Synthesis,characterization and DNA binding studies of a ruthenium(II) complex

[Ru(bzimpy)(2)]Cl(2), where bzimpy is 2,6-bis(benzimidazol-2-yl) pyridine was synthesized and characterized by ESI-MS, UV-Visible, (1)H NMR and fluorescence spectra. Absorption titration and thermal denaturation experiments indicate that the complex binds to DNA with moderate strength. Viscosity measurement shows that the mode of binding could be surface binding. Fluorescence study shows that the fluorescence intensity of the complex decreases with increasing concentrations of DNA, which is due to the photoelectron transfer from guanine base to (3)MLCT of the complex. Photoexcitation of the complex in the MLCT region in the presence of plasmid DNA has been found to give rise to nicking of DNA.     

Synthesis, characterization and DNA binding studies of a zinc complex with 2,6-bis(benzimidazol-2-yl) pyridine

A zinc(II) complex having planar tridentate ligand, bzimpy, where bzimpy is 2,6-bis(benzimidazol-2-yl) pyridine was synthesized and characterized by UV, NMR, infrared spectroscopy and fluorescence spectra. The zinc complex acts as dibasic acids, in which N-H protons on benzimidazole moieties are responsible for a deprotonation site. Both the absorption spectra and reduction potentials are strongly dependent on the solution pH, which leads to the basis of a proton-induced molecular switch. The binding of this complex with calf thymus DNA has been investigated by absorption, luminescence titrations and viscosity measurements. The results suggest that the zinc(II) complex intercalates into DNA base pairs via the ligand bzimp.     

Oxidative cleavage of DNA by tridentate copper (II) complex

Copper (II) complex 1 having planar tridentate ligand, bzimpy, where bzimpy is 2,6-bis(benzimidazo-2-yl) pyridine was synthesized and characterized by UV-visible, FAB (fast atom bombardment) mass and infrared spectroscopy. From absorption titration data, the binding constant of Cu(II) with DNA was calculated to be (1.8+/-0.02)x10(4) M(-1). Thermal denaturation study of DNA with 1 revealed deltaT(m) of 5+/-0.5 degrees C. Viscosity measurement showed that complex binds with DNA through intercalative mode. Copper (II) complex induces cleavage in plasmid DNA in the presence of coreductants such as ascorbic acid or glutathione.     

Formation of Cu(II)-brazilin complex in the presence of DNA and its activities as chemical nuclease

Brazilin, a traditional medicine for the treatment of pain and inflammation, forms a complex with Cu(II) in the presence as well as the absence of DNA. The Cu(II)-brazilin complex exhibited the strand cleavage activity for the pBR322 supercoiled DNA, converting supercoiled form to nicked form. The presence of various scavengers for the oxygen species suppresses or reduces the cleavage activity of the complex, indicating that the DNA cleavage is oxidative. The binding mode of the Cu(II)-brazilin complex was studied by absorption and CD spectroscopy. While a large metal-to-ligand charge transfer (MLCT) band was apparent when Cu(II) and brazilin was mixed in the presence and absence of DNA, the CD did not show any signal in the same region in the presence of DNA, suggesting a weak interaction between the Cu(II)-brazilin complex and DNA bases.     

Rapid binding of T7 RNA polymerase is followed by simultaneous bending and opening of the promoter DNA

To form a functional open complex, bacteriophage T7 RNA polymerase (RNAP) binds to its promoter DNA and induces DNA bending and opening. The objective of this study was to elucidate the temporal coupling in DNA binding, bending, and opening processes that occur during initiation. For this purpose, we conducted a combined measurement of stopped-flow fluorescence anisotropy, fluorescence resonance energy transfer (FRET), and 2-aminopurine fluorescence. Stopped-flow anisotropy measurements provided direct evidence of an intermediate resulting from rapid binding of the promoter to T7 RNA polymerase. Stopped-flow FRET measurements showed that promoter bending occurred at a rate constant that was slower than the initial DNA binding rate constant, indicating that the initial complex was not significantly bent. Similarly, stopped-flow 2-aminopurine fluorescence changes showed that promoter opening occurred at a rate constant that was slower than the initial DNA binding rate constant, indicating that the initial complex was not significantly melted. The indistinguishable observed rate constants of FRET and 2-aminopurine fluorescence changes indicate that DNA bending and opening processes are temporally coupled and these DNA conformational changes take place after the DNA binding step. The results in this paper are consistent with the mechanism in which the initial binding of T7 RNAP to the promoter results in a closed complex, which is then converted into an open complex in which the promoter is both sharply bent and melted.     

