Why and how are peptide-lipid interactions utilized for self-defense? Magainins and tachyplesins as archetypes

Animals as well as plants defend themselves against invading pathogenic microorganisms utilizing cationic antimicrobial peptides, which rapidly kill various microbes without exerting toxicity against the host. Physicochemical peptide-lipid interactions provide attractive mechanisms for innate immunity. Many of these peptides form cationic amphipathic secondary structures, typically alpha-helices and beta-sheets, which can selectively interact with anionic bacterial membranes by the aid of electrostatic interactions. Rapid, peptide-induced membrane permeabilization is an effective mechanism of antimicrobial action. This review article summarizes interactions with lipid bilayers of magainins (alpha-helix) and tachyplesins (beta-sheet) discovered in frog skin and horseshoe crab hemolymph, respectively, as archetypes, emphasizing that the mode of interaction is strongly dependent on the physicochemical properties not only of the peptide, but also of the target membrane.     

Interactions of the novel antimicrobial peptide buforin 2 with lipid bilayers: proline as a translocation promoting factor

Buforin 2 is an antimicrobial peptide discovered in the stomach tissue of the Asian toad Bufo bufo gargarizans. The 21-residue peptide with +6 net charge shows antimicrobial activity an order of magnitude higher than that of magainin 2, a membrane-permeabilizing antimicrobial peptide from Xenopus laevis [Park, C. B., Kim, M. S., and Kim, S. C. (1996) Biochem. Biophys. Res. Commun. 218, 408-413]. In this study, we investigated the interactions of buforin 2 with phospholipid bilayers in comparison with magainin 2 to obtain insight into the mechanism of action of buforin 2. Equipotent Trp-substituted peptides were used to fluorometrically monitor peptide-lipid interactions. Circular dichroism measurements showed that buforin 2 selectively bound to liposomes composed of acidic phospholipids, assuming a secondary structure similar to that in trifluoroethanol/water, which is an amphipathic helix distorted around Pro(11) with a flexible N-terminal region [Yi, G. S., Park, C. B., Kim, S. C., and Cheong, C. (1996) FEBS Lett. 398, 87-90]. Magainin 2 induced the leakage of a fluorescent dye entrapped within lipid vesicles coupled to lipid flip-flop. These results have been interpreted as the formation of a peptide-lipid supramolecular complex pore [Matsuzaki, K. (1998) Biochim. Biophys. Acta 1376, 391-400]. Buforin 2 exhibited much weaker membrane permeabilization activity despite its higher antimicrobial activity. In contrast, buforin 2 was more efficiently translocated across lipid bilayers than magainin 2. These results suggested that the ultimate target of buforin 2 is not the membrane but intracellular components. Furthermore, buforin 2 induced no lipid flip-flop, indicating that the mechanism of translocation of buforin 2 is different from that of magainin 2. The role of Pro was investigated by use of a P11A derivative of buforin 2. The derivation caused a change to magainin 2-like secondary structure and membrane behavior. Pro(11) was found to be a very important structural factor for the unique properties of buforin 2.     

Interaction of cationic antimicrobial peptides with model membranes

A series of natural and synthetic cationic antimicrobial peptides from various structural classes, including alpha-helical, beta-sheet, extended, and cyclic, were examined for their ability to interact with model membranes, assessing penetration of phospholipid monolayers and induction of lipid flip-flop, membrane leakiness, and peptide translocation across the bilayer of large unilamellar liposomes, at a range of peptide/lipid ratios. All peptides were able to penetrate into monolayers made with negatively charged phospholipids, but only two interacted weakly with neutral lipids. Peptide-mediated lipid flip-flop generally occurred at peptide concentrations that were 3- to 5-fold lower than those causing leakage of calcein across the membrane, regardless of peptide structure. With the exception of two alpha-helical peptides V681(n) and V25(p,) the extent of peptide-induced calcein release from large unilamellar liposomes was generally low at peptide/lipid molar ratios below 1:50. Peptide translocation across bilayers was found to be higher for the beta-sheet peptide polyphemusin, intermediate for alpha-helical peptides, and low for extended peptides. Overall, whereas all studied cationic antimicrobial peptides interacted with membranes, they were quite heterogeneous in their impact on these membranes.     

