Initiating polymerization of glycol methacrylate with cyclic diketo carbon acids

Several pharmacologically active cyclic diketone carbon acids, including phenylbutazone and 2-phenyl-1,3-indandione, catalyze the polymerization of glycol methacrylate monomers. GMA-cyclic diketone carbon acid monomer mixtures incorporating imidazole polymerize smoothly without obvious exothermicity at temperatures ranging from ambient to -5 C without the use of ultraviolet light. The only equipment required for this embedding technique is a refrigerator with a freezing compartment which can maintain temperatures of -15 C. A recipe consisting of 5 ml glycol methacrylate (2-hydroxyethyl methacrylate), 0.8 ml 1-pentanol, 16 mg imidazole, and 30 mg monophenylbutazone is recommended for general use. The use of dicyclopentyl methacrylate-glycol methacrylate comonomer mixtures incorporating cyclic ketone catalysts is advocated, as blends of these monomers have low basophilia, and tissues embedded in these matrices stain sharply and brilliantly. It is hypothesized that the driving force for the cyclic ketone-mediated polymerization of glycol methacrylate under basic conditions is furnished by the lysis of cyclic ketone carbon acid peroxides.     

Glycol methacrylate as an embedding medium for bone

A simple and reliable procedure for embedding undecalcified trabecular bone tissue in noncommercial glycol methacrylate (GMA) has been developed. The embedding mixture includes a monomer, methacrylic acid hydroxyethyl ester; a copolymer, methacrylic acid butyl ester; a cross-linker, ethylene glycol dimethacrylate; a catalyst, Luperco; a chemical initiator (N,N-dimethylaniline) and, to avoid excessive elevation of temperature during polymerization, a heat moderator, alpha-terpinene. The appropriate proportions of these components have been selected to give specimens which can be easily sectioned with classical microtomes and which do not swell but spread evenly on a water surface. Since polymerization occurs at -4 C, the method allows demonstration of such enzymatic activities as acid and alkaline phosphatase and carbonic anhydrase. It provides excellent preservation of bone tissue and in studies of bone metabolism allows histomorphometry as well as visualization of fluorescent labeling and radioactive markers. The cost is significantly less than available commercial kits. In our hands glycol methacrylate is at present more useful than methyl methacrylate and is used in our laboratory for routine embedding of bone tissue.     

Embedding Iliac Bone Biopsies at Low Temperature using Glycol and Methyl Methacrylates

A mixture of pure and anhydrous glycol methacrylate and methyl methactylate is used as an embedding medium for iliac bone biopsies. Infiltration is carried out at -20 C with the embedding medium and a cold inactivated catalyst-initiator system. Raising the temperature to 4 C initiates polymerization and limits the peak temperature of polymerization to 25 C. In this way, such thermolabile enzymes as osteoclastic acid phosphatase are preserved. After staining, sections are dehydrated in polyethylene glycol 400 30% in 2-propanol. This gives flat sections and improves staining properties.     

Embedding Media for 1-2 Micron Sectioning. 2. Hydroxyethyl Methacrylate Combined with 2-Butoxyethanol

A hydroxyethyl methacrylate monomer medium incorporating 2-butoxyethanol requires 2 stock solutions for embedding. Solution A: 80 ml of hydroxyethyl methacrylate (Rohm and Haas Co., Philadelphia, Pa.) is mixed well with 16 ml of 2-butoxyethanol; 0.27 gm of benzoyl peroxide, the catalyst, is added and permitted to dissolve. Heating to 40-50 C may be used to accelerate its solution. Solution B: polyethylene glycol 200 or 400, 15 parts, and N,N-dimethylaniline, 1 part, are mixed thoroughly. Tissues are dehydrated in the customary manner to absolute ethanol or other comparable dehydrant, infiltrated completely with A, then cast in a mixture consisting of 42 parts of A well mixed with 1 part of B. Polymerizaion occurs in 4-7 hr. In a water bath at 20 C the time required was about 7 hr; at 28 C, 4 hr. This medium is based on the author's water-polyethylene glycol-hydroxyethyl methacrylate monomer medium (Stain Techn., 42: 119-23, 1967).     

