Electrical effects on the proliferation of living HeLa cells cultured on optically transparent electrode surface.

Low d.c. potential application induced changes of cellular morphology and growth of living cells on a potential-controlled electrode. At a potential range higher than +0.7 V (vs. Ag/AgCl), serious electric effects on cell viability, membrane permeability, and cytoskeletal morphology of HeLa cells were observed. On the other hand, at lower than +0.5 V no effect was observed. At the boundary potential range between +0.5 V to +0.7 V, where HeLa cells were cultured on the potential-controlled optically transparent In2O3 electrode (OTE) surface, intriguing effects on HeLa cells appeared. At this potential range, where HeLa cells cultured on a potential-applied OTE, all the cells were alive accompanying morphological change. The morphology of HeLa cells returned to their normal spindle shape, when potential application to the electrode was cut off. At a potential of +0.65 V, cell proliferation ratio of cultured cell on an electrode was about one-fifth of that on a non-controlled electrode. These results suggest that low d.c. electrical effects induce significant change in cellular morphology and function.     

Electrochemical prevention of marine biofouling on a novel titanium-nitride-coated plate formed by radio-frequency arc spraying

We have developed a new method for forming titanium-nitride(TiN)-coated plates using radio-frequency arc spraying (RFAS). A TiN coating formed by RFAS has been used for electrochemical prevention of marine biofouling. X-ray diffraction and X-ray photoelectron spectroscopy indicate that a TiN composite film containing Ti was formed on a polyethylene terephthalate plate surface when Ti was sprayed by RFAS under atmospheric pressure. A cyclic voltammogram (scan rate 20 mV/s) of the TiN formed by RFAS revealed no oxidative and reductive peak currents in the range −0.6 V to 1.2 V against a saturated silver/silver chloride (Ag/AgCl) electrode. When a potential of 1.0 V against Ag/AgCl was applied to the electrode in seawater, no dissolved Ti was detected. Changes in pH and the chlorine concentration were not observed in this range. In all, only 4.5% of the Vibrio alginolyticus cells attached to the electrode survived when a potential of 0.8 V against Ag/AgCl was applied in seawater for 30 min. In field experiments, attachment of the organisms to the TiN electrode was inhibited by applying an alternating potential of 1.0 V and −0.6 V against Ag/AgCl. The TiN film can be formed by RFAS on large and intricately shaped surfaces, and it is a practical electrode for the electrochemical prevention of fouling of various marine structures. Received: 17 April 1998 / Received revision: 5 June 1998 / Accepted: 19 June 1998     

Adaptation to high current using low external resistances eliminates power overshoot in microbial fuel cells

One form of power overshoot commonly observed with mixed culture microbial fuel cells (MFCs) is doubling back of the power density curve at higher current densities, but the reasons for this type of overshoot have not been well explored. To investigate this, MFCs were acclimated to different external resistances, producing a range of anode potentials and current densities. Power overshoot was observed for reactors acclimated to higher (500 and 5000 Ω) but not lower (5 and 50 Ω) resistances. Acclimation of the high external resistance reactors for a few cycles to low external resistance (5 Ω), and therefore higher current densities, eliminated power overshoot. MFCs initially acclimated to low external resistances exhibited both higher current in cyclic voltammograms (CVs) and higher levels of redox activity over a broader range of anode potentials (-0.4 to 0 V; vs. a Ag/AgCl electrode) based on first derivative cyclic voltammetry (DCV) plots. Reactors acclimated to higher external resistances produced lower current in CVs, exhibited lower redox activity over a narrower anode potential range (-0.4 to -0.2 V vs. Ag/AgCl), and failed to produce higher currents above ～-0.3 V (vs. Ag/AgCl). After the higher resistance reactors were acclimated to the lowest resistance they also exhibited similar CV and DCV profiles. Our findings show that to avoid overshoot, prior to the polarization and power density tests the anode biofilm must adapt to low external resistances to be capable of higher currents.     

