几种新型植物基因表达载体的构建方法

利用基因工程技术手段研究基因功能过程中,构建基因表达载体处于转基因植物的主导地位,采用合适的构建方法会使实验效果事半功倍。植物基因表达载体的构建方法除了传统构建法、Gateway技术、三段T-DNA法、一步克隆法等,还有近年来出现的几种新型的载体构建方法:基于竞争性连接原理快速构建小片段基因表达载体;MicroRNA前体PCR置换法适用于构建小分子RNA表达载体;重组融合PCR法特别适用于插入片段中含有较多限制性酶切位点的载体构建;利用In-Fusion试剂盒可以将任何目的片段插入一个线性化载体的某个区域;构建多片段复杂载体可采用不依赖序列和连接的克隆方法(Sequence and ligation-independent cloning,SLIC)法;Gibson等温拼接法;Golden Gate拼接法。本文将在总结分析前人工作的基础上,结合自己工作的体会和经验分析这7种新方法的特点,期望通过这几种新的方法给植物基因工程表达载体的构建提供新的思路。     

A modified pBR322 vector with improved properties for the cloning, recovery, and sequencing of blunt-ended DNA fragments

The construction of a plasmid vector which facilitates the cloning and recovery of blunt-ended DNA fragments is described. This plasmid, called pHP34, differs from pBR322 by a 10-bp insertion which introduces a unique SmaI site immediately flanked by two EcoRI sites. Blunt-ended DNA fragments cloned in the SmaI site can be recovered by digestion with EcoRI. Small cloned fragments can be chemically sequenced using a strategy which does not require their purification. The use of a plasmid related to pHP34 for in vitro mutagenesis by the insertion of a DNA linker fragment conferring an antibiotic resistance is also discussed.     

Cloning and expression in Escherichia coli of the naphthalene degradation genes from plasmid NAH7

The genes encoding the enzymes responsible for conversion of naphthalene to 2-hydroxymuconic acid (nahA through nahI) are contained on a 25-kilobase EcoRI fragment of an 85-kilobase NAH plasmid of Pseudomonas putida. These genes were cloned into the plasmid vectors pBR322 and RSF1010 to obtain the recombinant plasmids pKGX505 and pKGX511, respectively. To facilitate cloning and analysis, an NAH7 plasmid containing a Tn5 transposon in the salicylate hydroxylase gene (nahG) was used to derive the EcoRI fragment. The genes for naphthalene degradation were expressed at a low level in Escherichia coli strains containing the fragment on the recombinant plasmids pKGX505 or pKGX511. This was shown by the ability of whole cells to convert naphthalene to salicylic acid and by in vitro enzyme assays. The expression of at least two of these genes in E. coli appeared to be regulated by the presence of the inducer salicylic acid. In addition, high-level expression and induction appear to be mediated by an NAH plasmid promoter and a regulatory gene located on the fragment. A restriction endonuclease cleavage map of the cloned fragment was generated, and the map positions of several nah genes were determined by analysis of various subcloned DNA fragments.     

Rapid and reliable universal cloning of influenza A virus genes by target-primed plasmid amplification

Reverse genetics has become pivotal in influenza virus research relying on rapid generation of tailored recombinant influenza viruses. They are rescued from transfected plasmids encoding the eight influenza virus gene segments, which have been cloned using restriction endonucleases and DNA ligation. However, suitable restriction cleavage sites often are not available. Here, we describe a cloning method universal for any influenza A virus strain which is independent of restriction sites. It is based on target-primed plasmid amplification in which the insert provides two megaprimers and contains termini homologous to plasmid regions adjacent to the insertion site. For improved efficiency, a cloning vector was designed containing the negative selection marker ccdB flanked by the highly conserved influenza A virus gene termini. Using this method, we generated complete sets of functional gene segments from seven influenza A strains and three haemagglutinin genes from different serotypes amounting to 59 cloned influenza genes. These results demonstrate that this approach allows rapid and reliable cloning of any segment from any influenza A strain without any information about restriction sites. In case the PCR amplicon ends are homologous to the plasmid annealing sites only, this method is suitable for cloning of any insert with conserved termini.     

