Surface Plasmon Resonance Studies of the Hybridization Behavior of DNA-Modified Gold Nanoparticles with Surface-Attached DNA Probes

Colloidal gold nanoparticles (AuNPs) have been extensively investigated as amplification tags to improve the sensitivity of surface plasmon resonance (SPR) biosensors. When using the so-called AuNP-enhanced SPR technique for DNA detection, the density of single-stranded DNA (ssDNA) on both the AuNPs and planar gold substrates is of crucial importance. Thus, in this work, we carried out a systematical study about the influence of surface ssDNA density onto the hybridization behavior of various DNA-modified AuNPs (DNA-AuNPs) with surface-attached DNA probes by using surface plasmon resonance spectroscopy. The lateral densities of the ssDNA on both the AuNPs and planar gold substrates were controlled by using different lengths of oligo-adenine sequence (OAS) as anchoring group. Besides SPR measurements, the amount of the captured DNA-AuNPs after the hybridization was further identified via atomic force microscope (AFM). SPR and AFM results clearly indicated that a higher ssDNA density on either the AuNPs or the gold substrates would give rise to better hybridization efficiency. Moreover, SPR data showed that the captured DNA-AuNPs could not be removed from SPR sensor surfaces using various dehybridization solutions regardless of surface ssDNA density. Consequently, it is apparent that the hybridization behavior of DNA-AuNPs was different from that of solution-phase ssDNA. Based on these data, we hypothesized that both multiple recognitions and limited accessibility might account for the hybridization of DNA-AuNPs with surface-attached ssDNA probes.

     

Sex determination based on amelogenin DNA by modified electrode with gold nanoparticle

We have developed a simple and renewable electrochemical biosensor based on carbon paste electrode (CPE) for the detection of DNA synthesis and hybridization. CPE was modified with gold nanoparticles (AuNPs), which are helpful for immobilization of thiolated bioreceptors. AuNPs were characterized by scanning electron microscopy (SEM). Self-assembled monolayers (SAMs) of thiolated single-stranded DNA (SH–ssDNA) of the amelogenin gene was formed on CPE. The immobilization of the probe and its hybridization with the target DNA was optimized using different experimental conditions. The modified electrode was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The electrochemical response of ssDNA hybridization and DNA synthesis was measured using differential pulse voltammetry (DPV) with methylene blue (MB) as an electroactive indicator. The new biosensor can distinguish between complementary and non-complementary strands of amelogenin ssDNA. Genomic DNA was extracted from blood and was detected based on changes in the MB reduction signal. These results demonstrated that the new biosensor could be used for sex determination. The proposed biosensor in this study could be used for detection and discrimination of polymerase chain reaction (PCR) products of amelogenin DNA.     

Direct electrochemical sensor for label-free DNA detection based on zero current potentiometry

A direct electrochemical DNA biosensor based on zero current potentiometry was fabricated by immobilization of ssDNA onto gold nanoparticles (AuNPs) coated pencil graphite electrode (PGE). One ssDNA/AuNPs/PGE was connected in series between clips of working and counter electrodes of a potentiostat, and then immersed into the solution together with a reference electrode, establishing a novel DNA biosensor for specific DNA detection. The variation of zero current potential difference (ΔE(zcp)) before and after hybridization of the self-assembled probe DNA with the target DNA was used as a signal to characterize and quantify the target DNA sequence. The whole DNA biosensor fabrication process was characterized by cyclic voltammetry and electrochemical impedance spectroscopy with the use of ferricyanide as an electrochemical redox indicator. Under the optimized conditions, ΔE(zcp) was linear with the concentrations of the complementary target DNA in the range from 10nM to 1μM, with a detection limit of 6.9nM. The DNA biosensor showed a good reproducibility and selectivity. Prepared DNA biosensor is facile and sensitive, and it eliminates the need of using exogenous reagents to monitor the oligonucleotides hybridization.     

