A CRISPR/dCas9-assisted system to clone toxic genes in Escherichia coli

BackgroundThe cloning of toxic genes in E. coli requires strict regulation of the target genes' leaky expression. Many methods facilitating successful gene cloning of toxic genes are commonly exploited, but the applicability is severely limited.MethodsA CRISPR/dCas9-assisted system was used to clone toxic genes in E. coli. The plasmid-based and genome-integrated systems were designed in this study. And the green fluorescent protein characterization system was used to test the repression efficiency of the two systems.ResultsWe optimized the plasmid-based CRISPR/dCas9-assisted repression system via testing different sgRNAs targeting the Ptrc promoter and achieved inhibition efficiency up to 64.8%. The genome-integrated system represented 35.9% decreased GFP expression and was successfully employed to cloned four toxic genes from Corynebacterium glutamicum in E. coli.ConclusionsUsing this method, we successfully cloned four C. glutamicum-derived toxic genes that had been failed to clone in conventional ways. The CRISPR/dCas9-assisted gene cloning method was a promising tool to facilitate precise gene cloning of different origins in E. coli.General significanceThis system will be useful for cloning toxic genes from different origins in E. coli, and can accelerate the related research of gene characterization and heterologous expression in the metagenomic era.     

Construction of a new cloning vector utilizing a cryptic plasmid and the highly expressed melanin-synthesizing gene operon from Streptomyces castaneoglobisporus

Streptomyces castaneoglobisporus HUT6202 overproduces a diffusible melanin pigment and harbors a cryptic 7.4-kb plasmid, pHY6202. We constructed a Streptomyces cloning vector, pSY10CMM, consisting of the HUT6202 rep gene, the thiostrepton resistance gene and an operon encoding the synthesis of melanin pigment, abbreviated mel, from S. castaneoglobisporus. The vector, which has SphI and BamHI sites as cloning sites with insertional inactivation of the mel, is a more convenient cloning vector than commonly used pIJ702, because of its broad host range for antibiotic-producing Streptomyces strains and its much greater production of diffusible melanin pigment.     

A Modified MultiSite Gateway Cloning Strategy for Consolidation of Genes in Plants

The genome information is offering opportunities to manipulate genes, polygenic characters and multiple traits in plants. Although a number of approaches have been developed to manipulate traits in plants, technical hurdles make the process difficult. Gene cloning vectors that facilitate the fusion, overexpression or down regulation of genes in plant cells are being used with various degree of success. In this study, we modified gateway MultiSite cloning vectors and developed a hybrid cloning strategy which combines advantages of both traditional cloning and gateway recombination cloning. We developed Gateway entry (pGATE) vectors containing attL sites flanking multiple cloning sites and plant expression vector (pKM12GW) with specific recombination sites carrying different plant and bacterial selection markers. We constructed a plant expression vector carrying a reporter gene (GUS), two Bt cry genes in a predetermined pattern by a single round of LR recombination reaction after restriction endonuclease-mediated cloning of target genes into pGATE vectors. All the three transgenes were co-expressed in Arabidopsis as evidenced by gene expression, histochemical assay and insect bioassay. The pGATE vectors can be used as simple cloning vectors as there are rare restriction endonuclease sites inserted in the vector. The modified multisite vector system developed is ideal for stacking genes and pathway engineering in plants.     

Simple Method for Markerless Gene Deletion in Multidrug-Resistant Acinetobacter baumannii

