Plasmonic Spectral Detection of Carcinoembryonic Antigen by Preventing the Direct Binding of Rhodamine 6G with Au Nanoparticles

Carcinoembryonic antigen (CEA) was used as a separator to prevent the Rhodamine 6G (R6G)-induced aggregation of colloidal gold nanoparticles. The destroyed aggregation has been monitored by measuring the absorption and resonance light scattering peaks corresponding to the longitudinal surface plasmon resonance (SPR) of the chain-like aggregated gold nanoparticles (AuNPs). It was found that the pre-adding of CEA with different concentrations to the gold colloids before mixing them with R6G could lead to the longitudinal SPR peak decrease and blue shift. By analysing the intensity changing and wavelength shifting of the absorption spectra, CEA could be detected in a linear range from 0.2 to 4 ng/mL, and the limit of detection reaches to 0.1 ng/mL. The sensitivity of the CEA concentration dependent shifting and quenching of the plasmonic absorption and scattering corresponding to the AuNPs aggregation presents a well potential application of biologic spectral sensing.     

Spectral Tuning of Plasmon Resonances of Bimetallic Noble Metal Alloy Nanoparticles Through Compositional Changes

The optical absorption properties of the bimetallic noble metal alloy (viz. Au-Ag, Au-Cu, and Ag-Cu) nanoparticles (NPs) of radii of 10 nm and 20 nm embedded in silica glass have been studied theoretically using a simple model based on the effective medium theory. Our study reveals that the spectra of the above bimetallic alloy NPs exhibit single but composition-sensitive surface plasmon resonance (SPR) peak which indicates the successful formation of alloys. The position of the SPR peak that appeared corresponding to alloy NPs is different from that of the component metals. The study further reveals that the Ag-Au and Au-Cu alloy systems are completely miscible over the entire concentration range but Ag-Cu is miscible up to a certain extent, although, their SPR peak shows a linear shift with molar concentration. It has been further observed that the phase of the Ag-Au alloy system changes with concentration of Au during the alloy formation but no such change is seen in the other two systems. Thus, our study shows that the Ag-Cu system which otherwise does not form alloy in bulk may form alloy in nanoscale with limited miscibility. A shift of the SPR peak positions from ~ 405 to ~ 535 nm for Au-Ag, from ~ 535 to ~ 590 nm for Au-Cu, and from ~ 405 to ~ 436 nm for Ag-Cu NP systems has been observed for different composition of constituent monometals. The compositional changes lead to a spectral tuning of the SPR of the system under studies.

     

Colloidal Au replacement assay for highly sensitive quantification of low molecular weight analytes by surface plasmon resonance

A novel sensing method based on surface plasmon resonance (SPR) was developed for the highly sensitive quantification of low molecular weight (LMW) analytes (colloidal Au replacement assay). Gold nanoparticles (diameter = 20 nm) functionalized with lactosyl-poly(ethylene glycol) (PEG) were prepared and were specifically adsorbed onto a Ricinus communis agglutinin (RCA120)-immobilized SPR sensor chip surface. Subsequent injection of free d-galactose elicited the elution of the preadsorbed lactosyl-PEGylated gold nanoparticles in a manner proportional to the galactose concentration, achieving a substantial and quantitative analysis over a wide range of galactose concentrations (0.1-50 ppm). This method of d-galactose sensing through the substituted elution of preadsorbed nanoparticles from the sensor chip surface would be applicable for the highly sensitive SPR quantification of various LMW analytes, which are known to be difficult to detect by the conventional SPR sensing regime.     

Determination of monoenzyme- and bienzyme-stimulated precipitation by a cuvette-based surface plasmon resonance instrument.

