Energy requirements and environmental impacts associated with the production of short rotation willow (Salix sp.) chip in Ireland

Willow Salix sp. is currently cultivated as a short rotation forestry crop in Ireland as a source of biomass to contribute to renewable energy goals. The aim of this study is to evaluate the energy requirements and environmental impacts associated with willow (Salix sp.) cultivation, harvest, and transport using life cycle assessment (LCA). In this study, only emissions from the production of the willow chip are included, end‐use emissions from combustion are not considered. In this LCA study, three impact categories are considered; acidification potential, eutrophication potential and global warming potential. In addition, the cumulative energy demand and energy ratio of the system are evaluated. The results identify three key processes in the production chain which contribute most to all impact categories considered; maintenance, harvest and transportation of the crop. Sensitivity analysis on the type of fertilizers used, harvesting technologies and transport distances highlights the effects of these management techniques on overall system performance. Replacement of synthetic fertilizer with biosolids results in a reduction in overall energy demand, but raises acidification potential, eutrophication potential and global warming potential. Rod harvesting compares unfavourably in comparison with direct chip harvesting in each of the impact categories considered due to the additional chipping step required. The results show that dedicated truck transport is preferable to tractor‐trailer transport in terms of energy demand and environmental impacts. Finally, willow chip production compares favourably with coal provision in terms of energy ratio and global warming potential, while achieving a higher energy ratio than peat provision but also a higher global warming potential.     

Comparative life cycle studies on poly(3-hydroxybutyrate)-based composites as potential replacement for conventional petrochemical plastics

A cradle-to-grave environmental life cycle assessment (LCA) of a few poly(3-hydroxybutyrate) (PHB) based composites has been performed and was compared to commodity petrochemical polymers. The end products studied are a cathode ray tube (CRT) monitor housing (conventionally produced from high-impact polystyrene, HIPS) and the internal panels of an average car (conventionally produced from glass-fibers-filled polypropylene, PP-GF). The environmental impact is evaluated on the basis of nonrenewable energy use (NREU) and global warming potential over a 100 years time horizon (GWP100). Sugar cane bagasse (SCB) and nanoscaled organophilic montmorillonite (OMMT) are used as PHB fillers. The results obtained show that, despite the unsatisfying mechanical properties of PHB composites, depending on the type of filler and on the product, it is possible to reach lower environmental impacts than by use of conventional petrochemical polymers. These savings are mainly related to the PHB production process, while there are no improvements related to composites preparation. SCB-based composites seem to be environmentally superior to clay-based ones.     

基于生命周期方法的生活垃圾资源化利用系统生态效率分析

我国生活垃圾产量大但处理能力不足,产生多种环境危害,对其资源化利用能够缓解环境压力并回收资源。为探讨生活垃圾资源化利用策略,综合生命周期评价与生命周期成本分析方法,建立生态效率模型。以天津市为例,分析和比较焚烧发电、卫生填埋-填埋气发电、与堆肥+卫生填埋3种典型生活垃圾资源化利用情景的生态效率。结果表明,堆肥+卫生填埋情景具有潜在最优生态效率;全球变暖对总环境影响贡献最大,而投资成本对经济影响贡献最大。考虑天津市生活垃圾管理现状,建议鼓励发展生活垃圾干湿组分分离及厨余垃圾堆肥的资源化利用策略。     

Life cycle assessment of electrical and thermal energy systems for commercial buildings

