Ester hydrolyses in reversed micelles using lipase

Lipases are enzymes which require a favourable reaction system for efficient catalysis of their hydrophobic substrates and reversed micellar environment is one such medium which offers many advantages. Hydrolytic studies of esters of paranitrophenol and glycerol using imidazole and four fungal lipases are studied in AOT/isooctane reversed micelles. The effect of water and surfactant concentration on the hydrolysis of rice bran oil is investigated and the overall potential of the reversed micellar system for hydrolytic reactions is assessed.     

Lipase reaction in AOT-isooctane reversed micelles: effect of water on equilibria

The effect of water on equilibria for hydrolytic reaction in reversed micelles has been investigated using lipase as a model enzyme. The effect of water on equilibria has been ignored for hydrolase reactions in an aqueous phase. In a reversed micellar system, however, the equilibrium of the lipase reaction was changed when water was added during the hydrolytic reaction. Furthermore, equilibrium fractional conversion is affected by the initial water concentration, being shifted to higher values with higher water concentrations, with other reaction conditions being held constant, indicating that the reaction should be regarded as a two-substrate process. Equations corresponding to a two-substrate, second-order reversible model are derived and used for further analysis. The progress curves predicted from the rate equations agree very well with the experimental results under various reaction conditions. The values of the molar ratio of water to surfactant (R) which maximize the initial reaction rate and maximum fractional conversion is predictable from the derived rate equations and the resulting relationship between R and the kinetic constants.     

Kinetic theory of enzymatic reactions in reversed micellar systems. Application of the pseudophase approach for partitioning substrates

A kinetic theory is proposed for enzymatic reactions proceeding in reversed micellar systems in organic solvents, and involving substrates capable of partitioning among all pseudophases of the micellar system i.e. aqueous cores of reversed micelles, micellar membranes and organic solvent. The theory permits determination of true (i.e. with reference to the aqueous phase, where solubilized enzyme is localized) catalytic parameters of the enzyme, provided partition coefficients of the substrate between different phases are known. The validity of the kinetic theory was verified by the example of oxidation of aliphatic alcohols catalyzed by horse liver alcohol dehydrogenase in the system of reversed sodium bis(2-ethylhexyl)sulfosuccinate (AOT, aerosol OT) micelles in octane. In order to determine partition coefficients of alcohols between phases of the micellar system, flow microcalorimetry technique was used. It was shown that in the first approximation, the partition coefficient of the substrate in a simple biphasic system consisting of water and corresponding organic solvent can be used as an estimate for the partition coefficient of the substrate between aqueous and organic solvent phases of the micellar system. True values of the Michaelis constant of alcohols in the micellar system, determined using suggested approach, are equal to those obtained in aqueous solution and differ from apparent values referred to the total volume of the system. The results clearly show that the previously reported shift in the substrate specificity of HLADH, observed on changing from aqueous solution to the system of reversed aerosol OT micelles in octane, is apparent and can be explained on the basis of partitioning effects of alcoholic substrates between phases of the micellar system.     

Affinity extraction of proteins with a reversed micellar system composed of Cibacron Blue-modified lecithin

Crude soybean lecithin was used as a novel surfactant to form reversed micelles in n-hexane. Cibacron Blue F-3GA (CB) was directly immobilized to the reversed micelles by a two-phase reaction. The reversed micellar system without CB showed low solubilizing capacity for low molecular weight proteins, lysozyme, and cytochrome c due to the weak electrostatic interactions. The introduction of CB significantly increased the solubilization of lysozyme because of its affinity binding to CB but showed no effect on the solubilization of cytochrome c since it did not bind to CB. Although bovine serum albumin had an affinity for CB, it was not extracted to the reversed micelles containing CB because its high molecular weight resulted in a significant steric hindrance effect. Thus the reversed micellar system had a high selectivity resulting from both biospecific and steric hindrance effects. The extraction yield of lysozyme decreased significantly with increasing ionic strength. Therefore, the back extraction of lysozyme was carried out using a stripping solution with an ionic strength of 0.865 mol/L. The overall recovery yield of lysozyme after back extraction could be increased to 87% by stripping for 2 h. The recovered lysozyme exhibited an activity equivalent to native lysozyme, and its secondary structure was also unchanged.     