Electrochemical analysis of autodisplayed adrenodoxin (Adx) on the outer membrane of E. coli

In this work, adrenodoxin (Adx) was expressed on the outer membrane of E. coli by autodisplay and then the iron–sulfur cluster was incorporated into apo-Adx by an anaerobic reconstitution process. For the determination of the redox potentials of the iron–sulfur clusters of the autodisplayed Adx, E. coli cells with autodisplayed Adx were immobilized on a gold electrode modified with a self-assembled monolayer of mercaptoundecanoic acid (MUA). From the repeated cyclic voltammetry (CV) analysis, the E. coli (10 mM HEPES buffer, pH 7.0) with autodisplayed Adx showed significant changes in shape with an oxidation peak at + 0.4 V (vs. Ag/AgCl) and a reduction peak at − 0.3 V (vs. Ag/AgCl) after the reconstitution process for the incorporation of the iron–sulfur cluster. From the repeated CV analysis in the reduction and oxidation potential ranges, the iron–sulfur clusters of the autodisplayed Adx were observed to undergo reversible redox reactions via direct electron transfer to the MUA-modified gold electrode.     

Direct reduction of NAD+ by electrochemical procedure and application of the regenerated NADH to enzyme reaction

Summary Enzymatically active NADH was formed from NAD⁺ directly in the electrochemical system by adopting an anion-charged membrane as a diaphragm and applying the less cathodic potential of –0.7V vs. Ag/AgCl electrode. The direct electrochemical procedure worked favorably as an NADH regenerator in the biochemical reaction system using D-lactate dehydrogenase which transforms pyruvate to D-lactate.     

Efficient electrocatalysis of L-cysteine oxidation at carbon ionic liquid electrode

The electrochemistry of L-cysteine (CySH) in neutral aqueous media was investigated using carbon ionic liquid electrode (CILE). Comparative experiments were carried out using glassy carbon electrodes. At CILE, highly reproducible and well-defined cyclic voltammograms were obtained for l-cysteine with a peak potential of 0.49V vs Ag/AgCl, showing that CILE manifests a good electrocatalytic activity toward oxidation of l-cysteine. A linear dynamic range of 2-210microM with an experimental detection limit of 2microM was obtained. The method was successfully applied to the determination of l-cysteine in a sample of soya milk. Cysteine oxidation at CILE does not result in deactivation of the electrode surface. Mechanistic studies showed that, at CILE, the overall CySH oxidation is controlled by the oxidation of the CyS(-) electroactive species.     

Electrically regulated cellular morphological and cytoskeletal changes on an optically transparent electrode

Electrically regulated morphological and cytoskeletal changes of HeLa cells were studied on an optically transparent electrode (OTE), on which potential-applied surface cellular behavior and morphogenesis were easily observed. Upon application of a potential, HeLa cells in an OTE exhibited remarkable morphological changes above +0.5 V (vs. Ag/AgCl) and below 0 V. At each potential in this potential range, change in F-actin distribution was observed using a fluorescent probe (rhodamine phalloidin). These results suggest that an electrical field induces a subcellular cytoskeletal change. Electrostimulation of cells with OTE can be a valuable strategy for the manipulation of cultured human cells.     

Glucose-sensing carbon paste electrode containing polyethylene glycol-modified glucose oxidase

Polyethylene glycol-modified glucose oxidase (PEG-GOD) was prepared. Carbon paste (CP) containing PEG-GOD retained enzyme activity of 0·02 U cm⁻². Anodic and cathodic peak currents of modified GOD in CP matrix were observed on the differential pulse voltammograms at the potential of −0·36 and −0·36 V vs. Ag/AgCl, respectively. The addition of glucose to a test solution brought about an increase in the anodic current on the PEG-GOD-based electrode at the potential as low as 0·0 V vs. Ag/AgCl. The current increase was proportional to the concentration of glucose up to 50 mM.     

A lysine dehydrogenase-based electrode for biosensing of L-lysine.

