Selective recognition of neodymium (III) using ion imprinted polymer particles

Neodymium (III) ion-imprinted polymer (IIP) materials were prepared by the copolymerization of neodymium (III)-5,7-dichloroquinoline-8-ol-4-vinylpyridine ternary complex with styrene(monomer), divinyl benzene (crosslinking monomer) in the presence of 2,2'-azobisisobutyronitrile (initiator). The synthesis was carried out in 2-methoxy ethanol medium (porogen) and the resultant material was filtered, washed, dried and powdered to form unleached IIP particles. The imprint ion was removed by stirring the above particles with 50% (v/v) HCl for 6 h to obtain leached IIP particles with cavities in the polymer particles. Control polymer (CP) particles were similarly prepared without imprint ion, i.e. neodymium (III). CP, unleached and leached IIP particles were characterized by TLC, IR, microanalysis, XRD and UV-visible spectrophotometric studies. The preconcentration of 5-150 microg of neodymium (III) ions present in 500 ml of solution was possible with as little as 40 mg of neodymium (III) IIP particles in the pH range 7.5-8.0 with a detection limit of 50 ng/l. Five replicate determinations of 25 microg of neodymium (III) present in 500 ml of solution gave a mean absorbance of 0.120 with a relative standard deviation of 2.65%. The imprinting effect of IIP particles was noticed in all preconcentration and selectivity studies when compared with CP particles. Furthermore, the selectivity coefficients of neodymium (III) IIP particles were much higher compared with the reported separation factors for the best liquid-liquid extractants, viz. di-2-ethylhexyl phosphoric acid and 2-ethylhexyl-ethylhexyl phosphonate. Kinetic and isotherm studies during rebinding of neodymium (III) onto IIP particles were also carried out.     

Cyclic voltammetry characterization of metal complex imprinted polymer

Polymer capable of specific binding to Cu(2+)-2, 2'-dipyridyl complex was prepared by molecular imprinting technology. The binding specificity of the polymer to the template (Cu(2+)-2, 2'-dipyridyl complex) was investigated by cyclic voltammetric scanning using the carbon paste electrode modified by polymer particles in phosphate buffer solution. Factors that influence rebinding of the imprinted polymer were explored. The results demonstrated that cyclic voltammetry was an efficient approach to explore interactions between template and imprinted polymers.     

A selective molecularly imprinted polymer for immobilization of acetylcholinesterase (AChE): an active enzyme targeted and efficient method

In the present study, we immobilized acetylcholinesterase (AChE) enzyme onto acetylcholine removed imprinted polymer and acetylcholine containing polymer. First, the polymers were produced with acetylcholine, substrate of AChE, by dispersion polymerization. Then, the enzyme was immobilized onto the polymers by using two different methods: In the first method (method A), acetylcholine was removed from the polymer, and then AChE was immobilized onto this polymer (acetylcholine removed imprinted polymer). In the second method (method B), AChE was immobilized onto acetylcholine containing polymer by affinity. In method A, enzyme‐specific species (binding sites) occurred by removing acetylcholine from the polymer. The immobilized AChE reached 240% relative specific activity comparison with free AChE because the active enzyme molecules bounded onto the polymer. Transmission electron microscopy results were taken before and after immobilization of AChE for the assessment of morphological structure of polymer. Also, the experiments, which include optimum temperature (25–65°C), optimum pH (3–10), thermal stability (4–70°C), kinetic parameters, operational stability and reusability, were performed to determine the characteristic of the immobilized AChE. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation and evaluation of a molecularly imprinted polymer for the selective recognition of testosterone--application to molecularly imprinted sorbent assays

Biomimetic testosterone receptors were synthesized via molecular imprinting for use as antibody mimics in immunoassays. As evaluated by radioligand binding assays, imprinted polymers prepared in acetonitrile were very specific for testosterone because the nonimprinted control polymers bound virtually no radiolabeled testosterone. The polymers present an appreciable affinity, with association constants of K(a) = 3.3 x 10(7) M(- 1) (high-affinity binding sites). The binding characteristics of the polymers were also evaluated in aqueous environment to study their viabilities as alternatives to antibodies in molecularly imprinted sorbent assays. Compared with the testosterone-specific antibodies present in commercial kits, our molecularly imprinted polymers are somewhat less sensitive but show a high selectivity.     

