Nanostructured metal coatings on polymers increase osteoblast attachment

Bioactive coatings are in high demand to increase the functions of cells for numerous medical devices. The objective of this in vitro study was to characterize osteoblast (bone-forming cell) adhesion on several potential orthopedic polymeric materials (specifically, polyetheretherketone, ultra-high molecular weight polyethylene, and polytetrafluoroethylene) coated with either titanium or gold using a novel Ionic Plasma Deposition process which creates a surface-engineered nanostructure (with features below 100 nm). Results demonstrated that compared to currently-used titanium and uncoated polymers, polymers coated with either titanium or gold using Ionic Plasma Deposition significantly increased osteoblast adhesion. Qualitative cell morphology results supported quantitative adhesion results as increased osteoblast cell spreading was observed on coated polymers compared to uncoated polymers. In this manner, this in vitro study strongly suggests that Ionic Plasma Deposition should be further studied for creating nanometer surface features on a wide variety of materials to enhance osteoblast functions necessary for orthopedic applications.     

Potential mechanisms for the effects of tea extracts on the attachment,biofilm formation and cell size of Streptococcus mutans

Tea can inhibit the attachment of Streptococcus mutans to surfaces and subsequent biofilm formation. Five commercial tea extracts were screened for their ability to inhibit attachment and biofilm formation by two strains of S. mutans on glass and hydroxyapatite surfaces. The mechanisms of these effects were investigated using scanning electron microscopy (SEM) and phytochemical screening. The results indicated that extracts of oolong tea most effectively inhibited attachment and extracts of pu-erh tea most effectively inhibited biofilm formation. SEM images showed that the S. mutans cells treated with extracts of oolong tea, or grown in medium containing extracts of pu-erh tea, were coated with tea components and were larger with more rounded shapes. The coatings on the cells consisted of flavonoids, tannins and indolic compounds. The ratio of tannins to simple phenolics in each of the coating samples was ～3:1. This study suggests potential mechanisms by which tea components may inhibit the attachment and subsequent biofilm formation of S. mutans on tooth surfaces, such as modification of cell surface properties and blocking of the activity of proteins and the structures used by the bacteria to interact with surfaces.     

Improvisation and Evaluation of Laterosporulin Coated Titanium Surfaces for dental Applications: An In Vitro Investigation

Despite recent improvement in implant survival rates, there remains a significant demand for enhancing the long-term clinical efficacy of titanium (Ti) implants, particularly for the prevention of peri-implantitis. Bioactive substances such as antimicrobial peptides are emerging as effective alternatives for contemporary antimicrobial agents used in dental health care. Current research work was focused to use laterosporulins that are non-haemolytic cationic antimicrobial peptides from Brevibacillus spp. for coating commercially available Ti discs. The coated Ti surfaces were evaluated in vitro for biofilm formation by two dental plaque isolates Streptococcus gordonii strain DIGK25 and S. mutans strain DIGK119 as representatives of commensal and pathogenic streptococci respectively. The biofilm inhibition was ascertained with replicated experiments on hydroxyapatite discs and confirmed by florescence microscopy. The laterosporulin coated Ti discs showed significantly reduced biofilm formation by oral streptococci and displayed promising potential to enhance the antibacterial surface properties. Such improvised Ti surfaces may curb the menace of oral streptococcal biofilm formation on dental implants and the associated implant failures.     

Bone Loss at Implant with Titanium Abutments Coated by Soda Lime Glass Containing Silver Nanoparticles: A Histological Study in the Dog

