Synthesis of Ag-liposome nano composites

Silver nanoparticles were synthesized and stabilized by a simple, environment-friendly method in a liposomes structure. Liposomes were prepared by facing lecithin to the aqueous-phase solutions while stirring vigorously. The ratio of lecithin concentration to silver nitrate (K_Lec/Ag?=?[Lecithin]/[AgNO₃]) is the influencing factor in the synthesis of silver nanoparticles. The stability, size distribution, and antibacterial properties of synthesized silver nanoparticles were studied by ultraviolet (UV)-visible, dynamic light scattering, and antibacterial assay. The UV spectra indicated a single symmetric extinction peak at 400?nm, confirming the spherical shape of the synthesized silver nanoparticles. A high K_Lec/Ag value leads to a reduction in the intensity of extinction spectra and increases the size of Ag-liposomes nanocomposites. The large Ag-liposomes nanocomposites are transformed to the smaller Ag-liposomes nanocomposites (from 342 to 190?nm) due to sonication treatment. The stabilized silver nanoparticles with various lecithin concentrations showed a good antibacterial activity against Staphylococcus aureus, a Gram-positive bacterium, and Escherichia coli, a Gram-negative bacterium.     

Influence of outer membrane c‐type cytochromes on particle size and activity of extracellular nanoparticles produced by Shewanella oneidensis

The metal‐reducing bacterium Shewanella oneidensis is capable of reducing various metal(loid)s and produces nanoparticles (NPs) extracellularly, in which outer membrane c‐type cytochromes (OMCs) have been suggested to play important roles. The objective of this study was to investigate the influence of the OMCs, that is, MtrC and OmcA, on the size and activity of the extracellular silver NPs (AgNPs) and silver sulfide NPs (Ag₂S NPs) produced by S. oneidensis MR‐1. We found that (i) the lack of OMCs on S. oneidensis cell surface decreased the particle size of the extracellular biogenic AgNPs and Ag₂S NPs; (ii) the biogenic AgNPs from the mutant lacking OMCs showed higher antibacterial activity; and (iii) the biogenic Ag₂S NPs from the mutant lacking OMCs exhibited higher catalytic activity in methylviologen reduction. The results suggest that it may be possible to control particle size and activity of the extracellular biogenic NPs via controlled expression of the genes encoding surface proteins. In addition, we also reveal that in extracellular biosynthesis of NPs the usually neglected non‐cell‐associated NPs could have high catalytic activity, highlighting the need of novel methods that can efficiently retain extracellular NPs in the biosynthesis processes. Biotechnol. Bioeng. 2013; 110: 1831–1837. © 2013 Wiley Periodicals, Inc.     

Antibacterial Activity and Inhibition of Adherence of Streptococcus mutans by Propolis Electrospun Fibers

Mouth-dissolving fibers with antibacterial activity for the oral cavity were prepared by an electrospinning technique. Propolis extract was used as an active ingredient and polyvinylpyrrolidone (PVP) K90 as the polymer matrix. The morphology and diameter of the fibers were characterized by scanning electron microscopy. Antibacterial activity against Streptococcus mutans and the inhibition of S. mutans adhesion on a smooth glass surface during the biofilm formation were tested. Propolis, 5% (w/v), was combined with a PVP K90 solution, 8% (w/v), with or without Tween 80 including flavor additives and electrospun with an applied voltage of 15 kV. Uniform and smooth fibers of propolis-PVP K90 were obtained. The results showed that electrospun fibers with propolis extract can dissolve and release the propolis in water. Propolis-PVP electrospun fibers showed better antibacterial activity by reduction of bacteria adhesion on a smooth glass surface when compared to some commercial mouthwash products. These results indicated the potential of electrospun fibers to be used as mouth-dissolving fibers for effective antibacterial activity in the oral cavity.KEY WORDS: antibacterial activity, electrospun fibers, inhibition of adherence, propolis, Streptococcus mutans     

Antibacterial activity of chitosan tripolyphosphate nanoparticles loaded with various metal ions

The aim of this study was to prepare and select chitosan nanoparticles loaded metal ions with high antibacterial activities. Chitosan nanoparticles were prepared based on ionic gelation between chitosan and sodium tripolyphosphate. Then, Ag⁺, Cu²⁺, Zn²⁺, Mn²⁺, or Fe²⁺ was individually loaded onto chitosan nanoparticles. Their particle sizes and zeta potentials were measured. Their antibacterial activities were evaluated by determination of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against Escherichia coli 25922, Salmonella choleraesuis ATCC 50020 and Staphylococcus aureus 25923 in vitro. Results showed that antibacterial activity was significantly enhanced by the metal ions loaded, except for Fe²⁺. Especially for chitosan nanoparticles loaded Cu²⁺, the MIC and MBC against E. coli 25922, S.choleraesuis ATCC 50020 and S. aureus 25923 were 21–42 times lower than that of Cu²⁺, respectively. Moreover, it was found that antibacterial activity was directly proportional to zeta potential.     

