Ultrasensitive DNA sensor based on gold nanoparticles/reduced graphene oxide/glassy carbon electrode

We have designed a simple and novel electrochemical biosensor based on glassy carbon electrode (GCE) for DNA detection. GCE was modified with reduced graphene oxide (RGO) and gold nanoparticles (AuNPs) by the electrochemical method, which is helpful for immobilization of thiolated bioreceptors. The electrode modification processes were characterized by scanning electron microscopy (SEM) and electrochemical methods. Then a single-stranded DNA (ssDNA) probe for BRCA1 5382 insC mutation detection was immobilized on the modified electrode for a specific time. The experimental conditions, such as probe immobilization time and target DNA (complementary DNA) hybridization time and temperature with probe DNA, were optimized using electrochemical methods. The electrochemical response for DNA hybridization and synthesis was measured using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) methods. The calibration graph contains two linear ranges; the first part is in the range of 3.0 × 10⁻²⁰ to 1.0 × 10⁻¹² M, and the second segment part is in the range of 1.0 × 10⁻¹² to 1.0 × 10⁻⁷ M. The biosensor showed excellent selectivity for the detection of the complementary sequences from noncomplementary sequences, so it can be used for detection of breast cancer.     

Electrochemical analysis of the alanine phenylthiohydantoin derivative by cathodic stripping voltammetry

A square-wave cathodic stripping voltammetry method for alanine determination as its phenylthiohydantoin (PTH-alanine) derivative is developed. To this end, all the chemical and instrumental variables affecting the determination of PTH-alanine are optimized. From studies of the mechanisms governing the electrochemical response of PTH-alanine, it was concluded that it is an electrochemically irreversible system with a diffusive-adsorptive reduction phenomenon. Under optimal conditions, the variation of analytical signal (I_p) with PTH-alanine concentration is linear in the 2.4 × 10⁻⁸ − 4.8 × 10⁻⁷ M range, with a LOD of 1.2 × 10⁻⁸ M and a LOQ of 4.2 × 10⁻⁸ M, a RSD (%) less than 11%, and a E_r (%) less than 10%. The optimized method was applied to the determination of PTH-alanine obtained from a synthetic protein after Edman reaction and the results were corroborated by high-performance liquid chromatography with UV detection.     

Signaling related with biphasic effects of bisphenol A (BPA) on Sertoli cell proliferation: A comparative proteomic analysis

Background

Biphasic effects on cell proliferation of bisphenol A (BPA) can occur at lesser or greater exposures. Sertoli cells play a pivotal role in supporting proliferation and differentiation of germ cells. The mechanisms responsible for inverse effects of great and low concentrations of BPA on Sertoli cell proliferation need further study.

Methods

We utilized proteomic study to indentify the protein expression changes of Sertoli TM4 cells treated with 10^− 8 M and 10^− 5 M BPA. The further mechanisms related to mitochondria, energy metabolism and oxidative stress were investigated by qRT-PCR and Western-blotting analysis.

Results

Proteomic studies identified 36 proteins and two major clusters of proteins including energy metabolism and oxidative stress expressed with opposite changes in Sertoli cells treated with 10^− 8 M and 10^− 5 M BPA, respectively, for 24 h. Exposure to 10^− 5 M BPA resulted in greater oxidative stress and then inhibited cell proliferation, while ROS scavenger NAC effectively blocked these effects. Exposure to 10^− 8 M BPA caused higher intercellular ATP, greater activities of mitochondria, and resulted in significant proliferation of TM4 cells, while oligomycin A, an inhibitor of ATP synthase, abolished these growth advantages.

Conclusions

Our study demonstrated that micromolar BPA inhibits proliferation of Sertoli cells by elevating oxidative stress while nanomolar BPA stimulates proliferation by promoting energy metabolism.

General significance

Micromolar BPA inhibits cell proliferation by elevating oxidative stress while nanomolar BPA stimulates cell proliferation by promoting energy metabolism.     