Energy-independent translocation of cell-penetrating peptides occurs without formation of pores. A biophysical study with pep-1

Pep-1 is a cell-penetrating peptide (CPP) with the ability to translocate across biological membranes and introduce active proteins inside cells. The uptake mechanism used by this CPP is, as yet, unknown in detail. Previous results show that such a mechanism is endocytosis-independent and suggests that physical-chemical interactions between the peptide and lipid bilayers govern the translocation mechanism. Formation of a transmembrane pore has been proposed but this issue has always remained controversial. In this work the secondary structure of pep-1 in the absence/presence of lipidic bilayers was determined by CD and ATR-FTIR spectroscopies and the occurrence of pore formation was evaluated through electrophysiological measurements with planar lipid membranes and by confocal microscopy using giant unilamellar vesicles. Despite pep-1 hydrophobic domain tendency for amphipathic alpha-helix conformation in the presence of lipidic bilayers, there was no evidence for membrane pores in the presence of pep-1. Furthermore, alterations in membrane permeability only occurred for high peptide/lipid ratios, which induced the complete membrane disintegration. Such observations indicate that electrostatic interactions are of first importance in the pep-1-membrane interactions and show that pores are not formed. A peptide-lipid structure is probably formed during peptide partition, which favours peptide translocation.     

Energy-independent translocation of cell-penetrating peptides occurs without formation of pores. A biophysical study with pep-1

Pep-1 is a cell-penetrating peptide (CPP) with the ability to translocate across biological membranes and introduce active proteins inside cells. The uptake mechanism used by this CPP is, as yet, unknown in detail. Previous results show that such a mechanism is endocytosis-independent and suggests that physical-chemical interactions between the peptide and lipid bilayers govern the translocation mechanism. Formation of a transmembrane pore has been proposed but this issue has always remained controversial. In this work the secondary structure of pep-1 in the absence/presence of lipidic bilayers was determined by CD and ATR-FTIR spectroscopies and the occurrence of pore formation was evaluated through electrophysiological measurements with planar lipid membranes and by confocal microscopy using giant unilamellar vesicles. Despite pep-1 hydrophobic domain tendency for amphipathic α-helix conformation in the presence of lipidic bilayers, there was no evidence for membrane pores in the presence of pep-1. Furthermore, alterations in membrane permeability only occurred for high peptide/lipid ratios, which induced the complete membrane disintegration. Such observations indicate that electrostatic interactions are of first importance in the pep-1-membrane interactions and show that pores are not formed. A peptide-lipid structure is probably formed during peptide partition, which favours peptide translocation.     

Structures and mode of membrane interaction of a short alpha helical lytic peptide and its diastereomer determined by NMR, FTIR, and fluorescence spectroscopy.

The interaction of many lytic cationic antimicrobial peptides with their target cells involves electrostatic interactions, hydrophobic effects, and the formation of amphipathic secondary structures, such as alpha helices or beta sheets. We have shown in previous studies that incorporating approximately 30%d-amino acids into a short alpha helical lytic peptide composed of leucine and lysine preserved the antimicrobial activity of the parent peptide, while the hemolytic activity was abolished. However, the mechanisms underlying the unique structural features induced by incorporating d-amino acids that enable short diastereomeric antimicrobial peptides to preserve membrane binding and lytic capabilities remain unknown. In this study, we analyze in detail the structures of a model amphipathic alpha helical cytolytic peptide KLLLKWLL KLLK-NH2 and its diastereomeric analog and their interactions with zwitterionic and negatively charged membranes. Calculations based on high-resolution NMR experiments in dodecylphosphocholine (DPCho) and sodium dodecyl sulfate (SDS) micelles yield three-dimensional structures of both peptides. Structural analysis reveals that the peptides have an amphipathic organization within both membranes. Specifically, the alpha helical structure of the L-type peptide causes orientation of the hydrophobic and polar amino acids onto separate surfaces, allowing interactions with both the hydrophobic core of the membrane and the polar head group region. Significantly, despite the absence of helical structures, the diastereomer peptide analog exhibits similar segregation between the polar and hydrophobic surfaces. Further insight into the membrane-binding properties of the peptides and their depth of penetration into the lipid bilayer has been obtained through tryptophan quenching experiments using brominated phospholipids and the recently developed lipid/polydiacetylene (PDA) colorimetric assay. The combined NMR, FTIR, fluorescence, and colorimetric studies shed light on the importance of segregation between the positive charges and the hydrophobic moieties on opposite surfaces within the peptides for facilitating membrane binding and disruption, compared to the formation of alpha helical or beta sheet structures.     

