Cytochemical detection of polysaccharides on the surface of the cell membrane complex in fungi

Cytochemical staining in toto (periodic acid, thiosemicarbazide, O_SO₄) revealed the presence of polysaccharide lamellae on the surface of the cell membrane complex of fungi. The membraneous clusters in the vacuolar bodies of Claviceps purpurea were covered with these lamellae at both surfaces, as it was also the case with the endoplasmic reticulum membranes, the tonoplast and the cytoplasmic membrane. In Saccharomyces cerevisiae, the polysaccharide lamellae were visible on the surface of the endoplasmic reticulum membranes and the plasmalemma; the strain revealed polysaccharide deposits also on the tonoplasts of small vacuoles and in glucanase vesicles. We assume that these observations give precision to the localization of the enzymes synthetizing the glycoprotein components of the fungal cell wall.     

Polysaccharides of Crithidia fasciculata: Identification and partial characterization of a cell surface constituent

A carbohydrate-containing fraction was extracted from the trypanosomatid Crithidia fasciculata by a phenol-water procedure. Ion-exchange chromatography separated this fraction into three components: a polysaccharide which was not retained on the column; RNA which eluted upon addition of salt; and, another polysaccharide which eluted upon addition of detergent. The unretained fraction was shown to be composed solely of d-mannose. The mannan, which was heterodisperse on Sephadex G-100, had an average molecular weight of approx. 14 000 as based on analysis of reducing groups. The detergent-eluted material yielded arabinose and galactose upon acid hydrolysis. The arabinogalactan was excluded from Sephadex G-100 and Sephacryl S-200 molecular sieve columns, suggesting a molecular weight ≥ 200 000. Cell fractionation studies showed the bulk of extractable polysaccharide was associated with a particulate fraction. Further determination of the cellular localization of the polysaccharide was accomplished by employing a specific antiserum prepared from rabbits immunized with the polysaccharide extract. The cell surface localization of the arabinogalactan was demonstrated by cell agglutination studies as well as immunocytochemical techniques using fluorescein and ferritin conjugated antibodies.     

Streptococcus mutans SMU.623c codes for a functional, metal-dependent polysaccharide deacetylase that modulates interactions with salivary agglutinin

The genome sequence of the oral pathogen Streptococcus mutans predicts the presence of two putative polysaccharide deacetylases. The first, designated PgdA in this paper, shows homology to the catalytic domains of peptidoglycan deacetylases from Streptococcus pneumoniae and Listeria monocytogenes, which are both thought to be involved in the bacterial defense mechanism against human mucosal lysozyme and are part of the CAZY family 4 carbohydrate esterases. S. mutans cells in which the pgdA gene was deleted displayed a different colony texture and a slightly increased cell surface hydrophobicity and yet did not become hypersensitive to lysozyme as shown previously for S. pneumoniae. To understand this apparent lack of activity, the high-resolution X-ray structure of S. mutans PgdA was determined; it showed the typical carbohydrate esterase 4 fold, with metal bound in a His-His-Asp triad. Analysis of the protein surface showed that an extended groove lined with aromatic residues is orientated toward the active-site residues. The protein exhibited metal-dependent de-N-acetylase activity toward a hexamer of N-acetylglucosamine. No activity was observed toward shorter chitooligosaccharides or a synthetic peptidoglycan tetrasaccharide. In agreement with the lysozyme data this would suggest that S. mutans PgdA does not act on peptidoglycan but on an as-yet-unidentified polysaccharide within the bacterial cell surface. Strikingly, the pgdA-knockout strain showed a significant increase in aggregation/agglutination by salivary agglutinin, in agreement with this gene acting as a deacetylase of a cell surface glycan.     

Deletion of Integron-Associated Gene Cassettes Impact on the Surface Properties of Vibrio rotiferianus DAT722

Background

The integron is a genetic recombination system that catalyses the acquisition of genes on mobilisable elements called gene cassettes. In Vibrio species, multiple acquired gene cassettes form a cassette array that can comprise 1–3% of the bacterial genome. Since 75% of these gene cassettes contain genes encoding proteins of uncharacterised function, how the integron has driven adaptation and evolution in Vibrio species remains largely unknown. A feature of cassette arrays is the presence of large indels. Using Vibrio rotiferianus DAT722 as a model organism, the aim of this study was to determine how large cassette deletions affect vibrio physiology with a view to improving understanding into how cassette arrays influence bacterial host adaptation and evolution.