The traditional markerless gene deletion technique based on overlap extension PCR has been used for generating gene deletions in multidrug-resistant Acinetobacter baumannii. However, the method is time-consuming because it requires restriction digestion of the PCR products in DNA cloning and the construction of new vectors containing a suitable antibiotic resistance cassette for the selection of A. baumannii merodiploids. Moreover, the availability of restriction sites and the selection of recombinant bacteria harboring the desired chimeric plasmid are limited, making the construction of a chimeric plasmid more difficult. We describe a rapid and easy cloning method for markerless gene deletion in A. baumannii, which has no limitation in the availability of restriction sites and allows for easy selection of the clones carrying the desired chimeric plasmid. Notably, it is not necessary to construct new vectors in our method. This method utilizes direct cloning of blunt-end DNA fragments, in which upstream and downstream regions of the target gene are fused with an antibiotic resistance cassette via overlap extension PCR and are inserted into a blunt-end suicide vector developed for blunt-end cloning. Importantly, the antibiotic resistance cassette is placed outside the downstream region in order to enable easy selection of the recombinants carrying the desired plasmid, to eliminate the antibiotic resistance cassette via homologous recombination, and to avoid the necessity of constructing new vectors. This strategy was successfully applied to functional analysis of the genes associated with iron acquisition by A. baumannii ATCC 19606 and to ompA gene deletion in other A. baumannii strains. Consequently, the proposed method is invaluable for markerless gene deletion in multidrug-resistant A. baumannii.     

Generating In Vivo Cloning Vectors for Parallel Cloning of Large Gene Clusters by Homologous Recombination

A robust method for the in vivo cloning of large gene clusters was developed based on homologous recombination (HR), requiring only the transformation of PCR products into Escherichia coli cells harboring a receiver plasmid. Positive clones were selected by an acquired antibiotic resistance, which was activated by the recruitment of a short ribosome-binding site plus start codon sequence from the PCR products to the upstream position of a silent antibiotic resistance gene in receiver plasmids. This selection was highly stringent and thus the cloning efficiency of the GFPuv gene (size: 0.7 kb) was comparable to that of the conventional restriction-ligation method, reaching up to 4.3 × 10⁴ positive clones per μg of DNA. When we attempted parallel cloning of GFPuv fusion genes (size: 2.0 kb) and carotenoid biosynthesis pathway clusters (sizes: 4 kb, 6 kb, and 10 kb), the cloning efficiency was similarly high regardless of the DNA size, demonstrating that this would be useful for the cloning of large DNA sequences carrying multiple open reading frames. However, restriction analyses of the obtained plasmids showed that the selected cells may contain significant amounts of receiver plasmids without the inserts. To minimize the amount of empty plasmid in the positive selections, the sacB gene encoding a levansucrase was introduced as a counter selection marker in receiver plasmid as it converts sucrose to a toxic levan in the E. coli cells. Consequently, this method yielded completely homogeneous plasmids containing the inserts via the direct transformation of PCR products into E. coli cells.     

A Versatile Zero Background T-Vector System for Gene Cloning and Functional Genomics

With the recent availability of complete genomic sequences of many organisms, high-throughput and cost-efficient systems for gene cloning and functional analysis are in great demand. Although site-specific recombination-based cloning systems, such as Gateway cloning technology, are extremely useful for efficient transfer of DNA fragments into multiple destination vectors, the two-step cloning process is time consuming and expensive. Here, we report a zero background TA cloning system that provides simple and high-efficiency direct cloning of PCR-amplified DNA fragments with almost no self-ligation. The improved T-vector system takes advantage of the restriction enzyme XcmI to generate a T-overhang after digestion and the negative selection marker gene ccdB to eliminate the self-ligation background after transformation. We demonstrate the feasibility and flexibility of the technology by developing a set of transient and stable transformation vectors for constitutive gene expression, gene silencing, protein tagging, protein subcellular localization detection, and promoter fragment activity analysis in plants. Because the system can be easily adapted for developing specialized expression vectors for other organisms, zero background TA provides a general, cost-efficient, and high-throughput platform that complements the Gateway cloning system for gene cloning and functional genomics.     

pKILLIN: a versatile positive-selection cloning vector based on the toxicity of Killin in Escherichia coli