Characterization of lipase in reversed micelles formulated with cibacron blue F-3GA modified span 85

Sorbitan trioleate (Span 85) modified by Cibacron Blue F-3GA (CB) was prepared and used as an affinity surfactant to formulate a reversed micellar system for Candida rugosa lipase (CRL) solubilization. The system was characterized and evaluated by employing CRL-catalyzed hydrolysis of olive oil as a model reaction. The micellar hydrodynamic radius results reflected, to some extent, the redistribution of surfactant and water after enzyme addition, and the correlation between surfactant formulation, water content (W0), micellar size, and enzyme activity. An adequate modification density of CB was found to be important for the reversed micelles to retain enough hydration capacity and achieve high enzyme activity. Compared with the results in AOT-based reversed micelles, CRL in this micellar system exhibited a different activity behavior versus W0. The optimal pH and temperature of the encapsulated lipase remained unchanged, but the apparent activity was significantly higher than that of the native enzyme in bulk solution. Kinetic studies indicated that the encapsulated lipase in the reversed micelles of CB-formulated Span 85 followed the Michaelis-Menten equation. The Michaelis constant was found to decrease with increasing surfactant concentration, suggesting an increase of the enzyme affinity for the substrate. Stability of the lipase in the reversed micelles was negatively correlated to W0.     

Thermobarostability of alpha-chymotrypsin in reversed micelles of aerosol OT in octane solvated by water-glycerol mixtures

Thermostability of alpha-chymotrypsin at normal pressure in reversed micelles depends on both an effective surfactant solvation degree and glycerol content in the system. The difference in alpha-chymotrypsin stability in reversed micelles at various glycerol concentrations [up to 60% (v/v)] was more pronounced at high surfactant degrees of solvation, R >/= 16. After a 1-h incubation at 40 degrees C in "aqueous" reversed micelles (in the absence of glycerol), alpha-chymotrypsin retained only 1% of initial catalytic activity and 10, 22, 59, and 48% residual activity in glycerol-solvated micelles with 20, 30, 50, and 60% (v/v) glycerol, respectively. The explanation of the observed effects is given in the frames of micellar matrix structural order increasing in the presence of glycerol as a water-miscible cosolvent that leads to the decreasing mobility of the alpha-chymotrypsin molecule and, thus the increase of its stability. It was found that glycerol or hydrostatic pressure could be used to stabilize alpha-chymotrypsin in reversed micelles; a lower pressure is necessary to reach a given level of enzyme stability in the presence of glycerol.     

Formation of biocompatible reversed micellar systems using phospholipids

Formation of reversed micellar systems using biocompatible components was revealed by a significant increase of water content in the organic phase. Soybean lecithin (SL), which is a mixture of different phospholipids, and phosphatidylcholine (PC) purified from soybean were used as the amphiphilic molecule. Fatty acid and fatty acid ethyl esters were used as the organic solvent. Reversed micelles were formed in the following combinations of (amphiphilic molecule)/(organic solvent): SL/ethyl caproate, SL/ethyl oleate, SL/ethyl linoleate, PC/ethyl caproate, and PC/oleic acid. Characterization of the micelles using small angle X-ray scattering analysis was presented. Reversed micelles formed in SL/ethyl caproate, SL/ethyl oleate, and PC/ethyl caproate systems were spherical. Their radius of gyration was about 40? when the water concentration in the organic phase was maximal. Maximal water concentrations in SL/ethyl caproate and PC/ethyl caproate reversed micellar systems decreased with increasing salt concentration in the aqueous phase. Micelle sizes also decreased with increased salt concentration. The extraction of protein cytochrome c using the reversed micellar system was demonstrated. Application of these reversed micellar systems will expand to pharmaceutical and food industries.     

Cutinase-AOT interactions in reverse micelles: the effect of 1-hexanol

Cutinase encapsulated in dioctyl sulfosuccinate reverse micelles displays very low stability, undergoing fast denaturation due to an anchoring at the micellar interface. The denaturation process and the structure of the reverse micelle were characterized using biophysical techniques. The kinetics of denaturation observed from fluorescence match the increase of the hydrodynamic radius of reverse micelles. Denaturation in reverse micelles is mainly the unfolding of the three-dimensional structure since the decrease in the circular dichroism ellipticity in the far-UV range is very small. The process is accompanied by an increase in the steady-state anisotropy, as opposed to what happens for denaturation in aqueous solution.Since 1-hexanol used as co-surfactant in dioctyl sulfosuccinate reverse micelles slows or even prevents cutinase denaturation, its effect on cutinase conformation and on the size of reverse micelles was analyzed. When 1-hexanol is present, cutinase is encapsulated in a large reverse micelle, as deduced from dynamic light scattering. The large reverse micelle filled with cutinase was built from the fusion of reverse micelles according to a pseudo-unimolecular process ranging in time from a few minutes to 2h depending on the reverse micellar concentration. This slow equilibrium driven by the encapsulated cutinase has not been reported previously. The encapsulation of cutinase in dioctyl sulfosuccinate reverse micelles establishes a completely new equilibrium characterized by a bimodal population of empty and filled reverse micelles, whose characteristics depend greatly on the interfacial characteristics, that is, on the absence or presence of 1-hexanol.     