RF cloning: a restriction-free method for inserting target genes into plasmids

Restriction-free (RF) cloning provides a simple, universal method to precisely insert a DNA fragment into any desired location within a circular plasmid, independent of restriction sites, ligation, or alterations in either the vector or the gene of interest. The technique uses a PCR fragment encoding a gene of interest as a pair of primers in a linear amplification reaction around a circular plasmid. In contrast to QuickChange site-directed mutagenesis, which introduces single mutations or small insertions/deletions, RF cloning inserts complete genes without the introduction of unwanted extra residues. The absence of any alterations to the protein as well as the simplicity of both the primer design and the procedure itself makes it suitable for high-throughput expression and ideal for structural genomics.     

Plasmid vector for cloning in Streptococcus pneumoniae and strategies for enrichment for recombinant plasmids

A new plasmid, pLS101, was constructed for use as a vector for cloning in Streptococcus pneumoniae. This plasmid carries two selectable genes, tet and malM, each of which contains two or more restriction sites for cloning. Insertional inactivation of the malM gene allowed direct selection of TcRMal- clones containing recombinant plasmids. Other means of enriching a recipient population for cells containing recombinant plasmids were examined. The effect of removing vector terminal phosphate in attempts to clone heterogeneous DNA fragments, such as those from chromosomal DNA, was to abolish recombinant plasmid establishment altogether, presumably because donor DNA processing during entry into the cell prevented establishment of the hemiligated molecule. However, with homogeneous DNA fragments, such as those from plasmid or viral DNA, vector phosphate removal allowed enrichment for recombinant plasmids. In the cloning of heterogeneous DNA that was homologous to the recipient chromosome (i.e. chromosomal DNA from S. pneumoniae), recovery of recombinant plasmids could be enriched tenfold (relative to the regenerated vector) by the process of chromosomal facilitation of plasmid establishment. This involved an additional passage of the mixed plasmids in which interaction with the chromosome of plasmids containing chromosomal DNA inserts (i.e. recombinant plasmids) increased their frequency of establishment relative to the vector plasmid. An overall strategy for cloning in S. pneumoniae, depending on the nature of the fragment to be cloned, is proposed.     

Gene engineering by selectable intraplasmid recombination: construction of novel dihydrofolate reductase minigenes

An intraplasmid recombination system in Escherichia coli has been designed to make possible the engineering of various genes using methods that greatly reduce dependence on appropriately placed restriction enzyme sites. This system has been used to manipulate intervening sequences in dihydrofolate reductase minigenes and to vary the number of 48-bp repeats in the promoter region. In this method, the two fragments to be recombined are cloned into a plasmid separated by a fragment of DNA containing an expressible galactokinase-encoding gene (galK). Selection for loss of the galK gene, but for retention of the plasmid in E. coli, results in a plasmid in which the two fragments have undergone homologous recombination. Several new plasmids are reported here which contain an expressible galK gene flanked by multiple restriction sites. These plasmids should be useful in recombination and as convenient sources of a gene for which both positive and negative selections are available in E. coli.     

基于抗性恢复的高效克隆超短片段重组质粒的构建

分子克隆作为一种常规技术被广泛应用于DNA及蛋白质的研究。在传统的分子克隆中,主要通过限制性内切酶先分别消化目的 DNA片段及载体,再纯化回收,然后用DNA连接酶将二者连接。而对一些超短基因片段(300 bp),通过酶切及切胶纯化后,回收率极低,导致插入表达载体比较困难。文中介绍了一种新的利用质粒抗性恢复进行克隆的方法,大大提高了克隆效率,为短基因片段的分子克隆提供了一种高效的方法。     

Phage lambda and plasmid expression vectors with multiple cloning sites and lacZ alpha-complementation

Two new lambda vectors were constructed which permit cloning of genes that are potentially lethal if cloned in analogous plasmid vectors. lambda DL10 and lambda DL11 contain the alpha-complementing fragment of lacZ and multiple cloning sites found in the polylinker region of M13mp10 and M13mp11, respectively. DNA cloned into the unique cloning sites of these vectors can be detected by inactivation of alpha-complementation. These lambda vectors provide a lac promoter for expression of foreign genes as well as the ability to make fusion proteins. Two plasmid expression vectors, pPR110 and pPR111, were constructed from lambda DL10 and lambda DL11 respectively, and pCQV2. These plasmids, which express lacZ alpha-complementing activity from the lambda PR promoter, contain multiple cloning sites immediately downstream of the PR promoter. They allow cloning of genes under the control of the PR promoter and the plasmid-encoded thermosensitive (cI857) repressor, and allow easy detection of inserted fragments by inactivation of alpha-complementation.     

