Properties of lecithin-dodecaprenol macrovesicular bilayer membranes

The ionic transport properties, capacitance and breakdown voltage of bilayer macrovesicles made from lecithin, dodecaprenol and their mixtures have been studied. The electrical measurements showed that polyprenol in lipid bilayers increases membrane permeability and elasticity, and decreases membrane thickness. Some physiological implications of these findings are indicated.     

Modelling mechanosensitivity in membranes: effects of lateral tension on ionic pores in a microcystin toxin-containing membrane

Lipid bilayers of diphytanoyl lecithin (DPhL) in which a cyanobacterial toxin, microcystin-LR (MC-LR) was incorporated, were found to be a convenient model of natural mechanosensitive membranes. The effects of pressure difference, leading to lateral membrane tension, on artificial membranes formed on the tips of glass micropipettes were investigated using patch-clamp methodology. Emplacement of MC-LR from the bathing solution was enhanced by transmembrane voltage and/or pressure difference. MC-LR pores could be recorded over a wide voltage range, their opening probability being first increased and then reduced at high membrane potential. The pores exhibited several open pore conductance levels, the higher conductance states being more probable at greater lateral tensions. Ion gradient experiments established that the MC-LR pores are cation selective, but discriminate only weakly between K and Na. These results suggest that a lipid liquid crystal matrix containing monomers of multimeric pore-forming molecules could be used as a mechanical sensor and molecular switch. Offprint requests to: P. N. R. Usherwood     

Reversible electrical breakdown of lipid bilayers: formation and evolution of pores

The mechanism of reversible electric breakdown of lipid membranes is studied. The following stages of the process of pore development are substantiated. Hydrophobic pores are formed in the lipid bilayer by spontaneous fluctuations. If these water-filled defects extend to a radius of 0.3 to 0.5 nm, a hydrophilic pore is formed by reorientation of the lipid molecules. This process is favoured by a potential difference across the membrane. The conductivity of the pores depends on membrane voltage, and the type of this dependence changes with the radius of the pore. Hydrophilic pores of an effective radius of 0.6 up to more than 1 nm are formed, which account for the membrane conductivity increase observed. The characteristic times of changes in average radius and number of pores during the voltage pulse and after it are investigated.     

Reversible electrical breakdown of lipid bilayers: formation and evolution of pores

The mechanism of reversible electric breakdown of lipid membranes is studied. The following stages of the process of pore development are substantiated. Hydrophobic pores are formed in the lipid bilayer by spontaneous fluctuations. If these water-filled defects extend to a radius of 0.3 to 0.5 nm, a hydrophilic pore is formed by reorientation of the lipid molecules. This process is favoured by a potential difference across the membrane. The conductivity of the pores depends on membrane voltage, and the type of this dependence changes with the radius of the pore. Hydrophilic pores of an effective radius of 0.6 up to more than 1 nm are formed, which account for the membrane conductivity increase observed. The characteristic times of changes in average radius and number of pores during the voltage pulse and after it are investigated.     

Cell-attached patch clamp study of the electropermeabilization of amphibian cardiac cells.

Potential gradients imposed across cell or lipid membranes break down the insulating properties of these barriers if an intensity and time-dependent threshold is exceeded. Potential gradients of this magnitude may occur throughout the body, and in particular in cardiac tissue, during clinical defibrillation, ablation, and electrocution trauma. To study the dynamics of membrane electropermeabilization a cell-attached patch clamp technique was used to directly control the potential across membrane patches of single ventricular cells enzymatically isolated from frog (Rana pipiens) hearts. Ramp waveshapes were used to reveal rapid membrane conductance changes that may have otherwise been obscured using rectangular waveshapes. We observed a step increase (delta t less than 30 microseconds) or breakdown in membrane conductance at transmembrane potential thresholds of 0.6-1.1 V in response to 0.1-1.0 kV/s voltage ramps. Conductance kinetics on a sub-millisecond time scale indicate that breakdown is preceded by a period of instability during which the noise and amplitude of the membrane conductance begin to increase. In some cells membrane breakdown was observed to be fully reversible when using an intershock interval of 1 min (20-23 degrees C). These findings support energetic models of membrane electropermeabilization which describe the formation of membrane pores (or growth of existing pores) to a conducting state (instability), followed by a rapid expansion of these pores when the energy barrier for the formation of hydrophilic pores is overcome (breakdown).     