Spectroscopic properties of horse liver alcohol dehydrogenase in reversed micellar solutions

Catalytic and spectroscopic properties of alcohol dehydrogenase from horse liver, incorporated in reversed micellar media, have been studied. Two different reversed micellar systems have been used, one containing an anionic [sodium bis(2-ethylhexyl)sulfosuccinate, AOT], the other containing a cationic (cetyltrimethylammonium bromide, CTAB) surfactant. With 1-hexanol as substrate the turnover number of the enzyme in AOT-reversed micelles is strongly dependent on the water content of the system. At low wo ([H2O]/[surfactant]) (wo less than 20) no enzymatic activity can be detected whereas at high wo (wo = 40) the turnover is only slightly lower than in aqueous solution. In CTAB-reversed micelles the dependence of the turnover number on wo is much less. The enzymatic activity is in this case significantly lower than in aqueous solution and increases only slightly with an increasing water content of the reversed micelles. Possible interactions of the protein with the surfactant interfaces in the reversed micellar media were studied via circular dichroism and fluorescence measurements. From the circular dichroism of the protein backbone it is observed that the protein secondary structure is not significantly affected upon incorporation in the reversed micelles since the far-ultraviolet spectrum is not altered. Results from time-resolved fluorescence anisotropy experiments indicate that, especially in AOT-reversed micelles, interactions between the protein and the surfactant interface are largely electrostatic in nature, as evident from the dependence on the pH of the buffer used. In CTAB-reversed micellar solutions such interactions appear to be much less pronounced than in AOT.     

Dynamic light scattering of cutinase in AOT reverse micelles

The fungal lipolytic enzyme cutinase, incorporated into sodium bis-(2ethylhexyl) sulfosuccinate reversed micelles has been investigated using dynamic light scattering. The reversed micelles form spontaneously when water is added to a solution of sodium bis-(2ethylhexyl) sulfosuccinate in isooctane. When an enzyme is previously dissolved in the water before its addition to the organic phase, the enzyme will be incorporated into the micelles. Enzyme encapsulation in reversed micelles can be advantageous namely to the conversion of water insoluble substrates and to carry out synthesis reactions. However protein unfolding occurs in several systems as for cutinase in sodium bis-(2ethylhexyl) sulfosuccinate reversed micelles. Dynamic light scattering measurements of sodium bis-(2ethylhexyl) sulfosuccinate reversed micelles with and without cutinase were taken at different water to surfactant ratios. The results indicate that cutinase was attached to the micellar wall and that might cause cutinase unfolding. The interactions between cutinase and the bis-(2ethylhexyl) sulfosuccinate interface are probably the driving force for cutinase unfolding at room temperature. Twenty-four hours after encapsulation, when cutinase is unfolded, a bimodal distribution was clearly observed. The radii of reversed micelles with unfolded cutinase were determined and found to be considerable larger than the radii of the empty reversed micelles. The majority of the reversed micelles were empty (90-96% of mass) and the remainder (4-10%) containing unfolded cutinase were larger by 26-89 A.     

Deactivation and conformational changes of cutinase in reverse micelles

Deactivation data and fluorescence intensity changes were used to probe functional and structural stability of cutinase in reverse micelles. A fast deactivation of cutinase in anionic (AOT) reverse micelles occurs due to a reversible denaturation process. The deactivation and denaturation of cutinase is slower in small cationic (CTAB/1-hexanol) reverse micelles and does not occur when the size of the cationic reverse micellar water-pool is larger than cutinase. In both systems, activity loss and denaturation are coupled processes showing the same trend with time. Denaturation is probably caused by the interaction between the enzyme and the surfactant interface of the reversed micelle. When the size of the empty reversed micelle water-pool is smaller than cutinase (at W0 5, with W0 being the water:surfactant concentration ratio) a three-state model describes denaturation and deactivation with an intermediate conformational state existing on the path from native to denaturated cutinase. This intermediate was clearly detected by an increase in activity and shows only minor conformational changes relative to the native state. At W0 20, the size of the empty water-pool was larger than cutinase and the data was well described by a two-state model for both anionic and cationic reverse micelles. For AOT reverse micelles at W0 20, the intermediate state became a transient state and the deactivation and denaturation were described by a two-state model in which only native and denaturated cutinase were present. For CTAB/1-hexanol reverse micelles at W0 20, the native cutinase was in equilibrium with an intermediate state, which did not suffer denaturation. 1-Hexanol showed a stabilizing effect on cutinase in reverse micelles, contributing to the higher stabilities observed in the cationic CTAB/1-hexanol reverse micelles. Copyright 1998 John Wiley & Sons, Inc.     

