Comparative assessment of the cell-surface antigens and gene expression profiles of the gingival tissue biomarkers in subjects with fixed functional and removable functional orthodontic appliances

BackgroundThis study aimed to examine the cellular components of the gingiva during orthodontic treatment with fixed and removable appliances. The cellular and molecular cues of pathologies of the gingival tissue associated with the use of different orthodontic appliances could be studied.Materials and methodsTissue samples of gingiva were received from healthy patients undergoing gingivectomy for aesthetic purpose and from patients with fixed and removable functional orthodontic appliances undergoing gingivectomy for gingival overgrowth. The collected samples were stored in a sterile container with phosphate-buffered saline and to carry out further processes it was transported to the laboratory.ResultsCells positive for ECAD and NCAD were found to be increased in fixed appliances where as CD90 and CD105 positive cells showed no significant difference in all the three groups. CD24 and CD146 positive cells were increased significantly in removable and fixed than normal whereas CD133 positive cells were decreased in removable and fixed than normal. CD44 positive cells showed no noticeable change in all three groups. The gene expression levels of KRT5, SOX2, NANOG, and CXCL5 were found to be significantly increased in removable and fixed appliance groups. However, KRT8, CXCL10, and TIMP1 were increased only in fixed appliance group but CXCL10 showed decreased expression in removable appliance group. KRT6A, MYC, and MMP9 were decreased in fixed appliance group whereas MYC and MMP9 were increased in removable appliance group. KRT6A, KRT8, and TIMP1 showed no significant difference in removable appliance group.ConclusionThis study demonstrated essential roles of various genes, showing their contribution in regulating cell proliferation and migration in both the removable and fixed functional appliances.     

Antimicrobial activity of denture adhesive associated with Equisetum giganteum- and Punica granatum-enriched fractions against Candida albicans biofilms on acrylic resin surfaces

Candida biofilms adhere to the internal surface of removable dentures, which is an etiological factor in the pathogenesis of denture stomatitis (DS). Adhesive materials are used at the base of maxillary complete dentures to improve their retention and chewing qualities. This article reports the antimicrobial activity of the enriched fractions of Equisetum giganteum and Punica granatum incorporated into a denture adhesive against C. albicans biofilm. The biofilms were induced on the surface of heat-cured acrylic resin specimens that were previously treated with a mixture of adhesive/herb extracts. The antimicrobial activity was evaluated by CFU counts, XTT reduction, and SEM and CLSM analysis. Both herb extracts amplified the anti-biofilm action of the adhesive on the acrylic resin by up to 12 h. Therefore, when these extracts were combined with COREGA®, they played a collaborative and innovative role in biofilm control and can be considered alternatives for temporary use in the treatment and/or prevention of DS.     

Susceptibility of MRSA biofilms to denture-cleansing agents

Methicillin-resistant Staphylococcus aureus (MRSA) is an important nosocomial pathogen, which is responsible for considerable morbidity and mortality in the United Kingdom. The major reservoir of this organism is thought to be the anterior nares, but there is increasing evidence that this pathogen is present in the oral cavity, particularly in denture wearers. The purpose of this study was to determine whether MRSA, grown as biofilms on denture acrylic resin, could be eradicated using commercially available agents. EMRSA-15 or EMRSA-16 was grown in a model system on the surface of denture acrylic resin for 4, 24 or 120 h before the samples were exposed to a range of disinfectants for time intervals of 1, 5 and 10 min. All of the agents reduced the number of cultivable MRSA bacteria present on the acrylic resin surface at 4 h, with 2% sodium hypochlorite (NaOCl) eliminating MRSA below the level of detection after an exposure of 1 min. However, the established MRSA biofilms (24 and 120 h) were more resistant to killing by the agents, although 2% NaOCl was still able to eradicate all ages of MRSA biofilms within 1 min of exposure.     