The electrical breakdown of cell and lipid membranes: the similarity of phenomenologies

The current responses of human erythrocyte and L-cell membranes being subject to rectangular voltage pulses of 150-700 mV amplitude and 5 X 10(-3)-10 s duration were recorded by means of the patch-clamp method. The behaviour of planar lipid bilayer membranes of oxidized cholesterol and UO2(2+)-modified bilayers of azolectin in a high electric field was investigated for comparison. The gradual growth in the conductance (reversible electrical breakdown) was found for both the cell membranes and lipid bilayers of the compositions studied, with the application of voltage pulses of sufficient duration, to be completed by its drastic enhancement (irreversible breakdown). The time interval preceding the irreversible breakdown and the rate of increase in conductance during the reversible breakdown are determined by the amplitude of the voltage applied. The recovery of the initial properties of the membrane following the reversible breakdown consists of the two stages, the latter substantially differing by their characteristic times. The first very rapid stage (tau much less than 1 ms) reflects the lowering of the conductance of small pores with decreasing voltage across the membrane. The diminishing of the number and mean radii of the pores resulting in their complete disappearance occurs only at the second stage of membrane healing, which lasts several seconds or even minutes. The phenomenological similarity of the cell and lipid membrane breakdown indicates that pores developed during the electrical breakdown of biological membranes arise in their lipid matrices. The structure and the properties of the pores are discussed.     

The effect of hexadecaprenyl diphosphate on phospholipid membranes

In the present study we investigated phospholipid bilayer membranes and phospholipid vesicles made from dioleoylphosphatidylcholine (DOPC) or its mixture with the phosphate ester derivative of long-chain polyprenol (hexadecaprenyl diphosphate, C(80)-PP) by electrophysiological and transmission electron microscopy (TEM) techniques. The membrane conductance-temperature relationships and the membrane breakdown voltage have been measured for different mixtures of C(80)-PP/DOPC. The current-voltage characteristics, the membrane conductance, the activation energy of ion migration across the membrane and the membrane breakdown voltage were determined. Hexadecaprenyl diphosphate decreases the membrane conductance, increases the activation energy and the membrane breakdown voltage for the various values of C(80)-PP/DOPC mole ratio. The analysis of TEM micrographs shows several characteristic structures, which have been described. The data indicate that hexadecaprenyl diphosphate modulates the surface curvature of the membranes by the formation of aggregates in liquid-crystalline phospholipid membranes. The properties of modified membranes can result from the presence of the negative charges in the hydrophilic part of C(80)-PP molecules and can be modulated by the concentration of this compound in membranes. We suggest that the dynamics and conformation of hexadecaprenyl diphosphate in membranes depend on the transmembrane electrical potential.     

Modulation of properties of phospholipid membranes by the long-chain polyprenol (C(160))

The electrical measurements of phospholipid bilayers and the studies of phospholipid vesicles by using the transmission electron microscopy (TEM) showed that dotriacontaprenol (C(160)) isolated from leaves of Spermatophyta influences some properties of membranes. The current-voltage characteristics, the membrane conductance-temperature relationships, the membrane breakdown voltage and the membrane capacitance have been measured for different mixtures of C(160)/DOPC. The membrane conductance, the activation energy of ion migration across the membrane and the membrane thickness were determined. Dotriacontaprenol decreases the membrane breakdown voltage, the activation energy and the membrane capacitance, and increases the membrane conductance and the membrane hydrophobic thickness. The analysis of TEM micrographs shows several characteristic structures, which have been described. The results indicate that dotriacontaprenol increases the membrane elasticity and modulates the surface curvature of the membranes by the formation of fluid microdomains. We suggest that the long polyprenols facilitate the formation of transmembrane, ions-conductive pores.     

Breakdown of lipid bilayer membranes in an electric field

The behaviour of lipid bilayer membranes, made of oxidized cholesterol, and UO₂²⁺-modified azolectin membranes in a high electric field has been investigated using the voltage clamp method. When a voltage pulse is applied to the membrane of these compositions, the mechanical rupture of the membranes is preceded by a gradual conductance increase which remains quite reversible till a certain moment. The voltage drop at this reversible stage of breakdown leads to a very rapid (characteristic time of less than 5 μs) decrease in the membrane conductance. At repeated voltage pulses of the same amplitude with sufficient intervals between them (approx. 10 s), the current oscillograms reflecting the reversible resistance decrease are well reproduced on the same membrane. The time of attainment of the predetermined level of the membrane conductance is strongly dependent on voltage. At different stages of breakdown we have investigated changes in the conductance of UO₂²⁺-modified membrane after the application of two-step voltage pulses, the kinetics of development of the reversible decrease in the membrane resistance in solutions of univalent and divalent ions, and also the influence of sucrose and hemoglobin on the current evolution. The relationship between the reversible conductance increase, the reversible electrical breakdown [15] and the rupture of membrane in an electric field is discussed. We propose the general interpretation of these phenomena, based on the representation of the potential-dependent appearance in the membrane of pores, the development of which is promoted by an electric field.     