A sensitive signal-on electrochemical assay for MTase activity using AuNPs amplification

A sensitive and simple signal-on electrochemical assay for detection of Dam methyltransferase (MTase) activity based on DNA-functionalized gold nanoparticles (AuNPs) amplification coupled with enzyme-linkage reactions is presented. This new assay takes advantage of the steric hindrance of AuNPs and the electrostatic repulsion between the negative-charge phosphate backbones of DNA modified on the AuNPs and redox probe [Fe(CN)(6)](3-/4-). In this method, the self-assembled ssDNA on the electrode is hybridized with its complement ssDNA modified on AuNPs to form dsDNA AuNPs bioconjugates containing specific recognition sequence of Dam MTase and methylation-sensitive restriction endonuclease Dpn I. Then, the AuNPs approach to the electrode and result in blockage of electronic transmission. It is eT OFF state. In the presence of Dam MTase and Dpn I, the specific sequence is methylated and cleavaged, which in turn release the DNA modified AuNPs from the electrode surface allowing free exchange of electrons. It generates a measurable electrochemical signal (eT ON). Differential pulse voltammetry (DPV) is employed to detect the recover current, which is related to the concentration of the Dam MTase. This method is simple, sensitive, nonradioactive and without use of gel-electrophoresis, PCR or chromatographic separation. Under optimized conditions, a linear response to concentration of Dam MTase range from 0.2U/mL to 10 U/mL and a detection limit of 0.12 U/mL are obtained. Furthermore, our new assay is a promising method to detect Dam MTase in the Luria-Bertani (LB) medium, as well as to screen inhibitors or drugs for Dam MTase.     

Ultrasensitive electrical detection of protein using nanogap electrodes and nanoparticle-based DNA amplification

The present study describes an ultrasensitive protein biochip that employs nanogap electrodes and self-assembled nanoparticles to electrically detect protein. A bio-barcode DNA technique amplifies the concentration of target antigen at least 100-fold. This technique requires the establishment of conjugate magnetic nanoparticles (MNPs) and gold nanoparticles (AuNPs) through binding between monoclonal antibodies (2B2), the target antigen, and polyclonal antibodies (GP). Both GP and capture ssDNA (single-strand DNA) bonds to bio-barcode ssDNA are immobilized on the surface of AuNPs. A denature process releases the bio-barcode ssDNAs into the solution, and a hybridization process establishes multilayer AuNPs over the gap surface between electrodes. Electric current through double-layer self-assembled AuNPs is much greater than that through self-assembled monolayer AuNPs. This significant increase in electric current provides evidence that the solution contains the target antigen. Results show that the protein biochip attains a sensitivity of up to 1 pg/μL.     

Electrochemical detection of the MT-ND6 gene and its enzymatic digestion: Application in human genomic sample

A simple electrochemical biosensor was developed for the detection of the mitochondrial NADH dehydrogenase 6 gene (MT-ND6) and its enzymatic digestion by BamHI enzyme. This biosensor was fabricated by modification of a glassy carbon electrode with gold nanoparticles (AuNPs/GCE) and a probe oligonucleotide (ssDNA/AuNPs/GCE). The probe, which is a thiolated segment of the MT-ND6 gene, was deposited by self-assembling immobilization on AuNPs/GCE. Two indicators including methylene blue (MB) and neutral red (NR) were used as the electroactive indicators and the electrochemical response of the modified electrode was measured by differential pulse voltammetry. The proposed biosensor can detect the complementary sequences of the MT-ND6 gene. Also the modified electrode was used for the detection of an enzymatic digestion process by BamHI enzyme. The electrochemical biosensor can detect the MT-ND6 gene and its enzymatic digestion in polymerase chain reaction (PCR)-amplified DNA extracted from human blood. Also the biosensor was used directly for detection of the MT-ND6 gene in all of the human genome.     