Methodology/Principal Findings

Biological assays and proteomic techniques were utilised to determine how artificially engineered deletions in the cassette array of V. rotiferianus DAT722 affected cell physiology. Multiple phenotypes were identified including changes to growth and expression of outer membrane porins/proteins and metabolic proteins. Furthermore, the deletions altered cell surface polysaccharide with Proton Nuclear Magnetic Resonance on whole cell polysaccharide identifying changes in the carbohydrate ring proton region indicating that gene cassette products may decorate host cell polysaccharide via the addition or removal of functional groups.

Conclusions/Significance

From this study, it was concluded that deletion of gene cassettes had a subtle effect on bacterial metabolism but altered host surface polysaccharide. Deletion (and most likely rearrangement and acquisition) of gene cassettes may provide the bacterium with a mechanism to alter its surface properties, thus impacting on phenotypes such as biofilm formation. Biofilm formation was shown to be altered in one of the deletion mutants used in this study. Reworking surface properties may provide an advantage to the bacterium’s interactions with organisms such as bacteriophage, protozoan grazers or crustaceans.     

Characterization of the Caulobacter crescentus holdfast polysaccharide biosynthesis pathway reveals significant redundancy in the initiating glycosyltransferase and polymerase steps

Caulobacter crescentus cells adhere to surfaces by using an extremely strong polar adhesin called the holdfast. The polysaccharide component of the holdfast is comprised in part of oligomers of N-acetylglucosamine. The genes involved in the export of the holdfast polysaccharide and the anchoring of the holdfast to the cell were previously discovered. In this study, we identified a cluster of polysaccharide biosynthesis genes (hfsEFGH) directly adjacent to the holdfast polysaccharide export genes. Sequence analysis indicated that these genes are involved in the biosynthesis of the minimum repeat unit of the holdfast polysaccharide. HfsE is predicted to be a UDP-sugar lipid-carrier transferase, the glycosyltransferase that catalyzes the first step in polysaccharide biosynthesis. HfsF is predicted to be a flippase, HfsG is a glycosyltransferase, and HfsH is similar to a polysaccharide (chitin) deacetylase. In-frame hfsG and hfsH deletion mutants resulted in severe deficiencies both in surface adhesion and in binding to the holdfast-specific lectin wheat germ agglutinin. In contrast, hfsE and hfsF mutants exhibited nearly wild-type levels of adhesion and holdfast synthesis. We identified three paralogs to hfsE, two of which are redundant to hfsE for holdfast synthesis. We also identified a redundant paralog to the hfsC gene, encoding the putative polysaccharide polymerase, and present evidence that the hfsE and hfsC paralogs, together with the hfs genes, are absolutely required for proper holdfast synthesis.     

Cryptococcus neoformans Biofilm Formation Depends on Surface Support and Carbon Source and Reduces Fungal Cell Susceptibility to Heat, Cold, and UV Light

The fungus Cryptococcus neoformans possesses a polysaccharide capsule and can form biofilms on medical devices. We describe the characteristics of C. neoformans biofilm development using a microtiter plate model, microscopic examinations, and a colorimetric 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino) carbonyl]-2H-tetrazolium-hydroxide (XTT) reduction assay to observe the metabolic activity of cryptococci within a biofilm. A strong correlation between XTT and CFU assays was demonstrated. Chemical analysis of the exopolymeric material revealed sugar composition consisting predominantly of xylose, mannose, and glucose, indicating the presence of other polysaccharides in addition to glucurunoxylomannan. Biofilm formation was affected by surface support differences, conditioning films on the surface, characteristics of the medium, and properties of the microbial cell. A specific antibody to the capsular polysaccharide of this fungus was used to stain the extracellular polysaccharide matrix of the fungal biofilms using light and confocal microscopy. Additionally, the susceptibility of C. neoformans biofilms and planktonic cells to environmental stress was investigated using XTT reduction and CFU assays. Biofilms were less susceptible to heat, cold, and UV light exposition than their planktonic counterparts. Our findings demonstrate that fungal biofilm formation is dependent on support surface characteristics and that growth in the biofilm state makes fungal cells less susceptible to potential environmental stresses.     