Charge-pulse relaxation studies with lipid bilayer membranes modified by alamethicin

Charge-pulse relaxation studies with the alamethicin-lipid membrane system reveal a triphasic decay of membrane voltage. At short times (resolution time 2 microseconds), where a voltage decay due to the orientation of alamethicin dipoles from the interface into the membranes interior ("gating current") could possibly be expected, only a slow decrease with a time constant determined by the bare membrane conductance occurs. After approximately 1 ms (depending on the experimental conditions) the formation of alamethicin pores starts, leading to an increase in the voltage decay rate. When the characteristic voltage Vcpc is approached, pores close and after passing Vcpc the voltage decreases slowly again according to the bare membrane conductance. Vcpc is determined as a function of the initially applied voltage Vo, alamethicin and KCl concentration. Since the membrane voltage decreases continuously, the system does not reach the equilibrium states obtained at constant voltages. Taking the presented experimental results into account the estimate of the electrical potential at the functional membrane of photosynthesis induced by a saturating single turnover flash of deltaphio approximately 105-135 mV (Zickler, Witt and Boheim (1976) FEBS Lett. 66, 142-148) is changed to deltaphio approximately 200 mV.     

Electroporation-induced formation of individual calcium entry sites in the cell body and processes of adherent cells.

Electroporation is a widely used method for introducing macromolecules into cells. We developed an electroporation device that requires only 1 microl of sample to load adherent cells in a 10-mm2 surface area while retaining greater than 90% cell survivability. To better understand this device, field-induced permeabilization of adherent rat basophilic leukemia and neocortical neuroblastoma cells was investigated by using fluorescent calcium and voltage indicators. Rectangular field pulses led to the formation of only a few calcium entry sites, preferentially in the hyperpolarized parts of the cell body and processes. Individual entry sites were formed at the same locations when field pulses were repeated. Before calcium entry, a partial breakdown of the membrane potential was observed in both polar regions. Based on our results, a model is proposed for the formation and closure of macromolecule entry sites in adherent cells. First, the rapid formation of a large number of small pores leads to a partial membrane potential breakdown in both polar regions of the cell. Second, over tens of milliseconds, a few entry sites for macromolecules are formed, preferentially in the hyperpolarized part of cell body and processes, at locations defined by the local membrane structure. These entry sites reseal on a time scale of 50 ms to several seconds, with residual small pores remaining open for several minutes.     

Dielectric breakdown measurements of human and bovine erythrocyte membranes using benzyl alcohol as a probe molecule

Dielectric breakdown of intact erythrocytes and subsequent haemolysis in the presence of increasing concentrations of benzyl alcohol were investigated by means of an electrolytical discharge chamber and a hydrodynamic focusing Coulter Counter.Low concentrations of the drug stabilized human and bovine erythrocytes against haemolysis induced by dielectric breakdown of the cell membrane in isotonic solutions, while high concentrations caused lysis similar to hypotonic and mechanical haemolysis. The stabilizing effect of the drug on electrically induced haemolysis depends on the pulse length of the applied electric field. The critical dielectric breakdown voltage of the membranes of intact cells decreases progressively with increasing benzyl alcohol concentrations, at which the membrane is also more stabilized against electrical and osmotic haemolysis. Occasionally, an increase in the dielectric breakdown voltage is observed at drug concentrations at which lysis occurs. A similar dependence of the breakdown voltage on drug concentration was found for human erythrocyte ghost cells prepared by dielectric breakdown.The results are consistent with the electromechanical model suggested for the dielectric breakdown mechanism and with the assumption of Metcalfe, using NMR and ESR techniques, that the fluidity of the membrane increases with increasing benzyl alcohol concentration.     

