Halophila ovalis (R. Br.) Hook. f. from a submarine hot spring in southern Japan

Colonies of the seagrass Halophila ovalis are found growing adjacent to coral Acropora sp. and Seriatopora hystrix in a submarine hot spring (at 15.7 m depth, 28.6°C) at the north coast of Taketomi Island, near the southern tip of Japan. Halophila plants grow in sea water containing sulphide 930 μg S ml⁻¹ and on the substratum with fine precipitates of the submarine hot spring which have sulphide content up to 5400 μg S g⁻¹ DW. The accumulated sulphide concentration reaches as high as 8400 μg S g⁻¹ DW in under ground tissues and 5700 μg S g⁻¹ DW in above-ground tissues, respectively. It is suggested that, not the sulphide concentration but light and possibly water temperature are the limiting factors for the Halophila colonization in the submarine hot spring.     

Growth and photosynthesis of Hydrocotyle ranunculoides L. fil. in Central Europe

Floating Pennywort (Hydrocotyle ranunculoides L. fil.) is a worldwide distributed aquatic plant. The species is native to North America and quite common also in Central and South America. In Europe, Japan and Australia it is known as an alien plant, sometimes causing serious problems for affected ecosystems and human use of water bodies. Starting from Western Europe with an eastwards directed spread, Floating Pennywort was recorded in Germany in 2004 for the first time. Since then, the species spread out and got established in western parts of Central Europe. For a definite prediction of the potential of a further spread, data about biology, in particular growth and photosynthesis are needed. Here, regeneration capacity, growth at different nutrient availabilities and photosynthesis of H. ranunculoides were investigated. In addition biomass samples were taken in the field. Results show an enormous regeneration capacity (e.g., by forming new shoots from small shoot fragments), increasing growth rates under increasing nutrient availability and a maximum increase of biomass reaching 0.132±0.008 g g⁻¹ dw d⁻¹. Dense populations of H. ranunculoides growing in ponds and oxbows were found at high nutrient content of the substrate, the biomass reaching there up to 532.4±14.2 g dw m⁻². Gas exchange analysis showed a physiological optimum of H. ranunculoides CO₂ uptake at temperatures between 25 and 35 °C and high photon flux densities (PPFD) above 800 μmol photons m⁻² s⁻¹. In comparison, native Hydrocotyle vulgaris showed an optimum of net photosynthesis at 20–30 °C and a light saturation of CO₂ gas exchange at 350 μmol photons m⁻² s⁻¹.     

Halothiobacillus neapolitanus strain OSWA isolated from "The Old Sulphur Well" at Harrogate (Yorkshire, England)

The “Old Sulphur Well” has a subterranean input of water containing 5.5 mM total sulfide, which would be inhibitory to the growth of most bacteria. The obligately chemolithoautotrophic Halothiobacillus neapolitanus is a sulfur bacterium known to tolerate and metabolize high sulfide concentrations, and we report the isolation of H. neapolitanus strain OSWA from this source. Strain OSWA grows well on thiosulfate and tetrathionate as energy sources, and tolerates at least 5 mM sulfide. Its specific growth rates and yields in batch culture were 0.22 h⁻¹ and 5.3 g mol⁻¹ (thiosulfate), and 0.23 h⁻¹ and 9.5 g mol⁻¹ (tetrathionate). Its 16S rRNA gene sequence shows >99% identity to reference sequences of H. neapolitanus, and it shares morphological and physiological characteristics typical of the species. It is one of a very small number of strains of H. neapolitanus described to date, and the first to be isolated from an ancient sulfide-rich natural spa.     

The response of an emergent sedge Bolboschoenus medianus to salinity and nutrients

