Genetic analysis of multi-environmental spring wheat trials identifies genomic regions for locus-specific trade-offs for grain weight and grain number

Key message

GWAS on multi-environment data identified genomic regions associated with trade-offs for grain weight and grain number.

Abstract

Grain yield (GY) can be dissected into its components thousand grain weight (TGW) and grain number (GN), but little has been achieved in assessing the trade-off between them in spring wheat. In the present study, the Wheat Association Mapping Initiative (WAMI) panel of 287 elite spring bread wheat lines was phenotyped for GY, GN, and TGW in ten environments across different wheat growing regions in Mexico, South Asia, and North Africa. The panel genotyped with the 90 K Illumina Infinitum SNP array resulted in 26,814 SNPs for genome-wide association study (GWAS). Statistical analysis of the multi-environmental data for GY, GN, and TGW observed repeatability estimates of 0.76, 0.62, and 0.95, respectively. GWAS on BLUPs of combined environment analysis identified 38 loci associated with the traits. Among them four loci—6A (85 cM), 5A (98 cM), 3B (99 cM), and 2B (96 cM)—were associated with multiple traits. The study identified two loci that showed positive association between GY and TGW, with allelic substitution effects of 4% (GY) and 1.7% (TGW) for 6A locus and 0.2% (GY) and 7.2% (TGW) for 2B locus. The locus in chromosome 6A (79–85 cM) harbored a gene TaGW2-6A. We also identified that a combination of markers associated with GY, TGW, and GN together explained higher variation for GY (32%), than the markers associated with GY alone (27%). The marker-trait associations from the present study can be used for marker-assisted selection (MAS) and to discover the underlying genes for these traits in spring wheat.

     

Interactions between <Emphasis Type="Italic">Glu-1</Emphasis> and <Emphasis Type="Italic">Glu-3</Emphasis> loci and associations of selected molecular markers with quality traits in winter wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) DH lines

The quality of wheat depends on a large complex of genes and environmental factors. The objective of this study was to identify quantitative trait loci controlling technological quality traits and their stability across environments, and to assess the impact of interaction between alleles at loci Glu-1 and Glu-3 on grain quality. DH lines were evaluated in field experiments over a period of 4 years, and genotyped using simple sequence repeat markers. Lines were analysed for grain yield (GY), thousand grain weight (TGW), protein content (PC), starch content (SC), wet gluten content (WG), Zeleny sedimentation value (ZS), alveograph parameter W (APW), hectolitre weight (HW), and grain hardness (GH). A number of QTLs for these traits were identified in all chromosome groups. The Glu-D1 locus influenced TGW, PC, SC, WG, ZS, APW, GH, while locus Glu-B1 affected only PC, ZS, and WG. Most important marker-trait associations were found on chromosomes 1D and 5D. Significant effects of interaction between Glu-1 and Glu-3 loci on technological properties were recorded, and in all types of this interaction positive effects of Glu-D1 locus on grain quality were observed, whereas effects of Glu-B1 locus depended on alleles at Glu-3 loci. Effects of Glu-A3 and Glu-D3 loci per se were not significant, while their interaction with alleles present at other loci encoding HMW and LMW were important. These results indicate that selection of wheat genotypes with predicted good bread-making properties should be based on the allelic composition both in Glu-1 and Glu-3 loci, and confirm the predominant effect of Glu-D1d allele on technological properties of wheat grains.     

Wild-type alleles of Rht-B1 and Rht-D1 as independent determinants of thousand-grain weight and kernel number per spike in wheat

