Susceptibility of <Emphasis Type="Italic">Candida</Emphasis> biofilms to histatin 5 and fluconazole

Candida-associated denture stomatitis has a high rate of recurrence. Candida biofilms formed on denture acrylic are more resistant to antifungals than planktonic yeasts. Histatins, a family of basic peptides secreted by the major salivary glands in humans, especially histatin 5, possess significant antifungal properties. We examined antifungal activities of histatin 5 against planktonic or biofilm Candida albicans and Candida glabrata. Candida biofilms were developed on poly(methyl methacrylate) discs and treated with histatin 5 (0.01–100 μM) or fluconazole (1–200 μM). The metabolic activity of the biofilms was measured by the XTT reduction assay. The fungicidal activity of histatin 5 against planktonic Candida was tested by microdilution plate assay. Biofilm and planktonic C. albicans GDH18, UTR-14 and 6122/06 were highly susceptible to histatin 5, with 50% RMA (concentration of the agent causing 50% reduction in the metabolic activity; biofilm) of 4.6 ± 2.2, 6.9 ± 3.7 and 1.7 ± 1.5 μM, and IC₅₀ (planktonic cells) of 3.0 ± 0.5, 2.6 ± 0.1 and 4.8 ± 0.5, respectively. Biofilms of C. glabrata GDH1407 and 6115/06 were less susceptible to histatin 5, with 50% RMA of 31.2 ± 4.8 and 62.5 ± 0.7 μM, respectively. Planktonic C. glabrata was insensitive to histatin 5 (IC₅₀ > 100 μM). Biofilm-associated Candida was highly resistant to fluconazole in the range 1–200 μM; e.g. at 100 μM only ~20% inhibition was observed for C. albicans, and ~30% inhibition for C. glabrata. These results indicate that histatin 5 exhibits antifungal activity against biofilms of C. albicans and C. glabrata developed on denture acrylic. C. glabrata is significantly less sensitive to histatin 5 than C. albicans.     

Genetic engineering biofilms in situ using ultrasound-mediated DNA delivery

The ability to directly modify native and established biofilms has enormous potential in understanding microbial ecology and application of biofilm in 'real-world' systems. However, efficient genetic transformation of established biofilms at any scale remains challenging. In this study, we applied an ultrasound-mediated DNA delivery (UDD) technique to introduce plasmid to established non-competent biofilms in situ. Two different plasmids containing genes coding for superfolder green fluorescent protein (sfGFP) and the flavin synthesis pathway were introduced into established bacterial biofilms in microfluidic flow (transformation efficiency of 3.9 ± 0.3 × 10^-7 cells in biofilm) and microbial fuel cells (MFCs), respectively, both employing UDD. Gene expression and functional effects of genetically modified bacterial biofilms were observed, where some cells in UDD-treated Pseudomonas putida UWC1 biofilms expressed sfGFP in flow cells and UDD-treated Shewanella oneidensis MR-1 biofilms generated significantly (P < 0.05) greater (61%) bioelectricity production (21.9 ± 1.2 µA cm⁻²) in MFC than a wild-type control group (~ 13.6 ± 1.6 µA cm⁻²). The effects of UDD were amplified in subsequent growth under selection pressure due to antibiotic resistance and metabolism enhancement. UDD-induced gene transfer on biofilms grown in both microbial flow cells and MFC systems was successfully demonstrated, with working volumes of 0.16 cm³ and 300 cm³, respectively, demonstrating a significant scale-up in operating volume. This is the first study to report on a potentially scalable direct genetic engineering method for established non-competent biofilms, which can be exploited in enhancing their capability towards environmental, industrial and medical applications.     

