Artificial protein block polymer libraries bearing two SADs: effects of elastin domain repeats

We have generated protein block polymer E(n)C and CE(n) libraries composed of two different self-assembling domains (SADs) derived from elastin (E) and the cartilage oligomeric matrix protein coiled-coil (C). As the E domain is shortened, the polymers exhibit an increase in inverse transition temperature (T(t)); however, the range of temperature change differs dramatically between the E(n)C and CE(n) library. Whereas all polymers assemble into nanoparticles, the bulk mechanical properties of the E(n)C are very different from CE(n). The E(n)C members demonstrate viscolelastic behavior under ambient conditions and assemble into elastic soft gels above their T(t) values. By contrast, the CE(n) members are predominantly viscous at all temperatures. All library members demonstrate binding to curcumin. The differential thermoresponsive behaviors of the E(n)C and CE(n) libraries in addition to their small molecule recognition abilities make them suitable for potential use in tissue engineering and drug delivery.     

Self-assembly and polymerization of diacetylene-containing peptide amphiphiles in aqueous solution

A systematic study was performed of the fiber forming properties and polymerization characteristics of two peptide amphiphiles containing a diacetylene functionality in the alkyl tail comprising 23 and 25 C atoms, respectively. Both diyne containing peptide amphiphiles were able to form stable beta-sheet fibers of micrometers length in an aqueous solution. However, there was a large difference between the stability of the two amphiphiles. This was shown by a large difference in assembly and disassembly temperature and by different behavior during polymerization. Because the monomers were preorganized with a tight molecular packing, the polymerization could be carried out using wavelengths up to 532 nm. For both amphiphiles, the fiber structure did not change when the polymerization was carried out at an elevated temperature. The degree of polymerization, however, barely decreased for the longer amphiphile (2) but showed a gradual decline for the shorter one (1) when the temperature was raised from room temperature to the melting temperature of the fibers. Furthermore, the pH did not influence the fiber assembly for 2, but hampered it for 1 at alkaline pH. The fiber structure was, for both of the amphiphiles, not dependent on the pH. After polymerization, the molecular packing of the amphiphiles was only slightly influenced by an increase in temperature, as indicated by the small color change of polymerized fibers, which was also reversible. Additionally, pH had no influence on the assembly structure, as indicated by the color of the polymer which was the same at all pH values. Thus, both fibers increased in stability upon polymerization. The large difference in assembly and polymerization behavior of the two similar-looking amphiphiles 1 and 2, with a 23 or 25 carbon tail, is indicative of the subtlety of the assembly and disassembly processes in these fibrous architectures.     

Secondary relaxations in supercooled and glassy sucrose-borate aqueous solutions

The dielectric relaxation spectra of concentrated aqueous solutions of sucrose-borate mixtures have been measured in the supercooled and glassy regions in the frequency range of 40Hz to 2MHz. The secondary (beta) relaxation process was analyzed in the temperature range 183-233K at water contents between 20 and 30wt%. The relaxation times were obtained, and the activation energy of that process was calculated. In order to assess the effect of borate on the relaxation of disaccharide-water mixtures, we also studied the dielectric behavior of sucrose aqueous solutions in the same range of temperatures and water contents. Our findings support the view that, beyond a water content of approximately 20wt%, the secondary relaxation of water-sucrose and water-sucrose-borate mixtures adopts a universal character that can be explained in terms of a simple exponential function of the temperature scaled by the glass transition temperature (T(g)). The behavior observed for water-sucrose and water-sucrose-borate mixtures is compared with previous results obtained in other water-carbohydrate systems.     

Molecular assemblies of diazafluorenone Schiff-base amphiphiles. II. The vesicle and its molecular aggregation behavior

The self-assembling properties of a series of single-chain (C₁₂–C₁₈) amphiphilic ligands, diazafluorenone Schiff bases (DAFSB), were studied in dilute aqueous solutions by various physical methods. Transmission electron microscopy (TEM) shows that these amphiphiles can form vesicles with diameters of 50–250 nm and layer widths of about 5 nm. UV-vis spectra reflect the formation of J-like aggregates in bilayer assemblies. The gel to liquid-crystal phase-transition behavior of the bilayer in vesicles was investigated by differential scanning calorimetry (DSC), and the phase transition temperature,T _m, ranged between 60 and 75 °C. The experimental results indicate that DAFSB is a new type of bilayer-forming agent and provides a good model system for studying the interactions between metal ions and amphiphiles.     