This paper describes the use of a cuvette-based surface plasmon resonance (SPR) instrument to measure biocatalyzed precipitation reactions. Enzyme-modified SPR sensor disk forms the base of a cuvette, in which the substrate solution is added with stirring. The determination of the substrate concentration relies on the measurement of SPR angle shift (Deltatheta(SPR)) induced by the deposition of the insoluble products without involving in any electrochemical reactions. As examples, horseradish peroxidase (HRP)-modified monoenzyme SPR sensor and HRP-glucose oxidase bienzyme-layered sensor are created to determine hydrogen peroxide and glucose via the catalyzed oxidation of 4-chloro-1-naphthol (4-CN). The deposition of the oxidized 4-CN-insoluble products leads to SPR angle shifts, which are linear to H(2)O(2) and glucose in the concentration ranges of 0.067-7.24 x 10(-5) and 0.7-8.3 x 10(-4) mM, respectively. The SPR sensitivities are greater than those of nonelectrochemical quartz crystal microbalance (QCM) (the parallel results in this study) and compare favorable with those of electrochemical QCM and electrochemical SPR methods. This study opens the field for enhanced SPR measurements by using biocatalyzed precipitation as a signal amplification method.     

Sensitivity-enhancement of wavelength-modulation surface plasmon resonance biosensor for human complement factor 4

Sandwich and colloidal Au techniques for enhancing the sensitivity of a wavelength-modulation surface plasmon resonance (SPR) immunosensor are demonstrated by the detection of human complement factor 4 (C4). The design of the wavelength-modulation SPR biosensor is based on fixing the incident angle of light and measuring the reflected intensity of light in the wavelength range spanning 500-900 nm simultaneously. The human C4 had good response in the concentration range 2-20 microg/mL in the direct assay. However, in the sandwich assay, the human C4 had good response in the concentration range 0.2-20 microg/mL and the lowest concentration is 10-fold lower than that obtained by the direct assay. With human C4-Au colloidal conjugate, the human C4 had good response in the concentration range 0.1-20 microg/mL and the lowest concentration is 20-fold lower than that obtained by the direct assay. In the colloidal-Au-enhanced sandwich assay, the human C4 had good response in the concentration range 0.05-5 microg/mL and the lowest concentration is 40-fold lower than that obtained by the direct assay. Under selected experimental conditions, the reproducibility, sensitivity, and reversibility of the enhanced SPR immunoassay are very satisfactory. The results represent potentially significant advantages in the sensitivity of SPR biosensors.     

Application of chromogenic reagents in surface plasmon resonance (SPR)

In this paper, a new simple approach for sensitivity optimization in surface plasmon resonance (SPR) chemosensors based on colorimetric ligands is presented. A new design of SPR sensor with tunable analytical wavelength (lambda(SPR)) was constructed for this purpose, to perform studies on the ligand absorbance spectra related sensitivity enhancement. Unlike commercial SPR sensors which operate at one lambda(SPR), the new device can be used for sensitivity analysis at selected lambda(SPR) in the range 550-750 nm, offering the possibility to identify the highest sensitivity lambda(SPR) in regard to the spectral changes of the selected ligand. Measurements can be easily done in ligand bulk solutions without immobilization steps. Sensitivity enhancement analysis and optimization of lambda(SPR) on chromogenic reagents with hypsochromic shift in their absorption spectra are demonstrated in this contribution. Optimal selection of analytical wavelength, set at the absorbance peak of chromogenic reagent Eriochrome Black T (EBT) was observed to result in up to two times increased SPR sensitivity to Cd(2+) compared to wavelengths selected in other parts of the ligand absorbance spectra, with a limit of detection (LOD) 0.2 ppm. The sensitivity enhancement at optimal lambda(SPR) was observed to be related to increased refractive index (n), drop in extinction coefficient (alpha) and simultaneous hypsochromic shift of the EBT absorbance spectra causing the lambda(SPR) to match the absorbance peak shoulder.     