Fluorescein-labeled “arch-like” DNA probes for electrochemical detection of DNA on gold nanoparticle-modified gold electrodes

In the present study, a gold nanoparticle-modified gold electrode (nanogold electrode) was used to develop a novel fluorescein electrochemical DNA biosensor based on a target-induced conformational change. The nanogold electrode was obtained by electrodepositing gold nanoparticles onto a bare gold electrode. This modification not only immobilized probe oligonucleotides, but also adsorbed fluorescein onto the surface of the gold nanoparticles to form an “arch-like” structure. This article compares the electrochemical signal changes caused by the hybridization of “arch-like” DNA on nanogold electrode and linear DNA on bare gold electrode. The results showed that the adsorption effect of nanogold can enhance the sensitivity of the sensor. The linear range of target ssDNA is from 2.0 × 10⁻⁹ M to 2.0 × 10⁻⁸ M with a correlation coefficient of 0.9956 and detection limit (3σ) of 7.10 × 10⁻¹⁰ M. Additionally, the specificity and hybridization response of this simple sensor were investigated.     

Mono-(2-ethylhexyl) phthalate (MEHP) regulates glucocorticoid metabolism through 11β-hydroxysteroid dehydrogenase 2 in murine gonadotrope cells

Di-(2-ethylhexyl) phthalate (DEHP) and its metabolite mono-(2-ethylhexyl) phthalate (MEHP) have been classified as toxicants to the reproductive system at the testis level and DEHP may also impair reproductive axis function at the pituitary levels. However, MEHP is 10-fold more potent than DEHP in toxicity and little is known about the toxicological effect of MEHP on pituitary. In this study, we demonstrated that 11β-hydroxysteroid dehydrogenase type 2 (11β-HSD2), not 11β-HSD1, is strongly expressed in murine gonadotrope LβT2 cells. Interestingly, MEHP inhibited Hsd11b2 mRNA level and 11β-HSD2 enzyme activity in LβT2 cells at as low as 10⁻⁷ M. Corticosterone (CORT) at a concentration of 10⁻⁶ M significantly inhibited LβT2 cell proliferation after 2-day culture, and 10⁻⁶ M RU486, an antagonist of glucocorticoid receptor (GR), reversed this inhibition. However, in the presence of 10⁻⁵ or 10⁻⁴ M MEHP, the minimal concentration of CORT to inhibit the proliferation of LβT2 cells was lowered to 10⁻⁷ M, and 10⁻⁶ M RU486 was not able to completely reverse the CORT effect. In conclusion, along with the regulation of GR, 11β-HSD2 may have a key role in glucocorticoid metabolism in LβT2 cells. MEHP may participate in the glucocorticoid metabolism in LβT2 cells through inhibition of 11β-HSD2 enzyme activity. Such perturbation may be of pathological significance as MEHP may interfere with the reproductive system at pituitary level through regulation of glucocorticoid metabolism, especially in neonates with higher risk of phthalates exposure.     

Determination of uric acid in human urine and serum by capillary electrophoresis with chemiluminescence detection

A simple and sensitive method based on capillary electrophoresis (CE) with chemiluminescence (CL) detection has been developed for the determination of uric acid (UA). The sensitive detection was based on the enhancement effect of UA on the CL reaction between luminol and potassium ferricyanide (K₃[Fe(CN)₆]) in alkaline solution. A laboratory-built reaction flow cell and a photon counter were deployed for the CL detection. Experimental conditions for CL detection were studied in detail to achieve a maximum assay sensitivity. Optimal conditions were found to be 1.0 × 10⁻⁴ M luminol added to the CE running buffer and 1.0 × 10⁻⁴ M K₃[Fe(CN)₆] in 0.2 M NaOH solution introduced postcolumn. The proposed CE-CL assay showed good repeatability (relative standard deviation [RSD] = 3.5%, n = 11) and a detection limit of 3.5 × 10⁻⁷ M UA (signal/noise ratio [S/N] = 3). A linear calibration curve ranging from 6.0 × 10⁻⁷ to 3.0 × 10⁻⁵ M UA was obtained. The method was evaluated by quantifying UA in human urine and serum samples with satisfactory assay results.     

