Bioluminescence spectral and fluorescence dynamics study of the interaction of lumazine protein with the intermediates of bacterial luciferase bioluminescence

The mechanism of the shifting of the bioluminescence spectrum from the reaction of bacterial luciferase by lumazine protein is investigated by methods of fluorescence dynamics. A metastable intermediate is produced on reaction of Vibrio harveyi luciferase with FMNH2 and O2. It has an absorption maximum at 374 nm and a rotational correlation time (phi) derived from the decay of its fluorescence (maximum 500 nm) anisotropy of 90 ns (2 degrees C). Lumazine protein from Photobacterium phosphoreum has an absorption maximum at 417 nm and a fluorescence maximum at 475 nm. Lumazine protein forms a protein-protein complex with luciferase, and the complex has a phi of approximately 100 ns. A mixture of lumazine protein and the intermediate would be expected to have an average correlation time (phi av) around 100 ns, but instead, the result is anomalous. The phi av is much lower and is also wavelength dependent. For excitation at 375 nm, which is mainly absorbed in the flavin chromophore of the intermediate, phi av = 25 ns, but at 415 nm, mainly absorbed by the lumazine derivative ligand of lumazine protein, phi av approximately 50 ns. It is proposed that protein-protein complexation occurs between lumazine protein and the luciferase intermediate and that in this complex energy transfer from the flavin to the lumazine is the predominant channel of anisotropy loss. A distance of 20 A between the donor and acceptor is calculated. In the bioluminescence reaction of intermediate with tetradecanal, a fluorescent transient species is produced which is the bioluminescence emitter.(ABSTRACT TRUNCATED AT 250 WORDS)     

Purification of lumazine proteins from Photobacterium leiognathi and Photobacterium phosphoreum: bioluminescence properties

Bright strains of the marine bioluminescent bacterium Photobacterium leiognathi produce a "lumazine protein" in amounts comparable to that previously found in Photobacterium phosphoreum. New protocols are developed for the purification to homogeneity of the proteins from both species in yields up to 60%. In dimmer strains the amounts of lumazine protein in extracts are less, and also there is an accompanying shift of the bioluminescence spectral maximum to longer wavelength, 492 nm. Both types of lumazine proteins have identical fluorescence spectra, with maxima at 475 nm, so it is suggested that, whereas lumazine protein is the major emitter in bright strains, there is a second emitter also present with a fluorescence maximum at longer wavelength. The two species of lumazine protein have the same 276 nm/visible absorbance ratio, 2.2, but differ in visible maxima: P. phosphoreum, 417 nm; P. leiognathi, 420 nm. For the latter the bound lumazine has epsilon 420 = 10 100 M-1 cm-1, practically the same as in free solution. The two lumazine proteins also differ quantitatively in their effect on the in vitro bioluminescence reaction, i.e., at blue shifting the bioluminescence spectrum or altering the kinetics. The P. phosphoreum lumazine protein is more effective with its homologous luciferase or with P. leiognathi luciferase than is the lumazine protein from P. leiognathi. These differences may have an electrostatic origin.     

Dynamic fluorescence study of the interaction of lumazine protein with bacterial luciferases

The equilibrium association of lumazine protein from Photobacterium phosphoreum with luciferases from either P. phosphoreum or an aldehyde-requiring dark mutant of Vibrio harveyi is measured from changes of the rotational correlation time which is derived from the decay of the lumazine ligand's fluorescence anisotropy. The rotational correlation time of lumazine protein is 23 ns (2 degrees C, 0.25 M Pi) and is increased on addition of luciferase due to the formation of a higher molecular weight complex. The V. harveyi luciferase exhibits full competence for the association and a 1:1 stoichiometry with a Kd in the range 40-90 microM. At lower ionic strength (0.05 M Pi), the Kd increases but is reduced again by the addition of dodecanol or dimyristoyllecithin. In contrast, tetradecanal, a substrate for the bioluminescence reaction, exerts no influence on the association. The equilibration rate is found to be too slow and for both luciferases the Kd values are too high for the interaction of the native proteins to account quantitatively for the spectral shifting of the bioluminescence by lumazine protein.     

Characteristics of endogenous flavin fluorescence of Photobacterium leiognathi luciferase and Vibrio fischeri NAD(P)H:FMN-oxidoreductase.