Supported imprinted nanospheres for the selective recognition of cholesterol

The preparation of innovative polymeric systems using molecular imprinting technology for application in extracorporeal blood purification is described. Membranes based on a methylmethacrylate-co-acrylic acid copolymer, produced through the phase inversion method, were modified introducing into their structure specific binding sites for cholesterol molecule by adding molecularly imprinted nanoparticles in the membrane matrix. Membranes prepared are intended to selectively remove cholesterol from the blood by using interactions at a molecular level, between the membrane/nanoparticles devices and the template, created during the preparation of polymers. Three polymeric systems in form of nanoparticles were prepared differing in the polymerisation solvent (a mixture of acetonitrile and ethanol (1:1) or pure ethanol), and the molar ratio between the functional monomer and the cross-linker (2.3:1 and 1:1). Two out of three of the prepared polymers showed a very good template rebinding capacity both in phosphate buffer solution (pH 6.9) and in ethanol. In particular the nanoparticles rebound 115.4 mg cholesterol/g polymer in buffer solution, and 57 mg cholesterol/g polymer in ethanol.

The deposition of the nanoparticles on the surface of the phase inversion membranes produced devices with interesting rebinding performances towards cholesterol in buffer solution: a specific recognition of 14.09 mg cholesterol/g system (membrane and nanoparticles) was detected, indicating maintained binding capacity of supported particles as well.     

Preparation of bovine hemoglobin surface molecularly imprinted cotton for selective protein recognition

We have developed a bovine hemoglobin (BHb) surface molecularly imprinted cotton based on degreasing cotton via surface imprinting technique for the efficient selective adsorption of BHb. The morphological structure of the samples was characterized by Scanning Electron Microscopy (SEM), and the chemical modification steps were characterized by Fourier Transform Infrared Spectroscopy (FTIR). The maximum adsorption capacity of the molecularly imprinted cotton (MIC) and non-imprinted cotton (NIC) for BHb was 62.95 mg/g and 8.32 mg/g, respectively, at the optimum pH value of 6.2. The kinetics studies demonstrated that the adsorption follows a pseudo-first-order kinetic model. The adsorption isotherm analysis indicated that the Langmuir adsorption isotherm fits well with the adsorption equilibrium data. Also, the selective adsorption shows the MIC has a good selectivity for BHb. In addition, the assessment of the reusability of the MIC was tested for five successive cycles revealed no significant decrease of the adsorption capacity. Electrophoretic analysis suggests the MIC were successfully applied to capture template proteins from the bovine blood sample.     

Mechanisms underlying molecularly imprinted polymer molecular memory and the role of crosslinker: resolving debate on the nature of template recognition in phenylalanine anilide imprinted polymers

A series of molecular dynamics simulations of prepolymerization mixtures for phenylalanine anilide imprinted co-(ethylene glycol dimethacrylate-methacrylic acid) molecularly imprinted polymers have been employed to investigate the mechanistic basis for template selective recognition in these systems. This has provided new insights on the mechanisms underlying template recognition, in particular the significant role played by the crosslinking agent. Importantly, the study supports the occurrence of template self-association events that allows us to resolve debate between the two previously proposed models used to explain this system's underlying recognition mechanisms. Moreover, the complexity of the molecular level events underlying template complexation is highlighted by this study, a factor that should be considered in rational molecularly imprinted polymer design, especially with respect to recognition site heterogeneity.     

Synthesis of nano‐sized hydrogen phosphate‐imprinted polymer in acetonitrile/water mixture and its use as a recognition element of hydrogen phosphate selective all‐solid state potentiometric electrode

Herein, a new recipe is introduced for the preparation of hydrogen phosphate ion‐imprinted polymer nanoparticles (nano‐IIP) in acetonitrile/water (63.5:36.5) using phosphoric acid as the template. The nano‐IIP obtained was used as the recognition element of a carbon paste potentiometric sensor. The IIP electrode showed a Nernstian response to hydrogen phosphate anion; whereas, the non‐imprinted polymer (NIP)‐based electrode had no considerable sensitivity to the anion. The presence of both methacrylic acid and vinyl pyridine in the IIP structure, as well as optimization of the functional monomers‐template proportion, was found to be important to observe the sensing capability of the IIP electrode. The nano‐IIP electrode showed a dynamic linear range of 1 × 10^?5‐1 × 10^?1 mol L‐1, Nernstian slope of 30.6 ± (0.5) mV decade ^?1, response time of 25 seconds, and detection limit of 4.0 × 10^?6 mol L^?1. The utility of the electrodes was checked by potentiometric titration of hydrogen phosphate with La³⁺ solution.     