Changes in the Endosperm Cell Walls of Two Datura Species before Radicle Protrusion

The possibility of an association between changes in cell walls of the micropylar portion of the endosperm and the induction of germination was explored in seeds of Datura ferox and Datura stramonium. The structure of the inner surface of the endosperm was studied by scanning electron microscopy and the composition of cell wall polysaccharides analyzed by gas chromatography and gas chromatography-mass spectrometry. Both scanning electron microscope images and chemical analysis showed changes in the micropylar portion of the endosperm in induced seeds before radicle protrusion. The inner surface of the endosperm appeared eroded, and in some areas, wall material seemed to be missing. The content of the main component of the cell wall polysaccharides, containing predominantly 4-linked mannose, decreased well before the emergence of the radicle through the endosperm. We propose that the degradation of a mannan type polysaccharide is an important factor in the reduction in mechanical strength of the endosperm, thus facilitating germination.     

Characterization of Soy Polysaccharide and Its In Vitro and In Vivo Evaluation for Application in Colon Drug Delivery

The objective of the present investigation was to establish potential of commercially available soy polysaccharide (Emcosoy®) for colon drug delivery. The soy polysaccharide–ethyl cellulose films were fabricated and characterized. The effect of the pectinase enzyme on the tensile strength and surface morphology of the film was evaluated. The permeation of chlorpheniramine maleate (CPM), a model hydrophilic drug from pectinase enzyme treated and untreated films was measured in pH 7.4 buffer. The soy polysaccharide–ethyl cellulose films were also incubated with Lactobacillus sp. culture for a specific duration, and effect on the CPM permeation was evaluated. The CPM capsules were coated with the soy polysaccharide–ethyl cellulose mixture, and Eudragit S100 was applied as a secondary coat. The coated CPM capsules were radiolabelled, and their in vivo transit was evaluated in human volunteers on oral administration. The pectinase enzyme had a significant influence on the tensile strength and surface morphology of the soy polysaccharide–ethyl cellulose films. The permeability of pectinase enzyme-treated and Lactobacillus sp.-treated films was significantly higher than that of untreated films. The CPM capsules were coated with the soy polysaccharide–ethyl cellulose mixture and Eudragit S100 and were successfully radiolabelled by a simple method. Gamma scintigraphic studies in human volunteers showed that the radiolabelled capsules maintained integrity for at least 9 h after oral administration. Thus, the soy polysaccharide has a potential in colon drug delivery.     

The linkage between the polysaccharide and mucopeptide components of the cell wall of Lactobacillus casei

1. The linkage between the polysaccharide and mucopeptide components of the cell wall of Lactobacillus casei is rapidly hydrolysed under mild acid-hydrolysis conditions. 2. The release of the polysaccharide is accompanied by the hydrolysis of an N-acetylhexosaminide linkage. The N-acetylhexosamine residue readily forms chromogen and it is concluded that it is substituted on C₍₃₎ by the adjacent sugar. 3. Continued heating of the polysaccharide in acid results in a slower release of reactive N-acetylhexosamine due to the hydrolysis of glycosidic linkages within the polysaccharide. 4. After the linkage between the polysaccharide and mucopeptide has been hydrolysed, acid phosphatase will release approx. 40% of the total phosphorus as inorganic phosphate. 5. It is concluded that the polysaccharide component of the cell wall is joined through its reducing end group to a phosphate grouping in the mucopeptide.     

INCORPORATION OF SULFATE INTO THE CAPSULAR POLYSACCHARIDE OF THE RED ALGA PORPHYRIDIUM

The accumulation of sulfate-³⁵S by Porphyridium aerugineum cells and subsequent appearance of solubilized capsular polysaccharide-³⁵S in the growth medium were examined The uptake of label by the cells was largely light dependent. Pulse-chase experiments using log phase cells revealed a rapid labeling of solubilized capsular polysaccharide, recovered from the medium as the cetylpyridinium chloride precipitate Polyacrylamide gel electrophoresis of the polysaccharide-³⁵S showed the sulfate to be firmly bound to an immobile fraction. Sephadex chromatography revealed the molecular weight of the polysaccharide to be in excess of 2 x 10⁵. Acid hydrolysis of the polysaccharide-³⁵S released sulfate-³⁵S ion as evidenced by radioautography of thin layer chromatographs Preliminary electron microscope evidence suggests that the synthesis, movement, and deposition of the capsular polysaccharide on the cell surface are Golgi complex-mediated processes     