Membrane translocation mechanism of the antimicrobial peptide buforin 2

The antimicrobial peptide magainin 2 isolated from the skin of the African clawed frog Xenopus laevis crosses lipid bilayers by transiently forming a peptide-lipid supramolecular complex pore inducing membrane permeabilization and flip-flop of membrane lipids [Matsuzaki, K., Murase, O., Fujii, N., and Miyajima, K. (1996) Biochemistry 35, 11361-11368]. In contrast, the antimicrobial peptide buforin 2 discovered in the stomach tissue of the Asian toad Bufo bufo gargarizans efficiently crosses lipid bilayers without inducing severe membrane permeabilization or lipid flip-flop, and the Pro(11) residue plays a key role in this unique property [Kobayashi, S, Takeshima, K., Park, C. B., Kim, S. C., and Matsuzaki, K. (2000) Biochemistry 39, 8648-8654]. To elucidate the translocation mechanism, the secondary structure and the orientation of the peptide in lipid bilayers as well as the effects of the peptide concentration, the lipid composition, and the cis-trans isomerization of the Pro peptide bond on translocation efficiency were investigated. The translocation efficiencies of F10W-buforin 2 (BF2), P11A-BF2, and F5W-magainin 2 (MG2) across egg yolk L-alpha-phosphatidyl-DL-glycerol (EYPG)/egg yolk L-alpha-phosphatidylcholine (1/1) bilayers were dependent supralinearly on the peptide concentration, suggesting that the translocation mechanisms of these peptides are similar. The incorporation of the negative curvature-inducing lipid egg yolk L-alpha -phosphatidylethanolamine completely suppressed the translocation of BF2, indicating the induction of the positive curvature by BF2 on the membrane is related to the translocation process, similarly to MG2. In pure EYPG, where the repulsion between polycationic BF2 molecules is reduced, membrane permeabilization and coupling lipid flip-flop were clearly observed. Structural studies by use of Fourier transform infrared-polarized attenuated total reflection spectroscopy indicated that BF2 assumed distorted helical structures in EYPG/EYPC bilayers. A BF2 analogue with an alpha-methylproline, which fixed the peptide bond to the trans configuration, translocated similarly to the parent peptide, suggesting the cis-trans isomerization of the Pro peptide bond is not involved in the translocation process. These results indicate that BF2 crosses lipid bilayers via a mechanism similar to that of MG2. The presence of Pro(11) distorts the helix, concentrating basic amino acid residues in a limited amphipathic region, thus destabilizing the pore by enhanced electrostatic repulsion, enabling efficient translocation.     

Insights into buforin II membrane translocation from molecular dynamics simulations

Buforin II is a histone-derived antimicrobial peptide that readily translocates across lipid membranes without causing significant membrane permeabilization. Previous studies showed that mutating the sole proline of buforin II dramatically decreases its translocation. As well, researchers have proposed that the peptide crosses membranes in a cooperative manner by forming transient toroidal pores. This paper reports molecular dynamics simulations designed to investigate the structure of buforin II upon membrane entry and evaluate whether the peptide is able to form toroidal pore structures. These simulations showed a relationship between protein–lipid interactions and increased structural deformations of the buforin N-terminal region promoted by proline. Moreover, simulations with multiple peptides show how buforin II can embed deeply into membranes and potentially form toroidal pores. Together, these simulations provide structural insight into the translocation process for buforin II in addition to providing more general insight into the role proline can play in antimicrobial peptides.     