Thermoresponsive heparin bioconjugate as novel aqueous antithrombogenic coating material

A novel thermoresponsive aqueous antithrombogenic coating material comprising a heparin bioconjugate with a six-branched, star-shaped poly(2-(dimethylaminoethyl)methacrylate) (6B-PDMAEMA), which has both thermoresponsive and cationic characters, was developed to reduce the thrombogenic potential of blood-contacting materials such as synthetic polymers or tissue-engineered tissues in cardiovascular devices. 6B-PDMAEMA with M(n) of ca. 24 kDa was designed as a prototype compound by initiator-transfer agent-terminator (iniferter)-based living radical photopolymerization from hexakis(N,N-diethyldithiocarbamylmethyl)benzene. Bioconjugation of heparin with 6B-PDMAEMA occurred as soon as both aqueous solutions were simply mixed to form particles. The particle size at 25 °C was less than several hundred nanometers in diameter under a heparin/6B-PDMAEMA mixing weight ratio of over 2.5. The particles were very stable because of the prevention of hydrolysis of 6B-PDMAEMA in its bioconjugated form. Because the lower critical solution temperature of the bioconjugate ranges from approximately 20 to 36 °C for the formation of microparticles, the coating could be done in an aqueous solution at low temperatures. The excellent adsorptivity and high durability of the coating above 37 °C was demonstrated on silicone and polyethylene films by surface chemical compositional analysis. Blood coagulation was significantly reduced on the bioconjugate-coated surfaces. Therefore, the thermoresponsive bioconjugate developed here appears to satisfy the initial requirements for a biocompatible aqueous coating material.     

Self-organized Polymer Aggregates with a Biomimetic Hierarchical Structure and its Superhydrophobic Effect

Nature always gives us inspirations to fabricate functional materials by mimicking the structure design of biomaterials. In this article, we report that polymeric aggregates with morphology similar to the papilla on lotus leaf can be self-organized in the polymer solution by adding 16 wt% water into 5 mg/ml polycarbonate solution in N, N′-dimethylformamide. The hierarchically structured aggregates at micro- and nano-scale alone show superhydrophobic effect without the need of modification with low surface energy compound. Small amount of liquid can be wrapped by the aggregates to form the so-called liquid marble. Influence of the amount of water added into the solution on the morphology of resultant polymer aggregates was investigated. By using the hierarchical aggregates as the surface building blocks, superhydrophobic coating with a static water contact angle larger than 160° and sliding angle less than 5° (for a water drop of 5 μl) was formed. Other solutions, like acid, basic and blood plasma are also repelled on the coating.     

Amphiphilic molecular gels from ω-aminoalkylated l-glutamic acid derivatives with unique chiroptical properties

Self-assembling amphiphiles with unique chiroptical properties were derived from l-glutamic acid through ω-aminoalkylation and double long-chain alkylation. These amphiphiles can disperse in various solvents ranging from water to n-hexane. TEM and SEM observations indicate that the improvement in dispersity is induced by the formation of tubular and/or fibrillar aggregates with nanosized diameters, which makes these amphiphiles similar to aqueous lipid membrane systems. Spectroscopic observations, such as UV–visible and CD spectroscopies indicate that the aggregates are constructed on the basis of S- and R-chirally ordered structures through interamide interactions in water and organic media, respectively, and that these chiroptical properties can be controlled thermotropically and lyotropically. It is also reported that the chiral assemblies provide specific binding sites for achiral molecules and then induce chirality for the bonded molecules. Further, the applicability of the amphiphiles to template polymerization is discussed.     

Phase diagram of 1,2-dioleoylphosphatidylethanolamine (DOPE):water system at subzero temperatures and at low water contents.