Isolation of DNA fragment containing phoS gene of Escherichia coli K-12

The DNA fragment containing the phoS gene, a regulatory gene for alkaline phosphatase, has been isolated from Escherichia coli K-12 chromosomal DNA by cutting off the DNA with Hind III restriction enzyme and by cloning the gene with plasmid vector pTP 4 which was constructed in this study. The isolated fragment was of about 12.3 kbp and seemed to contain the phoT, glmS, and bgl genes. The 12.3 kbp Hind III fragment was subjected to restriction enzymes EcoR I, BamH I, Sal I, and Pst I, and was found to possess two EcoR I, no BamH I, a Sal I, and four Pst I sites. Partial deletion using these restriction enzymes suggested that the about 6 kbp Hind III-Pst I fragment contained the phoS and phoT genes. Further analysis with other restriction enzymes revealed that the 6 kbp Hind III-Pst I fragment contained a BstE II, two Mlu I and four Hpa I sites. The deletion of these restriction sites using single-strand-specific nuclease S1 suggested that the BstE II and one of Mlu I sites were in the phoT gene, and the BstE II and two Mlu I sites were not in the phoS gene.     

Plasmid vehicles for direct cloning of Escherichia coli promoters.

A multicopy plasmid cloning vehicle, pGA22, which carries genes for ampicillin resistance (Apr), tetracycline resistance (Tcr), chloramphenicol resistance (Cmr), and kanamycin resistance (Kmr) has been constructed. This plasmid has five unique sites for restriction endonucleases EcoRI, PstI, XhoI, SmaI, and SalI within antibiotic resistance genes. pGA22, which is 5.1 megadaltons in size, has a low copy number (probably fewer than 10 per genome), is capable of relaxed replication, and is mobilized by F-factor at a frequency of 10(-5). A series of promoter-cloning vehicles, pGA24, pGA39, and pGA46, has been developed from pGA22. In these plasmids the natural promoter for Tcr has been removed and has been replaced by small deoxyribonucleic acid fragments carrying unique sites for several restriction endonucleases. Cells carrying these vectors are sensitive to tetracycline unless insertional activation of the Tcr occurs by cloning a promoter-carrying deoxyribonucleic acid fragment in one of the unique sites adjacent to the 5' end of Tcr. In this way, promoters carried on a HindIII-generated deoxyribonucleic acid fragment can be inserted at the HindIII site of plasmid pGA24, pGA39, or pGA46. A promoter in fragments generated by digestion with restriction endonuclease XmaI or PstI or by any restriction endonucleases which generate flush ends, such as SmaI, PvuII, HpaI, HincII, or HaeIII, can be clones in plasmid pGA39. Plasmid pGA46 can be used to detect a promoter fragment carried on a BglII, BamHI, MboI, or PstI fragment. We also describe a plasmid, pGA44, with a unique KpnI site in the rifampin resistance gene rpoB.     

Stable cosmid vectors that enable the introduction of cloned fragments into a wide range of gram-negative bacteria

A cosmid cloning system has been developed which is useful for the construction of genomic libraries and the introduction of clones into a broad range of bacterial species. The cosmids pMMB33 and pMMB34 allow selective cloning into their unique BamHI site of 36-kb DNA fragments generated by BamHI, Sau3A and MboI partial digestion. This selective cloning is achieved by a strategy that avoids formation of polycosmids without a dephosphorylation step. It uses two unique recognition sites within the vectors for endoncleases that generate blunt-ended DNA fragments for the preparation of left and right cosmid "arms". An alternative method that uses the unique EcoRI and SstI sites and dephosphorylation of the cosmid arms prior to BamHI digestion is also outlined and discussed. The DNA is first cloned with either vector into a rec- E. coli strain, where clones can be maintained stably, and can then be introduced by mobilization into a wide range of Gram-negative species to permit the study of gene expression and complementation. Because mobilization is much more efficient than transformation, the vector has the advantage that it can be transferred between bacterial species that specify different restriction systems, where transformation appears to be inefficient. The vectors have been used to generate gene libraries from the chromosomal DNA of several Pseudomonas and a Thiobacillus species. The genes specifying myo-inositol transport from Pseudomonas strain JD34 have been cloned with this system.     

