Biocatalyst engineering exerts a dramatic effect on selectivity of hydrolysis catalyzed by immobilized lipases in aqueous medium

It has been found that enantioselectivity of lipases is strongly modified when their immobilization is performed by involving different areas of the enzyme surface, by promoting a different degree of multipoint covalent immobilization or by creating different environments surrounding different enzyme areas. Moreover, selectivity of some immobilized enzyme molecules was much more modulated by the experimental conditions than other derivatives. Thus, some immobilized derivatives of Candida rugosa (CRL) and C. antarctica-B (CABL) lipases are hardly enantioselective in the hydrolysis of chiral esters of (R,S)-mandelic acid under standard conditions (pH 7.0 and 25°C) (E<2). However, other derivatives of the same enzymes exhibited a very good enantioselectivity under nonstandard conditions. For example, CRL adsorbed on PEI-coated supports showed a very high enantio-preference towards S-isomer (E=200) at pH 5. On the other hand, CABL adsorbed on octyl-agarose showed an interesting enantio-preference towards the R-isomer (E=25) at pH 5 and 4°C. These biotransformations are catalyzed by isolated lipase molecules acting on fully soluble substrates and in the absence of interfacial activation against external hydrophobic interfaces. Under these conditions, lipase catalysis may be associated to important conformational changes that can be strongly modulated via biocatalyst and biotransformation engineering. In this way, selective biotransformations catalyzed by immobilized lipases in macro-aqueous systems can be easily modulated by designing different immobilized derivatives and reaction conditions.     

Enzymatic transesterification in a solvent-free system: synthesis of sn-2 docosahexaenoyl monoacylglycerol

Abstract

The enzymatic transesterification of docosahexaenoic acid (DHA) ethyl ester with glycerol was carried out by using several immobilized lipases in a solvent-free system. This reaction involves the initial formation of sn-2 docosahexaenyl monoacylglycerol. This DHA derivative is highly relevant for improving the bioavailability of DHA and it has received increasing interest in the field of nutrition. Three commercial lipases, from Rhizomucor miehei (RML), Alcaligenes sp. (AQ) and Candida antarctica-fraction B (CALB) were immobilized by interfacial adsorption on a commercial hydrophobic support (a methacrylate resin containing octadecyl groups, Sepabeads C-18) and tested for glycerolysis of DHA ethyl ester. In certain cases (e.g. immobilized CALB), the transesterification reaction continues to the formation of triacylglycerol (80%) by using a very high excess of DHA ethyl ester ((115 mmols versus 1.24 mmols of glycerol and high temperatures (50?°C). However, the same biocatalyst working at lower temperatures, 37?°C, synthetizes a 90% of sn-2 monoacylglycerol even in the presence of that a high excess of DHA ethyl ester. Interestingly, immobilized RML derivative synthesizes a 98% of sn-2 monoacylglyceride (2-MG) in 15?min at 37?°C with a 4% of immobilized biocatalyst. These high activity and regioselectivity under very mild reaction conditions are very interesting for the thermal oxidative stability of the omega-3 fatty acid as well as for the thermal stability of the biocatalyst. Using Normal Phase HPLC-ELSD and accurate commercial markers, the formation of the 2-MG was confirmed.     

Hydrolysis of triacetin catalyzed by immobilized lipases: effect of the immobilization protocol and experimental conditions on diacetin yield

The effect of the immobilization protocol and some experimental conditions (pH value and presence of acetonitrile) on the regioselective hydrolysis of triacetin to diacetin catalyzed by lipases has been studied. Lipase B from Candida antarctica (CALB) and lipase from Rhizomucor miehei (RML) were immobilized on Sepabeads (commercial available macroporous acrylic supports) activated with glutaraldehyde (covalent immobilization) or octadecyl groups (adsorption via interfacial activation). All the biocatalysts accumulated diacetin. Covalently immobilized RML was more active towards rac-methyl mandelate than the adsorbed RML. However, this covalent RML preparation presented the lowest activity towards triacetin. For this reason, this preparation was discarded as biocatalyst for this reaction. At pH 7, acyl migration occurred giving a mixture of 1,2 and 1,3 diacetin, but at pH 5.5, only 1,2 diacetin was produced. Yields were improved at acidic pH values and in the presence of 20% acetonitrile (to over 95%). RML immobilized on octadecyl Sepabeads was proposed as optimal preparation, mainly due to its higher specific activity. Each enzyme preparation presented very different properties. Moreover, changes in the reaction conditions affected the various immobilized enzymes in a different way.     