Photo-catalytic preparation of silver-coated TiO2 particles for antibacterial applications

Colloidal silver has been known to have unique antimicrobial activity that may be useful in the construction of antibacterial materials (self-cleaning materials) to aid in the fight against bacteria-related infections. In this study, silver-coated TiO₂ (Ag/TiO₂) particles prepared through the photo-reduction of Ag⁺ were investigated as an antibacterial agent against Escherichia coli and Staphylococcus aureus. The deposition of Ag onto the surface was confirmed with SEM and EDS analysis of the post-reaction particles. It was also determined that the initial concentration of Ag⁺ in solution played a significant role in the effective size of the post-irradiation particles. The antibacterial effectiveness of the Ag/TiO₂ was evaluated through the determination of the minimum inhibitory concentration (MIC) of AgTiO₂ for each species of bacteria. The MIC values for the Ag/TiO₂, on both E. coli and S. aureus, were much lower than the MIC values for Ag metal, and quite comparable to the MIC values for AgNO₃. A disc diffusion/antibiotic sensitivity test was also performed using the Ag/TiO₂ particles and the results compared with the results obtained for Ag metal, AgNO₃ and common antibacterial agents; tetracycline, chloramphenicol, erythromycin, and neomycin. The zone of inhibition diameters for the Ag/TiO₂ particles were found to be comparable with those of the other antimicrobial agents.     

Visible-Light-Induced Bactericidal Activity of a Nitrogen-Doped Titanium Photocatalyst against Human Pathogens

The antibacterial activity of photocatalytic titanium dioxide (TiO₂) substrates is induced primarily by UV light irradiation. Recently, nitrogen- and carbon-doped TiO₂ substrates were shown to exhibit photocatalytic activities under visible-light illumination. Their antibacterial activity, however, remains to be quantified. In this study, we demonstrated that nitrogen-doped TiO₂ substrates have superior visible-light-induced bactericidal activity against Escherichia coli compared to pure TiO₂ and carbon-doped TiO₂ substrates. We also found that protein- and light-absorbing contaminants partially reduce the bactericidal activity of nitrogen-doped TiO₂ substrates due to their light-shielding effects. In the pathogen-killing experiment, a significantly higher proportion of all tested pathogens, including Shigella flexneri, Listeria monocytogenes, Vibrio parahaemolyticus, Staphylococcus aureus, Streptococcus pyogenes, and Acinetobacter baumannii, were killed by visible-light-illuminated nitrogen-doped TiO₂ substrates than by pure TiO₂ substrates. These findings suggest that nitrogen-doped TiO₂ has potential application in the development of alternative disinfectants for environmental and medical usages.     

Surface reactivity and in vitro biological evaluation of sol gel derived silver/calcium silicophosphate bioactive glass

Ag ions are known for their antibacterial effects. Ag containing silicate glasses have been extended to create bioactive glasses that exhibit inhibitory effects on bacterial growth using different techniques. In this work, calcium and calcium/silver silicophosphate glasses were synthesized from the sol-gel process and their physicochemical and in vitro biological properties were studied and compared. The effect of silver concentration on in vitro bioactivity and antibacterial properties of the glasses was investigated. Ag₂O was substituted for CaO in the glass formula up to 2 mol% and in vitro bioactivity of the samples was evaluated by soaking them in simulated body fluid followed by structural characterization using XRD, FTIR and SEM techniques. The results showed that both glasses favored precipitation of the calcium phosphate layer when they were soaked in simulated body fluid; however, the morphology of apatite crystals changed for the 2% mol silver containing sample. Substitution of 2% mol Ag₂O for CaO seemed to slightly stimulate the rate of precipitation. The in vitro biodegradation rate of the silver/ calcium silicophosphate glasses was lower than that of the silver-free one (control). Also, the antibacterial properties of the samples indicated that these effects were improved by increasing silver concentration in bioactive glass composition.     