Membrane perturbation induced by interfacially adsorbed peptides

The structural and energetic characteristics of the interaction between interfacially adsorbed (partially inserted) alpha-helical, amphipathic peptides and the lipid bilayer substrate are studied using a molecular level theory of lipid chain packing in membranes. The peptides are modeled as "amphipathic cylinders" characterized by a well-defined polar angle. Assuming two-dimensional nematic order of the adsorbed peptides, the membrane perturbation free energy is evaluated using a cell-like model; the peptide axes are parallel to the membrane plane. The elastic and interfacial contributions to the perturbation free energy of the "peptide-dressed" membrane are evaluated as a function of: the peptide penetration depth into the bilayer's hydrophobic core, the membrane thickness, the polar angle, and the lipid/peptide ratio. The structural properties calculated include the shape and extent of the distorted (stretched and bent) lipid chains surrounding the adsorbed peptide, and their orientational (C-H) bond order parameter profiles. The changes in bond order parameters attendant upon peptide adsorption are in good agreement with magnetic resonance measurements. Also consistent with experiment, our model predicts that peptide adsorption results in membrane thinning. Our calculations reveal pronounced, membrane-mediated, attractive interactions between the adsorbed peptides, suggesting a possible mechanism for lateral aggregation of membrane-bound peptides. As a special case of interest, we have also investigated completely hydrophobic peptides, for which we find a strong energetic preference for the transmembrane (inserted) orientation over the horizontal (adsorbed) orientation.     

Kinetics of dye efflux and lipid flip-flop induced by delta-lysin in phosphatidylcholine vesicles and the mechanism of graded release by amphipathic, alpha-helical peptides

Delta-lysin is a 26-residue, amphipathic, alpha-helical peptide of bacterial origin. Its specificity is to some extent complementary to that of antimicrobial peptides. Therefore, understanding its mechanism is important for the more general goal of understanding the interaction of amphipathic peptides with membranes. In this article, we show that delta-lysin induces graded efflux of the contents of phosphatidylcholine vesicles. In view of this finding, carboxyfluorescein efflux kinetics were re-examined. In addition, peptide-induced lipid flip-flop was directly measured using fluorescence energy transfer between two lipid fluorophores initially placed on opposite leaflets of the bilayer. Carboxyfluorescein efflux and lipid flip-flop occur with essentially identical rate constants. On the basis of a detailed, quantitative analysis of the kinetics of peptide-vesicle interactions, we conclude that the peptide translocates across the bilayer as a small, transient aggregate, most likely a trimer. Dye efflux and lipid flip-flop occur concomitantly with the transient peptide-induced perturbation of the membrane. The experimental data are interpreted by comparing the predictions of the available models for the mechanism of action of amphipathic alpha-helical peptides. We demonstrate how the combination of the quantitative kinetic analysis, graded efflux, and reversibility of the peptide-vesicle interaction can be used to reject several models for this particular peptide. Two models are compatible with the data, the toroidal pore model and the sinking raft model. On the basis of the small aggregate size, a trimer, the latter appears to be more plausible. Some significant modifications are introduced in the sinking raft model to take into account the new finding of graded dye release. Furthermore, we present an explanation for the phenomenon of graded release in general, which, contrary to all-or-none efflux, has not been well-understood.     