Immobilization of lipases for non-aqueous synthesis

Immobilization of lipases involves many levels of complications relating to the structure of the active site and its interactions with the immobilization support. Interaction of the so called hydrophobic ‘lid’ with the support has been reported to affect synthetic activity of an immobilized lipase. In this work we evaluate and compare the synthetic activity of lipases from different sources immobilized on different kinds of supports with varying hydrophobicity. Humicola lanuginosa lipase, Candida antarctica lipase B and Rhizomucor miehei lipase were physically adsorbed onto two types of hydrophobic carriers, namely hydrophilic carriers with conjugated hydrophobic ligands, and supports with base matrix hydrophobicity. The prepared immobilized enzymes were used for acylation of n-butanol with oleic acid as acyl donor in iso-octane with variable water content (0–2.8%, v/v) as reaction medium. Enzyme activity and effect of water on the activity of the immobilized derivatives were compared with those of respective soluble lipases and a commercial immobilized lipase Novozyme 435. Both R. miehei and H. lanuginosa immobilized lipases showed maximum activity at 1.39% (v/v) added water concentration. Sepabeads, a methacrylate based hydrophilic support with conjugated octadecyl chain showed highest immobilized esterification (synthetic) activity for all three enzymes, and of the three R. miehei lipase displayed maximum esterification activity comparable to the commercial enzyme.     

Covalent immobilization of pure isoenzymes from lipase of Candida rugosa

Covalent immobilization of pure lipases A and B from Candida rugosa on agarose and silica is described. The immobilization increases the half-life of the biocatalysts ( ) with respect to the native pure lipases ( ). The percentage immobilization of lipases A and B is similar in both supports (33–40%). The remaining activity of the biocatalysts immobilized on agarose (70–75%) is greater than that of the enzymatic derivatives immobilized on SiO₂ (40–50%). The surface area and the hydrophobic/hydrophilic properties of the support control the lipase activity of these derivatives. The thermal stability of the immobilized lipase A derivatives is greater than that of lipase B derivatives. The nature of the support influences the thermal deactivation profile of the immobilized derivatives. The immobilization in agarose (hydrophilic support) gives biocatalysts that show a greater initial specific reaction rate than the biocatalysts immobilized in SiO₂ (hydrophobic support) using the hydrolysis of the esters of (R) or (S) 2-chloropropanoic and of (R,S) 2-phenylpropanoic acids as the reaction test. The enzymatic derivatives are active for at least 196 h under hydrolysis conditions. The stereospecificity of the native and the immobilized enzymes is the same.     

Conversion of β-sitosterol by Mycobacterium sp. NRRL B-3805 cells immobilized on Celite supports

Mycobacterium sp. NRRL B-3805 cells immobilized on Celite were effectively used for the selective side-chain cleavage of sitosterol to androstenedione (AD) in organic media (phthalate derivatives). Kinetic studies were performed with sitosterol concentrations up to 24 mM, with different Celite materials and particle sizes. Higher activity levels were observed when a larger pore size Celite was used as immobilization matrix. Substrate inhibition was observed for sitosterol concentrations above 6 mM. Toxicity effects were not apparently correlated with the high log P solvents (>9) here used as bioconversion media. The use of immobilized cells in repeated batch biotransformations did not prove effective, mainly due to biocatalyst desorption during the periodical, aqueous washing steps used for nutrient delivery to the cells.     

Exquisite regioselectivity and increased transesterification activity of an immobilized Bacillus subtilis protease

Commercially available proteases and lipases were screened for their ability to acylate regioselectively sucrose with divinyladipate either in pyridine or dimethylformamide (DMF). The protease (EC 3.4.21.62) from Bacillus subtilis (Proleather FG-F) exhibited the highest conversion (100% in 24 h of reaction in DMF) yielding sucrose 2-O-vinyladipate as main product. The enzyme preference for a secondary hydroxyl group is a distinct feature of this biocatalyst compared to others described in the literature. Two sets of chemically distinct silica supports were used for Proleather immobilization presenting terminal amino (S(APTES)) or hydroxyl groups (S(TESPM)(-)(pHEMA)). The percentage of immobilized enzyme was smaller in S(APTES) (7-17%) than in S(TESPM)(-)(pHEMA) (52-56%), yet Proleather immobilized into S(APTES) supports presented higher total and specific hydrolytic activity. The highest total and specific activities were obtained with S(TESPM)(-)(pHEMA) and S(APTES), respectively. Silicas with large pore (bimodal distribution of pores, 130/1200 A, denoted as S(1000)) presented higher specific activities relative to those with smaller pore sizes. Furthermore, the synthetic specific activity of S(1000)S(APTES) immobilized protease was ca. 10-fold higher than that of the free enzyme. In addition to sucrose, the immobilized protease was used to acylate methyl alpha-D-glucopyranoside, trehalose, and maltose in nearly anhydrous DMF. Finally, immobilized Proleather was reasonably stable, retaining ca. 55% activity after six reaction cycles.     