Cellular uptake of metal oxide-based nanocomposites and targeting of chikungunya virus replication protein nsP3

Emergence of new pathogenic viruses along with adaptive potential of RNA viruses has become a major public health concern. Therefore, it is increasingly crucial to investigate and assess the antiviral potential of nanocomposites, which is constantly advancing area of medical biology. In this study, two types of nanocomposites: Ag/NiO and Ag₂O/NiO/ZnO with varying molar ratios of silver and silver oxide, respectively have been synthesised and characterised. Three metal/metal oxide (Ag/NiO) composites having different amounts of Ag nanoparticles (NPs) anchored on NiO octahedrons are AN-5 % (5 % Ag), AN-10 % (10 % Ag) and AN-15 % (15 % Ag)) and three ternary metal oxide nanocomposites (Ag₂O/NiO/ZnO) i.e., A/N/Z-1, A/N/Z-2, and A/N/Z-3 with different molar ratios of silver oxide (10 %, 20 % and 30 %, respectively) were evaluated for their antiviral potential. Cellular uptake of nanocomposites was confirmed by ICP-MS. Intriguingly, molecular docking of metal oxides in the active site of nsP3 validated the binding of nanocomposites to chikungunya virus replication protein nsP3. In vitro antiviral potential of nanocomposites was tested by performing plaque reduction assay, cytopathic effect (CPE) analysis and qRT-PCR. The nanocomposites showed significant reduction in virus titre. Half-maximal inhibitory concentration (IC₅₀) for A/N/Z-3 and AN-5 % were determined to be 2.828 and 3.277 µg/mL, respectively. CPE observation and qRT-PCR results were consistent with the data obtained from plaque reduction assay for A/N/Z-3 and AN-5 %. These results have opened new avenues for development of nanocomposites based antiviral therapies.     

Photoluminescence emission from nanostructured porous preparations of CdS–ZnTiO3 assembled nanoparticles

This study reports the structural and optical properties of CdS/ZnTiO₃ nanocomposites prepared using a chemical bath and different titanate concentrations. Commercial ZnTiO₃ nanoparticles were introduced into a chemical bath that had been used to produce CdS semiconductor nanoparticles (NPs). Here, the growing CdS crystallites precipitated onto the suspended zinc titanate NPs. X‐ray diffraction patterns revealed that samples of CdS/ZnTiO₃ nanopowders were made of cubic ZnTiO₃ and hexagonal CdS wurtzite. The morphology of the particles was studied using transmission electron microscopy and scanning electron microscopy images. These images demonstrated the different characteristics of the CdS/ZnTiO₃ nanocomposites and their dependence on titanate concentration when placed into the CdS‐growing solution. Photoluminescence spectra showed three main emission bands for the electron transitions in the CdS/ZnTiO₃ composite. This composite produced three photoluminescence bands, the intensities of which depended on composite shape, which in turn depended on the relative concentrations of CdS and ZnTiO₃.     

Calcium-dependent antibacterial activity of donkey’s milk against <Emphasis Type="Italic">Salmonella</Emphasis>

The aim of this study was to examine the antibacterial activity of raw donkey’s milk (DM) against Salmonella Enteritidis and Salmonella Typhimurium as well as to determine the dependence of this antibacterial activity on calcium, lysozyme and lactoferrin content. Antibacterial assays were conducted in DM artificially contaminated with these Salmonella serotypes and then incubated at 38 °C for 8 hours. Calcium concentration was found to have a strong influence on the antibacterial activity of the contaminated DM samples supplemented with CaCl₂ and EDTA. The antibacterial activity of DM against the tested Salmonella strains was observed to be strongly calcium dependent, with the addition of CaCl₂ to DM samples improving its antibacterial potential against both pathogens. Salmonella Enteritidis appeared to be less sensitive to the antimicrobial agents in DM than S. Typhimurium. One explanation is the calcium-dependant antibacterial activity of DM is attributable to the calcium-binding ability of its lysozyme. Lysozyme may be the main antibacterial agent, most probably via a nonenzymatic mode of action against tested Salmonella strains.     