Nanoparticle based DNA biosensor for tuberculosis detection using thermophilic helicase-dependent isothermal amplification

The present study describes the development of a DNA based biosensor to detect Mycobacterium tuberculosis using thermophilic helicase-dependent isothermal amplification (tHDA) and dextrin coated gold nanoparticles (AuNPs) as electrochemical reporter. The biosensor is composed of gold nanoparticles (AuNPs) and amine-terminated magnetic particles (MPs) each functionalized with a different DNA probe that specifically hybridize with opposite ends of a fragment within the IS6110 gene, which is M. tuberculosis complex (MTC) specific. After hybridization, the formed complex (MP-target-AuNP) is magnetically separated from the solution and the AuNPs are electrochemically detected on a screen printed carbon electrode (SPCE) chip. The obtained detection limit is 0.01 ng/μl of isothermally amplified target (105 bp). This biosensor system can be potentially implemented in peripheral laboratories with the use of a portable, handheld potentiostat.     

Protease-activated quantum dot probes

We have developed a novel nanoparticulate luminescent probe with inherent signal amplification upon interaction with a targeted proteolytic enzyme. This construct may be useful for imaging in cancer detection and diagnosis. In this system, quantum dots (QDs) are bound to gold nanoparticles (AuNPs) via a proteolytically degradable peptide sequence to non-radiatively suppress luminescence. A 71% reduction in luminescence was achieved with conjugation of AuNPs to QDs. Release of AuNPs by peptide cleavage restores radiative QD photoluminescence. Initial studies observed a 52% rise in luminescence over 47 h of exposure to 0.2 mg/mL collagenase. These probes can be customized for targeted degradation simply by changing the sequence of the peptide linker.     

Electrochemical measurement of DNA hybridization using nanosilver as label and horseradish peroxidase as enhancer

A simple and sensitive electrochemical DNA biosensor based on in situ DNA amplification with nanosilver as label and horseradish peroxide (HRP) as enhancer has been designed. The thiolated oligomer single-stranded DNA (ssDNA) was initially directly immobilized on a gold electrode, and quartz crystal microbalance (QCM) gave the specific amount of ssDNA adsorption of 6.3 ± 0.1 ng/cm². With a competitive format, hybridization reaction was carried out via immersing the DNA biosensor into a stirred hybridization solution containing different concentrations of the complementary ssDNA and constant concentration of nanosilver-labeled ssDNA, and then further binding with HRP. The adsorbed HRP amount on the probe surface decreased with the increment of the target ssDNA in the sample. The hybridization events were monitored by using differential pulse voltammetry (DPV) with the adsorbed HRP toward the reduction of H₂O₂. The reduction current from the enzyme-generated product was related to the number of target ssDNA molecules in the sample. A detection of 15 pmol/L for target ssDNA was obtained with the electrochemical DNA biosensor. Additionally, the developed approach can effectively discriminate complementary from non-complementary DNA sequence, suggesting that the similar enzyme-labeled DNA assay method hold great promises for sensitive electrochemical biosensor applications.     

A novel electrochemical immunoassay based on diazotization-coupled functionalized bioconjugates as trace labels for ultrasensitive detection of carcinoembryonic antigen

In this article, a novel sandwich-type electrochemical immunosensor based on the signal amplification strategy of diazotization-coupling concept for ultrasensitive detection of carcinoembryonic antigen (CEA) was reported. It operates through physisorption of monoclonal anti-CEA on 4-aminothiophenol (4Atp) functionalized gold electrode interface as the detection platform. Diazo-4Atp-coupled-thionine (Thi)-conjugated gold nanoparticles (GNPs) were prepared for immobilization of horseradish peroxidase (HRP) and secondary anti-CEA to form core-shell bioconjugates that were used as electrochemical signal amplification reagent. The sensitivity of the immunosensor was greatly amplified by a dual amplification: one is that a large number of thionine and HRP was introduced on the electrode surface through sandwich immunoreaction, the other is that HRP as enhancer could catalyze the oxidation reaction of thionine by H(2)O(2), which results in great enhancement of the reduction peak current. Thus, the bioconjugates-based assay provided an amplification approach for detecting CEA at trace levels and led to a detection limit as low as 0.7 pg/mL (at a three times signal-to-noise ratio) that is well-below the threshold value of 2.5 ng/mL for clinical diagnosis. The assay was evaluated for clinical serum samples with various CEA concentrations and received in excellent accordance with the results obtained from the referenced enzyme-linked immunosorbent assay (ELISA).     

