Direct coupling of expanded bed adsorption with a downstream purification step

In the course of developing a cost-effective, scaleable process for the purification of a recombinant protein from Chinese hamster ovary (CHO) suspension cell culture, we investigated direct capture of this molecule using expanded bed adsorption (EBA). EBA combines clarification, purification, and concentration of the product into a single step. The unclarified bioreactor material was directly applied to a STREAMLINE 25 column containing an affinity STREAMLINE adsorbent. This work focused on simplifying the EBA operations and minimizing the overall processing time by running the EBA column unidirectionally, eluting in the expanded bed mode, and coupling the EBA column directly with ion exchange or hydrophobic interaction chromatography. Unidirectional EBA was clearly a simpler unit operation and did not require the use of specialized equipment. The increase in the elution pool volume was insignificant, especially when the EBA column was eluted directly onto the downstream column. Scale-down was simple and could be automated. Coupling of unidirectional EBA with a downstream purification step reduced processing time, equipment requirements and cost.     

Cell/adsorbent interactions in expanded bed adsorption of proteins

Expanded bed adsorption (EBA) is an integrated technology for the primary recovery of proteins from unclarified feedstock. A method is presented which allows a qualitative and quantitative understanding of the main mechanisms governing the interaction of biomass with fluidised resins. A pulse response technique was used to determine the adsorption of various cell types (yeast, Gram positive and Gram negative bacteria, mammalian cells and yeast homogenate) to a range of commercially available matrices for EBA. Cells and cell debris were found to interact with the ligands of agarose based resins mainly by electrostatic forces. From the adsorbents investigated the anion exchange matrix showed the most severe interactions, while cation exchange and affinity adsorbents appeared to be less affected. Within the range of biologic systems under study E. coli cells had the lowest tendency of binding to all matrices while hybridoma cells attached to all the adsorbents except the protein A affinity matrix. The method presented may be employed for screening of suitable biomass/adsorbent combinations, which yield a robust and reliable initial capture step by expanded bed adsorption from unclarified feedstock.     

A Study of the interaction of HEK-293 cells with streamline chelating adsorbent in expanded bed operation

Expanded bed adsorption (EBA) is an efficient protein purification process reducing time and steps of downstream processing (DSP) since nonclarified culture media can be processed directly without prior treatments such as filtration or centrifugation. However, cells and debris can interact with the adsorbent and affect bed stability as well as purification performance. To optimize EBA operating conditions these biomass/adsorbent interactions have to be understood and characterized. The adsorption of Human Embryonic Kidney cells (HEK 293) on unprimed and nickel-primed metal affinity adsorbent was studied in a closed loop EBA setup. With the unprimed adsorbent, the overall level of interaction observed was nonsignificant. With the nickel-primed adsorbent and an initial cell concentration ranging from 0.08 x 10(6) to 0.2 x 10(6) cells/mL, biomass/adsorbent interaction was found to be moderate and the adsorption apparent first-order kinetic rate constant was determined to be k = 0.009 to 0.011 min(-1).     

A study of the influence of yeast cell debris on protein and alpha-glucosidase adsorption at various zones within the expanded bed using in-bed sampling

Expanded bed adsorption chromatography is used to capture products directly from unclarified feedstocks, thus combining solid-liquid separation, product concentration and preliminary purification into a single step. However, when non-specific ion-exchangers are used as the adsorbent in the expanded bed, there is the possibility that electrostatic interactions of cells or cell debris with the adsorbent may interfere with the adsorption of soluble products. These interactions depend on the particle size of the cell debris and its surface charge, which in turn depend on the extent of disruption used to release the intracellular products. The interactions occurring during expanded bed adsorption between the anionic ion-exchanger STREAMLINE DEAE and particulate yeast homogenates obtained by high pressure homogenisation at different intensities of disruption achieved by operating at different pressures were studied, while maintaining all other parameters constant. In-bed sampling from the expanded bed using ports fitted up the height of expanded bed was used to study the retention of yeast cells and cell debris within the bed and its influence on the adsorption of total soluble protein and alpha-glucosidase within various zones of the expanded bed. The retention of the biomass present in the homogenate obtained at a lower intensity of disruption was found to be high at the lower end of the column (17% from 13.8 MPa sample compared to 1% from 41.4 MPa sample). This interaction of the particulate material with the adsorbent was found to reduce the dynamic binding capacity of the adsorbent for total soluble protein from 3.6 mg/mL adsorbent for 41.4 MPa sample to 3.0 mg/mL adsorbent for 13.8 MPa sample. The adsorption of alpha-glucosidase was found to increase with an increase in the concentration of the enzyme in the feed, which increased with the intensity of disruption. Selective adsorption of 6,732 U alpha-glucosidase per mg of total protein bound, was noticed for the feedstock prepared at a higher disruption intensity at 41.4 MPa compared to adsorption of 1,262 U/mg of total protein bound for that prepared at 13.8 MPa. The selective adsorption of alpha-glucosidase due to its high concentration together with simultaneous high specific activity of the enzyme in the feed indicated the significance of selective release of enzymes during microbial cell disruption for efficient expanded bed adsorption processes.     