Effects of Contact Time, Pressure, Percent Relative Humidity (%RH), and Material Type on Listeria Biofilm Adhesive Strength at a Cellular Level Using Atomic Force Microscopy (AFM)

Whereas the transfer of Listeria from surfaces to foods and vice versa has been well documented, little is known about the mechanism of bacterial transfer. The objective of this work is to gain a better understanding of the forces involved in listerial biofilms adhesion using atomic force microscopy (AFM). L. monocytogenes Scott A was grown as biofilms on stainless steel surfaces by inoculating stainless steel coupons with Listeria and incubating the coupons for 48 h at 32 °C with a diluted 1:20 tryptic soy broth. After growth, biofilms were equilibrated over saturated salt solutions at a constant relative humidity (%RH) before measurement of adhesion forces using AFM. The effects of contact time, loading force, and biofilm relative humidity (%RH) suggested that neither contact time, loading force nor biofilm %RH had a significant effect on biofilm adhesiveness at a cellular level (P > 0.05). In a second set of experiments, the influence of material type on biofilm adhesiveness was evaluated using two different colloidal probes (SiO₂ and polyethylene). Results showed that the maximum pull-off force and retraction work needed to retract the cantilever for glass (−85.42 nN and 1.610⁻¹⁵ J, respectively) were significantly lower than those of polyethylene (−113.38 nN and 2.7 × 10^–15 J, respectively; P < 0.001). The results of this study suggest that Listeria biofilms adhere more strongly to hydrophobic surfaces than hydrophilic surfaces when measured at a cellular level. These results provide important insights that could lead to new ways to remediate and avoid listerial biofilm formation in the food industry.     

Antibiofilm and antifungal activities of medium-chain fatty acids against Candida albicans via mimicking of the quorum-sensing molecule farnesol

Candida biofilms are tolerant to conventional antifungal therapeutics and the host immune system. The transition of yeast cells to hyphae is considered a key step in C. albicans biofilm development, and this transition is inhibited by the quorum-sensing molecule farnesol. We hypothesized that fatty acids mimicking farnesol might influence hyphal and biofilm formation by C. albicans. Among 31 saturated and unsaturated fatty acids, six medium-chain saturated fatty acids, that is, heptanoic acid, octanoic acid, nonanoic acid, decanoic acid, undecanoic acid and lauric acid, effectively inhibited C. albicans biofilm formation by more than 75% at 2 µg ml⁻¹ with MICs in the range 100–200 µg ml⁻¹. These six fatty acids at 2 µg ml⁻¹ and farnesol at 100 µg ml⁻¹ inhibited hyphal growth and cell aggregation. The addition of fatty acids to C. albicans cultures decreased the productions of farnesol and sterols. Furthermore, down-regulation of several hyphal and biofilm-related genes caused by heptanoic or nonanoic acid closely resembled the changes caused by farnesol. In addition, nonanoic acid, the most effective compound diminished C. albicans virulence in a Caenorhabditis elegans model. Our results suggest that medium-chain fatty acids inhibit more effectively hyphal growth and biofilm formation than farnesol.     

The impact of electron donors and anode potentials on the anode-respiring bacteria community

Both anode potentials and substrates can affect the process of biofilm formation in bioelectrochemical systems, but it is unclear who primarily determine the anode-respiring bacteria (ARB) community structure and composition. To address this issue, we divided microbial electrolysis cells (MECs) into groups, feeding them with different substrates and culturing them at various potentials. Non-turnover cyclic voltammetry indicated that the extracellular electron transfer components were uniform when feeding acetate, because the same oxidation peaks occurred at − 0.36 ± 0.01 and − 0.17 ± 0.01 V (vs. Ag/AgCl). Illumina MiSeq sequencing revealed that the dominating ARB was Geobacter, which did not change with different potentials. When the MECs were cultured with sucrose and mixed substrates, oxidation peak P3 (− 0.29 ± 0.015 V) occurred at potentials of − 0.29 and 0.01 V. This may be because of the appearance of Unclassified_AKYG597. In addition, oxidation peak P4 (− 0.99 ± 0.01 V) occurred at high and low potentials (0.61 and − 0.45 V, respectively), and the maximum current densities were far below those of the middle potentials. Illumina MiSeq sequencing showed that fermentation microorganisms (Lactococcus and Sphaerochaeta) dominated the biofilms. Consequently, substrate primarily determined the dominating ARB, and Geobacter invariably dominated the acetate-fed biofilms with potentials changed. Conversely, different potentials mainly affected fermentable substrate-fed biofilms, with dominating ARB turning into Unclassified_AKYG59.