Dual signal amplification of surface plasmon resonance imaging for sensitive immunoassay of tumor marker

Surface plasmon resonance imaging (SPRi) is an intriguing technique for immunoassay with the inherent advantages of being high throughput, real time, and label free, but its sensitivity needs essential improvement for practical applications. Here, we report a dual signal amplification strategy using functional gold nanoparticles (AuNPs) followed by on-chip atom transfer radical polymerization (ATRP) for sensitive SPRi immunoassay of tumor biomarker in human serum. The AuNPs are grafted with an initiator of ATRP as well as a recognition antibody, where the antibody directs the specific binding of functional AuNPs onto the SPRi sensing surface to form immunocomplexes for first signal amplification and the initiator allows for on-chip ATRP of 2-hydroxyethyl methacrylate (HEMA) from the AuNPs to further enhance the SPRi signal. High sensitivity and broad dynamic range are achieved with this dual signal amplification strategy for detection of a model tumor marker, α-fetoprotein (AFP), in 10% human serum.     

Mutation analysis of p53, K-ras, and BRAF genes in colorectal cancer progression

Gene mutations in APC, K-ras, and p53 are thought to be essential events for colorectal cancer development. Recent data seem to indicate that K-ras and p53 mutations rarely co-exist in the same tumor, indicating that these alterations do not represent a synergistic evolutionary pathway. Moreover, an inverse relation between K-ras gene activation and BRAF mutations has been demonstrated, suggesting alternative pathways for colorectal cancer transformation. To reconstruct the chronological modulation of these gene mutations during cell transformation and colorectal cancer progression, mutations of p53, K-ras, and BRAF genes were analyzed by Single Strand Conformation Polymorphism (SSCP) or sequencing analysis in 100 colorectal cancer samples, evenly distributed among different Dukes' stages. We found mutations in p53, K-ras, and BRAF genes in 35%, 30%, and 4% of tumors, respectively, and observed a minimal or no co-presence of these gene alterations. Moreover, the frequency of molecular p53 mutations increased as tumor stage increased, suggesting an important role for this gene in the progression of colorectal cancer. Conversely, K-ras or BRAF genes were not related to tumor stage or location. These data seem to indicate the absence of a co-presence of the genes, highlighting the possibility of multiple pathways for colorectal tumor progression. Moreover, mutations in p53, K-ras, and BRAF are not present in about one-third of colorectal cancers and therefore other gene mutations need to be investigated to better understand molecular mechanisms at the basis of cell transformation and the progression of colorectal cancer.     

Can K-ras Gene Mutation Be Utilized as Prognostic Biomarker for Colorectal Cancer Patients Receiving Chemotherapy? A Meta-Analysis and Systematic Review

Introduction

K-ras gene mutations were common in colorectal patients, but their relationship with prognosis was unclear.

Objective

Verify prognostic differences between patient with and without mutant K-ras genes by reviewing the published evidence.

Method

Systematic reviews and data bases were searched for cohort/case-control studies of prognosis of colorectal cancer patients with detected K-ras mutations versus those without mutant K-ras genes, both of whom received chemotherapy. Number of patients, regimens of chemotherapy, and short-term or long-term survival rate (disease-free or overall) were extracted. Quality of studies was also evaluated.

Principal Findings

7 studies of comparisons with a control group were identified. No association between K-ras gene status with neither short-term disease free-survival (OR=1.01, 95% CI, 0.73-1.38, P=0.97) nor overall survival (OR=1.06, 95% CI, 0.82-1.36, P=0.66) in CRC patients who received chemotherapy was indicated. Comparison of long-term survival between two groups also indicated no significant difference after heterogeneity was eliminated (OR=1.09, 95% CI, 0.85-1.40, P=0.49).