Background, Aim and Scope The objective of this life cycle assessment (LCA) study is to develop LCA models for energy systems in order to assess the potential environmental impacts that might result from meeting energy demands in buildings. The scope of the study includes LCA models of the average electricity generation mix in the USA, a natural gas combined cycle (NGCC) power plant, a solid oxide fuel cell (SOFC) cogeneration system; a microturbine (MT) cogeneration system; an internal combustion engine (ICE) cogeneration system; and a gas boiler. Methods LCA is used to model energy systems and obtain the life cycle environmental indicators that might result when these systems are used to generate a unit energy output. The intended use of the LCA analysis is to investigate the operational characteristics of these systems while considering their potential environmental impacts to improve building design using a mixed integer linear programming (MILP) optimization model. Results The environmental impact categories chosen to assess the performance of the energy systems are global warming potential (GWP), acidification potential (AP), tropospheric ozone precursor potential (TOPP), and primary energy consumption (PE). These factors are obtained for the average electricity generation mix, the NGCC, the gas boiler, as well as for the cogeneration systems at different part load operation. The contribution of the major emissions to the emission factors is discussed. Discussion The analysis of the life cycle impact categories indicates that the electrical to thermal energy production ratio has a direct influence on the value of the life cycle PE consumption factors. Energy systems with high electrical to thermal ratios (such as the SOFC cogeneration systems and the NGCC power plant) have low PE consumption factors, whereas those with low electrical to thermal ratios (such as the MT cogeneration system) have high PE consumption factors. In the case of GWP, the values of the life cycle GWP obtained from the energy systems do not only depend on the efficiencies of the systems but also on the origins of emissions contributing to GWP. When evaluating the life cycle AP and TOPP, the types of fuel as well as the combustion characteristics of the energy systems are the main factors that influence the values of AP and TOPP. Conclusions An LCA study is performed to eraluate the life cycle emission factors of energy systems that can be used to meet the energy demand of buildings. Cogeneration systems produce utilizable thermal energy when used to meet a certain electrical demand which can make them an attractive alternative to conventional systems. The life cycle GWP, AP, TOPP and PE consumption factors are obtained for utility systems as well as cogeneration systems at different part load operation levels for the production of one kWh of energy output. Recommendations and Perspectives Although the emission factors vary for the different energy systems, they are not the only factors that influence the selection of the optimal system for building operations. The total efficiencies of the system play a significant part in the selection of the desirable technology. Other factors, such as the demand characteristics of a particular building, influence the selection of energy systems. The emission factors obtained from this LCA study are used as coefficients of decision variables in the formulation of an MILP to optimize the selection of energy systems based on environmental criteria by taking into consideration the system efficiencies, emission characteristics, part load operation, and building energy demands. Therefore, the emission factors should not be regarded as the only criteria for choosing the technology that could result in lower environmental impacts, but rather one of several factors that determine the selection of the optimum energy system. ESS-Submission Editor: Arpad Horvath (horvath@ce.berkeley.edu)     

A cradle-to-gate life cycle assessment of wood fibre-reinforced polylactic acid (PLA) and polylactic acid/thermoplastic starch (PLA/TPS) biocomposites

Purpose

Biopolymers are considered to be environmentally friendlier than petroleum-based polymers, but little is known about their environmental performance against petroleum-based products. This paper presents the results of a life cycle assessment (LCA) of two prototype biocomposite formulations produced by extrusion of wood fibre with either polylactic acid (PLA) or a blend of PLA and locally produced thermoplastic starch (TPS).

Methods

The study followed the LCA methodology outlined in the two standards set out by the International Organization for Standardization (ISO): ISO 14040 and ISO 14044 of 2006. A life cycle inventory (LCI) for the biocomposite formulations was developed, and a contribution analysis was performed to identify the significant inputs. Environmental performances of the two formulations were then compared with each other and polypropylene (PP), a petroleum-based polymer. The US Environmental Protection Agency’s impact assessment method, “TRACI: The Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts”, was combined with Cumulative Energy Demand (a European method) in order to characterize the inventory flows. Environmental impact categories chosen for the analysis were the following: global warming, stratospheric ozone depletion, acidification of land and water, eutrophication, smog, human health (respiratory, carcinogenic, and non-carcinogenic) effects and ecotoxicity.

Results and discussion

We found that PLA is the significant input which contributes mostly to fossil fuel consumption, acidification and respiratory and smog effects. Impacts from PLA transport from the faraway source significantly added more burden to its contributions. TPS causes less environmental burden compared to PLA; the environmental performance of the biocomposite improved when a blend of PLA and TPS is used in formulating the biocomposite. The two formulations performed better than PP in all the environmental impact categories except eutrophication effects, which is important on a regional basis.

Conclusions

The following conclusions were drawn from this study:

• PLA is the environmentally significant input among the three raw materials.
• TPS causes less environmental burden than PLA. Environmental performance of the biocomposite improves in the life cycle energy consumption, fossil energy use, ozone depletion and non-carcinogenic impact categories when a blend of PLA and TPS is used.
• The biocomposite can outperform PP in all the impact categories except eutrophication effects if manufactured using hydroelectricity.