An amperometric biosensor for L-lysine based on the recently isolated enzyme lysine dehydrogenase is described. Immobilization of the enzyme onto a platinum electrode is achieved via entrapment within a gelatin support on a cellulose membrane. Anodic detection (at 0.4 V vs. Ag/AgCl) is facilitated by the presence of a redox-mediating ferricyanide ion. The effect of experimental variables such as pH, enzyme loading, applied potential, cofactor and mediator concentrations were evaluated in order to optimize the analytical performance. A detection limit of 7 x 10(-8) M, and linearity up to 7 x 10(-4) M are reported. The fast response permits adaptation for flow injection operation with good precision (RSD = 1.9%) and high sample throughout (40 samples per hour). The high specificity offered by this new enzyme is indicated by the lack of interference by other L-amino acids, alcohols or carbohydrates.     

Electrically promoted protein production by mammalian cells cultured on the electrode surface

Protein production of mammalian cells has been promoted by applying a small constant potential to the surface of an electrode on which cells are cultured. Human carcinoma line of MKN45 cells were cultured on the surface of a platinum-coated plastic plate electrode. Low d.c. voltage of constant potential was applied to the electrode during 4-day culture to modulate the production of carcinoembryonic antigen (CEA). The amounts of both secreted and membrane-bound CEA were dependent on the applied potential during culture. Secreted CEA was more than twice in amount in the potential range from 0.2 V to 0.6 V vs. Ag/Agcl as compared with that of normal culture. In the potential range, CEA was also increased in membrane-bound form. The potential-controlled cell culture may have an enhanced effect on protein production.     

Nano-composition of riboflavin-nafion functional film and its application in biosensing

A novel nafion-riboflavin membrane was constructed and characterized by the scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy and cyclic voltammetric techniques. The estimated average diameter of the designed nanoparticles was about 60 nm. The functional membrane showed a quasi-reversible electrochemical behaviour with a formal potential of -562 +/- 5 mV (vs Ag/AgCl) on the gold electrode. Some electrochemical parameters were estimated, indicating that the system has good and stable electron transfer properties. Moreover, horseradish peroxidase (HRP) was immobilized on the riboflavin-nafion functional membrane. The electrochemical behaviour of HRP was quasi-reversible with a formal potential of 80 +/- 5 mV (vs Ag/AgCl). The HRP in the film exhibited good catalytic activity towards the reduction of H2O2. It shows a linear dependence of its cathodic peak current on the concentration of H2O2, ranging from 10 to 300 (micro)M.     

Electrochemistry of Escherichia coli JM109: direct electron transfer and antibiotic resistance

In this study, the cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques were used to investigate the extracellular electron transfer from Escherichia coli JM109. It was demonstrated that the formal redox potential of direct electron transfer between electrode and an E. coli JM109 cell in aerobic buffer corresponds to -0.42 V vs. Ag/AgCl. Based on the electroactivity of bacterial cells, the electrochemical system for definition of sensitivity of microbiological material to antibiotics cefepime, ampicillin, amikacin, and erythromycin was proposed. The results obtained indicate that with electrochemical methods it is possible to provide screening of potential drugs for bacterial diseases. The electrochemical method allows estimating the degree of E. coli JM109 cells resistance to antibiotics within 2-5h using disposable screen-printed graphite electrodes.     

Determination of the formal reduction potential of Lumbricus terrestris hemoglobin using thin layer spectroelectrochemistry

The formal reduction potential (Eo') of Lumbricus terrestris hemoglobin was determined using thin layer spectroelectrochemistry as 0.073 (+/-0.005) V vs Ag/AgCl (0.281 V vs SHE, standard hydrogen electrode). Nernst plots of Lumbricus terrestris hemoglobin with tris-bipyridinecobalt(II) as a mediator titrant have similar linear slopes as Nernst plots of horse heart myoglobin with hexaamineruthenium(II) as a mediator titrant.     