Optimization of Peroxidase-Catalyzed Oxidation of Luminol in Reversed Micelles of Surfactants in Octane

Luminol oxidation in the Aerosol OT (AOT) reversed micelles in octane catalyzed by horseradish peroxidase (HRP), or its conjugate with Cortisol (HRP-COR), was optimized. The chemiluminescence intensity during luminol oxidation was strongly dependent on the method of preparation of the reaction mixture and the addition of Triton X-45, cyclohexanol and the chemiluminescence “enhancer”, p-iodophenol, into the micellar system. Five procedures for the preparation of the reaction mixture were compared. The maximum chemiluminescence was observed in the micellar system containing all the reaction components excluding a biocatalyst, addition of which into the system started the reaction. Triton X-45, cyclohexanol or p-iodophenol added to the micellar system enhanced significantly the chemiluminescence intensity. The “enhancing” action of p-iodophenol in AOT reversed micelles was 10-fold less than in an aqueous medium.     

Enzyme kinetics in reversed micelles. 2. Behaviour of enoate reductase

Enoate reductase (EC 1.3.1.31) can stereospecifically reduce a variety of alpha,beta-unsaturated carboxylates. Its use was extended to apolar media by incorporating the enzyme into a reversed micellar medium. The kinetics of the enzyme in such a medium have been investigated using 2-methylbutenoic acid as substrate and NADH as a cofactor and compared with the reaction rates in aqueous solution. In aqueous solution the enzyme obeys a ping pong mechanism [Bühler et al. (1982) Hoppe-Seyler's Z. Physiol. Chem 363, 609-625]. In 50 mM Hepes pH = 7.0 with ionic strength of 0.05 M the Michaelis constants for NADH and 2-methylbutenoic acid are 20 microM and 6.0 mM respectively. In reversed micelles the kinetics of the reaction (Michaelis constant, maximum velocity as well as inhibitory effects) were markedly different. The rate of the enzymatic reaction of enoate reductase was studied using various concentrations of 2-methylbutenoic acid and various NADH concentrations. In reversed micelles composed of the anionic detergent sodium di(ethylhexyl)sulphosuccinate, the enzymatic reaction deviates substantially from the values in aqueous solution. Using our model (see preceding paper in this issue of the journal), all kinetics could be explained as evolving from enclosure in reversed micelles without any change in the intrinsic rate parameters of the enzyme. So the enzyme itself is unaffected by incorporation in reversed micelles, but the rate of intermicellar exchange as well as the microheterogeneity of the medium, resulting in very high local concentrations of the substrate, are the most important factors altering the reaction pattern. The effect of the composition of the reversed micellar medium was also investigated using either a nonionic or a cationic surfactant. In these solutions too, exchange and microheterogeneity of the medium proved to be the most important parameters influencing the enzymatic reaction. In all reversed micellar solutions inhibition by the enoate was observed at an overall concentration of 0.5-5 mM, implying that a concentration of substrate equal to the Km value in aqueous solution may already cause inhibition in reversed micelles. At this level no inhibition by NADH was observed. The microheterogeneity of the medium also explains this inhibition of the enzyme at relatively low 2-methylbutenoic acid concentrations.     