The biopolymer could be a potential alternative to PP as it could cause less of a burden to the environment on a cradle-to-gate basis. Environmental impacts at the complete life cycle levels should be looked into in order to fully understand its potential.     

Comparative Life Cycle Assessment of Charcoal,Biogas, and Liquefied Petroleum Gas as Cooking Fuels in Ghana

Standard life cycle assessment (LCA) methodology has been used to determine and compare the environmental impacts of three different cooking fuels used in Ghana, namely, charcoal, biogas, and liquefied petroleum gas (LPG). A national policy on the use of cooking fuels would have to look at the environmental, social, and cost implications associated with the fuel types. This study looked at the environmental aspect of using these fuels. The results showed that global warming and human toxicity were the most significant overall environmental impacts associated with them, and charcoal and LPG, respectively, made the largest contribution to these impact categories. LPG, however, gave relatively higher impacts in three other categories of lesser significance—that is, eutrophication, freshwater aquatic ecotoxicity, and terrestrial ecotoxicity potentials. Direct comparison of the results showed that biogas had the lowest impact in five out of the seven categories investigated. Charcoal and LPG had only one lowest score each. From the global warming point of view, however, LPG had a slight overall advantage over the others, and it was also the most favorable at the cooking stage, in terms of its effect on humans.     

Life cycle assessment of a biobased chainsaw oil made on the farm in Wallonia

Purpose

The environmental issue is a particular concern for chainsaw oils because these fluids represent a total loss system. The aim of this study is to quantify the environmental impacts of a biobased chainsaw oil made on the farm in Wallonia (a region of Belgium) and to compare it with a model mineral chainsaw oil. With this study, the aim is also to participate in the development of the life cycle assessment (LCA) methodology applied to the biolubricant sector since LCAs on these products are quite limited and rarely sufficiently detailed.

Method

In this LCA, the attributional approach is applied. Seven impact categories are studied. The methods for life cycle impact assessment are IPCC, ReCiPe, CML and USEtox. The functional unit is 1 kg of base oil. Seven sensitivity analyses are performed.

Results and discussion

Results indicate that the biobased chainsaw oil made on the farm has a lower impact for the global warming potential, the abiotic depletion potential, the ozone depletion potential and the photochemical oxidation potential. On the contrary, it has larger acidification, aquatic eutrophication and aquatic ecotoxicity potential impacts. Regarding the contribution of the life cycle stages of the biobased chainsaw oil, the agricultural stage causes the highest contribution in all impact categories. For the mineral chainsaw oil, the refining stage is preponderant for all impact categories except for the global warming potential for which the end-of-life stage contributes the most. When taking additives into account, conclusions regarding the comparison between the oils are not reversed. Even if it was necessary to consume more biobased than mineral chainsaw oil, conclusions regarding the comparison of the oils would not be reversed. In the same way, a different allocation procedure for rapeseed oil and rape meal, a different rape seeds yield or different extraction yields in the refining stage of the mineral base oil do not change the results of the comparison. For the biobased chainsaw oil, the substitution of only one active substance in the agricultural stage could result in an important decrease of the freshwater ecotoxicity impact.

Conclusions

The biobased chainsaw oil has a lower impact in four out of the seven impact categories and a higher impact in three impact categories. By providing a detailed LCA on a biobased chainsaw oil, this study contributes to the development of LCA applied to biobased lubricants.     

Review of impact categories and environmental indicators for life cycle assessment of geotechnical systems

Life cycle assessment (LCA) has only had limited application in the geotechnical engineering discipline, though it has been widely applied to civil engineering systems such as pavements and roadways. A review of previous geotechnical LCAs showed that most studies have tracked a small set of impact categories, such as energy and global warming potential. Accordingly, currently reported environmental indicators may not effectively or fully capture important environmental impacts and tradeoffs associated with geotechnical systems, including those associated with land and soil resources. This research reviewed previous studies, methods, and models for assessment of land use and soil‐related impacts to understand their applicability to geotechnical LCA. The results of this review show that critical gaps remain in current knowledge and practice. In particular, further development or refinement of environmental indicators, impact categories, and cause–effect pathways is needed as they pertain to geotechnical applications—specifically those related to soil quality, soil functions, and the ecosystem services soils provide. In addition, many existing methods emerge from research on land use and land use change related to other disciplines (e.g., agriculture). For applicability to geotechnical projects, the resolution of many of these methods and resulting indicators need to be downscaled from the landscape/macro scale to the project scale. In the near term, practitioners of geotechnical LCA should begin tracking changes to soil properties and report impacts to land and soil resources qualitatively.     