The utilization of dwarfing genes Rht-B1b and Rht-D1b in wheat significantly increased grain yield and contributed to the “green revolution”. However, the benefit of Rht-B1b and Rht-D1b in drought environments has been debated. Although quantitative trait loci (QTL) for kernel number per spike (KN) and thousand-grain weight (TGW) have been found to be associated with Rht-B1 and Rht-D1, the confounding effect of environmental variation has made a direct association difficult to find. In this study, we used a doubled haploid population (225 lines) of Westonia × Kauz, in which both Rht-B1b (Kauz) and Rht-D1b (Westonia) segregated. The purpose of the study was to determine the interaction of Rht-B1 and Rht-D1 with grain yield components, namely KN and TGW, and to investigate genotype-by-environment interactions in glasshouse and field trials conducted in 2010 and 2011 in Western Australia. A genetic map of 1,156 loci was constructed using 195 microsatellite markers, two gene-based markers for Rht-B1 and Rht-D1, and 959 single nucleotide polymorphisms. The major QTL for TGW and KN were strongly linked to Rht-B1 and Rht-D1 loci and the positive effects were associated with the wild-type alleles, Rht-B1a and Rht-D1a. The major QTL of TGW were on chromosome 2D and 4B. The significant genetic effects (14.6–22.9 %) of TGW indicated that marker-assisted selection for TGW is possible, and markers gwm192a (206 bp) or gwm192b (236 bp) can be used as indicators of high TGW. For KN, one major QTL was detected on chromosome 4D in the analysis across three environments. The association of the wild-type alleles Rht-B1a and Rht-D1a in drought environments is discussed.     

Rapid Identification of Major QTLs Associated with Rice Grain Weight and Their Utilization

To uncover the genetics of rice grain weight, we constructed an RIL population derived from a cross between a large grain accession M201 and a small size variety JY293. Specific Locus Amplified Fragment Sequencing (SLAF-Seq) technology was used to genotype two bulked DNA pools made from individual DNA of the heaviest 30 lines and the lightest 30 lines according to the 1000 grain weight (TGW). Bulked segregant analysis (BSA) was used to identify SLAFs strongly associated with TGW. Two marker-intensive regions at 24,600,000–24,850,000 bp and 25,000,000–25,350,000 bp on chromosome 3 were identified tightly related to the TGW. Then a linkage map of chromosome 3 was constructed with SSR markers and some SLAF derived single nucleotide polymorphisms (SNPs). Quantitative trait locus (QTL) mapping for TGW, grain length, grain width, and grain thickness revealed one major QTL in the second hot-region and two other minor QTLs for grain weight. These three QTLs displayed hierarchical effects on grain length and grain weight in order of qTGW3.2 (qGL3) qTGW3.1 (GS3) qTGW3.3. Multiple comparisons of means among the eight combinations of 3 QTLs revealed that the lines with two of three QTLs deriving from M201 displayed a large grain weight phenotype (TGW 40.2g, average data of three years) and lines with both qTGW3.1 and qTGW3.3 alleles from M201 (42.5g) had similar grain weight to the qTGW3.2 (40.8g) alone. Two strategies with similar effectiveness were proposed to improve grain weight by marker-assisted selection (MAS). One is to introduce the novel qTGW3.2 allele alone, and the other is to pyramid qTGW3.1 and qTGW3.3 alleles together. One new allele of GS3 (39 bp deletion in intron 1) and two SNPs in coding sequence of qGL3 identified in this study from M201 are useful in pyramiding elite alleles for molecular breeding for improvement of rice yield.     

Genetic control of grain yield and grain physical characteristics in a bread wheat population grown under a range of environmental conditions

Key message

Genetic analysis of the yield and physical quality of wheat revealed complex genetic control, including strong effects of photoperiod-sensitivity loci.

Abstract

Environmental conditions such as moisture deficit and high temperatures during the growing period affect the grain yield and grain characteristics of bread wheat (Triticum aestivum L.). The aim of this study was to map quantitative trait loci (QTL) for grain yield and grain quality traits using a Drysdale/Gladius bread wheat mapping population grown under a range of environmental conditions in Australia and Mexico. In general, yield and grain quality were reduced in environments exposed to drought and/or heat stress. Despite large effects of known photoperiod-sensitivity loci (Ppd-B1 and Ppd-D1) on crop development, grain yield and grain quality traits, it was possible to detect QTL elsewhere in the genome. Some of these QTL were detected consistently across environments. A locus on chromosome 6A (TaGW2) that is known to be associated with grain development was associated with grain width, thickness and roundness. The grain hardness (Ha) locus on chromosome 5D was associated with particle size index and flour extraction and a region on chromosome 3B was associated with grain width, thickness, thousand grain weight and yield. The genetic control of grain length appeared to be largely independent of the genetic control of the other grain dimensions. As expected, effects on grain yield were detected at loci that also affected yield components. Some QTL displayed QTL-by-environment interactions, with some having effects only in environments subject to water limitation and/or heat stress.     