     

Virulence and pathogenicity of Candida albicans is enhanced in biofilms containing oral bacteria

This study examined the influence of bacteria on the virulence and pathogenicity of candidal biofilms. Mature biofilms (Candida albicans-only, bacteria-only, C. albicans with bacteria) were generated on acrylic and either analysed directly, or used to infect a reconstituted human oral epithelium (RHOE). Analyses included Candida hyphae enumeration and assessment of Candida virulence gene expression. Lactate dehydrogenase (LDH) activity and Candida tissue invasion following biofilm infection of the RHOE were also measured. Candida hyphae were more prevalent (p < 0.05) in acrylic biofilms also containing bacteria, with genes encoding secreted aspartyl-proteinases (SAP4/SAP6) and hyphal-wall protein (HWP1) up-regulated (p < 0.05). Candida adhesin genes (ALS3/EPA1), SAP6 and HWP1 were up-regulated in mixed-species biofilm infections of RHOE. Multi-species infections exhibited higher hyphal proportions (p < 0.05), up-regulation of IL-18, higher LDH activity and tissue invasion. As the presence of bacteria in acrylic biofilms promoted Candida virulence, consideration should be given to the bacterial component when managing denture biofilm associated candidoses.     

Sessile Legionella pneumophila is able to grow on surfaces and generate structured monospecies biofilms

Currently, models for studying Legionella pneumophila biofilm formation rely on multi-species biofilms with low reproducibility or on growth in rich medium, where planktonic growth is unavoidable. The present study describes a new medium adapted to the growth of L. pneumophila monospecies biofilms in vitro. A microplate model was used to test several media. After incubation for 6 days in a specific biofilm broth not supporting planktonic growth, biofilms consisted of 5.36 ± 0.40 log (cfu cm^?2) or 5.34 ± 0.33 log (gu cm^?2). The adhered population remained stable for up to 3 weeks after initial inoculation. In situ confocal microscope observations revealed a typical biofilm structure, comprising cell clusters ranging up to ～300 μm in height. This model is adapted to growing monospecies L. pneumophila biofilms that are structurally different from biofilms formed in a rich medium. High reproducibility and the absence of other microbial species make this model useful for studying genes involved in biofilm formation.     

Combined treatment of Pseudomonas aeruginosa biofilms with bacteriophages and chlorine

Bacterial biofilms are a growing concern in a broad range of areas. In this study, a mixture of RNA bacteriophages isolated from municipal wastewater was used to control and remove biofilms. At the concentrations of 400 and 4 × 10⁷ PFU/mL, the phages inhibited Pseudomonas aeruginosa biofilm formation by 45 ± 15% and 73 ± 8%, respectively. At the concentrations of 6,000 and 6 × 10⁷ PFU/mL, the phages removed 45 ± 9% and 75 ± 5% of pre‐existing P. aeruginosa biofilms, respectively. Chlorine reduced biofilm growth by 86 ± 3% at the concentration of 210 mg/L, but it did not remove pre‐existing biofilms. However, a combination of phages (3 × 10⁷ PFU/mL) and chlorine at this concentration reduced biofilm growth by 94 ± 2% and removed 88 ± 6% of existing biofilms. In a continuous flow system with continued biofilm growth, a combination of phages (a one‐time treatment at the concentration of 1.9 × 10⁸ PFU/mL for 1 h first) with chlorine removed 97 ± 1% of biofilms after Day 5 while phage and chlorine treatment alone removed 89 ± 1% and 40 ± 5%, respectively. For existing biofilms, a combined use of a lower phage concentration (3.8 × 10⁵ PFU/mL) and chlorination with a shorter time duration (12 h) followed by continuous water flushing removed 96 ± 1% of biofilms in less than 2 days. Laser scanning confocal microscopy supplemented with electron microscopy indicated that the combination treatment resulted in biofilms with lowest cell density and viability. These results suggest that the combination treatment of phages and chlorine is a promising method to control and remove bacterial biofilms from various surfaces. Biotechnol. Bioeng. 2013; 110: 286–295. © 2012 Wiley Periodicals, Inc.     

