Synthesis,characterization and preliminary analysis of in vivo biological activity of chitosan/celecoxib microcapsules

The use of chitosan as the wall of microcapsule designed for delivery of encapsulated celecoxib is reported. Microcapsules were characterised with respect to size and encapsulation efficiency of celecoxib. In vivo animals demonstrated that both free celecoxib administration and chitosan/celecoxib microcapsules administration lead to a significant inhibition of cyclooxygenase-2 protein expression in the hepatocytes when compared with vehicle control mice. Interestingly, microcapsule containing celecoxib showed a better inhibition of cyclooxygenase-2 protein expression when compared with a simple oral administration of free celecoxib. Gas-chromatography–mass-spectrometry analysis showed that in mice treated with free celecoxib or chitosan/celecoxib microcapsules, their plasma concentration of celecoxib was similar. Microcapsules-based biomaterials as oral drug delivery vehicles may help to improve the absorption efficiency of therapeutic drugs.     

Chitosan microcapsules loaded with either miconazole nitrate or clotrimazole,prepared via emulsion technique

In this paper, a simple and versatile coacervation technique has been developed by using an ultrasound-assisted oil/water emulsion method for the preparation of antifungal agent-loaded microcapsules. Two types of chitosan microcapsules are successfully prepared. The mean particle size of the chitosan/miconazole nitrate microcapsules is 2.6 μm and that of the chitosan/clotrimazole microcapsules is 4.1 μm. The encapsulation efficiency of the chitosan/miconazole nitrate microcapsules (77.58–96.81%) is relatively higher than that of the chitosan/clotrimazole microcapsules (56.66–93.82%). The in vitro drug release performance of the microcapsules shows that the chitosan/miconazole nitrate microcapsules release about 49.5% of the drug while chitosan/clotrimazole microcapsules release more than 66.1% of the drug after 12 h under a pressure of 5 kg at pH 5.5, which is similar to the pH of human skin. The prepared drug-loaded microcapsules could be applied onto bandages or socks, and will continuously release antifungal drugs in a controlled manner under pressure.     

Pectin-coated chitosan microgels crosslinked on superhydrophobic surfaces for 5-fluorouracil encapsulation

5-Fluorouracil (5-FU)-loaded chitosan microgels for oral and topical chemotherapy were prepared applying a superhydrophobic surface-based encapsulation technology. Drug-loaded chitosan dispersions were cross-linked and then coated with drug-free chitosan or pectin layers at the solid-air interface in a highly efficient and environment-friendly way. The size of the microgels (with diameters of ca. 280 and 557 μm for the chitosan seeds and pectin-coated microgels respectively) was the lowest obtained until now using similar biomimetic methodologies. The microgels were characterized regarding 5-FU release profiles in vitro in aqueous media covering the pH range of the gastrointestinal tract, and cytotoxicity against two cancer cell lines sensitive to 5-FU. Owing to their control of 5-FU release in acidic medium, calcium pectinate-coated microgels can be considered as suitable for oral administration. Growth inhibition of cancer cells by 5-FU was greater when incorporated to chitosan microgels; these being potentially useful for treatment of skin and colorectal tumors.     

5-FU壳聚糖-阿拉伯胶缓释微囊的制备工艺研究

研究以壳聚糖和阿拉伯胶为基质材料,制备5-FU缓释微囊.以微囊的药物包封率为制备工艺优化指标,利用复凝聚法,通过L_9(3~4)正交实验得出微囊的最佳制备工艺条件.以最佳制备工艺条件制备的5-FU缓释微囊,所制微囊形态及稳定性较好.体外释放研究表明,微囊有良好的缓释效果.     

