Alkyne-azide click chemistry mediated carbanucleosides synthesis

Hitherto unknown 1,4-disubstituted-[1,2,3]-triazolo-4',4'-dihydroxymethyl-3'-deoxy carbanucleosides were synthesized based on a "click approach." Various alkynes were introduced on a key azido intermediate by the "click" 1,3-dipolar Huisgen cycloaddition. Their antiviral activities and cellular toxicities were evaluated on vaccinia virus. None of the synthesized compounds exhibited a significant antiviral activity.     

In situ synthesis of fluorescent membrane lipids (ceramides) using click chemistry

Ceramide analogues containing azide groups either in the polar head or in the hydrocarbon chains are non-fluorescent. When incorporated into phospholipid bilayers, they can react in situ with a non-fluorescent 1,8-naphthalimide using click chemistry giving rise to fluorescent ceramide derivatives emitting at ≈440 nm. When incorporated into giant unilamellar vesicles, two-photon excitation at 760 nm allows visualization of the ceramide-containing bilayers. This kind of method may be of general applicability in the study of model and cell membranes.     

Detection of transglutaminase activity using click chemistry

Transglutaminase 2 (TG2) is a Ca(2+)-dependent enzyme able to catalyze the formation of ε(γ-glutamyl)-lysine crosslinks between polypeptides, resulting in high molecular mass multimers. We have developed a bioorthogonal chemical method for the labeling of TG2 glutamine-donor proteins. As amine-donor substrates we used a set of azide- and alkyne-containing primary alkylamines that allow, after being crosslinked to glutamine-donor proteins, specific labeling of these proteins via the azide-alkyne cycloaddition. We demonstrate that these azide- and alkyne-functionalized TG2 substrates are cell permeable and suitable for specific labeling of TG2 glutamine-donor substrates in HeLa and Movas cells. Both the Cu(I)-catalyzed and strain promoted azide-alkyne cycloaddition proved applicable for subsequent derivatization of the TG2 substrate proteins with the desired probe. This new method for labeling TG2 substrate proteins introduces flexibility in the detection and/or purification of crosslinked proteins, allowing differential labeling of cellular proteins.     

Chemical synthesis of RNA using fast oligonucleotide deprotection chemistry.

The exocyclic amine protecting groups in oligonucleotide synthesis which require 8-16 hours at 55 degrees C for deprotection in ammonia have been replaced with more labile base protecting groups (dimethylformamidine for adenine and guanine and isobutyryl for cytosine). Using these fast oligonucleotide deprotecting groups which require 2-3 hours at 55 degrees C for complete deprotection, a new set of cyanoethyl phosphoramidite ribonucleoside monomers and supports has been developed. Ribozymes and substrate RNAs which were synthesized with these phosphoramidites were assayed and were found to have full catalytic (biological) activity.     

Surface functionalization of virus-like particles by direct conjugation using azide-alkyne click chemistry

We present a cell-free protein synthesis (CFPS) platform and a one-step, direct conjugation scheme for producing virus-like particle (VLP) assemblies that display multiple ligands including proteins, nucleic acids, and other molecules. Using a global methionine replacement approach, we produced bacteriophage MS2 and bacteriophage Qβ VLPs with surface-exposed methionine analogues (azidohomoalanine and homopropargylglycine) containing azide and alkyne side chains. CFPS enabled the production of VLPs with yields of ~ 300 μg/mL and with 85% incorporation of methionine analogues without requiring a methionine auxotrophic production host. We then directly conjugated azide- and alkyne-containing proteins (including an antibody fragment and the granulocyte-macrophage colony stimulating factor, or GM-CSF), nucleic acids and poly(ethylene glycol) chains to the VLP surface using Cu(I) catalyzed click chemistry. The GM-CSF protein, after conjugation to VLPs, was shown to partially retain its ability to stimulate the proliferation of cells. Conjugation of GM-CSF to VLPs resulted in a 3-5-fold reduction in its bioactivity. The direct attachment scheme facilitated conjugation of three different ligands to the VLPs in a single step, and enabled control of the relative ratios and surface abundance of the attached species. This platform can be used for the production of novel VLP bioconjugates for use as drug delivery vehicles, diagnostics, and vaccines.     