Peptide:lipid ratio and membrane surface charge determine the mechanism of action of the antimicrobial peptide BP100. Conformational and functional studies

The cecropin-melittin hybrid antimicrobial peptide BP100 (H-KKLFKKILKYL-NH2) is selective for Gram-negative bacteria, negatively charged membranes, and weakly hemolytic. We studied BP100 conformational and functional properties upon interaction with large unilamellar vesicles, LUVs, and giant unilamellar vesicles, GUVs, containing variable proportions of phosphatidylcholine (PC) and negatively charged phosphatidylglycerol (PG). CD and NMR spectra showed that upon binding to PG-containing LUVs BP100 acquires α-helical conformation, the helix spanning residues 3–11. Theoretical analyses indicated that the helix is amphipathic and surface-seeking. CD and dynamic light scattering data evinced peptide and/or vesicle aggregation, modulated by peptide:lipid ratio and PG content. BP100 decreased the absolute value of the zeta potential (ζ) of LUVs with low PG contents; for higher PG, binding was analyzed as an ion-exchange process. At high salt, BP100-induced LUVS leakage requires higher peptide concentration, indicating that both electrostatic and hydrophobic interactions contribute to peptide binding. While a gradual release took place at low peptide:lipid ratios, instantaneous loss occurred at high ratios, suggesting vesicle disruption. Optical microscopy of GUVs confirmed BP100-promoted disruption of negatively charged membranes. The mechanism of action of BP100 is determined by both peptide:lipid ratio and negatively charged lipid content. While gradual release results from membrane perturbation by a small number of peptide molecules giving rise to changes in acyl chain packing, lipid clustering (leading to membrane defects), and/or membrane thinning, membrane disruption results from a sequence of events – large-scale peptide and lipid clustering, giving rise to peptide-lipid patches that eventually would leave the membrane in a carpet-like mechanism.     

Membrane-active peptides: Binding,translocation, and flux in lipid vesicles

Recently, new and improved methods have been developed to measure translocation of membrane-active peptides (antimicrobial, cytolytic, and amphipathic cell-penetrating peptides) across lipid bilayer membranes. The hypothesis that translocation of membrane-active peptides across a lipid bilayer is determined by the Gibbs energy of insertion of the peptide into the bilayer is re-examined in the light of new experimental tests. The original hypothesis and its motivation are first revisited, examining some of the specific predictions that it generated, followed by the results of the initial tests. Translocation is understood as requiring two previous steps: binding and insertion in the membrane. The problem of peptide binding to membranes, its prediction, measurement, and calculation are addressed. Particular attention is given to understanding the reason for the need for amphipathic structures in the function of membrane-active peptides. Insertion into the membrane is then examined. Hydrophobicity scales are compared, and their influence on calculations is discussed. The relation between translocation and graded or all-or-none peptide-induced flux from or into lipid vesicles is also considered. Finally, the most recent work on translocation is examined, both experimental and from molecular dynamics simulations. This article is part of a Special Issue entitled: Interfacially Active Peptides and Proteins. Guest Editors: William C. Wimley and Kalina Hristova.     

Enhanced translocation of amphiphilic peptides across membranes by transmembrane proteins

Cell membranes are phospholipid bilayers with a large number of embedded transmembrane proteins. Some of these proteins, such as scramblases, have properties that facilitate lipid flip-flop from one membrane leaflet to another. Scramblases and similar transmembrane proteins could also affect the translocation of other amphiphilic molecules, including cell-penetrating or antimicrobial peptides. We studied the effect of transmembrane proteins on the translocation of amphiphilic peptides through the membrane. Using two very different models, we consistently demonstrate that transmembrane proteins with a hydrophilic patch enhance the translocation of amphiphilic peptides by stabilizing the peptide in the membrane. Moreover, there is an optimum amphiphilicity because the peptide could become overstabilized in the transmembrane state, in which the peptide-protein dissociation is hampered, limiting the peptide translocation. The presence of scramblases and other proteins with similar properties could be exploited for more efficient transport into cells. The described principles could also be utilized in the design of a drug-delivery system by the addition of a translocation-enhancing peptide that would integrate into the membrane.     