On-line chemiluminescence determination of mitoxantrone by capillary electrophoresis

A novel capillary electrophoresis (CE) with chemiluminescence (CL) detection method for the determination of mitoxantrone (MTX) has been developed, which based on the CL reaction of potassium ferricyanide with luminol in sodium hydroxide medium sensitized by MTX. Under optimum analytical conditions, MTX is determined over the range of 7.0 × 10⁻⁸–1.0 × 10⁻⁶ M with a detection limit of 1.0 × 10⁻⁸ M. The relative standard deviation (RSD) was 3.7%, 2.6% and 3.0% for 7.0 × 10⁻⁸, 5.0 × 10⁻⁷ and 1.0 × 10⁻⁶ M MTX (n = 11), respectively. In laboratory-built CE–CL apparatus, the proposed method has been applied to determination of MTX in commercial drug and spiked in human urine and plasma with satisfactory results.     

Estrogenic activities of Psoralea corylifolia L. seed extracts and main constituents

Estrogenic activities of ethanol extract and its active components from Psoralea corylifolia L. were studied using various in vitro assays. The main components from ethanol extract were analyzed to be bakuchiol, psoralen, isobavachalcone, isobavachromene, and bavachinin. In a fractionation procedure, hexane and chloroform fractions showed estrogenic activity in yeast transactivation assay and E-screen assay. In yeast transactivation assay, ethanol extract, hexane, and chloroform fractions showed significantly higher activities at a concentration of 1.0 ng/ml, and bakuchiol at the concentration of 10⁻⁶ M was showed the highest activity, especially, which was higher than genistein at the same concentration. In E-screen assay, cell proliferation of bakuchiol (10⁻⁶ M) showed similar estrogenic activity with genistein (10⁻⁶ M). In ER binding assay, bakuchiol displayed the strongest ER-binding affinity (IC₅₀ for ERα = 1.01 × 10⁻⁶ M, IC₅₀ for ERβ = 1.20 × 10⁻⁶ M) and bakuchiol showed five times higher affinity for ERα than for ERβ.     

D-Lys-GHRP-6 antagonizes the effect of unacylated but not of acylated ghrelin on the growth of HECa10 murine endothelial cells

Recent studies demonstrate that ghrelin can be an endogenous regulator of angiogenesis. We studied direct effects of human acylated (hAG) and unacylated (hUAG) ghrelin, as well as of rat acylated ghrelin (rAG) on the growth of HECa10 murine endothelial cells. Ghrelin was applied separately or together with D-Lys³-GHRP-6, which is commonly used as an antagonist of ghrelin receptor type 1a – GHS-R1a. The growth of HECa10 cells was assessed with Mosmann and in selected study conditions also with BrdU and TUNEL methods. Both hAG and hUAG (10⁻⁵ M to 10⁻¹² M) inhibited the growth of HECa10 cells in 24 h and 72 h cultures. Similarly, rAG decreased the growth of the cells after 24 h (10⁻⁷ M and 10⁻¹¹ M), and after 72 h (10⁻⁷ M, 10⁻⁸ M and 10⁻¹¹ M). Unexpectedly, D-Lys³-GHRP-6 itself also inhibited the growth of these cells at 10⁻⁴ to 10⁻⁶ M in 24 h, 48 h (dose–response effect) and 72 h cultures. D-Lys³-GHRP-6 did not modify the inhibitory effect of rAG. However, D-Lys³-GHRP-6 at the concentration of 10⁻⁴ M diminished, abolished or even reversed the inhibitory effect of hUAG in 72 h culture and this was dependent on ghrelin concentrations. These data indicate that both AG and UAG have antiangiogenic properties at least at the level of endothelial growth, through decreased metabolic activity of the cells or stimulation of apoptosis. D-Lys³-GHRP-6 (inhibitor of GHS-R1a) seems not to be an appropriate antagonist in this experimental condition. Similar effects of these substances on HECa10 cells suggest that they are not mediated by GHS-R1a.     