Design and Evaluation of the Release Characteristics of Caffeine-Loaded Microcapsules in a Medicated Chewing Gum Formulation

The aim of this study was to microencapsulate caffeine by the emulsion technique, trying to control its release from a medicated chewing gum. Three formulations were prepared using alginate, alginate-starch, and alginate-starch with chitosan coating as the wall materials. These microcapsules were characterized with regard to the morphology studied by using an optical microscope and scanning electron microscopy (SEM), particle size, and encapsulation efficiency. The microcapsules were then incorporated into the chewing gums. The chewing gums were characterized by thermal behavior (by differential scanning calorimetry [DSC]), texture profile analysis [TPA], and sensory evaluation. Furthermore, the release of caffeine from the chewing gum was studied in vitro using the masticatory simulator and in vivo by a chew-out study. The microcapsules revealed a spherical form and high encapsulation efficiency, representing the success of the technique. The outcomes indicated that it is possible to encapsulate caffeine with the techniques employed and the microcapsules prolonged the release of caffeine throughout mastication. The chewing gum containing alginate-starch with chitosan-coated microcapsules showed the great potential of the microcapsule in controlling the release of the caffeine from the chewing gum, thereby delaying its bitterness.     

海藻酸钠漂浮微囊的制备以及载药应用研究

目的:本文研究了一种海藻酸钠漂浮微囊的制备方法用以实现胃部持续给药。方法:采用微胶囊发生器制备海藻酸钠漂浮微囊,壁材为海藻酸钠,芯材为食用油的漂浮微囊,衡量不同的制备参数对微囊的理化特性影响;采用克拉霉素作为模型脂溶性药物,测量漂浮药物递送系统的控制释放性质、以及微囊载药特性和小鼠体内漂浮验证。结果:成功制备出了具有漂浮特性的海藻酸钠微囊,其中泵送速度对微囊性质的影响最大。制备出的微囊具有低细胞毒性,可以实现90%的药物包埋率。此外,微囊可以在小鼠的胃中保存超过6小时,具有良好的漂浮特性。结论:海藻酸钠漂浮微囊是一种有效的胃部药物递送系统,可明显延长药物在胃部的滞留时间。     

Lipospheres as Carriers for Topical Delivery of Aceclofenac: Preparation,Characterization and <Emphasis Type="BoldItalic">In Vivo</Emphasis> Evaluation

The purpose of this study was to prepare lipospheres containing aceclofenac intended for topical skin delivery with the aim of exploiting the favorable properties of this carrier system and developing a sustained release formula to overcome the side effects resulting from aceclofenac oral administration. Lipospheres were prepared using different lipid cores and phospholipid coats adopting melt and solvent techniques. Characterization was carried out through photomicroscopy, scanning electron microscopy, particle size analysis, DSC, In vitro drug release and storage study. The anti-inflammatory effect of liposphere systems was assessed by the rat paw edema technique and compared to the marketed product. Results revealed that liposphere systems were able to entrap aceclofenac at very high levels (93.1%). The particle size of liposphere systems was well suited for topical drug delivery. DSC revealed the molecular dispersion of aceclofenac when incorporated in lipospheres. Both entrapment efficiency and release were affected by the technique of preparation, core and coat types, core to coat ratio and drug loading. Lipospheres were very stable after 3 months storage at 2–8°C manifested by low leakage rate (less than 7%) and no major changes in particle size. Finally, liposphere systems were found to possess superior anti-inflammatory activity compared to the marketed product in both lotion and paste consistencies. Liposphere systems proved to be a promising topical system for the delivery of aceclofenac as they possessed the ability to entrap the drug at very high levels and high stability, and to sustain the anti-inflammatory effect of the drug.     

Development of phyllanthin containing microcapsules and their improved biological activity towards skin cells and Staphylococcus aureus

Chitosan based microcapsule which encapsulated with phyllanthin was developed by simple coacervation. The composition and surface morphology of phyllanthin containing microcapsules were analyzed by Fourier Transform Infrared spectroscopy and Scanning Electron Microscopy, respectively. The release of phyllanthin from the microcapsules was found to be more than 60% after 120 h. In vitro biological assays demonstrated that these phyllanthin containing microcapsules showed a stronger anti-oxidation potential on both human fibroblasts and keratinocytes as well as a better growth inhibitory activity towards Staphylococcus aureus.     