The phase behavior of partially hydrated 1, 2-dioleoylphosphatidylethanolamine (DOPE) has been studied using differential scanning calorimetry and X-ray diffraction methods together with water sorption isotherms. DOPE liposomes were dehydrated in the H(II) phase at 29 degrees C and in the L(alpha) phase at 0 degrees C by vapor phase equilibration over saturated salt solutions. Other samples were prepared by hydration of dried DOPE by vapor phase equilibration at 29 degrees C and 0 degrees C. Five lipid phases (lamellar liquid crystalline, L(alpha); lamellar gel, L(beta); inverted hexagonal, H(II); inverted ribbon, P(delta); and lamellar crystalline, L(c)) and the ice phase were observed depending on the water content and temperature. The ice phase did not form in DOPE suspensions containing <9 wt% water. The L(c) phase was observed in samples with a water content of 2-6 wt% that were annealed at 0 degrees C for 2 or more days. The L(c) phase melted at 5-20 degrees C producing the H(II) phase. The P(delta) phase was observed at water contents of <0.5 wt%. The phase diagram, which includes five lipid phases and two water phases (ice and liquid water), has been constructed. The freeze-induced dehydration of DOPE has been described with the aid of the phase diagram.     

New evidence of the nonequilibrium nature of the "slow modes" of diffusion in polyelectrolyte solutions

The time-dependent behavior of the dissolution of polyelectrolyte powders in pure water and moderate ionic strength aqueous solvent was monitored by flowing dissolving material through an online filter, and then through a multiangle light scattering unit, a refractometer, and a capillary viscometer. When the polyelectrolytes were dissolved in solutions of moderate ionic strength, their dissolution behavior was similar to that of neutral polymers. When dissolved in pure water, however, there was consistently a small population of aggregates that appeared at the beginning of the dissolution process, which then rapidly diminished. For large pore filtration, the aggregates reached a final low level, and slowly disappeared over the span of many days, whereas for small pore filtration the aggregates disappeared completely over a scale of minutes. The real-time data, together with size exclusion chromatography analysis, shed light on previously unanswered questions concerning the nonequilibrium nature of this small population of polyelectrolyte aggregates in low ionic strength solutions, and its relation to the "extraordinary phase" of diffusion (or "slow modes"). Further evidence is also provided that both angular scattering maxima due to interpolyion correlations and the maximum of reduced viscosity vs polyion concentration ("electroviscous" effect) at low ionic strength are equilibrium properties that are unrelated to these aggregates.     

Phase-transition and aggregation characteristics of a thermoresponsive dextran derivative in aqueous solutions

Grafting of poly(N-vinylcaprolactam) side chains onto a hydrophilic dextran backbone was found to provide the dextran with new, thermoresponsive properties in aqueous solutions. Depending on its solution concentration, the resulting dextran derivative could exhibit a temperature-induced phase-transition and critical transition temperature (T(c)). Different anions and cations of added salts, including five potassium salts and five alkali-metal chlorides, were observed to influence the T(c) value of its aqueous solution. Except for potassium iodide, all added salts were found to lower the T(c) value. The addition of the surfactant, cationic cetyltrimethylammonium bromide or anionic sodium dodecyl sulfate, resulted in an increase of the T(c) value. With the help of the Coomassie Brilliant Blue dye as a polarity probe, the formation of hydrophobic aggregates above the T(c) was revealed for this new dextran derivative in aqueous solution.     

Studies on surfactant-biopolymer interaction. I. Microcalorimetric investigation on the interaction of cetyltrimethylammonium bromide (CTAB) and sodium dodecylsulfate (SDS) with gelatin (Gn), lysozyme (Lz) and deoxyribonucleic acid (DNA)

The interaction of the surfactants cetyltrimethyl ammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) with the biopolymers gelatin (Gn), lysozyme (Lz) and deoxyribonucleic acid (DNA) was studied by isothermal titration microcalorimetry at varied biopolymer concentration, pH and temperature. The nature of interaction of the surfactants with the biopolymers was assessed from the observed enthalpy-[surfactant] profiles. The biopolymer-induced aggregation of the surfactants was observed. The enthalpies of aggregation of amphiphiles, binding of aggregates with macromolecules, organisational change of bound aggregates, and threshold concentrations for micelle formation of surfactants in the presence of biopolymers were estimated. The results collected on the three biopolymers were analysed and compared.     