Picosecond Kerr-gated time-resolved resonance Raman spectroscopy of the [Ru(phen)(2)dppz](2+) interaction with DNA

To investigate the basis of the 'light-switch' effect, the solvent dependence of the Kerr-gated picosecond-time resolved resonance Raman (TR(3)) spectra of [Ru(bpy)(2)dppz](2+), [Ru(phen)(2)dppz](2+), and the modified complex [Ru(phen)(2)cpdppzOMe](2+) and a dimer [mu-C4(cpdppz)(2)-(phen)(4)Ru(2)](4+) were studied. The investigation focussed on comparing the behaviour of [Ru(phen)(2)dppz](2+) in acetonitrile, ethanol, H(2)O, D(2)O, and DNA. The data are consistent with a model wherein excitation induces metal-to-ligand charge transfer (MLCT) to any of the ligands (termed the 'precursor' state) which, by interligand electron transfer (ILET), produces an excited state localised on the dppz ligand, MLCT(1). In water this state relaxes with a characteristic time of approximately 6 ps to a non-emissive state (MLCT(2)). The TR(3) spectra in water, acetonitrile and DNA are all distinctly different. However, the early (4 ps) water spectrum resembles the spectrum in DNA. This interesting observation suggests that the DNA-bound excited state of the complex can be thought of as a model for the initial, poorly solvated state in water.     

Study on the interactions between CuL(2) and Morin with DNA

Absorption, fluorescence spectral and viscometric studies have been carried out on the interaction of Morin (2',3,4',5,7-pentahydroxyflavone, ) and its Cu complex, CuL(2) x 2H(2)O [L=Morin (2'-OH group deprotonated), ] with calf thymus DNA. CuL(2) shows different spectral characteristics from that of Morin in the presence of DNA. Increasing fluorescence is seen for CuL(2) with DNA addition whereas decreased fluorescence is observed for Morin. Quenching fluorescence is observed for the DNA-EB system when CuL(2) is added whereas slightly quenched fluorescence is seen for the DNA-EB system with Morin addition. The relative viscosity of DNA and the DNA-EB system increases with the addition of CuL(2.) Hypochromism and a smaller shift are observed in the UV-visible spectra of CuL(2) in the presence of DNA and the denatured temperature of DNA is decreased in the presence of CuL(2). The above results suggested that Morin and CuL(2) can both bind to DNA, but the binding mode is different. The complex binds to DNA mainly by intercalation, while Morin binds in a nonintercalating mode.     

Kinetic mechanism of the Mg2+-dependent nucleotidyl transfer catalyzed by T4 DNA and RNA ligases.

The Mg(2+)-dependent adenylylation of the T4 DNA and RNA ligases was studied in the absence of a DNA substrate using transient optical absorbance and fluorescence spectroscopy. The concentrations of Mg(2+), ATP, and pyrophosphate were systematically varied, and the results led to the conclusion that the nucleotidyl transfer proceeds according to a two-metal ion mechanism. According to this mechanism, only the di-magnesium-coordinated form Mg(2)ATP(0) reacts with the enzyme forming the covalent complex E.AMP. The reverse reaction (ATP synthesis) occurs between the mono-magnesium-coordinated pyrophosphate form MgP(2)O(7)(2-) and the enzyme.MgAMP complex. The nucleotide binding rate decreases in the sequence ATP(4-) > MgATP(2-) > Mg(2)ATP(0), indicating that the formation of the non-covalent enzyme.nucleotide complex is driven by electrostatic interactions. T4 DNA ligase shows notably higher rates of ATP binding and of subsequent adenylylation compared with RNA ligase, in part because it decreases the K(d) of Mg(2+) for the enzyme-bound Mg(2)ATP(0) more than 10-fold. To elucidate the role of Mg(2+) in the nucleotidyl transfer catalyzed by T4 DNA and RNA ligases, we propose a transition state configuration, in which the catalytic Mg(2+) ion coordinates to both reacting nucleophiles: the lysyl moiety of the enzyme that forms the phosphoramidate bond and the alpha-beta-bridging oxygen of ATP.     