Nafion/lead nitroprusside nanoparticles modified carbon ceramic electrode as a novel amperometric sensor for l-cysteine

This work describes the electrochemical and electrocatalytic properties of carbon ceramic electrode (CCE) modified with lead nitroprusside (PbNP) nanoparticles as a new electrocatalyst material. The structure of deposited film on the CCE was characterized by energy dispersive X-ray (EDX), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM). The cyclic voltammogram (CV) of the PbNP modified CCE showed two well-defined redox couples due to [Fe(CN)₅NO]³⁻/[Fe(CN)₅NO]²⁻ and Pb^IV/Pb^II redox reactions. The modified electrode showed electrocatalytic activity toward the oxidation of l-cysteine and was used as an amperometric sensor. Also, to reduce the fouling effect of l-cysteine and its oxidation products on the modified electrode, a thin film of Nafion was coated on the electrode surface. The sensor response was linearly changed with l-cysteine concentration in the range of 1 × 10⁻⁶ to 6.72 × 10⁻⁵ mol L⁻¹ with a detection limit (signal/noise ratio [S/N] = 3) of 0.46 μM. The sensor sensitivity was 0.17 μA (μM)⁻¹, and some important advantages such as simple preparation, fast response, good stability, interference-free signals, antifouling properties, and reproducibility of the sensor for amperometric determination of l-cysteine were achieved.     

An electrochemical DNA biosensor based on gold nanorods decorated graphene oxide sheets for sensing platform

A simple electrochemical sensor for sensitive and selective DNA detection was constructed based on gold nanorods (Au NRs) decorated graphene oxide (GO) sheets. The high-quality Au NRs–GO nanocomposite was synthesized via the electrostatic self-assembly technique, which is considered a potential sensing platform. Differential pulse voltammetry was used to monitor the DNA hybridization event using methylene blue as an electrochemical indicator. Under optimal conditions, the peak currents of methylene blue were linear with the logarithm of the concentrations of complementary DNA from 1.0 × 10⁻⁹ to 1.0 × 10⁻¹⁴ M with a detection limit of 3.5 × 10⁻¹⁵ M (signal/noise = 3). Moreover, the prepared electrochemical sensor can effectively distinguish complementary DNA sequences in the presence of a large amount of single-base mismatched DNA (1000:1), indicating that the biosensor has high selectivity.     

Development of neuraminidase detection using gold nanoparticles boron-doped diamond electrodes

Gold nanoparticles-modified boron-doped diamond (AuNPs–BDD) electrodes, which were prepared with a self-assembly deposition of AuNPs at amine-terminated boron-doped diamond, were examined for voltammetric detection of neuraminidase (NA). The detection method was performed based on the difference of electrochemical responses of zanamivir at gold surface before and after the reaction with NA in phosphate buffer solution (PBS, pH 5.5). A linear calibration curve for zanamivir in 0.1 M PBS in the absence of NA was achieved in the concentration range of 1 × 10⁻⁶ to 1 × 10⁻⁵ M (R² = 0.99) with an estimated limit of detection (LOD) of 2.29 × 10⁻⁶ M. Furthermore, using its reaction with 1.00 × 10⁻⁵ M zanamivir, a linear calibration curve of NA can be obtained in the concentration range of 0–12 mU (R² = 0.99) with an estimated LOD of 0.12 mU. High reproducibility was shown with a relative standard deviation (RSD) of 1.14% (n = 30). These performances could be maintained when the detection was performed in mucin matrix. Comparison performed using gold-modified BDD (Au–BDD) electrodes suggested that the good performance of the detection method is due to the stability of the gold particles position at the BDD surface.     

Complexation of curium(III) by adenosine 5′-triphosphate (ATP): A time-resolved laser-induced fluorescence spectroscopy (TRLFS) study

The complex formation of curium(III) with adenosine 5′-triphosphate (ATP) was determined by time-resolved laser-induced fluorescence spectroscopy (TRLFS). The interaction between soluble species of curium(III) with ATP was studied at trace Cm(III) concentrations (3 × 10⁻⁷ M). The concentrations of ATP were varied between 6.0 × 10⁻⁷ and 1.5 × 10⁻⁴ M in the pH range of 1.5-7.0 using 0.154 M NaCl as background electrolyte.Three Cm-ATP species, M_pH_qL_r, could be identified from the fluorescence emission spectra: (i) CmH₂ATP⁺ with a peak maximum at 598.6 nm, (ii) CmHATP with a peak maximum at 600.3 nm, and (iii) CmATP⁻ with a peak maximum at 601.0 nm. The formation constants of these complexes were calculated from TRLFS measurements to be log β₁₂₁ = 16.86 ± 0.09, log β₁₁₁ = 13.23 ± 0.10, and log β₁₀₁ = 8.19 ± 0.16. The hydrated Cm-ATP species showed fluorescence lifetimes between 88 and 96 μs; whereas the CmATP⁻ complex has a significantly longer fluorescence lifetime of 187 ± 7 μs.     