The aim of the present study was to evaluate bone loss at implants connected to abutments coated with a soda-lime glass containing silver nanoparticles, subjected to experimental peri-implantitis. Also the aging and erosion of the coating in mouth was studied. Five beagle dogs were used in the experiments. Three implants were placed in each mandible quadrant: in 2 of them, Glass/n-Ag coated abutments were connected to implant platform, 1 was covered with a Ti-mechanized abutment. Experimental peri-implantitis was induced in all implants after the submarginal placement of cotton ligatures, and three months after animals were euthanatized. Thickness and morphology of coating was studied in abutment cross-sections by SEM. Histology and histo-morphometric studies were carried on in undecalfied ground slides. After the induced peri-implantitis: 1.The abutment coating shown losing of thickness and cracking. 2. The histometry showed a significant less bone loss in the implants with glass/n-Ag coated abutments. A more symmetric cone of bone resorption was observed in the coated group. There were no significant differences in the peri-implantitis histological characteristics between both groups of implants. Within the limits of this in-vivo study, it could be affirmed that abutments coated with biocide soda-lime-glass-silver nanoparticles can reduce bone loss in experimental peri-implantitis. This achievement makes this coating a suggestive material to control peri-implantitis development and progression.     

A method for the chemical treatment of cells for the purpose of the subsequent study of the same cell culture preparation by light, scanning and transmission electron microscopy]

Cells cultured on transparent conductive substrates (glass coated with indium oxide) were fixed with aldehyde and osmium tetroxide and then treated with tannic acid, uranyl acetate and lead citrate. The same cell culture preparation could be sequentially studied by light microscopy (in water immersed condition), SEM (after dehydration and critical point drying) and TEM (after embedding in an epoxy resin). This method ensures the preservation of intact cell morphology, cell surface topography and intracellular structures. The treatments used render the cells conductivity and permit to carry out successfully SEM of uncoated cells cultured on conductive substrates. This method also provides a higher contrast of TEM images.     

Tissue Plasminogen Activator Coating on Implant Surfaces Reduces Staphylococcus aureus Biofilm Formation

Staphylococcus aureus biofilm infections of indwelling medical devices are a major medical challenge because of their high prevalence and antibiotic resistance. As fibrin plays an important role in S. aureus biofilm formation, we hypothesize that coating of the implant surface with fibrinolytic agents can be used as a new method of antibiofilm prophylaxis. The effect of tissue plasminogen activator (tPA) coating on S. aureus biofilm formation was tested with in vitro microplate biofilm assays and an in vivo mouse model of biofilm infection. tPA coating efficiently inhibited biofilm formation by various S. aureus strains. The effect was dependent on plasminogen activation by tPA, leading to subsequent local fibrin cleavage. A tPA coating on implant surfaces prevented both early adhesion and later biomass accumulation. Furthermore, tPA coating increased the susceptibility of biofilm infections to antibiotics. In vivo, significantly fewer bacteria were detected on the surfaces of implants coated with tPA than on control implants from mice treated with cloxacillin. Fibrinolytic coatings (e.g., with tPA) reduce S. aureus biofilm formation both in vitro and in vivo, suggesting a novel way to prevent bacterial biofilm infections of indwelling medical devices.     

Biomaterials for orthopedics: anti-biofilm activity of a new bioactive glass coating on titanium implants

Abstract

This study evaluated adhesion and biofilm formation by Candida albicans, Pseudomonas aeruginosa and Staphylococcus epidermidis on surfaces of titanium (Ti) and titanium coated with F18 Bioactive Glass (BGF18). Biofilms were grown and the areas coated with biofilm were determined after 2, 4 and 8?h. Microscopy techniques were applied in order to visualize the structure of the mature biofilm and the extracellular matrix. On the BGF18 specimens, there was less biofilm formation by C. albicans and S. epidermidis after incubation for 8?h. For P. aeruginosa biofilm, a reduction was observed after incubation for 4?h, and it remained reduced after 8?h on BGF18 specimens. All biofilm matrices seemed to be thicker on BGF18 surface than on titanium surfaces. BGF18 showed significant anti-biofilm activity in comparison with Ti in the initial periods of biofilm formation; however, there was extensive biofilm after incubation for 48?h.     