Role of magnesium ion in the interaction between chromomycin A3 and DNA: binding of chromomycin A3-Mg2+ complexes with DNA.

Chromomycin A3 is an antitumor antibiotic which blocks macromolecular synthesis via reversible interaction with DNA template only in the presence of divalent metal ions such as Mg2+. The role of Mg2+ in this antibiotic-DNA interaction is not well understood. We approached the problem in two steps via studies on the interaction of (i) chromomycin A3 and Mg2+ and (ii) chromomycin A3-Mg2+ complex(es) and DNA. Spectroscopic techniques such as absorption, fluorescence, and CD were employed for this purpose. The results could be summed up in two parts. Absorption, fluorescence, and CD spectra of the antibiotic change upon addition of Mg2+ due to complex formation between them. Analysis of the quantitative dependence of change in absorbance of chromomycin A3 (at 440 nm) upon input concentration of Mg2+ indicates formation of two types of complexes with different stoichiometries and formation constants. Trends in change of fluorescence and CD spectroscopic features of the antibiotic in the presence of Mg2+ at different concentrations further corroborate this result. The two complexes are referred to as complex I (with 1:1 stoichiometry in terms of chromomycin A3:Mg2+) and complex II (with 2:1 stoichiometry in terms of chromomycin A3:Mg2+), respectively, in future discussions. The interactions of these complexes with calf thymus DNA were examined to check whether they bind differently to the same DNA. Evaluation of binding parameters, intrinsic binding constants, and binding stoichiometry, by means of spectrophotometric and fluorescence titrations, shows that they are different. Distinctive spectroscopic features of complexes I and II, when they are bound to DNA, also support that they bind differently to the above DNA. Measurement of thermodynamic parameters characterizing their interactions with calf thymus DNA shows that complex I-DNA interaction is exothermic, in contrast to complex II-DNA interaction, which is endothermic. This feature implies a difference in the molecular nature of the interactions between the complexes and calf thymus DNA. These observations are novel and significant to understand the antitumor property of the antibiotic. They are also discussed to provide explanations for the earlier reports that in some cases appeared to be contradictory.     

Myb-DNA recognition: role of tryptophan residues and structural changes of the minimal DNA binding domain of c-Myb

The Myb oncoprotein specifically binds DNA by a domain composed of three imperfect repeats, R1, R2, and R3, each containing 3 tryptophans. The tryptophan fluorescence of the minimal binding domain, R2R3, of c-Myb was used to monitor structural flexibility changes occurring upon DNA binding to R2R3. The quenching of the Trp fluorescence by DNA titration shows that four out of the six tryptophans are involved in the formation of the specific R2R3-DNA complex and the environment of the tryptophan residues becomes more hydrophobic in the complex. The fluorescence intensity quenching of the tryptophans by binding of R2R3 to DNA is consistent with the decrease of the decay time: 1.46 ns for free R2R3 to 0.71 ns for the complexed protein. In the free R2R3, the six tryptophans are equally accessible to the iodide and acrylamide quenchers with a high collisional rate constant (4 x 10(9) and 3 x 10(9) M-1 s-1, respectively), indicating that R2R3 in solution is very flexible. In the R2R3-DNA complex, no Trp fluorescence quenching is observed with iodide whereas all tryptophan residues remain accessible to acrylamide with a collisional rate constant slightly slower than that in the free state. These results indicate that (i) a protein structural change occurs and (ii) the R2R3 molecule keeps a high mobility in the complex.The complex formation presents a two-step kinetics: a fast step corresponding to the R2R3-DNA association (7 x 10(5) M-1 s-1) and a slower one (0.004 s-1), which should correspond to a structural reorganization of the protein including a reordering of the water molecules at the protein-DNA interface.     

High-sensitivity two-color detection of double-stranded DNA with a confocal fluorescence gel scanner using ethidium homodimer and thiazole orange.