Effect of monomer treatment and polymerisation methods on the bond strength of resin teeth to denture base material

Background: The fracture between acrylic denture base material and artificial teeth is a common clinical occurrence in dental prosthodontic practice. Objective: To evaluate the bond strength between acrylic resins and resin denture teeth when submitted by two protocols of monomer liquid application on the tooth surface and using different polymerisation methods. Material and methods: Microwave‐polymerised (Onda‐Cryl), heat‐polymerised (Clássico) and autopolymerising (Jet) acrylic resins and a brand of resin denture teeth (Biotone) were used. The acrylic resins were polymerised according to the cycles: (A) microwave – fast cycle, Onda‐Cryl; (B) microwave – long cycle, Onda‐Cryl; (C) microwave – manufacturer’s cycle, Onda‐Cryl; (T) water bath – long cycle, Clássico and (Q) bench polymerisation cycle, Jet. Thirty specimens were prepared for each polymerisation method; 10 were packed with acrylic resin after 60 s of monomer liquid application on the tooth surface, 10 after 180 s and 10 without any monomer liquid application. For the purpose of the study, a shear test was used. anova and Tukey tests were performed to identify significant differences (α = 0.05). Results: The highest bond strength values were found for monomer surface treatments, regardless of the polymerisation cycles. The highest significant values were found for cycles B (15.4 ± 1.8 MPa), C (11.9 ± 4.9 MPa) and T (15.4 ± 2.6 MPa) for non‐treated and 60 s methylmethacrylate treated groups. Comparing the monomer liquid treatment, they did not differ significantly (p > 0.05), except for cycle A (p < 0.05). Conclusion: Chemical treatment using monomer on the tooth surface prior to the acrylic resin packing improved the bond strength between resin denture tooth and acrylic resin, regardless of monomer liquid treatment protocols. The microwavable resin, polymerised by fast cycle and autopolymerising resin should be avoided for processing denture and denture repairs, respectively.     

Effect of autoclave postpolymerization treatments on the fracture toughness of autopolymerizing dental acrylic resins

Introduction: Microwave and water bath postpolymerization have been suggested as methods to improve the mechanical properties of heat and autopolymerizing acrylic resins. However, the effects of autoclave heating on the fracture properties of autopolymerizing acrylic resins have not been investigated. Purpose: The aim of this study was to assess the effectiveness of various autoclave postpolymerization methods on the fracture properties of 3 different autopolymerizing acrylic resins. Methods: Forty-two specimens of 3 different autopolymerizing acrylic resins (Orthocryl, Paladent RR and Futurajet) were fabricated (40x8x4mm), and each group was further divided into 6 subgroups (n=7). Control group specimens remained as processed (Group 1). The first test group was postpolymerized in a cassette autoclave at 135°C for 6 minutes and the other groups were postpolymerized in a conventional autoclave at 130°C using different time settings (5, 10, 20 or 30 minutes). Fracture toughness was then measured with a three-point bending test. Data were analyzed by ANOVA followed by the Duncan test (α=0.05). Results: The fracture toughness of Orthocryl and Paladent-RR acrylic resins significantly increased following conventional autoclave postpolymerization at 130°C for 10 minutes (P<.05). However, the fracture toughness of autoclave postpolymerized Futurajet was not significantly different than its control specimens (P<.05). The fracture toughness of Futurajet was significantly less than Paladent RR and Orthocryl specimens when autoclaved at 130°C for 10 minutes. Conclusions: Within the limitations of this study, it can be suggested that autoclave postpolymerization is an effective method for increasing the fracture toughness of tested autoploymerized acrylic resins.     

上颌固定矫治器联合下颌垫及颏兜矫治恒前牙反

目的:探讨矫治恒前牙反(牙合)的方法。方法:将50例恒前牙反(牙合)患者分为两组,用固定矫治器和活动矫治器矫治,观察解除反(牙合)所需的时间。结果:结果显示固定矫治组疗程明显短于活动矫治组。结论:对于恒前牙反(牙合)患者,可以用固定矫治器联合下颌(牙合)垫、颏兜矫治,缩短疗程,达到理想治疗效果。     

Antimicrobial and mechanical properties of acrylic resins with incorporated silver-zinc zeolite - part I