Cationic amphiphiles and the solubilization of cholesterol crystallites in membrane bilayers

Cationic amphiphiles used for transfection can be incorporated into biological membranes. By differential scanning calorimetry (DSC), cholesterol solubilization in phospholipid membranes, in the absence and presence of cationic amphiphiles, was determined. Two different systems were studied: 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)+cholesterol (1:3, POPC:Chol, molar ratio) and 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-l-serine] (POPS)+cholesterol (3:2, POPS:Chol, molar ratio), which contain cholesterol in crystallite form. For the zwitterionic lipid POPC, cationic amphiphiles were tested, up to 7 mol%, while for anionic POPS bilayers, which possibly incorporate more positive amphiphiles, the fractions used were higher, up to 23 mol%. 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and DOTAP in methyl sulfate salt form (DOTAPmss) were found to cause a small decrease on the enthalpy of the cholesterol transition of pure cholesterol aggregates, possibly indicating a slight increase on the cholesterol solubilization in POPC vesicles. With the anionic system POPS:Chol, the cationic amphiphiles dramatically change the cholesterol crystal thermal transition, indicating significant changes in the cholesterol aggregates. For structural studies, phospholipids spin labeled at the 5th or 16th carbon atoms were incorporated. In POPC, at the bilayer core, the cationic amphiphiles significantly increase the bilayer packing, decreasing the membrane polarity, with the cholesterol derivative 3 beta-[N-(N',N'-dimethylaminoethane)-carbamoyl]-cholesterol (DC-chol) displaying a stronger effect. In POPS and POPS:Chol, DC-chol was also found to considerably increase the bilayer packing. Hence, exogenous cationic amphiphiles used to deliver nucleic acids to cells can change the bilayer packing of biological membranes and alter the structure of cholesterol crystals, which are believed to be the precursors to atherosclerotic lesions.     

具液晶性的天然高分子—N—邻苯二甲酰化壳聚糖的合成与表征

本文在不同条件下制备了一种液晶性天然高分子——N-邻苯二甲酰化壳聚糖,定性讨论了反应条件对壳聚糖的N-邻苯二甲酰化反应的影响。研究了N一邻苯二甲酰化壳聚糖的溶解性、成膜性、结晶性,并重点研究了其液晶性,测定出室温下它在二氯乙酸和二甲亚砜溶液中的临界浓度都为24wt％,在三氟乙酸溶液中的临界浓度为14wt％。     

Studies on replacing most of the penetrating cryoprotectant by polymers for embryo cryopreservation.

Solutions used for vitrification or rapid cooling of embryos usually contain high concentrations of penetrating cryoprotectants. At these concentrations embryos can tolerate the penetrating cryoprotectants for only short periods of time without damage. This study designed and tested cryoprotectant solutions that combined high polymer concentrations with low penetrating cryoprotectant concentrations. Mouse 2-cell embryo development was not compromised by up to 15-min exposure to 30 wt% solutions of the polymers Ficoll 70,000 MW or dextran 69,000 MW at room temperature. However, our batches of polyvinylpyrrolidone (PVP) 10,000 and PVP 40,000 were embryo-toxic even after extensive dialysis against Milli-Q water. As both Ficoll and dextran contribute to a solution's physical vitrification properties, we formulated vitrifying solutions containing only 11 to 27 wt% ethylene glycol (EG) by including 34 to 49 wt% polymers (27 wt% EG + 34 wt% Ficoll, 27 wt% EG + 34 wt% dextran, 16 wt% EG + 39 wt% Ficoll, or 11 wt% EG + 49 wt% Ficoll, in phosphate-buffered saline (PBS)). Novel solutions were designed for 0.25 ml straw as a viscous matrix for encapsulation of embryos. These yielded high rates of development of 2-cell mouse embryos after rapid cooling and warming (> or = 96% expanded blastocysts in vitro and > or = 62% viable fetuses as assessed on day 15 of gestation in vivo) in all tested solutions. All control 2-cell embryos formed expanded blastocysts in vitro and 78% formed fetuses in vivo. Comparable results were obtained with both 4-cell and 8- to 16-cell mouse embryos. The lower toxicity of Ficoll and dextran may explain why these new solutions gave better results than had previously been reported for solutions containing 7.5% PVP and low concentrations of EG (2 M).     

Thermoresponsive polypeptides from pegylated poly-L-glutamates

The synthesis and characterization of new thermoresponsive pegylated poly-L-glutamate (poly-L-EG(x)Glu) are described. The obtained polypeptides display low critical solution temperature (LCST) behaviors in water, and the LCST can be tuned via copolymerization of different amino acid monomers at varied molar ratio. This is the first example of thermoresponsive polypeptide made from ring-opening polymerization of α-amino acid N-carboxyanhydrides (NCAs). Circular dichroism characterizations reveal that the secondary structure of poly-L-EG(x)Glu depended on the chain length of the side chain.     