Molecular recognition by gold, silver and copper nanoparticles

The intrinsic physical properties of the noble metal nanoparticles,which are highly sensitive to the nature of their local molecular environment,make such systems ideal for the detection of molecular recognition events.The current review describes the state of the art concerning molecular recognition of Noble metal nanoparticles.In the first part the preparation of such nanoparticles is discussed along with methods of capping and stabilization.A brief discussion of the three common methods of functionalization:Electrostatic adsorption;Chemisorption;Affinity-based coordination is given.In the second section a discussion of the optical and electrical properties of nanoparticles is given to aid the reader in understanding the use of such properties in molecular recognition.In the main section the various types of capping agents for molecular recognition;nucleic acid coatings,protein coatings and molecules from the family of supramolecular chemistry are described along with their numerous applications.Emphasis for the nucleic acids is on complementary oligonucleotide and aptamer recognition.For the proteins the recognition properties of antibodies form the core of the section.With respect to the supramolecular systems the cyclodextrins,calix[n]arenes,dendrimers,crown ethers and the cucurbitales are treated in depth.Finally a short section deals with the possible toxicity of the nanoparticles,a concern in public health.     

Theoretical investigations of the experimentally observed selectivity of a cobalt imprinted polymer

A cobalt imprinted polymer synthesised, for reducing the volume of radioactive waste generated during nuclear reactor decontaminations, using vinylbenzyl iminodiacetate (VbIDA) as the functional ligand, has been found to be selective for cobaltous ions over excess ferrous ions. The selectivity of the polymer has been investigated through theoretical calculation of the formation energies of complexes involved by using the ab-initio density functional theory (DFT) code SIESTA (Spanish Initiative for Electronic Simulations with Thousands of Atoms). The formation energies of complexes of Fe²⁺, Co²⁺, Cu²⁺ and Ni²⁺ with the free functional ligands as well as with ligands attached to the crosslinkers have been calculated. The calculations revealed that the ferrous forms an unstable complex with the ligands attached to the crosslinkers. The formation energy calculation results were found to corroborate the experimentally observed selectivity order.     

Probing the role of the divalent metal ion in uteroferrin using metal ion replacement and a comparison to isostructural biomimetics

Purple acid phosphatases (PAPs) are a group of heterovalent binuclear metalloenzymes that catalyze the hydrolysis of phosphomonoesters at acidic to neutral pH. While the metal ions are essential for catalysis, their precise roles are not fully understood. Here, the Fe(III)Ni(II) derivative of pig PAP (uteroferrin) was generated and its properties were compared with those of the native Fe(III)Fe(II) enzyme. The k _cat of the Fe(III)Ni(II) derivative (approximately 60 s⁻¹) is approximately 20% of that of native uteroferrin, and the Ni(II) uptake is considerably faster than the reconstitution of full enzymatic activity, suggesting a slow conformational change is required to attain optimal reactivity. An analysis of the pH dependence of the catalytic properties of Fe(III)Ni(II) uteroferrin indicates that the μ-hydroxide is the likely nucleophile. Thus, the Ni(II) derivative employs a mechanism similar to that proposed for the Ga(III)Zn(II) derivative of uteroferrin, but different from that of the native enzyme, which uses a terminal Fe(III)-bound nucleophile to initiate catalysis. Binuclear Fe(III)Ni(II) biomimetics with coordination environments similar to the coordination environment of uteroferrin were generated to provide both experimental benchmarks (structural and spectroscopic) and further insight into the catalytic mechanism of hydrolysis. The data are consistent with a reaction mechanism employing an Fe(III)-bound terminal hydroxide as a nucleophile, similar to that proposed for native uteroferrin and various related isostructural biomimetics. Thus, only in the uteroferrin-catalyzed reaction are the precise details of the catalytic mechanism sensitive to the metal ion composition, illustrating the significance of the dynamic ligand environment in the protein active site for the optimization of the catalytic efficiency. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Polymer membrane ion-selective electrodes as a convenient tool for lipases and esterases assays

We have proposed a novel assay for lipases and esterases activity determination based on potentiometry with ion-selective electrodes (ISEs). Enzyme preparations, obtained from the living cells, are complex mixtures of various proteins, short peptides, lipids, carbohydrates, and other compounds. The most commonly used quantitative methods in enzyme studies are based on spectrophotometric or spectroflourimetric protocols which has significant limitations. They are not valid for samples that are turbid or strongly colored. To overcome those drawbacks we have proposed an assay based on potentiometry with ISEs for lipases and esterases activity determination. This electrochemical methodology represents an attractive tool for enzyme analysis, because of its low detection limit, independence from sample volume and from sample turbidity. The usefulness of this assay has been proven by the determination of the activity of various raw enzymes “acetone powders” isolated from animal tissues. Moreover, activities of fractions obtained during purification of one of those raw biocatalysts were also determined that way. The reliability of determination enzyme activity with ISE assay was proven by comparison with a classical spectrophotometric method.     