Photo/Electrochemical Applications of Metal Sulfide/TiO2 Heterostructures

Developing efficient and affordable catalysts is of great significance for energy and environmental sustainability. Heterostructure photocatalysts exhibit a better performance than either of the parent phases as it changes the band bending at the interfaces and provides a driving force for carrier separation, thus mitigating the effects of carrier recombination and back‐reaction. Herein, the photo/electrochemical applications of a variety of metal sulfides (MS_x) (MoS₂, CdS, CuS, PbS, SnS₂, ZnS, Ag₂S, Bi₂S₃, and In₂S₃)/TiO₂ heterojunctions are summarized, including organic degradation, water splitting, and CO₂ reduction conversion. First, a general introduction on each MS_x material (especially bandgap structures) will be given. Then the photo/electrochemical applications based on MS_x/TiO₂ heterostructures are reviewed from the perspective of light harvesting ability, charge carrier separation and transportation, and surface chemical reactions. Special focus is given to CdS/TiO₂ and PbS/TiO₂‐based quantum dot sensitized solar cells. Ternary composites by taking advantages of positive synergetic effects are also well summarized. Finally, conclusions are made regarding approaches for structure design, and the authors' perspective on future architectural design and electrode construction is given. This work will make up the gap for TiO₂ nanocomposites and shed light on the fabrication of more efficient MS_x‐metal oxide junctions in photo/electrochemical applications.     

The role of proteins of the outer membrane of <Emphasis Type="Italic">Shewanella oneidensis</Emphasis> MR-1 in the formation and stabilization of silver sulfide nanoparticles

Silver sulfide nanoparticles stable in aqueous solutions were obtained in presence of the cells of the bacterium Shewanella oneidensis MR-1 in aqueous solution containing an equimolar mixture of AgNO₃ and Na₂S₂O₃. Proteins absorbed on the surface of Ag₂S nanoparticles were identified for the first time by MALDITOF/TOF. Among these proteins, multiheme cytochromes MtrC and OmcA, as well as the MtrB membrane porin, which forms a complex on the outer cell membrane, were detected. It was shown that an insoluble precipitate consisting of agglomerated Ag₂S nanoparticles with a wide size distribution was formed in the absence of the cells. The role of the detected proteins in the mechanism of the formation and stabilization of the Ag₂S nanoparticles in the studied system is discussed.     

Zeolitic imidazolate framework-8 (ZIF-8) doped TiZSM-5 and Mesoporous carbon for antibacterial characterization

Drug resistant bacteria affects millions worldwide and remains a serious threat to health care system. The study reports the first application of hybrid nanocomposites based on zeolitic imidazolate framework-8 (ZIF-8) with MFI structured zeolite Ti-ZSM-5 (TiZ5) and mesoporous carbon (MC). The composite was designated as TiZ5/ZIF-8 and MC/ZIF-8 was studied for antibacterial activity. Bioactive components Zn²⁺ and 2-methyl imidazole present in ZIF-8 was found to exert significant antibacterial effect on Escherchia. coli and Staphyloccocus. No other antibiotic drugs are required. For comparative purpose, Fe-BTC MOF (BTC = 1,3,5‐benzenetricarboxylate) was used as second set of nanoformulations (TiZ5/Fe-BTC and MC/Fe-BTC) but showed a lower antibacterial activity. The phase (X-ray diffraction), texture (BET surface area), coordination (DRS-UV–Vis), and morphology (TEM) was investigated. XRD showed the presence of nanosized ZIF-8 over TiZ5 and MC. Surface area calculation using N₂ adsorption isotherm showed a reduction in the micropore surface area of ZIF-8 from 1148 m²/g to 224 m²/g (80%) and an increased meso surface area from 31 m²/g to 59 m²/g (90%). The mesopore pore volume increased significantly from 0.05 cm³/g to 0.12 m²/g. MC/ZIF-8 showed similar textural modifications. FT-IR spectra and DRS-UV–Vis spectra showed distinct composite formation with TiZ5, while a weak absorption of ZIF-8 observed over MC. TEM revealed the presence of nanocomposite MC/ZIF-8 and TiZ5/ZIF-8 distributed in nanosize ranging between 25 and 50 nm. TiZ5/ZIF-8 showed the minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) of 0.5 and 1 mg/ml, respectively against E. coli. The MIC and MBC of TiZ5/ZIF-8 against S. aureus were 1 and 2 mg/ml, respectively. MC/ZIF-8 composite had second best antibacterial activity. This study shows that ZIF-8 based composite holds a great potential against E. coli and S. aureus.     