Effects of Favorable Alleles for Water-Soluble Carbohydrates at Grain Filling on Grain Weight under Drought and Heat Stresses in Wheat

Drought, heat and other abiotic stresses during grain filling can result in reductions in grain weight. Conserved water-soluble carbohydrates (WSC) at early grain filling play an important role in partial compensation of reduced carbon supply. A diverse population of 262 historical winter wheat accessions was used in the present study. There were significant correlations between 1000-grain weight (TGW) and four types of WSC, viz. (1) total WSC at the mid-grain filling stage (14 days after flowering) produced by leaves and non-leaf organs; (2) WSC contributed by current leaf assimilation during the mid-grain filling; (3) WSC in non-leaf organs at the mid-grain filling, excluding the current leaf assimilation; and (4) WSC used for respiration and remobilization during the mid-grain filling. Association and favorable allele analyses of 209 genome-wide SSR markers and the four types of WSC were conducted using a mixed linear model. Seven novel favorable WSC alleles exhibited positive individual contributions to TGW, which were verified under 16 environments. Dosage effects of pyramided favorable WSC alleles and significantly linear correlations between the number of favorable WSC alleles and TGW were observed. Our results suggested that pyramiding more favorable WSC alleles was effective for improving both WSC and grain weight in future wheat breeding programs.     

Relationships between grain protein content and grain yield components through quantitative trait locus analyses in a recombinant inbred line population derived from two elite durum wheat cultivars

Grain protein content (GPC) in durum wheat (Triticum turgidum var. durum) is negatively correlated with grain yield. To evaluate possible genetic interrelationships between GPC and grain yield per spike, thousand-kernel weight and kernel number per spike, quantitative trait loci (QTL) for GPC were mapped using GPC-adjusted data in a covariance analysis on yield components. Phenotypic data were evaluated in a segregating population of 120 recombinant inbred lines derived from crossing the elite cultivars Svevo and Ciccio. The material was tested at five environments in southern Italy. QTL were determined by composite interval mapping based on the Svevo?×?Ciccio linkage map described in Gadaleta et al. (2009) and integrated with DArT markers. The close relationship between GPC and yield components was reflected in the negative correlation between the traits and in the reduction of variance when GPC values were adjusted to yield components. Ten independent genomic regions involved in the expression of GPC were detected, six of which were associated with QTL for one or more grain yield components. QTL alleles with increased GPC effects were associated with QTL alleles with decreased effects on one or more yield component traits, or vice versa (i.e. the allelic effects were in opposite direction). Four QTL for GPC showed always significant effects, and these QTL should represent genes that influence GPC independently from variation in the yield components. Such genes are of special interest in wheat breeding since they would allow an increase in GPC without a concomitant decrease in grain yield.     

High-Density Genetic Linkage Map Construction and QTL Mapping of Grain Shape and Size in the Wheat Population Yanda1817 × Beinong6

High-density genetic linkage maps are necessary for precisely mapping quantitative trait loci (QTLs) controlling grain shape and size in wheat. By applying the Infinium iSelect 9K SNP assay, we have constructed a high-density genetic linkage map with 269 F ₈ recombinant inbred lines (RILs) developed between a Chinese cornerstone wheat breeding parental line Yanda1817 and a high-yielding line Beinong6. The map contains 2431 SNPs and 128 SSR & EST-SSR markers in a total coverage of 3213.2 cM with an average interval of 1.26 cM per marker. Eighty-eight QTLs for thousand-grain weight (TGW), grain length (GL), grain width (GW) and grain thickness (GT) were detected in nine ecological environments (Beijing, Shijiazhuang and Kaifeng) during five years between 2010–2014 by inclusive composite interval mapping (ICIM) (LOD≥2.5). Among which, 17 QTLs for TGW were mapped on chromosomes 1A, 1B, 2A, 2B, 3A, 3B, 3D, 4A, 4D, 5A, 5B and 6B with phenotypic variations ranging from 2.62% to 12.08%. Four stable QTLs for TGW could be detected in five and seven environments, respectively. Thirty-two QTLs for GL were mapped on chromosomes 1B, 1D, 2A, 2B, 2D, 3B, 3D, 4A, 4B, 4D, 5A, 5B, 6B, 7A and 7B, with phenotypic variations ranging from 2.62% to 44.39%. QGl.cau-2A.2 can be detected in all the environments with the largest phenotypic variations, indicating that it is a major and stable QTL. For GW, 12 QTLs were identified with phenotypic variations range from 3.69% to 12.30%. We found 27 QTLs for GT with phenotypic variations ranged from 2.55% to 36.42%. In particular, QTL QGt.cau-5A.1 with phenotypic variations of 6.82–23.59% was detected in all the nine environments. Moreover, pleiotropic effects were detected for several QTL loci responsible for grain shape and size that could serve as target regions for fine mapping and marker assisted selection in wheat breeding programs.     