Influence of the extent of disruption of Bakers' yeast on protein adsorption in expanded beds

Expanded bed adsorption chromatography is used to capture the protein product of interest from a crude biological suspension directly, thereby eliminating the need for the removal of the cell debris. While this technique may replace three or four unit operations in a typical downstream process for biological product recovery, the adsorption process is influenced by the interaction between the microbial cells or cell debris and the adsorbent as well as the presence of contaminating solutes. The influence of the extent and nature of disruption of Bakers' yeast on the adsorption of the total soluble protein and alpha-glucosidase was investigated in this study. Two different techniques were used for cell disruption: high pressure homogenisation and hydrodynamic cavitation. Two different adsorbents were chosen: anionic Streamline DEAE and cationic Streamline SP. The settled bed height and the superficial velocity were constant across all experiments. The feedstock was characterised in terms of viscosity, pH, conductivity, particle size distribution of the cell debris and the extent of protein and alpha-glucosidase released. The performance of the adsorption process was found to be influenced by the electrostatic interactions of cell debris with the anionic adsorbent Streamline DEAE and the intraparticle diffusional resistance inside the pores of the adsorbent matrix. The increase in the intensity of disruption resulted in an increase in the dynamic binding capacity (10% feed) of both the total soluble protein and the alpha-glucosidase. However, the increase in the DBC of protein and alpha-glucosidase were not proportional. The amount of protein that could be adsorbed per ml of adsorbent from the samples subjected to a lower intensity of disruption was found to exceed that obtained at a higher disruption intensity on increasing the volume of feed suggesting multilayer adsorption. In this case, selective adsorption of the model protein alpha-glucosidase was reduced, illustrating the compromise of maximising protein recovery through non-specific binding. The study illustrates the need for an interrogation of the intensity of disruption needed and a rigorous understanding of the influence of cell debris and adsorbent-protein interaction, in optimising the selective recovery of intracellular products by EBA.     

Clarification and capture of high‐concentration refold pools for E. coli‐based therapeutics using expanded bed adsorption chromatography

Expanded bed adsorption (EBA) chromatography was investigated for clarification and capture of high‐concentration refold pools of Escherichia coli‐based therapeutics. Refolding of denatured inclusion bodies (IBs) at high protein concentration significantly improved product throughput; however, direct filtration of the refold materials became very challenging because of high content of protein precipitates formed during refolding. In addition, irreversible protein precipitation caused by high local concentration was encountered in packed bed capture during cation exchange chromatography elution, which limited column loading capacity and capture step productivity. In this study, the two issues are addressed in one unit operation by using EBA. Specifically, EBA can handle feed streams with significant amount of particles and precipitates, which eliminated the need for refold pool clarification through filtration. The relatively broad EBA elution profile is particularly suitable for proteins of low solubility and can effectively avoid product loss previously associated with on‐column precipitation during capture. As the EBA resin (RHOBUST^® FastLine SP IEX) used here has unique properties, it can be operated at high linear velocity (800–1,600 cm/h), while achieving a selectivity and impurity clearance largely comparable to the packed bed resin of the same ligand chemistry (SP Sepharose FF). Furthermore, the filtration of the EBA elution pool is easily manageable within facility capability. Overall, this study demonstrates that the EBA process helps debottleneck the purification of high‐turbidity refold pools by removing precipitates and concurrently capturing the product, which can be applied to other E. coli‐based therapeutics that also requires refolding of IBs. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 30:113–123, 2014     