Continuous flow immunosensor for highly selective and real-time detection of sub-ppb levels of 2-hydroxybiphenyl by using surface plasmon resonance imaging

A biosensor based on surface plasmon resonance (SPR) is developed for the detection of 2-hydroxybiphenyl (HBP). A monoclonal antibody against HBP (abbreviated hereafter as HBP-mAb) is developed and used for the detection of HBP by competitive SPR-based immunoassay and enzyme linked immunosorbent assay (ELISA) methods. A novel HBP-hapten compound, HBP-bovine serum albumin conjugate (HBP-BSA), derived by binding several HBP units with BSA by an aliphatic chain spacer is used in the development of antibody and for the functionalization of immunoprobes. HBP-BSA linked to the Au surface of the SPR sensor chip undergoes inhibitive immunoreaction with HBP-mAb in the presence of free HBP. The SPR-based immunoassay provides a rapid determination (response time: approximately 20 min) of the concentration of HBP in the range of 0.1-1000 ppb (ng/ml). Regeneration of the sensor chip is gained by treating the antibody-anchored SPR sensor chip with a pepsin solution (100 ppm (microg/ml); pH 2.0) for few minutes. The SPR sensor chip is reusable for the detection of HBP for more than 20 cycles with average loss of 0.35% reactivity per regeneration step. HBP concentration is determined as low as 0.1 and 3 ppb using the SPR sensor and ELISA measurements, respectively. The developed SPR sensor for HBP is free from interference by coexisting benzo[a]pyrene (BaP), 2,4-dichlorophenoxyacetic acid (2,4-D) and benz[a]anthracene; SPR angle shift obtained to the flow of HBP is almost same irrespective to the presence or absence of a same concentration of these carcinogenic polycyclic aromatic hydrocarbons together. The SPR sensor for HBP is proved to be applicable in simultaneous detection of HBP and BaP in parallel with another SPR sensor for BaP.     

Size-dependent plasmonic responses of single gold nanoparticles for analysis of biorecognition

We report the use of plasmonic responses of single gold nanoparticles (AuNPs) with various sizes for the analysis of biomolecular recognition. We also describe the relationship between particle size and plasmonic response induced by the binding of receptors and target analytes. To investigate the plasmonic response of AuNPs, Rayleigh light scattering spectra were collected from individual AuNPs using a dark-field microspectroscopy system. Using prostate-specific antigen (PSA) as a model, the linear dynamic range was obtained in the concentration range of 10(-4) to 10 ng/ml, with the smallest detectable concentration at 0.1 pg/ml corresponding to localized surface plasmon resonance (LSPR) λ(max) shifts of approximately 2.95 nm. This result indicates that individual AuNPs can be used for development of a very sensitive, robust, simple, and label-free biosensor to detect protein biomarkers. Furthermore, the method possesses great potential for monitoring other biological interactions.     

Integrated-optic biosensor by electro-optically modulated surface plasmon resonance

We present a new integrated-optic surface plasmon resonance (SPR) biosensor based on electro-optical modulation. The SPR characteristics for the analyte concentration detection can be electro-optically modulated by applying the voltage on the electrodes of the biosensor fabricated on lithium niobate, which is an excellent electro-optic material. Two measurement methods, electro-optically modulated SPR spectral measurement and electro-optically modulated SPR intensity measurement, are demonstrated and their measurands are the SPR wavelength and the output optical intensity, respectively. Human serum albumin is coated on the gold film surface of the proposed biosensor to detect the concentration of beta-blocker, which is a remedy for heart disease. As the applied voltage increases such that the effective index of guided mode rises, the SPR wavelength shifts toward the long wavelength side and the output optical intensity at the wavelength of 632.8 nm diminishes. The linear regression slope of the relation between the measurand and the applied voltage is dependent on the analyte concentration and can be used to determine the concentration variation. Experimental results measured by the electro-optically modulated SPR methods are compared with those measured by the conventional spectral and intensity methods, and the effects of waveguide width on the biosensor performance are discussed.     