The Major Surface-Associated Saccharides of Klebsiella pneumoniae Contribute to Host Cell Association

Analysing the pathogenic mechanisms of a bacterium requires an understanding of the composition of the bacterial cell surface. The bacterial surface provides the first barrier against innate immune mechanisms as well as mediating attachment to cells/surfaces to resist clearance. We utilised a series of Klebsiella pneumoniae mutants in which the two major polysaccharide layers, capsule and lipopolysaccharide (LPS), were absent or truncated, to investigate the ability of these layers to protect against innate immune mechanisms and to associate with eukaryotic cells. The capsule alone was found to be essential for resistance to complement mediated killing while both capsule and LPS were involved in cell-association, albeit through different mechanisms. The capsule impeded cell-association while the LPS saccharides increased cell-association in a non-specific manner. The electrohydrodynamic characteristics of the strains suggested the differing interaction of each bacterial strain with eukaryotic cells could be partly explained by the charge density displayed by the outermost polysaccharide layer. This highlights the importance of considering not only specific adhesin:ligand interactions commonly studied in adherence assays but also the initial non-specific interactions governed largely by the electrostatic interaction forces.     

Vibrio parahaemolyticus ScrC modulates cyclic dimeric GMP regulation of gene expression relevant to growth on surfaces

In Vibrio parahaemolyticus, scrC participates in controlling the decision to be a highly mobile swarmer cell or a more adhesive, biofilm-proficient cell type. scrC mutants display decreased swarming motility over surfaces and enhanced capsular polysaccharide production. ScrC is a cytoplasmic membrane protein that contains both GGDEF and EAL conserved protein domains. These domains have been shown in many organisms to respectively control the formation and degradation of the small signaling nucleotide cyclic dimeric GMP (c-di-GMP). The scrC gene is part of the three-gene scrABC operon. Here we report that this operon influences the cellular nucleotide pool and that c-di-GMP levels inversely modulate lateral flagellar and capsular polysaccharide gene expression. High concentrations of this nucleotide prevent swarming and promote adhesiveness. Further, we demonstrate that ScrC has intrinsic diguanylate cyclase and phosphodiesterase activities, and these activities are controlled by ScrAB. Specifically, ScrC acts to form c-di-GMP in the absence of ScrA and ScrB; whereas ScrC acts to degrade c-di-GMP in the presence of ScrA and ScrB. The scrABC operon is specifically induced by growth on a surface, and the analysis of mutant phenotypes supports a model in which the phosphodiesterase activity of ScrC plays a dominant role during surface translocation and in biofilms.     

Effect of Nitrogen on Polysaccharide Production in a Porphyridium sp

Porphyridium cultures grown on either nitrate or ammonium as the nitrogen source showed similar patterns of growth and cell wall polysaccharide production. The effect of nitrogen on growth and cell wall polysaccharide production was studied by applying three regimens of supply: batch mode, in which nitrate was supplied at the beginning of the experiment and became depleted at day 6; continual mode, in which nitrate was added daily; and deficient mode, in which the cells were cultured in a nitrate-free medium. Growth was similar in the batch- and continual-mode cultures, whereas it was totally inhibited in the deficient-mode culture. Polysaccharide content (per volume) was highest in the batch-mode culture and lowest in the deficient-mode culture. However, polysaccharide production per cell was similar in the continual- and deficient-mode cultures, the highest value being found in the batch-mode culture. In addition to its effect on polysaccharide content, nitrogen affected the polysaccharide distribution between soluble and bound polysaccharides. In the deficientmode culture, most of the cell wall polysaccharide was dissolved in the medium.     