Resolving the kinetics of lipid, protein and peptide diffusion in membranes

Recent developments in the understanding of molecular diffusion phenomena in membranes are reviewed. Both model bilayers and biological membranes are considered in respect of lateral diffusion, rotational diffusion and transverse diffusion (flip-flop). For model systems, particular attention is paid to recent data obtained using surface-specific techniques such as sum frequency generation vibrational spectroscopy on supported lipid bilayers, and fluorescence correlation spectroscopy on giant unilamellar vesicles, both of which have yielded new insights into the intrinsic rates of diffusion and the energetic barriers to processes such as lipid flip-flop. Advances in single-molecule and many-molecule fluorescence methodologies have enabled the observation of processes such as anomalous diffusion for some membrane species in biological membranes. These are discussed in terms of new models for the role of membrane interactions with the cytoskeleton, the effects of molecular crowding in membranes, and the formation of lipid rafts. The diffusion of peptides, proteins and lipids is considered, particularly in relation to the means by which antimicrobial peptide activity may be rationalized in terms of membrane poration and lipid flip-flop.     

S4(13)-PV cell-penetrating peptide induces physical and morphological changes in membrane-mimetic lipid systems and cell membranes: implications for cell internalization

The present work aims to gain insights into the role of peptide-lipid interactions in the mechanisms of cellular internalization and endosomal escape of the S4(13)-PV cell-penetrating peptide, which has been successfully used in our laboratory as a nucleic acid delivery system. A S4(13)-PV analogue, S4(13)-PVscr, displaying a scrambled amino acid sequence, deficient cell internalization and drug delivery inability, was used in this study for comparative purposes. Differential scanning calorimetry, fluorescence polarization and X-ray diffraction at small and wide angles techniques showed that both peptides interacted with anionic membranes composed of phosphatidylglycerol or a mixture of this lipid with phosphatidylethanolamine, increasing the lipid order, shifting the phase transition to higher temperatures and raising the correlation length between the bilayers. However, S4(13)-PVscr, in contrast to the wild-type peptide, did not promote lipid domain segregation and induced the formation of an inverted hexagonal lipid phase instead of a cubic phase in the lipid systems assayed. Electron microscopy showed that, as opposed to S4(13)-PVscr, the wild-type peptide induced the formation of a non-lamellar organization in membranes of HeLa cells. We concluded that lateral phase separation and destabilization of membrane lamellar structure without compromising membrane integrity are on the basis of the lipid-driven and receptor-independent mechanism of cell entry of S4(13)-PV peptide. Overall, our results can contribute to a better understanding of the role of peptide-lipid interactions in the mechanisms of cell-penetrating peptide membrane translocation, helping in the future design of more efficient cell-penetrating peptide-based drug delivery systems.     

Lipid involvement in protein translocation in Escherichia coli

Signal peptides play an essential role in protein translocation. This review summarizes the current knowledge of the structure of signal peptides and signal peptide-lipid interactions and addresses the possibility that signal peptide-lipid interactions initiate membrane translocation of precursor proteins. A new model for protein translocation in Escherichia coli is proposed, which includes as central features conformational changes of the signal peptide and signal-peptide-induced local changes in membrane organization (non-bilayer lipids).     

Resolving the kinetics of lipid,protein and peptide diffusion in membranes

Abstract

Recent developments in the understanding of molecular diffusion phenomena in membranes are reviewed. Both model bilayers and biological membranes are considered in respect of lateral diffusion, rotational diffusion and transverse diffusion (flip-flop). For model systems, particular attention is paid to recent data obtained using surface-specific techniques such as sum frequency generation vibrational spectroscopy on supported lipid bilayers, and fluorescence correlation spectroscopy on giant unilamellar vesicles, both of which have yielded new insights into the intrinsic rates of diffusion and the energetic barriers to processes such as lipid flip-flop. Advances in single-molecule and many-molecule fluorescence methodologies have enabled the observation of processes such as anomalous diffusion for some membrane species in biological membranes. These are discussed in terms of new models for the role of membrane interactions with the cytoskeleton, the effects of molecular crowding in membranes, and the formation of lipid rafts. The diffusion of peptides, proteins and lipids is considered, particularly in relation to the means by which antimicrobial peptide activity may be rationalized in terms of membrane poration and lipid flip-flop.     