The Effect of Brominated Furanones on The Formation of Staphylococcus aureus Biofilm on PVC

To study the influence of brominated furanones on the formation of Staphylococcus aureus (SA) biofilm on PVC thus providing new avenues of research on the surface modification of materials and clinical treatment of biomaterial-centered infection. Three brominated furanones (furanone-1, furanone-2, and furanone-3) were coated on the surface of PVC material. Both the modified PVC materials and SA were co-cultivated together. To assess the thickness of bacterial biofilm and bacterium colony unit area on PVC materials, confocal laser scanning microscopy and scanning electron microscopy (SEM) were used to observe the surface structure of SA biofilm formation. All treatments were compared with the control group which was not coated with furanones. PVC materials coated with furanone-1 had an increase in bacterial biofilm as well as SA colony area when compared with control. However, there was no significant difference between treating with furanone-1 and furanone-3 (P > 0.05). The impact of different brominated furanones on SA biofilm formation on the surface of PVC materials is different, furanone-1 can promote the SA biofilm formation on the surface of PVC material.     

The impact of recombinant fusion-hydrophobin coated surfaces on E. coli and natural mixed culture biofilm formation

The impact of increased surface hydrophobicity on biofilms regarding retardation, repulsion, or attraction was studied with hydrophobin modified glass substrata. Recombinantly produced fungal hydrophobins forming self-assembled monolayers were used as the surface coating. The adsorption dynamics of hydrophobins were analysed with a quartz crystal microbalance which showed the surface coating to be rapid and stable. The change of surface wettability was determined by water contact angle measurements and demonstrated an increase in hydrophobicity in range of 60-62°. The homogeneity of the monolayers was demonstrated by immunofluorescence microscopy. Atomic force microscopy was applied to visualise the uniform texture of the coated materials. The hydrophobin coatings had no impact on different biofilms in terms of spatial distribution, cell numbers, and population composition. In consequence, hydrophobicity might not represent an important parameter for biofilm formation. Nevertheless, recombinant hydrophobins are suitable for large scale surface modification and functionalization with bioactive molecules.     

Relationship between thigmotropism and Candida biofilm formation in vitro

The biofilm formation of the oral fungal pathogen Candida on denture acrylic strips coated with saliva or serum was examined in relation to the ability to induce hyphae by thigmotropic reaction, using C. albicans (4 isolates), C. glabrata (3 isolates) and C. tropicalis (3 isolates). Both the degree of biofilm formation and the amount of hyphae exhibiting thigmotropism varied depending upon both the species and strains of Candida. Although there was no significant correlation between the amount of hyphae induced by thigmotropic reaction of fungal isolates and biofilm formation on uncoated control specimens (r = 0.577; p < 0.05), the ability of hyphae induced by thigmotropic reaction significantly correlated with the amount of both saliva- and serum-admixed biofilms (r = 0.734; p < 0.05 and r = 0.793; p < 0.01, respectively). Taken together our in vitro data suggested that the hyphal induction by thigmotropic reaction is of importance in candidal biofilm formation on saliva- or serum-coated acrylic surfaces. This revised version was published online in August 2006 with corrections to the Cover Date.     

一株工业腐败物中魏氏柠檬酸杆菌的分离鉴定及产生物膜特性分析

【目的】分离和鉴定工业腐败物中高产细菌生物膜菌株,并明确该菌的部分产膜特性。【方法】通过微孔板结晶紫染色法对分离的菌株进行产膜能力评价,根据菌落形态、生理生化特性和16S rRNA序列的系统进化树分析进行菌株鉴定;同时利用扫描电子显微镜(SEM)和结晶紫染色法分别研究材料及温度对该菌产膜特性和能力的影响。【结果】筛选出一株高产细菌生物膜菌株,经鉴定该菌为魏氏柠檬酸杆菌;其在玻璃、不锈钢和聚氯乙烯(PVC)材料表面均能形成生物膜;温度条件显著影响产膜能力,在30°C时,菌株在PVC材料表面形成生物膜能力最强。【结论】工业腐败物中含有高产细菌生物膜菌株,并且产膜受附着物和温度影响。     