A novel allele of <Emphasis Type="Italic">TaGW2</Emphasis>-<Emphasis Type="Italic">A1</Emphasis> is located in a finely mapped QTL that increases grain weight but decreases grain number in wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

Key message

A novel TaGW2-A1 allele was identified from a stable, robust QTL region, which is pleiotropic for thousand grain weight, grain number per spike, and grain morphometric parameters in wheat.

Abstract

Thousand grain weight (TGW) and grain number per spike (GNS) are two crucial determinants of wheat spike yield, and genetic dissection of their relationships can help to fine-tune these two components and maximize grain yield. By evaluating 191 recombinant inbred lines in 11 field trials, we identified five genomic regions on chromosomes 1B, 3A, 3B, 5B, or 7A that solely influenced either TGW or GNS, and a further region on chromosome 6A that concurrently affected TGW and GNS. The QTL of interest on chromosome 6A, which was flanked by wsnp_BE490604A_Ta_2_1 and wsnp_RFL_Contig1340_448996 and designated as QTgw/Gns.cau-6A, was finely mapped to a genetic interval shorter than 0.538 cM using near isogenic lines (NILs). The elite NILs of QTgw/Gns.cau-6A increased TGW by 8.33%, but decreased GNS by 3.05% in six field trials. Grain Weight 2 (TaGW2-A1), a well-characterized gene that negatively regulates TGW and grain width in wheat, was located within the finely mapped interval of QTgw/Gns.cau-6A. A novel and rare TaGW2-A1 allele with a 114-bp deletion in the 5′ flanking region was identified in the parent with higher TGW, and it reduced TaGW2-A1 promoter activity and expression. In conclusion, these results expand our knowledge of the genetic and molecular basis of TGW-GNS trade-offs in wheat. The QTLs and the novel TaGW2-A1 allele are likely useful for the development of cultivars with higher TGW and/or higher GNS.

     

Genome-wide association study for agronomic and physiological traits in spring wheat evaluated in a range of heat prone environments

Key message

We identified 27 stable loci associated with agronomic traits in spring wheat using genome-wide association analysis, some of which confirmed previously reported studies. GWAS peaks identified in regions where no QTL for grain yield per se has been mapped to date, provide new opportunities for gene discovery and creation of new cultivars with desirable alleles for improving yield and yield stability in wheat.

Abstract

We undertook large-scale genetic analysis to determine marker-trait associations (MTAs) underlying agronomic and physiological performance in spring wheat using genome-wide association studies (GWAS). Field trials were conducted at seven sites in three countries (Sudan, Egypt, and Syria) over 2–3 years in each country. Twenty-five agronomic and physiological traits were measured on 188 wheat genotypes. After correcting for population structure and relatedness, a total of 245 MTAs distributed over 66 loci were associated with agronomic traits in individual and mean performance across environments respectively; some of which confirmed previously reported loci. Of these, 27 loci were significantly associated with days to heading, thousand kernel weight, grain yield, spike length, and leaf rolling for mean performance across environments. Despite strong QTL by environment interactions, eight of the loci on chromosomes 1A, 1D, 5A, 5D, 6B, 7A, and 7B had pleiotropic effects on days to heading and yield components (TKW, SM^?2, and SNS). The winter-type alleles at the homoeologous VRN1 loci significantly increased days to heading and grain yield in optimal environments, but decreased grain yield in heat prone environments. Top 20 high-yielding genotypes, ranked by additive main effects and multiplicative interaction (AMMI), had low kinship relationship and possessed 4–5 favorable alleles for GY MTAs except two genotypes, Shadi-4 and Qafzah-11/Bashiq-1–2. This indicated different yield stability mechanisms due to potentially favorable rare alleles that are uncharacterized. Our results will enable wheat breeders to effectively introgress several desirable alleles into locally adapted germplasm in developing wheat varieties with high yield stability and enhanced heat tolerance.