Immobilization of xylan-degrading enzymes from<Emphasis Type="Italic"> Melanocarpus albomyces</Emphasis> IIS 68 on the smart polymer Eudragit L-100

Xylanase of Melanocarpus albomyces IIS 68 was immobilized on Eudragit L-100. The latter is a copolymer of methacrylic acid and methyl methacrylate and is a pH-sensitive smart polymer. The immobilization was carried out by gentle adsorption and an immobilization efficiency of 0.82 was obtained. The enzyme did not leach off the polymer even in the presence of 1 M NaCl and 50% ethylene glycol. The K(m) of the enzyme changed from 5.9 mg ml(-1) to 9.1 mg ml(-1) upon immobilization. The V(max) of the immobilized enzyme showed an increase from 90.9 micro mol ml(-1) min(-1) (for the free enzyme) to 111.1 micro mol ml(-1) min(-1). The immobilized enzyme could be reused up to ten times without impairment of the xylanolytic activity. The immobilized enzyme was also evaluated for its application in pre-bleaching of eucalyptus kraft pulp.     

ATRP synthesis of amphiphilic random,gradient, and block copolymers of 2-(dimethylamino)ethyl methacrylate and n-butyl methacrylate in aqueous media

Amphiphilic random, gradient, and block copolymers of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and n-butyl methacrylate (BMA) were synthesized by atom transfer radical polymerization (ATRP) in water/2-propanol mixtures using a methoxy-poly(ethylene glycol) (MPEG) (M(n) = 2000) macroinitiator. Kinetic studies indicate that the copolymerization is well controlled with molecular weights increasing linearly with conversion. Copolymers with molecular weights up to M(n) = 34000 and low polydispersities (M(w)/M(n) = 1.11-1.47) were prepared. The reactivity ratios were calculated for the copolymerizations catalyzed by CuBr/bpy, (r(DMAEMA) = 1.07, r(BMA) = 1.24). The thermosensitivity and aggregation properties of the random, gradient, and block copolymers significantly depended on the architecture of the copolymers. The lower critical solution temperature of MPEG-b-PDMAEMA(84) was 38 degrees C (5 wt % in water).     

Stimulation of citric acid production in Aspergillus niger by addition of viscous substances in shake culture

When glucose (120mg/ml) was used as a carbon source, Aspergillus niger Yang no. 2. showed a markedly low citric acid productivity in shake culture (15.4 mg/ml) but a high productivity in semi-solid and surface cultures (72.3 mg/ml and 67.6 mg/ml, respectively). Since the viscosity of the medium was assumed to be one of the important factors for citric acid productivity in shake culture, the effects of the addition of viscous substances on citric acid productivity of strain Yang no. 2 were examined. The addition of 2.0–6.0 mg gelatin/ml as a viscous additive to the medium containing glucose as a carbon source increased slightly the medium viscosity but substantially increased the citric acid productivity in shake culture to levels of 52.0–53.3 mg/ml, about 3.4 times as much as that without gelatin. However, no influence of gelatin addition was observed in semi-solid and surface cultures, i.e. under static cultivation conditions. Different mycelial morphologies of the strain were observed when cultivations were done in shake culture with or without the addition of gelatin. Addition of 5.0 mg agar/ml, 5.0 mg carageenan/ml, 2.5 mg carboxymethylcellulose/ml and 2.5 mg polyethylene glycol 6000/ml, to the medium containing glucose as a carbon source also increased the citric acid productivity in shake culture to levels of 39.2–54.7 mg/ml. Since Yang no. 2 does not utilize these viscous substances, these results suggested that the viscous substances functioned as protectants for the mycelium from physiological stresses due to shaking and as a consequence resulted in a remarkably increased citric acid productivity in shake culture.     