Structural organization and dynamics of exopolysaccharide matrix and microcolonies formation by Streptococcus mutans in biofilms

Aims: To investigate the structural organization and dynamics of exopolysaccharides (EPS) matrix and microcolonies formation by Streptococcus mutans during the biofilm development process. Methods and Results: Biofilms of Strep. mutans were formed on saliva‐coated hydroxyapatite (sHA) discs in the presence of glucose or sucrose (alone or mixed with starch). At specific time points, biofilms were subjected to confocal fluorescence imaging and computational analysis. EPS matrix was steadily formed on sHA surface in the presence of sucrose during the first 8 h followed by a threefold biomass increase between 8 and 30 h of biofilm development. The initial formation and further development of three‐dimensional microcolony structure occurred concomitantly with EPS matrix synthesis. Tridimensional renderings showed EPS closely associated with microcolonies throughout the biofilm development process forming four distinct domains (i) between sHA surface and microcolonies, (ii) within, (iii) covering and (iv) filling the spaces between microcolonies. The combination of starch and sucrose resulted in rapid formation of elevated amounts of EPS matrix and faster assembly of microcolonies by Strep. mutans, which altered their structural organization and susceptibility of the biofilm to acid killing (vs sucrose‐grown biofilms; P < 0·05). Conclusions: Our data indicate that EPS modulate the development, sequence of assembly and spatial distribution of microcolonies by Strep. mutans. Significance and Impact of the Study: Simultaneous visualization and analysis of EPS matrix and microcolonies provide a more precise examination of the structural organization of biofilms than labelling bacteria alone, which could be a useful approach to elucidate the exact mechanisms by which Strep. mutans influences oral biofilm formation and possibly identify novel targets for effective antibiofilm therapies.     

Biofilm Formation by Cryptococcus neoformans Under Distinct Environmental Conditions

Cryptococcus neoformans is an opportunistic fungal pathogen with a propensity to infect the central nervous system of immune compromised individuals causing life-threatening meningoencephalitis. Cryptococcal biofilms have been described as a protective niche against microbial predators in nature and shown to enhance resistance against antifungal agents and specific mediators of host immune responses. Based on the potential importance of cryptococcal biofilms to its survival in the human host and in nature, these studies were designed to investigate those factors that mediate biofilm formation by C. neoformans. We observed that C. neoformans preferentially grew as planktonic cells when cultured under specific conditions designed to mimic growth within host tissues (37°C, neutral pH, and ~5% CO₂) or phagocytes (37°C, acidic pH, and ~5% CO₂) and as biofilms when cultured under conditions such as those encountered in the external environment (25–37°C, neutral pH, and ambient CO₂). Altogether, our studies suggest that conditions similar to those observed in its natural habitat may be conducive to biofilm formation by C. neoformans.     