Environmental and human health impacts of growing genetically modified herbicide-tolerant sugar beet: a life-cycle assessment

There is ongoing debate concerning the possible environmental and human health impacts of growing genetically modified (GM) crops. Here, we report the results of a life-cycle assessment (LCA) comparing the environmental and human health impacts of conventional sugar beet growing regimes in the UK and Germany with those that might be expected if GM herbicide-tolerant (to glyphosate) sugar beet is commercialized. The results presented for a number of environmental and human health impact categories suggest that growing the GM herbicide-tolerant crop would be less harmful to the environment and human health than growing the conventional crop, largely due to lower emissions from herbicide manufacture, transport and field operations. Emissions contributing to negative environmental impacts, such as global warming, ozone depletion, ecotoxicity of water and acidification and nutrification of soil and water, were much lower for the herbicide-tolerant crop than for the conventional crop. Emissions contributing to summer smog, toxic particulate matter and carcinogenicity, which have negative human health impacts, were also substantially lower for the herbicide-tolerant crop. The environmental and human health impacts of growing GM crops need to be assessed on a case-by-case basis using a holistic approach. LCA is a valuable technique for helping to undertake such assessments.     

Life Cycle Assessment of Biomass‐based Combined Heat and Power Plants

Norway, like many countries, has realized the need to extensively plan its renewable energy future sooner rather than later. Combined heat and power (CHP) through gasification of forest residues is one technology that is expected to aid Norway in achieving a desired doubling of bioenergy production by 2020. To assess the environmental impacts to determine the most suitable CHP size, we performed a unit process‐based attributional life cycle assessment (LCA), in which we compared three scales of CHP over ten environmental impact categories—micro (0.1 megawatts electricity [MWe]), small (1 MWe), and medium (50 MWe) scale. The functional units used were 1 megajoule (MJ) of electricity and 1 MJ of district heating delivered to the end user (two functional units), and therefore, the environmental impacts from distribution of electricity and hot water to the consumer were also considered. This study focuses on a regional perspective situated in middle‐Norway's Nord‐ and Sør‐Trøndelag counties. Overall, the unit‐based environmental impacts between the scales of CHP were quite mixed and within the same magnitude. The results indicated that energy distribution from CHP plant to end user creates from less than 1% to nearly 90% of the total system impacts, depending on impact category and energy product. Also, an optimal small‐scale CHP plant may be the best environmental option. The CHP systems had a global warming potential ranging from 2.4 to 2.8 grams of carbon dioxide equivalent per megajoule of thermal (g CO₂‐eq/MJ_th) district heating and from 8.8 to 10.5 grams carbon dioxide equivalent per megajoule of electricity (g CO₂‐eq/MJ_el) to the end user.     

Life‐cycle assessment of local feedstock supply scenarios to compare candidate biomass sources

The use of life cycle assessment (LCA) as a comprehensive tool to assess environmental impacts of bioenergies is recommended. Nevertheless, several methodological points remain under debate, particularly regarding the feedstock production step, which is a key stage of bioenergy chains. The present work focuses on field emissions during feedstock production, improving assessment methods by the use of process‐based models. To do so, a real bioenergy chain, the local feedstock supply for a boiler located in northern France, was studied. The LCA compares flax shives, (the reference) with four other biomass sources: Miscanthus, cereal straw, linseed straw, and triticale as a whole plant. Six feedstock supply scenarios were also compared. The study aimed to test a new LCA methodology for agricultural chains by integrating local characteristics (such as climate, soil, and crop management data) and using models to estimate field dynamics of pesticide emissions and soil organic carbon (SOC). Results showed that flax shives and linseed straw had the lowest impacts, except for global warming: as a consequence, supply scenarios with the largest share of flax shives had the lowest impacts. For all selected impact categories, transportation and fertilization were the main contributors. SOC dynamics led to high C sequestration level (e.g. with Miscanthus) or to high CO ₂ emissions level (e.g. with flax shives), thus significantly influencing the global warming impact. Sensitivity analysis showed a large influence of allocation method (economic or mass‐based). This study demonstrated the relevance of integrating simulation models using local data in agricultural LCAs, especially for dynamics of SOC and pesticide from fields. Moreover, this work brought scientific elements to support the choice of flax shives as the main biomass feedstock, and the ranking of the other sources as alternative biomass supplies for the boiler.     