Enhancing the catalytic repertoire of nucleic acids: a systematic study of linker length and rigidity

The incorporation of potentially catalytic groups in DNA is of interest for the in vitro selection of novel deoxyribozymes. A series of 10 C5-modified analogues of 2'-deoxyuridine triphosphate have been synthesised that possess side chains of differing flexibility and bearing a primary amino or imidazole functionality. For each series of nucleotide analogues differing degrees of flexibility of the C5 side chain was achieved through the use of alkynyl, alkenyl and alkyl moieties. The imidazole function was conjugated to these C5-amino-modified nucleotides using either imidazole 4-acetic acid or imidazole 4-acrylic acid (urocanic acid). The substrate properties of the nucleotides (fully replacing dTTP) with TAQ polymerase during PCR have been investigated in order to evaluate their potential applications for in vitro selection experiments. 5-(3-Aminopropynyl)dUTP and 5-(E-3-aminopropenyl)dUTP and their imidazole 4-acetic acid- and urocanic acid-modified conjugates were found to be substrates. In contrast, C5-amino-modified dUTPs with alkane or Z-alkene linkers and their corresponding conjugates were not substrates. The incorporation of these analogues during PCR has been confirmed by inhibition of restriction enzyme digestion using XBAI and by mass spectrometry of the PCR products.     

Increased ketogenesis related to insulin deficiency in isolated hepatocytes from NIDDM model rats.

To investigate the hepatic ketone body metabolism in NIDDM, we studied the ketone body production rates in hepatocytes from newly developed non-obese NIDDM model rats. NIDDM model rats were prepared by intraperitoneal injection of streptozotocin at 2 or 5 days of age (STZ2, STZ5 respectively). After 10-15 weeks, ketone body production rates in hepatocytes isolated from these rats were compared with those from control rats as well as ketotic rats made by intravenous injection of streptozotocin into adult rats. Basal ketone body production rates from 0.3 mM [U-14C] palmitate in hepatocytes from control, STZ 2, STZ 5 and ketotic rats were 11.7 +/- 0.98, 14.9 +/- 0.72, 16.0 +/- 0.45, 22.8 +/- 2.32 nmole.palmitate/mg.prot/hr, respectively. These rates were stimulated by 1 microgram/ml of glucagon in control, STZ 2 and STZ 5 rats (14.1 +/- 0.99, 18.6 +/- 1.36, 18.7 +/- 0.69 nmole.palmitate/mg.prot/hr, respectively), but not in ketotic rats (22.8 +/- 2.07 nmole.palmitate/mg.prot/hr). The similar effects were observed by 1 microgram/ml of epinephrine. The basal ketone body production rates were negatively correlated to both hepatic glycogen contents and plasma IRI levels. Considering these parameters together, the extent of metabolic derangement in STZ 2 and STZ 5 rats was between that in control and ketotic rats. These results indicate that the derangements of hepatic ketone body production are related to the severity of insulin deficiency and suggest that the enhanced hepatic ketogenesis contributes in part to the elevated plasma ketone body levels in non-obese NIDDM.     

Association of hydrophobically-modified poly(ethylene glycol) with fusogenic liposomes

We present results on using cooperative interactions to shield liposomes by incorporating multiple hydrophobic anchoring sites on polyethylene glycol (PEG) polymers. The hydrophobically-modified PEGs (HMPEGs) are comb-graft polymers with strictly alternating monodisperse PEG blocks (M(w)=6, 12, or 35 kDa) bonded to C18 stearylamide hydrophobes. Cooperativity is varied by changing the degree of oligomerization at a constant ratio of PEG to stearylamide. Fusogenic liposomes prepared from N-C12-DOPE:DOPC 7:3 (mol:mol) were equilibrated with HMPEGs. Affinity for polymer association to liposomes increases with the degree of oligomerization; equilibrium constants (given as surface coverage per equilibrium concentration of free polymer) for 6 kDa PEG increased from 6.1+/-0.8 (mg/m(2))/(mg/ml) for 2.5 loops to 78.1+/-12.2 (mg/m(2))/(mg/ml) for 13 loops. In contrast, the equilibrium constant for distearoylphosphatidylethanolamine-poly(ethylene glycol) (DSPE-PEG5k) was 0.4+/-0.1 (mg/m(2))/(mg/ml).The multi-loop HMPEGs demonstrate higher levels of protection from complement binding than DSPE-PEG5k. Greater protection does not correlate with binding strength alone. The best shielding was by HMPEG6k-DP3 (with three 6 kDa PEG loops), suggesting that PEG chains with adequate surface mobility provide optimal protection from complement opsonization. Complement binding at 30 min and 12 h demonstrates that protection by multi-looped PEGs is constant whereas DSPE-PEG5k initially protects but presumably partitions off of the surface at longer times.     