Species and material considerations in the formation and development of microalgal biofilms

The development of microalgal biofilms has received very limited study despite its relevance in the design of photobioreactors where film growth may be advantageous for biomass separation or disadvantageous in fouling surfaces. Here, the effects of species selection, species control, and substrate properties on biofilms of Scenedesmus obliquus and Chlorella vulgaris were investigated. Experiments were conducted in batch culture and in continuous culture modes in a flow cell. Cell growth was monitored using confocal laser scanning microscopy and gravimetrically. Species selection and species control had significant effects on biofilm development. On non-sterile wastewater, C. vulgaris shifted from primarily planktonic (23.7% attachment) to primarily sessile (79.8% attachment) growth. The biofilms that developed in non-sterile conditions were thicker (52 ± 19 μm) than those grown in sterile conditions (7 ± 6 μm). By contrast, S. obliquus attained similar thicknesses (54 ± 31 and 53 ± 38 μm) in both sterile and non-sterile conditions. Neither species was able to dominate a non-sterile biofilm. The effect of substrate surface properties was minimal. Both species grew films of similar thickness (∼30 μm for S. obliquus, <10 μm for C. vulgaris) on materials ranging from hydrophilic (glass) to hydrophobic (polytetrafluoroethylene). Surface roughness created by micropatterning the surface with 10 μm grooves did not translate into long-term increases in biofilm thickness. The results indicate that species selection and control are more important than surface properties in the development of microalgal biofilms.     

Finite element–based injury metrics for pulmonary contusion via concurrent model optimization

This study explores the relationship between impact severity and resulting pulmonary contusion (PC) for four impact conditions using a rat model of the injury. The force–deflection response from a Finite Element (FE) model of the lung was simultaneously matched to experimental data from distinct impacts via a genetic algorithm optimization. Sprague-Dawley rats underwent right-side thoracotomy prior to impact. Insults were applied directly to the lung via an instrumented piston. Five cohorts were tested: a sham group and four groups experiencing lung insults of varying degrees of severity. The values for impact velocity (V) and penetration depth (D) of the cohorts were Group 1, (V = 6.0 m · s⁻¹, D = 5.0 mm), Group 2, (V = 1.5 m · s⁻¹,D = 5.0 mm), Group 3, (V = 6 m · s⁻¹, D = 2.0 mm), and Group 4, (V = 1.5 m · s⁻¹, D = 2.0 mm). CT scans were acquired at 24 h, 48 h, and 1 week post-insult. Contusion volume was determined through segmentation. FE-based injury metrics for PC were determined at 24 h and 1 week post-impact, based on the observed volume of contusion and first principal strain. At 24 h post-impact, the volume of high radiopacity lung (HRL) was greatest for the severe impact group (mean HRL = 9.21 ± 4.89) and was significantly greater than all other cohorts but Group 3. The concurrent optimization matched simulated and observed impact energy within one standard deviation for Group 1 (energy = 3.88 ± 0.883 mJ, observed vs. 4.47 mJ, simulated) and Group 2 (energy = 1.46 ± 0.403 mJ, observed vs. 1.50 mJ, simulated) impacts. Statistically significant relationships between HRL and impact energy are presented. The FEA-based injury metrics at 24 h post-contusion are e_max·[(e)\dot]_max{\varepsilon_{\max}\cdot \dot {\varepsilon}_{\max}} exceeding 94.5 s⁻¹, ε _max exceeding 0.284 and [(e)\dot]_max{\dot{\varepsilon}_{\max}} exceeding 470 s⁻¹. Thresholds for injury to the lung still present at 1 week post-impact were also determined. They are e_max·[(e)\dot]_max{\varepsilon_{\max}\cdot \dot {\varepsilon}_{\max}} exceeding 149 s⁻¹, ε _max exceeding 0.343 and [(e)\dot]_max{\dot{\varepsilon}_{\max}} exceeding 573 s⁻¹. A mesh sensitivity study found that thresholds based on strain rate were more sensitive to changes to mesh density than the threshold based on strain only.     