The potential for nutrient load (30, 100 and 350 g N m⁻² per year) to alter plant performance under saline conditions (control, 4.5, 9 and 13 dS m⁻¹) was examined in the sedge Bolboschoenus medianus. Relative growth rates (RGR) across nutrient loadings ranged from 30.2 to 41.8 mg g⁻¹ per day in controls and were reduced to 20.9–28.5 mg g⁻¹ per day by salinities of 13 dS m⁻¹. Whilst higher nutrient loads generally increased RGR, the response was smaller at higher salinities. Responses to salinity and nutrient load were specific. Nutrient load increased the RGR via increases in the leaf area ratio (LAR). The LAR ranged from 1.9 to 2.1 m² kg⁻¹ across salinity treatments at 30 g N m⁻² per year, and increased to 2.5–2.8 m² kg⁻¹ at 350 g N m⁻² per year. Salinity reduced the RGR via a reduction in the net assimilation rate (NAR). The NAR in control plants ranged from 14.7 to 16 g m⁻² per day across nutrient loadings and decreased to 11–12 g m⁻² per day at 13 dS m⁻¹. Carbon isotope discrimination of leaves decreased by 2–3‰ in response to 13 dS m⁻¹ at the lower nutrient loadings. A prominent response of B. medianus to salinity was a change in biomass allocation from culms to tubers. In contrast, the response to nutrient load was characterised by a shift in biomass allocation from roots to leaves.     

Maackiain in Cicer bijugum Rech. f. associated with resistance to Botrytis grey mould

Resistance in Cicer bijugum Rech. f. a wild relative of chickpea, to Botrytis grey mould (BGM), caused by Botrytis cinerea Pers., was shown to be associated with high concentrations of maackiain when compared to three susceptible species. The two BGM resistant accessions of C. bijugum contained between 200 and 300 μg maackiain g⁻¹ of foliage whereas the BGM susceptible species C. arietinum, C. echinospermum and C. reticulatum contained less than 70 μg g⁻¹. Furthermore, the concentration of maackiain increased to more than 400 μg g⁻¹ in the resistant wild species after being inoculated with the pathogen whereas no significant increase was recorded in the susceptible species. The germination of spores of Botrytis cinerea, treated with maackiain, was inhibited in a dose dependent manner; less than 10% of spores germinated when treated with 500 μg ml⁻¹. The data indicate that maackiain may be an important component in BGM resistance in the wild chickpea C. bijugum and that the resistance is enhanced in the presence of the pathogen.     

Enhancement of growth and gymnodimine production by the marine dinoflagellate, Karenia selliformis

Because of its novel bioactive properties the production of gymnodimine for use as a pharmaceutical precursor has aroused interest. The dinoflagellate, Karenia selliformis produces gymnodimine when grown in bulk culture using GP + selenium medium but the growth rates (μ) and levels of gymnodimine are low (μ, 0.05 days⁻¹; gymnodimine 250 μg L⁻¹ max). We describe the effects of organic acid additions (acetate, glycolate, alanine and glutamate additions and combinations of these) in enhancing growth and gymnodimine production in axenic cultures. The most effective organic acid combinations in decreasing order were: glycolate/alanine > acetate > glycolate. Glycolate/alanine optimised gymnodimine production by prolonging growth (maximum cell yield, 1.76 × 10⁵ cells mL⁻¹; gymnodimine, 1260 μg L⁻¹; growth rate (μ), 0.2 days⁻¹) compared to the control (growth maximum cell yield, 7.8 × 10⁴ cells mL⁻¹; gymnodimine, 780 μg L⁻¹; μ, 0.17 days⁻¹). Acetate enhanced gymnodimine by stimulating growth rate (μ, 0.23 days⁻¹) and the large concentration of gymnodimine per cell (16 pg cell⁻¹ cf. 9.8 pg cell⁻¹ for the control) suggests a role for this compound in gymnodimine biosynthesis. Amending culture media with Mn²⁺ additions resulted in slightly decreased growth in control cultures and increased the gymnodimine while in glycolate/alanine cultures growth was stimulated but gymnodimine production decreased. The results suggest that the organic acid can enhance gymnodimine production by either enhancing growth maximum or the biosynthetic pathway.     