Silane-modified magnetic beads: application to immunoglobulin G separation

The magnetic poly(2-hydroxyethyl methacrylate ethylene glycol dimethacrylate) [m-poly(HEMA-EGDMA)] beads (150-250-microm diameter in spherical form) were prepared by a radical suspension polymerization technique. The pseudo-specific ligand, reactive imidazole containing 3-(2-imidazoline-1-yl)propyl (triethoxysilane) (IMEO) was selected as a silanization agent. IMEO was covalently immobilized onto the magnetic beads. IMEO-immobilized m-poly(HEMA-EGDMA) beads were used for the affinity adsorption of immunoglobulin-G (IgG) from aqueous solutions and human plasma. To evaluate the degree of IMEO attachment, the m-poly(HEMA-EGDMA) beads were subjected to Si analysis by using flame atomizer atomic absorption spectrometer, and it was estimated as 36.6 mg IMEO/g of polymer. The nonspecific IgG adsorption onto the plain m-poly(HEMA-EGDMA) beads was very low (about 0.4 mg/g). Higher adsorption values (up to 55 mg/g) were obtained when the m-poly(HEMA-EGDMA)/IMEO beads were used from both aqueous solutions and human plasma. The maximum IgG adsorption on the m-poly(HEMA-EGDMA)-IMEO beads was observed at pH 7.0. The IgG molecules could be repeatedly adsorbed and desorbed with m-poly(HEMA-EGDMA)-IMEO beads without noticeable loss in the IgG adsorption capacity. The adsorption capacity from human plasma in magnetically stabilized fluidized bed decreased drastically from 78.9 to 19.6 mg/g with the increase of the flow rate from 0.2 to 3.5 mL/min.     

Continuous beer fermentation by high cell-density culture of bottom brewer's yeast

Continuous beer production was investigated in a high cell-density culture system which consisted of two stages for the fermentation and sedimentation of yeast cells. The continuous culture was carried out for a fermentation time of 5,500 h without contamination, at varying dilution rates and fermentation temperatures in the ranges of 0.017-0.033 h⁻¹ and 6.5–8.5°C, respectively. This process was found to be suitable for continuous and stable beer brewing. Under these conditions, the cell concentration in the first stage was about 80 times as high as that in the exit of the second stage. Concentrations of viable cells, sugar and ethanol were maintained at 1.3 × 10⁹ cells/ml, 25 and 36 g/l, respectively, and were hardly affected by fermentation temperature. Concentrations of ethyl acetate, isoamyl alcohol and isoamyl acetate were similar in the fermentation temperature ranges of 6.5–8.5°C, and the amounts at a fermentation temperature of 7°C were comparable to those of lager-type beer. Diacetyl flavor, which is known to be an effluent component that causes deterioration in the second stag e (young beer), was maintained at 1.2 ppm at a dilution rate and fermentation temperature of 0.022 h⁻¹ and 7°C, respectively. The diacetyl flavor was due to the accumulation of vicinal diketone, the precursor of which is acetohydroxy acid. The acetohydroxy acid was converted to vicinal diketone by pretreatment at 60°C for 30 min. The vicinal diketone was then consumed by the yeast during after-fermentation at a fermentation temperature of 3°C. Using this method, total vicinal diketone decreased below 0.3 ppm for an after-fermentation time of 6.8 h, which was 225 times as fast as that of after-fermentation without the pretreatment. This process may make it possible to achieve continuous beer fermentation from the fermentation stage to after-fermentation for diacetyl removal.     