Antimicrobial Efficacy of Surface-Coated External Fixation Pins

In clinical applications, colonization of metal implants by adhesive and biofilm-forming bacteria not only prolong healing but create additional healthcare costs for implant revision and antimicrobial treatment. An in vitro assay was established investigating the antimicrobial surface activity of external fixation pins intended for use in bone fractures and deformities. Test articles made out of stainless steel and coated with a polymer-containing nanoparticulate silver were compared to non-coated reference controls out of stainless steel, copper and titanium. Staphylococcus epidermidis, known as a predominant cause for implant-related infections was used as test organism. Test pins and bacteria were incubated for a period of 20 h found to be sufficient for initiating biofilm formation. After removing non- and low-adherent bacteria by rinsing, two methods were used to isolate high-adherent (sessile) bacteria from the implant surfaces. Besides shaking the implants in a solution containing small glass beads, a cytobrush technique was used to mechanically harvest viable bacteria. Finally, the amount of detached bacteria was determined by plate counts. Several parameters identified to be critical within the different removal procedures such as the inoculum concentration and the shaking time in the presence of glass beads as well as time of the cytobrush treatment were analysed. The final test scheme resulted in the use of an inoculum of 10⁵ colony forming units (CFU) per millilitre, ten rinsing steps for the removal of low adherent bacteria and 5 min of shaking in the presence of glass beads, detaching the high-adherent bacteria. Due to subjective variations impacting the outcome of the procedure, the cytobrush technique was not favoured and finally rejected. Using the in vitro assay developed, it could be demonstrated that fixation pins coated with silver show a 3 log step reduction in the number of biofilm-forming bacteria compared to a non-coated stainless steel or titanium implant. Pins made out of copper showed the highest antimicrobial efficacy, as the number of detached bacteria was found to be below the detection limit, they served as a positive control within this test.     

Characterization of biofilm formation by clinically relevant serotypes of group A streptococci

Streptococcus pyogenes (group A streptococcus [GAS]) is a frequent cause of purulent infections in humans. As potentially important aspects of its pathogenicity, GAS was recently shown to aggregate, form intratissue microcolonies, and potentially participate in multispecies biofilms. In this study, we show that GAS in fact forms monospecies biofilms in vitro, and we analyze the basic parameters of S. pyogenes in vitro biofilm formation, using Streptococcus epidermidis as a biofilm-positive control. Of nine clinically important serotype strains, M2, M6, M14, and M18 were found to significantly adhere to coated and uncoated polystyrene surfaces. Fibronectin and collagen types I and IV best supported primary adherence of serotype M2 and M18 strains, respectively, whereas serotype M6 and M14 strains strongly bound to uncoated polystyrene surfaces. Absorption measurements of safranin staining, as well as electron scanning and confocal laser scanning microscopy, documented that primary adherence led to subsequent formation of three-dimensional biofilm structures consisting of up to 46 bacterial layers. Of note, GAS isolates belonging to the same serotype were found to be very heterogeneous in their biofilm-forming behavior. Biofilm formation was equally efficient under static and continuous flow conditions and consisted of the classical three steps, including partial disintegration after long-term incubation. Activity of the SilC signaling peptide as a component of a putative quorum-sensing system was found to influence the biofilm structure and density of serotype M14 and M18 strains. Based on the presented methods and results, standardized analyses of GAS biofilms and their impact on GAS pathogenicity are now feasible.     

The effects of surface roughness and type of denture acrylic on biofilm formation by Streptococcus oralis in a constant depth film fermentor

AIMS: To investigate the effects of surface roughness and type of denture acrylic on the early development of a Streptococcus oralis biofilm in a constant depth film fermentor (CDFF). METHODS AND RESULTS: Streptococcus oralis was incubated with acrylic of known surface roughness in the CDFF. Adherent Strep. oralis were enumerated by viable counting. Cold-cure acrylic was rougher (P < 0.01) than heat-cure acrylic after polishing with abrasive paper of any given grit-grade. Heat-cure acrylic was colonized by fewer (P < 0.001) bacteria than cold-cure acrylic at any given surface roughness. The number of bacteria adhering to heat-cure and cold-cure acrylic increased linearly with mean surface roughness after 2 h incubation, the increase being greater (P < 0.001) for the cold-cure compared with the heat-cure acrylic. However, after 4 h incubation, surface roughness appeared to have no effect on the number of adherent bacteria. CONCLUSION: The type of acrylic used, and its roughness, affect the early stages of biofilm formation by Strep. oralis. SIGNIFICANCE AND IMPACT OF THE STUDY: Choosing an appropriate type of smooth acrylic could lead to reduced biofilm formation in vivo.     