Analysis of protein interactions on protein arrays by a novel spectral surface plasmon resonance imaging

We presented a novel surface plasmon resonance (SPR) imaging method for analysis of protein arrays based on a wavelength interrogation-based SPR biosensor. The spectral imaging was performed by the combination of position control and resonance wavelengths calculated from SPR reflectivity spectra. The imaging method was evaluated by analyzing interactions of glutathione S-transferase-fusion proteins with their antibodies. Antigen-antibody interactions were successfully analyzed on glutathione S-transferase-fusion protein arrays by using the spectral imaging method, and the results were confirmed by a parallel analysis using a previously used spectral SPR biosensor based on wavelength interrogation. Specific binding of anti-Rac1 and anti-RhoA to Rac1 and RhoA on the protein arrays was qualitatively and quantitatively analyzed by the spectral SPR imaging. Thus, it was suggested that the novel spectral SPR imaging was a useful tool for the high-throughput analysis of protein-protein interactions on protein arrays.     

Analysis of protein interactions on protein arrays by a wavelength interrogation-based surface plasmon resonance biosensor

We have investigated whether surface plasmon resonance (SPR) sensors based on the wavelength interrogation are able to analyze protein interactions on protein arrays. The spectral SPR sensor was self-constructed and its detection limit, expressed as the minimal refractive index variation, was calculated to be 6.6x10(-5) with the signal fluctuation of 1.0x10(-5). The protein array surface was modified by a mixed thiol monolayer to immobilize proteins. Protein arrays were analyzed by the line-scanning mode of the SPR sensor, which scanned every 100 microm along the central line of array spots and the scanned results were presented by color spectra from blue to red. Glutathione S-transferase (GST)-rac1 caused a concentration-dependent increase of SPR wavelength shift on protein arrays. The surface structure of the protein arrays was analyzed by atomic force microscopy. Specific interactions of antigens with antibodies were analyzed on the protein arrays by using three antibodies and eight proteins. These results suggest that the wavelength interrogation-based SPR sensor can be used as the biosensor for the high-throughput analysis of protein interactions on protein arrays.     

Characterization of a folding intermediate of human carbonic anhydrase II: probing local mobility by electron paramagnetic resonance.

The spin-labeling method was used to investigate human carbonic anhydrase, HCA II, undergoing unfolding induced by guanidine-HCI (Gu-HCI). The spin-probe, N-(2,2,5,5-tetramethyl-1-yloxypyrrolidinyl-3-yl)iodoacetamide, was attached covalently to the single cysteine (position 206) in the enzyme. The electron paramagnetic resonance spectrum of the folded structure showed the characteristic slow motional spectra. When the concentration of the denaturing agent, Gu-HCI, was gradually increased, new spectral components with narrower lines evolved to give complex electron paramagnetic resonance spectra, apparently containing superimposed contributions from several components of different mobility. By a differentiation technique, it was possible to follow the relative increase of the narrow components as a function of Gu-HCI concentration. The amplitude of difference spectra versus Gu-HCI concentration showed two distinct maxima, indicating the existence of a folding intermediate state/structure. The results were found to agree with optical absorption data, which showed similar transitions at the same Gu-HCI concentrations. From line-shape simulations assuming a Brownian diffusion model, the rotational diffusion constants for the spin-label in the folded, folding intermediate, and unfolded structures were determined. The relative abundances of the three conformations in the region 0-4 M Gu-HCI were obtained by least squares fitting of the simulated spectra to the experimental ones. The folding intermediate was found to have a maximum population of 39 +/- 4% at approximately 0.7 M Gu-HCI.     