Bone alkaline phosphatase kinetics studied by a new method

Summary Studies of enzyme kinetics by histochemical methods has been seriously impaired by available methods. This study combines two newer methods, i.e., sectioning undecalcified bone from glycol methacrylate and the use of atomic absorption spectrophotometry for photographic densitometry. The results indicate that the substrate concentration for zero order kinetics of the alkaline phosphatase reaction in bone is 0.5 mg/ml of substrate; and the Km of the same reaction is estimated to be 0.25 mg/ml or 0.56 mM of substrate.     

Alkaline and Acid Phosphatase Demonstration in Human Bone and Cartilage: Effects of Fixation Interval and Methacrylate Embedments

Human bone and cartilage specimens were evaluated for acid and alkaline phosphatase localization following varying fixation periods for fresh or frozen tissue. Formalin fixations of up to 183 hr were followed by embedment in methyl methacrylate; frozen tissue was examined either without fixation or following fixation for up to 1 hr and subsequent glycol or methyl methacrylate embedding. The humeral epiphysis of a young patient with osteogenic sarcoma showed optimum acid and alkaline phosphatase localization following fixation for periods up to 15 hr and embedding in methyl methacrylate. Frozen costochondral junction from a newborn with osteogenesis imperfecta type II showed optimum acid and alkaline phosphatase localization following 30 min fixation in formalin and embedding in methyl methacrylate or after 5 min fixation and embedding in glycol methacrylate.     

Alkaline and acid phosphatase demonstration in human bone and cartilage: effects of fixation interval and methacrylate embedments

Human bone and cartilage specimens were evaluated for acid and alkaline phosphatase localization following varying fixation periods for fresh or frozen tissue. Formalin fixations of up to 183 hr were followed by embedment in methyl methacrylate; frozen tissue was examined either without fixation or following fixation for up to 1 hr and subsequent glycol or methyl methacrylate embedding. The humeral epiphysis of a young patient with osteogenic sarcoma showed optimum acid and alkaline phosphatase localization following fixation for periods up to 15 hr and embedding in methyl methacrylate. Frozen costochondral junction from a newborn with osteogenesis imperfecta type II showed optimum acid and alkaline phosphatase localization following 30 min fixation in formalin and embedding in methyl methacrylate or after 5 min fixation and embedding in glycol methacrylate.     

Heterogenized polymetallic catalysts Part II. Oxidation of 3,5-di-t-butylphenol by Cu(II), Fe(III) and Pd(II) complexed to a polyphenylene polymer containing ß-di- and triketone surface ligands; an improved catalyst system

Polyphenylene polymer preparation involves the cyclic trimerization polymerization of acetylated methyl benzoate with diacetyl benzene. Since the methyl benzoate groups do not take part in the polymerization they are present in high concentration. The ß-diketone ligands were placed on the surface by reaction of the methylbenzoate group with base and a methyl ketone and the triketone by reaction with base to give the ß-triketone. The ß-triketones can bind two metal ions in a known geometry that is suitable for bimetallic catalysis of the rapid polyelectron oxidation of catechols. The final catalytic surfaces were prepared by treating the chemically modified polymer with copper(II), iron(II) and palladium(II) acetonitrile complexes with non-coordinating BF₄⁻ as the anion. Since the metal ions contain no strongly coordinating ligand, they are very reactive species. These surfaces catalyzed the rapid air oxidation of 3,5-di-tert-butylcatechol (DTBC). The diketone surfaces gave only 3,5-di-tert-butyl-o-quinone (DTBQ) while the triketone surfaces gave ring-cleaved products, confirming the special catalytic effect of the triketone surface. Also, only the triketone catalysts showed any activity for ring cleavage oxidation of DTBQ. These catalysts were much more reactive than previous ones using the same polyphenylene polymer but without the methyl benzoate groups. With these polymers the di- and triketone groups were placed on the surface by chemical modification of the unpolymerized acetyl groups.     