Rational design of biodegradable sulphonamide candidates treating septicaemia by synergistic dual inhibition of COX-2/PGE2 axis and DHPS enzyme

A new series of co-drugs was designed based on hybridising the dihydropteroate synthase (DHPS) inhibitor sulphonamide scaffold with the COX-2 inhibitor salicylamide pharmacophore through biodegradable linkage to achieve compounds with synergistic dual inhibition of COX-2/PGE2 axis and DHPS enzyme to enhance antibacterial activity for treatment of septicaemia. Compounds 5 b, 5j, 5n and 5o demonstrated potent in vitro COX-2 inhibitory activity comparable to celecoxib. 5j and 5o exhibited ED₅₀ lower than celecoxib in carrageenan-induced paw edoema test with % PGE2 inhibition higher than celecoxib. Furthermore, 5 b, 5j and 5n showed gastric safety profile like celecoxib. Moreover, in vivo antibacterial screening revealed that, 5j showed activity against S.aureus and E.coli higher than sulfasalazine. While, 5o revealed activity against E.coli higher than sulfasalazine and against S.aureus comparable to sulfasalazine. Compound 5j achieved the target goal as potent inhibitor of COX-2/PGE2 axis and in vivo broad-spectrum antibacterial activity against induced septicaemia in mice.     

Reviving near infra‐red emission of Ag2S nanoparticles using interfacial defects in the Ag2S@CdS core–shell structure

Ag₂S@CdS core–shell particles were synthesized with different Cd source content as a measure of shell thickness using a pulsed microwave irradiation method. The particles were verified structurally using X‐ray diffraction, energy dispersive X‐ray analysis and transmission electron microscopy. Optical spectroscopy revealed that core–shells show an absorption peak at 750 nm and an emission peak located around 800 nm after 6 min of microwave irradiation. With continued microwave treatment, the NIR luminescence first vanished but it was revived after 12 min of irradiation, which was 100 nm red shifted. This new type of NIR emission in Ag₂S with sizes greater than 5 nm is due to the proximity of a highly deficient CdS shell with strong red emission that was stable for more than 6 months in water. A mechanism has been suggested for this type of emission.     

CdS/Graphene Nanocomposite Photocatalysts

Heterogeneous photocatalysis using semiconductors and renewable solar energy has been regarded as one of the most promising processes to alleviate, and even solve, both the world crises of energy supply and environmental pollution. In the past few years, many encouraging achievements have been made in the research area of graphene‐based semiconductor photocatalysts. Among them, CdS/graphene nanocomposites have attracted extensive attention as an important kind of photocatalyst in chemical and material science, due to its superior photocatalytic activity and photostability under visible‐light irradiation. The aim here is to address the enhancement mechanism of the photocatalytic performance of CdS/graphene composite photocatalysts, and systematically summarize recent progress regarding the design and synthesis of CdS/graphene nanocomposites. These nanocomposites are promising for a great diversity of applications in visible‐light photocatalytic fields, including artificial photosynthetic systems (photocatalytic hydrogen production and CO₂ reduction), environmental remediation, and organic photosynthesis. Special attention is given to the photocatalytic hydrogen production and pollutant photodegradation over CdS/graphene nanocomposite photocatalysts. Furthermore, perspectives on CdS/graphene‐based materials are discussed, including the various remaining challenges for large‐scale applications, identifying prospective areas for related research in this field.     

Photocatalytic Reduction of CO2 into Methanol over Ag/TiO2 Nanocomposites Enhanced by Surface Plasmon Resonance

Ag-loaded TiO₂ (Ag/TiO₂) nanocomposites were prepared by microwave-assisted chemical reduction method using tetrabutyl titanate as the Ti source. The prepared samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, N₂ adsorption–desorption isotherms, UV–vis absorption spectrum, X-ray photoelectron spectrum, photoluminescence spectrum, and Raman scattering spectrum, respectively. Results revealed that Ag nanoparticles (NPs) were successfully deposited on TiO₂ by reduction of Ag⁺, and the visible light absorption and Raman scattering of TiO₂ were enhanced by Ag NPs based on its surface plasmon resonance effect. Besides, Ag NPs could also effectively restrain the recombination of photogenerated electrons and holes with a longer luminescence life time. In addition, photocatalytic reduction of CO₂ with H₂O on the composites was conducted to obtain methanol. Experimental results indicated that Ag-loaded TiO₂ had better photocatalytic activity than pure TiO₂ due to the synergistic effect between UV light excitation and surface plasmon resonance enhancement, and 2.5 % Ag/TiO₂ exhibited the best activity; the corresponding energy efficiency was about 0.5 % and methanol yield was 405.2 μmol/g-cat, which was 9.4 times higher than that of pure TiO₂. Additionally, an excitation enhancement synergistic mechanism was proposed to explain the experimental results of photocatalytic reduction of CO₂ under different reaction conditions.     