Life Cycle Energy and Climate Change Implications of Nanotechnologies

The potential environmental and health impacts of nanotechnologies triggered a recent surge of life cycle assessment (LCA) studies on nanotechnologies. Focusing on the energy use and greenhouse gas emissions impacts, we reviewed 22 LCA‐based studies on nanomaterials, coatings, photovoltaic devices, and fabrication technologies that were published until 2011. The reviewed LCA studies indicate that nanomaterials have higher cradle‐to‐gate energy demand per functional unit, and thus higher global warming impact, than their conventional counterparts. Depending on the synthesis method, carbon‐based nanoparticles (i.e., carbon nanofibers, carbon nanotubes, and fullerenes) require 1 to 900 gigajoules per kilogram (GJ/kg) of primary energy to produce, compared with ～200 megajoules per kilogram (MJ/kg) for aluminum. This is mainly attributed to the fact that nanomaterials involve an energy‐intensive synthesis process or an additional mechanical process to reduce particle size. Most reviewed studies ascertain, however, that the cradle‐to‐grave energy demand and global warming impact from nanotechnologies at a device level are lower than from conventional technologies because nanomaterials are typically used in a small amount to improve functionality and the upgraded functionality offers more energy‐efficient operation of the device. Because of the immature status of most nanotechnologies, the studies reviewed here often rely on inventory data estimated from literature values and parametric analyses based on laboratory or prototype production, warranting future analyses to confirm the current findings.     

Cradle to gate: life cycle impact of primary aluminium production

Purpose

The International Aluminium Institute’s (IAI) aim was to publish life cycle inventory (LCI) data for use by life cycle assessment (LCA) practitioners through professional databases. The need to provide robust data stems from the increasing application of LCA as a tool for making material and design choices and the importance for representative, up-to-date information to underpin such studies. In addition to this, the institute aimed to evaluate the significance of potential environmental impacts, based on the LCI results, against a defined set of impact categories which can be tracked over time.

Methods

Key environmental data collected as part of the IAI’s long-running industry surveys provided the foundation for the life cycle inventory. In order to evaluate the environmental impact, direct input and output data for primary aluminium production were supplemented with background data for indirect processes available in GaBi version 6 (PE International, 2013b). A cradle-to-gate model was constructed with two distinct datasets, global (GLO) and global minus China (rest of world (RoW)). A partial life cycle impact assessment (LCIA) was completed using the models, and the following six CML (2001–Nov 2010) midpoint environmental impact categories were reported: acidification potential, depletion of fossil energy resources, eutrophication potential, global warming potential, ozone depletion potential and photo-oxidant creation potential. Water scarcity footprint of primary aluminium (Buxmann et al. in this issue) was also included.

Results and discussion

The results indicated that the largest greenhouse gas contributions were attributed to the alumina refining and electrolysis unit processes in both datasets, with electricity and thermal energy, being the major contributing factors to these higher values. The energy intensive nature of primary aluminium production means energy supply can significantly influence the overall environmental impact. Electricity production was found to contribute between 25 % and 80 % to all impact category indicator results, with higher values in the global dataset, a result of the inclusion of Chinese energy data and the increased share of coal-based electricity consumption that it represents.

Conclusions

The global aluminium industry remains dedicated to transparent reporting of its environmental impacts and ensuring that up-to-date, representative LCI data is available. Development of suitable methodologies for new indicators will be required to ensure that the industry continues to report accurately all its relevant impacts. Additionally, with the increased importance of Chinese aluminium production, inclusion of foreground data from Chinese production would further enhance the dataset from which the global impacts of aluminium production are assessed from cradle to gate.

     

Environmental evaluation and comparison of selected industrial scale biomethane production facilities across Europe

Purpose

The two main reasons for producing biomethane as renewable fuel are reduction of climate impacts and depletion of fossil resources. Biomethane is expected to be sustainable, but how sustainable is it actually? This article contributes to the clarification. Therefore, the environmental impacts of several biomethane facilities all over Europe were assessed. A special focus is put on the differences between the facilities as they follow different production routes.