The bioluminescent bacterial enzyme system NAD(P)H:FMN-oxidoreductase-luciferase has been used as a test system for ecological monitoring. One of the modes to quench bioluminescence is the interaction of xenobiotics with the enzymes, which inhibit their activity. The use of endogenous flavin fluorescence for investigation of the interactions of non-fluorescent compounds with the bacterial luciferase from Photobacterium leiognathi and NAD(P)H:FMN-oxidoreductase from Vibrio fischeri has been proposed. Fluorescence spectroscopy methods have been used to study characteristics of endogenous flavin fluorescence (fluorophore lifetime, the rotational correlation time). The fluorescence anisotropy behaviour of FMN has been analysed and compared to that of the enzyme-bound flavin. The fluorescence characteristics of endogenous flavin of luciferase and NAD(P)H:FMN-oxidoreductase have been shown to be applicable in studying enzymes' interactions with non-fluorescent compounds.     

Determination of rotational correlation times from deconvoluted fluorescence anisotropy decay curves. Demonstration with 6,7-dimethyl-8-ribityllumazine and lumazine protein from Photobacterium leiognathi as fluorescent indicators

The experimental and analytical protocols required for obtaining rotational correlation times of biological macromolecules from fluorescence anisotropy decay measurements are described. As an example, the lumazine protein from Photobacterium leiognathi was used. This stable protein (Mr 21 200) contains the noncovalently bound, natural fluorescent marker 6,7-dimethyl-8-ribityllumazine, which has in the bound state a long fluorescence lifetime (tau = 14 ns). Shortening of the fluorescence lifetime to 2.6 ns at room temperature was achieved by addition of the collisional fluorescence quencher potassium iodide. The shortening of tau had virtually no effect on the rotational correlation time of the lumazine protein (phi = 9.4 ns, 19 degrees C). The ability to measure biexponential anisotropy decay was tested by the addition of Photobacterium luciferase (Mr 80 000), which forms an equilibrium complex with lumazine protein. Under the experimental conditions used (2 degrees C) the biexponential anisotropy decay can best be described with correlation times of 20 and 60 ns, representing the uncomplexed and luciferase-associated lumazine proteins, respectively. The unbound 6,7-dimethyl-8-ribityllumazine itself (tau = 9 ns) was used as a model compound for determining correlation times in the picosecond time range. In the latter case rigorous deconvolution from the excitation profile was required to recover the correlation time, which was shorter (100-200 ps) than the measured laser excitation pulse width (500 ps).     

Recovery of components of fluorescence spectra of mixtures by intensity- and anisotropy decay-associated analysis: the bacterial luciferase intermediates

Reaction of FMNH2 and O2 with bacterial luciferase followed by blue light irradiation results in a product previously claimed to have the same fluorescence spectral distribution as the bioluminescence. Preparations of this "high fluorescence" intermediate, however, contain two fluorescent components, one from the intermediate and the other its breakdown product, FMN. Since the intermediate has a fluorescence lifetime of around 10 ns and a rotational correlation time in the range of 100 ns, compared to 5.0 and 0.15 ns, respectively, for the FMN, the two components can be successfully resolved from the total fluorescence by an anisotropy decay- and fluorescence decay-associated analysis employing simultaneous global computational methods. The fluorescence spectra of the intermediates from two types of luciferase were analyzed in this way; one luciferase was from Vibrio harveyi and the other was from an unusual type of V. fischeri that had an in vivo bioluminescence maximum at 505 nm, a wavelength almost 20 nm longer than that of the V. harveyi bioluminescence. For V. harveyi the true fluorescence of the intermediate is distinct from the bioluminescence, being found at a wavelength about 10 nm longer. For the type of V. fischeri examined, any difference in the two spectra is less certain. A control experiment with the dye 8-amino-1- naphthalenesulfonate bound to BSA and mixed with FMN recovered the original spectrum of the bound dye accurately.     