Effect of CdS preparation on the photo-catalyzed decomposition of hydrogen sulfide in alkaline aqueous media

Band-gap irradiation of CdS dispersions in alkaline aqueous media (pH 14) containing 0.1 M Na₂S produces hydrogen and sulfur. The reaction is photo-decomposition of hydrogen sulfide by two quanta of visible light (λ > 400 nm). Various batches of commercially available cadmium sulfide, as well as CdS precipitated from nitrate, sulfate, and chloride solutions at neutral pH, produce different amounts of hydrogen. Electronically pure CdS (puratronic grade) generates almost no hydrogen. By contrast, CdS precipitates prepared in the presence of excess cadmium yield forty times more hydrogen than CdS prepared in the presence of excess sodium sulfide. Differences are rationalized in terms of possible surface modification and/or changes in the active sites by anions present as ‘impurities’ which could affect separation and recombination of the charge carries, e_CB⁻ and h_VB⁺, in CdS.     

The antibacterial activity of phospholipase A2 type IIA is regulated by the cooperative lipid chain melting behavior in Staphylococcus aureus

As one of its primary physiological functions, sPLA₂-IIA appears to act as an antibacterial agent. In particular, sPLA₂-IIA shows high activity towards Gram-positive bacteria such as Staphylococcus aureus (S. aureus). This antibacterial activity results from the preference of the enzyme towards membranes enriched in anionic lipids, which is a common feature of bacterial membranes. An intriguing aspect observed in a variety of bacterial membranes is the presence of a broad but cooperative lipid chain melting event where the lipids in the membrane transition from a solid-ordered (so) into a liquid-disordered (ld) state close to physiological temperatures. It is known that the enzyme is sensitive to the level of lipid packing, which changes sharply between the so and the ld states. Therefore, it would be expected that the enzyme activity is regulated by the bacterial membrane thermotropic behavior. We determine by FTIR the thermotropic lipid chain melting behavior of S. aureus and find that the activity of sPLA₂-IIA drops sharply in the so state. The activity of the enzyme is also evaluated in terms of its effects on cell viability, showing that cell survival increases when the bacterial membrane is in the so state during enzyme exposure. These results point to a mechanism by which bacteria can develop increased resistance towards antibacterial agents that act on the membrane through a cooperative increase in the order of the lipid chains. These results show that the physical behavior of the bacterial membrane can play an important role in regulating physiological function in an in vivo system.     

Comparative Study of Antimicrobial Activity of AgBr and Ag Nanoparticles (NPs)

The diverse mechanism of antimicrobial activity of Ag and AgBr nanoparticles against gram-positive and gram-negative bacteria and also against several strains of candida was explored in this study. The AgBr nanoparticles (NPs) were prepared by simple precipitation of silver nitrate by potassium bromide in the presence of stabilizing polymers. The used polymers (PEG, PVP, PVA, and HEC) influence significantly the size of the prepared AgBr NPs dependently on the mode of interaction of polymer with Ag⁺ ions. Small NPs (diameter of about 60–70 nm) were formed in the presence of the polymer with low interaction as are PEG and HEC, the polymers which interact with Ag⁺ strongly produce nearly two times bigger NPs (120–130 nm). The prepared AgBr NPs were transformed to Ag NPs by the reduction using NaBH₄. The sizes of the produced Ag NPs followed the same trends – the smallest NPs were produced in the presence of PEG and HEC polymers. Prepared AgBr and Ag NPs dispersions were tested for their biological activity. The obtained results of antimicrobial activity of AgBr and Ag NPs are discussed in terms of possible mechanism of the action of these NPs against tested microbial strains. The AgBr NPs are more effective against gram-negative bacteria and tested yeast strains while Ag NPs show the best antibacterial action against gram-positive bacteria strains.