Molecular-Level Characterization of Lipid Membrane Electroporation using Linearly Rising Current

We present experimental and theoretical results of electroporation of small patches of planar lipid bilayers by means of linearly rising current. The experiments were conducted on ~120-μm-diameter patches of planar phospholipid bilayers. The steadily increasing voltage across the bilayer imposed by linearly increasing current led to electroporation of the membrane for voltages above a few hundred millivolts. This method shows new molecular mechanisms of electroporation. We recorded small voltage drops preceding the breakdown of the bilayer due to irreversible electroporation. These voltage drops were often followed by a voltage re-rise within a fraction of a second. Modeling the observed phenomenon by equivalent electric circuits showed that these events relate to opening and closing of conducting pores through the bilayer. Molecular dynamics simulations performed under similar conditions indicate that each event is likely to correspond to the opening and closing of a single pore of about 5 nm in diameter, the conductance of which ranges in the 100-nS scale. This combined experimental and theoretical investigation provides a better quantitative characterization of the size, conductance and lifetime of pores created during lipid bilayer electroporation. Such a molecular insight should enable better control and tuning of electroporation parameters for a wide range of biomedical and biotechnological applications.     

Chemically induced lipid phase separation in model membranes containing charged lipids: a spin label study.

The lipid distribution in binary mixed membranes containing charged and uncharged lipids and the effect of Ca2+ and polylysine on the lipid organization was studied by the spin label technique. Dipalmitoyl phosphatidic acid was the charged, and spin labelled dipalmitoyl lecithin was the uncharged (zwitterionic) component. The ESR spectra were analyzed in terms of the spin exchange frequency, Wex. By measuring Wex as a function of the molar percentage of labelled lecithin a distinction between a random and a heterogeneous lipid distribution could be made. It is established that mixed lecithin-phosphatidic acid membranes exhibit lipid segregation (or a miscibility gap) in the fluid state. Comparative experiments with bilayer and monolayer membranes strongly suggest a lateral lipid segregation. At low lecithin concentration, aggregates containing between 25% and 40% lecithin are formed in the fluid phosphatidic acid membrane. This phase separation in membranes containing charged lipids is understandable on the basis of the Gouy-Chapman theory of electric double layers. In dipalmitoyl lecithin and in dimyristoyl phosphatidylethanolamine membranes the labelled lecithin is randomly distributed above the phase transition and has a coefficient of lateral diffusion of D = 2.8-10(-8) cm2/s at 59 degrees C. Addition of Ca2+ dramatically increases the extent of phase separation in lecithin-phosphatidic acid membranes. This chemically (and isothermally) induced phase separation is caused by the formation of crystalline patches of the Ca2+-bound phosphatidic acid. Lecithin is squeezed out from these patches of rigid lipid. The observed dependence of Wex on the Ca2+ concentration could be interpreted quantitatively on the basis of a two-cluster model. At low lecithin and Ca2+ concentration clusters containing about 30 mol % lecithin are formed. At high lecithin or Ca2+ concentrations a second type of precipitation containing 100% lecithin starts to form in addition. A one-to-one binding of divalent ions and phosphatidic acid at pH 9 was assumed. Such a one-to-one binding at pH 9 was established for the case of Mn2+ using ESR spectroscopy. Polylysine leads to the same strong increase in the lecithin segregation as Ca2+. The transition of the phosphatidic acid bound by the polypeptide is shifted from Tt = 47.5 degrees to Tt = 62 degrees C. This finding suggests the possibility of cooperative conformational changes in the lipid matrix and in the surface proteins in biological membranes.     

A thermodynamic approach to alamethicin pore formation

The structure and energetics of alamethicin Rf30 monomer to nonamer in cylindrical pores of 5 to 11 Å radius are investigated using molecular dynamics simulations in an implicit membrane model that includes the free energy cost of acyl chain hydrophobic area exposure. Stable, low energy pores are obtained for certain combinations of radius and oligomeric number. The trimer and the tetramer formed 6 Å pores that appear closed while the larger oligomers formed open pores at their optimal radius. The hexamer in an 8 Å pore and the octamer in an 11 Å pore give the lowest effective energy per monomer. However, all oligomers beyond the pentamer have comparable energies, consistent with the observation of multiple conductance levels. The results are consistent with the widely accepted “barrel-stave” model. The N terminal portion of the molecule exhibits smaller tilt with respect to the membrane normal than the C terminal portion, resulting in a pore shape that is a hybrid between a funnel and an hourglass. Transmembrane voltage has little effect on the structure of the oligomers but enhances or decreases their stability depending on its orientation. Antiparallel bundles are lower in energy than the commonly accepted parallel ones and could be present under certain experimental conditions. Dry aggregates (without an aqueous pore) have lower average effective energy than the corresponding aggregates in a pore, suggesting that alamethicin pores may be excited states that are stabilized in part by voltage and in part by the ion flow itself.     