Histochemical identification of osteoclasts. Review of current methods and reappraisal of a simple procedure for routine diagnosis on undecalcified human iliac bone biopsies

Osteoclasts are known to have a high acid phosphatase content. We have adapted the simple simultaneous mono-coupling azo-dye method of Grogg and Pearse to undecalcified bone sections. A cold embedding in a mixture of glycol and methyl methacrylate was shown to well preserve the enzyme activity. Sodium alpha-naphtyl phosphate (1 mg/ml) and fast violet B (2 mg/ml) are used in 0.1 M acetate buffer, pH 5.0. The addition of 1 mM L(+) sodium tartrate selectively inhibits the acid phosphoprotein phosphatase ("osteoblastic acid phosphatase") but not osteoclastic lysosomal acid phosphatase. Counterstaining with phosphomolybdic aniline blue WS leads to well contrasted sections, providing accurate measurements of osteoclast number.     

Enzyme immobilization on ultrafine cellulose fibers via poly(acrylic acid) electrolyte grafts

Ultrafine cellulose fiber (diameter 200-400 nm) surfaces were grafted with polyacrylic acid (PAA) via either ceric ion initiated polymerization or methacrylation of cellulose with methacrylate chloride (MACl) and subsequent free-radical polymerization of acrylic acid. PAA grafts by ceric ion initiated polymerization increased with increasing reaction time (2-24 h), monomer (0.3-2.4 M), and initiator (1-10 mM) concentrations, and spanned a broad range from 5.5-850%. PAA grafts on the methacrylated cellulose fibers also increased with increasing molar ratios of MACl to cellulosic hydroxyl groups (MACl/OH, 2-6.4) and monomer acrylic acid (AA) to initiator potassium persulfate (KPS) ratios ([AA]/[KPS], 1.5-6), and were in a much narrower range between 12.8% and 29.4%. The adsorption of lipase (at 1 mg/ml lipase and pH 7) and the activity of adsorbed lipase (pH 8.5, 30 degrees C), in both cases decreased with increasing PAA grafts. The highest adsorption and activity of the lipase on the ceric ion initiated grafted fibers were 1.28 g/g PAA and 4.3 U/mg lipase, respectively, at the lowest grafting level of 5.5% PAA, whereas they were 0.33 g/g PAA and 7.1 U/mg lipase, respectively, at 12.8% PAA grafts on the methacrylated and grafted fibers. The properties of the grafted fibers and the absorption behavior and activity of lipase suggest that the PAA grafts are gel-like by ceric-initiated reaction and brush-like by methacrylation and polymerization. The adsorbed lipase on the ceric ion-initiated grafted surface possessed greatly improved organic solvent stability over the crude lipase. The adsorbed lipases exhibited 0.5 and 0.3 of the initial activity in the second and third assay cycles, respectively.     

A Hematoxylin and Eosin-Like Stain for Glycol Methacrylate Embedded Tissue Sections

A staining procedure is described for use with glycol methacrylate embedded tissue sections which does not stain the plastic embedment or remove the sections from the glass slides. The basic dye is celestine blue B. It is prepared by treating 1 g of the dye with 0.5 ml concentrated sulfuric acid. It is then dissolved with the following solution. Add 14 ml glycerine to 100 ml 2.5 percent ferric ammonium sulfate and warm the solution to 50 C. Finally adjust the pH to 0.8 to 0.9 The acid staining solution consists of 0.075 percent ponceau de xylidine and 0.025 percent acid fuchsin in 10 percent acetic acid. Slides containing the dried plastic sections are immersed in the celestine blue solution for five minutes and in the ponceau-fuchsin solution for ten minutes with an intervening water rinse. After a final wash, the sections are air dried and coverslipped. This staining procedure colors the tissues nearly the same as hematoxylin and eosin procedures.     

gamma-Glutamyl transpeptidase demonstrated in tissue sections embedded in glycol methacrylate resin

Summary A method is described for the histochemical demonstration of -glutamyl transpeptidase in tissue sections embedded in glycol methacrylate at low temperature. Enzyme activity was preserved by a short (3 h) fixation of tissue in 4% paraformaldehyde at 4° C prior to embedding at 4° C. Tissue embedded in glycol methacrylate combined good morphology with accurate enzyme localization. Blocks of the embedded tissue could be stored at room temperature for at least 3 months without loss of enzyme activity. The resin is non-fluorescent, allowing the use of the fluorescent coupling agent 5-nitrosalicylaldehyde to visualize the reaction product.