Dynamic fluorescence properties of bacterial luciferase intermediates

Three fluorescent species produced by the reaction of bacterial luciferase from Vibrio harveyi with its substrates have the same dynamic fluorescence properties, namely, a dominant fluorescence decay of lifetime of 10 ns and a rotational correlation time of 100 ns at 2 degrees C. These three species are the metastable intermediate formed with the two substrates FMNH2 and O2, both in its low-fluorescence form and in its high-fluorescence form following light irradiation, and the fluorescent transient formed on including the final substrate tetradecanal. For native luciferase, the rotational correlation time is 62 or 74 ns (2 degrees C) derived from the decay of the anisotropy of the intrinsic fluorescence at 340 nm or the fluorescence of bound 8-anilino-1-naphthalenesulfonic acid (470 nm), respectively. The steady-state anisotropy of the fluorescent intermediates is 0.34, and the fundamental anisotropy from a Perrin plot is 0.385. The high-fluorescence intermediate has a fluorescence maximum at 500 nm, and its emission spectrum is distinct from the bioluminescence spectrum. The fluorescence quantum yield is 0.3 but decreases on dilution with a quadratic dependence on protein concentration. This, and the large value of the rotational correlation time, would be explained by protein complex formation in the fluorescent intermediate states, but no increase in protein molecular weight is observed by gel filtration or ultracentrifugation. The results instead favor a proposal that, in these intermediate states, the luciferase undergoes a conformational change in which its axial ratio increases by 50%.     

Physical characterization of lumazine proteins from Photobacterium

The physicochemical properties of Photobacterium lumazine proteins have been investigated. The molecular weights obtained by several physical techniques are in good agreement, and the averages are 2% and 8% higher than the minimum molecular weights from amino acid and ligand content. The average molecular weights, sedimentation coefficients, and molecular radii are respectively the following: Photobacterium leiognathi lumazine protein, 21 200 +/- 300, 2.18 S, and 22.9 A; Photobacterium phosphoreum lumazine protein, 21 300 +/- 500, 2.16 S, and 23.0 A. The hydrations of the lumazine proteins, estimated in several ways, indicate less hydration for P. leiognathi than for P. phosphoreum. The frictional ratios corrected for hydration give axial ratios less than 1.3 for both lumazine proteins. These values agree with those obtained by a combination of rotational and translational frictional parameters and elimination of the common hydrated volume terms. There is insufficient area on the exterior surface to accommodate hydration when the lumzine proteins are considered as smooth-surfaced ellipsoids. The required surface area can be accommodated however by surface roughness with a minimum of 30% internal water.     

Chemical characterization of lumazine protein from Photobacterium leiognathi: comparison with lumazine protein from Photobacterium phosphoreum

The properties of lumazine proteins purified from the marine bioluminescent bacteria Photobacterium phosphoreum, a psychrophile, and Photobacterium leiognathi, a relatively thermophilic species, are compared. An accurate 1:1 stoichiometry of binding of the ligand 6,7-dimethyl-8-ribityllumazine to each lumazine protein is established by back-titration of the apoprotein with the authentic ligand, using both fluorescence and absorption measurements. Neither protein contains metal cofactors, organic phosphorus, or carbohydrate. Both proteins are anionic and hydrophilic. They each contain a single Trp residue and have blocked amino terminals but otherwise differ in amino acid composition and other properties (P. phosphoreum and P. leiognathi, respectively): Met (internal), 1, 2; Cys, 2, 1; Arg, 4, 7; pI, 4.78 and 4.83, 4.38 and 4.45; Mr, 19 750, 21 300. In the P. phosphoreum protein both Cys residues are accessible, but in the P. leiognathi protein the single Cys is "buried". Modification of this buried Cys and at least one Cys in the P. phosphoreum protein prevents binding of the ligand. The UV and visible absorption spectra of both lumazine proteins denatured in 6 M guanidine hydrochloride can be accurately modeled by using the number of equivalents of the lumazine derivative and blocked aromatic amino acid model compounds determined by chemical and spectrophotometric analyses for Trp, Tyr, and Phe.     

Time-resolved fluorescence spectroscopy of lumazine protein from Photobacterium phosphoreum using synchrotron radiation

Time-resolved fluorescence on lumazine protein from Photobacterium phosphoreum was performed with synchrotron radiation as a source of continuously tunable excitation. The experiments yielded structural and dynamic details from which two aspects became apparent. From fluorescence anisotropy decay monitoring of lumazine fluorescence with different excitation wavelengths, the average correlation times were shown to change, which must indicate the presence of anisotropic motion of the protein. A similar study with 7-oxolumazine as the fluorescent ligand led to comparable results. The other remarkable observation dealt with the buildup of acceptor fluorescence, also observed with 7-oxolumazine although much less pronounced, which is caused by the finite energy transfer process between the single donor tryptophan and the energy accepting lumazine derivatives. Global analytical approaches in data analysis were used to yield realistic correlation times and reciprocal transfer rate constants. It was found that the tryptophan residue has a large motional freedom as also reported previously for this protein and for the related protein from P. leiognathi (Lee et al. 1985; Kulinski et al. 1987). The average distance between the tryptophan residue and the ligand donor-acceptor couple has been determined to be 2.7 nm for the same donor and two different acceptors.     