Heat and radiofrequency plasma glow discharge pretreatment of a titanium alloy: Eveidence for enhanced osteoinductive properties

It is believed that orthopedic and implant longevity can be improved by optimizing fixation, or direct bone‐implant contact, through the stimulation of new bone formation around the implant. The purpose of this study was to determine whether heat (600°C) or radiofrequency plasma glow discharge (RFGD) pretreatment of Ti6Al4V stimulated calcium‐phosphate mineral formation in cultures of attached MC3T3 osteoprogenitor cells with or without a fibronectin coating. Calcium‐phosphate mineral was analyzed by flame atomic absorption spectrophotometry, scanning electron microscopy (SEM)/electron dispersive X‐ray microanalysis (EDAX) and Fourier transformed infrared spectroscopy (FTIR). RFGD and heat pretreatments produced a general pattern of increased total soluble calcium levels, although the effect of heat pretreatment was greater than that of RFGD. SEM/EDAX showed the presence of calcium‐and phosphorus‐containing particles on untreated and treated disks that were more numerous on fibronectin‐coated disks. These particles were observed earliest (1 week) on RFGD‐pretreated surfaces. FTIR analyses showed that the heat pretreatment produced a general pattern of increased levels of apatite mineral at 2–4 weeks; a greater effect was observed for fibronectin‐coated disks compared to uncoated disks. The observed findings suggest that heat pretreatment of Ti6Al4V increased the total mass of the mineral formed in MC3T3 osteoprogenitor cell cultures more than RFGD while the latter pretreatment hastened the early deposition of mineral. These findings help to support the hypothesis that the pretreatments enhance the osteoinductive properties of the alloy. J. Cell. Biochem. 114: 1917–1927, 2013. © 2013 Wiley Periodicals, Inc.     

A novel non line-of-sight method for coating hydroxyapatite onto the surfaces of support materials by biomineralization

A novel method is described for the non line-of-sight coating of hydroxyapatite onto polyurethane reticulated foam and titanium discs. This utilises a biofilm of Serratia sp. NCIMB 40259 which, when challenged with a solution containing calcium chloride and phosphatase substrate, manufactures biofilm-bound material identified as hydroxyapatite by X-ray powder diffraction analysis. Non-invasive magnetic resonance imaging was used to visualize the biofilm coating throughout the foam labyrinth and to measure the thickness of the film within reticulated foam cubes in situ. The film developed within the cube matrices was similar to that measured on the surface of a glass slide. Using LaPO(4) deposition as a model system the metallised biofilm was visualised in two-dimensional slices throughout three-dimensional images acquired by magnetic resonance imaging. A similar encrustation of hydroxyapatite on the surface of biofilm grown on titanium discs was confirmed by scanning electron microscopy. Potential applications for bio-hydroxyapatite as possible bone implant precursors are discussed.     

Antibacterial isoeugenol coating on stainless steel and polyethylene surfaces prevents biofilm growth

Aims

Pathogenic bacteria can spread between individuals or between food items via the surfaces they share. Limiting the survival of pathogens on surfaces, therefore, presents an opportunity to limit at least one route of how pathogens spread. In this study, we propose that a simple coating with the essential oil isoeugenol can be used to circumvent the problem of bacterial transfer via surfaces.

Methods and Results

Two commonly used materials, stainless steel and polyethylene, were coated by physical adsorption, and the coatings were characterized by Raman spectroscopy, atomic force microscopy and water contact angle measurements. We quantified and visualized the colonization of coated and uncoated surfaces by three bacteria: Staphylococcus aureus, Listeria monocytogenes and Pseudomonas fluorescens. No viable cells were detected on surfaces coated with isoeugenol.