Modulating Drug Release from Gastric-Floating Microcapsules through Spray-Coating Layers

Floating dosage forms with prolonged gastric residence time have garnered much interest in the field of oral delivery. However, studies had shown that slow and incomplete release of hydrophobic drugs during gastric residence period would reduce drug absorption and cause drug wastage. Herein, a spray-coated floating microcapsule system was developed to encapsulate fenofibrate and piroxicam, as model hydrophobic drugs, into the coating layers with the aim of enhancing and tuning drug release rates. Incorporating fenofibrate into rubbery poly(caprolactone) (PCL) coating layer resulted in a complete and sustained release for up to 8 h, with outermost non-drug-holding PCL coating layer serving as a rate-controlling membrane. To realize a multidrug-loaded system, both hydrophilic metformin HCl and hydrophobic fenofibrate were simultaneously incorporated into these spray-coated microcapsules, with metformin HCl and fenofibrate localized within the hollow cavity of the capsule and coating layer, respectively. Both drugs were observed to be completely released from these coated microcapsules in a sustained manner. Through specific tailoring of coating polymers and their configurations, piroxicam loaded in both the outer polyethylene glycol and inner PCL coating layers was released in a double-profile manner (i.e. an immediate burst release as the loading dose, followed by a sustained release as the maintenance dose). The fabricated microcapsules exhibited excellent buoyancy in simulated gastric fluid, and provided controlled and sustained release, thus revealing its potential as a rate-controlled oral drug delivery system.     

Development of pH-sensitive Insulin Nanoparticles using Eudragit L100-55 and Chitosan with Different Molecular Weights

Insulin is a polypeptide hormone and usually administered for treatment of diabetic patients subcutaneously. The aim of this study was to investigate the efficiency of enteric nanoparticles for oral delivery of insulin. Nanoparticles were formed by complex coacervation method using chitosan of various molecular weights. Nanoparticles were characterized by drug loading efficiency determination, particle size analysis, Scanning Electron Microscopy (SEM), Zeta potential and CD spectroscopy (Circular Dichrosim). The in vitro release studies were performed at pH 1.2 and 7.4. The drug loaded nanoparticles showed 3.38% of entrapment, loading efficiency of 30.56% and mean particle size of 199 nm. SEM studies showed that the nanoparticles are non-spherical. Zeta potential increased with increasing molecular weight of chitosan. The CD spectroscopy profiles indicated that the nano-encapsulation process did not significantly disrupt the internal structure of insulin; additionally, pH-sensitivity of nanoparticles was preserved and the insulin release was pH-dependent. These results suggest that the complex coacervation process using chitosan and Eudragit L100-55 polymers may provide a useful approach for entrapment of hydrophilic polypeptides without affecting their conformation.     

Development of alginate-reinforced chitosan nanoparticles utilizing W/O nanoemulsification/internal crosslinking technique for transdermal delivery of rabeprazole

Aims

First; to develop rabeprazole (RP)-alginate core coated chitosan nanoparticles (NP) utilizing water in oil (W/O) nanoemulsion technique. Second; formulation of transdermal patches loaded RP-NP that avoid drug peroral acid sensitivity and first pass effect.

Main methods

The influence of six factors on RP-NP formulation was investigated using Plackett–Burman (PB) design. The studied factors were considered for their effect on particle size (Y1) and loading efficiency (Y2). Formulation optimum desirability was identified; a proposed formulation was prepared and characterized. In vitro permeation of the prepared NP compared with RP was studied. Transdermal patches loaded drug or RP-NP were prepared and characterized. Patches ex vivo permeation through rat skin was studied, and kinetic analysis and permeation mechanism were investigated.

Key Finding

Chitosan, oil phase and surfactant to oil ratios had significant effects on Y1, while Y2 was significantly affected by the same variables affecting Y1 and span80-tween80 ratio. Scanning electron microscope imaging illustrated sphericity of the NP. The optimized RP-NP exhibited sustained release pattern. The prepared patches showed a minimal patch to patch variable. Patches loaded RP-NP exhibited substantial skin permeability and controlled drug release, and were in favor of Fickian diffusion.

Significance

Transdermal patches loaded RP-NP is effective drug delivery and alternative to drug peroral route.     

