disintegration time, and disintegration in the oral cavity were investigated to elucidate the wetting and disintegration characteristics of tablets. Polyplasdone XL-10 7% wt/wt gave the minimum disintegration time. Tablets of batch F4 containing spray-dried mannitol and microcrystalline cellulose in the ratio 1∶1 and 7% wt/wt Polyplasdone XL-10 showed faster disintegration, within 12.5 seconds, than the marketed tablet (112 seconds). Good correlation between in vitro disintegration behavior and in the oral cavity was recognized. Taste evaluation of RDT in human volunteers revealed considerable taste masking with the degree of bitterness below threshold value (0.5) ultimately reaching to 0 within 15 minutes, whereas ondansetron HCl was rated intensely bitter with a score of 3 for 10 minutes. Tablets of batch F4 also revealed rapid drug release (t₉₀, 60 seconds) in SGF compared with marketed formulation (t₉₀, 240 seconds;P<.01). Thus, results conclusively demonstrated successful masking of taste and rapid disintegration of the formulated tablets in the oral cavity. Published: June 22, 2007     

Formulation design and optimization of mouth dissolve tablets of nimesulide using vacuum drying technique

The purpose of this research was to develop mouth dissolve tablets of nimesulide. Granules containing nimesulide, camphor, crospovidone, and lactose were prepared by wet granulation technique. Camphor was sublimed from the dried granules by exposure to vacuum. The porous granules were then compressed. Alternatively, tablets were first prepared percentage friability, wetting time, and disintegration time. In the investigation, a 3² full factorial design was used to investigate the joint influence of 2 formulation variables: amount of camphor and crospovidone. The results of multiple linear regression analysis revealed that for obtaining a rapidly disintegrating dosage form, tablets should be prepared using an optimum concentration of camphor and a higher percentage of crospovidone. A contour plot is also presented to graphically represent the effect of the independent variables on the disintegration time and percentage friability. A checkpoint batch was also prepared to prove the validity of the evolved mathematical model. Sublimation of camphor from tablets resulted in superior tablets as compared with the tablets prepared from granules that were exposed to vacuum. The systematic formulation approach helped in understanding the effect of formulation processing variables.     

Inhibition of random amplified polymorphic DNAs (RAPDs) by plant polysaccharides

A survey of the inhibition of the amplification of spinach DNA by various plant polysaccharides revealed that neutral polysaccharides (arabinogalactan, dextran, gum guar, gum locust bean, inulin, mannan, and starch) were not inhibitory. In contrast, the acidic polysaccharides (carrageenan, dextran sulfate, gum ghatti, gum karaya, pectin, and xylan)were inhibitory. In the process of preparing random amplified polymorphic DNAs (RAPDs), the loss of large DNA bands appears to be an indicator that the fingerprint pattern has been affected by polysaccharides. The addition of various concentrations of Tween 20, DMSO, or PEG 400 to the PCR reaction mixture resulted in partial restoration of amplification of RAPDs for the acidic polysaccharides. The most effective way to eliminate the effects of polysaccharide inhibition was by diluting the DNA extracts, and thereby diluting the polysaccharide inhibitors.     

Influence of Guar Gum on the In Vitro Starch Digestibility—Rheological and Microstructural Characteristics

The present study investigates the effect of guar gum on the digestibility of a waxy maize starch in vitro under simulated gastric and intestinal conditions. A detailed rheology and confocal scanning laser microscopy of the digesta were performed in order to study the possible mechanisms of interactions involved during in vitro hydrolysis of starch. No starch hydrolysis was observed under simulated gastric conditions, whereas more than 90% hydrolysis was observed at the end of digestion under simulated intestinal conditions. In the presence of guar gum, the starch hydrolysis was reduced by nearly 25% during the first 10 min and by 15% at the end of in vitro intestinal digestion. The rheological behavior of the digesta was significantly affected in the presence of the gum. The viscosity of digesta decreased during intestinal digestion; however, the extent of decrease was quite low in the presence of guar gum. The consistency index increased and flow behavior index of digesta decreased in the presence of gum after 1 min of intestinal digestion. All the samples (digested or undigested) displayed a pseudoplastic behavior as their apparent viscosity (η _a) decreased with an increase in shear rate. A negative correlation between the starch hydrolysis (%) and storage modulus for the starch sample without gum and a positive correlation for the starch sample with gum were found. Large granule remnants observed through confocal micrographs have shown that the solubilization of starch granule remnants during in vitro digestion is significantly reduced in the presence of gum.     