     

Identification of Novel SNP in Promoter Sequence of TaGW2-6A Associated with Grain Weight and Other Agronomic Traits in Wheat (Triticum aestivum L.)

TaGW2 is an orthologue of rice gene OsGW2, which encodes E3 RING ubiquitin ligase and controls the grain size in rice. In wheat, three copies of TaGW2 have been identified and mapped on wheat homoeologous group 6 viz. TaGW2-6A, TaGW2-6B and TaGW2-6D. In the present study, using as many as 207 Indian wheat genotypes, we identified four SNPs including two novel SNPs (SNP-988 and SNP-494) in the promoter sequence of TaGW2-6A. All the four SNPs were G/A or A/G substitutions (transitions). Out of the four SNPs, SNP-494 was causal, since it was found associated with grain weight. The mean TGW (41.1 g) of genotypes with the allele SNP-494_A was significantly higher than mean TGW (38.6 g) of genotypes with the allele SNP-494_G. SNP-494 also regulates the expression of TaGW2-6A so that the wheat genotypes with SNP-494_G have higher expression and lower TGW and the genotypes with SNP-494_A have lower expression but higher TGW. Besides, SNP-494 was also found associated with grain length-width ratio, awn length, spike length, grain protein content, peduncle length and plant height. This suggested that gene TaGW2-6A not only controls grain size, but also controls other agronomic traits. In the promoter region, SNP-494 was present in ‘CGCG’ motif that plays an important role in Ca²⁺/calmodulin mediated regulation of genes. A user-friendly CAPS marker was also developed to identify the desirable allele of causal SNP (SNP-494) for use in marker-assisted selection for improvement of grain weight in wheat. Using four SNPs, five haplotypes were identified; of these, Hap_5 (G_A_G_A) was found to be a desirable haplotype having significantly higher grain weight (41.13g) relative to other four haplotypes (36.33-39.16 g).     

Genomic regions for yield and yield parameters in Chinese winter wheat (Triticum aestivum L.) genotypes tested under varying environments correspond to QTL in widely different wheat materials

Field trials with a population of 108 doubled haploid (DH) lines of bread wheat (Triticum aestivum L.) derived from a cross between the Chinese winter wheat cultivars CA9613 and H1488 were carried out at Beijing (China) in 2000/2001 and 2001/2002. In addition, a field trial and a pot experiment were carried out at the experimental field stations of Giessen University (Germany) in the vegetation periods 2004/2005 and 2006/2007. Phenotypic data for major agronomic yield-related traits, i.e. grain weight per ear (GWE), grain number per ear (GNE), plant height and thousand-grain weight (TGW), were recorded in all experiments. In addition, biomass weight per tiller and ear weight were evaluated in the two field trials at Beijing. Based on the phenotypic data and a genetic map comprising 168 SSR markers, an analysis of quantitative trait loci (QTL) was carried out for yield and yield parameters using the composite interval mapping (CIM) approach. A total of 30 QTL were detected for these traits across four environments. Five of these QTL located on chromosomes 1A, 1B, 2B, 2D and 7D exhibited pleiotropic effects. Such pleiotropic gene loci will be very useful for understanding the homologous/homeologous relationships among QTL and designing an appropriate marker-assisted breeding programme including multi-trait selection in order to accumulate (“pyramide”) favorable alleles at different genetic loci.     

Chromosomal location of a <Emphasis Type="Italic">Triticum dicoccoides</Emphasis>-derived powdery mildew resistance gene in common wheat by using microsatellite markers

The powdery mildew resistance has been transferred from an Israeli wild emmer (Triticum dicoccoides) accession "G-305-M" into common wheat by crossing and backcrossing (G-305-M/781//Jing 411*3). Genetic analysis showed that the resistance was controlled by a single dominant gene at the seedling stage. Among the 102 pairs of SSR primers tested, four polymorphic microsatellite markers (Xpsp3029, Xpsp3071, Xpsp3152 and Xgwm570) from the long arm of chromosome 6A were mapped in a BC(2)F(3) population segregating for powdery mildew resistance and consisting of 167 plants. The genetic distances between the resistance gene and these four markers were: 0.6 cM to Xpsp3029, 3.1 cM to Xpsp3071, 11.2 cM to Xpsp3152 and 20.4 cM to Xgwm570, respectively. The order of these microsatellite loci agreed well with the established microsatellite map of chromosome arm 6AL. We concluded that the resistance gene was located on the long arm of chromosome 6AL. Based on the origin and chromosomal location of the gene, it is suggested that the resistance gene derived from "G-305-M" is a novel powdery mildew resistance gene and is temporarily designated MlG.     