Ion exchange purification of G6PDH from unclarified yeast cell homogenates using expanded bed adsorption

The use of expanded beds of STREAMLINE ion exchange adsorbents for the direct extraction of an intracellular enzyme glucose-6-phosphate dehydrogenase (G6PDH) from unclarified yeast cell homogenates has been investigated. It has been demonstrated that such crude feedstocks can be applied to the bed without prior clarification steps. The purification of G6PDH from an unclarified yeast homogenate was chosen as a model system containing the typical features of a direct extraction technique. Optimal conditions for the purification were determined in small scale, packed bed experiments conducted with clarified homogenates. Results from these experiments were used to develop a preparative scale separation of G6PDH in a STREAMLINE 50 EBA apparatus. The use of an on-line rotameter for measuring and controlling the height of the expanded bed when operated in highly turbid feedstocks was demonstrated. STREAMLINE DEAE has been shown to be successful in achieving isolation of G6PDH from an unclarified homogenate with a purification factor of 12 and yield of 98% in a single step process. This ion exchange adsorbent is readily cleaned using simple cleaning-in-place procedures without affecting either adsorption or the bed expansion properties of the adsorbent after many cycles of operation. The ability of combining clarification, capture, and purification in a single step will greatly simplify downstream processing flowsheets and reduce the costs of protein purification. (c) 1996 John Wiley & Sons, Inc.     

Zeta potential as a diagnostic tool to evaluate the biomass electrostatic adhesion during ion-exchange expanded bed application

Expanded bed adsorption is an integrative technology in downstream processing allowing the direct capture of target proteins from biomass (cells or cell debris) containing feedstocks. Potential adhesion of biomass on the surface of adsorbent, however, may hamper the application of this technique. Since the electrostatic forces dominate the interactions between biomass and adsorbent, the concept of zeta potential was introduced to characterize the biomass/adsorbent electrostatic interactions during expanded bed application. The criterion of zeta potential evaluation proposed in the previous paper (Biotechnol Bioeng, 83(2):149-157, 2003) was verified further with the experimental validation. The zeta potential of intact cells and homogenates of four microorganisms (Escherichia coli, Bacillus subtilis, Pichia pastoris, and S. cerevisiae) were measured under varying pH and salt concentration, and two ion-exchange adsorbents (Streamline DEAE and Streamline QXL) were investigated. The biomass transmission index (BTI) from the biomass pulse response experiments was used as the indicator of biomass adhesion in expanded bed. Combining the influences from zeta potential of adsorbent (zeta(a)), zeta potential of biomass (zeta(b)) and biomass size (d), a good relationship was established between the zeta potential parameter (-zeta(a)zeta(b)d) and BTI for all experimental conditions. The threshold value of parameter (-zeta(a)zeta(b)d) can be defined as 120 mV2 microm for BTI above 0.9. This means that the systems with (-zeta(a)zeta(b)d) < 120 show neglectable electrostatic bio-adhesion, and would have a considerable probability of forming stable expanded beds in a biomass suspension under the particular experimental conditions.     

Evaluation of three expanded bed adsorption anion exchange matrices with the aid of recombinant enhanced green fluorescent protein overexpressed in Escherichia coli

Three anion exchanger expanded bed adsorption (EBA) matrices: Streamline DEAE, Streamline Q XL and Q Hyper Z were evaluated with the aid of EFGP from an ultrasonic homogenate of Escherichia coli. Two pH of buffer were tested. Capture was done in an expanded mode whereas elution was done in a packed mode. The same conditions were chosen for evaluation of the three matrices. We observed a loss of EGFP (8-15%) in the through flow fraction especially with the Streamline Q XL matrix, probably due to an aggregation of beads during sample application. The beads of this matrix possess tentacles which probably retain a lot of cellular and molecular debris. The two other matrices gave a good purification of the EGFP (7-15-fold) but the Q Hyper Z matrix appeared to give the best results. It is composed of little size and density beads which lead to a higher exchange surface and then a better mass transfer.     