Characterization of Halanaerobaculum tunisiense gen. nov., sp. nov., a new halophilic fermentative, strictly anaerobic bacterium isolated from a hypersaline lake in Tunisia

A new halophilic anaerobe was isolated from the hypersaline surface sediments of El-Djerid Chott, Tunisia. The isolate, designated as strain 6SANG, grew at NaCl concentrations ranging from 14 to 30%, with an optimum at 20–22%. Strain 6SANG was a non-spore-forming, non-motile, rod-shaped bacterium, appearing singly, in pairs, or occasionally as long chains (0.7–1 × 4–13 μm) and showed a Gram-negative-like cell wall pattern. It grew optimally at pH values between 7.2 and 7.4, but had a very broad pH range for growth (5.9–8.4). Optimum temperature for growth was 42°C (range 30–50°C). Strain 6SANG required yeast extract for growth on sugars. Glucose, sucrose, galactose, mannose, maltose, cellobiose, pyruvate, and starch were fermented. The end products from glucose fermentation were acetate, butyrate, lactate, H₂, and CO₂. The G + C ratio of the DNA was 34.3 mol%. Strain 6SANG exhibited 16S rRNA gene sequence similarity values of 91–92% with members of the genus Halobacteroides, H. halobius being its closest phylogenetic relative. Based on phenotypic and phylogenetic characteristics, we propose that this bacterium be classified as a novel species of a novel genus, Halanaerobaculum tunisiense gen. nov., sp. nov. The type strain is 6SANG^T (=DSM 19997^T = JCM 15060^T).     

Quantification of water and biomass in small colony variant PAO1 biofilms by confocal Raman microspectroscopy

The Raman spectra, water content, and biomass density of wild-type (WT) Pseudomonas aeruginosa PAO1, small colony variant (SCV) PAO1, and Pseudoalteromonas sp. NCIMB 2021 biofilms were compared in order to determine their variation with strain and species. Living, fully submerged biofilms were analyzed in situ by confocal Raman microspectroscopy for up to 2 weeks. Water to biomass ratios (W/BRs), which are the ratios of the O–H stretching vibration of water at 3,450 cm⁻¹ to the C–H stretching band characteristic of biomass at 2,950 cm⁻¹, were used to estimate the biomass density and cell density by comparison with W/BRs of protein solutions and bacterial suspensions, respectively, on calibration curves. The hydration within SCV biofilm colonies was extremely heterogeneous whereas W/BRs were generally constant in young WT biofilm colonies. The mean biomass in biofilm colonies of WT or colony cores of SCV was typically equivalent to 16% to 27% protein (w/v), but was 10% or less for NCIMB 2021. The corresponding cell densities were 7.5 to >10 × 10¹⁰ cfu mL⁻¹ for SCV, while the maximum cell density for NCIMB biofilms was 2.8 × 10¹⁰ cfu mL⁻¹.     

Colorimetric assay for biofilms in wet processing conditions

Controlling bacterial biofilms is necessary for food safety and industrial processing in clean room environments. Our goal was to develop a method to quantitatively measure biofilm produced by pathogens under wet poultry production and processing conditions. Stainless steel and glass coupons were incubated in aqueous media containing reduced nutrients and exposed to Listeria monocytogenes under static temperature and humidity conditions. Samples were measured separately by biofilm assay and viable cell density, and then confirmed by spectrophotometry and microscopy. The biofilm assay resulted in different t groupings from the cell density. The mean from the biofilm assay was 0.50, and the error% was 0.595. The mean of the log₁₀ density (cfu/cm²) was 5.90, and the standard deviation ranged from 0.127 to 0.438 on 24 coupons. The typical sequence of biofilm development, followed by microscopy of biofilm grown on glass coupons, exhibited a change from dispersed single cells to an all-over pattern of clumps with few dispersed cells. L. monocytogenes formed biofilms on all of the substrata tested. Bacterial counts from planktonic cultures at 24, 48, 72, and 144 h confirmed that L. monocytogenes remained viable throughout the experiment and reached equilibrium between 6 and 24 h. The cell density log₁₀/ml was 8.01, 8.03, 7.69, and 6.66, respectively; and the standard deviation ranged from 0.156 to 0.394. The data will be used to grow stable biofilms of Listeria spp. collected from the food processing environment for further study. This is the first use of the crystal violet assay for measurement of bacterial biofilms on stainless steel under these conditions. The methods tested are applicable to other bacteria and substrata.     