Cloning of <Emphasis Type="Italic">TaTPP-6AL1</Emphasis> associated with grain weight in bread wheat and development of functional marker

Trehalose 6-phosphate phosphatase (TPP) dephosphorylates trehalose 6-phosphate to trehalose, an important growth regulator, and is involved in starch accumulation and grain yield. In this study, wheat TPP homologs were isolated from chromosomes 6AL, 6BL, and 6DL, designated as TaTPP-6AL1, TaTPP-6BL1, and TaTPP-6DL1, respectively. Sequence alignment showed a single-nucleotide polymorphism (SNP) at TaTPP-6AL1 locus between cultivars with contrasting thousand grain weight (TGW), forming alleles TaTPP-6AL1a and TaTPP-6AL1b, respectively. A cleaved amplified polymorphic sequence (CAPS) marker, TaTPP-6AL1-CAPS, was developed to differentiate the two alleles. TaTPP-6AL1 was mapped within the interval of IWB65749 and IWB60449 in a recombinant inbred line (RIL) population derived from Zhou8425B/Chinese Spring using the wheat 90K SNP assay. A QTL for TGW identified in the interval explained 12.1–19.1% of the phenotypic variance across five environments. Association analysis on 141 Chinese wheat cultivars also indicated a significant correlation of TaTPP-6AL1 with TGW. In conclusion, TaTPP-6AL1 and its functional marker are valuable to improve grain yield in wheat breeding.     

Genetic insight into yield-associated traits of wheat grown in multiple rain-fed environments

Background

Grain yield is a key economic driver of successful wheat production. Due to its complex nature, little is known regarding its genetic control. The goal of this study was to identify important quantitative trait loci (QTL) directly and indirectly affecting grain yield using doubled haploid lines derived from a cross between Hanxuan 10 and Lumai 14.

Methodology/Principal Findings

Ten yield-associated traits, including yield per plant (YP), number of spikes per plant (NSP), number of grains per spike (NGS), one-thousand grain weight (TGW), total number of spikelets per spike (TNSS), number of sterile spikelets per spike (NSSS), proportion of fertile spikelets per spike (PFSS), spike length (SL), density of spikelets per spike (DSS) and plant height (PH), were assessed across 14 (for YP) to 23 (for TGW) year × location × water regime environments in China. Then, the genetic effects were partitioned into additive main effects (a), epistatic main effects (aa) and their environment interaction effects (ae and aae) by using composite interval mapping in a mixed linear model.

Conclusions/Significance

Twelve (YP) to 33 (PH) QTLs were identified on all 21 chromosomes except 6D. QTLs were more frequently observed on chromosomes 1B, 2B, 2D, 5A and 6B, and were concentrated in a few regions on individual chromosomes, exemplified by three striking yield-related QTL clusters on chromosomes 2B, 1B and 4B that explained the correlations between YP and other traits. The additive main-effect QTLs contributed more phenotypic variation than the epistasis and environmental interaction. Consistent with agronomic analyses, a group of progeny derived by selecting TGW and NGS, with higher grain yield, had an increased frequency of QTL for high YP, NGS, TGW, TNSS, PFSS, SL, PH and fewer NSSS, when compared to low yielding progeny. This indicated that it is feasible by marker-assisted selection to facilitate wheat production.     