Photosynthetic response of Myriophyllum salsugineum A.E. orchard to photon irradiance, temperature and external free CO2

The photosynthetic capacity of Myriophyllum salsugineum A.E. Orchard was measured, using plants collected from Lake Wendouree, Ballarat, Victoria and grown subsequently in a glasshouse pond at Griffith, New South Wales. At pH 7.00, under conditions of constant total alkalinity of 1.0 meq dm⁻³ and saturating photon irradiance, the temperature optimum was found to be 30–35°C with rates of 140 μmol mg⁻¹ chlorophyll a h⁻¹ for oxygen production and 149 μmol mg⁻¹ chlorophyll a h⁻¹ for consumption of CO₂. These rates are generally higher than those measured by other workers for the noxious Eurasian water milfoil, Myriophyllum spicatum L., of which Myriophyllum salsugineum is a close relative. The light-compensation point and the photon irradiance required to saturate photosynthetic oxygen production were exponentially dependent on water temperature. Over the temperature range 15–35°C the light-compensation point increased from 2.4 to 16.9 μmol (PAR) m⁻² s⁻¹ for oxygen production while saturation photon irradiance increased from 41.5 to 138 μmol (PAR) m⁻² s⁻¹ for oxygen production and from 42.0 to 174 μmol (PAR) m⁻² s⁻¹ for CO₂ consumption. Respiration rates increased from 27.1 to 112.3 μmol (oxygen consumed) g⁻¹ dry weight h⁻¹ as temperature was increased from 15 to 35°C. The optimum temperature for productivity is 30°C.     

A study in UF-membrane reactor on activity and stability of nitrile hydratase from Microbacterium imperiale CBS 498-74 resting cells for propionamide production

The bioconversion of propionitrile to propionamide was catalysed by nitrile hydratase (NHase) using resting cells of Microbacterium imperiale CBS 498-74 (formerly, Brevibacterium imperiale). This microorganism, cultivated in a shake flask, at 28 °C, presented a specific NHase activity of 34.4 U mg_DCW⁻¹ (dry cell weight). The kinetic parameters, K_m and V_max, tested in 50 mM sodium phosphate buffer, pH 7.0, in the propionitrile bioconversion was evaluated in batch reactor at 10 °C and resulted 21.6 mM and 11.04 μmol min⁻¹ mg_DCW⁻¹, respectively. The measured apparent activation energy, 25.54 kJ mol⁻¹, indicated a partial control by mass transport, more likely through the cell wall.

UF-membrane reactors were used for kinetic characterisation of the NHase catalysed reaction. The time dependence of enzyme deactivation on reaction temperature (from 5 to 25 °C), on substrate concentrations (from 100 to 800 mM), and on resting cell loading (from 1.5 to 200 μg  ml⁻¹) indicated: lower diffusional control (E_a=37.73 kJ mol⁻¹); and NHase irreversible damage caused by high substrate concentration. Finally, it is noteworthy that in an integral reactor continuously operating for 30 h, at 10 °C, 100% conversion of propionitrile (200 mM) was attained using 200 μg  ml⁻¹ of resting cells, with a maximum volumetric productivity of 0.5 g l⁻¹ h⁻¹.     

Bench-scale fermentation of Trichoderma viride on wastewater sludge: Rheology, lytic enzymes and biocontrol activity

Conidiation and lytic enzyme production by Trichoderma viride at different solids concentration of pre-treated municipal wastewater sludge was examined in a 15-L fermenter. The maximum conidia concentration (5.94 × 10⁷ CFU mL⁻¹ at 96 h) was obtained at 30 g L⁻¹ suspended solids. The maximum lytic enzyme activities were achieved around 12–30 h of fermentation. Bioassay against a fungal phytopathogen, Fusarium sp. showed maximum activity in the sample drawn around 96 h of fermentation at 30 g L⁻¹ suspended solids concentration. Entomotoxicity against spruce budworm larvae showed maximum value ≈17290 SBU μL⁻¹ at 30 g L⁻¹ suspended solids concentration at the end of fermentation (96 h). Plant bioassay showed dual action of T. viride, i.e., disease prevention and growth promotion. The rheological analyses of fermentation sludges showed the pseudoplastic behaviour. In order to maintain required dissolved oxygen concentration ≥30%, the agitation and aeration requirements significantly increased at 35 g L⁻¹ compared to 30 and 25 g L⁻¹. The oxygen uptake rate and volumetric oxygen mass transfer coefficient, k_La at 35 g L⁻¹ did not increase in comparison to 30 g L⁻¹ due to rheological complexity of the broth during fermentation. Thus, the successful fermentation operation of the biocontrol fungus T. viride is a rational indication of its potential for mass-scale production for agriculture and forest sector as a biocontrol agent.     