Stereoselective synthesis of bio-hybrid amphiphiles of coumarin derivatives by Ugi-Mannich triazole randomization using copper catalyzed alkyne azide click chemistry

An efficient synthesis of ester-triazole-amide amphiphiles of coumarin derivatives by triazole randomization based on click approach is described. Twenty-five small peptide azides were synthesized using Ugi or alternate Mannich-type multi-component reactions. The new azides were then used for the triazole randomization of alkyne functionalized coumarin ester under CuAAC conditions. Sixty-five new peptide bio-hybrids are obtained in near quantitative yield with high regio and stereoselectivity.     

Coronavirus minus-strand RNA synthesis and effect of cycloheximide on coronavirus RNA synthesis.

The temporal sequence of coronavirus plus-strand and minus-strand RNA synthesis was determined in 17CL1 cells infected with the A59 strain of mouse hepatitis virus (MHV). MHV-induced fusion was prevented by keeping the pH of the medium below pH 6.8. This had no effect on the MHV replication cycle, but gave 5- to 10-fold-greater titers of infectious virus and delayed the detachment of cells from the monolayer which permitted viral RNA synthesis to be studied conveniently until at least 10 h postinfection. Seven species of poly(A)-containing viral RNAs were synthesized at early and late times after infection, in nonequal but constant ratios. MHV minus-strand RNA synthesis was first detected at about 3 h after infection and was found exclusively in the viral replicative intermediates and was not detected in 60S single-stranded form in infected cells. Early in the replication cycle, from 45 to 65% of the [3H]uridine pulse-labeled RF core of purified MHV replicative intermediates was in minus-strand RNA. The rate of minus-strand synthesis peaked at 5 to 6 h postinfection and then declined to about 20% of the maximum rate. The addition of cycloheximide before 3 h postinfection prevented viral RNA synthesis, whereas the addition of cycloheximide after viral RNA synthesis had begun resulted in the inhibition of viral RNA synthesis. The synthesis of both genome and subgenomic mRNAs and of viral minus strands required continued protein synthesis, and minus-strand RNA synthesis was three- to fourfold more sensitive to inhibition by cycloheximide than was plus-strand synthesis.     

Perylene diimide-oligonucleotide conjugates constructed by click chemistry

Oligonucleotide conjugates were prepared by copper-catalyzed cycloaddition of acetylene-modified oligonucleotides to diazido derivative of perylene 3,4,9,10-tetracarboxylic acid diimide.     

Preparation of diazenecarboxamide-carboplatin conjugates by click chemistry

An alternative, mild and highly efficient synthetic approach to platinum complexes with bioactive carrier ligands features a platinum-complex-tolerant copper(I)-catalyzed 1,3-dipolar cycloaddition. As demonstrated by the preparation of novel diazenecarboxamide-carboplatin conjugates, this approach is superior to other methodologies.     

Efficient synthesis of a fluorescent tripod detection system for pesticides by microwave-assisted click chemistry

A new tripod molecule containing an aromatic core bearing three peracetylated cyclodextrins was synthesized via a microwave-assisted Huisgen 1,3-dipolar cycloaddition and was studied by fluorescence spectroscopy. The photoluminescent properties of complexation phenomena with different pesticides were evaluated in acetonitrile. Fluorescence titrations have been performed to calculate binding constants, sensitivity factors, and limit of detection of the resulting complexes. 2D NMR experiments confirmed the inclusion of pesticide in the hydrophobic cavity of the macrocycle and validated the supramolecular association responsible for the quenching of the fluorescence.     

Reductive alkylation of hyaluronic acid for the synthesis of biocompatible hydrogels by click chemistry

Hyaluronan (HA) based hydrogels have been synthesized combining chemical modification of the polysaccharide by partial oxidation, reductive amination and 'click chemistry'. HA was oxidized by 4-acetamido-TEMPO-mediated reaction, using sodium hypochlorite as primary oxidant and NaBr in buffered pH, so that the produced aldehyde moieties (hemiacetals) were trapped in situ by adding primary amines containing azide or alkyne-terminal groups. The structure of the reaction products, oxidized-HA and primary amines bonded to HA, was elucidated using 2D NMR spectroscopy. SEC-MALLS analysis of the modified substrates showed a negligible degradation of the polysaccharide using this procedure. Furthermore, azido- and alkynyl derivatives underwent cross-linking by click chemistry into hydrogels, which were characterized by NMR, FT-IR, swelling degree and mechanical properties. Possible application of the material as scaffold for tissue engineering was tested by seeding and proliferation of chondrocytes for up to 15 days.     