Ethidium homodimer (EthD; lambda Fmax 620 nm) at EthD:DNA ratios up to 1 dye:4-5 bp forms stable fluorescent complexes with double-stranded DNA (dsDNA) which can be detected with high sensitivity using a confocal fluorescence gel scanner (Glazer, A.N., Peck, K. & Mathies, R.A. (1990) Proc. Natl. Acad. Sci. U.S.A. 87, 3851-3855). However, on incubation with unlabeled DNA partial migration of EthD takes place from its complex with dsDNA to the unlabeled DNA. It is shown here that this migration is dependent on the fractional occupancy of intercalating sites in the original dsDNA-EthD complex and that there is no detectable transfer from dsDNA-EthD complexes formed at 50 bp: 1 dye. The monointercalator thiazole orange (TO; lambda Fmax 530 nm) forms readily dissociable complexes with dsDNA with a large fluorescence enhancement on binding (Lee, L.G., Chen, C. & Liu, L.A. (1986) Cytometry 7, 508-517). However, a large molar excess of TO does not displace EthD from its complex with dsDNA. When TO and EthD are bound to the same dsDNA molecule, excitation of TO leads to efficient energy transfer from TO to EthD. This observation shows the practicability of 'sensitizing' EthD fluorescence with a second intercalating dye having a very high absorption coefficient and efficient energy transfer characteristics. Electrophoresis on agarose gels, with TO in the buffer, of preformed linearized M13mp18 DNA-EthD complex together with unlabeled linearized pBR322 permits sensitive fluorescence detection in the same lane of pBR322 DNA-TO complex at 530 nm and of M13mp18 DNA-EthD complex at 620 nm. These observations lay the groundwork for the use of stable DNA-dye intercalation complexes carrying hundreds of chromophores in two-color applications such as the physical mapping of chromosomes.     

Simultaneous DNA binding and bending by EcoRV endonuclease observed by real-time fluorescence

The complete catalytic cycle of EcoRV endonuclease has been observed by combining fluorescence anisotropy with fluorescence resonance energy transfer (FRET) measurements. Binding, bending, and cleavage of substrate oligonucleotides were monitored in real time by rhodamine-x anisotropy and by FRET between rhodamine and fluorescein dyes attached to opposite ends of a 14-mer DNA duplex. For the cognate GATATC site binding and bending are found to be nearly simultaneous, with association and bending rate constants of (1.45-1.6) x 10(8) M(-1) s(-1). On the basis of the measurement of k(off) by a substrate-trapping approach, the equilibrium dissociation constant of the enzyme-DNA complex in the presence of inhibitory calcium ions was calculated as 3.7 x 10(-12) M from the kinetic constants. Further, the entire DNA cleavage reaction can be observed in the presence of catalytic Mg(2+) ions. These measurements reveal that the binding and bending steps occur at equivalent rates in the presence of either Mg(2+) or Ca(2+), while a slow decrease in fluorescence intensity following bending corresponds to k(cat), which is limited by the cleavage and product dissociation steps. Measurement of k(on) and k(off) in the absence of divalent metals shows that the DNA binding affinity is decreased by 5000-fold to 1.4 x 10(-8) M, and no bending could be detected in this case. Together with crystallographic studies, these data suggest a model for the induced-fit conformational change in which the role of divalent metal ions is to stabilize the sharply bent DNA in an orientation suitable for accessing the catalytic transition state.     

DNA binding and nuclease activity of a one-dimensional heterometallic nitrosyl complex

The interaction of a structurally characterized Sr–Fe nitrosyl complex with DNA has been studied by UV–vis and fluorescence spectroscopy, viscometric, and gel electrophoresis techniques. From the absorption titration studies the intrinsic binding constant of the complex with DNA was calculated to be 1.6 × 10⁴ M⁻¹. Fluorimetric studies indicate that the complex compete with EB in binding to DNA. The complex shows nuclease activity on pUC19 supercoiled DNA in presence of H₂O₂.     