The invention of DNA cloning over 40 years ago marked the advent of molecular biology. The technique has now become a routine practice in any modern biomedical laboratory. Although positive-selection of recombinants in DNA cloning seems to be superior to blue/white selection based on the disruption of the lacZ gene, it is rarely practiced due to its high background, lack of multiple cloning sites, and inability to express the genes of interest or purify the protein products. Here we report the creation of a new positive-selection cloning vector dubbed pKILLIN, which overcomes all of the above pitfalls. The essence behind its high cloning efficiency is the extreme toxicity and small size of the toxic domain of killin, a recently discovered p53 target gene. Insertion inactivation of killin within the multiple cloning site via either blunt- or sticky-end ligation not only serves as a highly efficient cloning trap, but also may allow any cloned genes to be expressed as His-tagged fusion proteins for subsequent purification. Thus, pKILLIN is a versatile positive-selection vector ideal for cloning PCR products, making DNA libraries, as well as routine cloning and bacterial expression of genes.     

Construction of new cloning vectors that employ the phytoene synthase encoding gene for color screening of cloned DNA inserts in Thermus thermophilus

Strains of Thermus thermophilus produce unique carotenoids called thermozeaxanthins and their colonies are light-yellow pigmented. Here, we developed a new cloning system allowing for the rapid and convenient detection of recombinants by color screening based on carotenoid production in T. thermophilus. We constructed two cloning vectors that overexpress the crtB gene encoding a phytoene synthase under the strong promoter of the slpA gene. Phytoene synthase is one of essential enzymes for the production of carotenoids. We also isolated a carotenoid-overproducing mutant that formed orange colonies. Because disruption of crtB in the carotenoid-overproducing mutant resulted in white colonies, we used the disruptant as a host strain. Whereas transformants carrying a new cloning vector, pTRK1-PRslpA-crtBcas, grew into unusual red-pigmented colonies probably because of the extreme accumulation of thermozeaxanthins, those carrying the vector with a foreign DNA inserts formed white colonies. Thus, recombinants can be detected easily by color screening (red/white screening) in T. thermophilus. This cloning system requires no additional chromogenic substrate in the medium. We also constructed a promoter-probe vector, pTRK1-crtBmcs-PP, employing the open reading frame of crtB with multiple cloning sites. Using this vector, a series of colony-color phenotypes is observed probably depending on promoter activities of foreign DNA inserts, which enables the rapid probing of promoters. These vectors are useful to simplify cloning procedures and to identify the promoters of different strengths in T. thermophilus.     

Unexpectedly rapid IS1 transposition into an Arabidopsis chromatin remodeling gene

Common cloning is often associated with instability of certain classes of DNA. Here we report on IS1 transposition as possible source of such instability. During the cloning of Arabidopsis thaliana gene into commercially available vector maintained in widely used Escherichia coli host the insertion of complete IS1 element into the intron of cloned gene was found. The transposition of the IS1 element was remarkably rapid and is likely to be sequence-specific. The use of E. coli strains that lower the copy number of vector or avoiding the presence of the problematic sequence is a solution to the inadvertent transposition of IS1. The transposition of IS1 is rare but it can occur and might confound functional studies of a plant gene.     

One step construction of PCR mutagenized libraries for genetic analysis by recombination cloning

Recombination cloning encompasses a set of technologies that transfer gene sequences between vectors through site-specific recombination. Due in part to the instability of linear DNA in bacteria, both the initial capture and subsequent transfer of gene sequences is often performed using purified recombination enzymes. However, we find linear DNAs flanked by loxP sites recombine efficiently in bacteria expressing Cre recombinase and the lambda Gam protein, suggesting Cre/lox recombination of linear substrates can be performed in vivo. As one approach towards exploiting this capability, we describe a method for constructing large (>1 × 10⁶ recombinants) libraries of gene mutations in a format compatible with recombination cloning. In this method, gene sequences are cloned into recombination entry plasmids and whole-plasmid PCR is used to produce mutagenized plasmid amplicons flanked by loxP. The PCR products are converted back into circular plasmids by transforming Cre/Gam-expressing bacteria, after which the mutant libraries are transferred to expression vectors and screened for phenotypes of interest. We further show that linear DNA fragments flanked by loxP repeats can be efficiently recombined into loxP-containing vectors through this same one-step transformation procedure. Thus, the approach reported here could be adapted as general cloning method.     