Polysaccharides of the cellular slime mold II. Change of intra- and extracellular polysaccharides during growth phase of Dictyostelium discoideum NC-4

The three intra- and extracellular polysaccharide fractions were isolated during the growth phase of Dictyostelium discoideum NC-4, and the change in content of component sugars of four fractions during the culture period was examined. Myxamoebae most extensively contain a polysaccharide fraction extracted with phenol-water (polysaccharide fraction I) in a quantity of about 15–23% per dry cell. After 15 h the uronic acid formed in the polysaccharide fraction I, and the cell, could be aggregated. The glucosamine content in the polysaccharide fraction I reached a maximum as the myxamoebae entered the exponential phase, and a large amount of galactose was produced as the cell entered the stationary phase. The phenol-water extract from the cells of the stationary phase was reacted with concanavalin-A.     

Molecular mechanism of lipopolysaccharide (LPS) in promoting biomineralization on bacterial surface

Biomineralization on bacterial surface is affected by biomolecules of bacterial cell surface. Lipopolysaccharide (LPS) is the main and outermost component on the extracellular membrane of Gram-negative bacteria. In the present study, the molecular mechanism of LPS in affecting biomineralization of Ag⁺/Cl^? colloids was investigated by taking advantages of two LPS structural deficient mutants of Escherichia coli. The two mutants were generated by impairing the expression of waaP or wbbH genes with CRISPR/Cas9 technology and it induced deficient polysaccharide chain of O-antigen (ΔwbbH) or phosphate groups of core oligosaccharide (ΔwaaP) in LPS structures. There were significant changes of the cell morphology and surface charge of the two mutants in comparing with that of wild type cells. LPS from ΔwaaP mutant showed increased ΔH_ITC upon interacting with free Ag⁺ ions than LPS from wild type cells or ΔwbbH mutant, implying the binding affinity of LPS to Ag⁺ ions is affected by the phosphate groups in core oligosaccharide. LPS from ΔwbbH mutant showed decreased endotherm (ΔQ) upon interacting with Ag⁺/Cl^? colloids than LPS from wild type or ΔwaaP mutant cells, implying LPS polysaccharide chain structure is critical for stabilizing Ag⁺/Cl^? colloids. Biomineralization of Ag⁺/Cl^? colloids on ΔwbbH mutant cell surface showed distinctive morphology in comparison with that of wild type or ΔwaaP mutant cells, which confirmed the critical role of O-antigen of LPS in biomineralization. The present work provided molecular evidence of the relationship between LPS structure, ions, and ionic colloids in biomineralization on bacterial cell surface.     

Influence of O Polysaccharides on Biofilm Development and Outer Membrane Vesicle Biogenesis in Pseudomonas aeruginosa PAO1

Pseudomonas aeruginosa is a common opportunistic human pathogen known for its ability to adapt to changes in its environment during the course of infection. These adaptations include changes in the expression of cell surface lipopolysaccharide (LPS), biofilm development, and the production of a protective extracellular exopolysaccharide matrix. Outer membrane vesicles (OMVs) have been identified as an important component of the extracellular matrix of P. aeruginosa biofilms and are thought to contribute to the development and fitness of these bacterial communities. The goal of this study was to examine the relationships between changes in the cell surface expression of LPS O polysaccharides, biofilm development, and OMV biogenesis in P. aeruginosa. We compared wild-type P. aeruginosa PAO1 with three chromosomal knockouts. These knockouts have deletions in the rmd, wbpM, and wbpL genes that produce changes in the expression of common polysaccharide antigen (CPA), O-specific antigen (OSA), or both. Our results demonstrate that changes in O polysaccharide expression do not significantly influence OMV production but do affect the size and protein content of OMVs derived from both CPA⁻ and OSA⁻ cells; these mutant cells also exhibited different physical properties from wild-type cells. We further examined biofilm growth of the mutants and determined that CPA⁻ cells could not develop into robust biofilms and exhibit changes in cell morphology and biofilm matrix production. Together these results demonstrate the importance of O polysaccharide expression on P. aeruginosa OMV composition and highlight the significance of CPA expression in biofilm development.     