Poly(ADP-ribose) polymerase-1 dimerizes at a 5' recessed DNA end in vitro: a fluorescence study

Activation of poly(ADP-ribose) polymerase-1 (PARP-1) is an immediate cellular reaction to DNA strand breakage as induced by alkylating agents, ionizing radiation, or oxidants. The resulting formation of protein-bound poly(ADP-ribose) facilitates survival of proliferating cells under conditions of DNA damage probably via its contribution to DNA base excision repair. In this study, we investigated the association of the amino-terminal DNA binding domain of human PARP-1 (hPARP-1 DBD) with a 5' recessed oligonucleotide mimicking a telomeric DNA end. We used the fluorescence of the Trp residues naturally occurring in the zinc finger domain of hPARP-1 DBD. Fluorescence intensity and fluorescence anisotropy measurements consistently show that the binding stoichiometry is two proteins per DNA molecule. hPARP-1 was found to bind the 5' recessed DNA end with a binding constant of approximately 10(14) M(-2) if a cooperative binding model is assumed. These results indicate that hPARP-1 DBD dimerizes during binding to the DNA target site. A footprint experiment shows that hPARP-1 DBD is asymmetrically positioned at the junction between the double-stranded and the single-stranded telomeric repeat. The largest contribution to the stability of the complex is given by nonionic interactions. Moreover, time-resolved fluorescence measurements are in line with the involvement of one Trp residue in the stacking interaction with DNA bases. Taken together, our data open new perspectives for interpretation of the selective binding of hPARP-1 to the junction between double- and single-stranded DNA.     

Measurement of the absolute temporal coupling between DNA binding and base flipping

The absolute temporal couplings between DNA binding and base flipping were examined for the EcoRI DNA methyltransferase. The binding event (monitored using rhodamine-x fluorescence anisotropy) was monophasic with a second-order on-rate of 1.1 x 10(7) M-1 s-1 相似文献   

Studies on the Toxic Interaction Mechanism between 2‐Naphthylamine and Herring Sperm DNA

The toxic interaction between 2‐naphthylamine (2‐NA) and herring sperm deoxyribonucleic acid (hs‐DNA) has been thoroughly investigated by UV absorption, fluorescence, and circular dichroism (CD) spectroscopic methods. UV absorption result indicates that 2‐NA may intercalate into the stack base pairs of DNA during the toxic interaction of 2‐NA with DNA. A fluorescence quenching study shows that DNA quenches the intrinsic fluorescence of 2‐NA via a static pathway. The studies on effects of ionic strength and anionic quenching rule out electrostatic and groove bindings as the dominant binding modes. Further studies on denatured DNA fluorescence quenching and thermal melting studies confirm that the dominant binding mode of 2‐NA‐DNA is intercalative binding. A CD spectral study shows that the binding interaction of 2‐NA with DNA leads to the disorganization of the neat double‐helical structure of hs‐DNA. © 2013 Wiley Periodicals, Inc. J BiochemMol Toxicol 27:279‐285, 2013; View this article online at wileyonlinelibrary.com . DOI 10.1002/jbt.21488     

Fluorescence energy transfer between the primer and the beta subunit of the DNA polymerase III holoenzyme.

We report here our initial success in using fluorescence energy transfer to map the position of the subunits of the DNA polymerase III holoenzyme within initiation complexes formed on primed DNA. Using primers containing a fluorescent derivative 3 nucleotides from the 3'-terminus and acceptors of fluorescence energy transfer located on Cys333 of the beta subunit, a donor-acceptor distance of 65 A was measured. Coupling this distance with other information enabled us to propose a model for the positioning of beta within initiation complexes. Examination of the fluorescence properties of a labeled primer with the unlabeled beta subunit and other assemblies of DNA polymerase III holoenzyme subunits allowed us to distinguish all of the known intermediates of the holoenzyme-catalyzed reaction. Specific fluorescence changes could be assigned for primer annealing, Escherichia coli single-stranded DNA-binding protein binding, 3'----5' exonucleolytic hydrolysis of the primer, DNA polymerase III* binding, initiation complex formation upon the addition of beta in the presence of ATP, and DNA elongation. These fluorescence changes are sufficiently large to support future detailed kinetic studies. Particularly interesting was the difference in fluorescence changes accompanying initiation complex formation as compared to binding of DNA polymerase III holoenzyme subunit assemblies. Initiation complex formation resulted in a strong fluorescence enhancement. Binding of DNA polymerase III* led to a fluorescence quenching, and transfer of beta to primed DNA by the gamma delta complex did not change the fluorescence. This demonstrates a rearrangement of subunits accompanying initiation complex formation. Monitoring fluorescence changes with labeled beta, we have determined that beta binds with a stoichiometry of one monomer/primer terminus.