Functional group characterization of lactic bacterial biosurfactants and evaluation of antagonistic actions against clinical isolates of methicillin-resistant Staphylococcus aureus

The present study investigated the antimicrobial and antibiofilm potential of biosurfactants derived from Lactobacillus fermentum Lf1, L. fermentum LbS4 and Lactobacillus plantarum A5 against clinical isolates of methicillin-resistant Staphylococcus aureus (MRSA). The cell wall-bound and intracellular biosurfactants were extracted by solvent extraction method. Fourier-transform infrared spectroscopy-based characterization of biosurfactants revealed the heterogeneous chemical composition involving proteins, fatty acids and carbohydrate moieties in LbS4 and A5, while only the sugar and lipid fractions in Lf1. Fatty acid profiling using Gas chromatography-mass spectrometry indicated hexadecanoic acid and stearic acid as the predominant fatty acids in the biosurfactants of all these strains. Biosurfactants demonstrated dose-dependent antibacterial action against MRSA isolates with the highest inhibition zone diameter (30·0 ± 0·0 to 35·0 ± 0·0 mm) recorded at 400 mg ml⁻¹. Biosurfactants showed an excellent staphylococcal antibiofilm activity by preventing the biofilm formation and disrupting the preformed biofilms. Visual inspection through scanning electron microscopy witnessed the biosurfactants-induced alteration in the cell membrane integrity and subsequent membrane pore formation on staphylococcal cells. Taken together, our findings emphasize the prospects of biomedical applications of biosurfactants as bactericidal and biofilm controlling agents to confront staphylococcal nosocomial infections.     

Production of poly-β-hydroxybutyrate (PHB) by <Emphasis Type="Italic">Alcaligenes latus</Emphasis> from maple sap

Maple sap, an abundant natural product especially in Canada, is rich in sucrose and thus may represent an ideal renewable feedstock for the production of a wide variety of value-added products. In the present study, maple sap or sucrose was employed as a carbon source to Alcaligenes latus for the production of poly-β-hydroxybutyrate (PHB). In shake flasks, the biomass obtained from both the sap and sucrose were 4.4 ± 0.5 and 2.9 ± 0.3 g/L, and the PHB contents were 77.6 ± 1.5 and 74.1 ± 2.0%, respectively. Subsequent batch fermentation (10 L sap) resulted in the formation of 4.2 ± 0.3 g/L biomass and a PHB content of 77.0 ± 2.6%. The number average molecular weights of the PHB produced by A. latus from maple sap and pure sucrose media were 300 ± 66 × 10³ and 313 ± 104 × 10³ g/mol, respectively. Near-infrared, ¹H magnetic resonance imaging (MRI), and ¹³C-MRI spectra of the microbially produced PHB completely matched those obtained with a reference material of poly[(R)-3-hydroxybutyric acid]. The polymer was found to be optically active with [α]²⁵ _D equaled to −7.87 in chloroform. The melting point (177.0°C) and enthalpy of fusion (77.2 J/g) of the polymer were also in line with those reported, i.e., 177°C and 81 J/g, respectively.     