Model System for Growing and Quantifying Streptococcus pneumoniae Biofilms In Situ and in Real Time

Streptococcus pneumoniae forms biofilms, but little is known about its extracellular polymeric substances (EPS) or the kinetics of biofilm formation. A system was developed to enable the simultaneous measurement of cells and the EPS of biofilm-associated S. pneumoniae in situ over time. A biofilm reactor containing germanium coupons was interfaced to an attenuated total reflectance (ATR) germanium cell of a Fourier transform infrared (FTIR) laser spectrometer. Biofilm-associated cells were recovered from the coupons and quantified by total and viable cell count methods. ATR-FTIR spectroscopy of biofilms formed on the germanium internal reflection element (IRE) of the ATR cell provided a continuous spectrum of biofilm protein and polysaccharide (a measure of the EPS). Staining of the biofilms on the IRE surface with specific fluorescent probes provided confirmatory evidence for the biofilm structure and the presence of biofilm polysaccharides. Biofilm protein and polysaccharides were detected within hours after inoculation and continued to increase for the next 141 h. The polysaccharide band increased at a substantially higher rate than did the protein band, demonstrating increasing coverage of the IRE surface with biofilm polysaccharides. The biofilm total cell counts on germanium coupons stabilized after 21 h, at approximately 10⁵ cells per cm², while viable counts decreased as the biofilm aged. This system is unique in its ability to detect and quantify biofilm-associated cells and EPS of S. pneumoniae over time by using multiple, corroborative techniques. This approach could prove useful for the study of biofilm processes of this or other microorganisms of clinical or industrial relevance.     

Characterization of a 3-linked galactan from pinus radiata callus cells

A polysaccharide was obtained in the neutral fraction of a hot water extract (100°) of cell walls, by DEAE ion exchange chromatography, from callus of Pinus radiata cells. The polysaccharide was found by sugar analysis to be composed predominantly of galactose, and methylation analysis showed it to be 3-linked. The anomeric configuration was not determined.     

Direct and Efficient Production of Ethanol from Cellulosic Material with a Yeast Strain Displaying Cellulolytic Enzymes

For direct and efficient ethanol production from cellulosic materials, we constructed a novel cellulose-degrading yeast strain by genetically codisplaying two cellulolytic enzymes on the cell surface of Saccharomyces cerevisiae. By using a cell surface engineering system based on α-agglutinin, endoglucanase II (EGII) from the filamentous fungus Trichoderma reesei QM9414 was displayed on the cell surface as a fusion protein containing an RGSHis6 (Arg-Gly-Ser-His₆) peptide tag in the N-terminal region. EGII activity was detected in the cell pellet fraction but not in the culture supernatant. Localization of the RGSHis6-EGII-α-agglutinin fusion protein on the cell surface was confirmed by immunofluorescence microscopy. The yeast strain displaying EGII showed significantly elevated hydrolytic activity toward barley β-glucan, a linear polysaccharide composed of an average of 1,200 glucose residues. In a further step, EGII and β-glucosidase 1 from Aspergillus aculeatus No. F-50 were codisplayed on the cell surface. The resulting yeast cells could grow in synthetic medium containing β-glucan as the sole carbon source and could directly ferment 45 g of β-glucan per liter to produce 16.5 g of ethanol per liter within about 50 h. The yield in terms of grams of ethanol produced per gram of carbohydrate utilized was 0.48 g/g, which corresponds to 93.3% of the theoretical yield. This result indicates that efficient simultaneous saccharification and fermentation of cellulose to ethanol are carried out by a recombinant yeast cells displaying cellulolytic enzymes.     

Utilization of unhydrolyzed cheese whey for the production of extracellular polysaccharide by Xanthomonas cucurbitae PCSIR B-52

A strain of Xanthomonas cucurbitae PCSIR B-52 produced extracellular polysaccharide using partially deproteinized cheese whey without hydrolysis. A synthetic lactose-salt medium was also utilized to determine the optiomum level of lactose desirable for successfull fermentation. The amount of extracellular polysaccharide was maximised at 7.8 gl⁻¹ in the presence of 40 gl⁻¹ lactose. The bacterium efficiently consumed cheese whey, particularly in the presence of corn steep liquor and penicillin waste mycelium in shaken flasks. The polysaccharide, bacterial cell mass and viscosity gradients were improved as a result of efficient oxygen transfer in a mechanically agitated fermentor. A depletion in dissolved oxygen tension resulted during the exponential growth phase. The fermentation pattern of extracellular polysaccharide was also studied by repeated batch process.