Methods

The method used for evaluation is life cycle assessment (LCA) applied in a well-to-wheel approach. This enables to show the overall performance in terms of global warming potential (GWP), acidification potential (AP), eutrophication potential (EP), photochemical ozone creation potential (POCP) and PE fossil. The system boundary includes the entire chain from biogas production to upgrading, distribution and use. For evaluating the different production routes several years of measuring data, calculating and improving the LCA models in close cooperation with the plant operators were carried out.

Results and discussion

The evaluation of the production routes shows a high reduction potential compared to fossil fuels. Regarding the depletion of fossil resources, the amounts vary between the sites, but the reduction is at least 50 % and reaches almost 100 % reductions at some sites. The reduction of GWP is at least 65 %, because waste flows free of environmental burdens are used almost exclusively as substrate. Other dominant factors are power and heat demand, methane losses to the environment and the use of by-products, e.g. fertilizer.

Conclusions

Despite this caveat, the evaluated systems demonstrate the possible positive results of renewable fuel production if done properly.     

Utilization of woody biomass in Singapore: technological options for carbonization and economic comparison with incineration

Background, aim and scope  The interest in the use of biomass as a renewable energy resource has rapidly grown over the past few years. In Singapore, biomass resources are mostly from waste wood. This article presents a few technological options, namely carbonization, for the conversion of woody biomass into a solid fuel, charcoal. Materials and methods  In the first stage, a life cycle assessment (LCA) ‘gate-to-gate’ system was developed for a conventional carbonizer system, a modern carbonizer from Japan, and a proposed four-stage partial furnace carbonizer from Tunisia. The potential environmental impacts were generated for global warming potential, acidification, human toxicity and photochemical oxidant potential. Based on the first set of results, the second LCA investigation was carried out comparing the selected carbonizer from Japan and an existing incinerator in Singapore. The second LCA adopted a unique approach combining social costs of pollution with the economic factors of the two biomass conversion technologies. Results  The carbonizer from Japan resulted in approximately 85% less greenhouse gases than the conventional carbonization system and 54% less than the proposed four-stage carbonizer from Tunisia. In terms of acidification and human toxicity, the carbonizers from Japan and Tunisia display nearly similar results—both were considerably lower than the conventional carbonizer. For photochemical oxidant potential, very minimal emissions are generated from the four-stage carbonizer and nearly zero impact is realized for the carbonization technology from Japan. Discussion  From the first set of LCA results, the Japanese carbonizer is favored in terms of its environmental results. The highest environmental impacts from the conventional carbonizer were due to large and uncontrolled emissions of acidic gases, greenhouse gases (particularly CO₂ and CH₄), particulates, and non-methane volatile organic compounds from both fugitive sources and energy requirements. The second LCA addressed the performance of the carbonizer from Japan against an existing incinerator in terms of environmental as well as cost performances. This unique approach translated pollution emissions into monetary costs to highlight the impacts of social health. Conclusions  For the first LCA, the accumulated impacts from the Japanese carbonizer proved to display significantly lower environmental impacts, especially for global warming potential. The overall environmental performance of the four-stage carbonizer from Tunisia ranked slightly lower than the one from Japan and much higher than the conventional carbonizer. The second LCA results displayed a noteworthy improvement of 90% for human health from the modern Japanese carbonizer technology—when compared against conventional incinerators. Without considering health issues or social costs, the total value per ton of wood treated is nearly similar for both incinerator and carbonizer. Recommendations and perspectives  The interest in biomass as raw material for producing energy has emerged rapidly in many countries. However, careful analysis and comparison of technologies are necessary to ensure favorable environmental outcomes. A full life cycle study, along with costs and the impact of pollution on society, should be performed before any large-scale biomass conversion technology is implemented. LCA can be applied to quantify and verify the overall environmental performance of a particular technology of interest as well as further explore the proposed technology in terms of costs and social implications.     