Natural variation of TaGASR7-A1 affects grain length in common wheat under multiple cultivation conditions

GASR7 is a member of Snakin/GASA gene family in higher plants and has been found associated with grain length (GL) in rice and wheat under normal growth conditions. Here, we report the characterization of three distinct TaGASR7 homoeologs (TaGASR7-A1, TaGASR7-B1 and TaGASR7-D1) in common wheat and their deduced proteins and haplotype variation. TaGASR7 homoeologs were located on wheat group 7 chromosomes. Compared with previously characterized Snakin/GASA members, the central region in deduced TaGASR7 proteins and their orthologs was unique in containing a polyglycine tract. Through analyzing longer genomic sequence, more nucleotide differences were found for the two previously reported major haplotypes (H1c and H1g) of TaGASR7-A1. In contrast, no haplotype variation was detected for TaGASR7-B1 and TaGASR7-D1 in the 94 elite common wheat varieties examined. H1c, but not H1g, tended to associate with larger GL values in nine cultivation environments differing in water and nutrient application. However, the positive association between H1c and other grain traits (grain weight and yield) was affected by cultivation environment. Both H1c- and H1g-type alleles were more highly expressed in the unfertilized caryopses and those collected at 5 days after flowering (DAF). Interestingly, at 5 DAF, the expression level of H1c-type alleles was significantly lower than that of H1g-type alleles. By combining our data with those published previously, we suggest that TaGASR7-A1 is mainly a genetic determinant of GL in wheat with pleiotropic effects on grain weight and yield. Potential mechanism underlying TaGASR7-A1 function and its utility in enhancing genetic and breeding studies of wheat grain morphometric and yield traits are discussed.     

Characterization of an IAA-glucose hydrolase gene <Emphasis Type="Italic">TaTGW6</Emphasis> associated with grain weight in common wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

In rice, the TGW6 gene determines grain weight and encodes a protein with indole-3-acetic acid (IAA)-glucose hydrolase activity. Its homolog in wheat, TaTGW6, is considered as a candidate gene related to grain development. To amplify this gene, we designed primers based on a homologous conserved domain of the rice TGW6 gene. Sequence analysis indicated that TaTGW6 comprises only one exon, with 1656 bp in total and an open reading frame of 1035 bp. Three alleles at TaTGW6 locus detected by the primer pair TG23 were designated as TaTGW6-a, TaTGW6-b and TaTGW6-c, respectively. Compared with TaTGW6-a, TaTGW6-b had a 6-bp InDel at the position 170 downstream of initiation codon, and TaTGW6-c was a null mutant. Both TaTGW6-b and TaTGW6-c could significantly increase grain size and weight other than TaTGW6-a; however, the former two alleles showed a low frequency distribution in modern varieties. TaTGW6 was located on chromosome 4AL using a recombinant inbred line population and a set of Chinese Spring nullisomic-tetrasomic lines. It was linked to the SSR locus Xbarc1047 with a genetic distance of 6.62 cM and explained 15.8–21.0 % of phenotypic variation of grain weight in four environments. Association analysis using a natural population and Chinese wheat mini-core collections additionally validated the relationship of TaTGW6 with grain weight; the gene could explain 7.7–12.4 % of phenotypic variation in three environments. Quantitative real-time PCR revealed that TaTGW6-b showed relatively lower expression than TaTGW6-a in immature grain at 20 and 30 days post-anthesis and in mature grain. The low expression of TaTGW6 generally associated with low IAA content, but with high grain weight. The novel functional marker, designated as TG23, can be used for marker-assisted selection to improve grain weight in wheat and also provides insights into the regulatory mechanism underlying grain weight.     

Gene editing and mutagenesis reveal inter-cultivar differences and additivity in the contribution of <Emphasis Type="Italic">TaGW2</Emphasis> homoeologues to grain size and weight in wheat

Key message

CRISPR-Cas9-based genome editing and EMS mutagenesis revealed inter-cultivar differences and additivity in the contribution of TaGW2 homoeologues to grain size and weight in wheat.