Novel hydrogels via click chemistry: synthesis and potential biomedical applications

A novel procedure for the in situ rapid chemical gelation of aqueous solutions of hyaluronan has been employed. In brief, water-soluble polysaccharide derivatives bearing side chains endowed with either azide or alkyne terminal functionality have been prepared. When the latter two types of derivatives are mixed together in aqueous solution they give rise to a 1,3-dipolar cycloaddition reaction resulting in fast gelation (in the presence of catalytic amounts of Cu(I)) at room temperature. Gel formation has been characterized rheologically and could also be followed qualitatively by means of IR spectroscopy. The resulting gels have been studied in terms of swelling properties and, in particular, NMR spectral features. Carrying out the gelation process in aqueous solutions of benzidamine and doxorubicin, respectively, the polysaccharide networks acted as drug reservoirs. The doxorubicin release resulted in well controllable acting upon the gels degree of cross-linking. Finally, formation of the click-gels using aqueous suspensions of Saccharomices cerevisiae yeast cells allowed the obtainment of scaffolds inside which cells were homogeneously distributed and smoothly adhered to the inner pores surfaces, according to SEM analysis. After 24 h about 60% of the entrapped cells exhibited proliferating activity. Click-gels prepared as detailed herein do have a number of positive features that make them, in perspective, materials of choice for drug release and tissue engineering manipulations.     

Methods of using click chemistry in the discovery of enzyme inhibitors

This protocol describes the step-by-step procedures for the efficient assembly of bidentate inhibitor libraries of a target enzyme, using the so-called 'click chemistry' between an alkyne-bearing core group and an azide-modified peripheral group, followed by direct biological screening for the identification of potential 'hits'. The reaction is highlighted by its modularity, high efficiency (approximately 100% yield in most cases) and tolerance toward many functional groups present in the fragments, as well as biocompatibility (typically carried out in aqueous conditions with small amounts of biocompatible catalysts). The approach consists of three steps: (i) chemical synthesis of alkyne-bearing protein tyrosine phosphatase or matrix metalloprotease core groups and diverse azide-modified peripheral groups; (ii) click chemistry to assemble the bidentate inhibitor libraries; and (iii) direct screening of the libraries with target enzymes using 384-well microplate assays. Following the chemical synthesis of the core and peripheral groups and optimization of the click chemistry conditions (approximately 1 week), steps (ii) and (iii) take 3 d to complete (approximately 1-2 d for library assembly and 1 d for inhibitor screening).     

Labeling live cells by copper-catalyzed alkyne--azide click chemistry

The copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction, optimized for biological molecules in aqueous buffers, has been shown to rapidly label mammalian cells in culture with no loss in cell viability. Metabolic uptake and display of the azide derivative of N-acetylmannosamine developed by Bertozzi, followed by CuAAC ligation using sodium ascorbate and the ligand tris(hydroxypropyltriazolyl)methylamine (THPTA), gave rise to abundant covalent attachment of dye-alkyne reactants. THPTA serves both to accelerate the CuAAC reaction and to protect the cells from damage by oxidative agents produced by the Cu-catalyzed reduction of oxygen by ascorbate, which is required to maintain the metal in the active +1 oxidation state. This procedure extends the application of this fastest of azide-based bioorthogonal reactions to the exterior of living cells.     