1H NMR structural characterization of the cytochrome c modifications in a micellar environment

The interaction of cytochrome c with micelles of sodium dodecyl sulfate was studied by proton NMR spectroscopy. The protein/micelles ratio was found to be crucial in controlling the extent of the conformational changes in the heme crevice. Over a range of ratios between 1:30 and 1:60, the NMR spectra of the ferric form display no paramagnetic signals due to a moderately fast exchange between intermediate species on the NMR time scale. This is consistent with an interconversion of bis-histidine derivatives (His18-Fe-His26 and His18-Fe-His33). Further addition of micelles induces a high-spin species that is proposed to involve pentacoordinated iron. The resulting free binding site, also encountered in the ferrous form, is used to complex exogenous ligands such as cyanide or carbon monoxide. Attribution of the heme methyls was performed by means of exchange spectroscopy through ligand exchange or electron transfer. The heme methyl shift pattern of the micellar cyanocytochrome in the ferric low spin form is different from the pattern of both the native and the cyanide cytochrome c adduct, in the absence of micelles, reflecting a complete change of the heme electronic structure. Analysis of the electron self-exchange reaction between the two redox states of the micellar cyanocytochrome c yields a rate constant of 2.4 x 10(4) M(-1) s(-1) at 298 K, which is surprisingly close to the value observed in the native protein.     

Triplet-state kinetics of Zn-porphyrin cytochrome c in micellar media. Measurement of intermicellar exchange rates

The interactions of protein molecules with surfactant assemblies in aqueous and hydrocarbon media have been studied via the triplet-state kinetics of Zn-porphyrin cytochrome c in solutions containing an anionic [sodium bis(2-ethylhexyl)sulfosuccinate, AOT] or a cationic (cetyltrimethylammonium bromide, CTAB) surfactant. In aqueous solution, the observed triplet state decay is single exponential with a lifetime of 8 ms. In aqueous solutions of AOT and in AOT-reversed micellar solutions, biexponential triplet state decays were observed, indicating that interactions between the surfactant and the protein occur, resulting in a change in protein conformation near the porphyrin ring. In CTAB-reversed micellar solutions, quenching of the Zn-porphyrin cytochrome c triplet state by ferricyanide and methyl viologen was studied. Because the quenching is exchange-limited under the conditions used, the exchange rate constants for the water pools can be obtained from these experiments. The observed exchange rate constants are in the range (1-5) x 10(7) M-1 S-1, depending on the water content of the reversed micelles and on the type of quencher used. These values are three orders of magnitude lower than the calculated collision rate of the reversed micelles.     

A procedure for the joint evaluation of substrate partitioning and kinetic parameters for reactions catalyzed by enzymes in reverse micellar solutions. I. Hydrolysis of 2-naphthyl acetate catalyzed by lipase in sodium 1,4-bis(2-ethylhexyl) sulphosuccinate (AOT)/buffer/heptane

A simple method useful for the joint evaluation of substrate partitioning and kinetic parameters for reactions catalyzed by enzymes entrapped in reverse micelles is proposed. The method is applied to the hydrolysis of 2-naphthyl acetate (2-NA) catalyzed by lipase in sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (AOT)/buffer/heptane reverse micellar solutions. In the presence of micelles, the relationship between the initial reaction rate and the analytical concentration of 2-NA was dependent on AOT concentration at a constant W ([water]/[AOT]) value. The dependence of the initial reaction rate profiles with [AOT] was analyzed according with the method proposed to obtain the partition constant of 2-NA between the micelles and the external solvent, Kp. A value of Kp = 2.7 L mol(-1) was obtained irrespective of the water content of the micelles (W from 5 to 20). The catalytic rate constant kcat in the micellar solutions was independent of [AOT] but slightly decreased with an increase in W from 2 x 10(-6) mol g(-1) s(-1) at W = 5 to 1.2 x 10(-6) mol g(-1) s(-1) at W = 20. The apparent Michaelis constant determined in terms of the analytical concentration of 2-NA increased with [AOT] at a given W and moderately decreased with W at a fixed [AOT]. The increase with [AOT] is accounted for by considering the partitioning of the substrate. After correction for the partitioning of 2-NA values of (Km)corr were obtained as 3.9 x 10(-3) mol L(-1) (W = 5), 4.6 x 10(-3) mol L(-1) (W = 10), 2.3 x 10(-3) mol L(-1) (W = 15), and 1.7 x 10(-3) mol L(-1) (W = 20). The rate parameters in the aqueous phase in the absence of micelles, were obtained as (kcat)aq = 7.9 x 10(-6) mol g(-1) s(-1) and (Km)aq = 2.5 x 10(-3) mol L(-1). In order to compare the efficiency of the enzyme in the micellar solution with that in aqueous phase, the values of (Km)corr were in turn corrected to take into account differences in the substrate activity, obtaining so a set of (Km)*corr values. The efficiency of the enzyme in the micellar solution, defined as the ratio, kcat/(Km)*corr, was found to be higher than in the aqueous phase, even at high water contents (W = 20). This higher efficiency is due to a significant decrease in (Km)*corr values.     