Kinetically controlled synthesis of monoglyceryl esters from chiral and prochiral acids methyl esters catalyzed by immobilized Rhizomucor miehei lipase

Partial acylation of only one primary hydroxyl group of glycerol generates a chiral center at position 2. Rhizomucor miehei lipase (RML) catalyzes the kinetically controlled transesterification of different aromatic carboxylic acids methyl esters with glycerol. High synthetic yields of glyceryl esters (around 70-80%) were obtained even in the presence of significant concentrations of water (from 5% to 20%). After a long incubation of the reaction mixture in the presence of the biocatalyst only pure free acid was obtained. Other lipases (from Geobacillus thermocatenulatus and from Thermomyces lanuginose) also catalyzed similar kinetically controlled transesterifications although less efficiently. RML immobilized on Sepharose-Q showed a high activity and specificity, compared to the immobilization by other techniques, only producing monoglyceryl esters with all substrates. In particular, monoglyceryl-phenylmalonate product was synthesized in 82% overall yield and >99% diastereomeric excess at pH 7.0 and 37 °C and 90% glycerol.     

Efficient immobilization of epoxide hydrolase onto silica gel and use in the enantioselective hydrolysis of racemic para-nitrostyrene oxide

Epoxide hydrolase from Aspergillus niger (E.C. 3.3.2.3) was immobilized by covalent linking to epoxide-activated silica gel under mild conditions. A very easy procedure allowed to prepare an immobilized biocatalyst with more than 90% retention of the initial enzymatic activity. Immobilized and free enzyme showed very similar behaviour with respect to the effect of pH on activity and stability. One benefit of immobilizing epoxide hydrolase from A. niger on silica gel was the enhanced enzyme stability in the presence of 20% DMSO. The kinetic resolution of racemic para-nitrostyrene oxide was investigated by using this new immobilized biocatalyst. The enantioselectivity of the enzyme was not altered by the immobilization reaction: both unreacted epoxide and formed diol were obtained with very high ee (99 and 92%, respectively). In addition, the biocatalyst could be easily separated from the reaction mixture and re-used for over nine cycles without any noticeable loss of enzymatic activity or change in the enantioselectivity extent. The activity of immobilized AnEH was retained for several months.     

Esterification of phenolic acids catalyzed by lipases immobilized in organogels

Lipases from Rhizomucor miehei and Candida antarctica B were immobilized in hydroxypropylmethyl cellulose organogels based on surfactant-free microemulsions consisting of n-hexane, 1-propanol and water. Both lipases kept their catalytic activity, catalyzing the esterification reactions of various phenolic acids including cinnamic acid derivatives. High reaction rates and yields (up to 94%) were obtained when lipase from C. antarctica was used. Kinetic studies have been performed and apparent kinetic constants were determined showing that ester synthesis catalyzed by immobilized lipases occurs via the Michaelis–Menten mechanism.     

Evaluation of regioselectivity of lipases based on synthesis reaction conducted with propyl alcohol, isopropyl alcohol and propylene glycol

Preliminary investigations on the regioselectiviy of various lipases were performed. Ten commercial lipases from different origins, including three immobilized lipases, were tested by esterification reaction between caprylic acid and propyl or isopropyl alcohol in n-hexane. Reaction products were analyzed with a gas chromatograph. Best yields were obtained with immobilized lipase IM60 from Rhizomucor miehei. Therefore, this enzyme was chosen as biocatalyst for a second step of regioselectiviy study with propylene glycol which bears primary and secondary alcohol groups. It was shown, by using several solvents, that polarity could influence the product profile in situations in which multiple products of various polarities can be formed. Furthermore, the major role of silica gel in reaction mixture was established.     

Performance of an immobilized fuculose-1-phosphate aldolase for stereoselective synthesis

A derivative of fuculose-1-phosphate aldolase, immobilized with high loading on glyoxal–agarose gels, has been characterized and evaluated as a biocatalyst for an aldol addition reaction. The reaction of the solid biocatalyst was diffusion-controlled for conversion of its natural substrate. Nevertheless, when catalyzing the synthesis of a biologically active aminopolyol, the lower reaction rate with non-natural substrates led to a process controlled by the intrinsic enzyme kinetics. The resulting biocatalyst has high synthetic specific activity and has been successfully used in batch synthesis reactions with high conversion. In addition, the immobilized aldolase has been employed in fed-batch synthesis, increasing the selectivity of the reaction and obtaining high conversion (88%).     