A family of high-copy-number plasmid vectors with single end-label sites for rapid nucleotide sequencing

A set of plasmid vectors was developed which allows fast sequencing by the chemical degradation method. These high-copy-number vectors are derivatives of the plasmid pUC8 containing different multiple-purpose cloning sites flanked by unique recognition sequences for the restriction enzymes BstEII, Tth111I and Eco81I as sites for end-labelling DNA. Due to their partially asymmetric recognition sequences, each of these three restriction sites can be singly end-labelled by a filling-in reaction with selected nucleotides. This allows easy single end-labelling of any cloned DNA fragment for sequencing by the chemical degradation method without any isolation and purification step after the labelling reaction. In addition, the nucleotide sequence of the complementary strand from the same end can be determined by the dideoxy chain termination procedure using the universal M13 primers. In most of the new vectors, the reading frame of the lacZ' gene is retained, allowing identification of cloned fragments.     

Functional properties of the pOV13 plasmid as a vector for DNA cloning in a broad spectrum of gram negative bacteria

The birepliconed plasmid pOV13 possesses all the properties of a vector for DNA cloning in a broad host range of bacterial cells. pOV13 is transfered by transformation and stably inherited by Escherichia coli, Brucella, Pseudomonas cells determining the resistance to streptomycin, tetrocycline and kanamycin in these bacteria. The plasmid pOV13 is a multicopy plasmid optimal in replication capacity (23kb). The plasmid carries single sites for some restriction endonucleases that are used for DNA cloning, including some restriction sites in antibiotic resistance genes. The examples of DNA cloning with the selection of recombinant clones by the insertional inactivation of kanamycin or tetracycline resistance and expression of the cloned DNAs are presented.     

Universal restriction site-free cloning method using chimeric primers

A universal restriction site-free cloning method has been developed to precisely insert a DNA fragment into a vector at any desired location without altering any nucleotide(s) in either the DNA fragment or the vector. The technique employs two pairs of chimeric primers, each containing a ribonucleotide. One pair of primers is used to amplify a target DNA fragment and another is used to prepare a linear vector. The ribonucleotide is used as a specific site for cleavage promoted by rare-earth metal ions such as La3+ or Lu3+. Therefore, blunt-ended PCR products can be converted into a dsDNA with single-stranded 3'overhangs for efficient ligation. The primers are designed so that both the target DNA fragment and vector PCR products create defined 3' overhangs to permit the formation of a seamless plasmid during the subsequent ligation. This method has been used successfully to clone the E. coli gene coding for peptidyl-tRNA hydrolase.     

A broad-host-range vector system for cloning and translational lacZ fusion analysis

A broad-host-range vector system for studying translational fusions was constructed. The region that retains the origin of replication, nic, mob, and rep genes of the broad-host-range plasmid RSF1010 was isolated as either an HincII or a PstI-PvuII restriction fragment. These restriction fragments were ligated to tetracycline, kanamycin, or streptomycin/spectinomycin resistance genes to generate plasmids pUI501, pUI511, pUI504, and pUI506. A functional lacZ gene lacking downstream lac operon sequences together with the lac promoter was constructed from plasmids pMC1871 and pUC18. This lacZ gene was inserted into pUI501 and pUI511 to generate plasmids pUI502, pUI503, pUI512, and pUI513. An oligodeoxynucleotide sequence that carries three unique blunt-end restriction sites was synthesized, annealed, and ligated in frame to the amino-terminal end of the lacZ gene in each of these plasmids. This multiple cloning sequence will allow translational fusions to the lacZ gene in all three reading frames. The stability of these plasmids and the expression of the lacZ gene in both Escherichia coli and Rhodobacter sphaeroides were studied.