Imaging surface plasmon resonance system for screening affinity ligands

A surface plasmon resonance (SPR) system for screening ligands for application in affinity chromatography is described. A combinatorial library of 13 ligands was synthesised, characterised and immobilised to agarose beads and gold SPR devices. Binding and elution behaviour and a range of K(AX) values (10(3) to 10(5) M(-1)) were measured against two target proteins, an insulin analogue (MI3) and a recombinant clotting factor (rFVIIa), in order to create a relational database between the traditional chromatographic format and the new SPR screening system. The SPR transducer surface was fabricated with affinity ligands in a two-dimensional, spatially addressable format, which was durable (>100 cycles) and stable over 6 months. The imaging SPR system comprised a direct optical, CCD-based, instrument capable of imaging the change in refractive index created by biochemical interactions and allowed affinity ligands to be evaluated 15-fold faster with 130-fold less target protein than conventional chromatographic methods. The binding and elution data from both the SPR and chromatographic systems for both target proteins were comparable, with the K(AX) value generating a nearly linear correlation (R(2)=0.875) and a slope bias of approximately 2.5+/-0.25-fold higher for the SPR system. The imaging SPR system has proven capable of screening and evaluating affinity ligands for potential use in the recovery of biopharmaceutical proteins.     

Kinetic modeling and determination of reaction constants of Alzheimer's beta-amyloid fibril extension and dissociation using surface plasmon resonance

To establish the kinetic model of the extension and dissociation of beta-amyloid fibrils (f(A)beta) in vitro, we analyzed these reactions using a surface plasmon resonance (SPR) biosensor. Sonicated f(A)beta were immobilized on the surface of the SPR sensor chip as seeds. The SPR signal increased linearly as a function of time after amyloid beta-peptides (Abeta) were injected into the f(A)beta-immobilized chips. The extension of f(A)beta was confirmed by atomic force microscopy. When flow cells were washed with running buffer, the SPR signal decreased with time after the extension reaction. The curve fitting resolved the dissociation reaction into the fast exponential and slow linear decay phases. Kinetic analysis of the effect of Abeta/f(A)beta concentrations on the reaction rate indicated that both the extension reaction and the slow linear phase of the dissociation were consistent with a first-order kinetic model; i.e., the extension/dissociation reactions proceed via consecutive association/dissociation of Abeta onto/from the end of existing fibrils. On the basis of this model, the critical monomer concentration ([M](e)) and the equilibrium association constant (K) were calculated, for the first time, to be 20 nM and 5 x 10(7) M(-1), respectively. Alternatively, [M](e) was directly measured as 200 nM, which may represent the equilibrium between the extension reaction and the fast phase of the dissociation. The SPR biosensor is a useful quantitative tool for the kinetic and thermodynamic study of the molecular mechanisms of f9A)beta formation in vitro.     

Nanoscale fabrication of protein A on self-assembled monolayer and its application to surface plasmon resonance immunosensor

The fabrication of protein A film on self-assembled monolayer was done for the construction of immunosensor using surface plasmon resonance (SPR) measurement. The layer of heterobifunctional linker, N-succinimidyl-3-(2-pyridyldithio)propionate (SPDP) was self-assembled on the gold (Au) surface. Due to the succinimidyl functional group in SPDP to be reacted with amine (NH₂) group of protein A, the covalent immobilization of protein A was subsequently induced toward Au surface. The characteristics of film formation were investigated using SPR with respect to the various concentrations of SPDP and protein A. The optimal concentration for the film formation was found to be 0.1 mg/mL of SPDP and 0.1 mg/mL of protein A, respectively. The surface topography of protein A layer using atomic force microscopy showed that the heteromolecular layer was formed successfully. The antibody, anti-bovine serum albumin (BSA), was immobilized onto protein A layer, and the fabricated antibody layer was applied for the detection of BSA. The extent of BSA–antibody binding was measured using SPR and its lower detection limit of BSA was 100 pM.     