Conclusions

The isoeugenol coating prepared with simple adsorption proved effective in preventing biofilm formation on stainless steel and polyethylene surfaces. The result was caused by the antibacterial effect of isoeugenol, as the coating did not diminish the adhesive properties of the surface.

Significance and Impact of the Study

Our study demonstrates that a simple isoeugenol coating can prevent biofilm formation of S. aureus, L. monocytogenes and P. fluorescens on two commonly used surfaces.     

The impact of recombinant fusion-hydrophobin coated surfaces on E. coli and natural mixed culture biofilm formation

The impact of increased surface hydrophobicity on biofilms regarding retardation, repulsion, or attraction was studied with hydrophobin modified glass substrata. Recombinantly produced fungal hydrophobins forming self-assembled monolayers were used as the surface coating. The adsorption dynamics of hydrophobins were analysed with a quartz crystal microbalance which showed the surface coating to be rapid and stable. The change of surface wettability was determined by water contact angle measurements and demonstrated an increase in hydrophobicity in range of 60–62°. The homogeneity of the monolayers was demonstrated by immunofluorescence microscopy. Atomic force microscopy was applied to visualise the uniform texture of the coated materials. The hydrophobin coatings had no impact on different biofilms in terms of spatial distribution, cell numbers, and population composition. In consequence, hydrophobicity might not represent an important parameter for biofilm formation. Nevertheless, recombinant hydrophobins are suitable for large scale surface modification and functionalization with bioactive molecules.     

Bioactive Titanium Surfaces with the Effect of Inhibiting Biofilm Formation

Titanium metals and its alloy have been widely used in hard tissue repairing fields due to their good biocampatibility and mechanical properties. However, bioinert response and biomaterial associated infections are the main problems for their clinical application. In this study, we chose titanium plates treated with anodic oxidation （AO-Ti）, alkali-heat （AH-Ti） and acid-alkali （AA-Ti） methods, which have been proved to be bioactive in vivo, to culture with Staphylococcus aureus and Escherichia coli to investigate the interaction between bioactive titanium surfaces and biofilm. We used X-ray diffraction （XRD）, Scanning Electron Microscope （SEM）, roughness measurement to study the physical-chemical properties of the as-received bioactive titanium surfaces, and Confocal Laser Scanning Microscope （CLSM） was employed to study the properties of biofilm formed on the biomaterial surfaces. The results indicate that the titanium surface subjected to anodic oxidation treatment is unfavorable for the formation ofbiofilm in vitro because the titania （TiO2） coating formed by anodizing has superior antimicrobial property than the other surfaces. Therefore, anodic oxidation surface modification is effective to endow titanium surface with bioactivity and antimicrobial property, which has the potential to improve the successful rate of the clinical application of titanium implants.     

Adhesion and removal kinetics of Bacillus cereus biofilms on Ni-PTFE modified stainless steel

Biofilm control remains a challenge to food safety. A well-studied non-fouling coating involves codeposition of polytetrafluoroethylene (PTFE) during electroless plating. This coating has been reported to reduce foulant build-up during pasteurization, but opportunities remain in demonstrating its efficacy in inhibiting biofilm formation. Herein, the initial adhesion, biofilm formation, and removal kinetics of Bacillus cereus on Ni-PTFE-modified stainless steel (SS) are characterized. Coatings lowered the surface energy of SS and reduced biofilm formation by > 2 log CFU cm^?2. Characterization of the kinetics of biofilm removal during cleaning demonstrated improved cleanability on the Ni-PTFE coated steel. There was no evidence of biofilm after cleaning by either solution on the Ni-PTFE coated steel, whereas more than 3 log and 1 log CFU cm^?2 of bacteria remained on the native steel after cleaning with water and an alkaline cleaner, respectively. This work demonstrates the potential application of Ni-PTFE non-fouling coatings on SS to improve food safety by reducing biofilm formation and improving the cleaning efficiency of food processing equipment.