Extended Life Cycle Assessment of Southern Pink Shrimp Products Originating in Senegalese Artisanal and Industrial Fisheries for Export to Europe

Southern pink shrimp (Penaeus notialis) are an important Senegalese export commodity. Artisanal fisheries in rivers produce 60%. Forty percent are landed in trawl fisheries at sea. The shrimp from both fisheries result in a frozen, consumer‐packed product that is exported to Europe. We applied attributional life cycle assessment (LCA) to compare the environmental impact of the two supply chains and identify improvement options. In addition to standard LCA impact categories, biological impacts of each fishery were quantified with regard to landed by‐catch, discard, seafloor impact, and size of target catch. Results for typical LCA categories include that artisanal fisheries have much lower inputs and emissions in the fishing phase than does the industrial fishery. For the product from artisanal fisheries, the main part of the impact in the standard LCA categories occurs during processing on land, mainly due to the use of heavy fuel oil and refrigerants with high global warming and ozone depletion potentials. From a biological point of view, each fishery has advantages and drawbacks, and a number of improvement options were identified. If developing countries can ensure biological sustainability of their fisheries and design the chain on land in a resource‐efficient way, long distance to markets is not an obstacle to sustainable trading of seafood products originating in artisanal fisheries.     

Rare Earths from Mines to Metals: Comparing Environmental Impacts from China's Main Production Pathways

Over the past decade, China has supplied over 90% of global rare earths, and in doing so bore significant environmental burdens from processing its complex ores. In this study, we used life cycle assessment to quantify environmental impacts for producing 1 kilogram (kg) of 15 rare earth elements from each major production pathway. The scope of assessment included the largest rare earth oxide (REO) production chain in Bayan Obo, as well as lesser known production chains for bastnäsite in Sichuan and in‐situ leaching of kaolin clays in the Seven Southern Provinces of China. This was followed by assessing impacts from the three major metal refining processes: molten salt electrolysis, calciothermic reduction, and lanthanothermic reduction. Among 11 impact categories assessed, results were highest for human toxicity that ranged between 13.1 and 50.4 kg 1,4‐dichlorobenzene‐eq (equivalent)/kg of rare earth metal^?1, followed by eutrophication (0.04 to 1.26 kg phosphate‐eq/kg of rare earth metal^?1), abiotic depletion potential of fossil fuels (592 to 1,857 megajoules per kg of rare earth metal^?1), acidification (0.25 to 0.87 kg sulfur dioxide‐eq/kg of rare earth metal^?1), and global warming (39.1 to 109.6 kg carbon dioxide‐eq/kg of rare earth metal^?1) potentials. Regionally, impacts in Sichuan were lower across all key impact categories than in Bayan Obo: 32% lower for human toxicity, 67% lower for eutrophication, 58% lower for acidification, and 45% lower for global warming. A scenario analysis between the industry average and best available technologies revealed considerable potential to mitigate impacts across all production chains, particularly by improving waste treatment practices.     

LCA application to Russian Conditions

The environmental impact assessment existing in the Russian Federation at the present moment cannot provide potential scenarios of consequences for the environment from examined processes, since its goal is to calculate the money equivalent of emissions to the environment. Also, it cannot help the environmental specialist to choose the most environmentally sustainable scenario or process, proceeding from the whole life cycle of the object, because it is usually performed only for the use phase of an object. This study also aims to show possibilities for applying LCA methodology, as accepted in the ISO standards series 14040, and as applied to Russian conditions. The main purpose was to investigate a possibility of using the existing environmental impact assessment as the inventory stage in the LCA. As the minor goal, normalisation and weighting factor data for the Russian Federation were calculated on the basis of energy consumption extrapolation. In this paper, the environmental impacts are associated with a sewage wastewater facility. The inventory analysis is performed with data obtained from the MosvodokanalNIIproject (Moscow Research Institute for sewage wastewater treatment facilities) and supplemented with the SimaPro 5.0 database (the Netherlands). The environmental impact categories included and discussed in this study are eutrophication, global warming, landfill, acidification, ozone layer depletion and photochemical ozone creation. This study was performed for several design alternatives or scenarios of the wastewater facility. According to the LCA performed in this study, the most environmentally sustainable scenario is that which has the most effective and complicated treatment of sewage water and sludge.     

Environmental costs of buildings: monetary valuation of ecological indicators for the building industry

The International Journal of Life Cycle Assessment - Building life cycle assessment (LCA) draws on a number of indicators, including primary energy (PE) demand and global warming potential (GWP). A...