Elevated expression of urotensin II and its receptor in diethylnitrosamine-mediated precancerous lesions in rat liver

Urotensin II (UII) is a somatostatin-like peptide involved in cell proliferation and in tumor biology. To explore the role of liver-derived UII in the pathogenesis of precancerous liver lesions in rat, we investigated the expression of UII and its receptor, UT, in diethylnitrosamine (DEN)-induced precancerous liver lesions and the effects of UII on cell proliferation by hepatic oval cells. Radioimmunoassay, RT-PCR, immunohistochemistry and western blot were used in this study. Compared with untreated controls, rats treated with DEN showed increased UII content by 47.7% in plasma and by 164.9% in liver tissue (all P < 0.01). The expression of UII protein and of both UT mRNA and protein was significantly enhanced in the liver of treated rats. Western blot analysis revealed that the expression of phosphorylated protein kinase C (p-PKC) and phosphorylated extracellular signal-regulated kinase (p-ERK1/2) was increased in the liver of treated animals. Treatment with UII (10⁻¹⁰-10⁻⁶ M) for 24 h significantly increased number of cultured hepatic oval cells (at 10⁻⁹-10⁻⁸ M). However, during the pre-incubation with calphostin C (inhibitor of PKC) or PD98059 (inhibitor of MEK), the proliferation was decreased by 40.1% and 25.4% respectively (both P < 0.05). In DEN-induced precancerous liver lesions, the UII/UT system was up-regulated, which may contribute to the pathogenesis of liver cancer through a PKC- or ERK1/2-dependent pro-mitogenic pathway in an autocrine/paracrine manner.     

Xanthine microsensor based on polypyrrole molecularly imprinted film modified carbon fiber microelectrodes

A molecularly imprinted polymers (MIPs) microsensor was presented as a carbon fiber microelectrode (CFME) coating for specifically recognizing xanthine (Xan). The polymeric film was obtained based on the imprinted procedure of electropolymerization of pyrrole in the presence of the template molecule Xan by cyclic voltammetry, and template was removed by magnetic stirring. Under the optimum conditions, a satisfactory molecularly binding selectivity of Xan was obtained from the MIPs microsensor with an imprinting factor (IF) of 6.63 and a linear response to concentration in certain ranges. The ranges are from 4.0 × 10⁻⁶ to 6.0 × 10⁻⁵ M and from 8.0 × 10⁻⁵ to 2.0 × 10⁻³ M with a detection limit of 2.5 × 10⁻⁷ M. Meanwhile, good stability (relative standard deviation [RSD] = 3.2%, n = 10) and reproducibility (RSD = 2.0%, n = 10) were observed, and recoveries ranging from 96.9 to 102.5% were calculated when applied to Xan determination in real blood serum samples.     

Carbon nanotube-enhanced DNA biosensor for DNA hybridization detection using manganese(II)-Schiff base complex as hybridization indicator

A Mn(II) complex, MnL (L = sodium (E)-3-((1-carboxyethylimino)methyl)-4-hydroxybenzenesulfonate), was synthesized and characterized using elemental analysis and IR spectroscopy. Cyclic voltammetry (CV) and fluorescence spectroscopy were used to investigate the interaction between MnL and salmon sperm DNA. It was revealed that MnL presented high electrochemical activity on glassy carbon electrode (GCE), and it could be intercalated into the double helices of double-stranded DNA (dsDNA). Using MnL as the hybridization indicator, a novel and sensitive electrochemical DNA biosensor based on multiwall carbon nanotubes functionalized with carboxyl groups (MWCNTs-COOH, on which DNA probes were covalently immobilized) was prepared. The target single-stranded DNA (ssDNA) could be quantified ranging from 6.7 × 10⁻¹⁰ M to 8.4 × 10⁻⁹ M with good linearity (r = 0.9922). A detection limit of 1.4 × 10⁻¹⁰ M (3σ, n = 9) was achieved.     