Objective: The purpose of this in vitro study was to evaluate the antimicrobial activity of acrylic resins containing different percentages of silver and zinc zeolite, and to assess whether the addition of zeolite alters the flexural and impact strength of the resins. Background: The characteristics of acrylic resins support microorganism development that can threaten the health of the dentures user. Material and methods: A microwave‐polymerised (Onda‐Cryl) and two heat‐polymerised (QC20 and Lucitone 550) acrylic resins were used. The materials were handled according to the manufacturers’ instructions. Fifty rectangular‐shaped specimens (8 × 10 × 4mm) were fabricated from each resin and assigned to 5 groups (n = 10) according to their percentage of Irgaguard B5000 silver–zinc zeolite (0%– control, 2.5%, 5.0%, 7.5% and 10%). Flexural strength and Izod impact strength were evaluated. The antimicrobial activity against two strains of Candida albicans and two strains of Streptococcus mutans was assessed by agar diffusion method. Data were analysed statistically by one‐way anova and Tukey’s test at 5% significance level. Results: The addition of 2.5% of Irgaguard B5000 to the materials resulted in antimicrobial activity against all strains. Flexural strength decreased significantly with the addition of 2.5% (QC20 and Lucitone 550) and 5.0% (Onda‐Cryl) of Irgaguard B5000. The impact strength decreased significantly with the addition of 2.5% (Lucitone 550) and 5.0% (QC20 and Onda‐Cryl) of zeolite. Conclusion: The addition of silver–zinc zeolite to acrylic resins yields antimicrobial activity, but may affect negatively the mechanical properties, depending on the percentage of zeolite.     

The effect of immersion cleansers on gloss,colour and sorption of acetal denture base material

doi: 10.1111/j.1741‐2358.2012.00657.x The effect of immersion cleansers on gloss, colour and sorption of acetal denture base material Objective: To study the effect of peroxide and hypochlorite cleansers on gloss, colour and sorption of acetal denture resins. Materials and methods: Pink acetal and thermoplastic acrylic resins were evaluated. Thirty‐five specimens 39 × 39 × 1.8 mm of each resin were prepared. Each group of specimens (n = 7) was then immersed into cleansers for 100 days. Group I immersed in tap water, Group II in Corega Extradent for 5 min, Group III in Corega Extradent for 8 h, Group IV in NitrAdine? Seniors for 15 min and Group V in NaOCl 5.25%. Gloss, colour and weight measurements were taken initially and after 100 days. Data subjected to two‐way anova and Tukey’s test at α = 0.05. Results: Acrylic resin showed reductions of glossiness from ?5 to ?15 and acetal from ?0.2 to ?6. Colour changes (ΔΕ*) ranged from 2.64 to 7.64 for acrylic and 2.77 to 26.54 for acetal resin. Sorption for acrylic ranged from 11.64 to 17.06 μg/mm³ and 9.18 to 24.79 μg/mm³ for acetal resin. The results of (ΔΕ*) and sorption showed an interaction between denture resins and cleansers. Conclusions: The gloss of acetal resin was less affected by water, peroxides and NaOCl 5.25% compared with acrylic resin. Acetal resin showed clinically acceptable (ΔΕ*) whereas acrylic resin unacceptable ones for water and peroxide solutions. The immersion of acetal resin in NaOCl 5.25% showed clinically unacceptable (ΔΕ*) and higher sorption and should be avoided or should be managed with care.     

Enzyme histochemical demonstration of NADH dehydrogenase on resin-embedded tissue

We describe a method for enzyme histochemical demonstration of NADH dehydrogenase in cold (4 degrees C)-processed resin-embedded tissue. The effects on NADH dehydrogenase activity of processing tissue through a variety of dehydrating agents and embedding in three different acrylic resins were evaluated. The optimal procedure to maintain NADH dehydrogenase activity used a short (3-hr) fixation in 1% paraformaldehyde solution, followed by dehydration in acetone and embedding in glycol methacrylate resin. Embedding of tissue in resin combined preservation and accurate localization of NADH dehydrogenase activity with good tissue morphology. Blocks of the resin-embedded tissue could be stored at room temperature for at least 6 months without loss of NADH dehydrogenase activity.     