Influence of sucrose on the rheology and granule size of cross-linked waxy maize starch dispersions heated at two temperatures

Cross-linked waxy maize (CWM) starch dispersions (STDs) of concentration 50 g kg⁻¹ were heated in sucrose solutions containing 0–600 g kg⁻¹ (g sucrose/kg dispersion) at 85 °C at low shear and in intermittently agitated cans at 110 °C. The STDs heated in 0–300 g kg⁻¹ sucrose exhibited antithixotropic behavior, while those heated in 400–600 g kg⁻¹ sucrose exhibited thixotropic behavior. The mean starch granule diameter of the starch dispersions did not show strong dependence on sucrose concentration. The dispersions, especially those with high sucrose concentrations and heated at 110 °C, exhibited G′ versus frequency (ω) profiles of gels. The STDs exhibited first normal stress differences that increased in magnitude with the concentration of sucrose. Values of the first normal stress coefficient of canned dispersions calculated from dynamic rheological data plotted against ω and experimental values plotted against shear rate of some of the STDs overlapped.     

Conceptual model of seagrass die-off in Florida Bay: Links to biogeochemical processes

Seagrasses are recognized as important plant communities in coastal estuaries and lagoons across both tropical and temperate climes; thus, large-scale seagrass die-off events worldwide are of general concern. In Florida Bay, at the southern terminus of the Florida peninsula, seagrass die-off events up to 4000 ha have been reported and smaller scale mortality events are noted annually. In the present study, we examined several hypothesized causative factors (high temperature, hypersalinity, sulfide toxicity) of seagrass (Thalassia testudinum) mortality in Florida Bay. To test sulfide effects, in situ sulfide production was stimulated by applying a labile carbon source (glucose) to sulfate reducers in the sediment at five sites across the bay (northeastern, northcentral, and southwestern basins). During the one year study, high temperature (32–36 °C) and salinity (> 50 psu) were recorded in the bay associated with a regional drought. We also experienced major seagrass die-off events at two of our southwestern bay sites. These field conditions provided an excellent opportunity to closely examine cause–effect relationships among stressors and die-off events in the field, and verify results of our previous mesocosm experiments. Even though glucose amendments stimulated porewater sulfides in bay sediments (4–8 mmol L^− 1), no significant differences in biomass, short shoot density or final growth rates were found between control and glucose plots. In addition, the highest growth rates and shoot densities were concomitant with maximum water column salinity (> 50 psu) and temperature (32–36 °C), when porewater sulfides were also in the millimolar range. Large-scale seagrass mortality events, encompassing  50% of the entire meadow at one site, occurred at southwestern bay sites when plants were down regulating (slower growth and shoot density), probably in response to shorter day length and lower temperature (30–34 to 23–26 °C) from October, 2004 to January, 2005. Sulfate reduction rates (SRR) were also 2-fold higher in the southwestern (214–488 nmol cm^− 3 d^− 1) versus northcentral and northeastern (97–240 nmol cm^− 3 d^− 1) bay sites, possibly limited by labile carbon, which we found to stimulate SRR 3-fold in northeastern and northcentral bay sites (461–708 nmol cm^− 3 d^− 1) and 4-fold at southwestern bay sites (1211–2036 nmol cm^− 3 d^− 1). Based on a synthesis of the field data reported herein, our mesocosm experiments to date, and contributions by others, we present a conceptual model of seagrass die-off in Florida Bay outlining a cascade of stressors, stimulated by P enrichment, which leads to high O₂ consumption in the system triggering a seagrass die-off event.     

Antimicrobial activity of steady-state cultures of Bacillus sp. CCMI 1051 against wood contaminant fungi

The effect of changing dilution rate (D) on Bacillus sp. CCMI 1051 at dilution rates between 0.1 and 0.55 h⁻¹ in a glucose-limited medium was studied. Biomass values varied between 0.88 and 1.1 g L⁻¹ at D values of 0.15–0.35 h⁻¹. Maximal biomass productivity was found to be 0.39 g L⁻¹ h⁻¹, obtained at D = 0.35 h⁻¹ and corresponding to a 54.4% conversion of the carbon into cell mass. The highest rate of glucose consumption was 4.45 mmol g⁻¹ h⁻¹ occurring at D = 0.4 h⁻¹. The glucose concentration inside the chemostat was below the detection level starting to accumulate around 0.4 h⁻¹. Growth inhibition of fifteen strains of fungi by the broth of the steady-state cell-free supernatants was assessed. Results showed that the relative inhibition differ among the target species but was not influenced by the dilution rate changing.     