Electrochemical activity of an Fe(III)-reducing bacterium, Shewanella putrefaciens IR-1, in the presence of alternative electron acceptors

Cyclic voltammetry demonstrated that cells of Shewanella putrefaciens grown under anaerobic conditions without nitrate were electrochemically active. The electrochemical activity was inactivated reversibly by exposure to air, but not by nitrate. Lactate and an applied potential at +200 mV against an Ag/AgCl reference electrode restored the electrochemical activity. These findings can be used to improve the performance of a mediator-less microbial fuel cell using electrochemically active bacteria in the presence of nitrate.     

Electrochemical modulation of antigen-antibody binding

The label-free amperometric detection of a rabbit IgG antigen by an anti-rabbit IgG antibody is achieved by observing the electrochemistry at a glassy carbon electrode modified with antibody entrapped in an electrodeposited polypyrrole membrane. In a flow injection apparatus the electrode is pulsed between -0.2 and +0.4 V versus Ag/AgCl. The pulsing of the electrode switches the polypyrrole membrane between the oxidised and reduced states. When antigen is injected into the flow stream a change in current is observed at the electrode despite the antigen or antibody being redox inactive at the potentials employed. It is proposed that this current is due to a change in the flux of ions into and out of the polypyrrole matrix during a pulse when the poly-anionic antigen is present. The immunoreaction was reversible because the 200 ms pulse at each potential was too short to allow secondary bonding forces (hydrogen bonding and hydrophobic forces) which are responsible for the strength of the antibody-antigen complex to be established. The consequence of the reversibility of the antigen-antibody binding is a low apparent affinity constant but an easily regenerated recognition interface.     

Extension of logarithmic growth of Thiobacillus ferrooxidans by potential controlled electrochemical reduction of Fe(III).

In this study, we demonstrated that the period of logarithmic growth for Thiobacillus ferrooxidans could be extended when optimal conditions for cell growth were maintained using potential controlled electrochemical cultivation with sufficient aeration. The optimal pH and Fe(II) concentration for the electrolytic cultivation were determined to be 2.0 and 150 mM, respectively. When the potential was set to 0.0V vs Ag/AgCl, the Pt electrode reduced Fe(III) to Fe(II) with an efficiency of 95%. A porous glass microbubble generator was used to maintain adequate levels of dissolved oxygen, which was the electron acceptor for T. ferrooxidans when the cell density in the medium was high. Under these conditions, cells at an initial density of 10(7) cells/mL grew logarithmically for 4days until the cell density was 4 x 10(9) cells/mL. This corresponded to a period of logarithmic growth that was 3 times longer than was observed in batch cultures without electrolysis. In addition, the final cell density reached 10(10) cells/mL after 6 days of electrochemical cultivation, which was a 50-fold increase over conventional batch culture. Under conditions of increasing cell density, potentiostatic electrolysis made it possible to remove Fe(III), which causes product inhibition, at an increasing rate and to correspondingly increase the production rate of Fe(II), which is the electron donor for T. ferrooxidans. Thus, our cultivation system provides a sufficient supply of electron donor and acceptor for T. ferrooxidans, thereby elongating the period of logarithmic growth and producing very high cell densities.     

An amperometric oxalate biosensor based on sorghum oxalate oxidase bound carboxylated multiwalled carbon nanotubes-polyaniline composite film

A highly sensitive, specific and rapid electrochemical oxalate biosensor was constructed by covalently immobilizing sorghum leaf oxalate oxidase on carboxylated multiwalled carbon nanotubes and conducting polymer, polyaniline nanocomposite film electrodeposited over the surface of platinum (Pt) wire using N-ethyl-N′-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS) chemistry. The modified electrode was characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectrophotometry. The optimized oxalate biosensor showed linear response range of 8.4-272 μM with correlation coefficient of 0.93 and rapid response within 5 s at a potential of 0.4 V vs Ag/AgCl. The sensitivity was approximately 0.0113 μA/μM with a detection limit of 3.0 μM. Proposed oxalate biosensor was successfully applied to human urine sample.     