Amperometric detection of cholesterol using an indirect electrochemical oxidation method

The indirect electrochemical oxidation method using bromine species in an organic media for measuring cholesterol was developed. The electrochemical behaviors of cholesterol were examined by cyclic voltammetry in a potential range of −0.5 to 2.0 V (vs. Ag/AgCl/saturated KCl). The polarization curve of the steady-state current in the applied potential range of 0-2.0 V is reported. The obtained kinetic parameters for the catalytic oxidation of cholesterol support the assumption that positive bromine species can be generated from bromine by undergoing two consecutive electrochemical oxidation steps. The positive bromine acts both as electron mediators and as electrocatalysts. Amperometric detection with an anodic current was investigated, and the calibration curve exhibited a linear relationship between the steady-state current and the concentration of cholesterol in the range of 30-200 μM, from which the sensitivity was calculated to be about 0.2 μA/cm²/μM. Moreover, the amperometric current followed Michaelis-Menten’s enzymatic model for cholesterol concentrations in the range of 30 μM to 5 mM, which can be applied for cholesterol rapid detection in processed foods.     

Determination of dopamine in the presence of ascorbic acid using poly(3,5-dihydroxy benzoic acid) film modified electrode

A polymerized film of 3,5-dihydroxy benzoic acid (DBA) was prepared on the surface of a glassy carbon electrode (GCE) in neutral solution by cyclic voltammetry (CV). The poly(DBA) film-coated GCE exhibited excellent electrocatalytic activity toward the oxidation of dopamine (DA). A linear range of 1.0 × 10⁻⁷ to 1.0 × 10⁻⁴ M and a detection limit of 6.0 × 10⁻⁸ M were observed in pH 7.4 phosphate buffer solutions. Moreover, the interference of ascorbic acid (AA) was effectively eliminated. This work provides a simple and easy approach to selective detection of DA in the presence of AA.     

Biosensor based on the biocatalysis of microperoxidase-11 in nanocomposite material of multiwalled carbon nanotubes/room temperature ionic liquid for amperometric determination of hydrogen peroxide

A novel nanocomposite material of multiwalled carbon nanotubes (MWCNTs) and room temperature ionic liquid (RTIL) N-butylpyridinium hexafluorophosphate (BPPF₆) was explored and used to construct a novel microperoxidase-11 (MP-11) biosensor for the determination of hydrogen peroxide (H₂O₂). Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to characterize the performance of the biosensor. Under the optimized experimental conditions, H₂O₂ could be detected in a linear calibration range of 0.5 to 7.0 × 10⁻⁷ mol L⁻¹ with a correlation coefficient of 0.9949 (n = 9) and a detection limit of 3.8 × 10⁻⁹ mol L⁻¹ at 3σ. The modified electrodes displayed excellent electrochemical response, high sensitivity, long-term stability, and good bioactivity and selectivity.     

Electrochemical spectroscopic investigations on the interaction of an ytterbium complex with DNA and their analytical applications such as biosensor

Metal ion-DNA interactions are important in nature, often changing the genetic material's structure and function. A new Yb complex of YbCl₃ (tris(8-hydroxyquinoline-5-sulfonic acid) ytterbium) was synthesized and utilized as an electrochemical indicator for the detection of DNA oligonucleotide based on its interaction with Yb(QS)₃. Cyclic voltammetry (CV) and fluorescence spectroscopy were used to investigate the interaction of Yb(QS)₃ with ds-DNA. It was revealed that Yb(QS)₃ presented an excellent electrochemical activity on glassy carbon electrode (GCE) and could intercalate into the double helix of double-stranded DNA (ds-DNA). The binding mechanism of interaction was elucidated on glassy carbon electrode dipped in DNA solution and DNA modified carbon paste electrode by using differential pulse voltammetry and cyclic voltammetry. The binding ratio between this complex and ds-DNA was calculated to be 1:1. The extent of hybridization was evaluated on the basis of the difference between signals of Yb(QS)₃ with probe DNA before and after hybridization with complementary DNA. With this approach, this DNA could be quantified over the range from 1 × 10⁻⁸ to 1.1 × 10⁻⁷ M. The interaction mode between Yb(QS)₃ and DNA was found to be mainly intercalative interaction. These results were confirmed with fluorescence experiments.