Green-fluorescent protein from the bioluminescent jellyfish Clytia gregaria is an obligate dimer and does not form a stable complex with the Ca(2+)-discharged photoprotein clytin

Green-fluorescent protein (GFP) is the origin of the green bioluminescence color exhibited by several marine hydrozoans and anthozoans. The mechanism is believed to be Fo?rster resonance energy transfer (FRET) within a luciferase-GFP or photoprotein-GFP complex. As the effect is found in vitro at micromolar concentrations, for FRET to occur this complex must have an affinity in the micromolar range. We present here a fluorescence dynamics investigation of the recombinant bioluminescence proteins from the jellyfish Clytia gregaria, the photoprotein clytin in its Ca(2+)-discharged form that is highly fluorescent (λ(max) = 506 nm) and its GFP (cgreGFP; λ(max) = 500 nm). Ca(2+)-discharged clytin shows a predominant fluorescence lifetime of 5.7 ns, which is assigned to the final emitting state of the bioluminescence reaction product, coelenteramide anion, and a fluorescence anisotropy decay or rotational correlation time of 12 ns (20 °C), consistent with tight binding and rotation with the whole protein. A 34 ns correlation time combined with a translational diffusion constant and molecular brightness from fluorescence fluctuation spectroscopy all confirm that cgreGFP is an obligate dimer down to nanomolar concentrations. Within the dimer, the two chromophores have a coupled excited-state transition yielding fluorescence depolarization via FRET with a transfer correlation time of 0.5 ns. The 34 ns time of cgreGFP showed no change upon addition of a 1000-fold excess of Ca(2+)-discharged clytin, indicating no stable complexation below 0.2 mM. It is proposed that any bioluminescence FRET complex with micromolar affinity must be one formed transiently by the cgreGFP dimer with a short-lived (millisecond) intermediate in the clytin reaction pathway.     

The lux genes of the luminous bacterial symbiont, Photobacterium leiognathi, of the ponyfish. Nucleotide sequence, difference in gene organization, and high expression in mutant Escherichia coli

The lux genes required for light expression in the luminescent bacterium Photobacterium leiognathi (ATCC 25521) have been cloned and expressed in Escherichia coli and their organization and nucleotide sequence determined. Transformation of a recombinant 9.5-kbp chromosomal DNA fragment of P. leiognathi into an E. coli mutant (43R) gave luminescent colonies that were as bright as those of the parental strain. Moreover, expression of the lux genes in the mutant E. coli was strong enough so that not only were high levels of luciferase detected in crude extracts, but the fatty-acid reductase activity responsible for synthesis of the aldehyde substrate for the luminescent reaction could readily be measured. Determination of the 7.3-kbp nucleotide sequence of P. leiognathi DNA, including the genes for luciferase (luxAB) and fatty-acid reductase (luxCDE) as well as a new lux gene (luxG) found recently in luminescent Vibrio species, showed that the order of the lux genes was luxCDABEG. Moreover, luxF, a gene homologous to luxB and located between luxB and luxE in Photobacterium but not Vibrio strains, was absent. In spite of this different lux gene organization, an intergenic stem-loop structure between luxB and luxE was discovered to be highly conserved in other Photobacterium species after luxF.     

Spectral properties and function of two lumazine proteins from Photobacterium

The spectral properties are compared for two 6,7-dimethyl-8-ribityllumazine proteins from marine bioluminescent bacteria, one from a psychrophile, Photobacterium phosphoreum, and the other from a thermophile, Photobacterium leiognathi. The visible spectral properties, which are the ones by which the protein performs its biological function of bioluminescence emission, are almost the same for the two proteins: at 2 degrees C and 50 mM Pi, pH 7, fluorescence quantum yield phi F = 0.59 and 0.54, respectively; fluorescence lifetime tau = 14.4 and 14.8 ns, respectively; fluorescence maxima, both 475 nm; absorption maximum, 417 and 420 nm, respectively; circular dichroism minima at around 420 nm, both -41 X 10(3) deg cm2 dmol-1. The ligand binding sites therefore must provide very similar environments, and arguments are presented that the bound ligand is relatively exposed to solvent. The dissociation equilibrium was studied by steady-state fluorescence polarization. The thermophilic protein binds the ligand with Kd (20 degrees C) = 0.016 microM, 10 times more tightly than the other protein [Kd (20 degrees C) = 0.16 microM]. The origin of the binding difference probably resides in differences in secondary structure. The tryptophan fluorescence spectra of the two proteins are different, but more significant is an observation of the decay of the tryptophan emission anisotropy. For the psychrophilic lumazine protein this anisotropy decays to zero in 1 ns, implying that its single tryptophan residue lies in a very "floppy" region of the protein. For the other protein, the anisotropy exhibits both a fast component and a slow one corresponding to rotation of the protein as a whole.(ABSTRACT TRUNCATED AT 250 WORDS)     