Carbon fibre-based microbiosensors for in vivo measurements of acetylcholine and choline

This report describes technical improvements to the manufacture of a carbon fibre electrode for the stable and sensitive detection of H2O2 (detection limit at 0.5 microM). This electrode was also modified through the co-immobilisation of acetylcholinesterase (AChE) and/or choline oxidase (ChOx) in a bovine serum albumin (BSA) membrane for the development of a sensor for in vivo measurements of acetylcholine and choline. Amperometric measurements were performed using a conventional three-electrode system forming part of a flow-injection set-up at an applied potential of 800-1100 mV relative to an Ag/AgCl reference electrode. The optimised biosensor obtained was reproducible and stable, and exhibited a detection limit of 1 microM for both acetylcholine and choline. However, due to the high operating potential used, the biosensor was prone to substantial interference from other electroactive compounds, such as ascorbic acid. Therefore, in a further step, a mediated electron transfer approach was used that incorporated horseradish peroxidase into an osmium-based redox hydrogel layered onto the active surface of the electrode. Afterwards, a Nafion layer and a coating containing AChE and/or ChOx co-immobilised in a BSA membrane were successively deposited. This procedure further increased the selectivity of the biosensor, when operated in the same flow-injection system but at an applied potential of -50 mV relative to an Ag/AgCl reference electrode. The sensor exhibited good selectivity and a high sensitivity over a concentration range (0.3-100 microM) suitable for the measurement of choline and acetylcholine in vivo.     

Effect of electrical stimulation on HIV-1-infected HeLa cells cultured on an electrode surface

Acquired immunodeficiency syndrome (AIDS) is a disease caused by infection with the human immunodeficiency virus (HIV). Although drug therapy for AIDS is available, problems such as side effects associated with drug therapy and the appearance of resistant HIV strains have arisen. Therefore, therapies based on new principles other than drug treatment are required. In the present study, the effect of electrical stimulation on HIV-1(LAI) chronically infected HeLa (P6 HeLa/HIV-1(LAI)) cells cultured on an electrode surface was examined. The results indicated that sensitivity to electrical stimulation was much higher in P6 HeLa/HIV-1(LAI) cells than in uninfected P6 HeLa cells. When electrical stimulation was applied at 1.0 V (vs. Ag/AgCl) for 20 min, the proportion of damage to cell membrane among P6 HeLa/HIV-1(LAI) cells, as evaluated by Trypan blue staining, was approximately 4 times higher than that for uninfected P6 HeLa cells. Furthermore, in comparison with uninfected P6 HeLa cells, the proliferation of P6 HeLa/HIV-1(LAI) cells was significantly suppressed after electrical stimulation. This technique was proven to selectively kill P6 HeLa/HIV-1(LAI) cells, when compared with uninfected control cells.     

A novel system combining biocatalytic dephosphorylation of L-ascorbic acid 2-phosphate and electrochemical oxidation of resulting ascorbic acid

An enzyme electrode was prepared with acid phosphatase (ACP) for development of a new electric power generation system using ascorbic acid 2-phosphate (AA2P) as a fuel. The properties of the electrode were investigated with respect to biocatalytic dephosphorylation of AA2P and electrochemical oxidation of resulting ascorbic acid (AA). The enzyme electrode was fabricated by immobilization of ACP through amide linkage onto a self-assembled monolayer of 3-mercaptopropionic acid on a gold electrode. AA2P was not oxidized on a bare gold electrode in the potential sweep range from -0.1 to +0.5 V vs. Ag/AgCl. However, the enzyme electrode gave an oxidation current in citric buffer solution of pH 5 containing 10 mM of AA2P. The oxidation current began to increase at +0.2V, and reached to 5.0 μA cm(-2) at +0.5 V. The potential +0.2 V corresponded to the onset of oxidation of ascorbic acid (AA). These results suggest that the oxidation current observed with the enzyme electrode is due to AA resulting from dephosphorylation of AA2P. The oxidation current increased with increasing concentration of AA2P and almost leveled off at around the concentration of 5mM. Thus the enzyme electrode brought about biocatalytic conversion of AA2P to AA, followed by electrochemical oxidation of the AA. The oxidation current is likely to be controlled by the biocatalytic reaction.