Modulation of lipase properties in macro-aqueous systems by controlled enzyme immobilization: enantioselective hydrolysis of a chiral ester by immobilized Pseudomonas lipase

Lipase from Pseudomonas fluorescens (PFL) has been immobilized by using different immobilization protocols. The catalytic behavior of the different PFL derivatives in the hydrolytic resolution of fully soluble (R,S) 2-hydroxy 4-phenyl butanoic acid ethyl ester (HPBE) in aqueous medium was analyzed. The soluble enzyme showed a significant but low enantioselectivity, hydrolyzing the S isomer more rapidly than the R-isomer (E = 7). The enzyme, immobilized via a limited attachment to a long and flexible spacer arm, showed almost identical activity and specificity to the soluble enzyme. However, other derivatives, e.g. PFL adsorbed on supports covered by hydrophobic moieties (octyl, decaoctyl), exhibited significant hyperactivation on immobilization (approximately 7-fold). Simultaneously, the enantioselectivity of the PFL-immobilized enzyme was significantly improved (from E = 7 to E = 80). By using such derivatives, almost pure R ester isomer (e.e. > 99%) has been obtained after 55% hydrolysis of the racemic mixture of a solution of 10% (w/v) (R,S) HPBE. The derivatives could be used for 10 cycles without any significant decrease in the activity of the biocatalyst.     

Immobilization of lipases on different carriers and their use in synthesis of pentyl isovalerates

Porcine pancreatic lipase (PPL) and Candida cylindracea lipase (CCL) were immobilized on Celite and Amberlite IRA 938 by deposition from the aqueous solution by the addition of hexane. The influence of the immobilization on the activities of the immobilized lipase derivatives has been studied. The immobilized lipases were used in synthesis of pentyl isovalerates. Various reaction parameters affecting the synthesis of pentyl isovalerates were investigated. The reaction rates were compared with the rates of esterification with free lipases. The immobilized lipases were found to be very effective in the esterification reaction. The lipases immobilized on Celite 545 exhibited better operational stabilities than that of immobilized on Amberlite IRA-938.     

利用Sed1p锚定蛋白在毕赤酵母表面展示米黑根毛霉脂肪酶及其应用

通过PCR扩增米黑根毛霉脂肪酶基因,在米黑根毛霉脂肪酶N端加入Flag标签。将米黑根毛霉脂肪酶基因与酿酒酵母细胞壁蛋白Sed1p基因的N端融合构建质粒pPIC9K-Flag-RML-Sed1,转化毕赤酵母GS115获得重组菌GS115/pPIC9K-Flag-RML-Sed1。重组菌经过甲醇诱导表达后,显微镜免疫荧光分析与流式细胞仪检测结果均证实米黑根毛霉脂肪酶已经成功展示在毕赤酵母上。该重组菌水解活力达到169.6U/g(Dry cell weight),在非水相中催化脂肪酸甲酯的合成,72h后脂肪酸甲酯的产率达82.36%。     

Enantioselective hydrolysis of (R,S)-naproxen 2,2,2-trifluoroethyl ester in water-saturated solvents via lipases from Carica pentagona Heilborn and Carica papaya

A crude lipase prepared from Carica pentagona Heilborn latex was explored as an effective enantioselective biocatalyst for the hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl ester in water-saturated organic solvents. Comparisons of the enzyme performance with that from Carica papaya lipase indicated that both lipases showed low tolerance to the hydrophilic solvent and were inhibited by (S)-naproxen and 2,2,2-trifluoroethanol. Improvements on the enzyme activity and enantioselectivty were demonstrated when both lipases in partially purified forms were employed. By using the thermodynamic analysis, the enantiomeric discrimination was mainly driven by the difference of activation enthalpy for all reaction systems except for employing Carica papaya lipase as the biocatalyst for (R,S)-fenoprofen 2,2,2-trifluoroethyl thioester.     