Relationship between the redox change in yellow fluorescent protein of Vibrio fischeri strain Y1 and the reversible change in color of bioluminescence in vitro.

To elucidate the reversible change in the color of bioluminescence (BL) arising from Vibrio fischeri Y1, the relationship between the BL color and the redox state of endogenous yellow fluorescent protein (YFP), carrying riboflavin 5'-phosphate (FMN), has been investigated in vitro. YFP lost fluorescence with a maximum at 538 nm when reduced, and retrieved its original fluorescence upon reoxidation. Such a change in YFP fluorescence was analogous to that of free FMN. In the NADH/FMN oxidoreductase-coupled luciferase reaction with YFP, yellow BL peaking around 535 nm was largely depressed when sodium dithionite was added. This phenomenon can be attributed to the reduction of YFP; i.e., reduced YFP does not participate in the luciferase reaction as a secondary emitter. On admitting air into the reaction mixture, the yellow light characteristic of V. fischeri Y1 BL was regenerated. These results indicate that the reversible change in YFP fluorescence is caused by the redox change of YFP-bound FMN, and that the change in BL color between blue and yellow is associated with the redox state of YFP.     

Structural studies on bacterial luciferase using energy transfer and emission anisotropy.

The distance between specific sites on bacterial luciferase was estimated by energy transfer. Luciferase was fluorescently labeled by reaction of an essential sulfhydryl group with N-(1-pyrene)maleimide and N-[p-(2-benzoxazolyl)phenyl]meleimide. Both of the modified enzymes bind 8-anilino-1-naphthalenesulfonate (Ans) with affinities similar to that exhibited by the native luciferase. Using each of the two fluorescent probes as a donor and the bound Ans as an acceptor, the energy transfer efficiencies were determined by the resulting enhancement of fluorescence of the acceptor. The corresponding distance was calculated to be in the range of 21 to 37 A. Energy-transfer studies were also carried out using fluorescence lifetime measurements of bound ANS, acting as a donor with bound FMN as an acceptor. The corresponding distance was calculated to be between 30 and 58 A. Using samples of luciferase:Ans complex and luciferase modified with N-(1-pyrene)maleimide, the rotational correlation time of the enzyme-dye conjugate as awhole was found to be 47 +/- 2 ns. The observed rotational correlation time is much longer than that calculated for luciferase assuming a spherical structure, thus indicating an elongated form for the luciferase-dye conjugate.     

Action of phenobarbital on bacterial luciferase of Photobacterium fischeri

The effect of phenobarbital, a typical substrate of monooxygenases from higher organisms, on bioluminescence of the marine bacterium Photobacterium fischeri and bacterial luciferase was studied. Phenobarbital was shown to be an effective quenching agent owing to the interaction with cytochrome P-450, a terminal luciferase component. A competitive interrelation was found between phenobarbital and an aliphatic aldehyde, the substrate of the luminescent reaction.     

Spectroscopic investigations of the single tryptophan residue and of riboflavin and 7-oxolumazine bound to lumazine apoprotein from Photobacterium leiognathi