Conclusions

K-ras gene mutations may not be a prognostic index for colorectal cancer patients who received chemotherapy.     

Simple detection of nucleic acids with a single-walled carbon-nanotube-based electrochemical biosensor

We report for the first time a simple approach to fabricate an electrochemical DNA (E-DNA) biosensor by introducing the single-walled carbon nanotubes (SWNTs). The SWNTs combine with the electrochemical label (methyl blue, MB)-modified single-stranded DNA (ssDNA) probes to generate a nanomaterial-biomolecule composite, which functions as a signal amplification platform to facilitate the electron-transfer between the electrochemical label and the electrode. This SWNT-based E-DNA biosensor produces a high square wave voltammetry (SWV) signal in the absence of target DNA. In the presence of target DNA, the MB-labeled ssDNA probes are removed from the SWNT-modified electrode due to the formation of a double-stranded DNA (dsDNA), generating a relatively low SWV signal. This signal-off SWNT-based E-DNA biosensor exhibits improved sensitivity and large linear dynamic range with low detection limit; it can even distinguish 1-base mismatched target DNA. Further experiments demonstrate that the SWNT-based E-DNA biosensor is superior to the multi-walled carbon nanotube (MWNT)-based one for DNA detection. Moreover, the introduction of aptamer into the SWNT-based biosensor might be further extended to detect small biomolecules such as adenosine.     

Gold nanoparticle-based signal amplification for biosensing

Colloidal gold nanoparticles (AuNPs), with unique properties such as highly resonant particle plasmons, direct visualization of single nanoclusters by scattering of light, catalytic size enhancement by silver deposition, conductivity, and electrochemical properties, are very attractive materials for several applications in biotechnology. Furthermore, as excellent biological tags, AuNPs can be easily conjugated with biomolecules and retain the biochemical activity of the tagged biomolecules, making AuNPs ideal transducers for several biorecognition applications. The goal of this article is to review recent advances of using AuNPs as labels for signal amplification in biosensing applications. We focus on the signal amplification strategies of AuNPs in biosensing/biorecognition, more specifically, on the main optical and electrochemical detection methods that involve AuNP-based biosensing. Particular attention is given to recent advances and trends in sensing applications.     

两种等位基因特异性扩增方法在结肠癌K-ras癌基因点突变检测中的应用比较

针对传统电泳检测方法存在操作复杂、费时等缺点,提出一种用于检测K-ras癌基因点突变的实时荧光等位基因特异性扩增（Allele specific amplification,ASA）方法。该法采用突变型引物对结肠癌基因组中的K-ras基因进行等位基因特异性扩增,只有突变型样品能被顺利扩增出双链DNA产物,该产物能与双链DNA染料SYBR GreenⅠ结合,产生荧光信号从而被检测到。通过对荧光域值和溶解曲线分析来区分不同的基因突变类型。该法可以检测到野生型DNA中含量为1/1 000的突变型DNA,整个检测时间小于1 h。我们用该法检测31例结肠癌样品中K-ras基因密码子12发生的点突变,其中有15例检出为阳性。此外,还采用等位基因特异性扩增结合电泳分析对样品进行了检测,并对两种方法进行了比较。结果显示：实时荧光等位基因特异性扩增方法具有操作简便、快速、检测成本低等优点,为临床诊断基因突变引起的疾病提供了一种可行的手段。     

Sensitive detection of p53 tumor suppressor gene using an enzyme-based solid-state electrochemiluminescence sensing platform

An enzyme-based solid-state electrochemiluminescence (ECL) sensing platform for sensitive detection of a single point mutation is developed successfully using p53 tumor suppressor gene as a model analyte. A composite of multiwalled carbon nanotubes and Ruthenium (II) tris-(bipyridine) (MWNTs-Ru(bpy)(3)(2+)) was prepared and coated on an electrode surface, which was covered by polypyrrole (PPy) to immobilize ssDNA. Then, the ssDNA recognized the gold nanoparticle (AuNP)-labeled p53 tumor suppressor gene, and produced AuNP-dsDNA electrode with AuNP layer. The surface adsorbed the glucose-dehydrogenase (GDH) molecules for producing ECL signal. This system combined enzyme reaction with ECL detection, and it can recognize sequence-specific wild type p53 sequence (wtp53) and muted type p53 sequence (mtp53) with discrimination of up to 56.3%. The analytic results were sensitive and specific. It holds promise for the diagnosis and management of cancer.     