Effect of leaf age on CAM activity in Littorella uniflora

In this study the effect of ontogenetic drift on crassulacean acid metabolism (CAM) was investigated in the aquatic CAM-isoetid Littorella uniflora. The results of this study strengthen the general hypothesis of CAM being a carbon-conserving mechanism in aquatic plants, because high-CAM capacity (45–183 μequiv. g⁻¹ FW) was present in all leaves of L. uniflora irrespective of age. Since possession of CAM in aquatic plants allows CO₂ uptake throughout the light/dark cycle, presence of CAM in all leaves influences the carbon balance of L. uniflora positively. On average for all lakes, different leaf classes accounted for 11–36% of the total dark CO₂ uptake by the individual plant.

The capacity for both CAM and photosynthesis declined with increasing leaf age, and was in the oldest leaves only 25–53% of the capacity in the youngest. The photosynthetic capacity was estimated to be sufficiently high to ensure refixation of the CO₂ released from malate during decarboxylation in the daytime. In line with this, a linear coupling between CAM capacity and photosynthetic capacity was found. Parallel to the change in photosynthetic capacity, an age-related change in total ribulose-bisphosphate carboxylase/oxygenase (rubisco) activity from 732 μmol C g⁻¹ DW h⁻¹ in the youngest leaves to 346 μmol C g⁻¹ DW h⁻¹ in the oldest was observed. In contrast, no significant change in phosphoenolpyruvate carboxylase (PEPcase) activity with leaf age was observed (means ranged between 46 and 156 μmol C g⁻¹ DW h⁻¹).     

Estimation of soluble β-glucan content of yeast cell wall by the sensitivity to Glucanex 200G treatment

The soluble β-glucan contents in the cell wall of yeasts were estimated by treating cells with Glucanex^® 200G that contained mainly β1,3-glucanase and some β1,6-glucanase. The sensitivity of cell walls of 11 yeasts to various concentrations of β-glucanase was compared. The yeasts that are resistant to β-glucanase treatment are expected to contain higher β-glucan content and those that are sensitive to the β-glucanase treatment are expected to contain lower β-glucan content. Two yeast strains were selected for further study by comparing the sensitivity of cell wall to β-glucanase; Candida bombicola and Candida albicans. Candida bombicola was more resistant and C. albicans was more sensitive to the Glucanex^® 200G treatment. The results of enzyme sensitivity tests were verified by quantification of soluble β-glucan content purified from the yeasts. Much larger amount of soluble β-glucan was obtained from the cell walls of C. bombicola (0.08 g g⁻¹ dried cell) than C. albicans (0.025 g g⁻¹ dried cell).     

Continuous production of green cells of Haematococcus pluvialis: Modeling of the irradiance effect

This paper presents a model for the continuous production of green cells of the microalga Haematococcus pluvialis, in both indoor and outdoor conditions. To develop this model, the influence of irradiance and dilution rate on the performance of continuous cultures of H. pluvialis was studied in the laboratory but simulating outdoor conditions. Characterization of the cultures included biomass productivity, fluorescence of chlorophylls, pigment content, elemental composition of the biomass, cell density, cell size, homogeneity and nitrate consumption rate. Results showed that the optimal dilution rate was 0.04 h⁻¹, and that higher external irradiance resulted in higher biomass productivity in all cases, with a maximum value of 0.58 g L⁻¹day⁻¹. Continuous cultures were stable for more than 3 months, in spite of photoinhibition at noon, producing homogeneous biomass with a stable biochemical composition and cell morphology at each steady state. Astaxanthin accumulation was not observed in spite of the high levels of irradiance essayed, and cells remained in the flagellated-palmeloids green form whatever the culture conditions. High dilution rates produced small cells of 22 μm diameter, with a high nitrogen content of up to 10.0% d.wt. The average irradiance within the reactor was the main factor determining the behaviour of the cultures, although the external irradiance impinging on the reactor surface also influenced the results, indicating the existence of photoinhibition. The influence of both external and average irradiance on the growth of H. pluvialis was modelized. The accuracy of the model obtained was verified on a 0.22 m³ outdoor tubular photobioreactor operated in both discontinuous and continuous mode, obtaining a maximum biomass productivity of 0.68 g L⁻¹day⁻¹. The model reproduced the experimental data of biomass concentration and productivity, cell size and nitrate consumption, providing to be a powerful tool for optimizing the design and operation of outdoor photobioreactors for the production of green cells of H. pluvialis.     