Abstract

The TaGW2 gene homoeologues have been reported to be negative regulators of grain size (GS) and thousand grain weight (TGW) in wheat. However, the contribution of each homoeologue to trait variation among different wheat cultivars is not well documented. We used the CRISPR-Cas9 system and TILLING to mutagenize each homoeologous gene copy in cultivars Bobwhite and Paragon, respectively. Plants carrying single-copy nonsense mutations in different genomes showed different levels of GS/TGW increase, with TGW increasing by an average of 5.5% (edited lines) and 5.3% (TILLING mutants). In any combination, the double homoeologue mutants showed higher phenotypic effects than the respective single-genome mutants. The double mutants had on average 12.1% (edited) and 10.5% (TILLING) higher TGW with respect to wild-type lines. The highest increase in GS and TGW was shown for triple mutants of both cultivars, with increases in 16.3% (edited) and 20.7% (TILLING) in TGW. The additive effects of the TaGW2 homoeologues were also demonstrated by the negative correlation between the functional gene copy number and GS/TGW in Bobwhite mutants and an F₂ population. The highest single-genome increases in GS and TGW in Paragon and Bobwhite were obtained by mutations in the B and D genomes, respectively. These inter-cultivar differences in the phenotypic effects between the TaGW2 gene homoeologues coincide with inter-cultivar differences in the homoeologue expression levels. These results indicate that GS/TGW variation in wheat can be modulated by the dosage of homoeologous genes with inter-cultivar differences in the magnitude of the individual homoeologue effects.

     

Elucidating the genetic basis of biomass accumulation and radiation use efficiency in spring wheat and its role in yield potential

One of the major challenges for plant scientists is increasing wheat (Triticum aestivum) yield potential (YP). A significant bottleneck for increasing YP is achieving increased biomass through optimization of radiation use efficiency (RUE) along the crop cycle. Exotic material such as landraces and synthetic wheat has been incorporated into breeding programmes in an attempt to alleviate this; however, their contribution to YP is still unclear. To understand the genetic basis of biomass accumulation and RUE, we applied genome‐wide association study (GWAS) to a panel of 150 elite spring wheat genotypes including many landrace and synthetically derived lines. The panel was evaluated for 31 traits over 2 years under optimal growing conditions and genotyped using the 35K wheat breeders array. Marker‐trait association identified 94 SNPs significantly associated with yield, agronomic and phenology‐related traits along with RUE and final biomass (BM_PM) at various growth stages that explained 7%–17% of phenotypic variation. Common SNP markers were identified for grain yield, BM_PM and RUE on chromosomes 5A and 7A. Additionally, landrace and synthetic derivative lines showed higher thousand grain weight (TGW), BM_PM and RUE but lower grain number (GM2) and harvest index (HI). Our work demonstrates the use of exotic material as a valuable resource to increase YP. It also provides markers for use in marker‐assisted breeding to systematically increase BM_PM, RUE and TGW and avoid the TGW/GM2 and BM_PM/HI trade‐off. Thus, achieving greater genetic gains in elite germplasm while also highlighting genomic regions and candidate genes for further study.     

Stacking quantitative trait loci (QTL) for Fusarium head blight resistance from non-adapted sources in an European elite spring wheat background and assessing their effects on deoxynivalenol (DON) content and disease severity

Fusarium head blight (FHB) is a devastating disease in wheat that reduces grain yield, grain quality and contaminates the harvest with deoxynivalenol (DON). As potent resistance sources Sumai 3 and its descendants from China and Frontana from Brazil had been analysed by quantitative trait loci (QTL) mapping. We introgressed and stacked two donor QTL from CM82036 (Sumai 3/Thornbird) located on chromosomes 3B and 5A and one donor QTL from Frontana on chromosome 3A in elite European spring wheat and estimated the effects of the three individual donor QTL and their four combinations on DON, Fusarium exoantigen content, and FHB rating adjusted to heading date. One class with the susceptible QTL alleles served as control. Each of the eight QTL classes was represented by 12–15 F₃-derived lines tested in F₅ generation as bulked progeny possessing the respective marker alleles homozygously. Traits were evaluated in a field experiment across four locations with spray inoculation of Fusarium culmorum. All three individual donor-QTL alleles significantly reduced DON content and FHB severity compared to the marker class with no donor QTL. The only exception was the donor-QTL allele 3A that had a low, but non-significant effect on FHB severity. The highest effect had the stacked donor-QTL alleles 3B and 5A for both traits. They jointly reduced DON content by 78% and FHB rating by 55% compared to the susceptible QTL class. Analysis of Fusarium exoantigen content illustrates that lower disease severity is associated with less mycelium content in the grain. In conclusion, QTL from non-adapted sources could be verified in a genetic background of German elite spring wheat. Within the QTL classes significant (P<0.05) genotypic differences were found among the individual genotypes. An additional phenotypic selection would, therefore, be advantageous after performing a marker-based selection.