Minimising biomass/adsorbent interactions in expanded bed adsorption processes: a methodological design approach

Expanded bed adsorption (EBA) is an integrated technology for the primary recovery of proteins from crude feedstock. Interactions between solid matter in the feed suspension and fluidised adsorbent particles influence bed stability and therefore have a significant impact on protein adsorption in expanded beds. In order to design efficient and reliable EBA processes a strategy is needed, which allows to find operating conditions, where these adverse events do not take place. In this paper a methodological approach is presented, which allows systematic characterisation and minimisation of cell/adsorbent interactions with as little experimental effort as possible. Adsorption of BSA to the anion exchanger Streamline Q XL from a suspension containing S. cerevisiae cells was chosen as a model system with a strong affinity of the biomass towards the stationary phase. Finite bath biomass adsorption experiments were developed as an initial screening method to estimate a potential interference. The adhesiveness of S. cerevisiae to the anion exchanger could be reduced significantly by increasing the conductivity of the feedstock. A biomass pulse response method was used to find optimal operation conditions showing no cell/adsorbent interactions. A good correlation was found between the finite bath test and the pulse experiment for a variety of suspensions (intact yeast cells, E. coli homogenate and hybridoma cells) and adsorbents (Streamline Q XL, DEAE and SP), which allows to predict cell/adsorbent interactions in expanded beds just from finite bath adsorption tests. Under the optimised operating conditions obtained using the prior methods, the stability of the expanded bed was investigated during fluidisation in biomass containing feedstock (up to 15% yeast on wet weight basis) employing residence time distribution analysis and evaluation by an advanced model. Based on these studies threshold values were defined for the individual experiments, which have to be achieved in order to obtain an efficient EBA process. Breakthrough experiments were conducted to characterise the efficiency of BSA adsorption from S. cerevisiae suspensions in EBA mode under varying operating conditions. This allowed to correlate the stability of the expanded bed with its sorption efficiency and therefore could be used to verify the threshold values defined. The approach presented in this work provides a fast and simple way to minimise cell/adsorbent interactions and to define a window of operation for protein purification using EBA.     

Cost Comparison of Protein Capture from Cultivation Broths by Expanded and Packed Bed Adsorption

In the downstream processing of recombinant protein production, the reduction of unit operations required for product capture and purification, is of the utmost priority due to its cost diminishing effect. In this regard, target protein capture from cell suspensions in a fluidized bed of affinity particles with different sizes (expanded bed adsorption (EBA) with classified particles), presents an efficient tool since EBA may substitute cell disintegration, separation by centrifugation or filtration, and packed bed adsorption. However, as illustrated by experiments with the BSA/yeast cells system, the entire broth processing used in EBA also has detrimental influences due to the cell (or cell debris) binding on the affinity carrier. In particular, external mass transfer may become more dominant, and the lifetime of the affinity particles may reduce as a result of other cleaning procedures. Using simulations performed with a commercial software package, the cost superiority of alternate process routes (EBA or packed bed adsorption with preceding steps) can be evaluated. This elucidates the favorable application range for each route.     

Polyelectrolyte-coated ion exchangers for cell-resistant expanded bed adsorption

Adsorption chromatography in expanded beds is a widely used technology for direct capture of target proteins from fermentation broths. However, in many cases this method cannot be applied as a result of the strong tendency of cells or cell debris to interact with the adsorbent beads. To prevent contamination of the expanded bed with the biomass, STREAMLINE DEAE, anion exchanger designed for expanded bed adsorption, was modified with a layer of poly(acrylic acid) (PAA). The shielding layer of polyelectrolyte was attached to the surface of the matrix beads via electrostatic interactions. PAA with a high degree of polymerization was chosen to prevent diffusion of large polymer molecules into the pores of adsorbent. Thus, the shielding layer of PAA was adsorbed only at the mouth of the pores of STREAMLINE DEAE beads and only marginally decreased the binding capacity of the ion exchanger for bovine serum albumin, the model protein in this study. PAA-coated STREAMLINE DEAE practically did not interact with yeast cells, which otherwise bound strongly to the native adsorbent at neutral conditions. Cell-resistant PAA-coated anion exchanger was successfully used for isolation of BSA from the model protein mixture containing BSA, lysozyme (positively charged at applied conditions), and yeast cells. The layer of PAA was stable under mild elution conditions, and the modified adsorbent could be used in the repeated purification cycles.     