Buried Effects of Surface Plasmon Resonance Modes for Periodic Metal–Dielectric Nanostructures Consisting of Coupled Spherical Metal Nanoparticles with Cylindrical Pore Filled with a Dielectric

We numerically investigate the buried effects of surface plasmon resonance (SPR) modes for the periodic silver-shell nanopearl dimer (PSSND) array and their solid counterparts with different buried depths in a silica substrate by means of finite element method with three-dimensional calculations. The investigated PSSND array is an important novel geometry for plasmonic metal nanoparticles (MNPs), combining the highly attractive nanoscale optical properties of both metallic nanoshell and cylindrical pore filled with a dielectric. Numerical results for SPR modes corresponding to the effects of different illumination wavelengths, absorption spectra, pore–dielectric, electric field components and total field distribution, charge density distribution, and the model of the induced local field or an applied field of the PSSND array are reported as well. It can be found that the buried MNPs with cylindrical pore filled with a dielectric in a substrate exhibit tunable SPR modes corresponding to the bonding and antibonding modes that are not observed for their solid counterparts.     

Camptothecin binds to a synthetic peptide identified by a T7 phage display screen

An analysis of non-biotinylated camptothecin (CPT) binding to the C-20-biotinylated CPT binding peptide NSSQSARR was carried out using two methods, quartz-crystal microbalance (QCM) and surface plasmon resonance (SPR). The peptide was immobilized peptide on a sensor chip and showed a dissociation constant (KD) of approximately 0.1 microM against CPT in QCM and SPR experiments.     

Hybridisation of surface-immobilised single-stranded oligonucleotides and polymer monitored by surface plasmon resonance

We have investigated the hybridisation of thiol-modified single-stranded DNA embedded in a polyacrylamide layer through the technique of surface plasmon resonance (SPR). Kinetic studies were carried out by two different immobilisation methods: (a) SH-ssDNA was firstly attached on gold and the remaining free space was filled with polymer and (b) SH-ssDNA and the polymer was attached onto the surface from the same solution. The immobilisation methods were compared for various concentrations of SH-ssDNA. Hybridisation was dependent on both the immobilisation method and the concentration of the components. The highest hybridisation was obtained when SH-ssDNA and the polymer was immobilised from the same solution at low SH-ssDNA concentration or when high concentrations of oligos were spread onto the surface and the surface was post-treated with polymer. The target response corresponded to a surface coverage of 100+/-15 ng/cm2. The same surface coverage on hybridisation was also obtained when low concentration of SH-ssDNA and polymer was attached onto the surface from the same solution. The non-specific binding of sample DNA was very low at optimal concentrations due to the polymer and the hybridisation was linearly dependent on target concentration.     

Use of a novel micro-fluidic device to create arrays for multiplex analysis of large and small molecular weight compounds by surface plasmon resonance

There is an increasing demand to develop biosensor monitoring devices capable of biomarker profiling for predicting animal adulteration and detecting multiple chemical contaminants or toxins in food produce. Surface plasmon resonance (SPR) biosensors are label free detection systems that monitor the binding of specific biomolecular recognition elements with binding partners. Essential to this technology are the production of biochips where a selected binding partner, antibody, biomarker protein or low molecular weight contaminant, is immobilised. A micro-fluidic immobilisation device allowing the covalent attachment of up to 16 binding partners in a linear array on a single surface has been developed for compatibility with a prototype multiplex SPR analyser. The immobilisation unit and multiplex SPR analyser were respectively evaluated in their ability to be fit-for-purpose for binding partner attachment and detection of high and low molecular weight molecules. The multiplexing capability of the dual technology was assessed using phycotoxin concentration analysis as a model system. The parent compounds of four toxin groups were immobilised within a single chip format and calibration curves were achieved. The chip design and SPR technology allowed the compartmentalisation of the binding interactions for each toxin group offering the added benefit of being able to distinguish between toxin families and perform concentration analysis. This model is particularly contemporary with the current drive to replace biological methods for phycotoxin screening.     

表面等离子体-拉曼散射双模式复合生物芯片

本文提出了复合表面等离子体(SPR)无标记检测及表面增强拉曼散射(SERS)的显微成像技术.证明了双模式SPR-SERS生物芯片的可实施性,即在同一芯片上实现了表面等离子共振和表面增强拉曼显微检测.鉴于双模芯片的高保真性,基于显微技术的高精准、多通道无标记检测技术有望在临床医学检测中得以广泛应用.