Use of a facemask to protect the intra-oral area in cynomolgus monkeys

A custom fiberglass facemask was designed for cynomolgus monkeys to protect an orthodontic appliance. The mask was constructed from impressions and models made of the animal's head. It prevented the fingers from entering the mouth to dislodge the intra-oral appliances. The facemask permitted normal physical activity, eating, and drinking.     

Use of resin‐bonded extracoronal attachments with removable partial denture: case report

doi:10.1111/j.1741‐2358.2009.00298.x
Use of resin‐bonded extracoronal attachments with removable partial denture: case report Introduction: Resin‐bonded extracoronal attachments may be indicated for the abutment teeth of removable partial dentures, especially for anterior teeth when a cingulum rest must be provided. This type of treatment has a series of advantages such as minimal tooth reduction, supragingival margins, favourable stress distribution, and improved aesthetic appearance. Objective: To report a clinical case of oral rehabilitation using a combination of resin‐bonded extracoronal attachments joined by a Dolder bar with a removable partial denture. Case report: A 60‐year‐old male patient with only the canines in the maxillary arch was restored with a combination of resin‐bonded extracoronal attachments joined by a Dolder bar and a removable partial denture. Conclusion: Dentures with resin‐bonded extracoronal attachments can have a number of advantages over traditional clasp‐retained removable partial dentures.     

A biomechanical analysis of deformation and strain on lower jaw model

Forces, occurring as result of orthodontic appliances, present a guiding system which controls force activity during the growth and development of lower jaw. By qualitative photoelasticimetric analysis author decided to evaluate the influence of extension apparatus to the lower jaw. The concentration and stress distribution, intensity and force direction on contacts with insert (extensor device) were analysed on araldyte lower jaw models. Three different loadings 41.0, 57.4 and 73.8 N under four different loading conditions with and without the correction appliance were used. The results of investigation indicated that the force created by the orthodontic appliance is correct at the beginning. The change from surface contact to linear and punctual contact increased the static moment and local stress, resulting in new regional conditions.     

Novel aqueous oil‐in‐water emulsions containing extracts of natural coniferous resins are strongly antimicrobial against enterobacteria,staphylococci and yeasts,as well as on bacterial biofilms

Aims

The aim of this study was to examine the antimicrobial properties of novel aqueous natural rapeseed oil/saline emulsions containing different soluble components of spruce resin.

Methods and Results

The composition of aqueous resin emulsions was analysed by GC‐MS and their antimicrobial properties were studied with challenge tests and with turbidometric assays. The emulsions were strongly antimicrobial against common Gram‐positive and Gram‐negative bacteria (including MRSA) as well as common yeasts. Furthermore, they inhibited the biofilm formation and eradicated the microbial biofilms on tested microbes. Characteristic for the emulsions was the presence of oxidized resin acids. Other main components present in emulsions, such as lignans and coumaric acids, were not antimicrobial, when tested separately.

Conclusions

The results indicated that the oxidized resin acids were the antimicrobial components in the emulsions. Also, there appears to be a stoichiometric relationship between the number of resin acid molecules and the number microbe cells in the antimicrobial action.

Significance and Impact of the Study

The fact that these solutions do not contain abietic acid, which is the main allergenic compound in resins, suggests that these solutions would be suitable, well‐tolerated antimicrobials for various medical applications. The aqueous formulation will also allow the expansion of the use of these emulsions in from medical applications to the food preservatives and disinfectants.     

Effects of the peracetic acid and sodium hypochlorite on the colour stability and surface roughness of the denture base acrylic resins polymerised by microwave and water bath methods