Enhanced skin deposition and delivery of voriconazole using ethosomal preparations

Despite its broad-spectrum antifungal properties, voriconazole has many side effects when administered systemically. The aim of this work was to develop an ethosomal topical delivery system for voriconazole and test its potential to enhance the antifungal properties and skin delivery of the drug. Voriconazole was encapsulated into various ethosomal preparations and the effect of phospholipid and ethanol concentrations on the ethosomes properties were evaluated. The ethosomes were evaluated for drug encapsulation efficiency, particle size and morphology and antifungal efficacy. Drug permeability and deposition were tested in rat abdominal skin. Drug encapsulation efficiency of up to 46% was obtained and it increased with increasing the phospholipid concentration, whereas the opposite effect was observed for the ethanol concentration. The ethosomes had a size of 420–600?nm and negative zeta potential. The particle size of the ethosomes increased by increasing their ethanol content. The ethosomes achieved similar inhibition zones against Aspergillus flavus at a 2-fold lower drug concentration compared with drug solution in dimethyl sulfoxide. The ex vivo drug permeability through rat abdominal skin was ～6-fold higher for the ethosomes compared with the drug hydroalcoholic solution. Similarly, the amount of drug deposited in the skin was higher for the ethosomes and was dependent on the ethanol concentration of the ethosomes. These results confirm that voriconazole ethosomal preparations are promising topical delivery systems that can enhance the drug antifungal efficacy and improve its skin delivery.     

Preparation and characterization of novel polymeric microcapsules for live cell encapsulation and therapy

This article describes the preparation and in vitro characterization of novel genipin cross-linked alginate-chitosan (GCAC) microcapsules that have potential for live cell therapy applications. This microcapsule system, consisting of an alginate core with a covalently cross-linked chitosan membrane, was formed via ionotropic gelation between calcium ions and alginate, followed by chitosan coating by polyelectrolyte complexation and covalent cross-linking of chitosan by naturally derived genipin. Results showed that, using this design concept and the three-step procedure, spherical GCAC microcapsules with improved membrane strength, suppressed capsular swelling, and suitable permeability can be prepared. The suitability of this novel membrane formulation for live cell encapsulation was evaluated, using bacterial Lactobacillus plantarum 80 (pCBH1) (LP80) and mammalian HepG2 as model cells. Results showed that capsular integrity and bacterial cell viability were sustained 6 mo postencapsulation, suggesting the feasibility of using this microcapsule formulation for live bacterial cell encapsulation. The metabolic activity of the encapsulated HepG2 was also investigated. Results suggested the potential capacity of this GCAC microcapsule in cell therapy and the control of cell signaling; however, further research is required.     

Complex Coacervates Formed between Whey Protein Isolate and Carboxymethylcellulose for Encapsulation of β-Carotene from Sacha Inchi Oil: Stability,In Vitro Digestion and Release Kinetics

The present work aimed to study the influence of the pH and protein ratio on the formation of complex coacervates of carboxymethylcellulose (CMC) and whey protein isolated nanoparticles (WPIN). These biopolymers and transglutaminase, as a cross-linking agent, were used to encapsulate sacha inchi oil (SIO) containing β-carotene (β-C). The stability of β-C from SIO microcapsules (β-SIO microcapsules) was evaluated under in vitro digestion using an INFOGEST 2.0 in vitro digestion protocol. The release of β-C in a simulated food model was studied, and mathematical models were used to determine the mechanism. A ratio of 1:6 (CMC/WPIN) at pH 3.5 was used for the formation of the complex. Chemical and morphological analyses suggested that SIO was microencapsulated and that a high encapsulation efficiency was obtained. The β-C from β-SIO microcapsules was preserved in vegetable oil (food model), and Fickian diffusion occurred. The β-C from β-SIO microcapsules was preserved under oral and gastric conditions, and higher release occurred during intestinal digestion when samples were subjected to in vitro digestion simulation. After in vitro digestion, the β-C from β-SIO microcapsules presented higher stability (83.37%) and acceptable bioaccessibility (31.16%). There are few studies in the literature of encapsulated SIO using the CMC/WPIN complex or studies of the release of β-carotene from SIO during in vitro digestion and in food simulants. The knowledge obtained in this study will facilitate the use and applications of β-C-loaded microcapsule delivery systems.