Target control of cell disruption to minimize the biomass electrostatic adhesion during anion-exchange expanded bed adsorption

Expanded bed adsorption (EBA) is an integrative unit operation for the primary recovery of bioproducts from crude feedstock. Biomass electrostatic adhesion often leads to bad bed stability and low adsorption capacity. The results indicate that effective cell disruption is a potential approach to reduce the biomass adhesion during anion-exchange EBA. Two common cell disruption methods (sonication treatment and high-pressure disruption with a French press) were investigated in the present work. The mean size of cell debris reduced dramatically during the cell disruption process, and the absolute value of the zeta potential of cell debris also decreased significantly as the mean size reduced. The biomass transmission index (BTI) obtained through the biomass pulse response experiment was used to quantitatively evaluate the biomass-adsorbent interaction. Combining the influences of zeta potential of adsorbent (zetaA), zeta potential of biomass (zetaB), and biomass mean size (dB), the parameter of (-zetaA.zetaB.dB) was explored as a reasonable indicator of biomass adhesion in expanded beds. A good linear correlation was confirmed between BTI and (-zetaA.zetaB.dB) for all biomass and cell disruption conditions tested, which was independent of the cell disruption methods. A target parameter (-zetaA.zetaB.dB) of 120 mV2mum was derived for BTI above 0.9, which meant a very slight influence of biomass on the stability of the expanded bed. This criterion could be used as a rational control target for cell disruption processes in EBA applications.     

Monitoring, modeling, and control strategies for expanded-bed adsorption processes

Expanded-bed adsorption (EBA) is a technique for the purification of proteins from cellular debris in downstream processing. An expanded bed presents the possibility of protein recovery in a single step, eliminating the often costly clarification processing steps such as ultrafiltration, centrifugation, and precipitation. An obstacle to the successful commercialization of this technology is the inability to accurately monitor and control the bed height in these systems.In this paper, we present an overview of work in our laboratory addressing monitoring, modeling, and control strategies as applied to EBA. First, we present the development of a level measurement technique based upon ultrasonics. It is shown that this technique has great promise for bed-height measurement in EBA systems. Second, we present modeling strategies for bed-height dynamics due to flow rate and fluid property changes, and lastly, we show how monitoring and modeling information can be used for the control and regulation of bed expansion.     

Separation of nattokinase fromBacillus subtilis fermentation broth by expanded bed adsorption with mixed-mode adsorbent

Mixed-mode hydrophobic/ionic matrices exhibit a salt-tolerant property for adsorbing target protein from high-ionic strength feedstock, which allows the application of undiluted feedstockvia an expanded bed process. In the present work, a new type of mixed-mode adsorbent designed for expanded bed adsorption, Fastline PRO^®, was challenged for the capture of nattokinase from the high ionic fermentation broth ofBacillus subtilis. Two important factors, pH and ion concentration, were investigated with regard to the performance of nattokinase adsorption. Under initial fermentation broth conditions (pH 6.6 and conductivity of 10 mS/cm) the adsorption capacity of nattokinase with Fastline PRO was high, with a maximum capacity of 5,350 U/mL adsorbent. The elution behaviors were investigated using packed bed adsorption experiments, which demonstrated that the effective desorption of nattokinase could be achieved by effecting a pH of 9.5. The biomass pulse response experiments were carried out in order to evaluate the biomass/adsorbent interactions betweenBacillus subtilis cells and Fastline PRO, and to demonstrate a stable expanded bed in the feedstock containingBacillus subtilis cells. Finally, an EBA process, utilizing mixed-mode Fastline PRO adsorbent, was optimized to capture nattokinase directly from the fermentation broth. The purification factor reached 12.3, thereby demonstrating the advantages of the mixed-mode EBA in enzyme separation.     