Formation and properties of aqueous leaks induced in human erythrocytes by electrical breakdown

Leaks were induced in human erythrocytes by brief (tau = 1-40 microseconds) discharges of high electric fields (3-20 kV/cm). Leak permeabilities were characterized by measuring (a) net and tracer fluxes of K+ and nonelectrolytes under protection of the cells against colloid-osmotic lysis, or (b) rates of colloid osmotic lysis in various salt solutions. The induced permeabilities are essentially stable for hours at 0-2 degrees C. Leak permeability P increases exponentially with the breakdown voltage ED according to a function of the general type P = bED. The basis b varies with the pulse length. A log-linear presentation reveals a biphasic linear relationship with a break at which the slope (= log b) decreases markedly. Elevated ionic strengths of the suspension medium during the electric discharge enhance leak formation. Leak permeability exhibits an apparent activation energy of 29 +/- 5 kJ/mol, indicative of diffusion through aqueous pathways. Somewhat differing equivalent pore radii emerge from measurements with different probes: 0.6-0.8 nm from tracer fluxes of polyols (Mr = 3600, ED = 4-7 kV/cm) and 0.8-1.9 nm from osmotic protection studies with polyethylene glycols (Mr = 200-3300, ED = 6-10 kV/cm). These numbers and the non-monoexponential increase of leak permeability with the field strength suggest a dual mechanism for the increase of leak permeability: an increase of the number of pores at low breakdown voltage and an additional increase of pore size at higher voltage. Estimated numbers of pores range from 1 to 10 per cell, which suggests dynamic fluctuating structural defects to be involved. The leaks discriminate small monovalent inorganic ions in the sequence of free solution mobility. Organic anions are discriminated according to size and charge. Common properties of these electrically induced defects and of chemically induced leaks (diamide, periodate, t-butylhydroperoxide) in the erythrocyte membrane suggest close similarities in the molecular organization.     

Patch clamp studies of single intact secretory granules.

The membrane of secretory granules is involved in the molecular events that cause exocytotic fusion. Several of the proteins that have been purified from the membrane of secretory granules form ion channels when they are reconstituted in lipid bilayers and, therefore, have been thought to form part of the molecular structure of the exocytotic fusion pore. We have used the patch clamp technique to study ion conductances in single isolated secretory granules from beige mouse mast cells. We found that the membrane of the intact granule had a conductance of < 50 pS. No abrupt changes in current corresponding to the opening and closing of ion channels were observed, even under conditions where exocytotic fusion occurred. However, mechanical tension or a large voltage pulse caused the breakdown of the granule membrane resulting in the abrupt opening of a pore with an ion conductance of about 1 nS that fluctuated rapidly and could expand to an immeasurably large conductance or close completely. Surprisingly, the behavior of these pores resembled the pattern of conductance changes of exocytotic fusion pores observed in degranulating beige mast cells. This similarity supports the view that the earliest fusion pore is formed upon the breakdown of a bilayer such as that formed during hemifusion.     

Study of the interaction between the organophosphorus insecticide GA-41 and model membranes using NMR-spectroscopy

Interaction between organophosphorous insecticide GA-41 and liposomes formed from lecithin and multilamellar dispersion from lecithin and cardiolipin mixture (molar ratio is 7:3) has been studied by 1H- and 31P-NMR spectroscopy. The results obtained showed that while interacting with model membranes the GA-41 molecules intercalate into the range of hydrocarbon chains of phospholipids. At certain concentration of GA-41 its molecules induce the formation of some defects on bilayer structure, leading to permeability for Pr3+ ions.     

Study of the volt-ampere characteristics of ion channels by transmembrane current harmonics

A method is proposed for measuring the coefficient of non--linearity beta of current--voltage characteristics of the class i (U) approximately U (1 + beta U2) of ionic channels formed by grammicidine A (Gra) and amphotericine B by the 3rd harmonics of the membrane current. For Gra A beta depends on the concentration of electrolyte c increasing lg c from -17 B-2 at 0.03 M to 8 B-2 at 3.4 M KCl turning to 0 at c0 = 0.3 divided by 1 M. The membranes of egg lecithin and glycerylmonooleate (GMO) differ in c0 value. Substitution of K+ ion for Li+, of the membrane solvent (n-heptane for n-hexadecane) and freezing of the GMO membrane do not affect beta.