     

Two-stage optimization process for formulation of chitosan microspheres

The objective of the present study was to optimize the concentration of a chitosan solution, stirring speed, and concentration of drugs having different aqueous solubility for the formulation of chitosan microspheres. Chitosan microspheres (unloaded and drug loaded) were prepared by the chemical denaturation method and were subjected to measurement of morphology, mean particle size, particle size distribution, percentage drug entrapment (PDE), drug loading, and drug release (in vitro). Morphology of the microspheres was dependent on the level of independent process parameters. While mean particle size of unloaded microspheres was found to undergo significant change with each increase in concentration of chitosan solution, the stirring rate was found to have a significant effect only at the lower level (ie, 2000 to 3000 rpm). Of importance, spherical unloaded microspheres were also obtained with a chitosan solution of concentration less than 1 mg/mL. Segregated unloaded microspheres with particle size in the range of 7 to 15 microm and mean particle size of 12.68 microm were obtained in the batch prepared by using a chitosan solution of 2 mg/mL concentration and stirring speed of 3000 rpm. The highest drug load ( microg drug/mg microspheres) was 50.63 and 13.84 for microspheres containing 5-fluorouracil and methotrexate, respectively. While the release of 5-fluorouracil followed Higuchi's square-root model, methotrexate released more slowly with a combination of first-order kinetics and Higuchi's square-root model. The formation of chitosan microspheres is helped by the use of differential stirring. While an increase in the concentration of water-soluble drug may help to increase PDE and drug load over a large concentration range, the effect is limited in case of water-insoluble drugs.     

Preparation and Evaluation of Miconazole Nitrate-Loaded Solid Lipid Nanoparticles for Topical Delivery

The purpose of this study was to prepare miconazole nitrate (MN) loaded solid lipid nanoparticles (MN-SLN) effective for topical delivery of miconazole nitrate. Compritol 888 ATO as lipid, propylene glycol (PG) to increase drug solubility in lipid, tween 80, and glyceryl monostearate were used as the surfactants to stabilize SLN dispersion in the SLN preparation using hot homogenization method. SLN dispersions exhibited average size between 244 and 766 nm. All the dispersions had high entrapment efficiency ranging from 80% to 100%. The MN-SLN dispersion which showed good stability for a period of 1 month was selected. This MN-SLN was characterized for particle size, entrapment efficiency, and X-ray diffraction. The penetration of miconazole nitrate from the gel formulated using selected MN-SLN dispersion as into cadaver skins was evaluated ex-vivo using franz diffusion cell. The results of differential scanning calorimetry (DSC) showed that MN was dispersed in SLN in an amorphous state. The MN-SLN formulations could significantly increase the accumulative uptake of MN in skin over the marketed gel and showed a significantly enhanced skin targeting effect. These results indicate that the studied MN-SLN formulation with skin targeting may be a promising carrier for topical delivery of miconazole nitrate.     

Targeted Anticancer Drug Delivery Using Chitosan,Carbon Quantum Dots,and Aptamers to Deliver Ganoderic Acid and 5-Fluorouracil

Breast cancer is a malignancy that affects mostly females and is among the most lethal types of cancer. The ligand-functionalized nanoparticles used in the nano-drug delivery system offer enormous potential for cancer treatments. This work devised a promising approach to increase drug loading efficacy and produce sustained release of 5-fluorouracil (5-FU) and Ganoderic acid (GA) as model drugs for breast cancer. Chitosan, aptamer, and carbon quantum dot (CS/Apt/COQ) hydrogels were initially synthesized as a pH-sensitive and biocompatible delivery system. Then, CS/Apt/COQ NPs loaded with 5-FU-GA were made using the W/O/W emulsification method. FT-IR, XRD, DLS, zeta potentiometer, and SEM were used to analyze NP's chemical structure, particle size, and shape. Cell viability was measured using MTT assays in vitro using the MCF-7 cell lines. Real-time PCR measured cell apoptotic gene expression. XRD and FT-IR investigations validated nanocarrier production and revealed their crystalline structure and molecular interactions. DLS showed that nanocarriers include NPs with an average size of 250.6 nm and PDI of 0.057. SEM showed their spherical form, and zeta potential studies showed an average surface charge of +37.8 mV. pH 5.4 had a highly effective and prolonged drug release profile, releasing virtually all 5-FU and GA in 48 h. Entrapment efficiency percentages for 5-FU and GA were 84.7±5.2 and 80.2 %±2.3, respectively. The 5-FU-GA-CS-CQD-Apt group induced the highest cell death, with just 57.9 % of the MCF-7 cells surviving following treatment. 5-FU and GA in CS-CQD-Apt enhanced apoptotic induction by flow cytometry. 5-FU-GA-CS-CQD-Apt also elevated Caspase 9 and downregulated Bcl2. Accordingly, the produced NPs may serve as pH-sensitive nano vehicles for the controlled release of 5-FU and GA in treating breast cancer.     