The structure of the antimicrobial peptide Ac-RRWWRF-NH2 bound to micelles and its interactions with phospholipid bilayers.

The hexapeptide Ac-RRWWRF-NH2 has earlier been identified as a potent antimicrobial peptide by screening synthetic combinatorial hexapeptide libraries. In this study, it was found that this peptide had a large influence on the thermotropic phase behavior of model membranes containing the negatively charged headgroup phosphatidylglycerol, a major component of bacterial membranes. In contrast, differential scanning calorimetry showed that it had little effect on model membranes containing the zwitterionic phosphatidylcholine headgroup, the main component of erythrocyte membranes. This behavior is consistent with its biological activity and with its affinity to these membranes as determined by titration calorimetry, implying that peptide-lipid interactions play an important role in this process. The structure of this peptide bound to membrane-mimetic sodium dodecyl sulfate (SDS) and dodecylphosphocholine micelles has been determined using conventional two-dimensional nuclear magnetic resonance methods. It forms a marked amphipathic structure in SDS with its hydrophobic residues on one side of the structure and with the positively charged residues on the other side. This amphipathic structure may allow this peptide to penetrate deeper into the interfacial region of negatively charged membranes, leading to local membrane destabilization. Knowledge about the importance of electrostatic interactions of Arg and the role of Trp residues as a membrane interface anchor will provide insight into the future design of potent antimicrobial peptidomimetics.     

Investigations of antimicrobial peptides in planar film systems

Planar systems--monolayers and films--constitute a useful platform for studying membrane-active peptides. Here, we summarize varied approaches for studying peptide organization and peptide-lipid interactions at the air/water interface, and focus on three representative antimicrobial membrane--associated peptides-alamethicin, gramicidin, and valinomycin. Experimental data, specifically surface pressure/area isotherms and Brewster angle microscopy images, provided information on peptide association and the effects of the lipid monolayers on peptide surface organization. In general, film analysis emphasized the effects of lipid layers in promoting peptide association and aggregation at the air/water interface. Importantly, the data demonstrated that in many cases peptide domains are phase-separated within the phospholipid monolayers, suggesting that this behavior contributes to the biological actions of membrane-active antimicrobial peptides.     

Lipid composition regulates the conformation and insertion of the antimicrobial peptide maculatin 1.1

Antimicrobial peptides interact with cell membranes and their selectivity is contingent on the nature of the constituent lipids. Eukaryotic and bacterial membranes are comprised of different proportions of a range of lipid species with different physical properties. Hence, characterisation of antimicrobial peptides with respect to the magnitude of their interactions with model membranes of different lipid types is needed. Maculatin 1.1 is a short antimicrobial peptide secreted from the skin of several Australian tree-frog species. Circular dichroism spectroscopy (CD) was used to explore the interaction of maculatin 1.1 with a wide range of model membrane systems of different head group and acyl chain characteristics. For neutral phosphatidylcholine (PC), unlike anionic phospholipids, the magnitude of the peptide interactions was dependent on the length and degree of saturation of the constituent acyl chains. Oriented circular dichroism (OCD) data indicated that helical structure was likely promoted by peptide insertion into the hydrophobic core of PC bilayers. The addition of cholesterol (30% mol/mol) tended to decrease the membrane interaction of maculatin 1.1. Anionic lipids locked maculatin 1.1 via electrostatic interactions onto the surface of oriented bilayers as seen in OCD spectra. Furthermore, increasing the membrane curvature by reducing the vesicle radii only slightly reduced the proportion of helical structure in all systems by approximately 10%. The peptide-lipid interaction was strongly dependent on both the lipid chain length and head group, which highlights the importance of the lipid composition used to mimic different cell types. This article is part of a Special Issue entitled: Membrane protein structure and function.