Defining the minimal length of sequence homology required for selective gene isolation by TAR cloning

The transformation-associated recombination (TAR) cloning technique allows selective and accurate isolation of chromosomal regions and genes from complex genomes. The technique is based on in vivo recombination between genomic DNA and a linearized vector containing homologous sequences, or hooks, to the gene of interest. The recombination occurs during transformation of yeast spheroplasts that results in the generation of a yeast artificial chromosome (YAC) containing the gene of interest. To further enhance and refine the TAR cloning technology, we determined the minimal size of a specific hook required for gene isolation utilizing the Tg.AC mouse transgene as a targeted region. For this purpose a set of vectors containing a B1 repeat hook and a Tg.AC-specific hook of variable sizes (from 20 to 800 bp) was constructed and checked for efficiency of transgene isolation by a radial TAR cloning. When vectors with a specific hook that was ≥60 bp were utilized, ~2% of transformants contained circular YACs with the Tg.AC transgene sequences. Efficiency of cloning dramatically decreased when the TAR vector contained a hook of 40 bp or less. Thus, the minimal length of a unique sequence required for gene isolation by TAR is ~60 bp. No transgene-positive YAC clones were detected when an ARS element was incorporated into a vector, demonstrating that the absence of a yeast origin of replication in a vector is a prerequisite for efficient gene isolation by TAR cloning.     

New shuttle vectors for Actinobacillus actinomycetemcomitans and Escherichia coli

A series of shuttle vectors for Actinobacillus actinomycetemcomitans (Aa) and Escherichia coli (Ec) was developed. These vectors carry a multiple cloning site, the lacZα reporter gene, the replication origin for Aa derived from pVT736-1 and a replicon for Ec originated from pUC, P15A or pSC101. With these vectors, cloning and expression can be effectively performed in Aa and Ec.     

Construction of a thermo-sensitive pRI857 vector for efficient DNA capturing in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Objectives

To establish a positive cloning system with a zero background for high-throughput DNA cloning purpose.

Results

The cloning vector, pRI857, and the genomic-library construction vector, pRI857-BAC, were constructed based on the mechanism of expression of the thermo-sensitive cI857 repressor gene that can stringently repress the P_R promoter and kanamycin resistance gene (P_R-kan ^R ) at 30 °C, but have no effect on P_R-kan ^R gene at 37 °C or at higher temperatures. When the pRI857 vectors were transformed into E. coli with or without a target foreign DNA fragment inserted at the BfrBI site of the cI857 gene, only colonies with the foreign DNA fragment survive. We extended this method to construct a pRI857-BAC vector for genomic library cloning which displays an efficiency of ~10⁷ cfu per µg of genomic DNA, with no empty vectors detected.

Conclusions

Cloning by indirect activation of resistance marker gene represents a novel DNA-capturing system, which can be widely applied for high-throughput DNA cloning.

     

Identification of the Propionicin F Bacteriocin Immunity Gene (pcfI) and Development of a Food-Grade Cloning System for Propionibacterium freudenreichii

This report describes the first functional analysis of a bacteriocin immunity gene from Propionibacterium freudenreichii and its use as a selection marker for food-grade cloning. Cloning of the pcfI gene (previously orf5 [located as part of the pcfABC propionicin F operon]) rendered the sensitive host 1,000-fold more tolerant to the propionicin F bacteriocin. The physiochemical properties of the 127-residue large PcfI protein resemble those of membrane-bound immunity proteins from bacteriocin systems found in lactic acid bacteria. The high level of immunity conferred by pcfI allowed its use as a selection marker for plasmid transformation in P. freudenreichii. Electroporation of P. freudenreichii IFO12426 by use of the pcfI expression plasmid pSL102 and propionicin F selection (200 bacteriocin units/ml) yielded 10⁷ transformants/μg DNA. The 2.7-kb P. freudenreichii food-grade cloning vector pSL104 consists of the pLME108 replicon, a multiple cloning site, and pcfI expressed from the constitutive P_pampS promoter for selection. The pSL104 vector efficiently facilitated cloning of the propionicin T1 bacteriocin in P. freudenreichii. High-level propionicin T1 production (640 BU/ml) was obtained with the IFO12426 strain, and the food-grade propionicin T1 expression plasmid pSL106 was maintained by ~91% of the cells over 25 generations in the absence of selection. To the best of our knowledge this is the first report of an efficient cloning system that facilitates the generation of food-grade recombinant P. freudenreichii strains.     