5-Fluorouracil Nanoparticles Inhibit Hepatocellular Carcinoma via Activation of the p53 Pathway in the Orthotopic Transplant Mouse Model

Biodegradable polymer nanoparticle drug delivery systems provide targeted drug delivery, improved pharmacokinetic and biodistribution, enhanced drug stability and fewer side effects. These drug delivery systems are widely used for delivering cytotoxic agents. In the present study, we synthesized GC/5-FU nanoparticles by combining galactosylated chitosan (GC) material with 5-FU, and tested its effect on liver cancer in vitro and in vivo. The in vitro anti-cancer effects of this sustained release system were both dose- and time-dependent, and demonstrated higher cytotoxicity against hepatic cancer cells than against other cell types. The distribution of GC/5-FU in vivo revealed the greatest accumulation in hepatic cancer tissues. GC/5-FU significantly inhibited tumor growth in an orthotropic liver cancer mouse model, resulting in a significant reduction in tumor weight and increased survival time in comparison to 5-FU alone. Flow cytometry and TUNEL assays in hepatic cancer cells showed that GC/5-FU was associated with higher rates of G0–G1 arrest and apoptosis than 5-FU. Analysis of apoptosis pathways indicated that GC/5-FU upregulates p53 expression at both protein and mRNA levels. This in turn lowers Bcl-2/Bax expression resulting in mitochondrial release of cytochrome C into the cytosol with subsequent caspase-3 activation. Upregulation of caspase-3 expression decreased poly ADP-ribose polymerase 1 (PARP-1) at mRNA and protein levels, further promoting apoptosis. These findings indicate that sustained release of GC/5-FU nanoparticles are more effective at targeting hepatic cancer cells than 5-FU monotherapy in the mouse orthotropic liver cancer mouse model.     

Swelling behaviour of alginate–chitosan microcapsules prepared by external gelation or internal gelation technology

Swelling behaviour is one of the important properties for microcapsules made by hydrogels, which always affects the diffusion and release of drugs when the microcapsules are applied in drug delivery systems. In this paper, alginate–chitosan microcapsules were prepared by different technologies called external or internal gelation process respectively. With the volume swelling degree (S_w) as an index, the effect of properties of chitosan on the swelling behaviour of both microcapsules was investigated. It was demonstrated that the microcapsules with low molecular weight and high concentration of chitosan gave rise to low S_w. Considering the need of maintaining drug activity and drug loading, neutral pH and short gelation time were favorable. It was also noticed that S_w of internal gelation microcapsules was lower than that of external gelation microcapsules, which was interpreted by the structure analysis of internal or external gelation Ca–alginate beads with the aid of confocal laser scanning microscope.     

Preparation and pharmacodynamics of low-molecular-weight chitosan nanoparticles containing insulin

Low-molecular-weight chitosan (LMWC) was obtained by enzymatic degradation and ultrafiltration separation. LMWC nanoparticles with LMWC having 20 kDa weight average molecular weight (M_w) were then prepared by solvent evaporation method. The resultant nanoparticles were spherical with a narrow particle size distribution. LMWC nanoparticles loaded with insulin as a model drug were prepared. The average entrapment efficiency of insulin could reach up to 95.54%. The in vitro drug release profiles from the nanoparticles showed an initial burst of release in the first 2 h, followed by zero order release kinetics. In vivo pharmacodynamics of chitosan nanoparticles containing insulin showed that the nanoparticles showed some hypoglycemic activity. Compared with an insulin solution, a relative bioavailability of 0.737 was observed for four times the dosage of insulin in the chitosan nanoparticles after pulmonary administration.