Design of ultrasensitive bisphenol A–aptamer based on platinum nanoparticles loading to polyethyleneimine-functionalized carbon nanotubes

Here, a highly sensitive electrochemical aptasensor based on a novel signal amplification strategy for the determination of bisphenol A (BPA) was developed. Construction of the aptasensor began with the deposition of highly dispersed platinum nanoparticles (PtNPs)/acid-oxidized carbon nanotubes (CNTs–COOH) functionalized with polyethyleneimine (PEI) at the surface of glassy carbon (PtNPs/PEI/CNTs–COOH/GC) electrode. After immobilizing the amine-capped capture probe (ssDNA1) through the covalent amide bonds formed by the carboxyl groups on the nanotubes and the amino groups on the oligonucleotides, we employed a designed complementary BPA–aptamer (ssDNA2) as a detection probe to hybridize with the ssDNA1. By adding BPA as a target, the aptamer specifically bound to BPA and its end folded into a BPA-binding junction. Because of steric/conformational restrictions caused by aptamer–BPA complex formation at the surface of modified electrode, the interfacial electron transfer of [Fe(CN)₆]^3−/4− as a probe was blocked. Sensitive quantitative detection of BPA was carried out by monitoring the decrease of differential pulse voltammetric responses of [Fe(CN)₆]^3−/4− peak current with increasing BPA concentrations. The newly developed aptasensor embraced a number of attractive features such as ease of fabrication, low detection limit, excellent selectivity, good stability and a wide linear range with respect to BPA.     

Enhancement of DNA immobilization and hybridization on gold electrode modified by nanogold aggregates

Gold electrodes modified by nanogold aggregates (nanogold electrode) were obtained by the electrodeposition of gold nanoparticles onto planar gold electrode. The Electrochemical response of single-stranded DNA (ssDNA) probe immobilization and hybridization with target DNA was measured by cyclic voltammograms (CV) using methylene blue (MB) as an electroactive indicator. An improving method using long sequence target DNA, which greatly enhanced the response signal during hybridization, was studied. Nanogold electrodes could largely increase the immobilization amount of ssDNA probe. The hybridization amount of target DNA could be increased several times for the manifold nanogold electrodes. The detection limit of nanogold electrode for the complementary 16-mer oligonucleotide (target DNA1) and long sequence 55-mer oligonucleotide (target DNA2) could reach the concentration of 10(-9) mol/L and 10(-11) mol/L, respectively, which are far more sensitive than that of the planar electrode.     

An ultrasensitive supersandwich electrochemical DNA biosensor based on gold nanoparticles decorated reduced graphene oxide

In this article, a supersandwich-type electrochemical biosensor for sequence-specific DNA detection is described. In design, single-strand DNA labeled with methylene blue (MB) was used as signal probe, and auxiliary probe was designed to hybridize with two different regions of signal probe. The biosensor construction contained three steps: (i) capture DNA labeled with thiol was immobilized on the surface of gold nanoparticles decorated reduced graphene oxide (Au NPs/rGO); (ii) the sandwich structure formation contained “capture–target–signal probe”; and (iii) auxiliary probe was introduced to produce long concatamers containing signal molecule MB. Differential pulse voltammetry (DPV) was used to monitor the DNA hybridization event using peak current changes of MB in phosphate-buffered saline (PBS) containing 1.0 M NaClO₄. Under optimal conditions, the peak currents of MB were linear with the logarithm of the concentration of target DNA in the range of 0.1 μM to 0.1 fM with a detection limit of 35 aM (signal/noise = 3). In addition, this biosensor exhibited good selectivity even for single-base mismatched target DNA detection.