Isolation of Methyl Parathion-Degrading Strain M6 and Cloning of the Methyl Parathion Hydrolase Gene

A degradative bacterium, M6, was isolated and presumptively identified as Plesiomonas sp. strain M6 was able to hydrolyze methyl parathion to p-nitrophenol. A novel organophosphate hydrolase gene designated mpd was selected from its genomic library prepared by shotgun cloning. The nucleotide sequence of the mpd gene was determined. The gene could be effectively expressed in Esherichia coli.     

Isolation of laccase gene from Bacillus subtilis and analysis of its physicochemical properties

The present study reports the cloning and sequencing of lac2 from Bacillus subtilis. The gene is composed of 1542 bp and encodes a 514-amino acid protein. The gene has 86% homology with a published laccase with GeneID 936023. The lac2 gene was deposited in GenBank as a new nucleotide sequence. This new sequence was cloned into the multiple cloning site of pPIC9K to generate pPIC9K-lac2, which was then transformed into Pichia pastoris GS115 via electroporation. The recombinant GS115 (pPIC9K-lac2) was grown initially in BMGY medium and transferred to BMMY to induce gene expression for 48 h. The recombinant Lac2 protein shows laccase activity with α-naphthol and guaiacol as substrates. The optimal pH is between 3.2 and 4.7, and the optimal temperature is 25 °C for enzyme reaction.     

Expression, purification, and characterization of exo-β-d-glucosaminidase of Aspergillus sp. CJ22-326 from Escherichia coli

An exo-β-d-glucosaminidase gene was cloned from Aspergillus sp. CJ22-326 and expressed in Escherichia coli. The purified protein showed an exo-chitosanase activity in a viscosimetric assay and TLC analysis. This is the first report on cloning of a gene encoding an Aspergillus sp. exo-β-d-glucosaminidase.     

Evaluation of the efficiency and utility of recombinant enzyme-free seamless DNA cloning methods

Simple and low-cost recombinant enzyme-free seamless DNA cloning methods have recently become available. In vivo Escherichia coli cloning (iVEC) can directly transform a mixture of insert and vector DNA fragments into E. coli, which are ligated by endogenous homologous recombination activity in the cells. Seamless ligation cloning extract (SLiCE) cloning uses the endogenous recombination activity of E. coli cellular extracts in vitro to ligate insert and vector DNA fragments. An evaluation of the efficiency and utility of these methods is important in deciding the adoption of a seamless cloning method as a useful tool. In this study, both seamless cloning methods incorporated inserting DNA fragments into linearized DNA vectors through short (15–39 bp) end homology regions. However, colony formation was 30–60-fold higher with SLiCE cloning in end homology regions between 15 and 29 bp than with the iVEC method using DH5α competent cells. E. coli AQ3625 strains, which harbor a sbcA gene mutation that activates the RecE homologous recombination pathway, can be used to efficiently ligate insert and vector DNA fragments with short-end homology regions in vivo. Using AQ3625 competent cells in the iVEC method improved the rate of colony formation, but the efficiency and accuracy of SLiCE cloning were still higher. In addition, the efficiency of seamless cloning methods depends on the intrinsic competency of E. coli cells. The competency of chemically competent AQ3625 cells was lower than that of competent DH5α cells, in all cases of chemically competent cell preparations using the three different methods. Moreover, SLiCE cloning permits the use of both homemade and commercially available competent cells because it can use general E. coli recA^? strains such as DH5α as host cells for transformation. Therefore, between the two methods, SLiCE cloning provides both higher efficiency and better utility than the iVEC method for seamless DNA plasmid engineering.