Enhanced germicidal effects of pulsed UV‐LED irradiation on biofilms

Aims: The major objective of the study was to evaluate the enhanced germicidal effects of low‐frequency pulsed ultraviolet A (UVA)‐light‐emitting diode (LED) on biofilms. Methods and Results: The germicidal effects of UVA‐LED irradiation (365 nm, 0·28 mW cm^?2, in pulsed or continuous mode) on Candida albicans or Escherichia coli biofilms were evaluated by determining colony‐forming units. The morphological change of microbial cells in biofilms was observed using scanning electron microscopy. After 5‐min irradiation, over 90% of viable micro‐organisms in biofilms had been killed, and pulsed irradiation (1–1000 Hz) had significantly greater germicidal ability than continuous irradiation. Pulsed irradiation (100 Hz, 60 min) almost completely killed micro‐organisms in biofilm (>99·9%), and 20‐min irradiation greatly damaged both microbial species. Interestingly, few hyphae were found in irradiated Candida biofilms. Moreover, mannitol treatment, a scavenger of hydroxyl radicals (OH^?), significantly protected viable micro‐organisms in biofilms from UVA‐LED irradiation. Conclusions: The study demonstrated that pulsed UVA‐LED irradiation has a strong germicidal effect (maximum at 100 Hz, over 5‐min irradiation) and causes the disappearance of hyphal forms of Candida. Significance and Impact of the Study: This study can assist in developing a low‐frequency pulsed UVA‐LED system to be applied to pathogenic biofilms for disinfection.     

On-demand release of Candida albicans biofilms from urinary catheters by mechanical surface deformation

Abstract

Candida albicans is a leading cause of catheter-associated urinary tract infections and elimination of these biofilm-based infections without antifungal agents would constitute a significant medical advance. A novel urinary catheter prototype that utilizes on-demand surface deformation is effective at eliminating bacterial biofilms and here the broader applicability of this prototype to remove fungal biofilms has been demonstrated. C. albicans biofilms were debonded from prototypes by selectively inflating four additional intralumens surrounding the main lumen of the catheters to provide the necessary surface strain to remove the adhered biofilm. Deformable catheters eliminated significantly more biofilm than the controls (>90% eliminated vs 10% control; p < 0.001). Mechanical testing revealed that fungal biofilms have an elastic modulus of 45 ± 6.7 kPa with a fracture energy of 0.4–2 J m^?2. This study underscores the potential of mechanical disruption as a materials design strategy to combat fungal device-associated infections.     

Cryopreservation of <Emphasis Type="Italic">Dendrobium candidum</Emphasis> Wall. ex Lindl. protocorm-like bodies by encapsulation-vitrification

Protocorm-like bodies (PLBs) of Dendrobium candidum Wall. ex Lindl., orchid, were successfully cryopreserved using an encapsulation vitrification method. PLBs were precultured in liquid Murashige and Skoog (MS) medium containing 0.2 mg l⁻¹ α-naphthalene acetic acid and 0.5 mg l⁻¹ 6-benzyladenine enriched with 0.75 M sucrose, and grown under continuous light (36 μmol m⁻² s⁻¹) at 25 ± 1°C for 5 days. PLBs were osmoprotected with a mixture of 2 M glycerol and 1 M sucrose for 80 min at 25°C and dripped in a 0.5 M CaCl₂ solution containing 0.5 M sucrose at 25 ± 1°C and left for 15 min to form Ca-alginate beads (about 4 mm in diameter). Then, these were dehydrated with a plant vitrification solution 2 (PVS₂) consisting of 30% (w/v) glycerol, 15% (w/v) ethylene glycol, and 15% (w/v) dimethyl sulfoxide in 0.5 M sucrose, pH 5.8, for 150 min at 0°C. Encapsulated and dehydrated PLBs were plunged directly into liquid nitrogen for 1 h. Cryopreserved PLBs were then rapidly re-warmed in a water bath at 40°C for 3 min and then washed with MS medium containing 1.2 M sucrose for three times at 10 min intervals. Within 60 days, plantlets with the cryopreserved PLBs developed normal shoots and roots, and without any observed morphological abnormalities, were obtained. The survival rate of encapsulated-vitrified PLBs was above 85%. Thus, this encapsulation-vitrification method was deemed promising for cryopreservation of PLBs of D. candidum.