High pressure EPR studies of protein mobility in reversed micelles

We have investigated the effect of pressure on structural properties of subtilisin solubilized in reversed micelles of Tween-85/isopropanol in hexane. Electron paramagnetic resonance (EPR) spectra of spin-labeled enzyme indicate a reduction in spin-label mobility when the enzyme is transferred from aqueous solution to the microemulsion. One explanation for the spectral broadening is a change in the protein's active-site conformation and/or dynamics. However, over a W(0) range of 80 to 180, EPR spectroscopy could detect no change in the enzyme's environment, conformation, or molecular dynamics. The EPR spectra also contained a contribution from free spin label located in an environment with a polarity roughly between that of propanol and bulk water. No changes in the polarity surrounding the free spin label nor in the enzyme's structural properties were evident at pressures up to 10,000 psi. Previous work has demonstrated that pressure can be used to manipulate the size of some reversed micelles, and the EPR data indicated that for this system such pressure tuning of micellar properties will not adversely affect the structure of solubilized enzyme. (c) 1994 John Wiley & Sons, Inc.     

Effect of hydration degree of aerosol OT reversed micelles and surfactant concentration in heptane on spectral and catalytic properties of catalase.

The influence of micelle hydration degree (w0) and AOT concentration on fluorescence, circular dichroism (CD), catalytic activity, and stability of catalase in Aerosol OT (AOT) reversed micelles in heptane was investigated. The quantitative parameters--differential fluorescence of catalase (DeltaI), protein molar ellipticity ([theta]lambda), initial rate of catalytic reaction, catalase efficiency (kcat/Km), and rate constant of enzyme inactivation (kin, sec-1)--decreased with increasing AOT concentration in micellar systems, reflecting the interaction of solubilized catalase with the AOT micellar aggregates in heptane. The dependences of all these parameters on increasing hydration degree of micelles (w0) were characterized by the appearance of maxima at w0 of 8, 15-18, and 26-30. These maxima are suggested to reflect three different states of catalase in the micellar system, distinguished by their conformations and catalytic activity, which is determined by the micellar microenvironment of the enzyme.     

Protein refolding by reversed micelles utilizing solid-liquid extraction technique

This article reports that a reversed micellar solution is useful for refolding proteins directly from a solid source. The solubilization of denatured RNase A, which had been prepared by reprecipitation from the denaturant protein solution, into reversed micelles formulated with sodium di-2-ethylhexyl sulfosuccinate (AOT) has been investigated by a solid-liquid extraction system. This method is an alternative to the ordinary protein extraction in reversed micelles based on the liquid-liquid extraction. The solid-liquid extraction method was found to facilitate the solubilization of denatured proteins more efficiently in the reversed micellar media than the ordinary phase transfer method of liquid extraction. The refolding of denatured RNase A entrapped in reversed micelles was attained by adding a redox reagent (reduced and oxidized glutathion). Enzymatic activity of RNase A was gradually recovered with time in the reversed micelles. The denatured RNase A was completely refolded within 30 h. In addition, the efficiency of protein refolding was enhanced when reversed micelles were applied to denatured RNase A containing a higher protein concentration that, in the case of aqueous media, would lead to protein aggregation. The solid-liquid extraction technique using reversed micelles affords better scale-up advantages in the direct refolding process of insoluble protein aggregates.     

Purification of industrial alphaamylase by reversed micellar extraction

The purification of industrial alpha-amylase by liquid-liquid extraction with Aliquat 336 reversed micellar solution as the extractant was studied. Seven kinds of Aliquat 336 reversed micellar solution, formed by using seven kinds of straight chain alkyl alcohols as cosolvent, have been utilized to extract industrial a-amylase. It was found that these seven kinds of reversed micellar solution can all achieve a high protein transfer efficiency in the forward extraction process. After a full forward and backward extraction cycle, however, only the reversed micelles with n-butanol as the cosolvent was found to be able to maintain the activity of alpha-amylase in the stripping solution. By using the reversed micelles of Aliquat 336/isooctane/1% (v/v) n-butanol to perform a full extraction cycle, it was found that 85% of the total activity of alpha-amylase in the industrial a-amylase could be recovered at the end of an extraction cycle and the specific activity of alpha-amylase could be concentrated about 1.5-fold; meanwhile, most of the neutral protease in the industrial a-amylase could be removed. The separation factor of alpha-amylase to neutral protease at the end of an extraction cycle can reach about 10. (c) 1995 John Wiley & Sons, Inc.