Objective: This study evaluated the surface roughness (Ra) and color stability of acrylic resin colors (Lucitone 550, QC‐20 and Vipi‐Wave) used for fabricating bases for complete, removable dentures, overdentures and prosthetic protocol after immersion in chemical disinfectants (1% sodium hypochlorite and 2% peracetic acid) for 30 and 60 minutes. Material and Methods: Sixty specimens were made of each commercial brand of resin composite, and divided into 2 groups according to the chemical disinfectants. Specimens had undergone the finishing and polishing procedures, the initial color and roughness measurements were taken (t=0), and after this, ten test specimens of each commercial brand of resin composite were immersed in sodium hypochlorite and ten in peracetic acid, for 30 and 60 minutes, with measurements being taken after each immersion period. These data were submitted to statistical analysis. Results: There was evidence of an increase in Ra after 30 minutes immersion in the disinfectants in all the resins, with QC‐20 presenting the highest Ra values, and Vipi‐Wave the lowest. After 60 minutes immersion in the disinfectants all the resins presented statistically significant color alteration. Conclusions: Disinfection with 1% sodium hypochlorite and peracetic acid altered the properties of roughness and color of the resins.     

Antibacterial mechanisms of GN-2 derived peptides and peptoids against Escherichia coli

Escherichia coli is the main etiological agent of urinary trait infections, able to form biofilms in indwelling devices, resulting in chronic infections which are refractory to antibiotics treatment. In this study, we investigated the antimicrobial and anti-biofilm properties exerted against E. coli ATCC 25922, by a set of peptoids and peptides modeled upon the peptide GN-2, previously reported as a valid antimicrobial agent. The putative antimicrobials were designed to evaluate the effect of cationicity, hydrophobicity and their partitioning on the overall properties against planktonic cells and biofilms as well as on LPS binding, permeabilization of Gram-negative bacteria membranes and hemolysis. The data demonstrated that peptides are stronger antimicrobials than the analogue peptoids which in return have superior anti-biofilm properties. In this study, we present evidence that peptides antimicrobial activity correlates with enhanced LPS binding and hydrophobicity but is not affected by partitioning. The data demonstrated that the enhanced anti-biofilm properties of the peptoids are associated with decreased hydrophobicity and increased penetration of the inner membrane, compared to that of their peptide counterpart, suggesting that the characteristic flexibility of peptoids or their lack of H-bonding donors in their backbone, would play a role in their ability to penetrate bacterial membranes.     

Screening of fixed prosthodontic dentures after five years of use in relation to material and construction

The aim of this study was to screen patients with fixed prosthodontic appliances that were in oral cavity for a period of 5 years or more and to assess clinically and radiologically root caries, gingival recession, pocket formation, alveolar ridge resorption, as well as gingival (GI) and plaque index (PI). The aim also was to find out the differences between materials and constructions, between abutment and non-abutment teeth, and to find out the need for replacement. A total of 260 patients and their orthopantomograms were examined, with a total of 2,265 teeth, 610 being bridge abutments and 246 being crowns. The most frequent were metal+ acrylic veneer crowns or bridges. Root caries was found under the abutments in 10-20%; however abutments with ceramic crowns had the lowest percentage of caries (p < 0.01). Alveolar ridge resorption, pocket formation deeper than 3 mm and gingival recession of various degree was found in 50% of the cases, again with the lowest percentage of ceramic-fused-to-metal appliances (p < 0.01). Pocket depth was registered in significantly higher percentage in metal-acrylic veneer appliances compared to natural teeth (p < 0.01), while there was no significant difference between metal-ceramic appliances and natural teeth (p > 0.05). Although the worst findings were recorded for metal- + acrylic veneer crowns for PI, no significant difference existed between crowns of different material or non-abutment teeth (p > 0.05). There was statistically significant difference between abutments with metal + acrylic veneer crowns, full metal crowns, metal ceramic crowns and non-abutments for GI scores. Higher percentage of scores 0 and 1 was recorded for metal ceramic crowns and non-abutments and significantly higher percentage of scores 2 and 3 was recorded for metal + acrylic veneer crowns and full metallic crowns. Almost 50% of metal-ceramic abutments had no pathologic findings. Almost 30% of the patients needed replacement, or even some abutments to be extracted and therefore a new prosthodontic appliance.     