Controlled release of tamoxifen citrate encapsulated in cross-linked guar gum nanoparticles

Natural polysaccharides, due to their outstanding merits, have received more and more attention in the field of drug delivery. In the present study tamoxifen citrate, TMX (a non-steroidal antiestrogenic drug) loaded guar gum nanoparticles, GG NPs, crosslinked with glutaraldehyde were prepared for treatment of breast cancer. An oil in water (o/w) emulsion polymer cross-linking method was employed for preparation of blank and drug loaded sustained release nature biodegradable nanoparticles. Prepared nanoparticles were characterized by morphology in scanning electron microscope (SEM), size distribution in transmission electron microscope (TEM), TMX loading by high performance liquid chromatography (HPLC) and in vitro drug release characteristics. An overall sustained release of the drug from the biodegradable nanoparticles was observed in in vitro release studies. The release of TMX from GG NPs was found to be effected by guar gum and glutaraldehyde concentration. Regression coefficient (R²) analysis suggested that the predominant mechanism behind the drug release from the nanoparticles was time dependent release and diffusion. In vivo studies on female albino mice demonstrated maximum uptake of the drug by mammary tissue after 24 h of administration with drug loaded guar gum nanoparticles in comparison with that with the tablet form of the drug. These findings demonstrate that controlled release of TMX from GG NPs could be a potential alternative pharmaceutical formulation in passive targeting of TMX in breast cancer treatments.     

Adulteration identification of some fungal polysaccharides with SEM, XRD, IR and optical rotation: A primary approach

Edible mushrooms have been consumed in Asian countries for healthy functions historically with polysaccharides, which have been manufactured as ending products, as one of the major bioactive components. Driven by profits, some inglorious manufacturers conducted adulteration using cheap carbohydrates. The extracted polysaccharides from Agaricus blazei Murill, Ganoderma lucidum and Lentinus edodes were chosen as products and maltodextrin, carboxymethyl cellulose (CMC), water soluble corn starch and guar gum as adulterants for adulteration investigation. Scanning electron microscope (SEM) observation implied regular granular shapes of fungal polysaccharides different significantly from the adulterants. Infrared spectra revealed α- and β-anomeric types of polysaccharides and carbohydrates. X-ray diffractometry (XRD) suggested different diffraction patterns of polysaccharides from adulterant carbohydrates, the former were amorphous while the later somewhat crystalline of different crystallinity. Chiral properties of polysaccharides and carbohydrates showed big differences in specific rotation with good correlation between the content of “pure” fungal polysaccharides and adulterants.     

A Design and Evaluation of Layered Matrix Tablet Formulations of Metoprolol Tartrate

The aim of this paper was to evaluate the performance of different swellable polymers in the form of layered matrix tablets to provide controlled therapeutic effect of metoprolol tartrate for twice daily administration. Seven different swellable polymers (carrageenan, hydroxypropylmethyl cellulose, pectin, guar gum, xanthan gum, chitosan, and ethyl cellulose) were evaluated alone or in combination as release-retardant layer. Tablets were tested for weight variation, hardness, diameter/thickness ratio, friability, and drug content uniformity and subjected to in vitro drug-release studies. In addition, the target-release profile of metoprolol tartrate was plotted using its clinical pharmacokinetic data, and the release profiles of the tablets were evaluated in relation to the plotted target release profile. Carrageenan was determined as the best polymer in two-layered matrix tablet formulations due to its better accordance to the target release profile and was selected for preparing three-layered matrix tablets. Carrageenan formulations exhibited super case II release mechanism. Accelerated stability testing was performed on two- and three-layered matrix tablet formulations of carrageenan. The tablets were stored at 25°C/60% relative humidity and 40°C/75% relative humidity for 6 months and examined for physical appearance, drug content, and release characteristics. At the end of the storage time, formulations showed no change either in physical appearance, drug content, or drug-release profile. These results demonstrated the suitability of three-layered tablet formulation of carrageenan to provide controlled release and improved linearity for metoprolol tartrate in comparison to two-layered tablet formulation.     