Stabilization of an intracellular Mucor circinelloides lipase for application in non-aqueous media

Different methods for stabilization of Mucor circinelloides lipase, facilitating its application in organic solvents were tested. Lipase was either isolated from the mycelium and immobilized on solid carriers (derivatives of cellulose, diatomaceous earth, modified porous glass) or immobilized in situ in the mycelium pellets and stabilized. The immobilized enzyme preparations were used for synthesis of sucrose, glucose, butyl and propyl oleates and caprylates, carried out in petroleum and di-n-pentyl ethers. Immobilized preparations of either crude or purified lipase isolated from the mycelium were at least 4–6 times less effective in sucrose esters synthesis than mycelium-bound lipase preparations. Lipase preparation with the highest synthetic activity was obtained by cross-linking of M. circinelloides mycelium pellets with glutardialdehyde (operational stability in sucrose caprylate synthesis was 94% after 4 runs (24 h each), and caprylic acid conversion was 91–85%). The best method for production of mechanically durable biocatalyst, which efficiently catalyzed sucrose esters synthesis, was found to be entrapment of the mycelium-bound lipase in polyvinyl pyrrolidone-containing chitosan beads solidified with hexametapolyphosphate.     

Meetings & Symposia

Abstract

Porcine pancreatic lipase (PPL) and Candida cylindracea lipase (CCL) were immobilized on Celite and Amberlite IRA 938 by deposition from the aqueous solution by the addition of hexane. The influence of the immobilization on the activities of the immobilized lipase derivatives has been studied. The immobilized lipases were used in synthesis of pentyl isovalerates. Various reaction parameters affecting the synthesis of pentyl isovalerates were investigated. The reaction rates were compared with the rates of esterification with free lipases. The immobilized lipases were found to be very effective in the esterification reaction. The lipases immobilized on Celite 545 exhibited better operational stabilities than that of immobilized on Amberlite IRA‐938.     

Enzymatic esterification of dihydrocaffeic acid with linoleyl alcohol in organic solvent media

The enzymatic esterification of dihydrocaffeic acid with linoleyl alcohol, using immobilized lipases (Lipozyme IM 20 and Novozym 435), was investigated in selected organic solvent media. Novozym 435 was found to be more efficient for catalyzing the esterification reaction. The highest enzymatic activity of 0.89 μmol esterified linoleyl alcohol/g solid enzyme/min was obtained in a hexane/2-butanone mixture of 75:25 (v/v), with an esterification yield of 75%; however, an increase in the 2-butanone proportion in the mixture up to 50% (v/v) resulted in a decrease in enzymatic activity and esterification yield to 0.38 μmol esterified linoleyl alcohol/g solid enzyme/min and 40%, respectively. The maximum esterification yield of 99.3% was obtained with a dihydrocaffeic acid to linoleyl alcohol ratio of 1:8. The electrospray ionization-mass spectroscopic structural analysis of the end products confirmed the biosynthesis of dihydrocaffeic acid ester of linoleyl alcohol, which demonstrated an anti-radical activity using 2,2-diphenyl-1-picrylhydrazyl as a radical model.     

A single step purification, immobilization, and hyperactivation of lipases via interfacial adsorption on strongly hydrophobic supports

A number of bacterial lipases can be immobilized in a rapid and strong fashion on octyl-agarose gels (e.g., lipases from Candida antarctica, Pseudomonas fluorescens, Rhizomucor miehei, Humicola lanuginosa, Mucor javanicus, and Rhizopus niveus). Adsorption rates in absence of ammonium sulfate are higher than in its presence, opposite to the observation for typical hydrophobic adsorption of proteins. At 10 mM phosphate, adsorption of lipases is fairly selective allowing enzyme purification associated with their reversible immobilization. Interestingly, these immobilized lipase molecules show a dramatic hyperactivation. For example, lipases from R. niveus, M. miehei, and H. lanuginosa were 6-, 7-, and 20-fold more active than the corresponding soluble enzymes when catalyzing the hydrolysis of a fully soluble substrate (0.4 mM p-nitrophenyl propionate). Even higher hyperactivations and interesting changes in stereospecificity were also observed for the hydrolysis of larger soluble chiral esters (e.g. (R,S)-2-hydroxy-4-phenylbutanoic ethyl ester). These results suggest that lipases recognize these "well-defined" hydrophobic supports as solid interfaces and they become adsorbed through the external areas of the large hydrophobic active centers of their "open and hyperactivated structure". This selective interfacial adsorption of lipases becomes a very promising immobilization method with general application for most lipases. Through this method, we are able to combine, via a single and easily performed adsorption step, the purification, the strong immobilization, and a dramatic hyperactivation of lipases acting in the absence of additional interfaces, (e.g., in aqueous medium with soluble substrate). Copyright 1998 John Wiley & Sons, Inc.