Sequential and parallel dual labeling of nanoparticles using click chemistry

Bioorthogonal ‘click’ reactions have recently emerged as promising tools for chemistry and biological applications. By using a combination of two different ‘click’ reactions, ‘double-click’ strategies have been developed to attach multiple labels onto biomacromolecules. These strategies require multi-step modifications of the biomacromolecules that can lead to heterogeneity in the final conjugates. Herein, we report the synthesis and characterization of a set of three trifunctional linkers. The linkers having alkyne and cyclooctyne moieties that are capable of participating in sequential copper(I)-catalyzed and copper-free cycloaddition reactions with azides. We have also prepared a linker comprised of an alkyne and a 1,2,4,5-terazine moiety that allows for simultaneous cycloaddition reactions with azides and trans-cyclooctenes, respectively. These linkers can be attached to synthetic or biological macromolecules to create a platform capable of sequential or parallel ‘double-click’ labeling in biological systems. We show this potential using a generation 5 (G5) polyamidoamine (PAMAM) dendrimer in combination with the clickable linkers. The dendrimers were successfully modified with these linkers and we demonstrate both sequential and parallel ‘double-click’ labeling with fluorescent reporters. We anticipate that these linkers will have a variety of application including molecular imaging and monitoring of macromolecule interactions in biological systems.     

Direct and nondestructive verification of PNA immobilization using click chemistry

The fluorogenic 1,3-Huisgen dipolar cycloaddition reaction was used as part of a novel immobilization strategy of PNA capture probes on a microarray. By using this click chemistry, azidocoumarin-anchored PNA probes were immobilized on phenyl acetylene-modified glass slides with the simultaneous generation of the fluorescent triazolylcoumarin moiety. Since the emitting moieties are generated in the immobilization reaction itself, fluorescent signals can be used to directly monitor the integrity of immobilization in a nondestructive manner. By using this strategy, PNA microarrays were prepared and successfully employed to perform microarray-based diagnosis of selected mutations in the breast cancer susceptibility gene BRCA1.     

AutoClickChem: click chemistry in silico

Academic researchers and many in industry often lack the financial resources available to scientists working in "big pharma." High costs include those associated with high-throughput screening and chemical synthesis. In order to address these challenges, many researchers have in part turned to alternate methodologies. Virtual screening, for example, often substitutes for high-throughput screening, and click chemistry ensures that chemical synthesis is fast, cheap, and comparatively easy. Though both in silico screening and click chemistry seek to make drug discovery more feasible, it is not yet routine to couple these two methodologies. We here present a novel computer algorithm, called AutoClickChem, capable of performing many click-chemistry reactions in silico. AutoClickChem can be used to produce large combinatorial libraries of compound models for use in virtual screens. As the compounds of these libraries are constructed according to the reactions of click chemistry, they can be easily synthesized for subsequent testing in biochemical assays. Additionally, in silico modeling of click-chemistry products may prove useful in rational drug design and drug optimization. AutoClickChem is based on the pymolecule toolbox, a framework that may facilitate the development of future python-based programs that require the manipulation of molecular models. Both the pymolecule toolbox and AutoClickChem are released under the GNU General Public License version 3 and are available for download from http://autoclickchem.ucsd.edu.     

A multifunctional bioconjugate module for versatile photoaffinity labeling and click chemistry of RNA

A multifunctional reagent based on a coumarin scaffold was developed for derivatization of naive RNA. The alkylating agent N3BC [7-azido-4-(bromomethyl)coumarin], obtained by Pechmann condensation, is selective for uridine. N3BC and its RNA conjugates are pre-fluorophores which permits controlled modular and stepwise RNA derivatization. The success of RNA alkylation by N3BC can be monitored by photolysis of the azido moiety, which generates a coumarin fluorophore that can be excited with UV light of 320?nm. The azidocoumarin-modified RNA can be flexibly employed in structure-function studies. Versatile applications include direct use in photo-crosslinking studies to cognate proteins, as demonstrated with tRNA and RNA fragments from the MS2 phage and the HIV genome. Alternatively, the azide function can be used for further derivatization by click-chemistry. This allows e.g. the introduction of an additional fluorophore for excitation with visible light.     

The facile synthesis of multifunctional PAMAM dendrimer conjugates through copper-free click chemistry

The facile conjugation of three azido modified functionalities, namely a therapeutic drug (methotrexate), a targeting moiety (folic acid), and an imaging agent (fluorescein) with a G5 PAMAM dendrimer scaffold with cyclooctyne molecules at the surface through copper-free click chemistry is reported. Mono-, di-, and tri-functional PAMAM dendrimer conjugates can be obtained via combinatorial mixing of different azido modified functionalities simultaneously or sequentially with the dendrimer platform. Preliminary flow cytometry results indicate that the folic acid targeted nanoparticles are efficiently binding with KB cells.