The study of adhesion of Candida albicans to the selected acrylic resins

The study has been performed on 3 acrylic resins used to fabricate removable dentures. Aim of the study was to detect possible differences in Candida albicans' adhesion within particular materials. Polished and non-polished samples were made, than these samples were sunk in precipitates containing Candida albicans material. Adhesion of Candida albicans to the surface of the materials occured within a concentration of 10. After 24 hours of incubation differences were found concerning the number of the plate cultures. Most of all plate cultures were observed on Lucitone 199, fewer on Zhermacryl, the poorest one was found on Palaxpress resin. Considerable number of plate cultures occured on non-polished samples relating to polished ones. After 48 hours of incubation further development of Candida albicans took place, with differences concerning various materials.     

Evaluation of Vickers hardness of different types of acrylic denture base resins with and without glass fibre reinforcement

doi: 10.1111/j.1741‐2358.2010.00435.x
Evaluation of Vickers hardness of different types of acrylic denture base resins with and without glass fibre reinforcement Objective: To evaluate the Vickers hardness of different acrylic resins for denture bases with and without the addition of glass fibres. Background: It has been suggested that different polymerisation methods, as well as the addition of glass fibre (FV) might improve the hardness of acrylic. Materials and methods: Five types of acrylic resin were tested: Vipi Wave (VW), microwave polymerisation; Vipi Flash (VF), auto‐polymerisation; Lucitone (LT), QC20 (QC) and Vipi Cril (VC), conventional heat‐polymerisation, all with or without glass fibre reinforcement (GFR) and distributed into 10 groups (n = 12). Specimens were then submitted to Vickers hardness testing with a 25‐g load for 30 s. All data were submitted to anova and Tukey’s HSD test. Results: A significant statistical difference was observed with regard to the polymerisation method and the GFR (p < 0.05). Without the GFR, the acrylic resin VC presented the highest hardness values, and VF and LT presented the lowest. In the presence of GFR, VC resin still presented the highest Vickers hardness values, and VF and QC presented the lowest. Conclusions: The acrylic resin VC and VW presented higher hardness values than VF and QC resins. Moreover, GFR increased the Vickers hardness of resins VW, VC and LT.     

Virulence and pathogenicity of Candida albicans is enhanced in biofilms containing oral bacteria

This study examined the influence of bacteria on the virulence and pathogenicity of candidal biofilms. Mature biofilms (Candida albicans-only, bacteria-only, C. albicans with bacteria) were generated on acrylic and either analysed directly, or used to infect a reconstituted human oral epithelium (RHOE). Analyses included Candida hyphae enumeration and assessment of Candida virulence gene expression. Lactate dehydrogenase (LDH) activity and Candida tissue invasion following biofilm infection of the RHOE were also measured. Candida hyphae were more prevalent (p < 0.05) in acrylic biofilms also containing bacteria, with genes encoding secreted aspartyl-proteinases (SAP4/SAP6) and hyphal-wall protein (HWP1) up-regulated (p < 0.05). Candida adhesin genes (ALS3/EPA1), SAP6 and HWP1 were up-regulated in mixed-species biofilm infections of RHOE. Multi-species infections exhibited higher hyphal proportions (p < 0.05), up-regulation of IL-18, higher LDH activity and tissue invasion. As the presence of bacteria in acrylic biofilms promoted Candida virulence, consideration should be given to the bacterial component when managing denture biofilm associated candidoses.     

Viscoelastic properties of Staphylococcus aureus and Staphylococcus epidermidis mono‐microbial biofilms

The viscoelastic properties of mono‐microbial biofilms produced by ocular and reference staphylococcal strains were investigated. The microorganisms were characterized for their haemolytic activity and agr typing and the biofilms, grown on stainless steel surface under static conditions, were analysed by Confocal Laser Scanning Microscopy. Static and dynamic rheometric tests were carried out to determine the steady‐flow viscosity and the elastic and viscous moduli. The analysed biofilms showed the typical time‐dependent behaviour of viscoelastic materials with considerable elasticity and mechanical stability except for Staphylococcus aureus ATCC 29213 biofilm which showed a very fragile structure. In particular, S. aureus 6ME biofilm was more compact than other staphylococcal biofilms studied with a yield stress ranging between 2 and 3 Pa. The data obtained in this work could represent a starting point for developing new therapeutic strategies against biofilm‐associated infections, such as improving the drug effect by associating an antimicrobial agent with a biofilm viscoelasticity modifier.