Polymorphism of pyridinium amphiphiles for gene delivery: influence of ionic strength, helper lipid content, and plasmid DNA complexation

Two double-tailed pyridinium cationic amphiphiles, differing only in the degree of unsaturation of the alkyl chains, have been selected for a detailed study of their aggregation behavior, under conditions employed for transfection experiments. The transfection efficiencies of the two molecules are remarkably different, especially when combined with 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) as helper lipid. The phase behavior of the cationic amphiphile/DOPE mixtures have been studied using (31)P- and (2)H-NMR (on deuterated cationic amphiphiles) as main techniques, to monitor independently the behavior of the two components. In water, the lamellar organization is dominant for both the surfactants in their mixtures with the helper lipid. In HEPES saline buffer (HBS), the mixtures of the unsaturated surfactant form inverted phases and, in particular, stable H(II) phases for DOPE contents > or =30 mol %. By contrast, the saturated surfactant does not form homogeneously mixed inverted phases in mixtures with DOPE at room temperature. However, mixed inverted phases are observed for this system at higher temperatures and, after mixing has been achieved by heating, the metastable mixed phases remain present for several hours at 5 degrees C. At 35 degrees C the dominant phase is the cubic phase. The lipoplex composed of equimolar mixtures of the unsaturated surfactant with DOPE and plasmid DNA was found to be organized in highly curved bilayers.     

Novel chitosan-based films cross-linked by genipin with improved physical properties

Novel cross-linked chitosan-based films were prepared using the solution casting technique. A naturally occurring and nontoxic cross-linking agent, genipin, was used to form the chitosan and chitosan/poly(ethylene oxide) (PEO) blend networks, where two types of PEO were used, one with a molecular weight of 20 000 g/mol (HPEO) and the other of 600 g/mol (LPEO). Genipin is used in traditional Chinese medicine and extracted from gardenia fruit. Importantly, it overcomes the problem of physiological toxicity inherent in the use of some common synthetic chemicals as cross-linking agents. The mechanical properties and the stability in water of cross-linked and un-crosslinked chitosan and chitosan/PEO blend films were investigated. It was shown that, compared to the transparent yellow, un-cross-linked chitosan/PEO blend films, the genipin-cross-linked chitosan-based film, blue in color, was more elastic, was more stable, and had better mechanical properties. Genipin-cross-linking produced chitosan networks that were insoluble in acidic and alkaline solutions but were able to swell in these aqueous media. The swelling characteristics of the films exhibit sensitivity to the environmental pH and temperature. The surface properties of the films were also examined by contact angle measurements using water and mixtures of water/ethanol. The results showed that, with the one exception of cross-linked pure chitosan in 100% water, the cross-linked chitosan and chitosan/PEO blends were more hydrophobic than un-crosslinked ones.     

Interfacial properties and structural analysis of the antimicrobial peptide NK-2.

The structure of the antimicrobial peptide NK-2 has been studied at the air-water interface and in different solutions using spectroscopic methods such as circular dichroism (CD) and infrared reflection absorption spectroscopy (IRRAS) as well as specular X-ray reflectivity (XR). NK-2 adopts an unordered structure in water, buffer, and in the presence of monomeric cationic and noncharged amphiphiles. However, it forms a stable alpha-helix in 2,2,2-trifluoroethanol (TFE) and in micellar solutions of anionic, cationic as well as nonionic amphiphiles, whereas only in sodium dodecyl sulfonate solutions the alpha-helical structure can also be found below the critical micellar concentration (cmc). The amphiphilic molecule NK-2 is surface active and forms a Gibbs monolayer at the air-buffer interface. In contrast, no adsorption was observed if NK-2 is dissolved in water. During the adsorption process in buffer solutions, NK-2 undergoes a conformational transition from random coil in bulk to alpha-helix at the interface. This change of the peptide's secondary structure is known to be associated with its antimicrobial activity. A comparison of the experimental IRRA spectra with the simulated spectra indicates that the adsorbed NK-2 alpha-helix lies flat at the interface. This is confirmed by XR measurements which show that the thickness of the NK-2 layer is approximately 17 A, which is the average diameter of a alpha-helix, indicating that only a monomolecular adsorption layer is formed.