Terminalia Gum as a Directly Compressible Excipient for Controlled Drug Delivery

The exudates from the incised trunk of Terminalia randii has been evaluated as controlled release excipient in comparison with xanthan gum and hydroxypropylmethylcellulose (HPMC) using carvedilol (water insoluble) and theophylline (water soluble) as model drugs. Matrix tablets were prepared by direct compression and the effects of polymer concentration and excipients—spray dried lactose, microcrystalline cellulose and dicalcium phosphate dihydrate on the mechanical (crushing strength (CS) friability (F) and crushing strength–friability ratio (CSFR)) and drug release properties of the matrix tablets were evaluated. The drug release data were fitted into different release kinetics equations to determine the drug release mechanism(s) from the matrix tablets. The results showed that the CS and CSFR increased with increase in polymer concentration while F decreased. The ranking of CS and CSFR was HPMC > terminalia > xanthan while the ranking was reverse for F. The ranking for t ₂₅ (i.e. time for 25% drug release) at a polymer concentration of 60% was xanthan > terminalia = HPMC. The dissolution time, t ₂₅, of theophylline matrices was significantly lower (p < 0.001) than those of carvedilol matrix tablets. Drug release from the matrices was by swelling, diffusion and erosion. The mechanical and drug release properties of the tablets were significantly (p < 0.05) dependent on the type and concentration of polymer and excipients used with the release mechanisms varying from Fickian to anomalous. Terminalia gum compared favourably with standard polymers when used in controlled release matrices and could serve as a suitable alternative to the standard polymers in drug delivery.     

Evaluation of guar gum derivatives as gelling agents for microbial culture media

Guar gum, a galactomannan, has been reported to be an inexpensive substitute of agar for microbial culture media. However, its use is restricted probably because of (1) its highly viscous nature even at high temperatures, making dispensing of the media to Petri plates difficult and (2) lesser clarity of the guar gum gelled media than agar media due to impurities present in guar gum. To overcome these problems, three guar gum derivatives, carboxymethyl guar, carboxymethyl hydroxypropyl guar and hydroxypropyl guar, were tested as gelling agents for microbial growth and differentiation. These were also evaluated for their suitability for other routine microbiological methods, such as, enumeration, use of selective and differential media, and antibiotic sensitivity test. For evaluation purpose, growth and differentiation of eight fungi and eight bacteria grown on the media gelled with agar (1.5%), guar gum (4%) or one of the guar gum derivatives (4%), were compared. All fungi and bacteria exhibited normal growth and differentiation on all these media. Generally, growth of most of the fungi was better on guar gum derivatives gelled medium than on agar medium. The enumeration carried out for Serratia sp. and Pseudomonas aeruginosa by serial dilution and pour plate method yielded similar counts in all the treatments. Likewise, the selective succinate medium, specific for P. aeruginosa, did not allow growth of co-inoculated Bacillus sp. even if gelled with guar gum derivatives. The differential medium, Congo red mannitol agar could not differentiate between Agrobacterium tumefaciens and Rhizobium meliloti on color basis, if gelled with guar gum or any of its derivatives However, for antibiotic sensitivity tests for both Gram-positive and -negative bacteria, guar gum and its derivatives were as effective as agar.     

Neem Gum as a Binder in a Formulated Paracetamol Tablet with Reference to Acacia Gum BP

This study determined the physical, compressional, and binding properties of neem gum (NMG) obtained from the trunk of Azadirachta indica (A Juss) in a paracetamol tablet formulation in comparison with official Acacia gum BP (ACA). The physical and flow properties were evaluated using density parameters: porosity, Carr’s index, Hausner’s ratio, and flow rate. Compressional properties were analyzed using Heckel and Kawakita equations. The tensile strength, brittle fracture index, and crushing strength–friability/disintegration time ratio were used to evaluate the mechanical properties of paracetamol tablets while the drug release properties of the tablets were assessed using disintegration time and dissolution times. Tablet formulations containing NMG exhibited faster onset and higher amount of plastic deformation during compression than those containing ACA. Neem gum produced paracetamol tablets with lower mechanical strength; however, the tendency of the tablets to cap or laminate was lower when compared to those containing ACA. Inclusion of NMG improved the balance between binding and disintegration properties of paracetamol tablets produced than those containing ACA. Neem gum produced paracetamol tablets with lower disintegration and dissolution times than those containing ACA.