Synthesis and evaluation of a selective molecularly imprinted polymer for the contraceptive drug levonorgestrel

A molecularly imprinted polymer (MIP) has been prepared using levonorgestrel (LEV) as template. The polymer was synthesised in a non-covalent approach using methacrylic acid (MAA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linking monomer via a free radical polymerization. An equivalent blank polymer was also synthesised in the absence of the template compound. Batch adsorption experiments were used to evaluate the binding affinity of the imprinted polymer. After packing MIP into a stainless steel column (150 mm x 4.6 mm i.d.), retention and elution of the template and related compounds were evaluated by high-performance liquid chromatography (HPLC). This LEV imprinted polymer was further applied for selective solid phase extraction (SPE) of LEV from human serum. It was confirmed that the binding ability of the prepared MIP for LEV was essentially sufficient in the presence of other compounds coexisting in serum sample. Therefore, as a selective and efficient solid phase material, LEV imprinted polymer has a high potential application in analysis of this steroidal hormone in clinical purposes.     

Probing the metal ion selectivity in methionine aminopeptidase via changes in the luminescence properties of the enzyme bound europium ion

We report herein, for the first time, that Europium ion (Eu³⁺) binds to the “apo” form of Escherichia coli methionine aminopeptidase (EcMetAP), and such binding results in the activation of the enzyme as well as enhancement in the luminescence intensity of the metal ion. Due to competitive displacement of the enzyme-bound Eu³⁺ by different metal ions, we could determine the binding affinities of both “activating” and “non-activating” metal ions for the enzyme via fluorescence spectroscopy. The experimental data revealed that among all metal ions, Fe²⁺ exhibited the highest binding affinity for the enzyme, supporting the notion that it serves as the physiological metal ion for the enzyme. However, the enzyme-metal binding data did not adhere to the Irving-William series. On accounting for the binding affinity vis a vis the catalytic efficiency of the enzyme for different metal ions, it appears evident that that the “coordination states” and the relative softness” of metal ions are the major determinants in facilitating the EcMetAP catalyzed reaction.     

Assessment of molecularly imprinted sol-gel materials for selective room temperature phosphorescence recognition of nafcillin

Sol-gel imprinted materials were prepared against nafcillin, a semisynthetic beta-lactamic antibiotic employed in the treatment of serious infections caused by penicillinase-producing staphylococci. Two approaches were addressed for preparation of the imprinted materials and the controls: as conventional monoliths, which were ground and sieved to a desired particle size for rebinding analysis, and as films on supporting glass slides. The specific binding sites that are created during the imprinting process are analyzed via selective room temperature phosphorescence (RTP) (sol-gel films) measurements as well as via competitive room temperature phosphorescence ligand assay. Results demonstrated the importance of the physical configuration of the imprinted material for minimizing non-specific binding. The close similarities between the structures of different beta-lactamic antibiotics made it possible to interpret the roles of the template structure on specific molecular recognition. In this article, we introduce the use of room temperature phosphorescence as selective transduction method for the template. The imprinted sol-gel films displayed enhanced specific binding characteristics respect to the monolithic sol-gel and can be envisaged for the use as recognition matrices for the screening and rapid selection of antibiotics from a combinatorial library or for the rapid control of nafcillin in biological samples (e.g. milk, serum, urine).     

Synthesis and characterization of ion‐imprinted resin for selective removal of UO2(II) ions from aqueous medium

In this work, uranyl ion‐imprinted resin based on 2‐(((4‐hydroxyphenyl)amino)methyl)phenol was synthesized by condensation polymerization of its uranyl complex in presence of resorcinol and formaldehyde cross‐linkers. Numerous instrumental techniques including elemental analysis, Fourier transform infrared spectroscopy, ultraviolet, ¹H along with ¹³C nuclear magnetic resonance spectroscopy have been employed for complete characterization of the synthesized ligand and its uranyl complex. Additionally, the obtained ion‐imprinted and non‐imprinted resins were investigated using scanning electron microscope and Fourier transform infrared spectroscopy. The effects of various essential parameters such as pH, temperature and contact time on removal of uranyl ions have been examined, and the results indicated that the obtained resin exhibited the optimum activity at pH 5. Furthermore, the adsorption process was spontaneous at all studied temperatures and followed the second‐order kinetics model. Also, Langmuir adsorption isotherm exhibited the best fit with the experimental results with maximum adsorption capacity 139.3 mg/g. Moreover, the selectivity studies revealed that the ion‐imprinted resin exhibited an obvious affinity toward the uranyl ions in presence of other metal ions compared with the non‐imprinted resin. Copyright © 2015 John Wiley & Sons, Ltd.     