Physicochemical parameters involved in the interaction of Saccharomyces cerevisiae cells with ion-exchange adsorbents in expanded bed chromatography

Expanded bed adsorption (EBA) is an interesting primary technology allowing the adsorption of target proteins from unclarified feedstock in order to combine separation, concentration, and purification steps. However, interactions between cells and adsorbent beads during the EBA process can strongly reduce the performance of the separation. So, to minimize these interactions, the mechanisms of cell adsorption on the support were investigated. Adsorption kinetics of the baker's yeast Saccharomyces cerevisiae on the anion exchanger Q Hyper Z were directly performed under real EBA operating conditions, in a lab-scale UpFront 10 column. The yeast was marketed either as rod-shaped pellets (type I yeast) or as spherical pellets (type II yeast). For both types, a complete series of experiments for determining the adsorption profile versus time was performed, varying the superficial velocity or the pH. In parallel, the surface physicochemical properties of the cells (surface charge and electron-donor and electron-acceptor components) and of the support were determined. First of all, whatever the yeast types, the relation between cell adsorption and bed expansion has been highlighted, demonstrating the important role of hydrodynamic. However, for the type II yeast cells, adsorption increased dramatically, compared to the type I, even though it was shown that both types exhibited the same surface charge. In fact, there were strong differences in the Lewis acidic and basic components of the two yeasts. These differences explain the variable affinity toward the support, which was characterized by a strong electron-donor and a weak electron-acceptor component. These observed behaviors agreed with the colloidal theory. This work demonstrates that all kinds of interaction between the cells and the support (electrostatic, Lifshitz-van der Waals, acid/base) have to be taken into account together with hydrodynamic characteristics inside the bed.     

Purification of a periplasmic enzyme by a stirred adsorbent, and by expanded and packed beds

The recovery of a recombinant !-amylase expressed in the periplasm of E. coli using packed bed, expanded bed and batch adsorption is compared. Recovery of recombinant protein using a packed bed requires complete clarification using microfiltration, resulting in loss of yield, or high speed centrifugation which reduces efficiency for viscous periplasmic feedstreams at large scale. Expanded beds ease these problems, however, low levels of cell debris and dilution of the feedstream to 5% sucrose are required to prevent particle aggregation and blockage of adaptors. Batch adsorption provides an alternative option by allowing a rapid capture step (~20 min) which removes the target protein from the feedstream thereby allowing it to be purified by further purification stages, however, the mixing of adsorbent during batch adsorption poses problems.     

Expanded bed adsorption in the purification of monoclonal antibodies: a comparison of process alternatives

Expanded bed adsorption (EBA) was examined as the initial capture/purification step in the purification of monoclonal antibodies from Chinese hamster ovary (CHO) cultures. Two process alternatives each using EBA were compared to a conventional Protein A process without EBA. One alternative used Protein A affinity EBA followed by packed-bed cation and anion-exchange steps. The other alternative used cation-exchange EBA as the capture step followed by packed-bed Protein A and anion-exchange steps. The process using Protein A EBA produced comparable purity (host cell protein, DNA, Protein A, antibody aggregate) to the conventional process. However, the Protein A EBA column showed a significant decrease in dynamic capacity with a limited number of cycles. The process using cation EBA achieved comparable levels of host cell proteins (HCP) and DNA but not antibody aggregate or leached Protein A compared to the conventional process.     

Isolation of a recombinant formate dehydrogenase by pseudo-affinity expanded bed adsorption.

Formate dehydrogenase (FDH) is an enzyme of industrial interest, which is recombinantly expressed as an intracellular protein in Escherichia coli. In order to establish an efficient and reliable purification protocol, an expanded bed adsorption (EBA) process was developed, starting from the crude bacterial homogenate. EBA process design was performed with the goal of finding operating conditions which, on one hand, allow efficient adsorption of the target protein and which, on the other hand, support the formation of a perfectly classified fluidised bed (expanded bed) in the crude feed solution. A pseudo-affinity ligand (Procion Red HE3B) was used to bind the FDH with high selectivity and reasonable capacity (maximum equilibrium capacity of 30 U/ml). Additionally, a simplified modelling approach, involving small packed beds for generation of process parameters, was employed for defining the operating conditions during sample application. In combination with extended elution studies, a process was set up, which could be scaled up to 7.5 l of adsorbent volume yielding a total amount of 100,000 U of 94% pure FDH per run. On this scale, 19 l of a benzonase-treated E. coli homogenate of 15% wet-weight (pH 7.5, 9 mS/cm conductivity) were loaded to the pseudo-affinity adsorbent (0.25 m sed. bed height, 5 x 10(-4) m/s fluid velocity). After a series of two wash steps, a particle-free eluate pool was obtained with 85% yield of FDH. This excellently demonstrates the suitability of expanded bed adsorption for efficient isolation of proteins by combining solid-liquid separation with adsorptive purification in a single unit operation.