Spectroscopic techniques have been applied to investigate the conformation, local structure, and dynamic properties of the apoprotein of the lumazine protein from Photobacterium leiognathi and the holoprotein reconstituted with either the natural ligand 6,7-dimethyl-8-ribityllumazine or the closely related analogues riboflavin and 6-methyl-7-oxo-8-ribityllumazine (7-oxolumazine). The analogues are bound similarly to the natural prosthetic group. They exhibit similar shifts on binding in their absorption and fluorescence spectra, single-exponential fluorescence decays, and no independent motion from the protein as evident from a long-lived anisotropy decay (single-exponential phi = 10 ns, 20 degrees C) and high initial anisotropy. Steady-state anisotropy measurements result in similar KD's (40 nM, 20 degrees C, 50 mM inorganic phosphate) for all ligands. Circular dichroism in the far-UV region (190-250 nm) indicates no change in secondary structure on binding to the apoprotein. In the spectral region of 250-310 nm relatively large changes occur, indicating changes in the environment of the tyrosine and tryptophan residues. The single tryptophan residue shows a three-exponential decay of its fluorescence in both the apoprotein and the holoprotein. Radiationless energy transfer also occurs from the tryptophan to the bound ligand, especially evident with 7-oxolumazine. We have designed a new method for evaluation of the rate constant of energy transfer by measuring the (picosecond) rise time of the acceptor fluorescence. The anisotropy decay of the tryptophan residue shows two correlation times, a short one (phi approximately equal to 0.4 ns) representing rapid but restriced oscillation of this residue and a longer one (phi 2 = 5-7 ns, 20 degrees C) representing the motion of a larger segment of the protein.     

Purification of the yellow fluorescent protein from Vibrio fischeri and identity of the flavin chromophore

A low molecular weight protein (approximately 25,000 D) exhibiting a yellow fluorescence emission peaking at approximately 540 nm was isolated from Vibrio fischeri (strain Y-1) and purified to apparent homogeneity. FMN is the chromophore, but it exhibits marked red shifts in both the absorption (lambda max = 380, 460 nm) and the fluorescence emission. When added to purified luciferase from the same strain, which itself catalyzes an emission of blue-green light (lambda max approximately 495 nm), this protein induces a bright yellow luminescence (lambda max approximately 540 nm); this corresponds to the emission of the Y-1 strain in vivo. This yellow bioluminescence emission is thus ascribed to the interaction of these two proteins, and to the excitation of the singlet FMN bound to this fluorescent protein.     

Lumazine proteins from photobacteria: localization of the single ligand binding site to the N-terminal domain

Lumazine protein is believed to serve as an optical transponder in bioluminescence emission by certain marine bacteria. Sequence arguments suggest that the protein comprises two similarly folded riboflavin synthase-type domains, but earlier work also suggested that only one domain binds 6,7-dimethyl-8-ribityllumazine (DMRL). We show that the replacement of serine-48 or threonine-50 in the N-terminal domain of lumazine protein of Photobacterium leiognathi modulates the absorbance and fluorescence properties of bound DMRL or riboflavin. Moreover, the replacement of these amino acids is accompanied by reduced ligand affinity. Replacement of serine-48 by tryptophan shifts the (13)C NMR signal of the 6-methyl group in bound DMRL upfield by 2.9 ppm as compared to the wild-type protein complex. Replacement of threonine-50 causes a downfield shift of approximately 20 ppm for the (15)N NMR signal of N-5, as well as an upfield shift of 3 ppm for the (13)C NMR signal of C-7 in bound DMRL, respectively. The replacement of the topologically equivalent serine-144 and proline-146 in the C-terminal domain had no significant impact on optical properties, chemical shifts and apparent binding constants of bound DMRL. These data show that the N-terminal domain is the unique site for ligand binding in lumazine protein.     

Effect of quinone on the fluorescence decay dynamics of endogenous flavin bound to bacterial luciferase

The interaction of quinone with luciferase from Photobacterium leiognathi was studied based on the fluorescence decay measurements of the endogenous flavin bound to the enzyme. Homologous 1,4-quinones, 1,4-benzoquinone, methyl-1,4-benzoquinone, 2-methyl-5-isopropyl-1,4-benzoquine and 1,4-naphthoquinone, were investigated. In the absence of quinone, the fluorescence intensity and anisotropy decays of the endogenous flavin exhibited two intensity decay lifetimes (~ 1 and 5 ns) and two anisotropy decay lifetimes (~ 0.2 and 20 ns), suggesting a heterogeneous quenching and a rotational mobility microenvironment of the active site of the luciferase, respectively. In the presence of quinone, the intensity decay heterogeneity was largely maintained, whereas the fraction of the short anisotropy decay component and the averaged rotational rate of FMN increased with the increasing hydrophobicity of the quinone. We hypothesize that the hydrophobicity of the quinone plays a role in the non-specific inhibition mechanism of xenobiotic molecules in the bacterial bioluminescence system via altering the rotational mobility of the endogenous flavin in the luciferase.