New biosourced chiral molecularly imprinted polymer: Synthesis,characterization, and evaluation of the recognition capacity of methyltestosterone

New biosourced chiral cross‐linkers were reported for the first time in the synthesis of methyltestosterone (MT) chiral molecularly imprinted polymers (cMIPs). Isosorbide and isomannide, known as 1,4:3,6‐dianhydrohexitols, were selected as starting diols. The cMIPs were synthesized following a noncovalent approach via thermal radical polymerization and monitored by Raman spectroscopy. These cross‐linkers were fully characterized by ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy and high‐resolution mass spectrometry. The cross‐polarization magic angle spinning ¹³C NMR, Fourier transform infrared spectroscopy, scanning electron microscopy, and specific surface areas following the Brunauer‐Emmett‐Teller (BET) method were used to characterize the cMIPs. The effect of stereochemistry of cross‐linkers on the reactivity of polymerization, morphology, and adsorption‐recognition properties of the MIP was evaluated. The results showed that the cMIP exhibited an obvious improvement in terms of rebinding capacity for MT as compared with the nonimprinted polymer (NIP). The highest binding capacity was observed for cMIP‐Is (27.298 mg g⁻¹) for high concentrations (500 mg L⁻¹). However, the isomannide homologue cMIP‐Im showed higher recovery—up to 65% and capacity for low concentrations (15 mg L⁻¹). The experimental data were properly fitted by the Freundlich adsorption isothermal model.     

Investigation of the role of the substrate metal ion in the yeast inorganic pyrophosphatase reaction

The substrate activities of a series of tripositive metal ion-pyrophosphate complexes with yeast inorganic pyrophosphatase were examined. While the Michaelis constants for these complexes were shown to be between one and two orders of magnitude greater than that of the natural substrate, [Mg(H2O)4PPi]2-, the turnover numbers were in general comparable to that of [Mg(H2O)4PPi]2-. These data suggest that the nature of the metal ion cofactor effects substrate binding but in most cases not catalysis. Thus, the role of the metal ion in catalysis is probably restricted to that of an electron sink.     

Plastic antibody for the recognition of chemical warfare agent sulphur mustard

Molecularly imprinted polymers (MIPs) known as plastic antibodies (PAs) represent a new class of materials possessing high selectivity and affinity for the target molecule. Since their discovery, PAs have attracted considerable interest from bio- and chemical laboratories to pharmaceutical institutes. PAs are becoming an important class of synthetic materials mimicking molecular recognition by natural receptors. In addition, they have been utilized as catalysts, sorbents for solid-phase extraction, stationary phase for liquid chromatography and mimics of enzymes. In this paper, first time we report the preparation and characterization of a PA for the recognition of blistering chemical warfare agent sulphur mustard (SM). The SM imprinted PA exhibited more surface area when compared to the control non-imprinted polymer (NIP). In addition, SEM image showed an ordered nano-pattern for the PA of SM that is entirely different from the image of NIP. The imprinting also enhanced SM rebinding ability to the PA when compared to the NIP with an imprinting efficiency () of 1.3.     

Molecularly imprinted cryogel cartridges for the selective recognition of tyrosine

Molecularly imprinted polymers are used for creating a specific cavity and selective recognition sites for the structure of a target molecule in a polymeric structure. In this study, specific molecularly imprinted cryogel cartridges were synthesized using two distinct functional monomers to compare imprinting efficiency for the selective recognition of Tyrosine (Tyr). Tyr-imprinted cryogel cartridge (MIP1) was prepared using metal-chelate coordination for the imprinting process by free-radical bulk polymerization under frozen conditions, and Tyr-imprinted cryogel cartridge (MIP2) was prepared in the same way using hydrophobic effects for imprinting. After the characterization of the cryogel cartridges was carried out, the optimum adsorption conditions of both were determined according to the different parameters such as flow rate (0.5–2.5 ml/min), pH of the medium (4.0–8.0), initial Tyr concentration (0.1–3.0 mg/ml), and temperature (4–45°C). Selectivity experiments of Tyr-imprinted and non-imprinted cryogel cartridges were carried out by using phenylalanine, tryptophan, and cysteine. Besides, the eluted Tyr from MIP1 and MIP2 cryogel cartridge were applied to FPLC system. Also, the reusability experiments of Tyr-imprinted cryogel cartridges was observed no significant decrease in the adsorption capacity.