Influence of the alkyl-substituted silane precursor on sol–gel encapsulated lipase activity

Lipase from Candida rugosa was encapsulated within a chemically inert sol–gel support prepared by polycondensation of three precursor types (tetraethoxysilane (TEOS), methyltrimethoxysilane (MTMS) and polydimethylsilane (PDMS)) in the presence and absence of polyethylene glycol (PEG) and polyvinyl alcohol (PVA) as additives. Silica and their derivatives were characterised with regard to mean pore diameter, specific surface area, pore size distribution (BET method), weight loss upon heating thermogramivemetric analysis (TGA), chemical composition Fourier transform infrared spectroscopy (FT-IR), and catalytic activities. Immobilisation yields based on the recovered lipase activity vary from 3.02 to 31.98% and the highest efficiency was attained when lipase was encapsulated using TEOS in the presence of the PEG. Further information was obtained by testing the derivatives in esterification reactions and a different reactivity profile was found. Better performance was obtained with derivatives containing lipase encapsulated within gels prepared with MTMS as precursor in the presence of PEG. This lipase preparation exhibits increased esterification activity (155 μmol g⁻¹ min⁻¹), up to of three times greater than that prepared with TEOS (52 μmol g⁻¹ min⁻¹), and almost twice that prepared with MTMS/PDMS (89 μmol g⁻¹ min⁻¹) as precursors.     

Bioreactor operation for transgenic Nicotiana tabacum cell cultures and continuous production of recombinant human granulocyte-macrophage colony-stimulating factor by perfusion culture

The production of hGM-CSF was investigated in both a flask and a 5-l bioreactor, using transgenic Nicotiana tabacum suspension cells. While the maximum cell density and secreted hGM-CSF in the flask were 15.4 g l⁻¹ and 6.5 μg l⁻¹, respectively, those in the bioreactor were 15.6 g l⁻¹ and 7.6 μg l⁻¹. No detectable growth inhibition, shorter production of hGM-CSF and reduced cell viability in the batch bioreactor were observed under the specific conditions used compared with the flask culture. To improve the productivity, a perfusion culture was carried out in the bioreactor, with three different perfusion rates (0.5, 1.0 and 2.0 day⁻¹). In all cases, the hGM-CSF in the medium was significantly increased during the overall culture period (16 days), with maximum values 3.0-, 9.4- and 6.0-fold higher than those obtained in the batch cultures, respectively, even though the intracellular hGM-CSF content was not significantly varied by the perfusion rate. In terms of the total amount of hGM-CSF secreted, 205.5, 1073.2 and 1246.3 μg accumulated in the perfusate within 16 days at the perfusion rates of 0.5, 1.0 and 2.0 day⁻¹, respectively. It was concluded that the beneficial effect of perfusion on the production of hGM-CSF originated from the reduced proteolytic degradation due to the lower protease activity caused by the perfusion. Additionally, the cell growth and physiology in the perfusion culture were somewhat negatively affected by the increased perfusion rate, although the dry cell density steadily increased, and as a result, 19.4, 22.4 and 22.9 g l⁻¹ of maximum cells were obtained with perfusion rates of 0.5, 1.0 and 2.0 day⁻¹, respectively. This work highlighted the importance of proteolytic degradation in plant cell cultures for the production of secretory proteins and the feasibility of perfusion strategies for the continuous production of foreign proteins by the prevention of protein loss due to proteolytic enzymes.     

Nuclear maturation of ovine oocytes in cultured preantral follicles

Small (150–250 μm in diameter) and large (251–400 μm in diameter) preantral follicles (PFs) in sheep were cultured for 6 days in four different concentrations of transforming growth factor-alpha (TGF-), epidermal growth factor (EGF), FSH and LH. Proportions of follicles exhibiting growth, antrum formation and increase in follicular and oocyte diameter were the initial indicators of development. The ability of the oocytes isolated from these cultured follicles to mature to metaphase II (MII), after 24 h culture in a known in vitro maturation medium was the final criterion of success. TGF- 2.5 ng ml⁻¹, EGF 50 ng ml⁻¹ and FSH 1 and 2 μg ml⁻¹ supported good initial growth of the PFs. Thirty and seventeen percent of the oocytes from the large PFs cultured in TGF- 2.5 ng ml⁻¹ and FSH 2 μg ml⁻¹ respectively, matured to the MII stage. These proportions for oocytes from small PFs were 11 and 6%, respectively. Oocytes from follicles cultured in EGF did not mature to the MII stage. LH at all concentrations tested and TGF-, EGF and FSH above 5, 50 ng ml⁻¹ and 2 μg ml⁻¹, respectively, induced degeneration of the PFs. It was concluded that (i) TGF- 2.5 ng ml⁻¹ supports development of large PFs in sheep to obtain meiotically competent oocytes, (ii) PFs > 250 μm in initial diameter develop better in vitro, and (iii) in vitro development of sheep PFs could be obtained independent of gonadotropin stimulation.     

Luminescent yeast cells entrapped in hydrogels for estrogenic endocrine disrupting chemical biodetection

In the construction of luminescent yeast cell based fibre-optic biosensors, we demonstrate a novel approach for estrogenic endocrine disrupting chemical (EDC) biodetection by entrapping genetically modified Saccharomyces cerevisiae cells, containing the estrogen receptor alpha-mediated expression of the luc reporter gene, in hydrogel matrices based on calcium alginate or PVA. In order to insure a significant signal, an optimal immobilization ratio of 1:2 alginate 3% (w/v): 5 × 10⁶ [cells/ml], respectively, was used with the highest 17-β-estradiol (β-E2) induction factor after 2.5 h of incubation with 10 [nM] β-E2. It was shown that biocompatible alginate beads, 4.27–4.55 × 10⁵ [CFU/bead], which were characterized by a detection limit of 0.08 [μg l⁻¹] and an EC50 of 0.64 [μg l⁻¹] for β-E2, retained their viability for luminescence measurements after 1 month of storage at −80 °C slow freeze condition, and thus repeated cell cultivations were not required. The assay reproducibility for each tested EDC, represented by the coefficients of variation (CV), ranged from 4.35 to 18.47%. An alternative immobilization method, based on a room temperature partial drying of polyvinyl alcohol (PVA) solution (LentiKat^® Liquid) and cell suspension mix, was investigated with only a slightly lower detection limit for β-E2 than that reported with alginate beads. Alginate yeast based hydrogels may also be applicable to the analysis of environmental water samples since the trend of detected estrogenic activities with alginate beads roughly correlated with LC–MS–MS analytical results.     

Cadmium biosorption on Spirulina platensis biomass

Dry biomass of Spirulina platensis re-hydrated for 48 h was employed as a biosorbent in tests of cadmium(II) removal from water. Various concentrations of biomass (from 1 to 4 g l⁻¹) and metal (from 100 to 800 mg l⁻¹) were tested. Low biomass levels (X_o  2 g l⁻¹) ensured metal removal up to 98% only at Cd₀= 100 and 200 mg l⁻¹, while X_o  2.0 g l⁻¹ were needed at Cd₀ = 400 mg l⁻¹ to achieve satisfactory results. Whereas X_o = 4.0 g l⁻¹ was effective to remove up to Cd₀ = 500 mg l⁻¹, a further increase in metal concentration (Cd₀ = 600 and 800 mg l⁻¹) led to progressive worsening of the system performance. At a given biomass levels, the kinetics of the process was better at low Cd²⁺ concentrations, while, raising the adsorbent level from 1.0 to 2.0 g l⁻¹ and then to 4.0 g l⁻¹, the rate constant of biosorption increased by about one order of magnitude in both cases and the adsorption capacity of the system progressively decreased from 357 to 149 mg g⁻¹.